Network Address Change
by Paul.LKW
Hi All:
I just has a case, I need to change the oVirt host and engine IP address
due to data center decommission I checked in the hosted-engine host
there are some files I could change ;
in ovirt-hosted-engine/hosted-engine.conf
ca_subject="O=simple.com, CN=1.2.3.4"
gateway=1.2.3.254
and of course I need to change the ovirtmgmt interface IP too, I think
just change the above line could do the tick, but where could I change
the other host IP in the cluster ?
I think I have to be lost all the host as once changed the hosted-engine
host IP as it is in diff. sub net.
Does there any command line tools could do that or someone has such
experience could share?
Best Regards,
Paul.LKW
2 years, 4 months
OVS switch type for hosted-engine
by Devin A. Bougie
Is it possible to setup a hosted engine using the OVS switch type instead of Legacy? If it's not possible to start out as OVS, instructions for switching from Legacy to OVS after the fact would be greatly appreciated.
Many thanks,
Devin
2 years, 12 months
USB3 redirection
by Rik Theys
Hi,
I'm trying to assign a USB3 controller to a CentOS 7.4 VM in oVirt 4.1
with USB redirection enabled.
I've created the following file in /etc/ovirt-engine/osinfo.conf.d:
01-usb.properties with content
os.other.devices.usb.controller.value = nec-xhci
and have restarted ovirt-engine.
If I disable USB-support in the web interface for the VM, the xhci
controller is added to the VM (I can see it in the qemu-kvm
commandline), but usb redirection is not available.
If I enable USB-support in the UI, no xhci controller is added (only 4
uhci controllers).
Is there a way to make the controllers for usb redirection xhci controllers?
Regards,
Rik
--
Rik Theys
System Engineer
KU Leuven - Dept. Elektrotechniek (ESAT)
Kasteelpark Arenberg 10 bus 2440 - B-3001 Leuven-Heverlee
+32(0)16/32.11.07
----------------------------------------------------------------
<<Any errors in spelling, tact or fact are transmission errors>>
3 years
OVN routing and firewalling in oVirt
by Gianluca Cecchi
Hello,
how do we manage routing between different OVN networks in oVirt?
And between OVN networks and physical ones?
Based on architecture read here:
http://openvswitch.org/support/dist-docs/ovn-architecture.7.html
I see terms for logical routers and gateway routers respectively but how to
apply to oVirt configuration?
Do I have to choose between setting up a specialized VM or a physical one:
is it applicable/advisable to put on oVirt host itself the gateway
functionality?
Is there any security policy (like security groups in Openstack) to
implement?
Thanks,
Gianluca
3 years
OVN and change of mgmt network
by Gianluca Cecchi
Hello,
I previously had OVN running on engine (as OVN provider with northd and
northbound and southbound DBs) and hosts (with OVN controller).
After changing mgmt ip of hosts (engine has retained instead the same ip),
I executed again on them the command:
vdsm-tool ovn-config <ip_of_engine> <nel_local_ip_of_host>
Now I think I have to clean up some things, eg:
1) On engine
where I get these lines below
systemctl status ovn-northd.service -l
. . .
Sep 29 14:41:42 ovmgr1 ovsdb-server[940]: ovs|00005|reconnect|ERR|tcp:
10.4.167.40:37272: no response to inactivity probe after 5 seconds,
disconnecting
Oct 03 11:52:00 ovmgr1 ovsdb-server[940]: ovs|00006|reconnect|ERR|tcp:
10.4.167.41:52078: no response to inactivity probe after 5 seconds,
disconnecting
The two IPs are the old ones of two hosts
It seems that a restart of the services has fixed...
Can anyone confirm if I have to do anything else?
2) On hosts (there are 3 hosts with OVN on ip 10.4.192.32/33/34)
where I currently have this output
[root@ov301 ~]# ovs-vsctl show
3a38c5bb-0abf-493d-a2e6-345af8aedfe3
Bridge br-int
fail_mode: secure
Port "ovn-1dce5b-0"
Interface "ovn-1dce5b-0"
type: geneve
options: {csum="true", key=flow, remote_ip="10.4.192.32"}
Port "ovn-ddecf0-0"
Interface "ovn-ddecf0-0"
type: geneve
options: {csum="true", key=flow, remote_ip="10.4.192.33"}
Port "ovn-fd413b-0"
Interface "ovn-fd413b-0"
type: geneve
options: {csum="true", key=flow, remote_ip="10.4.168.74"}
Port br-int
Interface br-int
type: internal
ovs_version: "2.7.2"
[root@ov301 ~]#
The IPs of kind 10.4.192.x are ok.
But there is a left-over of an old host I initially used for tests,
corresponding to 10.4.168.74, that now doesn't exist anymore
How can I clean records for 1) and 2)?
Thanks,
Gianluca
4 years, 3 months
deprecating export domain?
by Charles Kozler
Hello,
I recently read on this list from a redhat member that export domain is
either being deprecated or looking at being deprecated
To that end, can you share details? Can you share any notes/postings/bz's
that document this? I would imagine something like this would be discussed
in larger audience
This seems like a somewhat significant change to make and I am curious
where this is scheduled? Currently, a lot of my backups rely explicitly on
an export domain for online snapshots, so I'd like to plan accordingly
Thanks!
4 years, 8 months
Vm suddenly paused with error "vm has paused due to unknown storage error"
by Jasper Siero
Hi all,
Since we upgraded our Ovirt nodes to CentOS 7 a vm (not a specific one but never more then one) will sometimes pause suddenly with the error "VM ... has paused due to unknown storage error". It happens now two times in a month.
The Ovirt node uses san storage for the vm's running on it. When a specific vm is pausing with an error the other vm's keeps running without problems.
The vm runs without problems after unpausing it.
Versions:
CentOS Linux release 7.1.1503
vdsm-4.14.17-0
libvirt-daemon-1.2.8-16
vdsm.log:
VM Channels Listener::DEBUG::2015-10-25 07:43:54,382::vmChannels::95::vds::(_handle_timeouts) Timeout on fileno 78.
libvirtEventLoop::INFO::2015-10-25 07:43:56,177::vm::4602::vm.Vm::(_onIOError) vmId=`77f07ae0-cc3e-4ae2-90ec-7fba7b11deeb`::abnormal vm stop device virtio-disk0 error eother
libvirtEventLoop::DEBUG::2015-10-25 07:43:56,178::vm::5204::vm.Vm::(_onLibvirtLifecycleEvent) vmId=`77f07ae0-cc3e-4ae2-90ec-7fba7b11deeb`::event Suspended detail 2 opaque None
libvirtEventLoop::INFO::2015-10-25 07:43:56,178::vm::4602::vm.Vm::(_onIOError) vmId=`77f07ae0-cc3e-4ae2-90ec-7fba7b11deeb`::abnormal vm stop device virtio-disk0 error eother
...........
libvirtEventLoop::INFO::2015-10-25 07:43:56,180::vm::4602::vm.Vm::(_onIOError) vmId=`77f07ae0-cc3e-4ae2-90ec-7fba7b11deeb`::abnormal vm stop device virtio-disk0 error eother
specific error part in libvirt vm log:
block I/O error in device 'drive-virtio-disk0': Unknown error 32758 (32758)
...........
block I/O error in device 'drive-virtio-disk0': Unknown error 32758 (32758)
engine.log:
2015-10-25 07:44:48,945 INFO [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (DefaultQuartzScheduler_Worker-40) [a43dcc8] VM diataal-prod-cas1 77f07ae0-cc3e-4ae2-90ec-7fba7b11deeb moved from
Up --> Paused
2015-10-25 07:44:49,003 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler_Worker-40) [a43dcc8] Correlation ID: null, Call Stack: null, Custom Event
ID: -1, Message: VM diataal-prod-cas1 has paused due to unknown storage error.
Has anyone experienced the same problem or knows a way to solve this?
Kind regards,
Jasper
5 years, 2 months
Unable to find OVF_STORE after recovery / upgrade
by Sam Cappello
This is a multi-part message in MIME format.
--------------05F3D0780062C6D37C1619A7
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Transfer-Encoding: 7bit
Hi,
so i was running a 3.4 hosted engine two node setup on centos 6, had
some disk issues so i tried to upgrade to centos 7 and follow the path
3.4 > 3.5 > 3.6 > 4.0. i screwed up dig time somewhere between 3.6 and
4.0, so i wiped the drives, installed a fresh 4.0.3, then created the
database and restored the 3.6 engine backup before running engine-setup
as per the docs. things seemed to work, but i have the the following
issues / symptoms:
- ovirt-ha-agent running 100% CPU on both nodes
- messages in the UI that the Hosted Engine storage Domain isn't active
and Failed to import the Hosted Engine Storage Domain
- hosted engine is not visible in the UI
and the following repeating in the agent.log:
MainThread::INFO::2016-10-03
12:38:27,718::hosted_engine::461::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(start_monitoring)
Current state EngineUp (score: 3400)
MainThread::INFO::2016-10-03
12:38:27,720::hosted_engine::466::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(start_monitoring)
Best remote host vmhost1.oracool.net (id: 1, score: 3400)
MainThread::INFO::2016-10-03
12:38:37,979::states::421::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(consume)
Engine vm running on localhost
MainThread::INFO::2016-10-03
12:38:37,985::hosted_engine::612::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_vdsm)
Initializing VDSM
MainThread::INFO::2016-10-03
12:38:45,645::hosted_engine::639::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images)
Connecting the storage
MainThread::INFO::2016-10-03
12:38:45,647::storage_server::219::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server)
Connecting storage server
MainThread::INFO::2016-10-03
12:39:00,543::storage_server::226::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server)
Connecting storage server
MainThread::INFO::2016-10-03
12:39:00,562::storage_server::233::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server)
Refreshing the storage domain
MainThread::INFO::2016-10-03
12:39:01,235::hosted_engine::666::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images)
Preparing images
MainThread::INFO::2016-10-03
12:39:01,236::image::126::ovirt_hosted_engine_ha.lib.image.Image::(prepare_images)
Preparing images
MainThread::INFO::2016-10-03
12:39:09,295::hosted_engine::669::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images)
Reloading vm.conf from the shared storage domain
MainThread::INFO::2016-10-03
12:39:09,296::config::206::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine.config::(refresh_local_conf_file)
Trying to get a fresher copy of vm configuration from the OVF_STORE
MainThread::WARNING::2016-10-03
12:39:16,928::ovf_store::107::ovirt_hosted_engine_ha.lib.ovf.ovf_store.OVFStore::(scan)
Unable to find OVF_STORE
MainThread::ERROR::2016-10-03
12:39:16,934::config::235::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine.config::(refresh_local_conf_file)
Unable to get vm.conf from OVF_STORE, falling back to initial vm.conf
I have searched a bit and not really found a solution, and have come to
the conclusion that i have made a mess of things, and am wondering if
the best solution is to export the VMs, and reinstall everything then
import them back?
i am using remote NFS storage.
if i try and add the hosted engine storage domain it says it is already
registered.
i have also upgraded and am now running oVirt Engine Version:
4.0.4.4-1.el7.centos
hosts were installed using ovirt-node. currently at
3.10.0-327.28.3.el7.x86_64
if a fresh install is best, any advice / pointer to doc that explains
best way to do this?
i have not moved my most important server over to this cluster yet so i
can take some downtime to reinstall.
thanks!
sam
--------------05F3D0780062C6D37C1619A7
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: 8bit
<html>
<head>
<meta http-equiv="content-type" content="text/html; charset=utf-8">
</head>
<body bgcolor="#FFFFFF" text="#000000">
Hi,<br>
so i was running a 3.4 hosted engine two node setup on centos 6, had
some disk issues so i tried to upgrade to centos 7 and follow the
path 3.4 > 3.5 > 3.6 > 4.0. i screwed up dig time
somewhere between 3.6 and 4.0, so i wiped the drives, installed a
fresh 4.0.3, then created the database and restored the 3.6 engine
backup before running engine-setup as per the docs. things seemed
to work, but i have the the following issues / symptoms:<br>
- ovirt-ha-agent running 100% CPU on both nodes<br>
- messages in the UI that the Hosted Engine storage Domain isn't
active and Failed to import the Hosted Engine Storage Domain<br>
- hosted engine is not visible in the UI<br>
and the following repeating in the agent.log:<br>
<br>
MainThread::INFO::2016-10-03
12:38:27,718::hosted_engine::461::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(start_monitoring)
Current state EngineUp (score: 3400)<br>
MainThread::INFO::2016-10-03
12:38:27,720::hosted_engine::466::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(start_monitoring)
Best remote host vmhost1.oracool.net (id: 1, score: 3400)<br>
MainThread::INFO::2016-10-03
12:38:37,979::states::421::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(consume)
Engine vm running on localhost<br>
MainThread::INFO::2016-10-03
12:38:37,985::hosted_engine::612::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_vdsm)
Initializing VDSM<br>
MainThread::INFO::2016-10-03
12:38:45,645::hosted_engine::639::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images)
Connecting the storage<br>
MainThread::INFO::2016-10-03
12:38:45,647::storage_server::219::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server)
Connecting storage server<br>
MainThread::INFO::2016-10-03
12:39:00,543::storage_server::226::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server)
Connecting storage server<br>
MainThread::INFO::2016-10-03
12:39:00,562::storage_server::233::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server)
Refreshing the storage domain<br>
MainThread::INFO::2016-10-03
12:39:01,235::hosted_engine::666::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images)
Preparing images<br>
MainThread::INFO::2016-10-03
12:39:01,236::image::126::ovirt_hosted_engine_ha.lib.image.Image::(prepare_images)
Preparing images<br>
MainThread::INFO::2016-10-03
12:39:09,295::hosted_engine::669::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images)
Reloading vm.conf from the shared storage domain<br>
MainThread::INFO::2016-10-03
12:39:09,296::config::206::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine.config::(refresh_local_conf_file)
Trying to get a fresher copy of vm configuration from the OVF_STORE<br>
MainThread::WARNING::2016-10-03
12:39:16,928::ovf_store::107::ovirt_hosted_engine_ha.lib.ovf.ovf_store.OVFStore::(scan)
Unable to find OVF_STORE<br>
MainThread::ERROR::2016-10-03
12:39:16,934::config::235::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine.config::(refresh_local_conf_file)
Unable to get vm.conf from OVF_STORE, falling back to initial
vm.conf<br>
<br>
I have searched a bit and not really found a solution, and have come
to the conclusion that i have made a mess of things, and am
wondering if the best solution is to export the VMs, and reinstall
everything then import them back?<br>
i am using remote NFS storage.<br>
if i try and add the hosted engine storage domain it says it is
already registered.<br>
i have also upgraded and am now running <span
class="gwt-InlineLabel">oVirt Engine Version: 4.0.4.4-1.el7.centos<br>
hosts were installed using ovirt-node. currently at
3.10.0-327.28.3.el7.x86_64<br>
if a fresh install is best, any advice / pointer to doc that
explains best way to do this?<br>
i have not moved my most important server over to this cluster yet
so i can take some downtime to reinstall.<br>
thanks!<br>
sam<br>
<br>
</span><br>
</body>
</html>
--------------05F3D0780062C6D37C1619A7--
5 years, 11 months
[Users] Problem Creating "oVirtEngine" Machine
by Richie＠HIP
--Apple-Mail=_DF4BF6D1-1F87-4F60-9CF9-070D4D836241
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain;
charset=windows-1252
I can't agree with you more. Modifying every box's or Virtual Machine's =
HOSTS file with a FQDN and IP SHOULD work, but in my case it is not. =
There are several reasons I've come to believe could be the problem =
during my trial-and-errors testing and learning.
FIRST - MACHINE IPs.
THe machine's "Names" where not appearing in the Microsoft Active =
Directory DHCP along with their assigned IPs; in other words, the DHCP =
just showed an "Assigned IP", equal to the Linux Machine's IP, with a =
<empty> ('i.e. blank, none, silch, plan old "no-letters-or-numbers") =
"Name" in the "Name" (i.e. machines "network name", or FQDN-value used =
by the Windows AD DNS-service) column. =20
if your IP is is appearing with an <empty> "name", there is no "host =
name" to associate the IP, it makes it difficult to define a FQDN; which =
isn't that useful if we're going to use the HOSTS files in all =
participating machines in an oVirt Installation.
I kept banging my head for three (3) long hours trying to find the =
problem.
In Fedora 18, I could't find where the "network name" of the machine =
could be defined. =20
I tried putting the "Additional Search Domains" and/or "DHCP Client ID" =
in Fedora's 18 Desktop - under "System Settings > Hardware > Network > =
Options > IPv4 Setting"
The DHCP went crazy; showing an "Aberrant-MAC-Address" (i.e. a really =
long-sting value where the machine's MAC address should be), and we knew =
the MAC address as we obtained using "ifconfig" on the machine getting =
it's IP from the DHCP. So we reverted these entries from the =
aforementioned, rebooted, and got an assigned IP, with proper MAC =
address, but still no "Name"
Kept wondering around the "Settings" and seeing which one made sense, =
but what the heck, I went for it. =20
Under "System Settings > System > Details" I found the information about =
GNOME and the machine's hardware. =20
There was a field for "Device Name" that originally had =
"localhost.localdomain"; I changed the value to "ovirtmanager". and =
under "Graphic" changed to "Forced Fallback Mode" to "ON". =20
I also installed all Kerberos libraries and client (i.e. authconfig-gtk, =
authhub, authhub-client, krb5-apple-clents, krb5-auth-dialog, =
krb5-workstation, pam-kcoda, pam-krb5, root-net.krb5) and rebooted
VOILA=85!!! =20
I don;t know if it was the definition of "Device Name" from =
"localhost.localdomain" to "ovirtengine", of the Kerberos libraries =
install, or both. But finally the MS AD DHCP was showing the =
Addigned-IP, the machine "Name" and the proper MAC-address. Regardless, =
setting the machine's "Network Name" under "System Settings > System > =
Details > Device Name", with no explanation of what "Device Name" meant =
or was used for, was the last place I would have imagined this network =
setting could be defined.
NOTE - Somebody has to try the two steps I did together, separately. to =
see which one is the real problem-solver; for me it is working, and "if =
it ain't broke, don't fix it=85"
Now that I have the DHCP / IP thing sorted, I have to do the DNS stuff.
To this point, I've addressed the DHCP and "Network Name" of the =
IP-Lease (required for the DNS to work). This still does't completely =
explain why, by modifying the HOSTS file (allowing be to set and IP and =
non-DNS FQDN). allows me to install the oVirtEngine "as long as I do not =
use default HTTPd service parameters as suggested by the install". By =
using the HOST file to "define" FQDNs, AND NOT using the default HTTPd =
suggested changes, I'm able to install the oVirtEngine (given that I use =
ports 8700 and 8701) to access the "oVirtEngine Welcome Screen", BUT =
NONE of the "oVirt Portals" work=85 YET=85!!!
More to come during the week
Richie
Jos=E9 E ("Richie") Piovanetti, MD, MS=20
M: 787-615-4884 | richiepiovanetti(a)healthcareinfopartners.com
On Aug 2, 2013, at 3:10 AM, Joop <jvdwege(a)xs4all.nl> wrote:
> Hello Ritchie,
>=20
>> In a conversation via IRC, someone suggested that I activate =
"dnsmask" to overcome what appears to be a DNS problem. I'll try that =
other possibility once I get home later today.
>>=20
>> In the mean time, what do you mean by "fixing the hostname"=85? I =
opened and fixed the HOSTNAMES and changed it from =
"localhost-localdomain" to "localhost.localdomain" and that made no =
difference. Albeit, after changing I didm;t restart, remove ovirtEngine =
((using "engine-cleanup") and reinstalled via "engine-setup". Is that =
what you mean=85?
>>=20
>>=20
>>=20
>> In the mean time, the fact that even if I resolve the issue of =
oVirtEngine I will not be able to connect to the oVirt Nodes unless I =
have DNS resolution, apparently means I should do something with =
resolving via DNS in my home LAN (i.e implement some sort of "DNS Cache" =
so I can resolve my home computers via DNS inside my LAN).
>>=20
>> Any suggestions are MORE THAN WELCOME=85!!!
>> =20
>=20
> Having setup ovirt more than I can count right now I share your =
feeling that it isn't always clear why things are going wrong, but in =
this case I suspect that there is a rather small thing missing.
> In short if you setup ovirt-engine, either using virtualbox or on real =
hardware, and you give your host a meaningfull name AND you add that =
info also in your /etc/hosts file than things SHOULD work, no need for =
dnsmasq or even bind. Would make things easier once you start adding =
virt hosts to you infrastructure since you will need to duplicate these =
actions on each host (add engine name/ip to each host and add each host =
to the others and all hosts to engine)
>=20
> Just ask if you need more assistance and I will write down a small =
howto that should work out of the box else I might have some time to see =
if I can get things going.
