March 2022 - Users - oVirt List Archives

querying which LUNs are associated to a specific VM disks
by Sandro Bonazzola 18 Mar '22

18 Mar '22

I got a question on oVirt Itala Telegram group about how to get which LUNs are used by the disks attached to a specific VMs. This information doesn't seem to be exposed in API or within the engine DB. Has anybody ever tried something like this? Thanks, -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/> *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

3 2

Reported Devices - Shows all interfaces
by Jean-Louis Dupond 18 Mar '22

18 Mar '22

Hi, To find out which guest nic is mapped to which ovirt nic you can do the following API call: /ovirt-engine/api/vms/4c1d50b2-4eee-46d6-a1b1-e4d9e21edaa6/nics/76ff8008-ae2e-46da-aaf4-8cc589dd0c12/reporteddevices But I would expect the reporteddevices to only show the one from the specified NIC, but it's not the case as all of them are displayed. Is this a bug? Or was this done by design? Thanks Jean-Louis

1 0

OVIRT INSTALLATION IN SAS RAID
by muhammad.riyaz＠ajex.ae 18 Mar '22

18 Mar '22

I have a Dell PowerEdge 710 server with SAS RAID 1 PERC 6/i, I am trying to install ovirt 4.4 but I could not find the destination disk. in the destination disk page, it is only showing my USB bootable device only. probably this might be SAS RAID diver error, if so how can i load driver during the installation.

5 18

So - no updates nor mentions about CVE-2022-0847 (Dirty Pipe)?
by jasonmicron＠gmail.com 18 Mar '22

18 Mar '22

Sorry if I missed this, but oVirt Engine is impacted. I was hoping to see some sort of release or announcement about this. If there was one, apologies. RHV has mitigated this: https://access.redhat.com/errata/RHSA-2022:0841

2 2

can not add Storage Domain using offload iscsi
by lkopyt＠gmail.com 17 Mar '22

17 Mar '22

Hi, some facts: ovirt-node 4.3.10 (based on Centos 7) hosts are HP blades BL460C with network card supporting iscsi HBA (there are no iscsi nics visible on OS level, but i had to configure ip addresses manually since they were not inherited from BIOS ) # iscsiadm -m iface default tcp,<empty>,<empty>,<empty>,<empty> iser iser,<empty>,<empty>,<empty>,<empty> be2iscsi.c4:34:6b:b3:85:75.ipv4.0 be2iscsi,c4:34:6b:b3:85:75,172.40.2.21,<empty>,iqn.1990-07.com.emulex:ovirt1worker1 be2iscsi.c4:34:6b:b3:85:75.ipv6.0 be2iscsi,c4:34:6b:b3:85:75,<empty>,<empty>,iqn.1990-07.com.emulex:ovirt1worker1 be2iscsi.c4:34:6b:b3:85:71.ipv6.0 be2iscsi,c4:34:6b:b3:85:71,<empty>,<empty>,iqn.1990-07.com.emulex:ovirt1worker1 be2iscsi.c4:34:6b:b3:85:71.ipv4.0 be2iscsi,c4:34:6b:b3:85:71,172.40.1.21,<empty>,iqn.1990-07.com.emulex:ovirt1worker1 # iscsiadm -m session be2iscsi: [1] 172.40.2.1:3260,12 iqn.1992-04.com.emc:cx.ckm00143501947.a0 (non-flash) be2iscsi: [2] 172.40.2.2:3260,6 iqn.1992-04.com.emc:cx.ckm00143501947.b1 (non-flash) be2iscsi: [5] 172.40.1.1:3260,5 iqn.1992-04.com.emc:cx.ckm00143501947.a1 (non-flash) be2iscsi: [6] 172.40.1.2:3260,4 iqn.1992-04.com.emc:cx.ckm00143501947.b0 (non-flash) [root@worker1 ~]# multipath -l 3600601604a003a00ee4b8ec05aa5ec11 dm-47 DGC ,VRAID size=100G features='2 queue_if_no_path retain_attached_hw_handler' hwhandler='1 alua' wp=rw |-+- policy='service-time 0' prio=0 status=active | |- 3:0:2:1 sds 65:32 active undef running | `- 4:0:0:1 sdo 8:224 active undef running `-+- policy='service-time 0' prio=0 status=enabled |- 3:0:3:1 sdu 65:64 active undef running `- 4:0:1:1 sdq 65:0 active undef running ... target SAN storage is detected, and exposed LUNs are visible. I can even partition them, create filesystem and mount them in OS, all when doing manually step by step. when trying to add Storage Domain in iscsi the LUNs/targets are nicely visible in GUI, buf after choosing a LUN the domain becomes locked and finally enters detatched mode. can not attach the Datacenter. in engine.log similar entry for each host: 2022-03-16 22:27:40,736+01 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.ConnectStorageServerVDSCommand] (EE-ManagedThreadFactory-engine-Thread-1111) [e8778752-1bc1-4ba9-b9c0-ce651d35d824] START, ConnectStorageServerVDSCommand(HostName = worker1, StorageServerConnectionManagementVDSParameters:{hostId='d009f919-b817-4220-874e-edb0e072faa1', storagePoolId='00000000-0000-0000-0000-000000000000', storageType='ISCSI', connectionList='[StorageServerConnections:{id='4dd97e5d-c162-4997-8eda-3d8881c44e31', connection='172.40.1.2', iqn='iqn.1992-04.com.emc:cx.ckm00143501947.b0', vfsType='null', mountOptions='null', nfsVersion='null', nfsRetrans='null', nfsTimeo='null', iface='null', netIfaceName='null'}, StorageServerConnections:{id='6e52a5bb-0157-4cbe-baa3-cfc8001d35b2', connection='172.40.2.1', iqn='iqn.1992-04.com.emc:cx.ckm00143501947.a0', vfsType='null', mountOptions='null', nfsVersion='null', nfsRetrans='null', nfsTimeo='null', iface='null', netIfaceName='null'}, StorageServerConnecti ons:{id='87194270-bb0e-49d8-9700-17436f2a3e28', connection='172.40.1.1', iqn='iqn.1992-04.com.emc:cx.ckm00143501947.a1', vfsType='null', mountOptions='null', nfsVersion='null', nfsRetrans='null', nfsTimeo='null', iface='null', netIfaceName='null'}, StorageServerConnections:{id='ef8e2fbd-cbf6-45e9-8e83-f85a50001c2d', connection='172.40.2.2', iqn='iqn.1992-04.com.emc:cx.ckm00143501947.b1', vfsType='null', mountOptions='null', nfsVersion='null', nfsRetrans='null', nfsTimeo='null', iface='null', netIfaceName='null'}]', sendNetworkEventOnFailure='true'}), log id: 317c3ffd ... 2022-03-16 22:30:40,836+01 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.ConnectStorageServerVDSCommand] (EE-ManagedThreadFactory-engine-Thread-1111) [e8778752-1bc1-4ba9-b9c0-ce651d35d824] Command 'ConnectStorageServerVDSCommand(HostName = worker1, StorageServerConnectionManagementVDSParameters:{hostId='d009f919-b817-4220-874e-edb0e072faa1', storagePoolId='00000000-0000-0000-0000-000000000000', storageType='ISCSI', connectionList='[StorageServerConnections:{id='4dd97e5d-c162-4997-8eda-3d8881c44e31', connection='172.40.1.2', iqn='iqn.1992-04.com.emc:cx.ckm00143501947.b0', vfsType='null', mountOptions='null', nfsVersion='null', nfsRetrans='null', nfsTimeo='null', iface='null', netIfaceName='null'}, StorageServerConnections:{id='6e52a5bb-0157-4cbe-baa3-cfc8001d35b2', connection='172.40.2.1', iqn='iqn.1992-04.com.emc:cx.ckm00143501947.a0', vfsType='null', mountOptions='null', nfsVersion='null', nfsRetrans='null', nfsTimeo='null', iface='null', netIfaceName='null'}, StorageServerConnec tions:{id='87194270-bb0e-49d8-9700-17436f2a3e28', connection='172.40.1.1', iqn='iqn.1992-04.com.emc:cx.ckm00143501947.a1', vfsType='null', mountOptions='null', nfsVersion='null', nfsRetrans='null', nfsTimeo='null', iface='null', netIfaceName='null'}, StorageServerConnections:{id='ef8e2fbd-cbf6-45e9-8e83-f85a50001c2d', connection='172.40.2.2', iqn='iqn.1992-04.com.emc:cx.ckm00143501947.b1', vfsType='null', mountOptions='null', nfsVersion='null', nfsRetrans='null', nfsTimeo='null', iface='null', netIfaceName='null'}]', sendNetworkEventOnFailure='true'})' execution failed: VDSGenericException: VDSNetworkException: Message timeout which can be caused by communication issues how to make it working? I read offload iscsi is supported but all the documentation i found is for software iscsi. any hints welcomed thanks

2 1

Welcome to oVirt 4.5.0 Alpha test day!
by Sandro Bonazzola 17 Mar '22

17 Mar '22

Hi, 4.5.0 Alpha was released yesterday! As for oVirt 4.4 test day we have a trello board at https://trello.com/b/3FZ7gdhM/ovirt-450-test-day . If you have troubles accessing the trello board please let me know. A release management draft page has been created at: https://www.ovirt.org/release/4.5.0/ If you're willing to help testing the release during the test days please join the oVirt development mailing list at https://lists.ovirt.org/archives/list/devel@ovirt.org/ and report your feedback there. Please join the trello board for sharing what you're going to test so others can focus on different areas not covered by your test. If you don't want to register to trello, please share on the oVirt development mailing list and we'll add it to the board. The board is publicly visible also to non-registered users. Instructions for installing oVirt 4.5.0 Alpha and oVirt 4.5.0 Beta for testing have been added to the release page https://www.ovirt.org/release/4.5.0/ and to relevant documentation sections on the oVirt website. Professional Services, Integrators and Backup vendors: please run a test session against your additional services, integrated solutions, downstream rebuilds, backup solution accordingly. If you're not listed here: https://ovirt.org/community/user-stories/users-and-providers.html consider adding your company there. If you're willing to help updating the localization for oVirt 4.5.0 please follow https://ovirt.org/develop/localization.html If you're willing to help promoting the oVirt 4.5.0 release you can submit your banner proposals for the oVirt home page and for the social media advertising at https://github.com/oVirt/ovirt-site/issues As an alternative please consider submitting a case study as in https://ovirt.org/community/user-stories/user-stories.html Feature owners: please start recording a presentation of your feature for oVirt Youtube channel: https://www.youtube.com/c/ovirtproject If you have some new feature requiring community feedback / testing please add your case under the "Test looking for volunteer" section. Do you want to contribute to getting ready for this release? Read more about oVirt community at https://ovirt.org/community/ and join the oVirt developers https://ovirt.org/develop/ -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/> *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours.*

