June 2021 - Users - Ovirt List Archives

by Jayme

Are there currently any known issues with using libgfapi in the latest stable version of ovirt in hci deployments? I have recently enabled it and have noticed a significant (over 4x) increase in io performance on my vms. I’m concerned however since it does not seem to be an ovirt default setting. Is libgfapi considered safe and stable to use in ovirt 4.3 hci?

3 years, 4 months

9
16
0 / 0

Node 4.4.6 and Gluster deployment issues

by coradat＠gmail.com

Been beating my head against this for a while, but I'm having issues deploying a new 4.4.6 node hyperconverged cluster. It's a homelab/dev environment, so it's on pretty outdated hardware, SuperMicro X8DTT based systems. No on board raid controller, so that should help at least. Storage drives are a software raid 0 of two 1T SSDs at /dev/md/ovstore and disk traffic is on a separate network from management traffic; ssh-copy-id was run for both interfaces. It looks like it fails when trying to create the volume group on the VDO but I cannot figure out why it's excluded. /etc/lvm/lvm.conf is (should be) default from the install, raid is formatted with no partitions, and I've done a wipefs on the raid. I've been able to complete the same install on these devices with Node 4.3.9, but not 4.4.6. Logs are available at https://pastebin.com/yBzUpe3c

3 years, 4 months

2
1
0 / 0

libvirt 7.4 update breaking ovirt 4.4.6 on centos 8 stream

by Klaas Demter

Hi, I updated packages on my system today and ovirt is no longer starting, turns out this is happening because of a selinux denial for a new feature of libvirt-7.4.0-1.el8s.x86_64 https://bugzilla.redhat.com/show_bug.cgi?id=1966842 a workaround is suggested in the ticket or you can set selinux to permissive until selinux-policy is updated. Greetings Klaas

3 years, 4 months

4
5
0 / 0

OVF_STORE update error

by whiteplant02＠gmail.com

hi. I use automatic translation, not English as my main language. Please note that this is a difficult expression to understand. I have an NFS storage domain that I used with ovirt 4.4 and I imported it with oracle linux virtualization manager 4.3. As a result, OVF_STORE fails to update. Failed to update VMs/Templates OVF data for Storage Domain [Domain Name] in Data Center [DC Name]. Failed to update OVF disks [OVF_STORE1_diskID],[OVF_STORE2_diskID], OVF data ins't updated on those OVF stores (Data Center [DC Name], Storage Domain [Domain Name]). In addition, there was the following log. [org.ovirt.engine.core.bll.storage.ovfstore.UploadStreamCommant] (EE-ManagedThreadFactory-engineScheduled-Thread-100) [4859c0db] Validation of action 'UploadStream' failed for user SYSTEM. Reasons: VAR__TYPE__STORAGE__DOMAIN,ACTION_TYPE_FAILED_DISK_VOLUME_TYPE_UNSUPPORTED,$volumeTypeSparse,$supportedVolumeTypes Preallocated With ovirt 4.4, OVF STORE is created with thin provisioning. With olvm4.3, I think the problem is that OVF_STORE is created in Preallocated. Is there a way to fix it while the virtual machine is still running? Thank you.

3 years, 4 months

1
0
0 / 0

Host reinstall from engine

by Harry O

Hi, Should the engine not deploy gluster when host reinstall is ran? How do I deploy my gluster setup on a replacement node replacing a dead node?