>=20
> Regards,
>=20
> Joop
>=20
--Apple-Mail=_DF4BF6D1-1F87-4F60-9CF9-070D4D836241
Content-Transfer-Encoding: quoted-printable
Content-Type: text/html;
charset=windows-1252
<html><head><meta http-equiv=3D"Content-Type" content=3D"text/html =
charset=3Dwindows-1252"></head><body style=3D"word-wrap: break-word; =
-webkit-nbsp-mode: space; -webkit-line-break: after-white-space; ">I =
can't agree with you more. Modifying every box's or Virtual =
Machine's HOSTS file with a FQDN and IP SHOULD work, but in my case it =
is not. There are several reasons I've come to believe could be =
the problem during my trial-and-errors testing and =
learning.<div><div><br></div><div>FIRST - MACHINE IPs.</div><ul =
class=3D"MailOutline"><li>THe machine's "Names" where not appearing in =
the <b>Microsoft Active Directory DHCP</b> along with their assigned =
IPs; in other words, the DHCP just showed an "Assigned IP", equal to the =
Linux Machine's IP, with a <empty> ('i.e. blank, none, silch, plan =
old "no-letters-or-numbers") "Name" in the "Name" (i.e. machines =
"network name", or FQDN-value used by the Windows AD DNS-service) =
column. </li><li>if your IP is is appearing with an <empty> =
"name", there is no "host name" to associate the IP, it makes it =
difficult to define a FQDN; which isn't that useful if we're going to =
use the HOSTS files in all participating machines in an oVirt =
Installation.</li><li>I kept banging my head for three (3) long hours =
trying to find the problem.</li><ul><li>In Fedora 18, I could't find =
where the "network name" of the machine could be defined. =
</li><li>I tried putting the "Additional Search Domains" and/or =
"DHCP Client ID" in Fedora's 18 Desktop - under "System Settings > =
Hardware > Network > Options > IPv4 Setting"</li><ul><li>The =
DHCP went crazy; showing an "Aberrant-MAC-Address" (i.e. a really =
long-sting value where the machine's MAC address should be), and we knew =
the MAC address as we obtained using "ifconfig" on the machine getting =
it's IP from the DHCP. So we reverted these entries from the =
aforementioned, rebooted, and got an assigned IP, with proper MAC =
address, but still no "Name"</li></ul><li>Kept wondering around the =
"Settings" and seeing which one made sense, but what the heck, I went =
for it. </li><ul><li>Under "System Settings > System > =
Details" I found the information about GNOME and the machine's hardware. =
</li><li>There was a field for "Device Name" that originally had =
"localhost.localdomain"; I changed the value to "ovirtmanager". and =
under "Graphic" changed to "Forced Fallback Mode" to "ON". =
</li><li>I also installed all Kerberos libraries and client (i.e. =
authconfig-gtk, authhub, authhub-client, krb5-apple-clents, =
krb5-auth-dialog, krb5-workstation, pam-kcoda, pam-krb5, root-net.krb5) =
and rebooted</li><li>VOILA=85!!! </li></ul><li>I don;t know if it =
was the definition of "Device Name" from "localhost.localdomain" to =
"ovirtengine", of the Kerberos libraries install, or both. But =
finally the MS AD DHCP was showing the Addigned-IP, the machine "Name" =
and the proper MAC-address. Regardless, setting the machine's =
"Network Name" under "System Settings > System > Details =
> Device Name", with no explanation of what "Device Name" meant =
or was used for, was the last place I would have imagined this =
network setting could be defined.</li><li><b>NOTE</b> - Somebody has to =
try the two steps I did together, separately. to see which one is the =
real problem-solver; for me it is working, and "if it ain't broke, don't =
fix it=85"</li></ul></ul><div><br =
class=3D"webkit-block-placeholder"></div><div>Now that I have the DHCP / =
IP thing sorted, I have to do the DNS stuff.</div><div><br></div><div>To =
this point, I've addressed the DHCP and "Network Name" of the IP-Lease =
(required for the DNS to work). This still does't completely =
explain why, by modifying the HOSTS file (allowing be to set and IP and =
non-DNS FQDN). allows me to install the oVirtEngine "<b><i>as long as I =
do not use default HTTPd service parameters as suggested by the =
install</i></b>". <b>By using the HOST file to "define" FQDNs, AND =
NOT using the default HTTPd suggested changes, I'm able to install the =
oVirtEngine (given that I use ports 8700 and 8701) to access the =
"oVirtEngine Welcome Screen", BUT NONE of the "oVirt Portals" work</b>=85 =
YET=85!!!</div><div><br></div><div>More to come during the =
week</div><div><br></div><div>Richie</div><div =
apple-content-edited=3D"true"><br>Jos=E9 E ("Richie") Piovanetti, MD, =
MS <br>M: 787-615-4884 | <a =
href=3D"mailto:richiepiovanetti@healthcareinfopartners.com">richiepiovanet=
ti(a)healthcareinfopartners.com</a><br><br><br><br><br><br></div><br><div><d=
iv>On Aug 2, 2013, at 3:10 AM, Joop <<a =
href=3D"mailto:jvdwege@xs4all.nl">jvdwege(a)xs4all.nl</a>> =
wrote:</div><br class=3D"Apple-interchange-newline"><blockquote =
type=3D"cite">Hello Ritchie,<br><br><blockquote type=3D"cite">In a =
conversation via IRC, someone suggested that I activate "dnsmask" to =
overcome what appears to be a DNS problem. I'll try that other =
possibility once I get home later today.<br><br>In the mean time, what =
do you mean by "fixing the hostname"=85? I opened and fixed the =
HOSTNAMES and changed it from "localhost-localdomain" to =
"localhost.localdomain" and that made no difference. Albeit, after =
changing I didm;t restart, remove ovirtEngine ((using "engine-cleanup") =
and reinstalled via "engine-setup". Is that what you =
mean=85?<br><br><br><br>In the mean time, the fact that even if I =
resolve the issue of oVirtEngine I will not be able to connect to the =
oVirt Nodes unless I have DNS resolution, apparently means I should do =
something with resolving via DNS in my home LAN (i.e implement some sort =
of "DNS Cache" so I can resolve my home computers via DNS inside my =
LAN).<br><br>Any suggestions are MORE THAN WELCOME=85!!!<br> =
<br></blockquote><br>Having setup ovirt more than I can count =
right now I share your feeling that it isn't always clear why things are =
going wrong, but in this case I suspect that there is a rather small =
thing missing.<br>In short if you setup ovirt-engine, either using =
virtualbox or on real hardware, and you give your host a meaningfull =
name AND you add that info also in your /etc/hosts file than things =
SHOULD work, no need for dnsmasq or even bind. Would make things easier =
once you start adding virt hosts to you infrastructure since you will =
need to duplicate these actions on each host (add engine name/ip to each =
host and add each host to the others and all hosts to =
engine)<br><br>Just ask if you need more assistance and I will write =
down a small howto that should work out of the box else I might have =
some time to see if I can get things =
going.<br><br>Regards,<br><br>Joop<br><br></blockquote></div><br></div></b=
ody></html>=
--Apple-Mail=_DF4BF6D1-1F87-4F60-9CF9-070D4D836241--
5 years, 11 months
Re: [ovirt-users] Question about the ovirt-engine-sdk-java
by Michael Pasternak
------=_Part_1975902_834617789.1445161505459
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: quoted-printable
Hi=C2=A0Salifou,
Actually java sdk is=C2=A0intentionally=C2=A0hiding transport level interna=
ls so developers could stay in java domain,if your headers are static, easi=
est way would be using reverse proxy in a middle to intercept requests,=C2=
=A0
can you tell me why do you need this?
=20
On Friday, October 16, 2015 1:14 AM, Salifou Sidi M. Malick <ssidimah@=
redhat.com> wrote:
=20
Hi Micheal,
I have a question about the ovirt-engine-sdk-java.
Is there a way to add custom request headers to each RHEVM API call?
Here is an example of a request that I would like to do:
$ curl -v -k \
=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 -H "ID: user1(a)ad.xyz.com" \
=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 -H "PASSWORD: Pwssd" \
=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 -H "TARGET: kobe" \
=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 https://vm0.smalick.com/api/hosts
I would like to add ID, PASSWORD and TARGET as HTTP request header.=20
Thanks,
Salifou
------=_Part_1975902_834617789.1445161505459
Content-Type: text/html; charset=UTF-8
Content-Transfer-Encoding: quoted-printable
<html><head></head><body><div style=3D"color:#000; background-color:#fff; f=
ont-family:HelveticaNeue-Light, Helvetica Neue Light, Helvetica Neue, Helve=
tica, Arial, Lucida Grande, sans-serif;font-size:13px"><div id=3D"yui_3_16_=
0_1_1445160422533_3555" dir=3D"ltr"><span id=3D"yui_3_16_0_1_1445160422533_=
4552">Hi </span><span style=3D"font-family: 'Helvetica Neue', 'Segoe U=
I', Helvetica, Arial, 'Lucida Grande', sans-serif;" id=3D"yui_3_16_0_1_1445=
160422533_3568" class=3D"">Salifou,</span></div><div id=3D"yui_3_16_0_1_144=
5160422533_3555" dir=3D"ltr"><span style=3D"font-family: 'Helvetica Neue', =
'Segoe UI', Helvetica, Arial, 'Lucida Grande', sans-serif;" class=3D""><br>=
</span></div><div id=3D"yui_3_16_0_1_1445160422533_3555" dir=3D"ltr"><span =
style=3D"font-family: 'Helvetica Neue', 'Segoe UI', Helvetica, Arial, 'Luci=
da Grande', sans-serif;" class=3D"" id=3D"yui_3_16_0_1_1445160422533_3595">=
Actually java sdk is </span><span style=3D"font-family: 'Helvetica Neu=
e', 'Segoe UI', Helvetica, Arial, 'Lucida Grande', sans-serif;" id=3D"yui_3=
_16_0_1_1445160422533_4360" class=3D"">intentionally </span><span styl=
e=3D"font-family: 'Helvetica Neue', 'Segoe UI', Helvetica, Arial, 'Lucida G=
rande', sans-serif;" id=3D"yui_3_16_0_1_1445160422533_4362" class=3D"">hidi=
ng transport level internals so developers could stay in java domain,</span=
></div><div id=3D"yui_3_16_0_1_1445160422533_3555" dir=3D"ltr"><span class=
=3D"" id=3D"yui_3_16_0_1_1445160422533_4435"><font face=3D"Helvetica Neue, =
Segoe UI, Helvetica, Arial, Lucida Grande, sans-serif" id=3D"yui_3_16_0_1_1=
445160422533_4432" class=3D"">if your headers are static, easiest way would=
be using reverse proxy in a middle to intercept requests, </font><br>=
</span></div><div id=3D"yui_3_16_0_1_1445160422533_3555" dir=3D"ltr"><span =
class=3D""><font face=3D"Helvetica Neue, Segoe UI, Helvetica, Arial, Lucida=
Grande, sans-serif" class=3D""><br></font></span></div><div id=3D"yui_3_16=
_0_1_1445160422533_3555" dir=3D"ltr"><span style=3D"font-family: 'Helvetica=
Neue', 'Segoe UI', Helvetica, Arial, 'Lucida Grande', sans-serif;" id=3D"y=
ui_3_16_0_1_1445160422533_4357">can you tell me why do you need this?</span=
><br></div> <br><div class=3D"qtdSeparateBR"><br><br></div><div class=3D"y=
ahoo_quoted" style=3D"display: block;"> <div style=3D"font-family: Helvetic=
aNeue-Light, Helvetica Neue Light, Helvetica Neue, Helvetica, Arial, Lucida=
Grande, sans-serif; font-size: 13px;"> <div style=3D"font-family: Helvetic=
aNeue, Helvetica Neue, Helvetica, Arial, Lucida Grande, sans-serif; font-si=
ze: 16px;"> <div dir=3D"ltr"> <font size=3D"2" face=3D"Arial"> On Friday, O=
ctober 16, 2015 1:14 AM, Salifou Sidi M. Malick <ssidimah(a)redhat.com>=
wrote:<br> </font> </div> <br><br> <div class=3D"y_msg_container">Hi Mich=
eal,<br><br>I have a question about the ovirt-engine-sdk-java.<br><br>Is th=
ere a way to add custom request headers to each RHEVM API call?<br><br>Here=
is an example of a request that I would like to do:<br><br>$ curl -v -k \<=
br> -H "ID: <a ymailto=3D"mailto:user1@ad=
.xyz.com" href=3D"mailto:user1@ad.xyz.com">user1(a)ad.xyz.com</a>" \<br> =
; -H "PASSWORD: Pwssd" \<br>  =
; -H "TARGET: kobe" \<br> <=
a href=3D"https://vm0.smalick.com/api/hosts" target=3D"_blank">https://vm0.=
smalick.com/api/hosts</a><br><br><br>I would like to add ID, PASSWORD and T=
ARGET as HTTP request header. <br><br>Thanks,<br>Salifou<br><br><br><br></d=
iv> </div> </div> </div></div></body></html>
------=_Part_1975902_834617789.1445161505459--
5 years, 11 months
[Users] oVirt Weekly Sync Meeting Minutes -- 2012-05-23
by Mike Burns
Minutes: http://ovirt.org/meetings/ovirt/2012/ovirt.2012-05-23-14.00.html
Minutes (text): http://ovirt.org/meetings/ovirt/2012/ovirt.2012-05-23-14.00.txt
Log: http://ovirt.org/meetings/ovirt/2012/ovirt.2012-05-23-14.00.log.html
=========================
#ovirt: oVirt Weekly Sync
=========================
Meeting started by mburns at 14:00:23 UTC. The full logs are available
at http://ovirt.org/meetings/ovirt/2012/ovirt.2012-05-23-14.00.log.html
.
Meeting summary
---------------
* agenda and roll call (mburns, 14:00:41)
* Status of next release (mburns, 14:05:17)
* LINK: https://bugzilla.redhat.com/show_bug.cgi?id=822145 (mburns,
14:05:29)
* AGREED: freeze date and beta release delayed by 1 week to 2012-06-07
(mburns, 14:12:33)
* post freeze, release notes flag needs to be used where required
(mburns, 14:14:21)
* https://bugzilla.redhat.com/show_bug.cgi?id=821867 is a VDSM blocker
for 3.1 (oschreib, 14:17:27)
* ACTION: dougsland to fix upstream vdsm right now, and open a bug on
libvirt augeas (oschreib, 14:21:44)
* LINK: https://bugzilla.redhat.com/show_bug.cgi?id=822158 (mburns,
14:23:39)
* assignee not available, update to come tomorrow (mburns, 14:24:59)
* ACTION: oschreib to make sure BZ#822158 is handled quickly
(oschreib, 14:25:29)
* LINK: https://bugzilla.redhat.com/show_bug.cgi?id=824397 (mburns,
14:28:55)
* 824397 expected to be merged prior next week's meeting (mburns,
14:29:45)
* LINK: https://bugzilla.redhat.com/show_bug.cgi?id=824420 (mburns,
14:30:15)
* tracker for node based on F17 (mburns, 14:30:28)
* blocked by util-linux bug currently (mburns, 14:30:40)
* new build expected from util-linux maintainer in next couple days
(mburns, 14:30:55)
* sub-project status -- engine (mburns, 14:32:49)
* nothing to report outside of blockers discussed above (mburns,
14:34:00)
* sub-project status -- vdsm (mburns, 14:34:09)
* nothing outside of blockers above (mburns, 14:35:36)
* sub-project status -- node (mburns, 14:35:43)
* working on f17 migration, but blocked by util-linux bug (mburns,
14:35:58)
* should be ready for freeze deadline (mburns, 14:36:23)
* Review decision on Java 7 and Fedora jboss rpms in oVirt Engine
(mburns, 14:36:43)
* Java7 basically working (mburns, 14:37:19)
* LINK: http://gerrit.ovirt.org/#change,4416 (oschreib, 14:39:35)
* engine will make ack/nack statement next week (mburns, 14:39:49)
* fedora jboss rpms patch is in review, short tests passed (mburns,
14:40:04)
* engine ack on fedora jboss rpms and java7 needed next week (mburns,
14:44:47)
* Upcoming Workshops (mburns, 14:45:11)
* NetApp workshop set for Jan 22-24 2013 (mburns, 14:47:16)
* already at half capacity for Workshop at LinuxCon Japan (mburns,
14:47:37)
* please continue to promote it (mburns, 14:48:19)
* proposal: board meeting to be held at all major workshops (mburns,
14:48:43)
* LINK: http://www.ovirt.org/wiki/OVirt_Global_Workshops (mburns,
14:49:30)
* Open Discussion (mburns, 14:50:12)
* oVirt/Quantum integration discussion will be held separately
(mburns, 14:50:43)
Meeting ended at 14:52:47 UTC.
Action Items
------------
* dougsland to fix upstream vdsm right now, and open a bug on libvirt
augeas
* oschreib to make sure BZ#822158 is handled quickly
Action Items, by person
-----------------------
* dougsland
* dougsland to fix upstream vdsm right now, and open a bug on libvirt
augeas
* oschreib
* oschreib to make sure BZ#822158 is handled quickly
* **UNASSIGNED**
* (none)
People Present (lines said)
---------------------------
* mburns (98)
* oschreib (55)
* doronf (12)
* lh (11)
* sgordon (8)
* dougsland (8)
* ovirtbot (6)
* ofrenkel (4)
* cestila (2)
* RobertMdroid (2)
* ydary (2)
* rickyh (1)
* yzaslavs (1)
* cctrieloff (1)
* mestery_ (1)
* dustins (1)
Generated by `MeetBot`_ 0.1.4
.. _`MeetBot`: http://wiki.debian.org/MeetBot
5 years, 11 months
[QE][ACTION REQUIRED] oVirt 3.5.1 RC status - postponed
by Sandro Bonazzola
Hi,
We have still blockers for oVirt 3.5.1 RC release so we need to postpone it until they'll be fixed.
The bug tracker [1] shows 1 open blocker:
Bug ID Whiteboard Status Summary
1160846 sla NEW Can't add disk to VM without specifying disk profile when the storage domain has more than one disk profile
In order to stabilize the release a new branch ovirt-engine-3.5.1 will be created from the same git hash used for composing the RC.
- ACTION: Gilad please provide ETA on above blocker, the new proposed RC date will be decided on the given ETA.
Maintainers:
- Please be sure that 3.5 snapshot allow to create VMs
- Please be sure that no pending patches are going to block the release
- If any patch must block the RC release please raise the issue as soon as possible.
There are still 57 bugs [2] targeted to 3.5.1.
Excluding node and documentation bugs we still have 37 bugs [3] targeted to 3.5.1.
Maintainers / Assignee:
- Please add the bugs to the tracker if you think that 3.5.1 should not be released without them fixed.
- ACTION: Please update the target to 3.5.2 or later for bugs that won't be in 3.5.1:
it will ease gathering the blocking bugs for next releases.
- ACTION: Please fill release notes, the page has been created here [4]
Community:
- If you're testing oVirt 3.5 nightly snapshot, please add yourself to the test page [5]
[1] http://bugzilla.redhat.com/1155170
[2] http://goo.gl/7G0PDV
[3] http://goo.gl/6gUbVr
[4] http://www.ovirt.org/OVirt_3.5.1_Release_Notes
[5] http://www.ovirt.org/Testing/oVirt_3.5.1_Testing
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
5 years, 11 months
VM has paused due to no storage space error
by Sandvik Agustin
Hi users,
I have this problem that sometimes 1 to 3 VM just automatically paused with
user interaction and getting this error "VM has paused due to no storage
space error". any inputs from you guys are very appreciated.
TIA
Sandvik
5 years, 11 months
VM Import from remote libvirt Server on web gui with Host key verification failed or permission denied error
by Rogério Ceni Coelho
Hi Ovirt Jedi´s !!!
First of all, congratulations for this amazing product. I am an Vmware and
Hyper-V Engineer but i am very excited with oVirt.
Now, let´s go to work ... :-)
I am trying to Import vm from remote libvirt server on web gui but i was
unable to solve the problem until now.
[image: pasted1]
Node logs :
[root@hlg-rbs-ovirt-kvm01-poa ~]# tail -f /var/log/vdsm/vdsm.log | grep -i
error | grep -v Host.getStats
jsonrpc.Executor/0::ERROR::2016-10-06
10:24:52,432::v2v::151::root::(get_external_vms) error connection to
hypervisor: 'Cannot recv data: Permission denied, please try
again.\r\nPermission denied, please try again.\r\nPermission denied
(publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by
peer'
jsonrpc.Executor/0::INFO::2016-10-06
10:24:52,433::__init__::513::jsonrpc.JsonRpcServer::(_serveRequest) RPC
call Host.getExternalVMs failed (error 65) in 10.05 seconds
[root@hlg-rbs-ovirt-kvm02-poa ~]# grep error /var/log/vdsm/vdsm.log | grep
get_external_vms
jsonrpc.Executor/7::ERROR::2016-10-06
10:25:37,344::v2v::151::root::(get_external_vms) error connection to
hypervisor: 'Cannot recv data: Host key verification failed.: Connection
reset by peer'
[root@hlg-rbs-ovirt-kvm02-poa ~]#
Engine Logs :
[root@hlg-rbs-ovirt01-poa ~]# tail -f /var/log/ovirt-engine/engine.log
2016-10-06 10:24:42,377 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-97) [] START, GetVmsFromExternalProviderVDSCommand(HostName =
hlg-rbs-ovirt-kvm01-poa.rbs.com.br,
GetVmsFromExternalProviderParameters:{runAsync='true',
hostId='5feddfba-d7b2-423e-a946-ac2bf36906fa', url='qemu+ssh://
root(a)prd-openshift-kvm03-poa.rbs.com.br/system', username='root',
originType='KVM'}), log id: eb750c7
*2016-10-06 10:24:53,435 WARN
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-97) [] Unexpected return value: StatusForXmlRpc [code=65,
message=Cannot recv data: Permission denied, please try again.*
*Permission denied, please try again.*
*Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).:
Connection reset by peer]*
2016-10-06 10:24:53,435 ERROR
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-97) [] Failed in 'GetVmsFromExternalProviderVDS' method
2016-10-06 10:24:53,435 WARN
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-97) [] Unexpected return value: StatusForXmlRpc [code=65,
message=Cannot recv data: Permission denied, please try again.
