Host deploy failure: Configure OVN for oVirt
by stephan.badenhorst＠fnb.co.za
Good day,
I am running into a problem during host deploy via the oVirt engine GUI since upgrading to ovirt-engine-4.5.5-1.el8. The "Configure OVN for oVirt" task seem to fail when trying to run the vdsm-tool ovn-config command. Host deploy used to work fine when the engine was on version 4.5.4.
Anyone that can guide me on the right path to get past this issue?
Does not seem to be a new problem - https://lists.ovirt.org/archives/list/users@ovirt.org/thread/IDLGSBQFX35E...
Log extract:
2024-02-01 14:48:19 SAST - TASK [ovirt-provider-ovn-driver : Configure OVN for oVirt] *********************
.
.
.
"stdout" : "fatal: [mob-r1-l-ovirt-aa-1-23.x.fnb.co.za]: FAILED! => {\"changed\": true, \"cmd\": [\"vdsm-tool\", \"ovn-config\", \"192.168.2.100\", \"host23.mydomain.com\"], \"delta\": \"0:00:00.538143\", \"end
\": \"2024-02-01 14:48:20.596823\", \"msg\": \"non-zero return code\", \"rc\": 1, \"start\": \"2024-02-01 14:48:20.058680\", \"stderr\": \"Traceback (most recent call last):\\n File \\\"/usr/lib/python3.6/site-packages/vdsm/t
ool/ovn_config.py\\\", line 117, in get_network\\n return networks[net_name]\\nKeyError: 'host23.mydomain.com'\\n\\nDuring handling of the above exception, another exception occurred:\\n\\nTraceback (most rec
ent call last):\\n File \\\"/usr/bin/vdsm-tool\\\", line 195, in main\\n return tool_command[cmd][\\\"command\\\"](*args)\\n File \\\"/usr/lib/python3.6/site-packages/vdsm/tool/ovn_config.py\\\", line 63, in ovn_config\\n
ip_address = get_ip_addr(get_network(network_caps(), net_name))\\n File \\\"/usr/lib/python3.6/site-packages/vdsm/tool/ovn_config.py\\\", line 119, in get_network\\n raise NetworkNotFoundError(net_name)\\nvdsm.tool.ovn
_config.NetworkNotFoundError: host23.mydomain.com\", \"stderr_lines\": [\"Traceback (most recent call last):\", \" File \\\"/usr/lib/python3.6/site-packages/vdsm/tool/ovn_config.py\\\", line 117, in get_network
\", \" return networks[net_name]\", \"KeyError: 'host23.mydomain.com'\", \"\", \"During handling of the above exception, another exception occurred:\", \"\", \"Traceback (most recent call last):\", \" File \
\\"/usr/bin/vdsm-tool\\\", line 195, in main\", \" return tool_command[cmd][\\\"command\\\"](*args)\", \" File \\\"/usr/lib/python3.6/site-packages/vdsm/tool/ovn_config.py\\\", line 63, in ovn_config\", \" ip_address =
get_ip_addr(get_network(network_caps(), net_name))\", \" File \\\"/usr/lib/python3.6/site-packages/vdsm/tool/ovn_config.py\\\", line 119, in get_network\", \" raise NetworkNotFoundError(net_name)\", \"vdsm.tool.ovn_config.
NetworkNotFoundError: host23.mydomain.com\"], \"stdout\": \"\", \"stdout_lines\": []}",
Thanks in advance!!
Stephan
6 days, 1 hour
Unable to access ovirt Admin Screen from ovirt Host
by louisb＠ameritech.net
I've reinstalled ovirt 4.4 on my server remotely via cockpit terminal. I'm able to access the ovirt admin screen remotely from the laptop that I used for the install. However, using the same URL I'm unable to gain access to the admin screen.
Following the instruction in the documentation I've modified the file: /etc/ovirt-engine/engine.conf.d/99-custom-sso-setup.conf, to reflect the DNS name and I enter in the IP address. But I'm still unable to access the screen from the server console.
