ovirt 4.3.10 Web UI constantly "finished activating host"
by Strahil Nikolov
I'm not sure if this one is related to "time shift" in the DB (as I found that dwh_history_timekeeping had some entries 1 month ahead/ETL service issues also/, but I keep getting spammed that the host has been activated.
Any hint ?
Best Regards,
Strahil Nikolov
5 years
oVirt 4.4.0 HE deployment on GlusterFS fails during health check
by Oliver Leinfelder
Hi,
I have the following two components:
1.) A freshly installed VM host (oVirt Node 4.4.0 release ISO)
2.) 3 storage hosts, also freshly installed from oVirt Node 4.4.0
release ISO
The storage hosts have been successfully installed with Gluster (through
Cockpit). They have two volumes, both of which I can mount and
read/write from a client.
On the VM host, I ran "hosted-engine --deploy" (no backups imported).
When prompted for storage, I answered "glusterfs" and specified
"storagehost1:/engine" as storage for the HE deployment. For mount
options, I specified
"backup-volfile-servers=storagehost2:/engine:storagehost3:/engine"
(Not the real hostnames, but all of them are resolvable via internal DNS)
Everything seems to works fine, I also see the "engine" volume become
populated with data. At some point I could ping and SSH login to the HE.
When the setup proceed to health check, it failed and the whole process
was aborted :-(
"hosted-engine --vm-status" reported "failed liveliness check" when it
was reachable via SSH. At some point the engine went down and, to my
surprise, shows a grub prompt after the restart when doing a
"hosted-engine --console".
[ INFO ] TASK [ovirt.hosted_engine_setup : Check engine VM health]
[ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 180, "changed":
true, "cmd": ["hosted-engine", "--vm-status", "--json"], "delta":
"0:00:00.160595", "end": "2020-06-12 17:50:05.675774", "rc": 0, "start":
"2020-06-12 17:50:05.515179", "stderr": "", "stderr_lines": [],
"stdout": "{\"1\": {\"host-id\": 1, \"host-ts\": 11528, \"score\": 3400,
\"engine-status\": {\"vm\": \"up\", \"health\": \"bad\", \"detail\":
\"Powering down\", \"reason\": \"failed liveliness check\"},
\"hostname\": \"vmhost\", \"maintenance\": false, \"stopped\": false,
\"crc32\": \"2c447835\", \"conf_on_shared_storage\": true,
\"local_conf_timestamp\": 11528, \"extra\":
\"metadata_parse_version=1\\nmetadata_feature_version=1\\ntimestamp=11528
(Fri Jun 12 17:49:57
2020)\\nhost-id=1\\nscore=3400\\nvm_conf_refresh_time=11528 (Fri Jun 12
17:49:57
2020)\\nconf_on_shared_storage=True\\nmaintenance=False\\nstate=EngineStop\\nstopped=False\\ntimeout=Thu
Jan 1 04:12:48 1970\\n\", \"live-data\": true}, \"global_maintenance\":
false}", "stdout_lines": ["{\"1\": {\"host-id\": 1, \"host-ts\": 11528,
\"score\": 3400, \"engine-status\": {\"vm\": \"up\", \"health\":
\"bad\", \"detail\": \"Powering down\", \"reason\": \"failed liveliness
check\"}, \"hostname\": \"vmhost\", \"maintenance\": false, \"stopped\":
false, \"crc32\": \"2c447835\", \"conf_on_shared_storage\": true,
\"local_conf_timestamp\": 11528, \"extra\":
\"metadata_parse_version=1\\nmetadata_feature_version=1\\ntimestamp=11528
(Fri Jun 12 17:49:57
2020)\\nhost-id=1\\nscore=3400\\nvm_conf_refresh_time=11528 (Fri Jun 12
17:49:57
2020)\\nconf_on_shared_storage=True\\nmaintenance=False\\nstate=EngineStop\\nstopped=False\\ntimeout=Thu
Jan 1 04:12:48 1970\\n\", \"live-data\": true}, \"global_maintenance\":
false}"]}
A second attempt failed at exactly the same stage.