Permission denied, please try again.
Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).:
Connection reset by peer]
2016-10-06 10:24:53,454 ERROR
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(default task-97) [] Correlation ID: null, Call Stack: null, Custom Event
ID: -1, Message: VDSM hlg-rbs-ovirt-kvm01-poa.rbs.com.br command failed:
Cannot recv data: Permission denied, please try again.
Permission denied, please try again.
Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).:
Connection reset by peer
2016-10-06 10:24:53,454 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-97) [] Command
'org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand'
return value
'org.ovirt.engine.core.vdsbroker.vdsbroker.VMListReturnForXmlRpc@6c6f696c'
2016-10-06 10:24:53,454 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-97) [] HostName = hlg-rbs-ovirt-kvm01-poa.rbs.com.br
2016-10-06 10:24:53,454 ERROR
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-97) [] Command 'GetVmsFromExternalProviderVDSCommand(HostName
= hlg-rbs-ovirt-kvm01-poa.rbs.com.br,
GetVmsFromExternalProviderParameters:{runAsync='true',
hostId='5feddfba-d7b2-423e-a946-ac2bf36906fa', url='qemu+ssh://
root(a)prd-openshift-kvm03-poa.rbs.com.br/system', username='root',
originType='KVM'})' execution failed: VDSGenericException:
VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot
recv data: Permission denied, please try again.
Permission denied, please try again.
Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).:
Connection reset by peer, code = 65
2016-10-06 10:24:53,454 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-97) [] FINISH, GetVmsFromExternalProviderVDSCommand, log id:
eb750c7
2016-10-06 10:24:53,459 ERROR
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(default task-97) [] Correlation ID: null, Call Stack: null, Custom Event
ID: -1, Message: Failed to retrieve VMs information from external server
qemu+ssh://root@prd-openshift-kvm03-poa.rbs.com.br/system
2016-10-06 10:24:53,459 ERROR
[org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery] (default
task-97) [] Query 'GetVmsFromExternalProviderQuery' failed:
EngineException:
org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException:
VDSGenericException: VDSErrorException: Failed to
GetVmsFromExternalProviderVDS, error = Cannot recv data: Permission denied,
please try again.
Permission denied, please try again.
Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).:
Connection reset by peer, code = 65 (Failed with error unexpected and code
16)
2016-10-06 10:24:53,460 ERROR
[org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery] (default
task-97) [] Exception: org.ovirt.engine.core.common.errors.EngineException:
EngineException:
org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException:
VDSGenericException: VDSErrorException: Failed to
GetVmsFromExternalProviderVDS, error = Cannot recv data: Permission denied,
please try again.
Permission denied, please try again.
Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).:
Connection reset by peer, code = 65 (Failed with error unexpected and code
16)
at
org.ovirt.engine.core.bll.VdsHandler.handleVdsResult(VdsHandler.java:114)
[bll.jar:]
at
org.ovirt.engine.core.bll.VDSBrokerFrontendImpl.runVdsCommand(VDSBrokerFrontendImpl.java:33)
[bll.jar:]
at
org.ovirt.engine.core.bll.QueriesCommandBase.runVdsCommand(QueriesCommandBase.java:257)
[bll.jar:]
at
org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery.getVmsFromExternalProvider(GetVmsFromExternalProviderQuery.java:32)
[bll.jar:]
at
org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery.executeQueryCommand(GetVmsFromExternalProviderQuery.java:27)
[bll.jar:]
at
org.ovirt.engine.core.bll.QueriesCommandBase.executeCommand(QueriesCommandBase.java:103)
[bll.jar:]
at
org.ovirt.engine.core.dal.VdcCommandBase.execute(VdcCommandBase.java:33)
[dal.jar:]
at org.ovirt.engine.core.bll.Backend.runQueryImpl(Backend.java:558)
[bll.jar:]
at org.ovirt.engine.core.bll.Backend.runQuery(Backend.java:529)
[bll.jar:]
at sun.reflect.GeneratedMethodAccessor181.invoke(Unknown Source)
[:1.8.0_102]
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
[rt.jar:1.8.0_102]
at java.lang.reflect.Method.invoke(Method.java:498)
[rt.jar:1.8.0_102]
at
org.jboss.as.ee.component.ManagedReferenceMethodInterceptor.processInvocation(ManagedReferenceMethodInterceptor.java:52)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437)
at
org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.delegateInterception(Jsr299BindingsInterceptor.java:70)
[wildfly-weld-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.doMethodInterception(Jsr299BindingsInterceptor.java:80)
[wildfly-weld-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.processInvocation(Jsr299BindingsInterceptor.java:93)
[wildfly-weld-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.as.ee.component.interceptors.UserInterceptorFactory$1.processInvocation(UserInterceptorFactory.java:63)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437)
at
org.ovirt.engine.core.bll.interceptors.CorrelationIdTrackerInterceptor.aroundInvoke(CorrelationIdTrackerInterceptor.java:13)
[bll.jar:]
at sun.reflect.GeneratedMethodAccessor179.invoke(Unknown Source)
[:1.8.0_102]
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
[rt.jar:1.8.0_102]
at java.lang.reflect.Method.invoke(Method.java:498)
[rt.jar:1.8.0_102]
at
org.jboss.as.ee.component.ManagedReferenceLifecycleMethodInterceptor.processInvocation(ManagedReferenceLifecycleMethodInterceptor.java:89)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.component.invocationmetrics.ExecutionTimeInterceptor.processInvocation(ExecutionTimeInterceptor.java:43)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437)
at
org.jboss.weld.ejb.AbstractEJBRequestScopeActivationInterceptor.aroundInvoke(AbstractEJBRequestScopeActivationInterceptor.java:73)
[weld-core-impl-2.3.2.Final.jar:2.3.2.Final]
at
org.jboss.as.weld.ejb.EjbRequestScopeActivationInterceptor.processInvocation(EjbRequestScopeActivationInterceptor.java:83)
[wildfly-weld-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ee.concurrent.ConcurrentContextInterceptor.processInvocation(ConcurrentContextInterceptor.java:45)
[wildfly-ee-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.InitialInterceptor.processInvocation(InitialInterceptor.java:21)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61)
at
org.jboss.as.ee.component.interceptors.ComponentDispatcherInterceptor.processInvocation(ComponentDispatcherInterceptor.java:52)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.component.singleton.SingletonComponentInstanceAssociationInterceptor.processInvocation(SingletonComponentInstanceAssociationInterceptor.java:53)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.tx.CMTTxInterceptor.invokeInNoTx(CMTTxInterceptor.java:263)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.as.ejb3.tx.CMTTxInterceptor.supports(CMTTxInterceptor.java:374)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.as.ejb3.tx.CMTTxInterceptor.processInvocation(CMTTxInterceptor.java:243)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.component.interceptors.CurrentInvocationContextInterceptor.processInvocation(CurrentInvocationContextInterceptor.java:41)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.component.invocationmetrics.WaitTimeInterceptor.processInvocation(WaitTimeInterceptor.java:43)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.security.SecurityContextInterceptor.processInvocation(SecurityContextInterceptor.java:100)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.component.interceptors.ShutDownInterceptorFactory$1.processInvocation(ShutDownInterceptorFactory.java:64)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.component.interceptors.LoggingInterceptor.processInvocation(LoggingInterceptor.java:66)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ee.component.NamespaceContextInterceptor.processInvocation(NamespaceContextInterceptor.java:50)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.ContextClassLoaderInterceptor.processInvocation(ContextClassLoaderInterceptor.java:64)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:356)
at
org.wildfly.security.manager.WildFlySecurityManager.doChecked(WildFlySecurityManager.java:636)
at
org.jboss.invocation.AccessCheckingInterceptor.processInvocation(AccessCheckingInterceptor.java:61)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:356)
at
org.jboss.invocation.PrivilegedWithCombinerInterceptor.processInvocation(PrivilegedWithCombinerInterceptor.java:80)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61)
at
org.jboss.as.ee.component.ViewService$View.invoke(ViewService.java:195)
at
org.jboss.as.ee.component.ViewDescription$1.processInvocation(ViewDescription.java:185)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61)
at
org.jboss.as.ee.component.ProxyInvocationHandler.invoke(ProxyInvocationHandler.java:73)
at
org.ovirt.engine.core.common.interfaces.BackendLocal$$$view3.runQuery(Unknown
Source) [common.jar:]
at
org.ovirt.engine.ui.frontend.server.gwt.GenericApiGWTServiceImpl.runQuery(GenericApiGWTServiceImpl.java:53)
at sun.reflect.GeneratedMethodAccessor222.invoke(Unknown Source)
[:1.8.0_102]
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
[rt.jar:1.8.0_102]
at java.lang.reflect.Method.invoke(Method.java:498)
[rt.jar:1.8.0_102]
at
com.google.gwt.rpc.server.RPC.invokeAndStreamResponse(RPC.java:196)
at
com.google.gwt.rpc.server.RpcServlet.processCall(RpcServlet.java:172)
at
com.google.gwt.rpc.server.RpcServlet.processPost(RpcServlet.java:233)
at
com.google.gwt.user.server.rpc.AbstractRemoteServiceServlet.doPost(AbstractRemoteServiceServlet.java:62)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
[jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final]
at javax.servlet.http.HttpServlet.service(HttpServlet.java:790)
[jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final]
at
io.undertow.servlet.handlers.ServletHandler.handleRequest(ServletHandler.java:85)
at
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:129)
at
org.ovirt.engine.core.utils.servlet.HeaderFilter.doFilter(HeaderFilter.java:94)
[utils.jar:]
at
io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60)
at
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131)
at
org.ovirt.engine.ui.frontend.server.gwt.GwtCachingFilter.doFilter(GwtCachingFilter.java:132)
at
io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60)
at
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131)
at
org.ovirt.engine.core.branding.BrandingFilter.doFilter(BrandingFilter.java:73)
[branding.jar:]
at
io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60)
at
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131)
at
org.ovirt.engine.core.utils.servlet.LocaleFilter.doFilter(LocaleFilter.java:66)
[utils.jar:]
at
io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60)
at
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131)
at
io.undertow.servlet.handlers.FilterHandler.handleRequest(FilterHandler.java:84)
at
io.undertow.servlet.handlers.security.ServletSecurityRoleHandler.handleRequest(ServletSecurityRoleHandler.java:62)
at
io.undertow.servlet.handlers.ServletDispatchingHandler.handleRequest(ServletDispatchingHandler.java:36)
at
org.wildfly.extension.undertow.security.SecurityContextAssociationHandler.handleRequest(SecurityContextAssociationHandler.java:78)
at
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43)
at
io.undertow.servlet.handlers.security.SSLInformationAssociationHandler.handleRequest(SSLInformationAssociationHandler.java:131)
at
io.undertow.servlet.handlers.security.ServletAuthenticationCallHandler.handleRequest(ServletAuthenticationCallHandler.java:57)
at
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43)
at
io.undertow.security.handlers.AuthenticationConstraintHandler.handleRequest(AuthenticationConstraintHandler.java:51)
at
io.undertow.security.handlers.AbstractConfidentialityHandler.handleRequest(AbstractConfidentialityHandler.java:46)
at
io.undertow.servlet.handlers.security.ServletConfidentialityConstraintHandler.handleRequest(ServletConfidentialityConstraintHandler.java:64)
at
io.undertow.servlet.handlers.security.ServletSecurityConstraintHandler.handleRequest(ServletSecurityConstraintHandler.java:56)
at
io.undertow.security.handlers.AuthenticationMechanismsHandler.handleRequest(AuthenticationMechanismsHandler.java:60)
at
io.undertow.servlet.handlers.security.CachedAuthenticatedSessionHandler.handleRequest(CachedAuthenticatedSessionHandler.java:77)
at
io.undertow.security.handlers.NotificationReceiverHandler.handleRequest(NotificationReceiverHandler.java:50)
at
io.undertow.security.handlers.AbstractSecurityContextAssociationHandler.handleRequest(AbstractSecurityContextAssociationHandler.java:43)
at
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43)
at
org.wildfly.extension.undertow.security.jacc.JACCContextIdHandler.handleRequest(JACCContextIdHandler.java:61)
at
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43)
at
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43)
at
io.undertow.servlet.handlers.ServletInitialHandler.handleFirstRequest(ServletInitialHandler.java:284)
at
io.undertow.servlet.handlers.ServletInitialHandler.dispatchRequest(ServletInitialHandler.java:263)
at
io.undertow.servlet.handlers.ServletInitialHandler.access$000(ServletInitialHandler.java:81)
at
io.undertow.servlet.handlers.ServletInitialHandler$1.handleRequest(ServletInitialHandler.java:174)
at
io.undertow.server.Connectors.executeRootHandler(Connectors.java:202)
at
io.undertow.server.HttpServerExchange$1.run(HttpServerExchange.java:793)
at
java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142)
[rt.jar:1.8.0_102]
at
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617)
[rt.jar:1.8.0_102]
at java.lang.Thread.run(Thread.java:745) [rt.jar:1.8.0_102]
2016-10-06 10:25:27,202 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-113) [] START, GetVmsFromExternalProviderVDSCommand(HostName
= hlg-rbs-ovirt-kvm02-poa.rbs.com.br,
GetVmsFromExternalProviderParameters:{runAsync='true',
hostId='f9c9d929-b460-4102-bb29-de1e6ad6ad72', url='qemu+ssh://
root(a)prd-openshift-kvm03-poa.rbs.com.br/system', username='root',
originType='KVM'}), log id: 4f3174a6
*2016-10-06 10:25:38,338 WARN
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-113) [] Unexpected return value: StatusForXmlRpc [code=65,
message=Cannot recv data: Host key verification failed.: Connection reset
by peer]*
2016-10-06 10:25:38,338 ERROR
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-113) [] Failed in 'GetVmsFromExternalProviderVDS' method
2016-10-06 10:25:38,338 WARN
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-113) [] Unexpected return value: StatusForXmlRpc [code=65,
message=Cannot recv data: Host key verification failed.: Connection reset
by peer]
2016-10-06 10:25:38,343 ERROR
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(default task-113) [] Correlation ID: null, Call Stack: null, Custom Event
ID: -1, Message: VDSM hlg-rbs-ovirt-kvm02-poa.rbs.com.br command failed:
Cannot recv data: Host key verification failed.: Connection reset by peer
2016-10-06 10:25:38,343 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-113) [] Command
'org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand'
return value
'org.ovirt.engine.core.vdsbroker.vdsbroker.VMListReturnForXmlRpc@42dd60af'
2016-10-06 10:25:38,343 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-113) [] HostName = hlg-rbs-ovirt-kvm02-poa.rbs.com.br
2016-10-06 10:25:38,343 ERROR
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-113) [] Command
'GetVmsFromExternalProviderVDSCommand(HostName =
hlg-rbs-ovirt-kvm02-poa.rbs.com.br,
GetVmsFromExternalProviderParameters:{runAsync='true',
hostId='f9c9d929-b460-4102-bb29-de1e6ad6ad72', url='qemu+ssh://
root(a)prd-openshift-kvm03-poa.rbs.com.br/system', username='root',
originType='KVM'})' execution failed: VDSGenericException:
VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot
recv data: Host key verification failed.: Connection reset by peer, code =
65
2016-10-06 10:25:38,343 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-113) [] FINISH, GetVmsFromExternalProviderVDSCommand, log id:
4f3174a6
2016-10-06 10:25:38,344 ERROR
[org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery] (default
task-113) [] Query 'GetVmsFromExternalProviderQuery' failed:
EngineException:
org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException:
VDSGenericException: VDSErrorException: Failed to
GetVmsFromExternalProviderVDS, error = Cannot recv data: Host key
verification failed.: Connection reset by peer, code = 65 (Failed with
error unexpected and code 16)
2016-10-06 10:25:38,345 ERROR
[org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery] (default
task-113) [] Exception:
org.ovirt.engine.core.common.errors.EngineException: EngineException:
org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException:
VDSGenericException: VDSErrorException: Failed to
GetVmsFromExternalProviderVDS, error = Cannot recv data: Host key
verification failed.: Connection reset by peer, code = 65 (Failed with
error unexpected and code 16)
at
org.ovirt.engine.core.bll.VdsHandler.handleVdsResult(VdsHandler.java:114)
[bll.jar:]
at
org.ovirt.engine.core.bll.VDSBrokerFrontendImpl.runVdsCommand(VDSBrokerFrontendImpl.java:33)
[bll.jar:]
at
org.ovirt.engine.core.bll.QueriesCommandBase.runVdsCommand(QueriesCommandBase.java:257)
[bll.jar:]
at
org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery.getVmsFromExternalProvider(GetVmsFromExternalProviderQuery.java:32)
[bll.jar:]
at
org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery.executeQueryCommand(GetVmsFromExternalProviderQuery.java:27)
[bll.jar:]
at
org.ovirt.engine.core.bll.QueriesCommandBase.executeCommand(QueriesCommandBase.java:103)
[bll.jar:]
at
org.ovirt.engine.core.dal.VdcCommandBase.execute(VdcCommandBase.java:33)
[dal.jar:]
at org.ovirt.engine.core.bll.Backend.runQueryImpl(Backend.java:558)
[bll.jar:]
at org.ovirt.engine.core.bll.Backend.runQuery(Backend.java:529)
[bll.jar:]
at sun.reflect.GeneratedMethodAccessor181.invoke(Unknown Source)
[:1.8.0_102]
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
[rt.jar:1.8.0_102]
at java.lang.reflect.Method.invoke(Method.java:498)
[rt.jar:1.8.0_102]
at
org.jboss.as.ee.component.ManagedReferenceMethodInterceptor.processInvocation(ManagedReferenceMethodInterceptor.java:52)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437)
at
org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.delegateInterception(Jsr299BindingsInterceptor.java:70)
[wildfly-weld-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.doMethodInterception(Jsr299BindingsInterceptor.java:80)
[wildfly-weld-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.processInvocation(Jsr299BindingsInterceptor.java:93)
[wildfly-weld-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.as.ee.component.interceptors.UserInterceptorFactory$1.processInvocation(UserInterceptorFactory.java:63)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437)
at
org.ovirt.engine.core.bll.interceptors.CorrelationIdTrackerInterceptor.aroundInvoke(CorrelationIdTrackerInterceptor.java:13)
[bll.jar:]
at sun.reflect.GeneratedMethodAccessor179.invoke(Unknown Source)
[:1.8.0_102]
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
[rt.jar:1.8.0_102]
at java.lang.reflect.Method.invoke(Method.java:498)
[rt.jar:1.8.0_102]
at
org.jboss.as.ee.component.ManagedReferenceLifecycleMethodInterceptor.processInvocation(ManagedReferenceLifecycleMethodInterceptor.java:89)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.component.invocationmetrics.ExecutionTimeInterceptor.processInvocation(ExecutionTimeInterceptor.java:43)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437)
at
org.jboss.weld.ejb.AbstractEJBRequestScopeActivationInterceptor.aroundInvoke(AbstractEJBRequestScopeActivationInterceptor.java:73)
[weld-core-impl-2.3.2.Final.jar:2.3.2.Final]
at
org.jboss.as.weld.ejb.EjbRequestScopeActivationInterceptor.processInvocation(EjbRequestScopeActivationInterceptor.java:83)
[wildfly-weld-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ee.concurrent.ConcurrentContextInterceptor.processInvocation(ConcurrentContextInterceptor.java:45)
[wildfly-ee-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.InitialInterceptor.processInvocation(InitialInterceptor.java:21)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61)
at
org.jboss.as.ee.component.interceptors.ComponentDispatcherInterceptor.processInvocation(ComponentDispatcherInterceptor.java:52)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.component.singleton.SingletonComponentInstanceAssociationInterceptor.processInvocation(SingletonComponentInstanceAssociationInterceptor.java:53)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.tx.CMTTxInterceptor.invokeInNoTx(CMTTxInterceptor.java:263)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.as.ejb3.tx.CMTTxInterceptor.supports(CMTTxInterceptor.java:374)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.as.ejb3.tx.CMTTxInterceptor.processInvocation(CMTTxInterceptor.java:243)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.component.interceptors.CurrentInvocationContextInterceptor.processInvocation(CurrentInvocationContextInterceptor.java:41)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.component.invocationmetrics.WaitTimeInterceptor.processInvocation(WaitTimeInterceptor.java:43)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.security.SecurityContextInterceptor.processInvocation(SecurityContextInterceptor.java:100)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.component.interceptors.ShutDownInterceptorFactory$1.processInvocation(ShutDownInterceptorFactory.java:64)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.component.interceptors.LoggingInterceptor.processInvocation(LoggingInterceptor.java:66)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ee.component.NamespaceContextInterceptor.processInvocation(NamespaceContextInterceptor.java:50)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.ContextClassLoaderInterceptor.processInvocation(ContextClassLoaderInterceptor.java:64)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:356)