1 1

Moving from oVirt 4.4.4 to 4.4.10
by ayoub souihel 17 Mar '22

17 Mar '22

Dears , I hope you are doing well . I have a cluster of 02 nodes and one standalone Manager , all of them are running on top of CentOS 8.3 witch already EOL , i would upgrade to the latest version witch is based on CentOS stream , but i am really confused about the best way to do it , basically i draft tis action plan , please advice me : - Redeploy a new engine with CentOS Stream . - Restore the ovirt backup on this new engine . - Redeploy one host with 4.4.10 . - Add the node to the cluster . - Move the VMs to the new hosts . - upgrade the second node . thank you in advance . Regards,

2 1

oVirt Nodes 'Setting Host state to Non-Operational' - looking for the cause.
by simon＠justconnect.ie 17 Mar '22

17 Mar '22

2 days ago I found that 2 of the 3 oVirt nodes had been set to 'Non-Operational'. GlusterFS seemed to be ok from the commandline, but the oVirt engine WebUI was reporting 2 out of 3 bricks per volume as down and event logs were filling up with the following types of messages. **************************************************** Failed to connect Host ddmovirtprod03 to the Storage Domains data03. The error message for connection ddmovirtprod03-strg:/data03 returned by VDSM was: Problem while trying to mount target Failed to connect Host ddmovirtprod03 to Storage Serverthe s Host ddmovirtprod03 cannot access the Storage Domain(s) data03 attached to the Data Center DDM_Production_DC. Setting Host state to Non-Operational. Failed to connect Host ddmovirtprod03 to Storage Pool Host ddmovirtprod01 reports about one of the Active Storage Domains as Problematic. Host ddmovirtprod01 cannot access the Storage Domain(s) data03 attached to the Data Center DDM_Production_DC. Setting Host state to Non-Operational. Failed to connect Host ddmovirtprod01 to Storage Pool DDM_Production_DC **************************************************** The following is from the vdsm.log on host01: **************************************************** [root@ddmovirtprod01 vdsm]# tail -f /var/log/vdsm/vdsm.log | grep "WARN" 2022-03-15 11:37:14,299+0000 WARN (ioprocess/232748) [IOProcess] (6bf1ef03-77e1-423b-850e-9bb6030b590d) Failed to create a probe file: '/rhev/data-center/mnt/glusterSD/ddmovirtprod03-strg:data03/.prob-6c101766-4e5d-40c6-8fa8-0f7e3b3e931e', error: 'Stale file handle' (init:461) 2022-03-15 11:37:24,313+0000 WARN (ioprocess/232748) [IOProcess] (6bf1ef03-77e1-423b-850e-9bb6030b590d) Failed to create a probe file: '/rhev/data-center/mnt/glusterSD/ddmovirtprod03-strg:_data03/.prob-c3fa017b-94dc-47d1-89a4-8ee046509a32', error: 'Stale file handle' (init:461) 2022-03-15 11:37:34,325+0000 WARN (ioprocess/232748) [IOProcess] (6bf1ef03-77e1-423b-850e-9bb6030b590d) Failed to create a probe file: '/rhev/data-center/mnt/glusterSD/ddmovirtprod03-strg:_data03/.prob-e173ecac-4d4d-4b59-a437-61eb5d0beb83', error: 'Stale file handle' (init:461) 2022-03-15 11:37:44,337+0000 WARN (ioprocess/232748) [IOProcess] (6bf1ef03-77e1-423b-850e-9bb6030b590d) Failed to create a probe file: '/rhev/data-center/mnt/glusterSD/ddmovirtprod03-strg:_data03/.prob-baf13698-0f43-4672-90a4-86cecdf9f8d0', error: 'Stale file handle' (init:461) 2022-03-15 11:37:54,350+0000 WARN (ioprocess/232748) [IOProcess] (6bf1ef03-77e1-423b-850e-9bb6030b590d) Failed to create a probe file: '/rhev/data-center/mnt/glusterSD/ddmovirtprod03-strg:_data03/.prob-1e92fdfd-d8e9-48b4-84a9-a2b84fc0d14c', error: 'Stale file handle' (init_:461) **************************************************** After trying different methods to resolve without success I did the following. 1. Moved any VM disks using Storage Domain data03 onto other Storage Domains. 2. Placed data03 Storage Domain ionto Maintenance mode. 3. Placed host03 into Maintenance mode, stopping Gluster services and rebooting. 4. Ensuring all Bricks were up, the peers connected and healing started. 5. Once Gluster volumes were healed I activated host03, at which point host01 also activated. 6. Host01 was showing as disconnected on most bricks so I rebooted it which resolved this. 7. I activated Storage Domain data03 without issue. The system has been left for 24hrs with no further issues. The issue is now resolved but it would be helful to know what happened to cause the issues with the Storage Domain data03 and where do I look to confirm. Regards Simon...

2 3

ovirt-node-ng state "Bond status: NONE"
by Renaud RAKOTOMALALA 17 Mar '22

17 Mar '22

Hello, I am trying to add a new ovirt-node-ng 4.4.10 node to my cluster managed by an ovirt-engine version 4.4.10. My cluster is composed of other ovirt-node-ng which have been successively updated from version 4.4.4 to version 4.4.10 without any problem. This new node is integrated normally in the cluster, however when I look at the status of the network part in the tab "Network interface" I see that all interfaces are "down". I have a paperclip at the "bond0" interface that says: "Bond state; NONE" I compared the content of "/etc/sysconfig/network-script" between an hypervisor which works and the one which has the problem and I notice that a whole bunch of files are missing and in particular the "ifup/ifdown...." files. The folder contains only the cluster specific files + the "ovirtmgmt" interface. The hypervisor which has the problem seems to be perfectly functional, ovirt-engine does not raise any problem. Have you already encountered this type of problem? Cheers, Renaud

3 3

setup Ovirt-node without internet connection
by david 17 Mar '22

17 Mar '22

Hi unable add Ovirt-node to the cluster without internet connection the node is a pre-build ISO image ovirt-node-ng-installer-4.4.10-2022030308.el8.iso the node hasn't internet connection the error message displayed:: "Host test-node2 installation failed. Task Ensure Python3 is installed for CentOS/RHEL8 hosts failed to execute. Please check logs for more details: /var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20220315080157-test-node2.imp.int-b8648e98-c2eb-481c-8155-38319cb041f7.log"

2 1

how to move from hosted-engine to standalone engine
by Pascal D 17 Mar '22

17 Mar '22

One issue I have with hosted-engine is that when something goes wrong it has a domino effect because hosted-engine cannot communicate with its database. I have been thinking to host ovirt engine separately on a different hypervisor and have all my host undeployed. However for efficiency my networks are separated by their functions. So my questions are as follow 1) is it a good idea to host the engine on a separate kvm 2) what network does this engine need to access. Obviously ovirtmgmt, and display to access it but what about storage. Does it need access to itor can it access it through ovirtmgmt and the SPM? 3) Is there a recipe or howto available to follow Thanks Pascal

2 1

Replace storage behind ovirt engine
by Demeter Tibor 16 Mar '22

16 Mar '22

Dear Users, I have to upgrade our hyperconverged ovirt system from 4.3 to 4.4, but meanwhile I would like to change the storage backend under the engine. At this moment it is a gluster based clustered fs, but I don't really like it.... I would like to change to a hardver based iscsi storage. I just wondering, when I do the engine reinstall, I will install it to an other storage. Is it possible somehow? Thanks in advance. Tibor