I can see the following in the setup log:
ovirt-hosted-engine-setup-20200612151212-j9zwd2.log:
2020-06-12 17:33:18,314+0200 DEBUG
otopi.ovirt_hosted_engine_setup.ansible_utils
ansible_utils._process_output:103 {'msg': 'non-zero return code', 'cmd':
['hosted-engine', '--reinitialize-lockspace', '--force'], 'stdout': '',
'stderr': 'Traceback (most recent call last):\n
File "/usr/lib64/python3.6/runpy.py", line 193, in
_run_module_as_main\n "__main__", mod_spec)\n File
"/usr/lib64/python3.6/runpy.py", line 85, in _run_code\n exec(code,
run_globals)\n File
"/usr/lib/python3.6/site-packages/ovirt_hosted_engine_setup/reinitialize_
lockspace.py", line 30, in <module>\n ha_cli.reset_lockspace(force)\n
File
"/usr/lib/python3.6/site-packages/ovirt_hosted_engine_ha/client/client.py",
line 286, in reset_lockspace\n stats =
broker.get_stats_from_storage()\n File "/usr/lib/python3.6/site-packages/ov
irt_hosted_engine_ha/lib/brokerlink.py", line 148, in
get_stats_from_storage\n result = self._proxy.get_stats()\n File
"/usr/lib64/python3.6/xmlrpc/client.py", line 1112, in __call__\n return
self.__send(self.__name, args)\n File "/usr/lib64/python3.6/xmlrpc/client
.py", line 1452, in __request\n verbose=self.__verbose\n File
"/usr/lib64/python3.6/xmlrpc/client.py", line 1154, in request\n return
self.single_request(host, handler, request_body, verbose)\n File
"/usr/lib64/python3.6/xmlrpc/client.py", line 1166, in single_requ
est\n http_conn = self.send_request(host, handler, request_body,
verbose)\n File "/usr/lib64/python3.6/xmlrpc/client.py", line 1279, in
send_request\n self.send_content(connection, request_body)\n File
"/usr/lib64/python3.6/xmlrpc/client.py", line 1309, in send_con
tent\n connection.endheaders(request_body)\n File
"/usr/lib64/python3.6/http/client.py", line 1249, in endheaders\n
self._send_output(message_body, encode_chunked=encode_chunked)\n File
"/usr/lib64/python3.6/http/client.py", line 1036, in _send_output\n
self.sen
d(msg)\n File "/usr/lib64/python3.6/http/client.py", line 974, in
send\n self.connect()\n File
"/usr/lib/python3.6/site-packages/ovirt_hosted_engine_ha/lib/unixrpc.py",
line 74, in connect\n
self.sock.connect(base64.b16decode(self.host))\nFileNotFoundError: [Errno
2] No such file or directory', 'rc': 1, 'start': '2020-06-12
17:33:17.982995', 'end': '2020-06-12 17:33:18.164197', 'delta':
'0:00:00.181202', 'changed': True, 'invocation': {'module_args':
{'_raw_params': 'hosted-engine --reinitialize-lockspace --force',
'warn': True, '_u
ses_shell': False, 'stdin_add_newline': True, 'strip_empty_ends': True,
'argv': None, 'chdir': None, 'executable': None, 'creates': None,
'removes': None, 'stdin': None}}, 'stdout_lines': [], 'stderr_lines':
['Traceback (most recent call last):', ' File "/usr/lib64/python
3.6/runpy.py", line 193, in _run_module_as_main', ' "__main__",
mod_spec)', ' File "/usr/lib64/python3.6/runpy.py", line 85, in
_run_code', ' exec(code, run_globals)', ' File
"/usr/lib/python3.6/site-packages/ovirt_hosted_engine_setup/reinitialize_lockspace.py",
li
ne 30, in <module>', ' ha_cli.reset_lockspace(force)', ' File
"/usr/lib/python3.6/site-packages/ovirt_hosted_engine_ha/client/client.py",
line 286, in reset_lockspace', ' stats =
broker.get_stats_from_storage()', ' File
"/usr/lib/python3.6/site-packages/ovirt_hoste
d_engine_ha/lib/brokerlink.py", line 148, in get_stats_from_storage',
' result = self._proxy.get_stats()', ' File
"/usr/lib64/python3.6/xmlrpc/client.py", line 1112, in __call__', '
return self.__send(self.__name, args)', ' File
"/usr/lib64/python3.6/xmlrpc/client.
