oVirt timeouts
by paf1＠email.cz
This is a multi-part message in MIME format.
--------------090402070806020609030609
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Transfer-Encoding: 7bit
Hello,
pls, howto change oVirt timeouts for status :
1) node ( brick) is power down / up
2) volume status for node(brick) is up/down
They are too long ( I'm expecting a few sec. not a lot of minutes )
If it has some spacial reason, let me know about, pls.
regs.
Pa.
--------------090402070806020609030609
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: 8bit
<html>
<head>
<meta http-equiv="content-type" content="text/html; charset=utf-8">
</head>
<body text="#000066" bgcolor="#FFFFFF">
Hello, <br>
<br>
pls, howto change oVirt timeouts for status :<br>
1) node ( brick) is power down / up<br>
2) volume status for node(brick) is up/down <br>
<br>
They are too long ( I'm expecting a few sec. not a lot of minutes )<br>
If it has some spacial reason, let me know about, pls.<br>
<br>
regs.<br>
Pa.<br>
</body>
</html>
--------------090402070806020609030609--
9 years, 6 months
Ovirt PXE boot wierdness
by Edson Manners
I'm running oVirt 3.5 newly installed with one test VM.
I have the engine running on separate HW with eth0 being the management
interface
I have 2 compute nodes with eth0 being the management interface and eth1
having a vlan trunk with all of the VM networks
If I install a guest from the CD image it all works fine and picks up an
IP from the DHCP server.
However if I switch the boot order to PXE first the gPXE DHCP request
times out. Using tcpdump I can see the DHCP discovery packets get as far
out as the physical trunk interfact eth1 (i.e. it gets past all of the
virtual interfaces) but any other machines in that same VLAN don't see
the DHCP request and neither does the DHCP server.
My network settings are:
Name: TestCluster
External Provider: NO
Network label: TC
Enable VLAN tagging: 306
VM network: YES
MTU: Default 1500
Under 'Setup Host Networks'
Boot Protocol: DHCP
Any ideas?
--
[Any errors in spelling, tact or fact are transmission errors]
- (Stolen from) Dag Wieers
Edson Manners
Systems Administrator, Research Computing Center
FSU Information Technology Services
Dirac Science Library., Room 150B
Tallahassee, Florida 32303-4120
9 years, 6 months
vdsm lvm filter
by Renout Gerrits
Hi All,
I've got a setup with with ovirt and an equallogic iscsi. Im using the dell
hit drivers. Install all good, after a reboot the storage won't come up.
>From the vdsm logs i can see the volume groups can't be found. in the lvm
vgs command the following filter is used: [ '\''r|.*|'\'' ] .
If I change the LVMCONF_TEMPLATE in /usr/share/vdsm/storage/lvm.py and add
the filter [ "a|^/dev/eql/ovirt.*|" ], the volume group is found and
storage will be attached.
How is the lvm filter constructed? And how can i make sure my volume groups
are found without editing /usr/share/vdsm/storage/lvm.py?