What else needs to change in order to gain access from the server console?
Thanks
2 weeks, 2 days
SPM and Task error ...
by Enrico
Hi all,
my ovirt cluster has got 3 Hypervisors runnig Centos 7.5.1804 vdsm is
4.20.39.1-1.el7,
ovirt engine is 4.2.4.5-1.el7, the storage systems are HP MSA P2000 and
2050 (fibre channel).
I need to stop one of the hypervisors for maintenance but this system is
the storage pool manager.
For this reason I decided to manually activate SPM in one of the other
nodes but this operation is not
successful.
In the ovirt engine (engine.log) the error is this:
2019-07-25 12:39:16,744+02 INFO
[org.ovirt.engine.core.bll.storage.pool.ForceSelectSPMCommand] (default
task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] Running command:
ForceSelectSPMCommand internal: false. Entities affected : ID:
81c9bd3c-ae0a-467f-bf7f-63ab30cd8d9e Type: VDSAction group
MANIPULATE_HOST with role type ADMIN
2019-07-25 12:39:16,745+02 INFO
[org.ovirt.engine.core.vdsbroker.irsbroker.SpmStopOnIrsVDSCommand]
(default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] START,
SpmStopOnIrsVDSCommand(
SpmStopOnIrsVDSCommandParameters:{storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7',
ignoreFailoverLimit='false'}), log id: 37bf4639
2019-07-25 12:39:16,747+02 INFO
[org.ovirt.engine.core.vdsbroker.irsbroker.ResetIrsVDSCommand] (default
task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] START,
ResetIrsVDSCommand(
ResetIrsVDSCommandParameters:{storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7',
ignoreFailoverLimit='false',
vdsId='751f3e99-b95e-4c31-bc38-77f5661a0bdc',
ignoreStopFailed='false'}), log id: 2522686f
2019-07-25 12:39:16,749+02 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.SpmStopVDSCommand] (default
task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] START,
SpmStopVDSCommand(HostName = infn-vm05.management,
SpmStopVDSCommandParameters:{hostId='751f3e99-b95e-4c31-bc38-77f5661a0bdc',
storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7'}), log id: 1810fd8b
2019-07-25 12:39:16,758+02 *ERROR*
[org.ovirt.engine.core.vdsbroker.vdsbroker.SpmStopVDSCommand] (default
task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] SpmStopVDSCommand::Not
stopping SPM on vds 'infn-vm05.management', pool id
'18d57688-6ed4-43b8-bd7c-0665b55950b7' as there are uncleared tasks
'Task 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e', status 'running''
2019-07-25 12:39:16,758+02 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.SpmStopVDSCommand] (default
task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] FINISH,
SpmStopVDSCommand, log id: 1810fd8b
2019-07-25 12:39:16,758+02 INFO
[org.ovirt.engine.core.vdsbroker.irsbroker.ResetIrsVDSCommand] (default
task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] FINISH,
ResetIrsVDSCommand, log id: 2522686f
2019-07-25 12:39:16,758+02 INFO
[org.ovirt.engine.core.vdsbroker.irsbroker.SpmStopOnIrsVDSCommand]
(default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] FINISH,
SpmStopOnIrsVDSCommand, log id: 37bf4639
2019-07-25 12:39:16,760+02 *ERROR*
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] EVENT_ID:
USER_FORCE_SELECTED_SPM_STOP_FAILED(4,096), Failed to force select
infn-vm07.management as the SPM due to a failure to stop the current SPM.