py", line 1452, in __request', ' verbose=self.__verbose', ' File
"/usr/lib64/python3.6/xmlrpc/client.py", line 1154, in request', '
return self.single_request(host, handler, request_body, verbose)', '
File "/usr/lib64/python3.6/xmlrpc/client.py", line 1166, in sing
le_request', ' http_conn = self.send_request(host, handler,
request_body, verbose)', ' File
"/usr/lib64/python3.6/xmlrpc/client.py", line 1279, in send_request',
' self.send_content(connection, request_body)', ' File
"/usr/lib64/python3.6/xmlrpc/client.py", line 13
09, in send_content', ' connection.endheaders(request_body)', ' File
"/usr/lib64/python3.6/http/client.py", line 1249, in endheaders', '
self._send_output(message_body, encode_chunked=encode_chunked)', ' File
"/usr/lib64/python3.6/http/client.py", line 1036, in _se
nd_output', ' self.send(msg)', ' File
"/usr/lib64/python3.6/http/client.py", line 974, in send', '
self.connect()', ' File
"/usr/lib/python3.6/site-packages/ovirt_hosted_engine_ha/lib/unixrpc.py",
line 74, in connect', ' self.sock.connect(base64.b16decode(self.h
ost))', 'FileNotFoundError: [Errno 2] No such file or directory'],
'_ansible_no_log': False, 'attempts': 5}
Bonus question: I can see the following in the gluster volume log on the
storage host:
[2020-06-12 17:30:38.368773] E [MSGID: 113072]
[posix-inode-fd-ops.c:1976:posix_writev] 0-engine-posix: write failed:
offset 0, [Invalid argument]
[2020-06-12 17:30:38.368832] E [MSGID: 115067]
[server-rpc-fops_v2.c:1372:server4_writev_cbk] 0-engine-server: 190586:
WRITEV 4 (baf5fbaa-0dc0-4ee4-bfd9-fa98f8853827), client:
CTX_ID:be1aca7a-5ba7-453d-94fd-d24f8c33511e-GRAPH_ID:0-PID:121217-HOST:vmhost-PC_NAME:engine-client-0-RECON_NO:-0,
error-xlator: engine-posix [Invalid argument]
There are some entries every few minutes like this (not like 100s per
minute). Since gluster is completely new for me, I'm still trying to
find out whether this might be related.
Thanks for any input!
Best regards
Oliver
5 years
Re: oVirt noVNC
by Staniforth, Paul
Sorry Anton,
I'm trying to get a lot of things sorted before the weekend.
This seems the wrong way round, if you follow the documentation you shouldn't have the symbolic link on the working system unless you replaced the file it was pointing to.
Do you have certificate bundles for both systems?
Regards,
Paul S.
________________________________
From: Anton Louw <Anton.Louw(a)voxtelecom.co.za>
Sent: 12 June 2020 11:44
To: Staniforth, Paul <P.Staniforth(a)leedsbeckett.ac.uk>; users(a)ovirt.org <users(a)ovirt.org>
Subject: RE: oVirt noVNC
Caution External Mail: Do not click any links or open any attachments unless you trust the sender and know that the content is safe.
Thanks Paul,
So the symbolic link has then been removed, as per the below. Not quite sure where to go from here.
Anton Louw
Cloud Engineer: Storage and Virtualization at Vox
________________________________
T: 087 805 0000 | D: 087 805 1572
M: N/A
E: anton.louw(a)voxtelecom.co.za<mailto:anton.louw@voxtelecom.co.za>
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
www.vox.co.za<https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.vox....>
[F]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.fac...>
[T]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.twi...>
[I]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ins...>
[L]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.lin...>
[Y]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.you...>
From: Staniforth, Paul <P.Staniforth(a)leedsbeckett.ac.uk>
Sent: 12 June 2020 12:30
To: Anton Louw <Anton.Louw(a)voxtelecom.co.za>; users(a)ovirt.org
Subject: Re: oVirt noVNC
Yes Anton,
I think it's in the documentation it's
Steps 2 & 3
*
* The Engine has been configured to use /etc/pki/ovirt-engine/apache-ca.pem, which is symbolically linked to /etc/pki/ovirt-engine/ca.pem. Remove the symbolic link.
# rm /etc/pki/ovirt-engine/apache-ca.pem
* Save your CA certificate as /etc/pki/ovirt-engine/apache-ca.pem.
# cp /tmp/3rd-party-ca-cert.pem /etc/pki/ovirt-engine/apache-ca.pem
Regards,
Paul S.
________________________________
From: Anton Louw <Anton.Louw(a)voxtelecom.co.za<mailto:Anton.Louw@voxtelecom.co.za>>
Sent: 12 June 2020 11:06
To: Staniforth, Paul <P.Staniforth(a)leedsbeckett.ac.uk<mailto:P.Staniforth@leedsbeckett.ac.uk>>; users(a)ovirt.org<mailto:users@ovirt.org> <users(a)ovirt.org<mailto:users@ovirt.org>>
Subject: RE: oVirt noVNC
Caution External Mail: Do not click any links or open any attachments unless you trust the sender and know that the content is safe.
Hi Paul,
Double checked the permissions as well. All seems to be fine. The only thing that does look different between the environments are the below:
ENV1 (Not working)
[cid:image001.png@01D640B7.2B69DFC0]
ENV2 (Working)
[cid:image007.png@01D640B7.2B69DFC0]
It seems that on the working environment, there is a shortcut file (apached-ca.pem) which points to the ca.pem file, but on the environment that is not working, the apache-ca.pem file is not a shortcut. Could this perhaps be an issue?