at
org.wildfly.security.manager.WildFlySecurityManager.doChecked(WildFlySecurityManager.java:636)
at
org.jboss.invocation.AccessCheckingInterceptor.processInvocation(AccessCheckingInterceptor.java:61)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:356)
at
org.jboss.invocation.PrivilegedWithCombinerInterceptor.processInvocation(PrivilegedWithCombinerInterceptor.java:80)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61)
at
org.jboss.as.ee.component.ViewService$View.invoke(ViewService.java:195)
at
org.jboss.as.ee.component.ViewDescription$1.processInvocation(ViewDescription.java:185)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61)
at
org.jboss.as.ee.component.ProxyInvocationHandler.invoke(ProxyInvocationHandler.java:73)
at
org.ovirt.engine.core.common.interfaces.BackendLocal$$$view3.runQuery(Unknown
Source) [common.jar:]
at
org.ovirt.engine.ui.frontend.server.gwt.GenericApiGWTServiceImpl.runQuery(GenericApiGWTServiceImpl.java:53)
at sun.reflect.GeneratedMethodAccessor222.invoke(Unknown Source)
[:1.8.0_102]
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
[rt.jar:1.8.0_102]
at java.lang.reflect.Method.invoke(Method.java:498)
[rt.jar:1.8.0_102]
at
com.google.gwt.rpc.server.RPC.invokeAndStreamResponse(RPC.java:196)
at
com.google.gwt.rpc.server.RpcServlet.processCall(RpcServlet.java:172)
at
com.google.gwt.rpc.server.RpcServlet.processPost(RpcServlet.java:233)
at
com.google.gwt.user.server.rpc.AbstractRemoteServiceServlet.doPost(AbstractRemoteServiceServlet.java:62)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
[jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final]
at javax.servlet.http.HttpServlet.service(HttpServlet.java:790)
[jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final]
at
io.undertow.servlet.handlers.ServletHandler.handleRequest(ServletHandler.java:85)
at
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:129)
at
org.ovirt.engine.core.utils.servlet.HeaderFilter.doFilter(HeaderFilter.java:94)
[utils.jar:]
at
io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60)
at
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131)
at
org.ovirt.engine.ui.frontend.server.gwt.GwtCachingFilter.doFilter(GwtCachingFilter.java:132)
at
io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60)
at
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131)
at
org.ovirt.engine.core.branding.BrandingFilter.doFilter(BrandingFilter.java:73)
[branding.jar:]
at
io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60)
at
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131)
at
org.ovirt.engine.core.utils.servlet.LocaleFilter.doFilter(LocaleFilter.java:66)
[utils.jar:]
at
io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60)
at
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131)
at
io.undertow.servlet.handlers.FilterHandler.handleRequest(FilterHandler.java:84)
at
io.undertow.servlet.handlers.security.ServletSecurityRoleHandler.handleRequest(ServletSecurityRoleHandler.java:62)
at
io.undertow.servlet.handlers.ServletDispatchingHandler.handleRequest(ServletDispatchingHandler.java:36)
at
org.wildfly.extension.undertow.security.SecurityContextAssociationHandler.handleRequest(SecurityContextAssociationHandler.java:78)
at
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43)
at
io.undertow.servlet.handlers.security.SSLInformationAssociationHandler.handleRequest(SSLInformationAssociationHandler.java:131)
at
io.undertow.servlet.handlers.security.ServletAuthenticationCallHandler.handleRequest(ServletAuthenticationCallHandler.java:57)
at
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43)
at
io.undertow.security.handlers.AuthenticationConstraintHandler.handleRequest(AuthenticationConstraintHandler.java:51)
at
io.undertow.security.handlers.AbstractConfidentialityHandler.handleRequest(AbstractConfidentialityHandler.java:46)
at
io.undertow.servlet.handlers.security.ServletConfidentialityConstraintHandler.handleRequest(ServletConfidentialityConstraintHandler.java:64)
at
io.undertow.servlet.handlers.security.ServletSecurityConstraintHandler.handleRequest(ServletSecurityConstraintHandler.java:56)
at
io.undertow.security.handlers.AuthenticationMechanismsHandler.handleRequest(AuthenticationMechanismsHandler.java:60)
at
io.undertow.servlet.handlers.security.CachedAuthenticatedSessionHandler.handleRequest(CachedAuthenticatedSessionHandler.java:77)
at
io.undertow.security.handlers.NotificationReceiverHandler.handleRequest(NotificationReceiverHandler.java:50)
at
io.undertow.security.handlers.AbstractSecurityContextAssociationHandler.handleRequest(AbstractSecurityContextAssociationHandler.java:43)
at
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43)
at
org.wildfly.extension.undertow.security.jacc.JACCContextIdHandler.handleRequest(JACCContextIdHandler.java:61)
at
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43)
at
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43)
at
io.undertow.servlet.handlers.ServletInitialHandler.handleFirstRequest(ServletInitialHandler.java:284)
at
io.undertow.servlet.handlers.ServletInitialHandler.dispatchRequest(ServletInitialHandler.java:263)
at
io.undertow.servlet.handlers.ServletInitialHandler.access$000(ServletInitialHandler.java:81)
at
io.undertow.servlet.handlers.ServletInitialHandler$1.handleRequest(ServletInitialHandler.java:174)
at
io.undertow.server.Connectors.executeRootHandler(Connectors.java:202)
at
io.undertow.server.HttpServerExchange$1.run(HttpServerExchange.java:793)
at
java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142)
[rt.jar:1.8.0_102]
at
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617)
[rt.jar:1.8.0_102]
at java.lang.Thread.run(Thread.java:745) [rt.jar:1.8.0_102]
2016-10-06 10:25:52,527 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-118) [] START, GetVmsFromExternalProviderVDSCommand(HostName
= hlg-rbs-ovirt-kvm03-poa.rbs.com.br,
GetVmsFromExternalProviderParameters:{runAsync='true',
hostId='02ead14e-0208-4a74-b1c2-4c19383820f9', url='qemu+ssh://
root(a)prd-openshift-kvm03-poa.rbs.com.br/system', username='root',
originType='KVM'}), log id: 7c8b1e2d
2016-10-06 10:26:02,695 WARN
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-118) [] Unexpected return value: StatusForXmlRpc [code=65,
message=Cannot recv data: Permission denied, please try again.
Permission denied, please try again.
Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).:
Connection reset by peer]
2016-10-06 10:26:02,695 ERROR
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-118) [] Failed in 'GetVmsFromExternalProviderVDS' method
2016-10-06 10:26:02,696 WARN
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-118) [] Unexpected return value: StatusForXmlRpc [code=65,
message=Cannot recv data: Permission denied, please try again.
Permission denied, please try again.
Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).:
Connection reset by peer]
2016-10-06 10:26:02,701 ERROR
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(default task-118) [] Correlation ID: null, Call Stack: null, Custom Event
ID: -1, Message: VDSM hlg-rbs-ovirt-kvm03-poa.rbs.com.br command failed:
Cannot recv data: Permission denied, please try again.
Permission denied, please try again.
Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).:
Connection reset by peer
2016-10-06 10:26:02,701 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-118) [] Command
'org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand'
return value
'org.ovirt.engine.core.vdsbroker.vdsbroker.VMListReturnForXmlRpc@5ce9f7f2'
2016-10-06 10:26:02,701 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-118) [] HostName = hlg-rbs-ovirt-kvm03-poa.rbs.com.br
2016-10-06 10:26:02,701 ERROR
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-118) [] Command
'GetVmsFromExternalProviderVDSCommand(HostName =
hlg-rbs-ovirt-kvm03-poa.rbs.com.br,
GetVmsFromExternalProviderParameters:{runAsync='true',
hostId='02ead14e-0208-4a74-b1c2-4c19383820f9', url='qemu+ssh://
root(a)prd-openshift-kvm03-poa.rbs.com.br/system', username='root',
originType='KVM'})' execution failed: VDSGenericException:
VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot
recv data: Permission denied, please try again.
Permission denied, please try again.
Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).:
Connection reset by peer, code = 65
2016-10-06 10:26:02,701 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand]
(default task-118) [] FINISH, GetVmsFromExternalProviderVDSCommand, log id:
7c8b1e2d
2016-10-06 10:26:02,701 ERROR
[org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery] (default
task-118) [] Query 'GetVmsFromExternalProviderQuery' failed:
EngineException:
org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException:
VDSGenericException: VDSErrorException: Failed to
GetVmsFromExternalProviderVDS, error = Cannot recv data: Permission denied,
please try again.
Permission denied, please try again.
Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).:
Connection reset by peer, code = 65 (Failed with error unexpected and code
16)
2016-10-06 10:26:02,701 ERROR
[org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery] (default
task-118) [] Exception:
org.ovirt.engine.core.common.errors.EngineException: EngineException:
org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException:
VDSGenericException: VDSErrorException: Failed to
GetVmsFromExternalProviderVDS, error = Cannot recv data: Permission denied,
please try again.
Permission denied, please try again.
Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).:
Connection reset by peer, code = 65 (Failed with error unexpected and code
16)
at
org.ovirt.engine.core.bll.VdsHandler.handleVdsResult(VdsHandler.java:114)
[bll.jar:]
at
org.ovirt.engine.core.bll.VDSBrokerFrontendImpl.runVdsCommand(VDSBrokerFrontendImpl.java:33)
[bll.jar:]
at
org.ovirt.engine.core.bll.QueriesCommandBase.runVdsCommand(QueriesCommandBase.java:257)
[bll.jar:]
at
org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery.getVmsFromExternalProvider(GetVmsFromExternalProviderQuery.java:32)
[bll.jar:]
at
org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery.executeQueryCommand(GetVmsFromExternalProviderQuery.java:27)
[bll.jar:]
at
org.ovirt.engine.core.bll.QueriesCommandBase.executeCommand(QueriesCommandBase.java:103)
[bll.jar:]
at
org.ovirt.engine.core.dal.VdcCommandBase.execute(VdcCommandBase.java:33)
[dal.jar:]
at org.ovirt.engine.core.bll.Backend.runQueryImpl(Backend.java:558)
[bll.jar:]
at org.ovirt.engine.core.bll.Backend.runQuery(Backend.java:529)
[bll.jar:]
at sun.reflect.GeneratedMethodAccessor181.invoke(Unknown Source)
[:1.8.0_102]
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
[rt.jar:1.8.0_102]
at java.lang.reflect.Method.invoke(Method.java:498)
[rt.jar:1.8.0_102]
at
org.jboss.as.ee.component.ManagedReferenceMethodInterceptor.processInvocation(ManagedReferenceMethodInterceptor.java:52)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437)
at
org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.delegateInterception(Jsr299BindingsInterceptor.java:70)
[wildfly-weld-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.doMethodInterception(Jsr299BindingsInterceptor.java:80)
[wildfly-weld-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.processInvocation(Jsr299BindingsInterceptor.java:93)
[wildfly-weld-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.as.ee.component.interceptors.UserInterceptorFactory$1.processInvocation(UserInterceptorFactory.java:63)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437)
at
org.ovirt.engine.core.bll.interceptors.CorrelationIdTrackerInterceptor.aroundInvoke(CorrelationIdTrackerInterceptor.java:13)
[bll.jar:]
at sun.reflect.GeneratedMethodAccessor179.invoke(Unknown Source)
[:1.8.0_102]
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
[rt.jar:1.8.0_102]
at java.lang.reflect.Method.invoke(Method.java:498)
[rt.jar:1.8.0_102]
at
org.jboss.as.ee.component.ManagedReferenceLifecycleMethodInterceptor.processInvocation(ManagedReferenceLifecycleMethodInterceptor.java:89)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.component.invocationmetrics.ExecutionTimeInterceptor.processInvocation(ExecutionTimeInterceptor.java:43)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437)
at
org.jboss.weld.ejb.AbstractEJBRequestScopeActivationInterceptor.aroundInvoke(AbstractEJBRequestScopeActivationInterceptor.java:73)
[weld-core-impl-2.3.2.Final.jar:2.3.2.Final]
at
org.jboss.as.weld.ejb.EjbRequestScopeActivationInterceptor.processInvocation(EjbRequestScopeActivationInterceptor.java:83)
[wildfly-weld-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ee.concurrent.ConcurrentContextInterceptor.processInvocation(ConcurrentContextInterceptor.java:45)
[wildfly-ee-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.InitialInterceptor.processInvocation(InitialInterceptor.java:21)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61)
at
org.jboss.as.ee.component.interceptors.ComponentDispatcherInterceptor.processInvocation(ComponentDispatcherInterceptor.java:52)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.component.singleton.SingletonComponentInstanceAssociationInterceptor.processInvocation(SingletonComponentInstanceAssociationInterceptor.java:53)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.tx.CMTTxInterceptor.invokeInNoTx(CMTTxInterceptor.java:263)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.as.ejb3.tx.CMTTxInterceptor.supports(CMTTxInterceptor.java:374)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.as.ejb3.tx.CMTTxInterceptor.processInvocation(CMTTxInterceptor.java:243)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.component.interceptors.CurrentInvocationContextInterceptor.processInvocation(CurrentInvocationContextInterceptor.java:41)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.component.invocationmetrics.WaitTimeInterceptor.processInvocation(WaitTimeInterceptor.java:43)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.security.SecurityContextInterceptor.processInvocation(SecurityContextInterceptor.java:100)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.component.interceptors.ShutDownInterceptorFactory$1.processInvocation(ShutDownInterceptorFactory.java:64)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ejb3.component.interceptors.LoggingInterceptor.processInvocation(LoggingInterceptor.java:66)
[wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final]
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.as.ee.component.NamespaceContextInterceptor.processInvocation(NamespaceContextInterceptor.java:50)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.ContextClassLoaderInterceptor.processInvocation(ContextClassLoaderInterceptor.java:64)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:356)
at
org.wildfly.security.manager.WildFlySecurityManager.doChecked(WildFlySecurityManager.java:636)
at
org.jboss.invocation.AccessCheckingInterceptor.processInvocation(AccessCheckingInterceptor.java:61)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:356)
at
org.jboss.invocation.PrivilegedWithCombinerInterceptor.processInvocation(PrivilegedWithCombinerInterceptor.java:80)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61)
at
org.jboss.as.ee.component.ViewService$View.invoke(ViewService.java:195)
at
org.jboss.as.ee.component.ViewDescription$1.processInvocation(ViewDescription.java:185)
at
org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340)
at
org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61)
at
org.jboss.as.ee.component.ProxyInvocationHandler.invoke(ProxyInvocationHandler.java:73)
at
org.ovirt.engine.core.common.interfaces.BackendLocal$$$view3.runQuery(Unknown
Source) [common.jar:]
at
org.ovirt.engine.ui.frontend.server.gwt.GenericApiGWTServiceImpl.runQuery(GenericApiGWTServiceImpl.java:53)
at sun.reflect.GeneratedMethodAccessor222.invoke(Unknown Source)
[:1.8.0_102]
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
[rt.jar:1.8.0_102]
at java.lang.reflect.Method.invoke(Method.java:498)
[rt.jar:1.8.0_102]
at
com.google.gwt.rpc.server.RPC.invokeAndStreamResponse(RPC.java:196)
at
com.google.gwt.rpc.server.RpcServlet.processCall(RpcServlet.java:172)
at
com.google.gwt.rpc.server.RpcServlet.processPost(RpcServlet.java:233)
at
com.google.gwt.user.server.rpc.AbstractRemoteServiceServlet.doPost(AbstractRemoteServiceServlet.java:62)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
[jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final]
at javax.servlet.http.HttpServlet.service(HttpServlet.java:790)
[jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final]
at
io.undertow.servlet.handlers.ServletHandler.handleRequest(ServletHandler.java:85)
at
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:129)
at
org.ovirt.engine.core.utils.servlet.HeaderFilter.doFilter(HeaderFilter.java:94)
[utils.jar:]
at
io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60)
at
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131)
at
org.ovirt.engine.ui.frontend.server.gwt.GwtCachingFilter.doFilter(GwtCachingFilter.java:132)
at
io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60)
at
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131)
at
org.ovirt.engine.core.branding.BrandingFilter.doFilter(BrandingFilter.java:73)
[branding.jar:]
at
io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60)
at
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131)
at
org.ovirt.engine.core.utils.servlet.LocaleFilter.doFilter(LocaleFilter.java:66)
[utils.jar:]
at
io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60)
at
io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131)
at
io.undertow.servlet.handlers.FilterHandler.handleRequest(FilterHandler.java:84)
at
io.undertow.servlet.handlers.security.ServletSecurityRoleHandler.handleRequest(ServletSecurityRoleHandler.java:62)
at
io.undertow.servlet.handlers.ServletDispatchingHandler.handleRequest(ServletDispatchingHandler.java:36)
at
org.wildfly.extension.undertow.security.SecurityContextAssociationHandler.handleRequest(SecurityContextAssociationHandler.java:78)
at
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43)
at
io.undertow.servlet.handlers.security.SSLInformationAssociationHandler.handleRequest(SSLInformationAssociationHandler.java:131)
at
io.undertow.servlet.handlers.security.ServletAuthenticationCallHandler.handleRequest(ServletAuthenticationCallHandler.java:57)
at
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43)
at
io.undertow.security.handlers.AuthenticationConstraintHandler.handleRequest(AuthenticationConstraintHandler.java:51)
at
io.undertow.security.handlers.AbstractConfidentialityHandler.handleRequest(AbstractConfidentialityHandler.java:46)
at
io.undertow.servlet.handlers.security.ServletConfidentialityConstraintHandler.handleRequest(ServletConfidentialityConstraintHandler.java:64)
at
io.undertow.servlet.handlers.security.ServletSecurityConstraintHandler.handleRequest(ServletSecurityConstraintHandler.java:56)
at
io.undertow.security.handlers.AuthenticationMechanismsHandler.handleRequest(AuthenticationMechanismsHandler.java:60)
at
io.undertow.servlet.handlers.security.CachedAuthenticatedSessionHandler.handleRequest(CachedAuthenticatedSessionHandler.java:77)
at
io.undertow.security.handlers.NotificationReceiverHandler.handleRequest(NotificationReceiverHandler.java:50)
at
io.undertow.security.handlers.AbstractSecurityContextAssociationHandler.handleRequest(AbstractSecurityContextAssociationHandler.java:43)
at
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43)
at
org.wildfly.extension.undertow.security.jacc.JACCContextIdHandler.handleRequest(JACCContextIdHandler.java:61)
at
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43)
at
io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43)
at
io.undertow.servlet.handlers.ServletInitialHandler.handleFirstRequest(ServletInitialHandler.java:284)
at
io.undertow.servlet.handlers.ServletInitialHandler.dispatchRequest(ServletInitialHandler.java:263)
at
io.undertow.servlet.handlers.ServletInitialHandler.access$000(ServletInitialHandler.java:81)
at
io.undertow.servlet.handlers.ServletInitialHandler$1.handleRequest(ServletInitialHandler.java:174)
at
io.undertow.server.Connectors.executeRootHandler(Connectors.java:202)
at
io.undertow.server.HttpServerExchange$1.run(HttpServerExchange.java:793)
at
java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142)
[rt.jar:1.8.0_102]
at
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617)
[rt.jar:1.8.0_102]
at java.lang.Thread.run(Thread.java:745) [rt.jar:1.8.0_102]
^C
[root@hlg-rbs-ovirt01-poa ~]#
When i try with virsh i have sucess.
[root@hlg-rbs-ovirt-kvm01-poa ~]# virsh -c qemu+ssh://
root(a)prd-openshift-kvm03-poa.rbs.com.br/system
The authenticity of host 'prd-openshift-kvm03-poa.rbs.com.br (10.1.8.32)'
can't be established.
ECDSA key fingerprint is af:e9:12:29:65:ad:41:ab:0a:3c:a1:f0:73:1c:62:a5.
Are you sure you want to continue connecting (yes/no)? yes
root(a)prd-openshift-kvm03-poa.rbs.com.br's password:
Welcome to virsh, the virtualization interactive terminal.
Type: 'help' for help with commands
'quit' to quit
virsh # list
Id Name State
----------------------------------------------------
5 prd-openshift-etcd03-poa running
6 prd-openshift-master03-poa running
8 prd-openshift-node03-poa running
virsh # list --all
Id Name State
----------------------------------------------------
5 prd-openshift-etcd03-poa running
6 prd-openshift-master03-poa running
8 prd-openshift-node03-poa running
- teste shut off
- teste1 shut off
- tpl-centos72-64 shut off
virsh # quit
[root@hlg-rbs-ovirt-kvm01-poa ~]#
Thanks.
5 years, 11 months
Change host names/IPs
by Davide Ferrari
Hello
Is there a clean way and possibly without downtime to change the hostname
and IP addresses of all the hosts in a running oVirt cluster?
--
Davide Ferrari
Senior Systems Engineer
5 years, 11 months
[Users] Lifecycle / upgradepath
by Sven Kieske
Hi Community,
Currently, there is no single document describing supported
(which means: working ) upgrade scenarios.