while in the hypervisor (SPM) vdsm.log:
2019-07-25 12:39:16,744+02 INFO
[org.ovirt.engine.core.bll.storage.pool.ForceSelectSPMCommand] (default
task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] Running command:
ForceSelectSPMCommand internal: false. Entities affected : ID:
81c9bd3c-ae0a-467f-bf7f-63ab30cd8d9e Type: VDSAction group
MANIPULATE_HOST with role type ADMIN
2019-07-25 12:39:16,745+02 INFO
[org.ovirt.engine.core.vdsbroker.irsbroker.SpmStopOnIrsVDSCommand]
(default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] START,
SpmStopOnIrsVDSCommand(
SpmStopOnIrsVDSCommandParameters:{storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7',
ignoreFailoverLimit='false'}), log id: 37bf4639
2019-07-25 12:39:16,747+02 INFO
[org.ovirt.engine.core.vdsbroker.irsbroker.ResetIrsVDSCommand] (default
task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] START,
ResetIrsVDSCommand(
ResetIrsVDSCommandParameters:{storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7',
ignoreFailoverLimit='false',
vdsId='751f3e99-b95e-4c31-bc38-77f5661a0bdc',
ignoreStopFailed='false'}), log id: 2522686f
2019-07-25 12:39:16,749+02 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.SpmStopVDSCommand] (default
task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] START,
SpmStopVDSCommand(HostName = infn-vm05.management,
SpmStopVDSCommandParameters:{hostId='751f3e99-b95e-4c31-bc38-77f5661a0bdc',
storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7'}), log id: 1810fd8b
2019-07-25 12:39:16,758+02 *ERROR*
[org.ovirt.engine.core.vdsbroker.vdsbroker.SpmStopVDSCommand] (default
task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] SpmStopVDSCommand::Not
stopping SPM on vds 'infn-vm05.management', pool id
'18d57688-6ed4-43b8-bd7c-0665b55950b7' as there are uncleared tasks
'Task 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e', status 'running''
2019-07-25 12:39:16,758+02 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.SpmStopVDSCommand] (default
task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] FINISH,
SpmStopVDSCommand, log id: 1810fd8b
2019-07-25 12:39:16,758+02 INFO
[org.ovirt.engine.core.vdsbroker.irsbroker.ResetIrsVDSCommand] (default
task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] FINISH,
ResetIrsVDSCommand, log id: 2522686f
2019-07-25 12:39:16,758+02 INFO
[org.ovirt.engine.core.vdsbroker.irsbroker.SpmStopOnIrsVDSCommand]
(default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] FINISH,
SpmStopOnIrsVDSCommand, log id: 37bf4639
2019-07-25 12:39:16,760+02 *ERROR*
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] EVENT_ID:
USER_FORCE_SELECTED_SPM_STOP_FAILED(4,096), Failed to force select
infn-vm07.management as the SPM due to a failure to stop the current SPM.
2019-07-25 12:39:18,660+02 INFO
[org.ovirt.engine.core.bll.tasks.SPMAsyncTask]
(EE-ManagedThreadFactory-engineScheduled-Thread-67) [] Task id
'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' has passed pre-polling period
time and should be polled. Pre-polling period is 60000 millis.
2019-07-25 12:39:18,660+02 INFO
[org.ovirt.engine.core.bll.tasks.SPMAsyncTask]
(EE-ManagedThreadFactory-engineScheduled-Thread-67) [] Task id
'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' has passed pre-polling period
time and should be polled. Pre-polling period is 60000 millis.
2019-07-25 12:39:18,750+02 INFO
[org.ovirt.engine.core.bll.tasks.SPMAsyncTask]
(EE-ManagedThreadFactory-engineScheduled-Thread-67) [] Task id
'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' has passed pre-polling period
time and should be polled. Pre-polling period is 60000 millis.