==snippet vdsm.log 1==
Thread-75::DEBUG::2015-06-11
13:25:03,496::lvm::291::Storage.Misc.excCmd::(cmd) /usr/bin/sudo -n
/sbin/lvm vgs --config ' devices { preferred_names = ["^/dev/mapper/"]
ignore_sus
pended_devices=1 write_cache_state=0 disable_after_error_count=3
obtain_device_list_from_udev=1 filter = [ '\''r|.*|'\'' ] } global {
locking_type=1 prioritise_write_locks=1
wait_for_locks=1 use_lvmetad=0 } backup { retain_min = 50 retain_days =
0 } ' --noheadings --units b --nosuffix --separator '|'
--ignoreskippedcluster -o uuid,name,attr,size,
free,extent_size,extent_count,free_count,tags,vg_mda_size,vg_mda_free,lv_count,pv_count,pv_name
9d551570-ef74-45b7-ba86-a908f1231ca8 (cwd None)
Thread-75::DEBUG::2015-06-11
13:25:03,825::lvm::291::Storage.Misc.excCmd::(cmd) FAILED: <err> = '
Volume group "9d551570-ef74-45b7-ba86-a908f1231ca8" not found\n Skipping
volum
e group 9d551570-ef74-45b7-ba86-a908f1231ca8\n'; <rc> = 5
Thread-75::WARNING::2015-06-11
13:25:03,828::lvm::376::Storage.LVM::(_reloadvgs) lvm vgs failed: 5 [] ['
Volume group "9d551570-ef74-45b7-ba86-a908f1231ca8" not found', ' Skipp
ing volume group 9d551570-ef74-45b7-ba86-a908f1231ca8']
==
==snippet vdsm.log 2==
storageRefresh::DEBUG::2015-06-11
13:37:13,602::lvm::292::Storage.Misc.excCmd::(cmd) /usr/bin/sudo -n
/sbin/lvm lvs --config ' devices { preferred_names = ["^/dev/mapper/"]
ignore_suspended_devices=1 write_cache_state=0 disable_after_error_count=3
obtain_device_list_from_udev=0 filter = [ "a|^/dev/eql/ovirt.*|" ] filter =
[ '\''r|.*|'\'' ] } global { locking_type=1 prioritise_write_locks=1
wait_for_locks=1 use_lvmetad=0 } backup { retain_min = 50 retain_days
= 0 } ' --noheadings --units b --nosuffix --separator '|'
--ignoreskippedcluster -o
uuid,name,vg_name,attr,size,seg_start_pe,devices,tags (cwd None)
storageRefresh::DEBUG::2015-06-11
13:37:13,978::lvm::292::Storage.Misc.excCmd::(cmd) SUCCESS: <err> = '
WARNING: Ignoring duplicate config node: filter (seeking filter)\n Found
duplicate PV FeScSs3Umv5wXtZCRvauf17sLaeQnS7e: using
/dev/mapper/eql-0-af1ff6-8865608d7-3c400636c28555dd_b not
/dev/mapper/eql-0-af1ff6-8865608d7-3c400636c28555dd_a\n Found duplicate PV
FeScSs3Umv5wXtZCRvauf17sLaeQnS7e: using
/dev/mapper/eql-0-af1ff6-8865608d7-3c400636c28555dd-ovirt-storage02 not
/dev/mapper/eql-0-af1ff6-8865608d7-3c400636c28555dd_b\n Found duplicate PV
hyyv4hWZiKT0UDdoDEyPZ5XrHc31hlTs: using
/dev/mapper/eql-0-af1ff6-3cb5608d7-c1a0063645b5559b_b not
/dev/mapper/eql-0-af1ff6-3cb5608d7-c1a0063645b5559b_a\n Found duplicate PV
hyyv4hWZiKT0UDdoDEyPZ5XrHc31hlTs: using
/dev/mapper/eql-0-af1ff6-3cb5608d7-c1a0063645b5559b-ovirt-storage01 not
/dev/mapper/eql-0-af1ff6-3cb5608d7-c1a0063645b5559b_b\n'; <rc> = 0
==
# rpm -qa |grep vdsm
vdsm-jsonrpc-4.16.14-0.el6.noarch
vdsm-xmlrpc-4.16.14-0.el6.noarch
vdsm-python-zombiereaper-4.16.14-0.el6.noarch
vdsm-python-4.16.14-0.el6.noarch
vdsm-cli-4.16.14-0.el6.noarch
vdsm-4.16.14-0.el6.x86_64
vdsm-yajsonrpc-4.16.14-0.el6.noarch
Thanks!