3 4

oVirt 4.5.0 Alpha is now available for testing
by Lev Veyde 16 Mar '22

16 Mar '22

The oVirt project is excited to announce the availability of oVirt 4.5.0 Alpha release for testing , as of March 16th, 2022. This release unleashes an altogether more powerful and flexible open source virtualization solution that encompasses hundreds of individual changes and a wide range of enhancements across the engine, storage, network, user interface, and analytics on top of oVirt 4.4. Important notes before you try it Please note this is an Alpha release. The oVirt Project makes no guarantees as to its suitability or usefulness. This pre-release must not be used in production, and it is not feature complete. In particular, please note that upgrades from 4.4 and future upgrades from this alpha to the final 4.5 release from this version are not supported. Some of the features included in oVirt 4.5.0 Alpha require content that will be available in RHEL 8.6 and derivatives which are currently included in CentOS Stream 8. Documentation Be sure to follow instructions for oVirt 4.5! - If you want to try oVirt as quickly as possible, follow the instructions on the Download <https://ovirt.org/download/> page. - For complete installation, administration, and usage instructions, see the oVirt Documentation <https://ovirt.org/documentation/>. - For upgrading from a previous version, see the oVirt Upgrade Guide <https://ovirt.org/documentation/upgrade_guide/>. - For a general overview of oVirt, see About oVirt <https://ovirt.org/community/about.html>. What’s new in oVirt 4.5.0 Alpha Release? This update is the ninth in a series of stabilization updates to the 4.4 series. This release is available now on x86_64 architecture for: - CentOS Stream 8 This release supports Hypervisor Hosts on x86_64: - oVirt Node NG (based on CentOS Stream 8) - CentOS Stream 8 Builds are also available for ppc64le and aarch64. Experimental builds for CentOS Stream 9 are also provided for Hypervisor Hosts. Some of the RFEs with high user impact are listed below: - 1926625 [RFE] How to enable HTTP Strict Transport Security (HSTS) on Apache HTTPD for Red Hat Virtualization Manager - 1933555 [RFE] Release python-ovirt-engine-sdk4 package on RHEL 9 - 1740427 [RFE] Provide SCSI reservation support for virtio-scsi via rhev-guest-tools for Windows 2016 and Windows 2019 guests using Direct-Lun as disks - 1849169 [RFE] add virtualCPUs/physicalCPUs ratio property to evenly_distributed policy - 1782056 [RFE] Integration of built-in ipsec feature in RHV/RHHI-V with OVN - 1624015 [RFE] Expose Console Options and Console invocation via API - 1998255 [RFE] [UI] Add search box for vNIC Profiles in RHVM WebUI on the main vNIC profiles tab - 1927985 [RFE] Speed up export-to-OVA on NFS by aligning loopback device offset - 2058177 [RFE] Include the package nvme-cli on virtualization hosts - 2021217 [RFE] Windows 2022 support - 1986775 [RFE] introduce support for CentOS Stream 9 on oVirt releases - 1990462 [RFE] Add user name and password to ELK integration - 1998866 [RFE] Windows 11 support - 1838089 [RFE] Please allow placing domain in maintenance mode with suspended VM - 1975720 [RFE] Huge VMs require an additional migration parameter - 1997893 [RFE] Prefer UEFI for new VMs - 1913389 [CBT] [RFE] Minimize scratch disk initial size - 1964241 [RFE][CBT][Veeam]Allow providing the created backup ID when starting a VM backup Some of the Bugs with high user impact are listed below: - 1986732 ovirt-ha services cannot set the LocalMaintenance mode in the storage metadata and are in a restart loop - 2035051 removing nfs-utils cause ovirt-engine removal due to cinderlib dep tree - 2054745 Setting SD to maintenance fails and turns the SD to inactive mode as a result - 1878724 vdsm-tool configure is failing with error “dependency job for libvirtd.service failed” - 2024698 build failure in copr - 2040402unable to use --log-size=0 option - 2024161 Penalizing score by 1000 due to cpu load is not canceled after load decreasing to 0 - 1986731 ovirt-engine uses deprecated API platform.linux_distribution which has been removed in Python 3.7 and later. - 1986728 ovirt-log-collector uses deprecated API platform.linux_distribution which has been removed in Python 3.7 and later. - 2019869 Local disk is not bootable when the VM is imported from OVA - 1986485 otopi uses deprecated API platform.linux_distribution which has been removed in Python 3.7 and later. - 2022541 unable to select iscsi luns - 1787192 Host fails to activate in RHV and goes to non-operational status when some of the iSCSI targets are down - 2006721 uploading image using ovirt_disk always fails for the first time and works in second attempt - 2020497 Need to include lvm2-2.03.14-1.el8 - 1899821 RHVH 4.4.3 anaconda UI proceeds to begin installation without root password provided - 2025936 metrics configuration playbooks failing due to rhel-system-role last refactor oVirt Node has been updated, including: - oVirt 4.5.0 alpha: https://www.ovirt.org/release/4.5.0/ - GlusterFS 10.1: https://docs.gluster.org/en/main/release-notes/10.1/ - RDO OpenStack Yoga pre-release: https://releases.openstack.org/yoga/index.html - OVS 2.15 - CentOS Stream 8 latest updates - Full list of changes compared to oVirt Node 4.4.10.2: Ovirt-node-ng-image-4.4.10.2 ovirt-node-ng-image-4.5.0_alpha NetworkManager 1.36.0-1.el8 1.36.0-2.el8 NetworkManager-config-server 1.36.0-1.el8 1.36.0-2.el8 NetworkManager-libnm 1.36.0-1.el8 1.36.0-2.el8 NetworkManager-ovs 1.36.0-1.el8 1.36.0-2.el8 NetworkManager-team 1.36.0-1.el8 1.36.0-2.el8 NetworkManager-tui 1.36.0-1.el8 1.36.0-2.el8 abrt 2.10.9-21.el8 abrt-addon-ccpp 2.10.9-21.el8 abrt-addon-coredump-helper 2.10.9-21.el8 abrt-addon-kerneloops 2.10.9-21.el8 abrt-addon-pstoreoops 2.10.9-21.el8 abrt-addon-vmcore 2.10.9-21.el8 abrt-addon-xorg 2.10.9-21.el8 abrt-cli 2.10.9-21.el8 abrt-dbus 2.10.9-21.el8 abrt-libs 2.10.9-21.el8 abrt-tui 2.10.9-21.el8 authselect-compat 1.2.2-3.el8 centos-release-advanced-virtualization 1.0-4.el8 centos-release-ceph-pacific 1.0-2.el8 centos-release-messaging 1-3.el8 centos-release-nfv-common 1-3.el8 centos-release-nfv-openvswitch 1-3.el8 centos-release-openstack-xena 1-1.el8 centos-release-opstools 1-12.el8 centos-release-ovirt45 8.6-1.el8 centos-release-rabbitmq-38 1-3.el8 centos-release-storage-common 2-2.el8 centos-release-virt-common 1-2.el8 cockpit 264-1.el8 264.1-1.el8 cockpit-bridge 264-1.el8 264.1-1.el8 cockpit-storaged 264-1.el8 264.1-1.el8 cockpit-system 264-1.el8 264.1-1.el8 cockpit-ws 264-1.el8 264.1-1.el8 device-mapper 1.02.177-10.el8 1.02.181-3.el8 device-mapper-event 