2019-07-25 12:39:18,750+02 *ERROR*
[org.ovirt.engine.core.bll.tasks.SPMAsyncTask]
(EE-ManagedThreadFactory-engineScheduled-Thread-67) []
BaseAsyncTask::logEndTaskFailure: Task
'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' (Parent Command 'Unknown',
Parameters Type
'org.ovirt.engine.core.common.asynctasks.AsyncTaskParameters') ended
with failure:
2019-07-25 12:39:18,750+02 INFO
[org.ovirt.engine.core.bll.tasks.SPMAsyncTask]
(EE-ManagedThreadFactory-engineScheduled-Thread-67) []
SPMAsyncTask::ClearAsyncTask: Attempting to clear task
'fdcf4d1b-82fe-49a6-b233-323ebe568f8e'
2019-07-25 12:39:18,751+02 INFO
[org.ovirt.engine.core.vdsbroker.irsbroker.SPMClearTaskVDSCommand]
(EE-ManagedThreadFactory-engineScheduled-Thread-67) [] START,
SPMClearTaskVDSCommand(
SPMTaskGuidBaseVDSCommandParameters:{storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7',
ignoreFailoverLimit='false',
taskId='fdcf4d1b-82fe-49a6-b233-323ebe568f8e'}), log id: 34ae2b2f
2019-07-25 12:39:18,752+02 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.HSMClearTaskVDSCommand]
(EE-ManagedThreadFactory-engineScheduled-Thread-67) [] START,
HSMClearTaskVDSCommand(HostName = infn-vm05.management,
HSMTaskGuidBaseVDSCommandParameters:{hostId='751f3e99-b95e-4c31-bc38-77f5661a0bdc',
taskId='fdcf4d1b-82fe-49a6-b233-323ebe568f8e'}), log id: d3a78ad
2019-07-25 12:39:18,757+02 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.HSMClearTaskVDSCommand]
(EE-ManagedThreadFactory-engineScheduled-Thread-67) [] FINISH,
HSMClearTaskVDSCommand, log id: d3a78ad
2019-07-25 12:39:18,757+02 INFO
[org.ovirt.engine.core.vdsbroker.irsbroker.SPMClearTaskVDSCommand]
(EE-ManagedThreadFactory-engineScheduled-Thread-67) [] FINISH,
SPMClearTaskVDSCommand, log id: 34ae2b2f
2019-07-25 12:39:18,757+02 INFO
[org.ovirt.engine.core.bll.tasks.SPMAsyncTask]
(EE-ManagedThreadFactory-engineScheduled-Thread-67) []
SPMAsyncTask::ClearAsyncTask: At time of attempt to clear task
'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' the response code was
'TaskStateError' and message was 'Operation is not allowed in this task
state: ("can't clean in state running",)'. Task will not be cleaned
2019-07-25 12:39:18,757+02 INFO
[org.ovirt.engine.core.bll.tasks.SPMAsyncTask]
(EE-ManagedThreadFactory-engineScheduled-Thread-67) []
BaseAsyncTask::onTaskEndSuccess: Task
'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' (Parent Command 'Unknown',
Parameters Type
'org.ovirt.engine.core.common.asynctasks.AsyncTaskParameters') ended
successfully.