Thanks
Anton Louw
Cloud Engineer: Storage and Virtualization at Vox
________________________________
T: 087 805 0000 | D: 087 805 1572
M: N/A
E: anton.louw(a)voxtelecom.co.za<mailto:anton.louw@voxtelecom.co.za>
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
www.vox.co.za<https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.vox....>
[F]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.fac...>
[T]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.twi...>
[I]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ins...>
[L]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.lin...>
[Y]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.you...>
From: Staniforth, Paul <P.Staniforth(a)leedsbeckett.ac.uk<mailto:P.Staniforth@leedsbeckett.ac.uk>>
Sent: 12 June 2020 10:44
To: Anton Louw <Anton.Louw(a)voxtelecom.co.za<mailto:Anton.Louw@voxtelecom.co.za>>; users(a)ovirt.org<mailto:users@ovirt.org>
Subject: Re: oVirt noVNC
No worries,
If all is pointing to the correct files I would check permissions.
Regards,
Paul S.
________________________________
From: Anton Louw <Anton.Louw(a)voxtelecom.co.za<mailto:Anton.Louw@voxtelecom.co.za>>
Sent: 12 June 2020 09:34
To: Staniforth, Paul <P.Staniforth(a)leedsbeckett.ac.uk<mailto:P.Staniforth@leedsbeckett.ac.uk>>; users(a)ovirt.org<mailto:users@ovirt.org> <users(a)ovirt.org<mailto:users@ovirt.org>>
Subject: RE: oVirt noVNC
Caution External Mail: Do not click any links or open any attachments unless you trust the sender and know that the content is safe.
Hi Paul,
Thanks for the reply. Apologies, I should have added that I have installed our own certificates. The main problem I am facing is that the noVNC console just refuses to open, I get the attached error with any VM I try and access. I should have perhaps started with this issue in my first mail, apologies ??
Thanks
Anton Louw
Cloud Engineer: Storage and Virtualization at Vox
________________________________
T: 087 805 0000 | D: 087 805 1572
M: N/A
E: anton.louw(a)voxtelecom.co.za<mailto:anton.louw@voxtelecom.co.za>
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
www.vox.co.za<https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.vox....>
[F]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.fac...>
[T]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.twi...>
[I]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ins...>
[L]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.lin...>
[Y]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.you...>
From: Staniforth, Paul <P.Staniforth(a)leedsbeckett.ac.uk<mailto:P.Staniforth@leedsbeckett.ac.uk>>
Sent: 12 June 2020 10:29
To: users(a)ovirt.org<mailto:users@ovirt.org>; Anton Louw <Anton.Louw(a)voxtelecom.co.za<mailto:Anton.Louw@voxtelecom.co.za>>
Subject: Re: oVirt noVNC
Hello Anton,
if your organisation has it's own CA you can install your own certificates or get certificates from a trusted CA.
https://www.ovirt.org/documentation/admin-guide/appe-oVirt_and_SSL.html<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovi...>
Paul S.
________________________________
From: Anton Louw via Users <users(a)ovirt.org<mailto:users@ovirt.org>>
Sent: 12 June 2020 08:56
To: users(a)ovirt.org<mailto:users@ovirt.org> <users(a)ovirt.org<mailto:users@ovirt.org>>
Subject: [ovirt-users] oVirt noVNC
Caution External Mail: Do not click any links or open any attachments unless you trust the sender and know that the content is safe.
Hi Everybody,
With regards to noVNC, is it a requirement to install the CA into your local browser? I would like users to access their VM console, but with no additional work from their side, ie. Downloading the CA and importing it.
Thank you
Anton Louw
Cloud Engineer: Storage and Virtualization at Vox
________________________________
T: 087 805 0000 | D: 087 805 1572
M: N/A
E: anton.louw(a)voxtelecom.co.za<mailto:anton.louw@voxtelecom.co.za>
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
www.vox.co.za<https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.vox....>
[F]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.fac...>
[T]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.twi...>
[I]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ins...>
[L]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.lin...>
[Y]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.you...>
[#VoxBrand]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.vox...>
Disclaimer
The contents of this email are confidential to the sender and the intended recipient. Unless the contents are clearly and entirely of a personal nature, they are subject to copyright in favour of the holding company of the Vox group of companies. Any recipient who receives this email in error should immediately report the error to the sender and permanently delete this email from all storage devices.
This email has been scanned for viruses and malware, and may have been automatically archived by Mimecast Ltd, an innovator in Software as a Service (SaaS) for business. Providing a safer and more useful place for your human generated data. Specializing in; Security, archiving and compliance. To find out more Click Here<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.vox...>.