1.02.177-10.el8 1.02.181-3.el8 device-mapper-event-libs 1.02.177-10.el8 1.02.181-3.el8 device-mapper-libs 1.02.177-10.el8 1.02.181-3.el8 e2fsprogs 1.45.6-3.el8 1.45.6-4.el8 e2fsprogs-libs 1.45.6-3.el8 1.45.6-4.el8 edk2-ovmf 20220126gitbb1bba3d77-1.el8.test 20220126gitbb1bba3d77-2.el8 elfutils 0.186-1.el8 fence-agents-all 4.2.1-88.el8 4.2.1-89.el8 fence-agents-amt-ws 4.2.1-88.el8 4.2.1-89.el8 fence-agents-apc 4.2.1-88.el8 4.2.1-89.el8 fence-agents-apc-snmp 4.2.1-88.el8 4.2.1-89.el8 fence-agents-bladecenter 4.2.1-88.el8 4.2.1-89.el8 fence-agents-brocade 4.2.1-88.el8 4.2.1-89.el8 fence-agents-cisco-mds 4.2.1-88.el8 4.2.1-89.el8 fence-agents-cisco-ucs 4.2.1-88.el8 4.2.1-89.el8 fence-agents-common 4.2.1-88.el8 4.2.1-89.el8 fence-agents-compute 4.2.1-88.el8 4.2.1-89.el8 fence-agents-drac5 4.2.1-88.el8 4.2.1-89.el8 fence-agents-eaton-snmp 4.2.1-88.el8 4.2.1-89.el8 fence-agents-emerson 4.2.1-88.el8 4.2.1-89.el8 fence-agents-eps 4.2.1-88.el8 4.2.1-89.el8 fence-agents-heuristics-ping 4.2.1-88.el8 4.2.1-89.el8 fence-agents-hpblade 4.2.1-88.el8 4.2.1-89.el8 fence-agents-ibmblade 4.2.1-88.el8 4.2.1-89.el8 fence-agents-ifmib 4.2.1-88.el8 4.2.1-89.el8 fence-agents-ilo-moonshot 4.2.1-88.el8 4.2.1-89.el8 fence-agents-ilo-mp 4.2.1-88.el8 4.2.1-89.el8 fence-agents-ilo-ssh 4.2.1-88.el8 4.2.1-89.el8 fence-agents-ilo2 4.2.1-88.el8 4.2.1-89.el8 fence-agents-intelmodular 4.2.1-88.el8 4.2.1-89.el8 fence-agents-ipdu 4.2.1-88.el8 4.2.1-89.el8 fence-agents-ipmilan 4.2.1-88.el8 4.2.1-89.el8 fence-agents-kdump 4.2.1-88.el8 4.2.1-89.el8 fence-agents-mpath 4.2.1-88.el8 4.2.1-89.el8 fence-agents-redfish 4.2.1-88.el8 4.2.1-89.el8 fence-agents-rhevm 4.2.1-88.el8 4.2.1-89.el8 fence-agents-rsa 4.2.1-88.el8 4.2.1-89.el8 fence-agents-rsb 4.2.1-88.el8 4.2.1-89.el8 fence-agents-sbd 4.2.1-88.el8 4.2.1-89.el8 fence-agents-scsi 4.2.1-88.el8 4.2.1-89.el8 fence-agents-vmware-rest 4.2.1-88.el8 4.2.1-89.el8 fence-agents-vmware-soap 4.2.1-88.el8 4.2.1-89.el8 fence-agents-wti 4.2.1-88.el8 4.2.1-89.el8 gc 7.6.4-3.el8 gdb-headless 8.2-18.el8 glusterfs 8.6-2.el8s 10.1-1.el8s glusterfs-cli 8.6-2.el8s 10.1-1.el8s glusterfs-client-xlators 8.6-2.el8s 10.1-1.el8s glusterfs-events 8.6-2.el8s 10.1-1.el8s glusterfs-fuse 8.6-2.el8s 10.1-1.el8s glusterfs-geo-replication 8.6-2.el8s 10.1-1.el8s glusterfs-server 8.6-2.el8s 10.1-1.el8s guile 2.0.14-7.el8 imgbased 1.2.23-1.el8 1.2.24-1.el8 ldns 1.7.0-21.el8 libatomic_ops 7.6.2-3.el8 libcom_err 1.45.6-3.el8 1.45.6-4.el8 libgfapi0 8.6-2.el8s 10.1-1.el8s libgfchangelog0 8.6-2.el8s 10.1-1.el8s libgfrpc0 8.6-2.el8s 10.1-1.el8s libgfxdr0 8.6-2.el8s 10.1-1.el8s libglusterd0 8.6-2.el8s 10.1-1.el8s libglusterfs0 8.6-2.el8s 10.1-1.el8s libipt 1.6.1-8.el8 librdkafka 0.11.4-3.el8 1.5.0-1.el8 libreport 2.9.5-15.el8 libreport-cli 2.9.5-15.el8 libreport-plugin-rhtsupport 2.9.5-15.el8 libreport-plugin-ureport 2.9.5-15.el8 libreport-rhel 2.9.5-15.el8 libreport-web 2.9.5-15.el8 libreswan 4.5-1.el8 libss 1.45.6-3.el8 1.45.6-4.el8 libtar 1.2.20-15.el8 liburing 1.0.7-3.el8 lvm2 2.03.12-10.el8 2.03.14-3.el8 lvm2-libs 2.03.12-10.el8 2.03.14-3.el8 lz4 1.8.3-3.el8_4 mom 0.6.1-1.el8 0.6.2-1.el8 nvme-cli 1.16-3.el8 openvswitch2.11 2.11.3-90.el8s openvswitch2.15 2.15.0-81.el8s openvswitch2.15-ipsec 2.15.0-81.el8s otopi-common 1.9.6-1.el8 1.10.0-1.el8 ovirt-ansible-collection 1.6.6-1.el8 2.0.0-0.6.BETA.el8 ovirt-host 4.4.9-2.el8 4.5.0-1.el8 ovirt-host-dependencies 4.4.9-2.el8 4.5.0-1.el8 ovirt-hosted-engine-ha 2.4.10-1.el8 2.5.0-1.el8 ovirt-hosted-engine-setup 2.5.4-2.el8 2.6.1-1.el8 ovirt-imageio-client 2.3.0-1.el8 2.4.1-1.el8 ovirt-imageio-common 2.3.0-1.el8 2.4.1-1.el8 ovirt-imageio-daemon 2.3.0-1.el8 2.4.1-1.el8 ovirt-node-ng-image-update-placeholder 4.4.10.2-1.el8 4.5.0-2.el8 ovirt-node-ng-nodectl 4.4.0-1.el8 4.4.1-1.el8 ovirt-openvswitch 2.11-1.el8 2.15-3.el8 ovirt-openvswitch-ipsec 2.15-3.el8 ovirt-openvswitch-ovn 2.11-1.el8 2.15-3.el8 ovirt-openvswitch-ovn-common 2.11-1.el8 2.15-3.el8 ovirt-openvswitch-ovn-host 2.11-1.el8 2.15-3.el8 ovirt-provider-ovn-driver 1.2.34-1.el8 1.2.36-1.el8 ovirt-python-openvswitch 2.11-1.el8 2.15-3.el8 ovirt-release-host-node 4.4.10.2-1.el8 4.5.0-2.el8 ovirt-release44 4.4.10.2-1.el8 ovn-2021 21.06.0-29.el8s ovn-2021-host 21.06.0-29.el8s ovn2.11 2.11.1-57.el8s ovn2.11-host 2.11.1-57.el8s platform-python-setuptools 39.2.0-6.el8 python-oslo-concurrency-lang 4.3.1-1.el8 4.4.1-1.el8 python-oslo-i18n-lang 5.0.1-2.el8 5.1.0-1.el8 python-oslo-log-lang 4.4.0-2.el8 4.6.0-1.el8 python-oslo-privsep-lang 2.4.0-2.el8 2.6.2-1.el8 python-oslo-utils-lang 4.6.1-1.el8 4.10.1-2.el8 python3-abrt 2.10.9-21.el8 python3-abrt-addon 2.10.9-21.el8 python3-attrs 17.4.0-6.el8 python3-cffi 1.11.5-5.el8 1.13.2-1.el8 python3-cloud-what 1.28.25-1.el8 python3-daemon 2.2.3-7.el8 2.2.4-3.el8 python3-debtcollector 1.22.0-2.el8 2.3.0-2.el8 python3-decorator 4.2.1-2.el8 4.4.0-5.el8 python3-distro 1.4.0-2.module_el8.5.0+761+faacb0fb 1.4.0-4.el8 python3-eventlet 0.25.2-3.1.el8 0.33.0-2.el8 python3-funcsigs 1.0.2-17.el8 python3-gluster 8.6-2.el8s 10.1-1.el8s python3-imgbased 1.2.23-1.el8 1.2.24-1.el8 python3-iniparse 0.4-31.el8 python3-jsonschema 2.6.0-4.el8 3.2.0-5.el8 python3-libreport 2.9.5-15.el8 python3-lockfile 0.11.0-16.el8 0.12.2-1.el8 python3-monotonic 1.5-5.el8 python3-msgpack 1.0.0-2.el8 1.0.3-2.el8 python3-openvswitch2.11 2.11.3-90.el8s python3-openvswitch2.15 2.15.0-81.el8s python3-os-brick 4.0.4-1.el8 5.0.1-1.el8 python3-os-win 5.2.0-1.el8 5.5.0-1.el8 python3-oslo-concurrency 4.3.1-1.el8 4.4.1-1.el8 python3-oslo-config 8.3.4-1.el8 8.7.1-1.el8 python3-oslo-context 3.1.2-1.el8 3.3.2-1.el8 python3-oslo-i18n 5.0.1-2.el8 5.1.0-1.el8 python3-oslo-log 4.4.0-2.el8 4.6.0-1.el8 python3-oslo-privsep 2.4.0-2.el8 2.6.2-1.el8 python3-oslo-serialization 4.0.1-2.el8 4.2.0-1.el8 python3-oslo-service 2.4.1-1.el8 2.6.1-1.el8 python3-oslo-utils 4.6.1-1.el8 4.10.1-2.el8 python3-otopi 1.9.6-1.el8 1.10.0-1.el8 python3-ovirt-engine-sdk4 4.4.15-1.el8 4.5.0-1.el8 python3-ovirt-node-ng-nodectl 4.4.0-1.el8 4.4.1-1.el8 python3-ovirt-setup-lib 1.3.2-1.el8 1.3.3-1.el8 python3-passlib 1.7.1-6.el8 1.7.4-1.el8 python3-paste 3.2.4-1.el8 3.5.0-1.el8 python3-paste-deploy 2.1.0-3.el8 2.1.1-1.el8 python3-pbr 5.4.3-2.el8 5.5.1-1.el8 python3-pyasn1 0.4.6-3.el8 0.4.6-3.el8s python3-pyasn1-modules 0.4.6-3.el8 0.4.6-3.el8s python3-pyrsistent 0.17.3-1.el8 python3-pyxattr 0.5.3-19.1.el8 0.5.3-18.el8 python3-pyyaml 5.1.2-3.el8 5.4.1-2.el8 python3-repoze-lru 0.7-6.el8 0.7-6.el8s python3-requests 2.22.0-7.el8 2.25.1-1.el8 python3-routes 2.4.1-12.el8 2.4.1-12.el8s python3-setuptools 39.2.0-6.el8 50.3.2-1.el8s python3-stevedore 3.2.2-2.el8 3.4.0-1.el8 python3-subscription-manager-rhsm 