[ANN] oVirt 4.4.9 Third Release Candidate is now available for testing
by Sandro Bonazzola
oVirt 4.4.9 Third Release Candidate is now available for testing
The oVirt Project is pleased to announce the availability of oVirt 4.4.9
Third Release Candidate for testing, as of October 15th, 2021.
This update is the ninth in a series of stabilization updates to the 4.4
series.
Documentation
-
If you want to try oVirt as quickly as possible, follow the instructions
on the Download <https://ovirt.org/download/> page.
-
For complete installation, administration, and usage instructions, see
the oVirt Documentation <https://ovirt.org/documentation/>.
-
For upgrading from a previous version, see the oVirt Upgrade Guide
<https://ovirt.org/documentation/upgrade_guide/>.
-
For a general overview of oVirt, see About oVirt
<https://ovirt.org/community/about.html>.
Important notes before you try it
Please note this is a pre-release build.
The oVirt Project makes no guarantees as to its suitability or usefulness.
This pre-release must not be used in production.
Installation instructions
For installation instructions and additional information please refer to:
https://ovirt.org/documentation/
This release is available now on x86_64 architecture for:
* Red Hat Enterprise Linux 8.4 or similar
* CentOS Stream 8
This release supports Hypervisor Hosts on x86_64 and ppc64le architectures
for:
* Red Hat Enterprise Linux 8.4 or similar
* CentOS Stream 8
* oVirt Node 4.4 based on CentOS Stream 8 (available for x86_64 only)
See the release notes [1] for installation instructions and a list of new
features and bugs fixed.
Notes:
- oVirt Appliance is already available based on CentOS Stream 8
- oVirt Node NG is already available based on CentOS Stream 8
Additional Resources:
* Read more about the oVirt 4.4.9 release highlights:
http://www.ovirt.org/release/4.4.9/
* Get more oVirt project updates on Twitter: https://twitter.com/ovirt
* Check out the latest project news on the oVirt blog:
http://www.ovirt.org/blog/
[1] http://www.ovirt.org/release/4.4.9/
[2] http://resources.ovirt.org/pub/ovirt-4.4-pre/iso/
--
Sandro Bonazzola
MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV
Red Hat EMEA <https://www.redhat.com/>
sbonazzo(a)redhat.com
<https://www.redhat.com/>
*Red Hat respects your work life balance. Therefore there is no need to
answer this email out of your office hours.*
3 years, 1 month
Public Glance repository for oVirt
by p.staniforth＠leedsbeckett.ac.uk
Hello,
can anyone get to the public openstack image repository ovirt-image-repository?
Also when I try browse the site I get
This site can’t be reached
https://glance.ovirt.org/ is unreachable.
ERR_ADDRESS_UNREACHABLE
Regards,
Paul S.
3 years, 1 month
How to add a note to a VM
by Gianluca Cecchi
Hello,
I know there are the "Comment" and "Description" columns available in many
areas of the Webadmin Gui.
But there are some tasks, like "shutdown VM" or "Management -> Maintenance"
for a host, where I can specify a "reason" for doing that task and then a
note icon appears, aside the object, with the mouse over showing the note
text, like in this image:
https://drive.google.com/file/d/1v3Yd2t7AtuRFMT6HPFYYZqYUmJLMHYMY/view?us...
Is there a way to do it in general? So for example I have a VM and I want
to put a note (for some colleague, or to remind me to do an action
tomorrow, ecc...)
And btw: how can I manually remove the note? Eg I shutdown a VM and fill in
the "Reason" field and then in a second moment I want to remove it....
Thanks in advance,
Gianluca
3 years, 1 month
Hosted Engine ansible runner artifacts cleanup
by Erez Zarum
Hey,
I can't get the artifacts to cleanup, i have configured the ansible runner config.yml but it seems not to be running.
Should i restart the ovirt-engine service?