3 years, 4 months

2
2
0 / 0

Re: oVirt and ARM

by Sandro Bonazzola

Il giorno ven 25 giu 2021 alle ore 14:20 Marko Vrgotic < M.Vrgotic(a)activevideo.com> ha scritto: > Hi Sandro, > > > > Thank you for the update. I am not equipped to help on development side, > but I can most certainly do test deployments, once there is something > available. > > > > We are big oVirt shop and moving to ARM64 with new product, it would be > great if oVirt would start supporting it. > > > > If we are able to help somehow, let me know. > I guess a start could be adding some arm64 machine to oVirt infrastructure so developers can build for it. You can have a look at https://ovirt.org/community/get-involved/donate-hardware.html Looping in +Evgheni Dereveanchin <ederevea(a)redhat.com> in case you can share some resources. > > > ----- > > kind regards/met vriendelijke groeten > > > > Marko Vrgotic > Sr. System Engineer @ System Administration > > > ActiveVideo > > *e:* m.vrgotic(a)activevideo.com > *w: *www.activevideo.com > > > > ActiveVideo Networks BV. Mediacentrum 3745 Joop van den Endeplein 1.1217 > WJ Hilversum, The Netherlands. The information contained in this message > may be legally privileged and confidential. It is intended to be read only > by the individual or entity to whom it is addressed or by their designee. > If the reader of this message is not the intended recipient, you are on > notice that any distribution of this message, in any form, is strictly > prohibited. If you have received this message in error, please immediately > notify the sender and/or ActiveVideo Networks, LLC by telephone at +1 > 408.931.9200 and delete or destroy any copy of this message. > > > > > > > > *From: *Sandro Bonazzola <sbonazzo(a)redhat.com> > *Date: *Thursday, 24 June 2021 at 18:21 > *To: *Marko Vrgotic <M.Vrgotic(a)activevideo.com>, Zhenyu Zheng < > zhengzhenyulixi(a)gmail.com>, Joey Ma <majunjiev(a)gmail.com> > *Cc: *users(a)ovirt.org <users(a)ovirt.org> > *Subject: *Re: [ovirt-users] oVirt and ARM > > ***CAUTION: This email originated from outside of the organization. Do not > click links or open attachments unless you recognize the sender!!!*** > > > > > > Il giorno gio 24 giu 2021 alle ore 16:34 Marko Vrgotic < > M.Vrgotic(a)activevideo.com> ha scritto: > > Hi oVirt, > > > > Where can I find if there are any information about oVirt supporting arm64 > CPU architecture? > > > > Right now oVirt is not supporting arm64. There was an initiative about > supporting it started some time ago from openEuler ovirt SIG. > > I didn't got any further updates on this topic, looping in those who I > remember being looking into it. > > I think that if someone contributes arm64 support it would also be a > feature worth a 4.5 release :-) > > > > > > ----- > > kind regards/met vriendelijke groeten > > > > Marko Vrgotic > Sr. System Engineer @ System Administration > > > ActiveVideo > > *o: *+31 (35) 6774131 > > *m: +*31 (65) 5734174 > > *e:* m.vrgotic(a)activevideo.com > *w: *www.activevideo.com > > > > ActiveVideo Networks BV. Mediacentrum 3745 Joop van den Endeplein 1.1217 > WJ Hilversum, The Netherlands. The information contained in this message > may be legally privileged and confidential. It is intended to be read only > by the individual or entity to whom it is addressed or by their designee. > If the reader of this message is not the intended recipient, you are on > notice that any distribution of this message, in any form, is strictly > prohibited. If you have received this message in error, please immediately > notify the sender and/or ActiveVideo Networks, LLC by telephone at +1 > 408.931.9200 and delete or destroy any copy of this message. > > > > > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > <https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovi...> > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > <https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovi...> > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/MQ3XND2NKIL... > <https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.o...> > > > > > -- > > *Sandro Bonazzola* > > MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV > > Red Hat EMEA > <https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.red...> > > sbonazzo(a)redhat.com > > > <https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.red...> > > *Red Hat respects your work life balance. Therefore there is no need to > answer this email out of your office hours.* > > > -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/> *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