I think the project has matured enough, to have such an supported
upgradepath, which should be considered in the development of new
releases.
As far as I know, currently it is supported to upgrade
from x.y.z to x.y.z+1 and from x.y.z to x.y+1.z
but not from x.y-1.z to x.y+1.z directly.
maybe this should be put together in a wiki page at least.
also it would be cool to know how long a single "release"
would be supported.
In this context I would define a release as a version
bump from x.y.z to x.y+1.z or to x+1.y.z
a bump in z would be a bugfix release.
The question is, how long will we get bugfix releases
for a given version?
What are your thoughts?
--
Mit freundlichen Grüßen / Regards
Sven Kieske
Systemadministrator
Mittwald CM Service GmbH & Co. KG
Königsberger Straße 6
32339 Espelkamp
T: +49-5772-293-100
F: +49-5772-293-333
https://www.mittwald.de
Geschäftsführer: Robert Meyer
St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen
Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen
5 years, 11 months
[Users] Nested virtualization with Opteron 2nd generation and oVirt 3.1 possible?
by Gianluca Cecchi
Hello,
I have 2 physical servers with Opteron 2nd gen cpu.
There is CentOS 6.3 installed and some VM already configured on them.
Their /proc/cpuinfo contains
...
model name : Dual-Core AMD Opteron(tm) Processor 8222
...
kvm_amd kernel module is loaded with its default enabled nested option
# systool -m kvm_amd -v
Module = "kvm_amd"
Attributes:
initstate = "live"
refcnt = "15"
srcversion = "43D8067144E7D8B0D53D46E"
Parameters:
nested = "1"
npt = "1"
...
I already configured a fedora 17 VM as a oVirt 3.1 Engine
I'm trying to configure another VM as oVirt 3.1 node with
ovirt-node-iso-2.5.5-0.1.fc17.iso
It seems I'm not able to configure so that ovirt install doesn't complain.
After some attempts, I tried this in my vm.xml for the cpu:
<cpu mode='custom' match='exact'>
<model fallback='allow'>athlon</model>
<vendor>AMD</vendor>
<feature policy='require' name='pni'/>
<feature policy='require' name='rdtscp'/>
<feature policy='force' name='svm'/>
<feature policy='require' name='clflush'/>
<feature policy='require' name='syscall'/>
<feature policy='require' name='lm'/>
<feature policy='require' name='cr8legacy'/>
<feature policy='require' name='ht'/>
<feature policy='require' name='lahf_lm'/>
<feature policy='require' name='fxsr_opt'/>
<feature policy='require' name='cx16'/>
<feature policy='require' name='extapic'/>
<feature policy='require' name='mca'/>
<feature policy='require' name='cmp_legacy'/>
</cpu>
Inside node /proc/cpuinfo becomes
processor : 3
vendor_id : AuthenticAMD
cpu family : 6
model : 2
model name : QEMU Virtual CPU version 0.12.1
stepping : 3
microcode : 0x1000065
cpu MHz : 3013.706
cache size : 512 KB
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat
pse36 clflush mmx fxsr sse sse2 syscall mmxext fxsr_opt lm nopl pni
cx16 hypervisor lahf_lm cmp_legacy cr8_legacy
bogomips : 6027.41
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management:
2 questions:
1) Is there any combination in xml file to give to my VM so that oVirt
doesn't complain about missing hardware virtualization with this
processor?
2) suppose 1) is not possible in my case and I still want to test the
interface and try some config operations to see for example the
differences with RHEV 3.0, how can I do?
At the moment this complaint about hw virtualization prevents me to
activate the node.
I get
Installing Host f17ovn01. Step: RHEV_INSTALL.
Host f17ovn01 was successfully approved.
Host f17ovn01 running without virtualization hardware acceleration
Detected new Host f17ovn01. Host state was set to Non Operational.
Host f17ovn01 moved to Non-Operational state.
Host f17ovn01 moved to Non-Operational state as host does not meet the
cluster's minimum CPU level. Missing CPU features : CpuFlags
Can I lower the requirements to be able to operate without hw
virtualization in 3.1?
Thanks in advance,
Gianluca
5 years, 11 months
Need VM run once api
by Chandrahasa S
This is a multipart message in MIME format.
--=_alternative 00361B2065257E90_=
Content-Type: text/plain; charset="US-ASCII"
Hi Experts,
We are integrating ovirt with our internal cloud.
Here we installed cloudinit in vm and then converted vm to template. We
deploy template with initial run parameter Hostname, IP Address, Gateway
and DNS.
but when we power ON initial, run parameter is not getting pushed to
inside the vm. But its working when we power on VM using run once option
on Ovirt portal.
I believe we need to power ON vm using run once API, but we are not able
get this API.
Can some one help on this.
I got reply on this query last time but unfortunately mail got deleted.
Thanks & Regards
Chandrahasa S
=====-----=====-----=====
Notice: The information contained in this e-mail
message and/or attachments to it may contain
confidential or privileged information. If you are
not the intended recipient, any dissemination, use,
review, distribution, printing or copying of the
information contained in this e-mail message
and/or attachments to it are strictly prohibited. If
you have received this communication in error,
please notify us by reply e-mail or telephone and
immediately and permanently delete the message
and any attachments. Thank you
--=_alternative 00361B2065257E90_=
Content-Type: text/html; charset="US-ASCII"
<font size=2 face="sans-serif">Hi Experts,</font>
<br>
<br><font size=2 face="sans-serif">We are integrating ovirt with our internal
cloud.</font>
<br>
<br><font size=2 face="sans-serif">Here we installed cloudinit in vm and
then converted vm to template. We deploy template with initial run parameter
Hostname, IP Address, Gateway and DNS.</font>
<br>
<br><font size=2 face="sans-serif">but when we power ON initial, run parameter
is not getting pushed to inside the vm. But its working when we power on
VM using run once option on Ovirt portal.</font>
<br>
<br><font size=2 face="sans-serif">I believe we need to power ON vm using
run once API, but we are not able get this API.</font>
<br>
<br><font size=2 face="sans-serif">Can some one help on this.</font>
<br>
<br><font size=2 face="sans-serif">I got reply on this query last time
but unfortunately mail got deleted.</font>
<br>
<br><font size=2 face="sans-serif">Thanks & Regards<br>
Chandrahasa S<br>
</font><p>=====-----=====-----=====<br>
Notice: The information contained in this e-mail<br>
message and/or attachments to it may contain <br>
confidential or privileged information. If you are <br>
not the intended recipient, any dissemination, use, <br>
review, distribution, printing or copying of the <br>
information contained in this e-mail message <br>
and/or attachments to it are strictly prohibited. If <br>
you have received this communication in error, <br>
please notify us by reply e-mail or telephone and <br>
immediately and permanently delete the message <br>
and any attachments. Thank you</p>
<p></p>
--=_alternative 00361B2065257E90_=--
5 years, 11 months
[Users] importing from kvm into ovirt
by Jonathan Horne
--_000_9BE6F493F83A594DA60C45E6A09DC5AC016BA694AUSP01DAG0201co_
Content-Type: text/plain; charset="Windows-1252"
Content-Transfer-Encoding: quoted-printable
I need to import a kvm virtual machine from a standalone kvm into my ovirt =
cluster. Standalone is using local storage, and my ovirt cluster is using =
iscsi. Can i please have some advice on whats the best way to get this sys=
tem into ovirt?
Right now i see it as copying the .img file to somewhere=85 but i have no i=
dea where to start. I found this directory on one of my ovirt nodes:
/rhev/data-center/mnt/blockSD/fe633237-14b2-4f8b-aedd-bbf753bcafaf/master/v=
ms
But inside is just directories that appear to have uuid-type of names, and =
i can't tell what belongs to which vm.
Any advice would be greatly appreciated.
Thanks,
jonathan
________________________________
This is a PRIVATE message. If you are not the intended recipient, please de=
lete without copying and kindly advise us by e-mail of the mistake in deliv=
ery. NOTE: Regardless of content, this e-mail shall not operate to bind SKO=
POS to any order or other contract unless pursuant to explicit written agre=
ement or government initiative expressly permitting the use of e-mail for s=
uch purpose.
--_000_9BE6F493F83A594DA60C45E6A09DC5AC016BA694AUSP01DAG0201co_
Content-Type: text/html; charset="Windows-1252"
Content-ID: <41FAB2B157C43549B6577A3495BA255C(a)collaborationhost.net>
Content-Transfer-Encoding: quoted-printable
<html>
<head>
<meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3DWindows-1=
252">
</head>
<body style=3D"word-wrap:break-word; color:rgb(0,0,0); font-size:14px; font=
-family:Calibri,sans-serif">
<div>
<div>
<div>I need to import a kvm virtual machine from a standalone kvm into my o=
virt cluster. Standalone is using local storage, and my ovirt cluster=
is using iscsi. Can i please have some advice on whats the best way =
to get this system into ovirt?</div>
</div>
</div>
<div><br>
</div>
<div>Right now i see it as copying the .img file to somewhere=85 but i have=
no idea where to start. I found this directory on one of my ovirt no=
des:</div>
<div><br>
</div>
<div>/rhev/data-center/mnt/blockSD/fe633237-14b2-4f8b-aedd-bbf753bcafaf/mas=
ter/vms</div>
<div><br>
</div>
<div>But inside is just directories that appear to have uuid-type of names,=
and i can't tell what belongs to which vm.</div>
<div><br>
</div>
<div>Any advice would be greatly appreciated.</div>
<div><br>
</div>
<div>Thanks,</div>
<div>jonathan</div>
<br>
<hr>
<font color=3D"Gray" face=3D"Arial" size=3D"1">This is a PRIVATE message. I=
f you are not the intended recipient, please delete without copying and kin=
dly advise us by e-mail of the mistake in delivery. NOTE: Regardless of con=
tent, this e-mail shall not operate to
bind SKOPOS to any order or other contract unless pursuant to explicit wri=
tten agreement or government initiative expressly permitting the use of e-m=
ail for such purpose.</font>
</body>
</html>
--_000_9BE6F493F83A594DA60C45E6A09DC5AC016BA694AUSP01DAG0201co_--
6 years
Trying to reset password for ovirt wiki
by noc
This is a multi-part message in MIME format.
--------------000005070002050708050606
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Hoping someone can help me out.
For some reason I keep getting the following error when I try to reset
my password:
Reset password
* Error sending mail: Failed to add recipient: jvandewege(a)nieuwland.nl
[SMTP: Invalid response code received from server (code: 554,
response: 5.7.1 <jvandewege(a)nieuwland.nl>: Relay access denied)]
Complete this form to receive an e-mail reminder of your account details.
Since I receive the ML on this address it is definitely a working address.
Tried my home account too and same error but then for my home provider,
Relay denied ??
A puzzled user,
Joop
--------------000005070002050708050606
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
<html>
<head>
<meta http-equiv="content-type" content="text/html; charset=ISO-8859-1">
</head>
<body bgcolor="#FFFFFF" text="#000000">
Hoping someone can help me out.<br>
For some reason I keep getting the following error when I try to
reset my password:<br>
<br>
<fieldset><legend>Reset password</legend>
<div class="error">
<ul>
<li>Error sending mail: Failed to add recipient:
<a class="moz-txt-link-abbreviated" href="mailto:jvandewege@nieuwland.nl">jvandewege(a)nieuwland.nl</a> [SMTP: Invalid response code
received from server (code: 554, response: 5.7.1
<a class="moz-txt-link-rfc2396E" href="mailto:jvandewege@nieuwland.nl"><jvandewege(a)nieuwland.nl></a>: Relay access denied)]</li>
</ul>
</div>
<p>Complete this form to receive an e-mail reminder of your
account details.<br>
</p>
</fieldset>
<br>
Since I receive the ML on this address it is definitely a working
address.<br>
Tried my home account too and same error but then for my home
provider, Relay denied ??<br>
<br>
A puzzled user,<br>
<br>
Joop<br>
<br>
</body>
</html>
--------------000005070002050708050606--
6 years
ovirt-guest-agent issue on rhel5.5
by John Michael Mercado
Hi All,
I need your help. Anyone who encounter the below error and have the
solution? Can you help me how to fix this?
MainThread::INFO::2015-01-27
10:22:53,247::ovirt-guest-agent::57::root::Starting oVirt guest agent
MainThread::ERROR::2015-01-27
10:22:53,248::ovirt-guest-agent::138::root::Unhandled exception in oVirt
guest agent!
Traceback (most recent call last):
File "/usr/share/ovirt-guest-agent/ovirt-guest-agent.py", line 132, in ?
agent.run(daemon, pidfile)
File "/usr/share/ovirt-guest-agent/ovirt-guest-agent.py", line 63, in run
self.agent = LinuxVdsAgent(config)
File "/usr/share/ovirt-guest-agent/GuestAgentLinux2.py", line 371, in
__init__
AgentLogicBase.__init__(self, config)
File "/usr/share/ovirt-guest-agent/OVirtAgentLogic.py", line 171, in
__init__
self.vio = VirtIoChannel(config.get("virtio", "device"))
File "/usr/share/ovirt-guest-agent/VirtIoChannel.py", line 150, in
__init__
self._stream = VirtIoStream(vport_name)
File "/usr/share/ovirt-guest-agent/VirtIoChannel.py", line 131, in
__init__
self._vport = os.open(vport_name, os.O_RDWR)
OSError: [Errno 2] No such file or directory:
'/dev/virtio-ports/com.redhat.rhevm.vdsm'
Thanks
6 years
[Users] oVirt Workshop at LinuxCon Japan 2012
by Leslie Hawthorn
Hello everyone,
As part of our efforts to raise awareness of and educate more developers
about the oVirt project, we will be holding an oVirt workshop at
LinuxCon Japan, taking place on June 8, 2012. You can find full details
of the workshop agenda on the LinuxCon Japan site. [0]
Registration for the workshop is now open and is free of charge for the
first 50 participants. We will also look at adding additional
participant slots to the workshop based on demand.
Attendees who register for LinuxCon Japan via the workshop registration
link [1] will also be eligible for a discount on their LinuxCon Japan
registration.
Please spread the word to folks you think would find the workshop
useful. If they have already registered for LinuxCon Japan, they can
simply edit their existing registration to include the workshop.
[0] -
https://events.linuxfoundation.org/events/linuxcon-japan/ovirt-gluster-wo...
[1] - http://www.regonline.com/Register/Checkin.aspx?EventID=1099949
Cheers,
LH
--
Leslie Hawthorn
Community Action and Impact
Open Source and Standards @ Red Hat
identi.ca/lh
twitter.com/lhawthorn
6 years
[Users] Moving iSCSI Master Data
by rni＠chef.net
--========GMXBoundary282021374122634158505
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 8bit
Hi,
it's me again....
I started my oVirt 'project' as a proof of concept,.. but it happend as always, it became production
Now, I've to move the iSCSI Master data to the real iSCSI traget.
Is there any way to do this, and to become rid of the old Master Data?
Thank you for your help
Hans-Joachim
--========GMXBoundary282021374122634158505
Content-Type: text/html; charset="utf-8"
Content-Transfer-Encoding: quoted-printable
<span style=3D'font-family:Verdana'><span style=3D'font-size:12px'>Hi,<br /=
><br />it's me again....<br /><br />I started my oVirt 'project' as a proof=
of concept,.. but it happend as always, it became production <img alt=
=3D" " title=3D" " src=3D"http://images.gmx.com/images/outsource/applicatio=
n/mailclient/mailcom/resource/mailclient/icons/blue/emoticons/animated/S_02=
-516742918.gif" /><br /><br />Now, I've to move the iSCSI Master data to th=
e real iSCSI traget.<br />Is there any way to do this, and to become rid of=
the old Master Data?<br /><br /><span id=3D"editor_signature">Thank you fo=
r your help</span><br /><br />Hans-Joachim</span></span>
--========GMXBoundary282021374122634158505--
6 years
[Users] Can't access RHEV-H aka ovirt-node
by Scotto Alberto
--_004_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_
Content-Type: multipart/alternative;
boundary="_000_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_"
--_000_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
Hi all,
I can't login to the hypervisor, neither as root nor as admin, neither from=
another computer via ssh nor directly on the machine.
I'm sure I remember the passwords. This is not the first time it happens: l=
ast time I reinstalled the host. Everything worked ok for about 2 weeks, an=
d then...
What's going on? Is it a known behavior, somehow?
Before rebooting the hypervisor, I would like to try something. RHEV Manage=
r talks to RHEV-H without any problems. Can I login with RHEV-M's keys? how=
?
Thank you all.
Alberto Scotto
[Blue]
Via Cardinal Massaia, 83
10147 - Torino - ITALY
phone: +39 011 29100
al.scotto(a)reply.it
www.reply.it
________________________________
--
The information transmitted is intended for the person or entity to which i=
t is addressed and may contain confidential and/or privileged material. Any=
review, retransmission, dissemination or other use of, or taking of any ac=
tion in reliance upon, this information by persons or entities other than t=
he intended recipient is prohibited. If you received this in error, please =
contact the sender and delete the material from any computer.
--_000_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_
Content-Type: text/html; charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
<html>
<head>
<meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"=
>
<style>
<!--
@font-face
{font-family:Calibri}
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0cm;
margin-bottom:.0001pt;
font-size:11.0pt;
font-family:"Calibri","sans-serif"}
a:link, span.MsoHyperlink
{color:blue;
text-decoration:underline}
a:visited, span.MsoHyperlinkFollowed
{color:purple;
text-decoration:underline}
span.EmailStyle17
{font-family:"Calibri","sans-serif";
color:windowtext}
.MsoChpDefault
{font-family:"Calibri","sans-serif"}
@page WordSection1
{margin:70.85pt 2.0cm 2.0cm 2.0cm}
div.WordSection1
{}
-->
</style>
</head>
<body lang=3D"IT" link=3D"blue" vlink=3D"purple">
<div class=3D"WordSection1">
<p class=3D"MsoNormal"><span lang=3D"EN-US">Hi all,</span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-US">I can’t login to the hype=
rvisor, neither as root nor as admin, neither from another computer via ssh=
nor directly on the machine.</span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-US">I’m sure I remember the p=
asswords. This is not the first time it happens: last time I reinstalled th=
e host. Everything worked ok for about 2 weeks, and then...</span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-US">What’s going on? Is it a =
known behavior, somehow?</span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-US">Before rebooting the hypervisor=
, I would like to try something. RHEV Manager talks to RHEV-H without any p=
roblems. Can I login with RHEV-M’s keys? how?</span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-US"> </span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-US">Thank you all.</span></p>
</div>
<br>
<br>
<div align=3D"left">
<p style=3D"font-family:Calibri,Sans-Serif; font-size:10pt"><span style=3D"=
color:#000000; font-weight:bold">Alberto Scotto</span>
<span style=3D"color:#808080"></span><br>
<br>
<span style=3D"color:#000000"><img border=3D"0" alt=3D"Blue" src=3D"cid:bde=
5ac62d10545908e269a6006dbd5ac" style=3D"margin:0px">
</span><br>
<span style=3D"color:#808080">Via Cardinal Massaia, 83<br>
10147 - Torino - ITALY <br>
phone: +39 011 29100 <br>
<a href=3D"al.scotto(a)reply.it" target=3D"" style=3D"color:blue; text-decora=
tion:underline">al.scotto(a)reply.it</a>
<br>
<a title=3D"" href=3D"www.reply.it" target=3D"" style=3D"color:blue; text-d=
ecoration:underline">www.reply.it</a>
</span><br>
</p>
</div>
<br>
<hr>
<font face=3D"Arial" color=3D"Gray" size=3D"1"><br>
--<br>
The information transmitted is intended for the person or entity to which i=
t is addressed and may contain confidential and/or privileged material. Any=
review, retransmission, dissemination or other use of, or taking of any ac=
tion in reliance upon, this information
by persons or entities other than the intended recipient is prohibited. If=
you received this in error, please contact the sender and delete the mater=
ial from any computer.<br>
</font>
</body>
</html>
--_000_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_--
--_004_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_
Content-Type: image/png; name="blue.png"
Content-Description: blue.png
Content-Disposition: inline; filename="blue.png"; size=2834;
creation-date="Tue, 11 Sep 2012 14:14:44 GMT";
modification-date="Tue, 11 Sep 2012 14:14:44 GMT"
Content-ID: <bde5ac62d10545908e269a6006dbd5ac>
Content-Transfer-Encoding: base64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--_004_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_--
6 years, 1 month
Unable to make Single Sign on working on Windows 7 Guest
by Felipe Herrera Martinez
On the case I'll be able to create an installer, what is the name of the Application need to be there, in order to ovirt detects that Ovirt Guest agent is installed?
I have created an installer adding OvirtGuestService files and the Product Name to be shown, a part of the command line post installs..
I have tried with "ovirt-guest-agent" and "Ovirt guest agent" Names for the application installed on Windows 7 guest and even both are presented on ovirt VM Applications tab,
on any case LogonVDScommand appears.
There is other option to make it work now?
Thanks in advance,
Felipe
6 years, 1 month
Re: [ovirt-users] Need VM run once api
by Chandrahasa S
This is a multipart message in MIME format.
--=_alternative 00199D2865257E91_=
Content-Type: text/plain; charset="US-ASCII"
Can any one help on this.