1.28.25-1.el8 python3-suds 0.7-0.8.94664ddd46a6.el8 0.7-0.11.94664ddd46a6.el8 python3-tempita 0.5.1-25.el8 0.5.1-25.el8s python3-urllib3 1.24.2-5.el8 1.25.10-4.el8 python3-webob 1.8.6-3.el8 1.8.6-3.el8s python3-wrapt 1.11.2-4.el8 1.13.3-2.el8 python3-yappi 1.2.5-1.el8 1.3.0-1.el8 python3-zipp 0.5.1-3.el8 3.4.0-1.el8 satyr 0.26-2.el8 subscription-manager-rhsm-certificates 1.28.25-1.el8 vdsm 4.40.100.2-1.el8 4.50.0.10-1.el8 vdsm-api 4.40.100.2-1.el8 4.50.0.10-1.el8 vdsm-client 4.40.100.2-1.el8 4.50.0.10-1.el8 vdsm-common 4.40.100.2-1.el8 4.50.0.10-1.el8 vdsm-gluster 4.40.100.2-1.el8 4.50.0.10-1.el8 vdsm-http 4.40.100.2-1.el8 4.50.0.10-1.el8 vdsm-jsonrpc 4.40.100.2-1.el8 4.50.0.10-1.el8 vdsm-network 4.40.100.2-1.el8 4.50.0.10-1.el8 vdsm-python 4.40.100.2-1.el8 4.50.0.10-1.el8 vdsm-yajsonrpc 4.40.100.2-1.el8 4.50.0.10-1.el8 oVirt Appliance has been updated, including: - oVirt 4.5.0 alpha: https://www.ovirt.org/release/4.5.0/ - GlusterFS 10.1: https://docs.gluster.org/en/main/release-notes/10.1/ - RDO OpenStack Yoga pre-release: https://releases.openstack.org/yoga/index.html - OVS 2.15 - CentOS Stream 8 latest updates - Full list of changes compared to oVirt Appliance 4.4.10: 4.4.10.3 4.5.0_alpha apache-commons-codec 1.11-3.module_el8.5.0+922+9f7ad99e 1.15-4.2.el8s apache-commons-collections 3.2.2-10.module_el8.4.0+595+e59c9af2 3.2.2-24.2.el8s apache-commons-compress 1.18-1.module_el8.0.0+30+832da3a1 1.21-1.2.el8s apache-commons-io 2.6-3.module_el8.6.0+1030+8d97e896 2.8.0-5.2.el8s apache-commons-jxpath 1.3-29.module_el8.5.0+922+9f7ad99e 1.3-40.2.el8s apache-commons-lang3 3.12.0-3.2.el8s apache-commons-logging 1.2-13.module_el8.6.0+1030+8d97e896 1.2-27.2.el8s apache-sshd 2.6.0-2.el8 2.8.0-0.1.el8 authselect-compat 1.2.2-3.el8 bea-stax-api 1.2.0-16.module_el8.4.0+595+e59c9af2 blosc 1.17.0-1.el8 1.20.1-1.el8 centos-release-advanced-virtualization 1.0-4.el8 centos-release-ceph-pacific 1.0-2.el8 centos-release-messaging 1-3.el8 centos-release-nfv-common 1-3.el8 centos-release-nfv-openvswitch 1-3.el8 centos-release-openstack-xena 1-1.el8 centos-release-opstools 1-12.el8 centos-release-ovirt45 8.6-1.el8s centos-release-rabbitmq-38 1-3.el8 centos-release-storage-common 2-2.el8 centos-release-virt-common 1-2.el8 fapolicyd 1.1-1.el8 fapolicyd-selinux 1.1-1.el8 glassfish-fastinfoset 1.2.13-9.module_el8.4.0+595+e59c9af2 glassfish-jaxb-api 2.2.12-8.module_el8.4.0+595+e59c9af2 glassfish-jaxb-core 2.2.11-11.module_el8.4.0+595+e59c9af2 glassfish-jaxb-runtime 2.2.11-11.module_el8.4.0+595+e59c9af2 glassfish-jaxb-txw2 2.2.11-11.module_el8.4.0+595+e59c9af2 httpcomponents-client 4.5.5-5.module_el8.6.0+1030+8d97e896 4.5.13-2.2.el8s httpcomponents-core 4.4.10-3.module_el8.5.0+922+9f7ad99e 4.4.13-4.2.el8s istack-commons-runtime 2.21-9.el8 jakarta-activation 1.2.2-4.el8s javapackages-filesystem 5.3.0-2.module_el8.0.0+30+832da3a1 6.0.0-1.4.el8s javapackages-tools 5.3.0-2.module_el8.0.0+30+832da3a1 6.0.0-1.4.el8s jaxb-api 2.3.3-5.el8 jaxb-impl 2.3.3-6.1.el8 jcl-over-slf4j 1.7.25-4.module_el8.6.0+1030+8d97e896 1.7.30-10.2.el8s libqhull 2015.2-5.el8 7.2.1-2.el8 librdkafka 0.11.4-3.el8 1.5.0-1.el8 novnc 1.1.0-6.el8 1.3.0-1.el8 nvme-cli 1.16-3.el8 nvmetcli 0.7-3.el8 openstack-java-cinder-client 3.2.9-9.el8 3.2.9-1.el8 openstack-java-cinder-model 3.2.9-9.el8 3.2.9-1.el8 openstack-java-client 3.2.9-9.el8 3.2.9-1.el8 openstack-java-glance-client 3.2.9-9.el8 3.2.9-1.el8 openstack-java-glance-model 3.2.9-9.el8 3.2.9-1.el8 openstack-java-keystone-client 3.2.9-9.el8 3.2.9-1.el8 openstack-java-keystone-model 3.2.9-9.el8 3.2.9-1.el8 openstack-java-quantum-client 3.2.9-9.el8 3.2.9-1.el8 openstack-java-quantum-model 3.2.9-9.el8 3.2.9-1.el8 openstack-java-resteasy-connector 3.2.9-9.el8 3.2.9-1.el8 openvswitch2.11 2.11.3-90.el8s openvswitch2.15 2.15.0-81.el8s otopi-common 1.9.6-1.el8 1.10.0-1.el8 ovirt-ansible-collection 1.6.6-1.el8 2.0.0-0.6.BETA.el8 ovirt-dependencies 4.4.2-1.el8 4.5.1-1.el8 ovirt-engine 4.4.10.7-1.el8 4.5.0-1.el8 ovirt-engine-backend 4.4.10.7-1.el8 4.5.0-1.el8 ovirt-engine-dbscripts 4.4.10.7-1.el8 4.5.0-1.el8 ovirt-engine-dwh 4.4.10-1.el8 4.5.0-1.el8 ovirt-engine-dwh-grafana-integration-setup 4.4.10-1.el8 4.5.0-1.el8 ovirt-engine-dwh-setup 4.4.10-1.el8 4.5.0-1.el8 ovirt-engine-restapi 4.4.10.7-1.el8 4.5.0-1.el8 ovirt-engine-setup 4.4.10.7-1.el8 4.5.0-1.el8 ovirt-engine-setup-base 4.4.10.7-1.el8 4.5.0-1.el8 ovirt-engine-setup-plugin-cinderlib 4.4.10.7-1.el8 4.5.0-1.el8 ovirt-engine-setup-plugin-imageio 4.4.10.7-1.el8 4.5.0-1.el8 ovirt-engine-setup-plugin-ovirt-engine 4.4.10.7-1.el8 4.5.0-1.el8 ovirt-engine-setup-plugin-ovirt-engine-common 4.4.10.7-1.el8 4.5.0-1.el8 ovirt-engine-setup-plugin-vmconsole-proxy-helper 4.4.10.7-1.el8 4.5.0-1.el8 ovirt-engine-setup-plugin-websocket-proxy 4.4.10.7-1.el8 4.5.0-1.el8 ovirt-engine-tools 4.4.10.7-1.el8 4.5.0-1.el8 ovirt-engine-tools-backup 4.4.10.7-1.el8 4.5.0-1.el8 ovirt-engine-ui-extensions 1.2.7-1.el8 1.3.1-1.el8 ovirt-engine-vmconsole-proxy-helper 4.4.10.7-1.el8 4.5.0-1.el8 ovirt-engine-webadmin-portal 4.4.10.7-1.el8 4.5.0-1.el8 ovirt-engine-websocket-proxy 4.4.10.7-1.el8 4.5.0-1.el8 ovirt-engine-wildfly 23.0.2-1.el8 24.0.1-1.el8 ovirt-engine-wildfly-overlay 23.0.2-1.el8 24.0.1-1.el8 ovirt-imageio-client 2.4.1-1.el8 ovirt-imageio-common 2.3.0-1.el8 2.4.1-1.el8 ovirt-imageio-daemon 2.3.0-1.el8 2.4.1-1.el8 ovirt-openvswitch 2.11-1.el8 2.15-3.el8 ovirt-openvswitch-ovn 2.11-1.el8 2.15-3.el8 ovirt-openvswitch-ovn-central 2.11-1.el8 2.15-3.el8 ovirt-openvswitch-ovn-common 2.11-1.el8 2.15-3.el8 ovirt-provider-ovn 1.2.34-1.el8 1.2.36-1.el8 ovirt-python-openvswitch 2.11-1.el8 2.15-3.el8 ovirt-release44 4.4.10.2-1.el8 ovirt-web-ui 1.7.2-1.el8 1.8.0-1.el8 ovn-2021 21.06.0-29.el8s ovn-2021-central 21.06.0-29.el8s ovn2.11 2.11.1-57.el8s ovn2.11-central 2.11.1-57.el8s platform-python-setuptools 39.2.0-6.el8 python-oslo-concurrency-lang 4.3.1-1.el8 4.4.1-1.el8 python-oslo-db-lang 8.4.1-1.el8 11.0.0-1.el8 python-oslo-i18n-lang 5.0.1-2.el8 5.1.0-1.el8 python-oslo-log-lang 4.4.0-2.el8 4.6.0-1.el8 python-oslo-middleware-lang 4.1.1-2.el8 4.4.0-1.el8 python-oslo-privsep-lang 2.4.0-2.el8 2.6.2-1.el8 python-oslo-utils-lang 4.6.1-1.el8 4.10.1-2.el8 python-oslo-versionedobjects-lang 2.3.0-2.el8 2.5.0-1.el8 python3-alembic 1.4.2-5.el8 1.7.1-3.el8 python3-amqp 2.6.1-1.el8 5.0.9-1.el8 python3-aniso8601 8.0.0-1.el8 8.1.0-1.el8 python3-ansible-runner 1.4.6-1.el8 1.4.6-3.el8 python3-attrs 17.4.0-6.el8 python3-automaton 2.2.0-1.el8 2.4.0-1.el8 python3-bcrypt 3.1.7-3.el8 3.1.7-3.el8s python3-beautifulsoup4 4.9.3-1.el8s python3-boto3 1.6.1-2.el8 python3-botocore 1.17.52-1.el8 python3-cachetools 4.1.1-2.el8 4.2.0-1.el8s python3-cairo 