3 years, 4 months

3
2
0 / 0

VMs traffic cannot go outside host

by deyaa112006＠hotmail.com

Hi trying to get hands on ovirt virtualization. built a test environment on vmware workstation: - 2 VMs running centos7 as ovirt Hosts - 1 VM running centos 7 as ovirt-manager on ovirt Hosts: [root@ovirt-node1 ~]# rpm -q cockpit-ovirt-dashboard qemu-kvm-ev libvirt virt-install bridge-utils vdsm cockpit-ovirt-dashboard-0.13.10-1.el7.noarch qemu-kvm-ev-2.12.0-44.1.el7_8.1.x86_64 libvirt-4.5.0-36.el7_9.5.x86_64 virt-install-1.5.0-7.el7.noarch bridge-utils-1.5-9.el7.x86_64 vdsm-4.30.46-1.el7.x86_64 on ovirt-manager: [oVirt shell (connected)]# info backend version: 4.3.10 sdk version : 4.3.4 cli version : 3.6.9.2 python version : 2.7.5.final.0 entry point : https://ovirt-manager.home.lab/ovirt-engine/api I created two ovirt VMs, running ubuntu16, on the same VM Networks "vmnet-02" Both VMs' traffic cannot go outside hosts (i.e they can reach each others only if they run on the same host) need help fix this please! [d@dv6 ~]$ ovirt-node2 Last login: Mon Jun 28 15:25:12 2021 from 10.0.1.1 [root@ovirt-node2 ~]# ifconfig ens32: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 ether 00:0c:29:d2:71:10 txqueuelen 1000 (Ethernet) RX packets 5388529 bytes 7970598031 (7.4 GiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 287643 bytes 124694822 (118.9 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 ens34: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 ether 00:0c:29:d2:71:1a txqueuelen 1000 (Ethernet) RX packets 6574 bytes 637208 (622.2 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 3573 bytes 393479 (384.2 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 genev_sys_6081: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 65000 ether fe:66:e6:5e:51:f8 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 loop txqueuelen 1000 (Local Loopback) RX packets 15152 bytes 3732985 (3.5 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 15152 bytes 3732985 (3.5 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 ovirtmgmt: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 10.0.1.22 netmask 255.255.255.0 broadcast 10.0.1.255 ether 00:0c:29:d2:71:10 txqueuelen 1000 (Ethernet) RX packets 308773 bytes 7630918499 (7.1 GiB) RX errors 0 dropped 42 overruns 0 frame 0 TX packets 253627 bytes 92412626 (88.1 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 vmnet-02: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.57.146 netmask 255.255.255.0 broadcast 192.168.57.255 ether 00:0c:29:d2:71:1a txqueuelen 1000 (Ethernet) RX packets 9367 bytes 640524 (625.5 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 1015 bytes 248111 (242.2 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 vnet0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 ether fe:6f:b4:ee:00:01 txqueuelen 1000 (Ethernet) RX packets 6483 bytes 289530 (282.7 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 5120 bytes 480414 (469.1 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 [root@ovirt-node2 ~]# [root@ovirt-node2 ~]# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 10.0.1.254 0.0.0.0 UG 0 0 0 ovirtmgmt 10.0.1.0 0.0.0.0 255.255.255.0 U 0 0 0 ovirtmgmt 169.254.0.0 0.0.0.0 255.255.0.0 U 1023 0 0 ovirtmgmt 192.168.57.0 0.0.0.0 255.255.255.0 U 0 0 0 vmnet-02 Here I can access the guest VM: [root@ovirt-node2 ~]# ssh sysadmin(a)10.0.1.44 sysadmin(a)10.0.1.44's password: sysadmin@ubuntu16-1:~$ ifconfig ens4 Link encap:Ethernet HWaddr 56:6f:b4:ee:00:01 inet addr:10.0.1.44 Bcast:10.0.1.255 Mask:255.255.255.0 inet6 addr: fe80::546f:b4ff:feee:1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:312 errors:0 dropped:0 overruns:0 frame:0 TX packets:1834 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:75924 (75.9 KB) TX bytes:87332 (87.3 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:1136 errors:0 dropped:0 overruns:0 frame:0 TX packets:1136 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1 RX bytes:105288 (105.2 KB) TX bytes:105288 (105.2 KB) sysadmin@ubuntu16-1:~$ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 10.0.1.254 0.0.0.0 UG 0 0 0 ens4 10.0.1.0 0.0.0.0 255.255.255.0 U 0 0 0 ens4 but from the other host "node1" I cannot.