Thanks & Regards
Chandrahasa S
From: Chandrahasa S/MUM/TCS
To: users(a)ovirt.org
Date: 28-07-2015 15:20
Subject: Need VM run once api
Hi Experts,
We are integrating ovirt with our internal cloud.
Here we installed cloudinit in vm and then converted vm to template. We
deploy template with initial run parameter Hostname, IP Address, Gateway
and DNS.
but when we power ON initial, run parameter is not getting pushed to
inside the vm. But its working when we power on VM using run once option
on Ovirt portal.
I believe we need to power ON vm using run once API, but we are not able
get this API.
Can some one help on this.
I got reply on this query last time but unfortunately mail got deleted.
Thanks & Regards
Chandrahasa S
=====-----=====-----=====
Notice: The information contained in this e-mail
message and/or attachments to it may contain
confidential or privileged information. If you are
not the intended recipient, any dissemination, use,
review, distribution, printing or copying of the
information contained in this e-mail message
and/or attachments to it are strictly prohibited. If
you have received this communication in error,
please notify us by reply e-mail or telephone and
immediately and permanently delete the message
and any attachments. Thank you
--=_alternative 00199D2865257E91_=
Content-Type: text/html; charset="US-ASCII"
<font size=2 face="sans-serif">Can any one help on this.</font>
<br>
<br><font size=2 face="sans-serif">Thanks & Regards<br>
Chandrahasa S<br>
</font>
<br>
<br>
<br>
<br><font size=1 color=#5f5f5f face="sans-serif">From:
</font><font size=1 face="sans-serif">Chandrahasa S/MUM/TCS</font>
<br><font size=1 color=#5f5f5f face="sans-serif">To:
</font><font size=1 face="sans-serif">users(a)ovirt.org</font>
<br><font size=1 color=#5f5f5f face="sans-serif">Date:
</font><font size=1 face="sans-serif">28-07-2015 15:20</font>
<br><font size=1 color=#5f5f5f face="sans-serif">Subject:
</font><font size=1 face="sans-serif">Need VM run
once api</font>
<br>
<hr noshade>
<br>
<br><font size=2 face="sans-serif">Hi Experts,</font>
<br>
<br><font size=2 face="sans-serif">We are integrating ovirt with our internal
cloud.</font>
<br>
<br><font size=2 face="sans-serif">Here we installed cloudinit in vm and
then converted vm to template. We deploy template with initial run parameter
Hostname, IP Address, Gateway and DNS.</font>
<br>
<br><font size=2 face="sans-serif">but when we power ON initial, run parameter
is not getting pushed to inside the vm. But its working when we power on
VM using run once option on Ovirt portal.</font>
<br>
<br><font size=2 face="sans-serif">I believe we need to power ON vm using
run once API, but we are not able get this API.</font>
<br>
<br><font size=2 face="sans-serif">Can some one help on this.</font>
<br>
<br><font size=2 face="sans-serif">I got reply on this query last time
but unfortunately mail got deleted.</font>
<br>
<br><font size=2 face="sans-serif">Thanks & Regards<br>
Chandrahasa S<br>
</font>
<br><p>=====-----=====-----=====<br>
Notice: The information contained in this e-mail<br>
message and/or attachments to it may contain <br>
confidential or privileged information. If you are <br>
not the intended recipient, any dissemination, use, <br>
review, distribution, printing or copying of the <br>
information contained in this e-mail message <br>
and/or attachments to it are strictly prohibited. If <br>
you have received this communication in error, <br>
please notify us by reply e-mail or telephone and <br>
immediately and permanently delete the message <br>
and any attachments. Thank you</p>
<p></p>
--=_alternative 00199D2865257E91_=--
6 years, 1 month
Re: [ovirt-users] Problem Windows guests start in pause
by Dafna Ron
Hi Lucas,
Please send mails to the list next time.
can you please do rpm -qa |grep qemu.
also, can you try a different windows image?
Thanks,
Dafna
On 07/14/2014 02:03 PM, lucas castro wrote:
> On the host there I've tried to run the vm, I use a centOS 6.5
> and checked, no update for qemu, libvirt or related package.
--
Dafna Ron
6 years, 1 month
Feature: Hosted engine VM management
by Roy Golan
Hi all,
Upcoming in 3.6 is enhancement for managing the hosted engine VM.
In short, we want to:
* Allow editing the Hosted engine VM, storage domain, disks, networks etc
* Have a shared configuration for the hosted engine VM
* Have a backup for the hosted engine VM configuration
please review and comment on the wiki below:
http://www.ovirt.org/Hosted_engine_VM_management
Thanks,
Roy
6 years, 2 months
Re: [ovirt-users] Large DWH Database, how to empty
by Matt .
Hi,
OK thanks! I saw that after upgrading to 4.0.5 from 4.0.4 the DB
already dropped with around 500MB directly and is now at 2GB smaller.
Does this sounds familiar to you with other settings in 4.0.5 ?
Thanks,
Matt
2017-01-08 10:45 GMT+01:00 Shirly Radco <sradco(a)redhat.com>:
> No. That will corrupt your database.
>
> Are you using the full dwh or the smaller version for the dashboards?
>
> Please set the delete thresholds to save less data and the data older then
> the time you set will be deleted.
> Add a file to /ovirt-engine-dwhd.conf.d/
> update_time_to_keep_records.conf
>
> Add these lines with the new configurations. The numbers represent the hours
> to keep the data.
>
> DWH_TABLES_KEEP_SAMPLES=24
> DWH_TABLES_KEEP_HOURLY=1440
> DWH_TABLES_KEEP_DAILY=43800
>
>
> These are the configurations for a full dwh.
>
> The smaller version configurations are:
> DWH_TABLES_KEEP_SAMPLES=24
> DWH_TABLES_KEEP_HOURLY=720
> DWH_TABLES_KEEP_DAILY=0
>
> The delete process by default at 3am every day (DWH_DELETE_JOB_HOUR=3)
>
> Best regards,
>
> Shirly Radco
>
> BI Software Engineer
> Red Hat Israel Ltd.
> 34 Jerusalem Road
> Building A, 4th floor
> Ra'anana, Israel 4350109
>
>
> On Fri, Jan 6, 2017 at 6:35 PM, Matt . <yamakasi.014(a)gmail.com> wrote:
>>
>> Hi,
>>
>> I seem to have some large database for the DWH logging and I wonder
>> how I can empty it safely.
>>
>> Can I just simply empty the database ?
>>
>> Have a good weekend!
>>
>> Cheers,
>>
>> Matt
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>
>
6 years, 2 months
Re: [ovirt-users] Packet loss
by Doron Fediuck
----_com.android.email_640187878761650
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: base64
SGkgS3lsZSzCoApXZSBtYXkgaGF2ZSBzZWVuIHNvbWV0aGluZyBzaW1pbGFyIGluIHRoZSBwYXN0
IGJ1dCBJIHRoaW5rIHRoZXJlIHdlcmUgdmxhbnMgaW52b2x2ZWQuwqAKSXMgaXQgdGhlIHNhbWUg
Zm9yIHlvdT/CoApUb255IC8gRGFuLCBkb2VzIGl0IHJpbmcgYSBiZWxsP8Kg
----_com.android.email_640187878761650
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: base64
PGh0bWw+PGhlYWQ+PG1ldGEgaHR0cC1lcXVpdj0iQ29udGVudC1UeXBlIiBjb250ZW50PSJ0ZXh0
L2h0bWw7IGNoYXJzZXQ9VVRGLTgiPjwvaGVhZD48Ym9keSA+PGRpdj5IaSBLeWxlLCZuYnNwOzwv
ZGl2PjxkaXY+V2UgbWF5IGhhdmUgc2VlbiBzb21ldGhpbmcgc2ltaWxhciBpbiB0aGUgcGFzdCBi
dXQgSSB0aGluayB0aGVyZSB3ZXJlIHZsYW5zIGludm9sdmVkLiZuYnNwOzwvZGl2PjxkaXY+SXMg
aXQgdGhlIHNhbWUgZm9yIHlvdT8mbmJzcDs8L2Rpdj48ZGl2PlRvbnkgLyBEYW4sIGRvZXMgaXQg
cmluZyBhIGJlbGw/Jm5ic3A7PC9kaXY+PC9ib2R5PjwvaHRtbD4=
----_com.android.email_640187878761650--
6 years, 2 months
Backup & Restore
by suporte＠logicworks.pt
------=_Part_20329569_1409874801.1519819859027
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: 7bit
Hi,
I'm testing backup & restore on Ovirt 4.2.
I follow this doc https://www.ovirt.org/documentation/admin-guide/chap-Backups_and_Migration/
Try to restore to a fresh installation but always get this error message:
restore-permissions
Preparing to restore:
- Unpacking file 'back_file'
Restoring:
- Files
Provisioning PostgreSQL users/databases:
- user 'engine', database 'engine'
Restoring:
FATAL: Can't connect to database 'ovirt_engine_history'. Please see '/usr/bin/engine-backup --help'.
On the live engine I run # engine-backup --scope=all --mode=backup --file=file_name --log=log_file_name
And try to restore on a fresh installation:
# engine-backup --mode=restore --file=file_name --log=log_file_name --provision-db --restore-permissions
Any Idea?
Thanks
--
Jose Ferradeira
http://www.logicworks.pt
------=_Part_20329569_1409874801.1519819859027
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: quoted-printable
<html><body><div style=3D"font-family: trebuchet ms,sans-serif; font-size: =
12pt; color: #000000"><div data-marker=3D"__QUOTED_TEXT__"><div style=3D"fo=
nt-family: Times New Roman; font-size: 10pt; color: #000000;" data-mce-styl=
e=3D"font-family: Times New Roman; font-size: 10pt; color: #000000;"><div>H=
i,<br></div><br><div><span style=3D"font-size: 11pt; font-family: terminal,=
monaco;" data-mce-style=3D"font-size: 11pt; font-family: terminal, monaco;=
">I'm testing backup & restore on Ovirt 4.2.</span><br></div><div><span=
style=3D"font-size: 11pt; font-family: terminal, monaco;" data-mce-style=
=3D"font-size: 11pt; font-family: terminal, monaco;">I follow this doc http=
s://www.ovirt.org/documentation/admin-guide/chap-Backups_and_Migration/</sp=
an><br></div><div><span style=3D"font-size: 11pt; font-family: terminal, mo=
naco;" data-mce-style=3D"font-size: 11pt; font-family: terminal, monaco;">T=
ry to restore to a fresh installation but always get this error message:</s=
pan><br></div><br><div><span style=3D"font-size: 11pt; font-family: termina=
l, monaco;" data-mce-style=3D"font-size: 11pt; font-family: terminal, monac=
o;">restore-permissions</span><br><span style=3D"font-size: 11pt; font-fami=
ly: terminal, monaco;" data-mce-style=3D"font-size: 11pt; font-family: term=
inal, monaco;">Preparing to restore:</span><br><span style=3D"font-size: 11=
pt; font-family: terminal, monaco;" data-mce-style=3D"font-size: 11pt; font=
-family: terminal, monaco;">- Unpacking file 'back_file'</span><br><span st=
yle=3D"font-size: 11pt; font-family: terminal, monaco;" data-mce-style=3D"f=
ont-size: 11pt; font-family: terminal, monaco;">Restoring:</span><br><span =
style=3D"font-size: 11pt; font-family: terminal, monaco;" data-mce-style=3D=
"font-size: 11pt; font-family: terminal, monaco;">- Files</span><br><span s=
tyle=3D"font-size: 11pt; font-family: terminal, monaco;" data-mce-style=3D"=
font-size: 11pt; font-family: terminal, monaco;">Provisioning PostgreSQL us=
ers/databases:</span><br><span style=3D"font-size: 11pt; font-family: termi=
nal, monaco;" data-mce-style=3D"font-size: 11pt; font-family: terminal, mon=
aco;">- user 'engine', database 'engine'</span><br><span style=3D"font-size=
: 11pt; font-family: terminal, monaco;" data-mce-style=3D"font-size: 11pt; =
font-family: terminal, monaco;">Restoring:</span><br><span style=3D"font-si=
ze: 11pt; font-family: terminal, monaco;" data-mce-style=3D"font-size: 11pt=
; font-family: terminal, monaco;">FATAL: Can't connect to database 'ovirt_e=
ngine_history'. Please see '/usr/bin/engine-backup --help'.</span><br></div=
><br><div><span style=3D"font-size: 11pt; font-family: terminal, monaco;" d=
ata-mce-style=3D"font-size: 11pt; font-family: terminal, monaco;">On the li=
ve engine I run # engine-backup --scope=3Dall --mode=3Dbackup --file=
=3Dfile_name --log=3Dlog_file_name</span></div><div><span style=3D"font-siz=
e: 11pt; font-family: terminal, monaco;" data-mce-style=3D"font-size: 11pt;=
font-family: terminal, monaco;"><br data-mce-bogus=3D"1"></span></div><div=
><span style=3D"font-size: 11pt; font-family: terminal, monaco;" data-mce-s=
tyle=3D"font-size: 11pt; font-family: terminal, monaco;">And try to restore=
on a fresh installation:</span><br></div><div><span style=3D"font-size: 11=
pt; font-family: terminal, monaco;" data-mce-style=3D"font-size: 11pt; font=
-family: terminal, monaco;"># engine-backup --mode=3Drestore --file=3Dfile_=
name --log=3Dlog_file_name --provision-db --restore-permissions</span></div=
><div><span style=3D"font-size: 11pt; font-family: terminal, monaco;" data-=
mce-style=3D"font-size: 11pt; font-family: terminal, monaco;"><br data-mce-=
bogus=3D"1"></span></div><div><span style=3D"font-size: 11pt; font-family: =
terminal, monaco;" data-mce-style=3D"font-size: 11pt; font-family: terminal=
, monaco;">Any Idea?<br data-mce-bogus=3D"1"></span></div><div><span style=
=3D"font-size: 11pt; font-family: terminal, monaco;" data-mce-style=3D"font=
-size: 11pt; font-family: terminal, monaco;"><br data-mce-bogus=3D"1"></spa=
n></div><div><span style=3D"font-size: 11pt; font-family: terminal, monaco;=
" data-mce-style=3D"font-size: 11pt; font-family: terminal, monaco;">Thanks=
<br data-mce-bogus=3D"1"></span></div><div><span style=3D"font-size: 11pt; =
font-family: terminal, monaco;" data-mce-style=3D"font-size: 11pt; font-fam=
ily: terminal, monaco;"><br data-mce-bogus=3D"1"></span></div><div><span st=
yle=3D"font-size: 11pt; font-family: terminal, monaco;" data-mce-style=3D"f=
ont-size: 11pt; font-family: terminal, monaco;"><br data-mce-bogus=3D"1"></=
span></div><br><div>-- <br></div><div><hr style=3D"width: 100%; height: 2px=
;" data-mce-style=3D"width: 100%; height: 2px;">Jose Ferradeira<br>http://w=
ww.logicworks.pt</div></div><br></div></div></body></html>
------=_Part_20329569_1409874801.1519819859027--
6 years, 4 months
Error installing ovirt node
by Junaid Jadoon
Dear All,
I have Ovirt engine 4.2 and node version is 4.2.
After installing node in in ovirt engine when i try to install node it
gives following error
14:25:37,410+05 ERROR
[org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand]
(EE-ManagedThreadFactory-engine-Thread-19) [52669850] Host installation
failed for host 'bd8d007a-be92-4075-bba9-6cbeb890a1e5', 'node_2': Command
returned failure code 1 during SSH session 'root(a)192.168.20.20'
2018-02-27 14:25:37,416+05 INFO
[org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand]
(EE-ManagedThreadFactory-engine-Thread-19) [52669850] START,
SetVdsStatusVDSCommand(HostName = node_2,
SetVdsStatusVDSCommandParameters:{hostId='bd8d007a-be92-4075-bba9-6cbeb890a1e5',
status='InstallFailed', nonOperationalReason='NONE',
stopSpmFailureLogged='false', maintenanceReason='null'}), log id: 2b138e87
2018-02-27 14:25:37,423+05 INFO
[org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand]
(EE-ManagedThreadFactory-engine-Thread-19) [52669850] FINISH,
SetVdsStatusVDSCommand, log id: 2b138e87
2018-02-27 14:25:37,429+05 ERROR
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(EE-ManagedThreadFactory-engine-Thread-19) [52669850] EVENT_ID:
VDS_INSTALL_FAILED(505), Host node_2 installation failed. Command returned
failure code 1 during SSH session 'root(a)192.168.20.20'.
2018-02-27 14:25:37,433+05 INFO
[org.ovirt.engine.core.bll.hostdeploy.InstallVdsInternalCommand]
(EE-ManagedThreadFactory-engine-Thread-19) [52669850] Lock freed to object
'EngineLock:{exclusiveLocks='[bd8d007a-be92-4075-bba9-6cbeb890a1e5=VDS]',
sharedLocks=''}'
I have attached log file for your reference
Please help me out.
6 years, 7 months
Unable to backend oVirt with Cinder
by Logan Kuhn
------=_Part_51316288_608143832.1472587678781
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: 7bit
I've got Cinder configured and pointed at Ceph for it's back end storage. I can run ceph commands on the cinder machine and cinder is configured for noauth and I've also tried it with Keystone for auth. I can run various cinder commands and it'll return as expected.
When I configure it in oVirt it'll add the external provider fine, but when I go to create a disk it doesn't populate the volume type field, it's just empty. The corresponding command for cinder: cinder type-list and cinder type-show <name> returns fine and it is public.
Ovirt and Cinder are on the same host so it isn't a firewall issue.
Cinder config:
[DEFAULT]
rpc_backend = rabbit
#auth_strategy = keystone
auth_strategy = noauth
enabled_backends = ceph
#glance_api_servers = http://10.128.7.252:9292
#glance_api_version = 2
#[keystone_authtoken]
#auth_uri = http://10.128.7.252:5000/v3
#auth_url = http://10.128.7.252:35357/v3
#auth_type = password
#memcached_servers = localhost:11211
#project_domain_name = default
#user_domain_name = default
#project_name = services
#username = user
#password = pass
[ceph]
volume_driver = cinder.volume.drivers.rbd.RBDDriver
volume_backend_name = ceph
rbd_pool = ovirt-images
rbd_user = cinder
rbd_secret_uuid = <secret>
rbd_ceph_conf = /etc/ceph/ceph.conf
rbd_flatten_volume_from_snapshot = true
rbd_max_clone_depth = 5
rbd_store_chunk_size = 4
rados_connect_timeout = -1
#glance_api_version = 2
[database]
connection = postgresql://user:pass@10.128.2.33/cinder
[oslo_concurrency]
lock_path = /var/lib/cinder/tmp
[oslo_messaging_rabbit]
rabbit_host = localhost
rabbit_port = 5672
rabbit_userid = user
rabbit_password = pass
Regards,
Logan
------=_Part_51316288_608143832.1472587678781
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: quoted-printable
<html><body><div style=3D"font-family: Arial; font-size: 12pt; color: #0000=
00"><div>I've got Cinder configured and pointed at Ceph for it's back end s=
torage. I can run ceph commands on the cinder machine and cinder is c=
onfigured for noauth and I've also tried it with Keystone for auth. I=
can run various cinder commands and it'll return as expected. </=
div><div><br data-mce-bogus=3D"1"></div><div>When I configure it in oVirt i=
t'll add the external provider fine, but when I go to create a disk it does=
n't populate the volume type field, it's just empty. The correspondin=
g command for cinder: cinder type-list and cinder type-show <name> re=
turns fine and it is public. </div><div><br data-mce-bogus=3D"1"></div=
><div>Ovirt and Cinder are on the same host so it isn't a firewall issue.</=
div><div><br data-mce-bogus=3D"1"></div><div>Cinder config:</div><div>[DEFA=
ULT]<br>rpc_backend =3D rabbit<br>#auth_strategy =3D keystone<br>auth_strat=
egy =3D noauth<br>enabled_backends =3D ceph<br>#glance_api_servers =3D http=
://10.128.7.252:9292<br>#glance_api_version =3D 2<br><br>#[keystone_authtok=
en]<br>#auth_uri =3D http://10.128.7.252:5000/v3<br>#auth_url =3D http://10=
.128.7.252:35357/v3<br>#auth_type =3D password<br>#memcached_servers =3D lo=
calhost:11211<br>#project_domain_name =3D default<br>#user_domain_name =3D =
default<br>#project_name =3D services<br>#username =3D user<br>#passwo=
rd =3D pass<br><br>[ceph]<br>volume_driver =3D cinder.volume.drivers.rbd.RB=
DDriver<br>volume_backend_name =3D ceph<br>rbd_pool =3D ovirt-images<br>rbd=
_user =3D cinder<br>rbd_secret_uuid =3D <secret><br>rbd_ceph_con=
f =3D /etc/ceph/ceph.conf<br>rbd_flatten_volume_from_snapshot =3D true<br>r=
bd_max_clone_depth =3D 5<br>rbd_store_chunk_size =3D 4<br>rados_connect_tim=
eout =3D -1<br>#glance_api_version =3D 2<br><br>[database]<br>connection =
=3D postgresql://user:pass@10.128.2.33/cinder<br><br>[oslo_concurrency]<br>=
lock_path =3D /var/lib/cinder/tmp<br><br>[oslo_messaging_rabbit]<br>rabbit_=
host =3D localhost<br>rabbit_port =3D 5672<br>rabbit_userid =3D <span =
style=3D"color: #000000; font-family: Arial; font-size: 16px; font-style: n=
ormal; font-variant-ligatures: normal; font-variant-caps: normal; font-weig=
ht: normal; letter-spacing: normal; line-height: normal; orphans: 2; text-a=
lign: start; text-indent: 0px; text-transform: none; white-space: normal; w=
idows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; display: inlin=
e !important; float: none; background-color: #ffffff;" data-mce-style=3D"co=
lor: #000000; font-family: Arial; font-size: 16px; font-style: normal; font=
-variant-ligatures: normal; font-variant-caps: normal; font-weight: normal;=
letter-spacing: normal; line-height: normal; orphans: 2; text-align: start=
; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; w=
ord-spacing: 0px; -webkit-text-stroke-width: 0px; display: inline !importan=
t; float: none; background-color: #ffffff;">user</span><br>rabbit_password =
=3D <span style=3D"color: #000000; font-family: Arial; font-size: 16px=
; font-style: normal; font-variant-ligatures: normal; font-variant-caps: no=
rmal; font-weight: normal; letter-spacing: normal; line-height: normal; orp=
hans: 2; text-align: start; text-indent: 0px; text-transform: none; white-s=
pace: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px;=
display: inline !important; float: none; background-color: #ffffff;" data-=
mce-style=3D"color: #000000; font-family: Arial; font-size: 16px; font-styl=
e: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-=
weight: normal; letter-spacing: normal; line-height: normal; orphans: 2; te=
xt-align: start; text-indent: 0px; text-transform: none; white-space: norma=
l; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; display: i=
nline !important; float: none; background-color: #ffffff;">pass</span></div=
><div><br></div><div data-marker=3D"__SIG_PRE__">Regards,<br>Logan</div></d=
iv></body></html>
------=_Part_51316288_608143832.1472587678781--
6 years, 10 months
Mailing-Lists upgrade
by Marc Dequènes (Duck)
This is an OpenPGP/MIME signed message (RFC 4880 and 3156)
--IfGqXrbgT9wNNdIsvS8kI8WdhEQHlgkiq
Content-Type: multipart/mixed; boundary="AUFHCWPQQknM84fF2kF4uGjIv4blC9bMv";
protected-headers="v1"
From: =?UTF-8?B?TWFyYyBEZXF1w6huZXMgKER1Y2sp?= <duck(a)redhat.com>
To: oVirt Infra <infra(a)ovirt.org>, users <users(a)ovirt.org>,
devel <devel(a)ovirt.org>
Message-ID: <c5c71fce-0290-e97a-ddd0-eab0e6fccea4(a)redhat.com>
Subject: Mailing-Lists upgrade
--AUFHCWPQQknM84fF2kF4uGjIv4blC9bMv
Content-Type: text/plain; charset=utf-8
Content-Language: en-US
Content-Transfer-Encoding: quoted-printable
Quack,
On behalf of the oVirt infra team, I'd like to announce the current
Mailing-Lists system is going to be upgraded to a brand new Mailman 3
installation on Monday during the slot 11:00-12:00 JST.