2019-07-25 12:39:18,757+02 INFO
[org.ovirt.engine.core.bll.tasks.SPMAsyncTask]
(EE-ManagedThreadFactory-engineScheduled-Thread-67) []
SPMAsyncTask::ClearAsyncTask: Attempting to clear task
'fdcf4d1b-82fe-49a6-b233-323ebe568f8e'
2019-07-25 12:39:18,758+02 INFO
[org.ovirt.engine.core.vdsbroker.irsbroker.SPMClearTaskVDSCommand]
(EE-ManagedThreadFactory-engineScheduled-Thread-67) [] START,
SPMClearTaskVDSCommand(
SPMTaskGuidBaseVDSCommandParameters:{storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7',
ignoreFailoverLimit='false',
taskId='fdcf4d1b-82fe-49a6-b233-323ebe568f8e'}), log id: 42de0c2b
2019-07-25 12:39:18,759+02 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.HSMClearTaskVDSCommand]
(EE-ManagedThreadFactory-engineScheduled-Thread-67) [] START,
HSMClearTaskVDSCommand(HostName = infn-vm05.management,
HSMTaskGuidBaseVDSCommandParameters:{hostId='751f3e99-b95e-4c31-bc38-77f5661a0bdc',
taskId='fdcf4d1b-82fe-49a6-b233-323ebe568f8e'}), log id: 4895c79c
2019-07-25 12:39:18,764+02 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.HSMClearTaskVDSCommand]
(EE-ManagedThreadFactory-engineScheduled-Thread-67) [] FINISH,
HSMClearTaskVDSCommand, log id: 4895c79c
2019-07-25 12:39:18,764+02 INFO
[org.ovirt.engine.core.vdsbroker.irsbroker.SPMClearTaskVDSCommand]
(EE-ManagedThreadFactory-engineScheduled-Thread-67) [] FINISH,
SPMClearTaskVDSCommand, log id: 42de0c2b
2019-07-25 12:39:18,764+02 INFO
[org.ovirt.engine.core.bll.tasks.SPMAsyncTask]
(EE-ManagedThreadFactory-engineScheduled-Thread-67) []
SPMAsyncTask::ClearAsyncTask: At time of attempt to clear task
'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' the response code was
'TaskStateError' and message was 'Operation is not allowed in this task
state: ("can't clean in state running",)'. Task will not be cleaned
2019-07-25 12:39:18,764+02 INFO
[org.ovirt.engine.core.bll.tasks.SPMAsyncTask]
(EE-ManagedThreadFactory-engineScheduled-Thread-67) [] Task id
'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' has passed pre-polling period
time and should be polled. Pre-polling period is 60000 millis.
2019-07-25 12:39:18,764+02 INFO
[org.ovirt.engine.core.bll.tasks.AsyncTaskManager]
(EE-ManagedThreadFactory-engineScheduled-Thread-67) [] Cleaning zombie
tasks: Clearing async task 'Unknown' that started at 'Fri May 03
14:48:50 CEST 2019'
2019-07-25 12:39:18,764+02 INFO
[org.ovirt.engine.core.bll.tasks.SPMAsyncTask]
(EE-ManagedThreadFactory-engineScheduled-Thread-67) []
SPMAsyncTask::ClearAsyncTask: Attempting to clear task
'fdcf4d1b-82fe-49a6-b233-323ebe568f8e'
2019-07-25 12:39:18,765+02 INFO
[org.ovirt.engine.core.vdsbroker.irsbroker.SPMClearTaskVDSCommand]
(EE-ManagedThreadFactory-engineScheduled-Thread-67) [] START,
SPMClearTaskVDSCommand(
SPMTaskGuidBaseVDSCommandParameters:{storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7',
ignoreFailoverLimit='false',
taskId='fdcf4d1b-82fe-49a6-b233-323ebe568f8e'}), log id: da77af2
2019-07-25 12:39:18,766+02 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.HSMClearTaskVDSCommand]
(EE-ManagedThreadFactory-engineScheduled-Thread-67) [] START,
HSMClearTaskVDSCommand(HostName = infn-vm05.management,
HSMTaskGuidBaseVDSCommandParameters:{hostId='751f3e99-b95e-4c31-bc38-77f5661a0bdc',
taskId='fdcf4d1b-82fe-49a6-b233-323ebe568f8e'}), log id: 530694fb
2019-07-25 12:39:18,771+02 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.HSMClearTaskVDSCommand]
(EE-ManagedThreadFactory-engineScheduled-Thread-67) [] FINISH,
HSMClearTaskVDSCommand, log id: 530694fb
2019-07-25 12:39:18,771+02 INFO
[org.ovirt.engine.core.vdsbroker.irsbroker.SPMClearTaskVDSCommand]
(EE-ManagedThreadFactory-engineScheduled-Thread-67) [] FINISH,
SPMClearTaskVDSCommand, log id: da77af2
2019-07-25 12:39:18,771+02 INFO
[org.ovirt.engine.core.bll.tasks.SPMAsyncTask]
(EE-ManagedThreadFactory-engineScheduled-Thread-67) []
SPMAsyncTask::ClearAsyncTask: At time of attempt to clear task
'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' the response code was
'TaskStateError' and message was 'Operation is not allowed in this task
state: ("can't clean in state running",)'. Task will not be cleaned
there is some relation between this error and a task that has remained
hanging, from SPM server:
# vdsm-client Task getInfo taskID=fdcf4d1b-82fe-49a6-b233-323ebe568f8e
{
"verb": "prepareMerge",
"id": "fdcf4d1b-82fe-49a6-b233-323ebe568f8e"
}
# vdsm-client Task getStatus taskID=fdcf4d1b-82fe-49a6-b233-323ebe568f8e
{
"message": "running job 1 of 1",
"code": 0,
"taskID": "fdcf4d1b-82fe-49a6-b233-323ebe568f8e",
"taskResult": "",
"taskState": "running"
}
How can I solve this problem ?