9 years, 6 months
How to backup/restore the rhevm-VM in hosted-engine ?
by xiec.fnst＠cn.fujitsu.com
--_000_EE4D679B9474414187D2E27D8B6890F6931BF6G08CNEXMBPEKD03g0_
Content-Type: text/plain; charset="gb2312"
Content-Transfer-Encoding: base64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--_000_EE4D679B9474414187D2E27D8B6890F6931BF6G08CNEXMBPEKD03g0_
Content-Type: text/html; charset="gb2312"
Content-Transfer-Encoding: quoted-printable
<html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr=
osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" =
xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:=
//www.w3.org/TR/REC-html40">
<head>
<meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dgb2312">
<meta name=3D"Generator" content=3D"Microsoft Word 14 (filtered medium)">
<style><!--
/* Font Definitions */
@font-face
{font-family:=CB=CE=CC=E5;
panose-1:2 1 6 0 3 1 1 1 1 1;}
@font-face
{font-family:"Cambria Math";
panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
@font-face
{font-family:"\@=CB=CE=CC=E5";
panose-1:2 1 6 0 3 1 1 1 1 1;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0cm;
margin-bottom:.0001pt;
text-align:justify;
text-justify:inter-ideograph;
font-size:10.5pt;
font-family:"Calibri","sans-serif";}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:purple;
text-decoration:underline;}
span.EmailStyle17
{mso-style-type:personal-compose;
font-family:"Calibri","sans-serif";
color:windowtext;}
.MsoChpDefault
{mso-style-type:export-only;
font-family:"Calibri","sans-serif";}
/* Page Definitions */
@page WordSection1
{size:612.0pt 792.0pt;
margin:72.0pt 90.0pt 72.0pt 90.0pt;}
div.WordSection1
{page:WordSection1;}
--></style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext=3D"edit" spidmax=3D"1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext=3D"edit">
<o:idmap v:ext=3D"edit" data=3D"1" />
</o:shapelayout></xml><![endif]-->
</head>
<body lang=3D"ZH-CN" link=3D"blue" vlink=3D"purple" style=3D"text-justify-t=
rim:punctuation">
<div class=3D"WordSection1">
<p class=3D"MsoNormal"><span lang=3D"EN-US">Hi,All<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-US"> &=
nbsp; As the mauual, I can=A1=AFt find anyway to backup/restore=
the rhevm-VM in the hosted-engine. The I just try to backup the storage of=
rhevm-VM (using cp =A8Cprf to make a copy of folder). Then I make so=
me change and
replace the origin RHEVM-VM content with my backup folder (of course I shu=
tdown the rhevm-vm first). At last the vm can be up,but the status is
<b>NOT</b> health but as below:<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-US"><o:p> </o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-US">=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-US">Status up-to-date &n=
bsp;  =
; : False<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-US">Hostname  =
; &n=
bsp; : 193.168.195.24=
8<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-US">Host ID =
&nb=
sp; : 1<o:p></o=
:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-US">Engine status =
&nb=
sp; : unknown stale-data<o:p></o:p></span></p=
>
<p class=3D"MsoNormal"><span lang=3D"EN-US">Score &n=
bsp;  =
; :=
2400<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-US">Local maintenance &n=
bsp;  =
; : False<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-US">Host timestamp  =
; &=
nbsp; : 1409743461<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-US">Extra metadata (valid at timest=
amp):<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-US"> &=
nbsp; metadata_parse_version=3D1<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-US"> &=
nbsp; metadata_feature_version=3D1<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-US"> &=
nbsp; timestamp=3D1409743461 (Wed Sep 3 07:24:21 2014)<o:=
p></o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-US"> &=
nbsp; host-id=3D1<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-US"> &=
nbsp; score=3D2400<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-US"> &=
nbsp; maintenance=3DFalse<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-US"> &=
nbsp; state=3DEngineUp<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-US"><o:p> </o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-US">=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D<o:p></o:p></span>=
</p>
<p class=3D"MsoNormal"><span lang=3D"EN-US"><o:p> </o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-US">So are there some proper way to=
backup the rhevm-vm?
