Select host for image upload
by C Williams
Hello,
I am having problems selecting the host that I want to use for .iso and
other image uploads via the oVirt Web Console. I have 20+ servers of
varying speeds.
Somehow oVirt keeps wanting to select my oldest and slowest system to use
for image uploads.
Please Help !
Thank You !
C Williams
4 years
Q: Failed creating snapshot
by Andrei Verovski
Hi,
I have oVirt 4.4 with nodes 4.2.8
Attempt to create snapshot failed with:
EventID 10802 VDSM node11 command SnapshotVDS failed: Message timeout can be caused by communication issues.
Event ID 2022 Add-disk operation failed to complete.
However, snapshot is on disk since VM now takes 1200GB instead of 500.
Yes snapshot list in VM details is empty.
How to recover disk space occupied by unsuccessful snapshot ?
I looked at /vmraid/nfs/disks/xxxx-xxxx-xxx/images
and there are no distinctive files which I can identify as snapshot.
Thanks in advance.
Andrei
4 years
Question about OVN MTU
by Strahil Nikolov
Hello All,
I would like to learn more about OVN and especially the maximum MTU that I can use in my environment.
Current Setup 4.3.10
Network was created via UI -> MTU Custom -> 8976 -> Create on External Provider -> Connect to Physical Network
So my physical connection is MTU 9000 and I have read that Geneve uses 24 bits (maybe that's wrong ?) , thus I have reduced the MTU to 8976.
I did some testing on the VMs and ping with payload of '8914' was the maximum I could pass without fragmenting and thus the MTU on the VMs was set to 8942.
Did I correctly configure the test network's MTU and am I understanding it correctly that we need extra 34 bits inside the network for encapsulation ?
I have checked https://www.ovirt.org/develop/release-management/features/network... but I don't see any refference how to calculate the max MTU.
Best Regards,
Strahil Nikolov
4 years
Training Video or document or training session
by info＠worldhostess.com
Can someone recommend a training video of some kind of step by step document
to do the installation and administration for OVirt? Or if someone that
wants to do a one on one online training? I would be super excited to do
online training.
I have been trying many time to install and I am sure I make some mistakes
because I can't get OVirt to work properly.
I have done numerous installations during the last few weeks.
Yours Sincerely,
Henni
4 years
oVirt 4.3.10 RHEL 7.9 support
by KSNull Zero
Hello!
Does oVirt 4.3.10 supports RHEL 7.9 hosts ?
Is it safe to update ovirt 4.3.10 hosts to the latest RHEL 7.9 ?
Thank you.
4 years
Install test lab single host HCI with plain CentOS as OS
by Gianluca Cecchi
Hello,
if I want to install a test lab environment of type single host HCI and
want to use CentOS 8.2 as the OS for the host, can I still use the
graphical wizard from cockpit? I see it accessing the server...
Or is it thought only to be run from ovirt-node-ng system?
In case it is not possible is there a command line workflow I can use to
get the same as the wizard playbook run?
BTW: I want to use CentOS for this test lab because I need to install
custom packages (for performance counters and other things) so I'd prefer
the flexibility to have a plain CentOS and not the NG node.
Thanks in advance,
Gianluca
4 years
Add Node to a single node installation with self hosted engine.
by Marcel d'Heureuse
Hi,
I got a problem with my Ovirt installation. Normally we deliver Ovirt as
single node installation and we told our service guys if the internal
client will have more redundancy we need two more server and add this to
the single node installation. i thought that no one would order two new
servers.
Now I have the problem to get the system running.
First item is, that this environment has no internet access. So I can't
install software by update with yum.
The Ovirt installation is running on Ovirt node 4.3.9 boot USB Stick. All
three servers have the same software installed.
On the single node I have installed the hosted Engine package 1,1 GB to
deploy the self-hosted engine without internet. That works.
Gluster, Ovirt, Self-Hosted engine are running on the server 01.
What should I do first?
Deploy the Glusterfs first and then add the two new hosts to the single
node installation?
Or should I deploy a new Ovirt System to the two new hosts and add later
the cleaned host to the new Ovirt System?
I have not found any items in this mailing list which gives me an idea
what I should do now.
Br
Marcel
4 years
Re: vdsm with NFS storage reboot or shutdown more than 15 minutes. with error failed to unmount /rhev/data-center/mnt/172.18.81.14:_home_nfs_data: Device or resource busy
by Strahil Nikolov
That's not expected. You definately need to check the Engine's logs (on the Hosted or Dedicated Engine system) and the vdsm logs on the host.
Usually , the first step is to "evacuate" (live migrate) all VMs from the Host and if it fails to do that in a reasonable timeframe - the maintenance is cancelled.Next it will set the host into maintenance and most probably (not sure about this one) the engine will assign a new host as SPM.