What is the best way to manually cleanup the artifacts (i can't get the correct ansible-runner command to clean it up) as it is starting to fill up disk space
Thanks
3 years, 1 month
Re: fresh hyperconverged Gluster setup failed in ovirt 4.4.8
by Ax Olmos
The problem is that the ‘glusterd_brick_t’ file context is missing from selinux-policy-targeted 3.14.3-80 on CentOS 8 Stream.
It exists in the CentOS 8.4 version:
rpm -qpl selinux-policy-targeted-3.14.3-67.el8_4.2.noarch.rpm | grep gluster
/usr/share/selinux/targeted/default/active/modules/100/glusterd
/usr/share/selinux/targeted/default/active/modules/100/glusterd/cil
/usr/share/selinux/targeted/default/active/modules/100/glusterd/lang_ext
/var/lib/selinux/targeted/active/modules/100/glusterd
/var/lib/selinux/targeted/active/modules/100/glusterd/cil
/var/lib/selinux/targeted/active/modules/100/glusterd/hll
/var/lib/selinux/targeted/active/modules/100/glusterd/lang_ext
Not on CentOS 8 Stream:
rpm -qpl selinux-policy-targeted-3.14.3-80.el8.noarch.rpm | grep gluster
You can remove the selinux checks from:
/etc/ansible/roles/gluster.infra/roles/backend_setup/tasks/mount.yml
but I’m not sure of the implications of that.
This is a show stopper for oVirt and someone from oVirt needs to contact the CentOS 8 Stream maintainers and have them put the selinux context back, or come up with some other workaround.
3 years, 1 month
Slow gluster replication
by David White
I can't remember if I've asked this already, or if someone else has brought this up.
I have noticed that gluster replication in a hyperconverged environment is very slow.
I just (successfully, this time) added a brick to volume that was originally built on a single-node Hyperconverged cluster.
One of my volumes has over 600GB, but the network is 10Gbps, so replication really shouldn't take that long.
It's been over two hours, and that volume has only replicated a little over 400GB. It feels like it's taking about 1GB every 30 seconds - 1 minute or so...
Why would this replication be so slow?
Sent with ProtonMail Secure Email.
3 years, 1 month
I can't create local network (oVirt 4.4.8)
by vasko.job＠gmail.com
ovirt hypervisor 4.4.8
NFS store on two 1Tb HDD (RAID 1)
Task:
Create local network with virtual gateway, dhcp server and dns server.
Scheme:
Gateway-VM (eth0 look to external network over ovirtmgmt bridge, eth1 look to internal network, DHCP, DNS)
VM1 (eth0 look to local network)
VM2 (eth0 look to local network)
VMn (eth0 look to local network)
Problem:
I can't set up a local network. There is no traffic between virtual machines.
Screenshots on my google drive:
https://photos.google.com/share/AF1QipNghoM8WGj2gpw_KkbaCVxA71mr54Jgkdtkl...
Please help...
3 years, 1 month
I can't create local network (oVirt 4.4.8)
by vasko.job＠gmail.com
ovirt hypervisor 4.4.8
NFS store on two 1Tb HDD (RAID 1)
Task:
Create local network with virtual gateway, dhcp server and dns server.
Scheme:
Gateway-VM (eth0 look to external network over ovirtmgmt bridge, eth1 look to internal network, DHCP, DNS)
VM1 (eth0 look to local network)
VM2 (eth0 look to local network)
VMn (eth0 look to local network)
Problem:
I can't set up a local network. There is no traffic between virtual machines.
Screenshots on my google drive:
https://photos.google.com/share/AF1QipNghoM8WGj2gpw_KkbaCVxA71mr54Jgkdtkl...
Please help...
3 years, 1 month
Configuring LUNS for self-hosted engine install
by Virden, Gerald
Hi,
I have a host with two 16TB LUNS that I want to deploy a self-hosted engine on. I have so far been unsuccessful; the install either fails or hangs and Oracle is saying it is due to storage. I can see both LUNS with multipath -ll. Does anyone know of step by step instructions on what to do to configure the LUNS so the engine will see them and set up the storage domain?
Jerry
3 years, 1 month