<o:p></o:p></span></p>
</div>
</body>
</html>
--_000_EE4D679B9474414187D2E27D8B6890F6931BF6G08CNEXMBPEKD03g0_--
9 years, 6 months
Can not kill vm
by 肖力
------=_Part_337520_1095813983.1433898403897
Content-Type: text/plain; charset=GBK
Content-Transfer-Encoding: base64
SGkKSSBjYW4gbm90IGtpbGwgYnkgb1ZpcnQuCldoZW4gaSBwb3dlciBvZmYgdm0gYnkgb1ZpcnQg
d2ViICxJdCBpcyBmYWlsZWQuCkFuZCBpIHVzZSB2aXJzaCBkZXN0cm95IHZtLCBmYWlsZWQgdG9v
LGFuZCBoYXZlIGxpc3QgaW5mbzoKZXJyb3I6IEZhaWxlZCB0byBkZXN0cm95IGRvbWFpbiAxCmVy
cm9yOiBvcGVyYXRpb24gZmFpbGVkOiBmYWlsZWQgdG8ga2lsbCBxZW11IHByb2Nlc3Mgd2l0aCBT
SUdURVJNCldoYXQgY2FuIGkgZG8sdGhzIQo=
------=_Part_337520_1095813983.1433898403897
Content-Type: text/html; charset=GBK
Content-Transfer-Encoding: base64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------=_Part_337520_1095813983.1433898403897--
9 years, 6 months
LDAP bind DN generation problem
by Mitja Mihelič
This is a multi-part message in MIME format.
--------------040506020505040804040504
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Transfer-Encoding: 8bit
Hi!
We just upgaded oVirt from 3.4 to 3.5 and now users cannot select the
LDAP domain on the login screen. Only internal is available.
Our LDAP server is actually a 389DS instance and we are using for
authentication in oVirt without Kerberos. The existing setup has worked
since the days of 3.2.
When we try to validate the domain, we get
[root@brda ~]# engine-manage-domains validate
Error: Cannot authenticate user ovirt to domain guest.arnes.si, details:
[LDAP: error code 32 - No Such Object]; nested exception is
javax.naming.AuthenticationException: [LDAP: error code 32 - No Such Object]
Failure while testing domain guest.arnes.si. Details: Cannot
authenticate user to LDAP server.
The LDAP log reports
[18/Jun/2015:13:52:38 +0200] conn=3 op=0 BIND
dn="uid=ovirt,ou=Peopledc=guest,dc=arnes,dc=si" method=128 version=3
As you can see there is a comma missing before "dc=guest,dc=arnes,dc=si".
Before the upgrade the bind DN was generated properly as
[18/Jun/2015:12:42:45 +0200] conn=10219 op=0 BIND
dn="uid=ovirt,ou=People,dc=arnes,dc=si" method=128 version=3
This looks like a bug.
Is there a quick fix we can do to fix this typo?
We are also interested in knowing what is the correct way in 3.5 to add
a domain that uses an LDAP server for its authentication source without
Kerberos.