It should not take a full hour to migrate as we already made incremental
synchronization with the current system but better keep some margin. The
system will then take over delivery of the mails but might be a bit slow
at first as it needs to reindex all the archived mails (which might take
a few hours).
To manage your subscriptions and delivery settings you can do this
easily on the much nicer web interface (https://lists.ovirt.org). There
is a notion of account so you don't need to login separately for each ML.=
You can Sign In using Fedora, GitHub or Google or create a local account
if you prefer. Please keep in mind signing in with a different method
would create separate accounts (which cannot be merged at the moment).
But you can easily link your account to other authentication methods in
your settings (click on you name in the up-right corner -> Account ->
Account Connections).
As for the original mail archives, because the previous system did not
have stable URLs, we cannot create mappings to the new pages. We decided
to keep the old archives around on the same URL (/pipermail), so the
Internet links would still work fine.
Hope you'd be happy with the new system.
\_o<
--AUFHCWPQQknM84fF2kF4uGjIv4blC9bMv--
--IfGqXrbgT9wNNdIsvS8kI8WdhEQHlgkiq
Content-Type: application/pgp-signature; name="signature.asc"
Content-Description: OpenPGP digital signature
Content-Disposition: attachment; filename="signature.asc"
-----BEGIN PGP SIGNATURE-----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=l6uN
-----END PGP SIGNATURE-----
--IfGqXrbgT9wNNdIsvS8kI8WdhEQHlgkiq--
7 years
vdsClient is removed and replaced by vdsm-client
by Irit Goihman
Hi All,
vdsClient will be removed from master branch today.
It is using XMLRPC protocol which has been deprecated and replaced by
JSON-RPC.
A new client for vdsm was introduced in 4.1: vdsm-client.
This is a simple client that uses JSON-RPC protocol which was introduced in
ovirt 3.5.
The client is not aware of the available methods and parameters, and you
should consult
the schema [1] in order to construct the desired command.
Future version should parse the schema and provide online help.
If you're using vdsClient, we will be happy to assist you in migrating to
the new vdsm client.
*vdsm-client usage:*
vdsm-client [-h] [-a ADDRESS] [-p PORT] [--unsecure] [--timeout TIMEOUT]
[-f FILE] namespace method [name=value [name=value] ...]
Invoking simple methods:
# vdsm-client Host getVMList
['b3f6fa00-b315-4ad4-8108-f73da817b5c5']
For invoking methods with many or complex parameters, you can read
the parameters from a JSON format file:
# vdsm-client Lease info -f lease.json
where lease.json file content is:
{
"lease": {
"sd_id": "75ab40e3-06b1-4a54-a825-2df7a40b93b2",
"lease_id": "b3f6fa00-b315-4ad4-8108-f73da817b5c5"
}
}
It is also possible to read parameters from standard input, creating
complex parameters interactively:
# cat <<EOF | vdsm-client Lease info -f -
{
"lease": {
"sd_id": "75ab40e3-06b1-4a54-a825-2df7a40b93b2",
"lease_id": "b3f6fa00-b315-4ad4-8108-f73da817b5c5"
}
}
EOF
*Constructing a command from vdsm schema:*
Let's take VM.getStats as an example.
This is the entry in the schema:
VM.getStats:
added: '3.1'
description: Get statistics about a running virtual machine.
params:
- description: The UUID of the VM
name: vmID
type: *UUID
return:
description: An array containing a single VmStats record
type:
- *VmStats
namespace: VM
method name: getStats
params: vmID
The vdsm-client command is:
# vdsm-client VM getStats vmID=b3f6fa00-b315-4ad4-8108-f73da817b5c5
*Invoking getVdsCaps command:*
# vdsm-client Host getCapabilities
Please consult vdsm-client help and man page for further details and
options.
[1] https://github.com/oVirt/vdsm/blob/master/lib/api/vdsm-api.yml
--
Irit Goihman
Software Engineer
Red Hat Israel Ltd.
7 years
Passing VLAN trunk to VM
by Simon Vincent
Is it possible to pass multiple VLANs to a VM (pfSense) using a single
virtual NIC? All my existing oVirt networks are setup as a single tagged
VLAN. I know this didn't used to be supported but wondered if this has
changed. My other option is to pass each VLAN as a separate NIC to the VM
however if I needed to add a new VLAN I would have to add a new interface
and reboot the VM as hot-add of NICs is not supported by pfSense.
7 years, 1 month
Can't add/remove usb device to VM
by Jon bae
Hello,
I run oVirt 4.2.1, in 4.1 I added a USB device to a VM and now I wanted to
change this device to a different VM.
But I found out, that I'm not able to remove this device nor I'm able to
add any device to any VM. The device list is empty.
I found a bug report, what describe this error:
https://bugzilla.redhat.com/show_bug.cgi?id=1531847
Is there a solution for that?
The USB device is a hardware dongle and it is very impotent for us to
change this.
Any workaround is welcome!
Regards
Jonathan
7 years, 1 month
VDSM SSL validity
by Punaatua PAINT-KOUI
Hi,
I setup an hyperconverged solution with 3 nodes, hosted engine on glusterfs.
We run this setup in a PCI-DSS environment. According to PCI-DSS
requirements, we are required to reduce the validity of any certificate
under 39 months.
I saw in this link
https://www.ovirt.org/develop/release-management/features/infra/pki/ that i
can use the option VdsCertificateValidityInYears at engine-config.
I'm running ovirt engine 4.2.1 and i checked when i was on 4.2 how to edit
the option with engine-config --all and engine-config --list but the option
is not listed
Am i missing something ?
I thing i can regenerate a VDSM certificate with openssl and the CA conf in
/etc/pki/ovirt-engine on the hosted-engine but i would rather modifiy the
option for future host that I will add.
--
-------------------------------------
PAINT-KOUI Punaatua
7 years, 1 month
HostedEngine with HA
by Carlos Rodrigues
Hello,
I have one cluster with two hosts with power management correctly
configured and one virtual machine with HostedEngine over shared
storage with FiberChannel.
When i shutdown the network of host with HostedEngine VM, it should be
possible the HostedEngine VM migrate automatically to another host?
What is the expected behaviour on this HA scenario?
Regards,
--
Carlos Rodrigues
Engenheiro de Software Sénior
Eurotux Informática, S.A. | www.eurotux.com
(t) +351 253 680 300 (m) +351 911 926 110
7 years, 1 month
Ceph Cinder QoS
by Matteo Dacrema
Hi All,
I’m running a 4.2 cluster with all VMs on Ceph using cinder external provider.
I’m trying to limit IOPS with cinder qos and volume type but it doesn’t work.
VM xml doesn’t show anything about <iotune>
Is it expected to work or is not implemented yet?
Thank you
Matteo
7 years, 1 month
Failure to upgrade Cluster Compatibility Version
by Jonathan Mathews
I have been upgrading my oVirt platform from 3.4 and I am trying to get to
4.2.
I have managed to get the platform to 3.6, but need to upgrade the Cluster
Compatibility Version.
When I select 3.6 in the Cluster Compatibility Version and select OK, it
highlights Compatibility Version in red, (image attached).
There are no errors been displayed on screen, or in
the /var/log/ovirt-engine/engine.log file.
Please let me know if I am missing something and how I can resolve this?
Thanks
Jonathan
7 years, 1 month
Cannot activate storage domain
by Bruckner, Simone
--_000_2CB4E8C8E00E594EA06D4AC427E429920FE500D1fabamailserverf_
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
Hi all,
we run a small oVirt installation that we also use for automated testing =
(automatically creating, dropping vms).
We got an inactive FC storage domain that we cannot activate any more. We s=
ee several events at that time starting with:
VM perftest-c17 is down with error. Exit message: Unable to get volume size=
for domain b83c159c-4ad6-4613-ba16-bab95ccd10c0 volume 686376c1-4be1-44c3-=
89a3-0a8addc8fdf2.
Trying to activate the strorage domain results in the following alert event=
for each host:
VDSM <hostname> command GetVGInfoVDS failed: Volume Group does not exist: (=
u'vg_uuid: 813oRe-64r8-mloU-k9G2-LFsS-dXSG-hpN4kf',)
And after those messages from all hosts we get:
VDSM command ActivateStorageDomainVDS failed: Storage domain does not exist=
: (u'b83c159c-4ad6-4613-ba16-bab95ccd10c0',)
Failed to activate Storage Domain VMHOST_LUN_205 (Data Center Production) b=
y <user>
Invalid status on Data Center Production. Setting status to Non Responsive.
Storage Pool Manager runs on Host vmhost003.fabagl.fabasoft.com (Address: v=
mhost003.fabagl.fabasoft.com), Data Center Production.
Checking the hosts with multipath -ll we see the LUN without errors.
We run oVirt 4.2.1 on CentOS 7.4. Hosts are CentOS 7.4 hosts with oVirt ins=
talled using oVirt engine.
Hosts are connected to about 30 FC LUNs (8 TB each) on two all-flash storag=
e arrays.
Thank you,
Simone Bruckner
--_000_2CB4E8C8E00E594EA06D4AC427E429920FE500D1fabamailserverf_
Content-Type: text/html; charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
<html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr=
osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" =
xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:=
//www.w3.org/TR/REC-html40">
<head>
<meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"=
>
<meta name=3D"Generator" content=3D"Microsoft Word 15 (filtered medium)">
<style><!--
/* Font Definitions */
@font-face
{font-family:"Cambria Math";
panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0cm;
margin-bottom:.0001pt;
font-size:11.0pt;
font-family:"Calibri",sans-serif;
mso-fareast-language:EN-US;}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:#0563C1;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:#954F72;
text-decoration:underline;}
span.E-MailFormatvorlage17
{mso-style-type:personal-compose;
font-family:"Calibri",sans-serif;
color:windowtext;}
.MsoChpDefault
{mso-style-type:export-only;
font-family:"Calibri",sans-serif;
mso-fareast-language:EN-US;}
@page WordSection1
{size:612.0pt 792.0pt;
margin:70.85pt 70.85pt 2.0cm 70.85pt;}
div.WordSection1
{page:WordSection1;}
--></style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext=3D"edit" spidmax=3D"1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext=3D"edit">
<o:idmap v:ext=3D"edit" data=3D"1" />
</o:shapelayout></xml><![endif]-->
</head>
<body lang=3D"DE" link=3D"#0563C1" vlink=3D"#954F72">
<div class=3D"WordSection1">
<p class=3D"MsoNormal">Hi all,<o:p></o:p></p>
<p class=3D"MsoNormal"><o:p> </o:p></p>
<p class=3D"MsoNormal"><span lang=3D"EN-GB"> we run a small oVirt ins=
tallation that we also use for automated testing (automatically creating, d=
ropping vms).<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-GB"><o:p> </o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-GB">We got an inactive FC storage d=
omain that we cannot activate any more. We see several events at that time =
starting with:<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-GB"><o:p> </o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-GB">VM perftest-c17 is down with er=
ror. Exit message: Unable to get volume size for domain b83c159c-4ad6-4613-=
ba16-bab95ccd10c0 volume 686376c1-4be1-44c3-89a3-0a8addc8fdf2.<o:p></o:p></=
span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-GB"><o:p> </o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-GB">Trying to activate the strorage=
domain results in the following alert event for each host:<o:p></o:p></spa=
n></p>
<p class=3D"MsoNormal"><span lang=3D"EN-GB"><o:p> </o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-GB">VDSM <hostname> command G=
etVGInfoVDS failed: Volume Group does not exist: (u'vg_uuid: 813oRe-64r8-ml=
oU-k9G2-LFsS-dXSG-hpN4kf',)<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-GB"><o:p> </o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-GB">And after those messages from a=
ll hosts we get:<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-GB"><o:p> </o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-GB">VDSM command ActivateStorageDom=
ainVDS failed: Storage domain does not exist: (u'b83c159c-4ad6-4613-ba16-ba=
b95ccd10c0',)<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-GB">Failed to activate Storage Doma=
in VMHOST_LUN_205 (Data Center Production) by <user><o:p></o:p></span=
></p>
<p class=3D"MsoNormal"><span lang=3D"EN-GB">Invalid status on Data Center P=
roduction. Setting status to Non Responsive.<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-GB">Storage Pool Manager runs on Ho=
st vmhost003.fabagl.fabasoft.com (Address: vmhost003.fabagl.fabasoft.com), =
Data Center Production.<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-GB"><o:p> </o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-GB">Checking the hosts with multipa=
th –ll we see the LUN without errors.<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-GB"><o:p> </o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-GB">We run oVirt 4.2.1 on CentOS 7.=
4. Hosts are CentOS 7.4 hosts with oVirt installed using oVirt engine.<o:p>=
</o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-GB">Hosts are connected to about 30=
FC LUNs (8 TB each) on two all-flash storage arrays.<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-GB"><o:p> </o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"DE-AT" style=3D"mso-fareast-language:D=
E">Thank you,<o:p></o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"DE-AT" style=3D"mso-fareast-language:D=
E">Simone Bruckner</span><span style=3D"font-size:8.0pt;font-family:"A=
rial",sans-serif;mso-fareast-language:DE"><o:p></o:p></span></p>
<p class=3D"MsoNormal"><span style=3D"font-size:8.0pt;font-family:"Ari=
al",sans-serif;mso-fareast-language:DE"><o:p> </o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"DE-AT"><o:p> </o:p></span></p>
<p class=3D"MsoNormal"><span lang=3D"EN-GB"><o:p> </o:p></span></p>
</div>
</body>
</html>
--_000_2CB4E8C8E00E594EA06D4AC427E429920FE500D1fabamailserverf_--
7 years, 1 month
Re: [ovirt-users] Ghost Snapshot Disk
by Lionel Caignec
Ok so i reply myself,
Version is 4.1.7.6-1
I just delete manually a snapshot previously created. But this is an io intensive vm, whit big disk (2,5To, and 5To).
For the log, i cannot paste all my log on public list security reason, i will send you full in private.
Here is an extract relevant to my error
engine.log-20180210:2018-02-09 23:00:03,200+01 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-312) [44402a8c-3196-43f0-ba33-307ea78e6f49] EVENT_ID: USER_CREATE_SNAPSHOT(45), Correlation ID: 44402a8c-3196-43f0-ba33-307ea78e6f49, Job ID: 030cd310-fec9-4a89-8c3f-7888504fe973, Call Stack: null, Custom ID: null, Custom Event ID: -1, Message: Snapshot 'AUTO_7D_zz_nil_20180209_220002' creation for VM 'zz_nil' was initiated by snap_user@internal.
engine.log-20180210:2018-02-09 23:01:06,578+01 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler5) [] EVENT_ID: USER_CREATE_SNAPSHOT_FINISHED_SUCCESS(68), Correlation ID: 44402a8c-3196-43f0-ba33-307ea78e6f49, Job ID: 030cd310-fec9-4a89-8c3f-7888504fe973, Call Stack: null, Custom ID: null, Custom Event ID: -1, Message: Snapshot 'AUTO_7D_zz_nil_20180209_220002' creation for VM 'zz_nil' has been completed.
engine.log-20180220:2018-02-19 17:01:23,800+01 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-113) [] EVENT_ID: USER_REMOVE_SNAPSHOT(342), Correlation ID: 06a9efa4-1b80-4021-bf3e-41ecebe58a88, Job ID: c9a918a7-b00c-43cf-b6de-3659ac0765da, Call Stack: null, Custom ID: null, Custom Event ID: -1, Message: Snapshot 'AUTO_7D_zz_nil_20180209_220002' deletion for VM 'zz_nil' was initiated by acaignec@ldap-cines-authz.
engine.log-20180221:2018-02-20 22:24:45,174+01 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler6) [06a9efa4-1b80-4021-bf3e-41ecebe58a88] EVENT_ID: USER_REMOVE_SNAPSHOT_FINISHED_FAILURE(357), Correlation ID: 06a9efa4-1b80-4021-bf3e-41ecebe58a88, Job ID: c9a918a7-b00c-43cf-b6de-3659ac0765da, Call Stack: null, Custom ID: null, Custom Event ID: -1, Message: Failed to delete snapshot 'AUTO_7D_zz_nil_20180209_220002' for VM 'zz_nil'.
2018-02-20 22:24:46,266+01 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (DefaultQuartzScheduler3) [516079c3] SPMAsyncTask::PollTask: Polling task '34137342-4f30-476d-b16c-1cb7e0ea0ac0' (Parent Command 'DestroyImage', Parameters Type 'org.ovirt.engine.core.common.asynctasks.AsyncTaskParameters') returned status 'finished', result 'success'.
2018-02-20 22:24:46,267+01 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (DefaultQuartzScheduler3) [516079c3] BaseAsyncTask::onTaskEndSuccess: Task '34137342-4f30-476d-b16c-1cb7e0ea0ac0' (Parent Command 'DestroyImage', Parameters Type 'org.ovirt.engine.core.common.asynctasks.AsyncTaskParameters') ended successfully.
2018-02-20 22:24:46,268+01 INFO [org.ovirt.engine.core.bll.tasks.CommandAsyncTask] (DefaultQuartzScheduler3) [516079c3] CommandAsyncTask::endActionIfNecessary: All tasks of command 'fe8c91f2-386b-4b3f-bbf3-aeda8e9244c6' has ended -> executing 'endAction'
2018-02-20 22:24:46,268+01 INFO [org.ovirt.engine.core.bll.tasks.CommandAsyncTask] (DefaultQuartzScheduler3) [516079c3] CommandAsyncTask::endAction: Ending action for '1' tasks (command ID: 'fe8c91f2-386b-4b3f-bbf3-aeda8e9244c6'): calling endAction '.