Best Regards,
Strahil Nikolov
В сряда, 28 октомври 2020 г., 05:04:44 Гринуич+2, lifuqiong(a)sunyainfo.com <lifuqiong(a)sunyainfo.com> написа:
Hi, Strahil,
Thank you for your reply.
I've try setting host to maintenance and the host reboot immediately, What does vdsm do when setting host to maintenance? Thank you
Best Regards
Mark Lee
> From: Strahil Nikolov via Users
> Date: 2020-10-27 23:44
> To: users; lifuqiong(a)sunyainfo.com
> Subject: [ovirt-users] Re: vdsm with NFS storage reboot or shutdown more than 15 minutes. with error failed to unmount /rhev/data-center/mnt/172.18.81.14:_home_nfs_data: Device or resource busy
> When you set a host to maintenance from oVirt API/UI, one of the tasks is to umount any shared storage (incluing the NFS you got). Then rebooting should work like a charm.
>
>
>
> Why did you reboot without putting the node in maintenance ?
>
>
>
> P.S.: Do not confuse rebooting with fencing - the latter kills the node ungracefully in order to safely start HA VMs on another node.
>
>
>
> Best Regards,
>
> Strahil Nikolov
>
>
>
>
>
>
>
>
>
>
>
>
>
> В вторник, 27 октомври 2020 г., 10:27:01 Гринуич+2, lifuqiong(a)sunyainfo.com <lifuqiong(a)sunyainfo.com> написа:
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Hi everyone:
>
> Description of problem:
>
>
>
> When exec "reboot" or "shutdown -h 0" cmd on vdsm server, the vdsm server will reboot or shutdown more than 30 minutes. the screen shows '[FAILED] Failed unmouting /rhev/data-center/mnt/172.18.81.41:_home_nfs_data'.
>
> other messages may be useful: [] watchdog: watchdog0: watchdog did not stop! []systemd-shutdown[5594]: Failed to unmount /rhev/data-center/mnt/172.18.81.14:_home_nfs_data: Device or resource busy
>
> []systemd-shutdown[1]: Failed to wait for process: Protocol error
>
> []systemd-shutdown[5595]: Failed to remount '/' read-only: Device or resource busy
>
> []systemd-shutdown[1]: Failed to wait for process: Protocol error
>
> dracut Warning: Killing all remaining processes
>
> dracut Warning: Killing all remaining processes
>
>
>
> Version-Release number of selected component (if applicable):
>
> Software Version:4.2.8.2-1.el7
>
> OS: CentOS Linux release 7.5.1804 (Core)
>
> How reproducible:
>
> 100%
>
> Steps to Reproduce:
>
> 1. my test enviroment is one Ovirt engine(172.17.81.17) with 4 vdsm servers, exec "reboot" cmd in one of the vdsm servers(172.17.99.105), the server will reboot more than 30 minutes.ovirt-engine : 172.17.81.17/16
>
> vdsm: 172.17.99.105/16
>
> nfs server: 172.17.81.14/16Actual results:
>
> As above. the server will reboot more than 30 minutes
>
> Expected results:
>
> the server will reboot in a short time.
>
> What I have done:
>
> I have capture packet in nfs server while vdsm is rebooting, I found vdsm is always sending nfs packet to nfs server circularly as follows:this is some log files while I reboot vdsm 172.17.99.105 in 2020-10-26 22:12:34. Some conclusion is:
>
> 1. the vdsm.log said the vdsm 2020-10-26 22:12:34,461+0800 ERROR (check/loop) [storage.Monitor] Error checking path /rhev/data-center/mnt/172.18.81.14:_home_nfs_data/02c4c6ea-7ca9-40f1-a1d0-f1636bc1824e/dom_md/metadata
>
> 2. the sanlock.log said 2020-10-26 22:13:05 1454 [3301]: s1 delta_renew read timeout 10 sec offset 0 /rhev/data-center/mnt/172.18.81.14:_home_nfs_data/02c4c6ea-7ca9-40f1-a1d0-f1636bc1824e/dom_md/ids
>
> 3. there is nothing message import to this issue.The logs is in the attachment.I'm very appreciate if anyone can help me. Thank you.
>
> _______________________________________________
>
> Users mailing list -- users(a)ovirt.org
>
> To unsubscribe send an email to users-leave(a)ovirt.org
>
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
>
> oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
>
> List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/C2GATAD35SU...
>
> _______________________________________________
>
> Users mailing list -- users(a)ovirt.org
>
> To unsubscribe send an email to users-leave(a)ovirt.org
>
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
>
> oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
>
> List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/T3ETYUH2QDB...
>
4 years