To view the terms under which this email is distributed, please go to:-
http://leedsbeckett.ac.uk/disclaimer/email/
To view the terms under which this email is distributed, please go to:-
http://leedsbeckett.ac.uk/disclaimer/email/
To view the terms under which this email is distributed, please go to:-
http://leedsbeckett.ac.uk/disclaimer/email/
To view the terms under which this email is distributed, please go to:-
http://leedsbeckett.ac.uk/disclaimer/email/
5 years
Re: oVirt noVNC
by Anton Louw
Thanks Paul,
So the symbolic link has then been removed, as per the below. Not quite sure where to go from here.
Anton Louw
Cloud Engineer: Storage and Virtualization
______________________________________
D: 087 805 1572 | M: N/A
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
anton.louw(a)voxtelecom.co.za
www.vox.co.za
From: Staniforth, Paul <P.Staniforth(a)leedsbeckett.ac.uk>
Sent: 12 June 2020 12:30
To: Anton Louw <Anton.Louw(a)voxtelecom.co.za>; users(a)ovirt.org
Subject: Re: oVirt noVNC
Yes Anton,
I think it's in the documentation it's
Steps 2 & 3
•
• The Engine has been configured to use /etc/pki/ovirt-engine/apache-ca.pem, which is symbolically linked to /etc/pki/ovirt-engine/ca.pem. Remove the symbolic link.
# rm /etc/pki/ovirt-engine/apache-ca.pem
• Save your CA certificate as /etc/pki/ovirt-engine/apache-ca.pem.
# cp /tmp/3rd-party-ca-cert.pem /etc/pki/ovirt-engine/apache-ca.pem
Regards,
Paul S.
________________________________
From: Anton Louw <Anton.Louw(a)voxtelecom.co.za<mailto:Anton.Louw@voxtelecom.co.za>>
Sent: 12 June 2020 11:06
To: Staniforth, Paul <P.Staniforth(a)leedsbeckett.ac.uk<mailto:P.Staniforth@leedsbeckett.ac.uk>>; users(a)ovirt.org<mailto:users@ovirt.org> <users(a)ovirt.org<mailto:users@ovirt.org>>
Subject: RE: oVirt noVNC
Caution External Mail: Do not click any links or open any attachments unless you trust the sender and know that the content is safe.
Hi Paul,
Double checked the permissions as well. All seems to be fine. The only thing that does look different between the environments are the below:
ENV1 (Not working)
[cid:image001.png@01D640B7.2B69DFC0]
ENV2 (Working)
[cid:image007.png@01D640B7.2B69DFC0]
It seems that on the working environment, there is a shortcut file (apached-ca.pem) which points to the ca.pem file, but on the environment that is not working, the apache-ca.pem file is not a shortcut. Could this perhaps be an issue?
Thanks
Anton Louw
Cloud Engineer: Storage and Virtualization at Vox
________________________________
T: 087 805 0000 | D: 087 805 1572
M: N/A
E: anton.louw(a)voxtelecom.co.za<mailto:anton.louw@voxtelecom.co.za>
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
www.vox.co.za<https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.vox....>
[F]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.fac...>
[T]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.twi...>
[I]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ins...>
[L]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.lin...>
[Y]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.you...>
From: Staniforth, Paul <P.Staniforth(a)leedsbeckett.ac.uk<mailto:P.Staniforth@leedsbeckett.ac.uk>>
Sent: 12 June 2020 10:44
To: Anton Louw <Anton.Louw(a)voxtelecom.co.za<mailto:Anton.Louw@voxtelecom.co.za>>; users(a)ovirt.org<mailto:users@ovirt.org>
Subject: Re: oVirt noVNC
No worries,
If all is pointing to the correct files I would check permissions.
Regards,
Paul S.
________________________________
From: Anton Louw <Anton.Louw(a)voxtelecom.co.za<mailto:Anton.Louw@voxtelecom.co.za>>
Sent: 12 June 2020 09:34
To: Staniforth, Paul <P.Staniforth(a)leedsbeckett.ac.uk<mailto:P.Staniforth@leedsbeckett.ac.uk>>; users(a)ovirt.org<mailto:users@ovirt.org> <users(a)ovirt.org<mailto:users@ovirt.org>>
Subject: RE: oVirt noVNC
Caution External Mail: Do not click any links or open any attachments unless you trust the sender and know that the content is safe.