Thanks a lot for your help !!
Best Regards
Enrico
--
_______________________________________________________________________
Enrico Becchetti Servizio di Calcolo e Reti
Istituto Nazionale di Fisica Nucleare - Sezione di Perugia
Via Pascoli,c/o Dipartimento di Fisica 06123 Perugia (ITALY)
Phone:+39 075 5852777 Mail: Enrico.Becchetti<at>pg.infn.it
_______________________________________________________________________
1 month
Latest 4.5.5 centos node install username password not working.
by antonio.riggio＠mail.com
I been trying to install 4.5.5 testing and used the node installer iso. I cant login what is the username and password I have tried what others have done in the forums with no luck admin@ovirt . root admin . Also can the engine be installed from the node via the cockpit still? How can I get logged in to do this? I have used 4.3 and didnt have any of these problems. It was really simple to do.
Any suggestions?
grazie
2 months
Storage Domain Not synchronized, To synchronize them, please move them to maintenance and then activate.
by Arup Jyoti Thakuria
Dear All,
In our Ovirt Engine Infrastructure, recently we have received an alert for one of our "Storage Domain"
The alert is as mentioned below----
===================================
Storage domains with IDs [fb34e5b7-e850-4d66-ab47-3011d2000338] could not be synchronized. To synchronize them, please move them to maintenance and then activate.
==========================================================
What is the consequence of this alert, if we ignore this what can happen to the infra, are we going to face any issue with the VMs, currently this infra is under production
3 months, 2 weeks
oVirt networks
by Enrico Becchetti
Dear all,
Ineed your help to understand how to configure the network of a new
oVirt cluster.
Mynew system will have a 4.3 engine thatruns in a virtual machine, andsome
Dell R7525 AMD EPYC hypervisors, eachholding two 4-port PCI network cards.
These servers will have node-ovirt image again in version 4.3.
As for the network, there are two HPE Aruba 2540G, non-stackable, with
24 1Gbs ports
and 2 10Gbs uplinks to the star center.
This is a simplified scheme:
My goal is to make the most of the server's 8 ethernet interfaces to have
both reliability and maximum possible throughput.
This cluster will have two virtual networks, one forovirt management and
one for
the traffic of individual virtual machines.
With that said here's what my idea is. I would like to have two links
aggregated by 4Gbs,
one for ovrtmgt and the other for vmnet.
With the ovirt web interface I can createan active-passive "Mode 1"
bond, but this
won'tallow me to go beyond 1Gbs. Alternatively I could create a "Mode 4"
bond
802.3ad but unfortunately the switches are not stacked and therefore not
even
this solution applies.
This is an example with active passive configuration:
Can you tell me if ovirt can generate//nested bonds? Or do you have
other solutions ?
Thanks a lot !