1.18.1-2.el8 1.16.3-6.el8 python3-cffi 1.11.5-5.el8 1.13.2-1.el8 python3-cinder-common 17.2.0-1.el8 19.0.0-2.el8 python3-cinderlib 3.0.0-1.el8 4.1.0-1.el8 python3-configshell 1.1.28-1.el8 python3-cssselect 0.9.2-13.el8 python3-daemon 2.2.3-7.el8 2.2.4-3.el8 python3-dataclasses 0.8-1.el8 python3-debtcollector 1.22.0-2.el8 2.3.0-2.el8 python3-decorator 4.2.1-2.el8 4.4.0-5.el8 python3-distro 1.4.0-2.module_el8.5.0+761+faacb0fb 1.4.0-4.el8 python3-editor 1.0.4-4.el8 python3-eventlet 0.25.2-3.1.el8 0.33.0-2.el8 python3-flask 0.12.2-4.el8 1.1.2-4.el8 python3-flask-restful 0.3.7-5.el8 0.3.9-2.el8 python3-funcsigs 1.0.2-17.el8 python3-futurist 2.3.0-2.el8 2.4.0-1.el8 python3-httplib2 0.10.3-4.el8 0.16.0-1.el8 python3-importlib-resources 4.1.1-1.el8 python3-jsonschema 2.6.0-4.el8 3.2.0-5.el8 python3-kombu 4.6.11-2.el8 5.0.2-1.el8 python3-lockfile 0.11.0-16.el8 0.12.2-1.el8 python3-mock 2.0.0-11.el8 3.0.5-7.el8 python3-monotonic 1.5-5.el8 python3-msgpack 1.0.0-2.el8 1.0.3-2.el8 python3-ntlm-auth 1.5.0-1.el8 python3-openvswitch2.11 2.11.3-90.el8s python3-openvswitch2.15 2.15.0-81.el8s python3-os-brick 4.0.4-1.el8 5.0.1-1.el8 python3-os-win 5.2.0-1.el8 5.5.0-1.el8 python3-oslo-concurrency 4.3.1-1.el8 4.4.1-1.el8 python3-oslo-config 8.3.4-1.el8 8.7.1-1.el8 python3-oslo-context 3.1.2-1.el8 3.3.2-1.el8 python3-oslo-db 8.4.1-1.el8 11.0.0-1.el8 python3-oslo-i18n 5.0.1-2.el8 5.1.0-1.el8 python3-oslo-log 4.4.0-2.el8 4.6.0-1.el8 python3-oslo-messaging 12.5.2-1.el8 12.9.2-1.el8 python3-oslo-metrics 0.3.1-1.el8 python3-oslo-middleware 4.1.1-2.el8 4.4.0-1.el8 python3-oslo-privsep 2.4.0-2.el8 2.6.2-1.el8 python3-oslo-rootwrap 6.2.0-2.el8 6.3.1-1.el8 python3-oslo-serialization 4.0.1-2.el8 4.2.0-1.el8 python3-oslo-service 2.4.1-1.el8 2.6.1-1.el8 python3-oslo-utils 4.6.1-1.el8 4.10.1-2.el8 python3-oslo-versionedobjects 2.3.0-2.el8 2.5.0-1.el8 python3-otopi 1.9.6-1.el8 1.10.0-1.el8 python3-ovirt-engine-lib 4.4.10.7-1.el8 4.5.0-1.el8 python3-ovirt-engine-sdk4 4.4.15-1.el8 4.5.0-1.el8 python3-ovirt-setup-lib 1.3.2-1.el8 1.3.3-1.el8 python3-ovsdbapp 0.17.5-1.el8 1.12.0-1.el8 python3-passlib 1.7.1-6.el8 1.7.4-1.el8 python3-paste 3.2.4-1.el8 3.5.0-1.el8 python3-paste-deploy 2.1.0-3.el8 2.1.1-1.el8 python3-pbr 5.4.3-2.el8 5.5.1-1.el8 python3-prometheus_client 0.7.1-2.el8 python3-psutil 5.7.2-1.el8 5.7.3-1.el8 python3-pyasn1 0.4.6-3.el8 0.4.6-3.el8s python3-pyasn1-modules 0.4.6-3.el8 0.4.6-3.el8s python3-pynacl 1.3.0-5.el8 1.4.0-1.el8 python3-pyrsistent 0.17.3-1.el8 python3-pyyaml 5.1.2-3.el8 5.4.1-2.el8 python3-qpid-proton 0.36.0-1.el8 0.35.0-3.el8s python3-redis 3.3.8-1.el8 3.5.3-1.el8 python3-repoze-lru 0.7-6.el8 0.7-6.el8s python3-requests 2.22.0-7.el8 2.25.1-1.el8 python3-requests_ntlm 1.1.0-8.el8 1.1.0-9.el8 python3-routes 2.4.1-12.el8 2.4.1-12.el8s python3-s3transfer 0.3.3-3.el8 python3-setuptools 39.2.0-6.el8 50.3.2-1.el8s python3-soupsieve 2.3.1-2.el8 python3-sqlalchemy 1.3.2-2.module_el8.5.0+761+faacb0fb 1.4.18-1.1.el8 python3-stevedore 3.2.2-2.el8 3.4.0-1.el8 python3-taskflow 4.5.0-2.el8 4.6.2-1.el8 python3-tempita 0.5.1-25.el8 0.5.1-25.el8s python3-tooz 2.7.2-1.el8 2.9.0-1.el8 python3-urllib3 1.24.2-5.el8 1.25.10-4.el8 python3-urwid 1.3.1-4.el8 python3-vine 1.3.0-4.el8 5.0.0-2.el8 python3-voluptuous 0.11.7-2.el8 0.12.1-1.el8 python3-wcwidth 0.1.7-14.el8 0.2.5-2.el8 python3-webob 1.8.6-3.el8 1.8.6-3.el8s python3-websocket-client 0.56.0-5.el8 0.57.0-1.el8s python3-websockify 0.8.0-15.el8 0.9.0-1.el8 python3-werkzeug 0.12.2-4.el8 2.0.1-2.el8 python3-winrm 0.3.0-7.el8 0.4.1-1.el8 python3-wrapt 1.11.2-4.el8 1.13.3-2.el8 python3-xmltodict 0.12.0-4.el8 0.12.0-6.el8 python3-yappi 1.2.5-1.el8 1.3.0-1.el8 python3-zipp 0.5.1-3.el8 3.4.0-1.el8 qpid-proton-c 0.36.0-1.el8 0.35.0-3.el8s relaxngDatatype 2011.1-7.module_el8.4.0+595+e59c9af2 rpm-plugin-fapolicyd 4.14.3-22.el8 slf4j 1.7.25-4.module_el8.6.0+1030+8d97e896 1.7.30-10.2.el8s slf4j-jdk14 1.7.25-4.module_el8.5.0+922+9f7ad99e 1.7.30-10.2.el8s stax-ex 1.7.7-8.module_el8.4.0+595+e59c9af2 target-restore 2.1.74-1.el8 targetcli 2.1.53-2.el8 vdsm-jsonrpc-java 1.6.0-1.el8 1.7.1-1.el8 xmlstreambuffer 1.5.4-8.module_el8.4.0+595+e59c9af2 xsom 0-19.20110809svn.module_el8.4.0+595+e59c9af2 zstd 1.4.4-1.el8 1.4.5-6.el8 See the release notes for installation instructions and a list of new features and bugs fixed. Additional resources: - Read more about the oVirt 4.5.0 release highlights: https://www.ovirt.org/release/4.5.0/ - Get more oVirt project updates on Twitter: https://twitter.com/ovirt - Check out the latest project news on the oVirt blog: https://blogs.ovirt.org/ oVirt 4.5.0 Alpha test day - March 17th 2022 If you're willing to help testing the release during the test days please join the oVirt development mailing list at https://lists.ovirt.org/archives/list/devel@ovirt.org/ and report your feedback there. Please join the trello board for sharing what you're going to test so others can focus on different areas not covered by your test. If you don't want to register to trello, please share on the oVirt development mailing list and we'll add it to the board. The board is publicly visible also to non-registered users. Instructions for installing oVirt 4.5.0 Alpha and oVirt 4.5.0 Beta for testing will be added to the release page https://www.ovirt.org/release/4.5.0/ when the corresponding version will be released. Professional Services, Integrators and Backup vendors: please plan a test session against your additional services, integrated solutions, downstream rebuilds, backup solution accordingly. If you're not listed here: https://ovirt.org/community/user-stories/users-and-providers.html consider adding your company there. If you're willing to help updating the localization for oVirt 4.5.0 please follow https://ovirt.org/develop/localization.html If you're willing to help promoting the oVirt 4.5.0 release you can submit your banner proposals for the oVirt home page and for the social media advertising at https://github.com/oVirt/ovirt-site/issues As an alternative please consider submitting a case study as in https://ovirt.org/community/user-stories/user-stories.html Feature owners: please start planning a presentation of your feature for oVirt Youtube channel: https://www.youtube.com/c/ovirtproject If you have some new feature requiring community feedback / testing please add your case under the "Test looking for volunteer" section. Do you want to contribute to getting ready for this release? Read more about oVirt community at https://ovirt.org/community/ and join the oVirt developers https://ovirt.org/develop/ -- Lev Veyde Senior Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