Hi Paul,
Thanks for the reply. Apologies, I should have added that I have installed our own certificates. The main problem I am facing is that the noVNC console just refuses to open, I get the attached error with any VM I try and access. I should have perhaps started with this issue in my first mail, apologies 😊
Thanks
Anton Louw
Cloud Engineer: Storage and Virtualization at Vox
________________________________
T: 087 805 0000 | D: 087 805 1572
M: N/A
E: anton.louw(a)voxtelecom.co.za<mailto:anton.louw@voxtelecom.co.za>
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
www.vox.co.za<https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.vox....>
[F]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.fac...>
[T]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.twi...>
[I]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ins...>
[L]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.lin...>
[Y]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.you...>
From: Staniforth, Paul <P.Staniforth(a)leedsbeckett.ac.uk<mailto:P.Staniforth@leedsbeckett.ac.uk>>
Sent: 12 June 2020 10:29
To: users(a)ovirt.org<mailto:users@ovirt.org>; Anton Louw <Anton.Louw(a)voxtelecom.co.za<mailto:Anton.Louw@voxtelecom.co.za>>
Subject: Re: oVirt noVNC
Hello Anton,
if your organisation has it's own CA you can install your own certificates or get certificates from a trusted CA.
https://www.ovirt.org/documentation/admin-guide/appe-oVirt_and_SSL.html<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovi...>
Paul S.
________________________________
From: Anton Louw via Users <users(a)ovirt.org<mailto:users@ovirt.org>>
Sent: 12 June 2020 08:56
To: users(a)ovirt.org<mailto:users@ovirt.org> <users(a)ovirt.org<mailto:users@ovirt.org>>
Subject: [ovirt-users] oVirt noVNC
Caution External Mail: Do not click any links or open any attachments unless you trust the sender and know that the content is safe.
Hi Everybody,
With regards to noVNC, is it a requirement to install the CA into your local browser? I would like users to access their VM console, but with no additional work from their side, ie. Downloading the CA and importing it.
Thank you
Anton Louw
Cloud Engineer: Storage and Virtualization at Vox
________________________________
T: 087 805 0000 | D: 087 805 1572
M: N/A
E: anton.louw(a)voxtelecom.co.za<mailto:anton.louw@voxtelecom.co.za>
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
www.vox.co.za<https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.vox....>
[F]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.fac...>
[T]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.twi...>
[I]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ins...>
[L]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.lin...>
[Y]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.you...>
[#VoxBrand]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.vox...>
Disclaimer
The contents of this email are confidential to the sender and the intended recipient. Unless the contents are clearly and entirely of a personal nature, they are subject to copyright in favour of the holding company of the Vox group of companies. Any recipient who receives this email in error should immediately report the error to the sender and permanently delete this email from all storage devices.
This email has been scanned for viruses and malware, and may have been automatically archived by Mimecast Ltd, an innovator in Software as a Service (SaaS) for business. Providing a safer and more useful place for your human generated data. Specializing in; Security, archiving and compliance. To find out more Click Here<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.vox...>.
To view the terms under which this email is distributed, please go to:-
http://leedsbeckett.ac.uk/disclaimer/email/<http://leedsbeckett.ac.uk/disclaimer/email/>
To view the terms under which this email is distributed, please go to:-
http://leedsbeckett.ac.uk/disclaimer/email/<http://leedsbeckett.ac.uk/disclaimer/email/>
To view the terms under which this email is distributed, please go to:-
http://leedsbeckett.ac.uk/disclaimer/email/<http://leedsbeckett.ac.uk/disclaimer/email/>
5 years
Re: oVirt noVNC
by Staniforth, Paul
Yes Anton,
I think it's in the documentation it's
Steps 2 & 3
*
* The Engine has been configured to use /etc/pki/ovirt-engine/apache-ca.pem, which is symbolically linked to /etc/pki/ovirt-engine/ca.pem. Remove the symbolic link.
# rm /etc/pki/ovirt-engine/apache-ca.pem
* Save your CA certificate as /etc/pki/ovirt-engine/apache-ca.pem.
# cp /tmp/3rd-party-ca-cert.pem /etc/pki/ovirt-engine/apache-ca.pem
Regards,
Paul S.
________________________________
From: Anton Louw <Anton.Louw(a)voxtelecom.co.za>
Sent: 12 June 2020 11:06
To: Staniforth, Paul <P.Staniforth(a)leedsbeckett.ac.uk>; users(a)ovirt.org <users(a)ovirt.org>
Subject: RE: oVirt noVNC
Caution External Mail: Do not click any links or open any attachments unless you trust the sender and know that the content is safe.
Hi Paul,
Double checked the permissions as well. All seems to be fine. The only thing that does look different between the environments are the below:
ENV1 (Not working)
[cid:image001.png@01D640B1.B1BEAA20]
ENV2 (Working)
[cid:image007.png@01D640B1.E97498D0]
It seems that on the working environment, there is a shortcut file (apached-ca.pem) which points to the ca.pem file, but on the environment that is not working, the apache-ca.pem file is not a shortcut. Could this perhaps be an issue?