2018-02-20 22:24:46,268+01 INFO [org.ovirt.engine.core.bll.tasks.CommandAsyncTask] (org.ovirt.thread.pool-6-thread-20) [516079c3] CommandAsyncTask::endCommandAction [within thread] context: Attempting to endAction 'DestroyImage',
2018-02-20 22:24:46,269+01 ERROR [org.ovirt.engine.core.bll.tasks.CommandAsyncTask] (org.ovirt.thread.pool-6-thread-20) [516079c3] [within thread]: endAction for action type DestroyImage threw an exception.: java.lang.NullPointerException
at org.ovirt.engine.core.bll.tasks.CoCoAsyncTaskHelper.endAction(CoCoAsyncTaskHelper.java:335) [bll.jar:]
at org.ovirt.engine.core.bll.tasks.CommandCoordinatorImpl.endAction(CommandCoordinatorImpl.java:340) [bll.jar:]
at org.ovirt.engine.core.bll.tasks.CommandAsyncTask.endCommandAction(CommandAsyncTask.java:154) [bll.jar:]
at org.ovirt.engine.core.bll.tasks.CommandAsyncTask.lambda$endActionIfNecessary$0(CommandAsyncTask.java:106) [bll.jar:]
at org.ovirt.engine.core.utils.threadpool.ThreadPoolUtil$InternalWrapperRunnable.run(ThreadPoolUtil.java:84) [utils.jar:]
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:511) [rt.jar:1.8.0_161]
at java.util.concurrent.FutureTask.run(FutureTask.java:266) [rt.jar:1.8.0_161]
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149) [rt.jar:1.8.0_161]
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624) [rt.jar:1.8.0_161]
at java.lang.Thread.run(Thread.java:748) [rt.jar:1.8.0_161]
----- Mail original -----
De: "Shani Leviim" <sleviim(a)redhat.com>
À: "Lionel Caignec" <caignec(a)cines.fr>
Envoyé: Lundi 26 Février 2018 14:42:38
Objet: Re: [ovirt-users] Ghost Snapshot Disk
Yes, please.
Can you detail a bit more regarding the actions you've done?
I'm assuming that since the snapshot had no description, trying to operate
it caused the nullPointerException you've got.
But I want to examine what was the cause for that.
Also, can you please answer back to the list?
*Regards,*
*Shani Leviim*
On Mon, Feb 26, 2018 at 3:37 PM, Lionel Caignec <caignec(a)cines.fr> wrote:
> Version is 4.1.7.6-1
>
> Do you want the log from the day i delete snapshot?
>
> ----- Mail original -----
> De: "Shani Leviim" <sleviim(a)redhat.com>
> À: "Lionel Caignec" <caignec(a)cines.fr>
> Cc: "users" <users(a)ovirt.org>
> Envoyé: Lundi 26 Février 2018 14:29:16
> Objet: Re: [ovirt-users] Ghost Snapshot Disk
>
> Hi,
>
> What is your engine version, please?
> I'm trying to reproduce your steps, for understanding better was is the
> cause for that error. Therefore, a full engine log is needed.
> Can you please attach it?
>
> Thanks,
>
>
> *Shani Leviim*
>
> On Mon, Feb 26, 2018 at 2:48 PM, Lionel Caignec <caignec(a)cines.fr> wrote:
>
> > Hi
> >
> > 1) this is error message from ui.log
> >
> > 2018-02-26 13:44:10,001+01 ERROR [org.ovirt.engine.ui.frontend.
> > server.gwt.OvirtRemoteLoggingService] (default task-3) [] Permutation
> > name: 8C01181C3B121D0AAE1312275CC96415
> > 2018-02-26 13:44:10,001+01 ERROR [org.ovirt.engine.ui.frontend.
> server.gwt.OvirtRemoteLoggingService]
> > (default task-3) [] Uncaught exception: com.google.gwt.core.client.
> JavaScriptException:
> > (TypeError)
> > __gwt$exception: <skipped>: Cannot read property 'F' of null
> > at org.ovirt.engine.ui.uicommonweb.models.storage.
> > DisksAllocationModel$3.$onSuccess(DisksAllocationModel.java:120)
> > at org.ovirt.engine.ui.uicommonweb.models.storage.
> > DisksAllocationModel$3.onSuccess(DisksAllocationModel.java:120)
> > at org.ovirt.engine.ui.frontend.Frontend$2.$onSuccess(
> Frontend.java:233)
> > [frontend.jar:]
> > at org.ovirt.engine.ui.frontend.Frontend$2.onSuccess(Frontend.
> java:233)
> > [frontend.jar:]
> > at org.ovirt.engine.ui.frontend.communication.
> > OperationProcessor$2.$onSuccess(OperationProcessor.java:139)
> > [frontend.jar:]
> > at org.ovirt.engine.ui.frontend.communication.
> > OperationProcessor$2.onSuccess(OperationProcessor.java:139)
> > [frontend.jar:]
> > at org.ovirt.engine.ui.frontend.communication.
> > GWTRPCCommunicationProvider$5$1.$onSuccess(GWTRPCCommunicationProvider.
> java:269)
> > [frontend.jar:]
> > at org.ovirt.engine.ui.frontend.communication.
> > GWTRPCCommunicationProvider$5$1.onSuccess(GWTRPCCommunicationProvider.
> java:269)
> > [frontend.jar:]
> > at com.google.gwt.user.client.rpc.impl.RequestCallbackAdapter.
> > onResponseReceived(RequestCallbackAdapter.java:198) [gwt-servlet.jar:]
> > at com.google.gwt.http.client.Request.$fireOnResponseReceived(
> Request.java:237)
> > [gwt-servlet.jar:]
> > at com.google.gwt.http.client.RequestBuilder$1.
> onReadyStateChange(RequestBuilder.java:409)
> > [gwt-servlet.jar:]
> > at Unknown.eval(webadmin-0.js@65)
> > at com.google.gwt.core.client.impl.Impl.apply(Impl.java:296)
> > [gwt-servlet.jar:]
> > at com.google.gwt.core.client.impl.Impl.entry0(Impl.java:335)
> > [gwt-servlet.jar:]
> > at Unknown.eval(webadmin-0.js@54)
> >
> >
> > 2) This line seems to be about the bad disk :
> >
> > f242cc9a-56c1-4ae4-aef0-f75eb01f74b1 | 2018-01-17 22:02:00+01 |
> > 2748779069440 | 00000000-0000-0000-0000-000000000000 |
> > 00000000-0000-0000-0000-000000000000 | 4 | 2018-01-18
> > 22:01:20.5+01 | 0dd2090c-3491-4fa1-98c3-54ae88be793c
> >
> >
> > 3) Snapshot table is empty for the concerned vm_id.
> >
> > ----- Mail original -----
> > De: "Shani Leviim" <sleviim(a)redhat.com>
> > À: "Lionel Caignec" <caignec(a)cines.fr>
> > Cc: "users" <users(a)ovirt.org>
> > Envoyé: Lundi 26 Février 2018 13:31:23
> > Objet: Re: [ovirt-users] Ghost Snapshot Disk
> >
> > Hi Lionel,
> >
> > The error message you've mentioned sounds like a UI error.
> > Can you please attach your ui log?
> >
> > Also, on the data from 'images' table you've uploaded, can you describe
> > which line is the relevant disk?
> >
> > Finally (for now), in case the snapshot was deleted, can you please
> > validate it by viewing the output of:
> > $ select * from snapshots;
> >
> >
> >
> > *Regards,*
> >
> > *Shani Leviim*
> >
> > On Mon, Feb 26, 2018 at 9:20 AM, Lionel Caignec <caignec(a)cines.fr>
> wrote:
> >
> > > Hi Shani,
> > > thank you for helping me with your reply,
> > > i juste make a little mistake on explanation. In fact it's the snapshot
> > > does not exist anymore. This is the disk(s) relative to her wich still
> > > exist, and perhaps LVM volume.
> > > So can i delete manually this disk in database? what about the lvm
> > volume?
> > > Is it better to recreate disk sync data and destroy old one?
> > >
> > >
> > >
> > > ----- Mail original -----
> > > De: "Shani Leviim" <sleviim(a)redhat.com>
> > > À: "Lionel Caignec" <caignec(a)cines.fr>
> > > Cc: "users" <users(a)ovirt.org>
> > > Envoyé: Dimanche 25 Février 2018 14:26:41
> > > Objet: Re: [ovirt-users] Ghost Snapshot Disk
> > >
> > > Hi Lionel,
> > >
> > > You can try to delete that snapshot directly from the database.
> > >
> > > In case of using psql [1], once you've logged in to your database, you
> > can
> > > run this query:
> > > $ select * from snapshots where vm_id = '<your_vm_id>';
> > > This one would list the snapshots associated with a VM by its id.
> > >
> > > In case you don't have you vm_id, you can locate it by querying:
> > > $ select * from vms where vm_name = 'nil';
> > > This one would show you some details about a VM by its name (including
> > the
> > > vm's id).
> > >
> > > Once you've found the relevant snapshot, you can delete it by running:
> > > $ delete from snapshots where snapshot_id = '<your_snapshot_id>';
> > > This one would delete the desired snapshot from the database.
> > >
> > > Since it's a delete operation, I would suggest confirming the ids
> before
> > > executing it.
> > >
> > > Hope you've found it useful!
> > >
> > > [1]
> > > https://www.ovirt.org/documentation/install-guide/
> > appe-Preparing_a_Remote_
> > > PostgreSQL_Database_for_Use_with_the_oVirt_Engine/
> > >
> > >
> > > *Regards,*
> > >
> > > *Shani Leviim*
> > >
> > > On Fri, Feb 23, 2018 at 9:25 AM, Lionel Caignec <caignec(a)cines.fr>
> > wrote:
> > >
> > > > Hi,
> > > >
> > > > i've a problem with snapshot. On one VM i've a "snapshot" ghost
> without
> > > > name or uuid, only information is size (see attachment). In the
> > snapshot
> > > > tab there is no trace about this disk.
> > > >
> > > > In database (table images) i found this :
> > > > f242cc9a-56c1-4ae4-aef0-f75eb01f74b1 | 2018-01-17 22:02:00+01 |
> > > > 2748779069440 | 00000000-0000-0000-0000-000000000000 |
> > > > 00000000-0000-0000-0000-000000000000 | 4 | 2018-01-18
> > > > 22:01:20.5+01 | 0dd2090c-3491-4fa1-98c3-54ae88be793c
> > > > | 2 | 4 | 17e26476-cecb-441d-a5f7-
> 46ab3ef387ee
> > |
> > > > 2018-01-17 22:01:29.663334+01 | 2018-01-19 08:40:14.345229+01 | f
> > |
> > > > 1 | 2
> > > > 1c7650fa-542b-4ec2-83a1-d2c1c31be5fd | 2018-01-17 22:02:03+01 |
> > > > 5368709120000 | 00000000-0000-0000-0000-000000000000 |
> > > > 00000000-0000-0000-0000-000000000000 | 4 | 2018-01-18
> > > > 22:01:20.84+01 | 0dd2090c-3491-4fa1-98c3-54ae88be793c
> > > > | 2 | 4 | bf834a91-c69f-4d2c-b639-
> 116ed58296d8
> > |
> > > > 2018-01-17 22:01:29.836133+01 | 2018-01-19 08:40:19.083508+01 | f
> > |
> > > > 1 | 2
> > > > 8614b21f-c0de-40f2-b4fb-e5cf193b0743 | 2018-02-09 23:00:44+01 |
> > > > 5368709120000 | 00000000-0000-0000-0000-000000000000 |
> > > > 00000000-0000-0000-0000-000000000000 | 4 | 2018-02-16
> > > > 23:00:02.855+01 | 390175dc-baf4-4831-936a-5ea68fa4c969
> > > >
> > > >
> > > > But i does not know which line is my disk. Is it possible to delete
> > > > directly into database?
> > > > Or is it better to dump my disk to another new and delete the
> > "corrupted
> > > > one"?
> > > >
> > > > Another thing, when i try to move the disk to another storage
> domain i
> > > > always get "uncaght exeption occured ..." and no error in engine.log.
> > > >
> > > >
> > > > Thank you for helping.
> > > >
> > > > --
> > > > Lionel Caignec
> > > >
> > > > _______________________________________________
> > > > Users mailing list
> > > > Users(a)ovirt.org
> > > > http://lists.ovirt.org/mailman/listinfo/users
> > > >
> > > >
> > >
> >
>
7 years, 1 month
Very Slow Console Performance - Windows 10
by FERNANDO FREDIANI
This is a multi-part message in MIME format.
--------------C64C2289E18148FC52BD4390
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Transfer-Encoding: 8bit
Hello
Has anyone installed a Windows 10 Virtual Machine ?
I am having serious Console Performance issues even after installing the
Ted Hat QXL controller from the virtio-win ISO.
Someone informed in a forum having similar issues and have resolved by
increasing the graphics card memory to 65536 by editing the XML (example
below), but how is that possible in oVirt permanently ?
<video>
<model type='qxl' ram='131072' vram='131072' vgamem='65536'
heads='1'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02'
function='0x0'/>
</video>
Thanks
Fernando
--------------C64C2289E18148FC52BD4390
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: 8bit
<html>
<head>
<meta http-equiv="content-type" content="text/html; charset=utf-8">
</head>
<body bgcolor="#FFFFFF" text="#000000">
<font face="arial, helvetica, sans-serif">Hello<br>
<br>
Has anyone installed a Windows 10 Virtual Machine ? <br>
<br>
I am having serious Console Performance issues even after
installing the Ted Hat QXL controller from the virtio-win ISO.<br>
Someone informed in a forum having similar issues and have
resolved by increasing the graphics card memory to 65536 by
editing the XML (example below), but how is that possible in oVirt
permanently ?</font><br>
<br>
<video><br>
<model type='qxl' ram='131072' vram='131072' vgamem='<ins>65536</ins>'
heads='1'/><br>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02'
function='0x0'/><br>
</video><br>
<br>
Thanks<br>
Fernando<br>
</body>
</html>
--------------C64C2289E18148FC52BD4390--
7 years, 1 month
ovirt 4.2 gluster configuration
by Edoardo Mazza
Hi all,
Scenario:
3 nodes each with 3 interfaces: 1 for management, 1 for gluster, 1 for VMs
Management interface has it own name and its own ip (es. name = ov1, ip=
192.168.1.1/24), the same is for gluster interface which has its own name
and its own ip (es. name = gluster1, ip= 192.168.2.1/24).
When configuring bricks from Ovirt Management tools I get the error: "no
uuid for the name ov1".
Network for gluster communication has been defined on network/interface
gluster1.
What's wrong with this configuration?
Thanks in advance.
Edoardo
7 years, 1 month
ovirt 4.1 - skylake - no avx512 support in virtual machines
by Marco Lorenzo Crociani
Hi,
I can't access avx512* instruction set from virtual machines.
I have made a one server compute cluster to test new hardware:
oVirt 4.1.9
CentOS 7
Cluster CPU Type: Intel Skylake Family
Compatibility Version: 4.1
HOST:
CPU Model Name:Intel(R) Xeon(R) Platinum 8180 CPU @ 2.50GHz
Family: Family
CPU Type: Intel Skylake Family
Virtual Machine settings
A) VM:
Custom CPU Type: Use cluster default(Intel Skylake Family)
General Tab shows: Guest CPU Type: Skylake-Client
avx512: NO
B) VM:
Custom CPU Type: Skylake-Client
General Tab shows: Guest CPU Type: Skylake-Client
avx512: NO
C) VM:
Custom CPU Type: Use cluster default(Intel Skylake Family) [grey -
cannot modify]
Migration mode: Do not allow migration
Pass-Through Host CPU
General Tab shows: Guest CPU Type: Skylake-Client
avx512: YES ( cat /proc/cpuinfo |grep avx512: avx512f avx512dq
avx512cd avx512bw avx512vl )
Using pass-through host cpu (disabling vm migration) is the only way to
access avx512 in a VM, is it a bug or am I missing something?
Regards,
--
Marco Crociani
Prisma Telecom Testing S.r.l.
via Petrocchi, 4 20127 MILANO ITALY
Phone: +39 02 26113507
Fax: +39 02 26113597
e-mail: marcoc(a)prismatelecomtesting.com
web: http://www.prismatelecomtesting.com
7 years, 2 months
oVIRT 4.1 / iSCSI Multipathing
by Devin Acosta
I am using the latest release of oVIRT 4.1.3, and I am connecting a Dell
Compelent SAN that has 2 fault domains each on a separate VLAN that I have
attached to oVIRT. From what I understand I am suppose to go into “iSCSI
Multipathing” option and add a BOND of the iSCSI interfaces. I have done
this selecting the 2 logical networks together for iSCSI. I notice that
there is an option below to select Storage Targets but if I select the
storage targets below with the logical networks the the cluster goes crazy
and appears to be mad. Storage, Nodes, and everything goes offline even
thought I have NFS also attached to the cluster.
How should this best be configured. What we notice that happens is when the
server reboots it seems to log into the SAN correctly but according the the
Dell SAN it is only logged into once controller. So only pulls both fault
domains from a single controller.
Please Advise.
Devin
7 years, 2 months
Can't move/copy VM disks between Data Centers
by Andrei V
--Apple-Mail=_36201DCF-3630-4952-83E8-1C1F6354AA6E
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain;
charset=utf-8
Hi,
I have oVirt setup, separate PC host engine + 2 nodes (#10 + #11) with =
local storage domains (internal RAIDs).
1st node #10 is currently active and can=E2=80=99t be turned off.
Since oVirt doesn=E2=80=99t support more then 1 host in data center with =
local storage domain as described here:
http://lists.ovirt.org/pipermail/users/2018-January/086118.html =
<http://lists.ovirt.org/pipermail/users/2018-January/086118.html>
defined another data center with 1 node #11.
Problem:=20
1) can=E2=80=99t copy or move VM disks from node #10 (even of inactive =
VMs) to node #11, this node is NOT being shown as possible destination.
2) can=E2=80=99t migrate active VMs to node #11.
3) Added NFS shares to data center #1 -> node #10, but can=E2=80=99t =
change data center #1 -> storage type to Shared, because this operation =
requires detachment of local storage domains, which is not possible, =
several VMs are active and can=E2=80=99t be stopped.
VM disks placed on local storage domains because of performance =
limitations of our 1Gbit network.=20
2 VMs running our accounting/inventory control system, and are critical =
to NFS storage performance limits.
How to solve this problem ?
Thanks in advance.
Andrei
--Apple-Mail=_36201DCF-3630-4952-83E8-1C1F6354AA6E
Content-Transfer-Encoding: quoted-printable
Content-Type: text/html;
charset=utf-8
<html><head><meta http-equiv=3D"Content-Type" content=3D"text/html; =
charset=3Dutf-8"></head><body style=3D"word-wrap: break-word; =
-webkit-nbsp-mode: space; line-break: after-white-space;" =
class=3D"">Hi,<div class=3D""><br class=3D""></div><div class=3D"">I =
have oVirt setup, separate PC host engine + 2 nodes (#10 + #11) =
with local storage domains (internal RAIDs).</div><div class=3D"">1st =
node #10 is currently active and can=E2=80=99t be turned off.</div><div =
class=3D""><br class=3D""></div><div class=3D"">Since oVirt doesn=E2=80=99=
t support more then 1 host in data center with local storage domain as =
described here:</div><div class=3D""><a =
href=3D"http://lists.ovirt.org/pipermail/users/2018-January/086118.html" =
class=3D"">http://lists.ovirt.org/pipermail/users/2018-January/086118.html=
</a><br class=3D"">defined another data center with 1 node =
#11.</div><div class=3D""><br class=3D""></div><div =
class=3D"">Problem: </div><div class=3D"">1) can=E2=80=99t copy or =
move VM disks from node #10 (even of inactive VMs) to node #11, this =
node is NOT being shown as possible destination.</div><div class=3D"">2) =
can=E2=80=99t migrate active VMs to node #11.</div><div class=3D"">3) =
Added NFS shares to data center #1 -> node #10, but can=E2=80=99t =
change data center #1 -> storage type to Shared, because this =
operation requires detachment of local storage domains, which is not =
possible, several VMs are active and can=E2=80=99t be stopped.</div><div =
class=3D""><br class=3D""></div><div class=3D"">VM disks placed on local =
storage domains because of performance limitations of our 1Gbit =
network. </div><div class=3D"">2 VMs running our =
accounting/inventory control system, and are critical to NFS storage =
performance limits.</div><div class=3D""><br class=3D""></div><div =
class=3D"">How to solve this problem ?</div><div class=3D"">Thanks in =
advance.</div><div class=3D""><br class=3D""></div><div =
class=3D"">Andrei</div><div class=3D""><br class=3D""></div></body></html>=
--Apple-Mail=_36201DCF-3630-4952-83E8-1C1F6354AA6E--
7 years, 2 months
VM paused rather than migrate to another hosts
by Terry hey
Dear all,
I am testing iSCSI bonding failover test on oVirt, but i observed that VM
were paused and did not migrate to another host. Please see the details as
follows.
I have two hypervisors. Since they are running iLO 5 and oVirt 4.2 cannot
support iLO 5, thus i cannot setup power management.
For the cluster setting, I set "Migrate Virtual Machines" under the
Migration Policy.
For each hypervisor, I bonded two iSCSI interface as bond 1.
I created one Virtual machine and enable high availability on it.
Also, I created one Virtual machine and did not enable high availability on
it.
When i shutdown one of the iSCSI interface, nothing happened.
But when i shutdown both iSCSI interface, VM in that hosts were paused and
did not migrate to another hosts. Is this behavior normal or i miss
something?
Thank you all of you.
Regards,
Terry Hung
7 years, 2 months