Best Regards
Enrico
--
_______________________________________________________________________
Enrico Becchetti Servizio di Calcolo e Reti
Istituto Nazionale di Fisica Nucleare - Sezione di Perugia
Via Pascoli,c/o Dipartimento di Fisica 06123 Perugia (ITALY)
Phone:+39 075 5852777 Skype:enrico_becchetti
Mail: Enrico.Becchetti<at>pg.infn.it
Pagina web personale: https://www.pg.infn.it/home/enrico-becchetti/
______________________________________________________________________
3 months, 4 weeks
boot from cdrom & error code 0005
by edp＠maddalena.it
Hi.
I have created a new storage domain (data domain, storage type nfs) to use it to upload iso images.
I have so uploaded a new iso and then attach the iso to a new vm.
But when I try to boot the vm I obtain this error:
booting from dvd/cd...
boot failed: could not read from cdrom (code 0005)
no bootable device
The iso file has been uploaded with success in the data storage domain and so the vm lets my attach the iso to the vm in the boot settings.
Can you help me?
Thank you
4 months
VM Migration Failed
by KSNull Zero
Running oVirt 4.4.5
VM cannot migrate between hosts.
vdsm.log contains the following error:
libvirt.libvirtError: operation failed: Failed to connect to remote libvirt URI qemu+tls://ovhost01.local/system: authentication failed: Failed to verify peer's certificate
Certificates on hosts was renewed some time ago. How this issue can be fixed ?
Thank you.
5 months, 2 weeks
How to re-enroll (or renew) host certificates for a single-host hosted-engine deployment?
by Derek Atkins
Hi,
I've got a single-host hosted-engine deployment that I originally
installed with 4.0 and have upgraded over the years to 4.3.10. I and some
of my users have upgraded remote-viewer and now I get an error when I try
to view the console of my VMs:
(remote-viewer:8252): Spice-WARNING **: 11:30:41.806:
../subprojects/spice-common/common/ssl_verify.c:477:openssl_verify: Error
in server certificate verification: CA signature digest algorithm too weak
(num=68:depth0:/O=<My Org Name>/CN=<Host's Name>)
I am 99.99% sure this is because the old certs use SHA1.
I reran engine-setup on the engine and it asked me if I wanted to renew
the PKI, and I answered yes. This replaced many[1] of the certificates in
/etc/pki/ovirt-engine/certs on the engine, but it did not update the
Host's certificate.
All the documentation I've seen says that to refresh this certificate I
need to put the host into maintenance mode and then re-enroll.. However I
cannot do that, because this is a single-host system so I cannot put the
host in local mode -- there is no place to migrate the VMs (let alone the
Engine VM).
So.... Is there a command-line way to re-enroll manually and update the
host certs? Or some other way to get all the leftover certs renewed?
Thanks,
-derek
[1] Not only did it not update the Host's cert, it did not update any of
the vmconsole-proxy certs, nor the certs in /etc/pki/ovirt-vmconsole/, and
obviously nothing in /etc/pki/ on the host itself.
--
Derek Atkins 617-623-3745
derek(a)ihtfp.com www.ihtfp.com
Computer and Internet Security Consultant
5 months, 4 weeks
4.5.4 with Ceph only storage
by Maurice Burrows
Hey ... A long story short ... I have an existing Red Hat Virt / Gluster hyperconverged solution that I am moving away from.
I have an existing Ceph cluster that I primarily use for OpenStack and a small requirement for S3 via RGW.
I'm planning to build a new oVirt 4.5.4 cluster on RHEL9 using Ceph for all storage requirements. I've read many online articles on oVirt and Ceph, and they all seem to use the Ceph iSCSI gateway, which is now in maintenance, so I'm not real keen to commit to iSCSI.
So my question is, IS there any reason I cannot use CephFS for both hosted-engine and as a data storage domain?
I'm currently running Ceph Pacific FWIW.
Cheers
6 months