Thanks
Anton Louw
Cloud Engineer: Storage and Virtualization at Vox
________________________________
T: 087 805 0000 | D: 087 805 1572
M: N/A
E: anton.louw(a)voxtelecom.co.za<mailto:anton.louw@voxtelecom.co.za>
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
www.vox.co.za<https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.vox....>
[F]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.fac...>
[T]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.twi...>
[I]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ins...>
[L]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.lin...>
[Y]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.you...>
From: Staniforth, Paul <P.Staniforth(a)leedsbeckett.ac.uk>
Sent: 12 June 2020 10:44
To: Anton Louw <Anton.Louw(a)voxtelecom.co.za>; users(a)ovirt.org
Subject: Re: oVirt noVNC
No worries,
If all is pointing to the correct files I would check permissions.
Regards,
Paul S.
________________________________
From: Anton Louw <Anton.Louw(a)voxtelecom.co.za<mailto:Anton.Louw@voxtelecom.co.za>>
Sent: 12 June 2020 09:34
To: Staniforth, Paul <P.Staniforth(a)leedsbeckett.ac.uk<mailto:P.Staniforth@leedsbeckett.ac.uk>>; users(a)ovirt.org<mailto:users@ovirt.org> <users(a)ovirt.org<mailto:users@ovirt.org>>
Subject: RE: oVirt noVNC
Caution External Mail: Do not click any links or open any attachments unless you trust the sender and know that the content is safe.
Hi Paul,
Thanks for the reply. Apologies, I should have added that I have installed our own certificates. The main problem I am facing is that the noVNC console just refuses to open, I get the attached error with any VM I try and access. I should have perhaps started with this issue in my first mail, apologies ?
Thanks
Anton Louw
Cloud Engineer: Storage and Virtualization at Vox
________________________________
T: 087 805 0000 | D: 087 805 1572
M: N/A
E: anton.louw(a)voxtelecom.co.za<mailto:anton.louw@voxtelecom.co.za>
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
www.vox.co.za<https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.vox....>
[F]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.fac...>
[T]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.twi...>
[I]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ins...>
[L]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.lin...>
[Y]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.you...>
From: Staniforth, Paul <P.Staniforth(a)leedsbeckett.ac.uk<mailto:P.Staniforth@leedsbeckett.ac.uk>>
Sent: 12 June 2020 10:29
To: users(a)ovirt.org<mailto:users@ovirt.org>; Anton Louw <Anton.Louw(a)voxtelecom.co.za<mailto:Anton.Louw@voxtelecom.co.za>>
Subject: Re: oVirt noVNC
Hello Anton,
if your organisation has it's own CA you can install your own certificates or get certificates from a trusted CA.
https://www.ovirt.org/documentation/admin-guide/appe-oVirt_and_SSL.html<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovi...>
Paul S.
________________________________
From: Anton Louw via Users <users(a)ovirt.org<mailto:users@ovirt.org>>
Sent: 12 June 2020 08:56
To: users(a)ovirt.org<mailto:users@ovirt.org> <users(a)ovirt.org<mailto:users@ovirt.org>>
Subject: [ovirt-users] oVirt noVNC
Caution External Mail: Do not click any links or open any attachments unless you trust the sender and know that the content is safe.
Hi Everybody,
With regards to noVNC, is it a requirement to install the CA into your local browser? I would like users to access their VM console, but with no additional work from their side, ie. Downloading the CA and importing it.
Thank you
Anton Louw
Cloud Engineer: Storage and Virtualization at Vox
________________________________
T: 087 805 0000 | D: 087 805 1572
M: N/A
E: anton.louw(a)voxtelecom.co.za<mailto:anton.louw@voxtelecom.co.za>
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
www.vox.co.za<https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.vox....>
[F]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.fac...>
[T]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.twi...>
[I]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ins...>
[L]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.lin...>
[Y]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.you...>
[#VoxBrand]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.vox...>
Disclaimer
The contents of this email are confidential to the sender and the intended recipient. Unless the contents are clearly and entirely of a personal nature, they are subject to copyright in favour of the holding company of the Vox group of companies. Any recipient who receives this email in error should immediately report the error to the sender and permanently delete this email from all storage devices.
This email has been scanned for viruses and malware, and may have been automatically archived by Mimecast Ltd, an innovator in Software as a Service (SaaS) for business. Providing a safer and more useful place for your human generated data. Specializing in; Security, archiving and compliance. To find out more Click Here<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.vox...>.