Kind regards, Mitja
--
--
Mitja Mihelič
ARNES, Tehnološki park 18, p.p. 7, SI-1001 Ljubljana, Slovenia
tel: +386 1 479 8800, fax: +386 1 479 88 99
--------------040506020505040804040504
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: 8bit
<html>
<head>
<meta http-equiv="content-type" content="text/html; charset=utf-8">
</head>
<body bgcolor="#FFFFFF" text="#000000">
<font size="-1">Hi!<br>
<br>
We just upgaded oVirt from 3.4 to 3.5 and now users cannot select
the LDAP domain on the login screen. Only internal is available.<br>
Our LDAP server is actually a 389DS instance and we are using for
authentication in oVirt without Kerberos. The existing setup has
worked since the days of 3.2.<br>
<br>
When we try to validate the domain, we get<br>
[root@brda ~]# engine-manage-domains validate<br>
Error: Cannot authenticate user ovirt to domain guest.arnes.si,
details: [LDAP: error code 32 - No Such Object]; nested exception
is javax.naming.AuthenticationException: [LDAP: error code 32 - No
Such Object]<br>
Failure while testing domain guest.arnes.si. Details: Cannot
authenticate user to LDAP server.<br>
<br>
The LDAP log reports<br>
[18/Jun/2015:13:52:38 +0200] conn=3 op=0 BIND
dn="uid=ovirt,ou=Peopledc=guest,dc=arnes,dc=si" method=128
version=3<br>
As you can see there is a comma missing before
"dc=guest,dc=arnes,dc=si".<br>
<br>
Before the upgrade the bind DN was generated properly as<br>
[18/Jun/2015:12:42:45 +0200] conn=10219 op=0 BIND
dn="uid=ovirt,ou=People,dc=arnes,dc=si" method=128 version=3<br>
<br>
This looks like a bug.<br>
Is there a quick fix we can do to fix this typo?<br>
<br>
We are also interested in knowing what is the correct way in 3.5
to add a domain that uses an LDAP server for its authentication
source without Kerberos.<br>
<br>
Kind regards, Mitja<br>
</font>
<pre class="moz-signature" cols="72">
--
--
Mitja Mihelič
ARNES, Tehnološki park 18, p.p. 7, SI-1001 Ljubljana, Slovenia
tel: +386 1 479 8800, fax: +386 1 479 88 99</pre>
</body>
</html>
--------------040506020505040804040504--
9 years, 6 months
ovirt-shell : which default start mode?
by Nicolas Ecarnot
Hi,
Since long, I'm using some scripts to create VM, add some components and
start them. My script is booting them in PXE.
After an upgrade in 3.5.1, I'm witnessing that the default boot is now
primarily using hard disk, and not PXE.
Is there a way for the ovirt-shell to ask a boot via PXE?
In fact, I find that the embeded inline help of ovirt-shell is difficult
to read, and some *tree view* of all options would be much better readable.
--
Nicolas ECARNOT
9 years, 6 months
Error while executing action Setup Networks: Could not connect to peer host
by Roman Nikolayevich Drovalev
Ýòî ñîîáùåíèå èç íåñêîëüêèõ ÷àñòåé â ôîðìàòå MIME.
--=_alternative 002C0A6E43257E69_=
Content-Type: text/plain; charset="KOI8-R"
Content-Transfer-Encoding: base64
QWxsIHRoYW5rcywgYWZ0ZXIgcGx1cmFsICJkZWwgaG9zdCIgLSAiYWRkIGhvc3RfIC0gIGJlY2Ft
ZSBhbGwgz8shDQoNCg0K
--=_alternative 002C0A6E43257E69_=
Content-Type: text/html; charset="KOI8-R"
Content-Transfer-Encoding: base64
PGZvbnQgc2l6ZT0zIGZhY2U9IlNlZ29lIFVJIj5BbGwgdGhhbmtzLCBhZnRlciBwbHVyYWwgJnF1
b3Q7ZGVsIGhvc3QmcXVvdDsNCi0gJnF1b3Q7YWRkIGhvc3RfIC0gJm5ic3A7YmVjYW1lIGFsbCDP
yyE8L2ZvbnQ+DQo8YnI+PGZvbnQgc2l6ZT0yIGZhY2U9InNhbnMtc2VyaWYiPjxicj4NCjwvZm9u
dD4NCg==
--=_alternative 002C0A6E43257E69_=--
9 years, 6 months
Block size?
by Roman Nikolayevich Drovalev
Ýòî ñîîáùåíèå èç íåñêîëüêèõ ÷àñòåé â ôîðìàòå MIME.
--=_alternative 002F395043257E66_=
Content-Type: text/plain; charset="US-ASCII"
Hello,
Tell please, what size of the block to me set on the Storage for the
greatest productivity oVirt?
512K, 256K, 128K, 64K, 8K or 4K ?