'check_rhv' plugin for Icinga/Nagios is not maintained anymore ?
by Abhishekh Patil 16 Mar '22

16 Mar '22

Hi, We have a customer who says 'check_rhv' is no longer maintained [A]. Do we have any other alternate plugin for Icinga/Nagios ? Thanks, [A] ==> https://github.com/rk-it-at/check_rhv -- Abhishekh patil senior technical support engineer, RHC{SA,E},CKA Red Hat India <https://www.redhat.com> Level-5, Tower X, Cybercity Magarpatta City, Pune 411013 abpatil(a)redhat.com <aakbar(a)redhat.com> M: +91-8446891297 <http://redhatemailsignature-marketing.itos.redhat.com/> IM: IRC : abpatil

1 0

Re: Import ova Thin provisioned disk conversion to pre allocated disks fails
by Simon Scott 16 Mar '22

16 Mar '22

Hi Arik, I don’t see an option to select ‘allocation-policy=clone and specifying that the VM disk(s) should be preallocated’ when creating a VM from the template. Regard Simon

3 2

Re: Console - VNC password is 12 characters long, only 8 permitted
by Francesco Lorenzini 15 Mar '22

15 Mar '22

Hi Chris (sorry for the previous mispel), I installed oVirt 4.4.8 on top on CentOS 8 (Stream and standard), never used Node ISO. Maybe enabling external repo? In a "test" server try to install the following rpm and then downgrade libvirt: http://resources.ovirt.org/pub/yum-repo/ovirt-release44.rpm Regards, Francesco Il 14/03/2022 18:31, Christopher Law ha scritto: > > Thanks Francesco, it looks like a fix has been put into oVirt 4.5 > which is scheduled for general release on the 12^th April. > > I’m using an oVirt Node ISO (4.4.10) install on the host are you doing > the same or did you install oVirt on top of a standard centos install > yourself? > > I did try a dnf downgrade libvirt but it said there were no previous > packages available. Just doing a re-install so will try your provided > commands in a moment. > > Cheers, > > Chris. > > *From:*Francesco Lorenzini <francesco(a)shellrent.com> > *Sent:* 14 March 2022 17:23 > *To:* Christopher Law <chris(a)chrislaw.me>; Milan Zamazal > <mzamazal(a)redhat.com> > *Cc:* francesco--- via Users <users(a)ovirt.org> > *Subject:* Re: [ovirt-users] Re: Console - VNC password is 12 > characters long, only 8 permitted > > Hi Crhis, > > I didn't resolve properly, I found that downgrading libvirt was the > fastest workaround. > > Just downgrade libvirt via yum/dnf to to version 7.10. I added the > downgrade in an Ansible task, if you are practical: > > - name: Ensure libvirt-7.10.0 is installed > yum: > name: libvirt-7.10.0 > state: present > update_cache: true > allow_downgrade: true > ignore_errors: true > > or via cli : > > yum install libvirt-7.10.0 > > > Post dowgrade we performed a restart of vdsm (or super-vdsm, or both, > I don't remember). The downgrade is quite safe, we didn't encounter > any problem with existing hosts and new deployed one. > > Francesco > > Il 14/03/2022 15:58, Christopher Law ha scritto: > > Hi - > > Did anyone get a solution to this. I just upgraded our physical ovirt-engine to 4.4.10 and added a freshly installed oVirt Node 4.4.10, and I'm getting this issue. > > Given libvirt8 is part of oVirt Node 4.4.10 base install I was hoping for a fix. Also seen a fix applied here:https://github.com/oVirt/ovirt-engine/commit/a1e7e39348550b575f1f01b70… but not sure if this has been released? > > What are my options, not quite sure how to downgrade libvirt in oVirt Node. I was planning on trying to install 4.4.9, but not sure if the ansible scripts will update it automatically when adding it to the cluster. > > Francesco - Did you get this resolved? > > Cheers, > > Chris. > > -----Original Message----- > > From: Milan Zamazal<mzamazal(a)redhat.com> <mailto:mzamazal@redhat.com> > > Sent: 14 February 2022 18:04 > > To: Francesco Lorenzini<francesco(a)shellrent.com> <mailto:francesco@shellrent.com> > > Cc: francesco--- via Users<users(a)ovirt.org> <mailto:users@ovirt.org> > > Subject: [ovirt-users] Re: Console - VNC password is 12 characters long, only 8 permitted > > Francesco Lorenzini<francesco(a)shellrent.com> <mailto:francesco@shellrent.com> writes: > > Hi Milan, > > thank you for your answer. > > So there is no other way/workaround? We must wait the fix in the > > engine and then upgrade? Maybe a downgrade of libvirt(?). > > I can't think about any other workaround, without modifying sources, than downgrading libvirt, until the fixed Engine is installed. > > I was looking up some config file in the host under /etc/libvirt and > > found the parameters vnc_password in qemu.conf file. I'm not sure that > > setting a password per host in this config file works, casue it is > > still passed via xml... > > In theory, you could set the default password there and remove passwords from the domain XMLs using Vdsm hooks. You would have to do it on all the hosts or handle migrations accordingly. Downgrading libvirt looks much easier. > > The default VNC password. Only 8 bytes are significant for # VNC > > passwords. This parameter is only used if the per-domain # XML config > > does not already provide a password. > > Francesco > > Il 14/02/2022 12:41, Milan Zamazal ha scritto: > > francesco--- via Users<users(a)ovirt.org> <mailto:users@ovirt.org> writes: > > Hi all, > > I'm using websockify + noVNC for expose the vm console via browser getting the graphicsconsoles ticket via API. Everything works fine for every other host that I have (more than 200), the console works either via oVirt engine and via browser) but just for a single host (CentOS Stream release 8, oVirt 4.4.9) the console works only via engine but when I try the connection via browser I get the following error (vdsm log of the host): > > ERROR FINISH updateDevice error=unsupported configuration: VNC password is 12 characters long, only 8 permitted > > Traceback (most recent call last): > > File "/usr/lib/python3.6/site-packages/vdsm/common/api.py", line 124, in method > > ret = func(*args, **kwargs) > > File "/usr/lib/python3.6/site-packages/vdsm/API.py", line 372, in updateDevice > > return self.vm.updateDevice(params) > > File "/usr/lib/python3.6/site-packages/vdsm/virt/vm.py", line 3389, in updateDevice > > return self._updateGraphicsDevice(params) > > File "/usr/lib/python3.6/site-packages/vdsm/virt/vm.py", line 3365, in _updateGraphicsDevice > > params['params'] > > File "/usr/lib/python3.6/site-packages/vdsm/virt/vm.py", line 5169, in _setTicketForGraphicDev > > self._dom.updateDeviceFlags(xmlutils.tostring(graphics), 0) > > File "/usr/lib/python3.6/site-packages/vdsm/virt/virdomain.py", line 101, in f > > ret = attr(*args, **kwargs) > > File "/usr/lib/python3.6/site-packages/vdsm/common/libvirtconnection.py", line 131, in wrapper > > ret = f(*args, **kwargs) > > File "/usr/lib/python3.6/site-packages/vdsm/common/function.py", line 94, in wrapper > > return func(inst, *args, **kwargs) > > File "/usr/lib64/python3.6/site-packages/libvirt.py", line 3244, in updateDeviceFlags > > raise libvirtError('virDomainUpdateDeviceFlags() failed') > > libvirt.libvirtError: unsupported configuration: VNC password is > > 12 characters long, only 8 permitted > > The error is pretty much self explanatory but, I can't manage to > > figure out why only on this server > > Hi, > > this happens with libvirt 8.0. > > and I wonder if I can set the length of the generated vnc password > > somewhere. > > I don't think so, it must be fixed in Engine. See > > https://github.com/oVirt/ovirt-engine/commit/a1e7e39348550b575f1f01b7 > > 01105f9e1066b09f > > for more details. > > Regards, > > Milan > > _______________________________________________ > > Users mailing list--users(a)ovirt.org > > To unsubscribe send an emailtousers-leave(a)ovirt.org Privacy > > Statement:https://www.ovirt.org/privacy-policy.html > > oVirt Code of > > Conduct:https://www.ovirt.org/community/about/community-guidelines/ > > List > > Archives:https://lists.ovirt.org/archives/list/users@ovirt.org/messag > > e/XJMULDXFHBYK3GNICAJRASQCSLBIFJV7/ > > _______________________________________________ > > Users mailing list --users(a)ovirt.org > > To unsubscribe send an email tousers-leave(a)ovirt.org Privacy Statement:https://www.ovirt.org/privacy-policy.html > > oVirt Code of Conduct:https://www.ovirt.org/community/about/community-guidelines/ > > List Archives:https://lists.ovirt.org/archives/list/users@ovirt.org/message/CE3A… > > _______________________________________________ > > Users mailing list --users(a)ovirt.org > > To unsubscribe send an email tousers-leave(a)ovirt.org > > Privacy Statement:https://www.ovirt.org/privacy-policy.html > > oVirt Code of Conduct:https://www.ovirt.org/community/about/community-guidelines/ > > List Archives:https://lists.ovirt.org/archives/list/users@ovirt.org/message/ESU5… > > -- > > -- > > > > > > Shellrent - Il primo hosting italiano Security First > > > > > *Francesco Lorenzini* > /System Administrator & DevOps Engineer/ > Shellrent Srl > > Via dell'Edilizia, 19 - 36100 Vicenza > Tel. 0444321155 <tel:+390444321155> > > > _______________________________________________ > Users mailing list --users(a)ovirt.org > To unsubscribe send an email tousers-leave(a)ovirt.org > Privacy Statement:https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct:https://www.ovirt.org/community/about/community-guidelines/ > List Archives:https://lists.ovirt.org/archives/list/users@ovirt.org/message/5DPN… -- -- Shellrent - Il primo hosting italiano Security First *Francesco Lorenzini* /System Administrator & DevOps Engineer/ Shellrent Srl Via dell'Edilizia, 19 - 36100 Vicenza Tel. 0444321155 <tel:+390444321155>

2 1

Inquire about the 'ovirt_cinderlib' tables
by ssarang520＠gmail.com 15 Mar '22

15 Mar '22

Hi, I want to know about some tables in 'ovirt_cinderlib' DB. Could you please explain the 'consistencygroups', 'services', 'groups' tables? Many thanks.

2 1

Re: Console - VNC password is 12 characters long, only 8 permitted
by Francesco Lorenzini 14 Mar '22