3 years, 4 months

1
0
0 / 0

hosted-engine cannot can't communicate with vm

by Harry O

The VM is up and the ids match, but it fail when I try anything. hosted-engine --vm-shutdown Command VM.shutdown with args {'vmID': '350a168a-beb9-4417-9fbd-5a8121863a57', 'delay': '120', 'message': 'VM is shutting down!'} failed: (code=1, message=Virtual machine does not exist: {'vmId': '350a168a-beb9-4417-9fbd-5a8121863a57'}) virsh list Id Name State ------------------------------ 2 HostedEngine running virsh domuuid HostedEngine 350a168a-beb9-4417-9fbd-5a8121863a57 MainThread::ERROR::2021-06-17 09:58:54,537::hosted_engine::953::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_stop_engine_vm) Failed to stop engine VM: Command VM.destroy with args {'vmID': '350a168a-beb9-4417-9fbd-5a8121863a57'} failed: (code=1, message=Virtual machine does not exist: {'vmId': '350a168a-beb9-4417-9fbd-5a8121863a57'}) MainThread::INFO::2021-06-17 09:58:54,563::brokerlink::73::ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink::(notify) Success, was notification of state_transition (EngineForceStop-ReinitializeFSM) sent? ignored MainThread::INFO::2021-06-17 09:58:54,569::hosted_engine::517::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_monitoring_loop) Current state ReinitializeFSM (score: 0) MainThread::INFO::2021-06-17 09:59:04,654::brokerlink::73::ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink::(notify) Success, was notification of state_transition (ReinitializeFSM-EngineDown) sent? ignored MainThread::INFO::2021-06-17 09:59:04,738::hosted_engine::517::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_monitoring_loop) Current state EngineDown (score: 3400) MainThread::INFO::2021-06-17 09:59:13,759::states::472::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(consume) Engine down and local host has best score (3400), attempting to start engine VM MainThread::INFO::2021-06-17 09:59:13,796::brokerlink::73::ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink::(notify) Success, was notification of state_transition (EngineDown-EngineStart) sent? ignored MainThread::INFO::2021-06-17 09:59:13,888::hosted_engine::517::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_monitoring_loop) Current state EngineStart (score: 3400) MainThread::INFO::2021-06-17 09:59:13,903::hosted_engine::895::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_clean_vdsm_state) Ensuring VDSM state is clear for engine VM MainThread::INFO::2021-06-17 09:59:13,909::hosted_engine::907::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_clean_vdsm_state) Vdsm state for VM clean MainThread::INFO::2021-06-17 09:59:13,909::hosted_engine::853::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_start_engine_vm) Starting vm using `/usr/sbin/hosted-engine --vm-start` MainThread::INFO::2021-06-17 09:59:14,444::hosted_engine::862::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_start_engine_vm) stdout: VM in WaitForLaunch MainThread::INFO::2021-06-17 09:59:14,444::hosted_engine::863::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_start_engine_vm) stderr: Command VM.getStats with args {'vmID': '350a168a-beb9-4417-9fbd-5a8121863a57'} failed: (code=1, message=Virtual machine does not exist: {'vmId': '350a168a-beb9-4417-9fbd-5a8121863a57'}) MainThread::INFO::2021-06-17 09:59:14,444::hosted_engine::875::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_start_engine_vm) Engine VM started on localhost MainThread::INFO::2021-06-17 09:59:14,472::brokerlink::73::ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink::(notify) Success, was notification of state_transition (EngineStart-EngineStarting) sent? ignored MainThread::INFO::2021-06-17 09:59:14,479::hosted_engine::517::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_monitoring_loop) Current state EngineStarting (score: 3400)

3 years, 4 months

3
4
0 / 0

[italian community] Geek talk and RH018 training

by Sandro Bonazzola

Hi, not relevant for everyone in the list but maybe interesting for the oVirt Italian community: I'll be in a live stream event today with Extraordy within the GeekTalk series[1]. There will also be a free Red Hat "RH018 - Virtualization and Infrastructure Migration Technical Overview" Training in Italian language on July 2nd where we'll talk also about oVirt[2]. See you there! [1] https://www.linkedin.com/feed/update/urn:li:activity:6815171728424087552/ [2] https://rh018.it/ -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/> *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

3 years, 4 months

1
0
0 / 0

Inquiries regarding missing data in the calendar table created/inserted into the ovirt_engine_history DB.

by whoisjmh＠gmail.com

I recently discovered that the spark-line chart is not displayed in the dashboard of the ovirt admin page. As a result of looking up the code and query, the data of the calendar table in the ovirt_engine_history DB of ovirt-dwh was only available until 2021-01-01 00:00:00, so a query statement ( https://github.com/oVirt/ovirt-engine/blob/master/frontend/webadmin/modul.... RIGHT OUTER JOIN of properties) was not getting the correct data. First, the existing "generate_series('2011-01-01 00:00'::timestamp, '2021-01-01 00:00', '1 hours')" part was temporarily modified and applied until 2051. , it was confirmed that the spark-line chart was displayed normally. For this, is there a way I can directly edit the file (https://github.com/oVirt/ovirt-dwh/blob/master/packaging/dbscripts/upgrad...) to commit or request a correction? I would like to know.

3 years, 4 months

2
1
0 / 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Users June 2021