Drovalev Roman
--=_alternative 002F395043257E66_=
Content-Type: text/html; charset="US-ASCII"
<font size=1 face="Segoe UI">Hello,</font>
<br>
<br><font size=1 face="Segoe UI">Tell please, what size of the block to
me set on the Storage for the greatest productivity oVirt?</font>
<br>
<br><font size=2 face="sans-serif">512K, 256K, 128K, 64K, 8K or 4K ? </font>
<br><font size=2 face="sans-serif"><br>
Drovalev Roman</font>
--=_alternative 002F395043257E66_=--
9 years, 6 months
Error while executing action Setup Networks: Could not connect to peer host
by Roman Nikolayevich Drovalev
Ýòî ñîîáùåíèå èç íåñêîëüêèõ ÷àñòåé â ôîðìàòå MIME.
--=_alternative 001C7F4143257E69_=
Content-Type: text/plain; charset="US-ASCII"
My network iface:
#cat ifcfg-eno1
HWADDR="*;*;*;*;*;*"
DEVICE=eno1
BRIDGE=ovirtmgmt
ONBOOT=yes
IPV6INIT=no
MTU=1500
NM_CONTROLLED=no
#cat ifcfg-ovirtmgmt
DEVICE=ovirtmgmt
TYPE=Bridge
DELAY=0
STP=off
ONBOOT=yes
IPADDR=192.168.8.31
NETMASK=255.255.255.0
GATEWAY=192.168.8.1
BOOTPROTO=none
MTU=1500
DEFROUTE=yes
NM_CONTROLLED=no
HOTPLUG=no
BUT, my host writes the error and it is not added in Cluster!
How correctly to add a host, or to make network interfaces?
--=_alternative 001C7F4143257E69_=
Content-Type: text/html; charset="US-ASCII"
<font size=3 face="sans-serif">My network iface:</font>
<br>
<br><font size=2 face="sans-serif"><b>#cat ifcfg-eno1</b></font>
<br><font size=2 face="sans-serif">HWADDR="*;*;*;*;*;*"</font>
<br><font size=2 face="sans-serif">DEVICE=eno1</font>
<br><font size=2 face="sans-serif">BRIDGE=ovirtmgmt</font>
<br><font size=2 face="sans-serif">ONBOOT=yes</font>
<br><font size=2 face="sans-serif">IPV6INIT=no</font>
<br><font size=2 face="sans-serif">MTU=1500</font>
<br><font size=2 face="sans-serif">NM_CONTROLLED=no</font>
<br>
<br><font size=2 face="sans-serif"><b>#cat ifcfg-ovirtmgmt</b></font>
<br><font size=2 face="sans-serif">DEVICE=ovirtmgmt</font>
<br><font size=2 face="sans-serif">TYPE=Bridge</font>
<br><font size=2 face="sans-serif">DELAY=0</font>
<br><font size=2 face="sans-serif">STP=off</font>
<br><font size=2 face="sans-serif">ONBOOT=yes</font>
<br><font size=2 face="sans-serif">IPADDR=192.168.8.31</font>
<br><font size=2 face="sans-serif">NETMASK=255.255.255.0</font>
<br><font size=2 face="sans-serif">GATEWAY=192.168.8.1</font>
<br><font size=2 face="sans-serif">BOOTPROTO=none</font>
<br><font size=2 face="sans-serif">MTU=1500</font>
<br><font size=2 face="sans-serif">DEFROUTE=yes</font>
<br><font size=2 face="sans-serif">NM_CONTROLLED=no</font>
<br><font size=2 face="sans-serif">HOTPLUG=no</font>
<br>
<br><font size=3 face="sans-serif">BUT, my host </font><font size=3 face="Segoe UI">writes
the error and it is not added in Cluster! </font>
<br>
<br><font size=3 face="Segoe UI">How correctly to add a host, or to make
network interfaces?</font>
--=_alternative 001C7F4143257E69_=--
9 years, 6 months