14 Mar '22

Hi Crhis, I didn't resolve properly, I found that downgrading libvirt was the fastest workaround. Just downgrade libvirt via yum/dnf to to version 7.10. I added the downgrade in an Ansible task, if you are practical: - name: Ensure libvirt-7.10.0 is installed yum: name: libvirt-7.10.0 state: present update_cache: true allow_downgrade: true ignore_errors: true or via cli : yum install libvirt-7.10.0 Post dowgrade we performed a restart of vdsm (or super-vdsm, or both, I don't remember). The downgrade is quite safe, we didn't encounter any problem with existing hosts and new deployed one. Francesco Il 14/03/2022 15:58, Christopher Law ha scritto: > Hi - > > Did anyone get a solution to this. I just upgraded our physical ovirt-engine to 4.4.10 and added a freshly installed oVirt Node 4.4.10, and I'm getting this issue. > > Given libvirt8 is part of oVirt Node 4.4.10 base install I was hoping for a fix. Also seen a fix applied here:https://github.com/oVirt/ovirt-engine/commit/a1e7e39348550b575f1f01b70… but not sure if this has been released? > > What are my options, not quite sure how to downgrade libvirt in oVirt Node. I was planning on trying to install 4.4.9, but not sure if the ansible scripts will update it automatically when adding it to the cluster. > > Francesco - Did you get this resolved? > > Cheers, > > Chris. > > -----Original Message----- > From: Milan Zamazal<mzamazal(a)redhat.com> > Sent: 14 February 2022 18:04 > To: Francesco Lorenzini<francesco(a)shellrent.com> > Cc: francesco--- via Users<users(a)ovirt.org> > Subject: [ovirt-users] Re: Console - VNC password is 12 characters long, only 8 permitted > > Francesco Lorenzini<francesco(a)shellrent.com> writes: > >> Hi Milan, >> >> thank you for your answer. >> >> So there is no other way/workaround? We must wait the fix in the >> engine and then upgrade? Maybe a downgrade of libvirt(?). > I can't think about any other workaround, without modifying sources, than downgrading libvirt, until the fixed Engine is installed. > >> I was looking up some config file in the host under /etc/libvirt and >> found the parameters vnc_password in qemu.conf file. I'm not sure that >> setting a password per host in this config file works, casue it is >> still passed via xml... > In theory, you could set the default password there and remove passwords from the domain XMLs using Vdsm hooks. You would have to do it on all the hosts or handle migrations accordingly. Downgrading libvirt looks much easier. > >>> The default VNC password. Only 8 bytes are significant for # VNC >>> passwords. This parameter is only used if the per-domain # XML config >>> does not already provide a password. >> Francesco >> >> Il 14/02/2022 12:41, Milan Zamazal ha scritto: >>> francesco--- via Users<users(a)ovirt.org> writes: >>> >>>> Hi all, >>>> >>>> I'm using websockify + noVNC for expose the vm console via browser getting the graphicsconsoles ticket via API. Everything works fine for every other host that I have (more than 200), the console works either via oVirt engine and via browser) but just for a single host (CentOS Stream release 8, oVirt 4.4.9) the console works only via engine but when I try the connection via browser I get the following error (vdsm log of the host): >>>> >>>> ERROR FINISH updateDevice error=unsupported configuration: VNC password is 12 characters long, only 8 permitted >>>> Traceback (most recent call last): >>>> File "/usr/lib/python3.6/site-packages/vdsm/common/api.py", line 124, in method >>>> ret = func(*args, **kwargs) >>>> File "/usr/lib/python3.6/site-packages/vdsm/API.py", line 372, in updateDevice >>>> return self.vm.updateDevice(params) >>>> File "/usr/lib/python3.6/site-packages/vdsm/virt/vm.py", line 3389, in updateDevice >>>> return self._updateGraphicsDevice(params) >>>> File "/usr/lib/python3.6/site-packages/vdsm/virt/vm.py", line 3365, in _updateGraphicsDevice >>>> params['params'] >>>> File "/usr/lib/python3.6/site-packages/vdsm/virt/vm.py", line 5169, in _setTicketForGraphicDev >>>> self._dom.updateDeviceFlags(xmlutils.tostring(graphics), 0) >>>> File "/usr/lib/python3.6/site-packages/vdsm/virt/virdomain.py", line 101, in f >>>> ret = attr(*args, **kwargs) >>>> File "/usr/lib/python3.6/site-packages/vdsm/common/libvirtconnection.py", line 131, in wrapper >>>> ret = f(*args, **kwargs) >>>> File "/usr/lib/python3.6/site-packages/vdsm/common/function.py", line 94, in wrapper >>>> return func(inst, *args, **kwargs) >>>> File "/usr/lib64/python3.6/site-packages/libvirt.py", line 3244, in updateDeviceFlags >>>> raise libvirtError('virDomainUpdateDeviceFlags() failed') >>>> libvirt.libvirtError: unsupported configuration: VNC password is >>>> 12 characters long, only 8 permitted >>>> >>>> >>>> The error is pretty much self explanatory but, I can't manage to >>>> figure out why only on this server >>> Hi, >>> >>> this happens with libvirt 8.0. >>> >>>> and I wonder if I can set the length of the generated vnc password >>>> somewhere. >>> I don't think so, it must be fixed in Engine. See >>> https://github.com/oVirt/ovirt-engine/commit/a1e7e39348550b575f1f01b7 >>> 01105f9e1066b09f >>> for more details. >>> >>> Regards, >>> Milan >>> _______________________________________________ >>> Users mailing list --users(a)ovirt.org >>> To unsubscribe send an emailtousers-leave(a)ovirt.org Privacy >>> Statement:https://www.ovirt.org/privacy-policy.html >>> oVirt Code of >>> Conduct:https://www.ovirt.org/community/about/community-guidelines/ >>> List >>> Archives:https://lists.ovirt.org/archives/list/users@ovirt.org/messag >>> e/XJMULDXFHBYK3GNICAJRASQCSLBIFJV7/ > _______________________________________________ > Users mailing list --users(a)ovirt.org > To unsubscribe send an email tousers-leave(a)ovirt.org Privacy Statement:https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct:https://www.ovirt.org/community/about/community-guidelines/ > List Archives:https://lists.ovirt.org/archives/list/users@ovirt.org/message/CE3A… > _______________________________________________ > Users mailing list --users(a)ovirt.org > To unsubscribe send an email tousers-leave(a)ovirt.org > Privacy Statement:https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct:https://www.ovirt.org/community/about/community-guidelines/ > List Archives:https://lists.ovirt.org/archives/list/users@ovirt.org/message/ESU5… -- -- Shellrent - Il primo hosting italiano Security First *Francesco Lorenzini* /System Administrator & DevOps Engineer/ Shellrent Srl Via dell'Edilizia, 19 - 36100 Vicenza Tel. 0444321155 <tel:+390444321155>

2 1

Console - VNC password is 12 characters long, only 8 permitted
by francesco＠shellrent.com 14 Mar '22

14 Mar '22

Hi all, I'm using websockify + noVNC for expose the vm console via browser getting the graphicsconsoles ticket via API. Everything works fine for every other host that I have (more than 200), the console works either via oVirt engine and via browser) but just for a single host (CentOS Stream release 8, oVirt 4.4.9) the console works only via engine but when I try the connection via browser I get the following error (vdsm log of the host): ERROR FINISH updateDevice error=unsupported configuration: VNC password is 12 characters long, only 8 permitted Traceback (most recent call last): File "/usr/lib/python3.6/site-packages/vdsm/common/api.py", line 124, in method ret = func(*args, **kwargs) File "/usr/lib/python3.6/site-packages/vdsm/API.py", line 372, in updateDevice return self.vm.updateDevice(params) File "/usr/lib/python3.6/site-packages/vdsm/virt/vm.py", line 3389, in updateDevice return self._updateGraphicsDevice(params) File "/usr/lib/python3.6/site-packages/vdsm/virt/vm.py", line 3365, in _updateGraphicsDevice params['params'] File "/usr/lib/python3.6/site-packages/vdsm/virt/vm.py", line 5169, in _setTicketForGraphicDev self._dom.updateDeviceFlags(xmlutils.tostring(graphics), 0) File "/usr/lib/python3.6/site-packages/vdsm/virt/virdomain.py", line 101, in f ret = attr(*args, **kwargs) File "/usr/lib/python3.6/site-packages/vdsm/common/libvirtconnection.py", line 131, in wrapper ret = f(*args, **kwargs) File "/usr/lib/python3.6/site-packages/vdsm/common/function.py", line 94, in wrapper return func(inst, *args, **kwargs) File "/usr/lib64/python3.6/site-packages/libvirt.py", line 3244, in updateDeviceFlags raise libvirtError('virDomainUpdateDeviceFlags() failed') libvirt.libvirtError: unsupported configuration: VNC password is 12 characters long, only 8 permitted The error is pretty much self explanatory but, I can't manage to figure out why only on this server and I wonder if I can set the length of the generated vnc password somewhere. Thank you for your time, Francesco

4 4

Link multiple self-hosted engines
by ravi k 14 Mar '22

14 Mar '22

Hello, We are planning to install self-hosted engines in our production and DR locations which are separated physically. VMware's vcenter has a feature wherein we can link vcenters so we can access both DCs in the same console. Do we have something like that in oVirt as well? I was searching and found this for oVirt 3.5 https://lists.ovirt.org/archives/list/users@ovirt.org/thread/4LDSUM4NRHUONO… The suggestion which mentions about using ManageIq seemed interesting. If anyone is managing multiple oVirt environments please share some ideas from experience. Regards, Ravi

1 1

about the time of the warning message on the engine web
by Tommy Sway 14 Mar '22

14 Mar '22

Why is the alarm information displayed on the ovirt Engine information page inconsistent with the actual time, or even later than the current time? The time of the server where the engine resides and the managed servers have been synchronized to the latest time. Why does a similar problem occur? Thanks.

1 0

Re: [External] : Importing KVMs and QCOW
by Abe E 11 Mar '22

11 Mar '22

Thanks for the reply. Yes I was able to make it work in the end, for some reason Ovirt didnt recognize the QCOW or Raw files as they were, so instead I took the vmdk my vendor provided me and converted it to qcow and ovirt then recognized it correctly.

1 0

Import ova Thin provisioned disk conversion to pre allocated disks fails
by simon＠justconnect.ie 11 Mar '22

11 Mar '22

Hi All, During the ova import process, preallocated disk policy is selected and the VM is imported successfully. Unfortunately the disks remain as Thin Provisioned - is this a known bug and is there a workaround? Kind Regards Simon...

3 4

Long shot on VM failing to start
by simon＠justconnect.ie 11 Mar '22

11 Mar '22

We are moving to an oVirt 4.4.9 environment from a 4.3.4.3 environment and have run into a major issue. The method for migration to the new system is to shutdown a VM on the old system, build a new VM on the new system with the same IP/name etc. This has worked for several VMs so far but the latest new build failed and we had to roll back - i.e. start the old VM. The old VM fails to start with the following message in the VMs libvirt qemu log: libvirtd quit during handshake: Input/output error shutting down, reason=failed Any ideas? Regards Simon...

3 3

hosted-engine failed to deploy
by giovanni.ferioli＠gmail.com 11 Mar '22

11 Mar '22

hello i try to deploy a vm engine this host have already a vm that contains various service named dhcp etc i try to deploy with the cmd: hosted-engine --deploy and i get blocked with error msg INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Restore initial abrt config files] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Restart abrtd service] [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "Unable to restart service abrtd: Failed to restart abrtd.service: Transaction contains conflicting jobs 'stop' and 'restart' for abrt-ccpp.service. Probably contradicting requirement dependencies configured.\nSee system logs and 'systemctl status abrtd.service' for details.\n"} [ ERROR ] Failed to execute stage 'Closing up': Failed executing ansible-playbook [ INFO ] Stage: Clean up the host : oVirt Node 4.4.10 can you suggest some troubleshooting check ? thanks and regards

2 1