To view the terms under which this email is distributed, please go to:-
http://leedsbeckett.ac.uk/disclaimer/email/
To view the terms under which this email is distributed, please go to:-
http://leedsbeckett.ac.uk/disclaimer/email/
To view the terms under which this email is distributed, please go to:-
http://leedsbeckett.ac.uk/disclaimer/email/
5 years
Re: oVirt noVNC
by Kim Kargaard
Yes, in the end, it was a permission on the one CA file, that was set to 700 and should have been 750 (if I remember correctly).
From: Anton Louw <Anton.Louw(a)voxtelecom.co.za>
Date: Friday, 12 June 2020 at 12:01
To: Kim Kargaard <Kim.Kargaard(a)noroff.no>, "Staniforth, Paul" <P.Staniforth(a)leedsbeckett.ac.uk>, "users(a)ovirt.org" <users(a)ovirt.org>
Subject: RE: [ovirt-users] Re: oVirt noVNC
Hi Kim,
Hopefully 😊 I will still run through a couple of checks, I am sure it is something small I am missing. Was your issue due to owner and permissions?
Yes, for some of our offerings we do use oVirt.
Anton Louw
Cloud Engineer: Storage and Virtualization at Vox
________________________________
T: 087 805 0000 | D: 087 805 1572
M: N/A
E: anton.louw(a)voxtelecom.co.za<mailto:anton.louw@voxtelecom.co.za>
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
www.vox.co.za<http://www.vox.co.za>
[F]<https://www.facebook.com/voxtelecomZA>
[T]<https://www.twitter.com/voxtelecom>
[I]<https://www.instagram.com/voxtelecomza/>
[L]<https://www.linkedin.com/company/voxtelecom>
[Y]<https://www.youtube.com/user/VoxTelecom>
From: Kim Kargaard <Kim.Kargaard(a)noroff.no>
Sent: 12 June 2020 11:43
To: Anton Louw <Anton.Louw(a)voxtelecom.co.za>; Staniforth, Paul <P.Staniforth(a)leedsbeckett.ac.uk>; users(a)ovirt.org
Subject: Re: [ovirt-users] Re: oVirt noVNC
Hi Anton,
Don´t worry, it had me tearing out hair for a while. But, Paul managed to save my remaining hair, so hopefully he has a suggestion that will sort things out for you too 😊
By the way, is Vox using ovirt as their cloud system for customers? Just curious of course.
Kind regards
Kim
From: Anton Louw <Anton.Louw(a)voxtelecom.co.za<mailto:Anton.Louw@voxtelecom.co.za>>
Date: Friday, 12 June 2020 at 11:36
To: Kim Kargaard <Kim.Kargaard(a)noroff.no<mailto:Kim.Kargaard@noroff.no>>, "Staniforth, Paul" <P.Staniforth(a)leedsbeckett.ac.uk<mailto:P.Staniforth@leedsbeckett.ac.uk>>, "users(a)ovirt.org<mailto:users@ovirt.org>" <users(a)ovirt.org<mailto:users@ovirt.org>>
Subject: RE: [ovirt-users] Re: oVirt noVNC
Hi Kim,
Thanks for the reply. I double checked the permissions on the cert files now, and they are exactly the same as my other environment. But, the other environment does not have a CA, these are the default certs from ovirt. The other environment is working as expected though.
I have checked the websocket service and config, and it seems to be correct. The port is also open on the firewall. I can telnet to my FQDN on port 6100.
This is breaking my spirit 😊
Anton Louw
Cloud Engineer: Storage and Virtualization at Vox
________________________________
T: 087 805 0000 | D: 087 805 1572
M: N/A
E: anton.louw(a)voxtelecom.co.za<mailto:anton.louw@voxtelecom.co.za>
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
www.vox.co.za<http://www.vox.co.za>
[F]<https://www.facebook.com/voxtelecomZA>
[T]<https://www.twitter.com/voxtelecom>
[I]<https://www.instagram.com/voxtelecomza/>
[L]<https://www.linkedin.com/company/voxtelecom>
[Y]<https://www.youtube.com/user/VoxTelecom>
From: Kim Kargaard <Kim.Kargaard(a)noroff.no<mailto:Kim.Kargaard@noroff.no>>
Sent: 12 June 2020 10:51
To: Anton Louw <Anton.Louw(a)voxtelecom.co.za<mailto:Anton.Louw@voxtelecom.co.za>>; Staniforth, Paul <P.Staniforth(a)leedsbeckett.ac.uk<mailto:P.Staniforth@leedsbeckett.ac.uk>>; users(a)ovirt.org<mailto:users@ovirt.org>
Subject: Re: [ovirt-users] Re: oVirt noVNC
Have you checked that websocket proxy is configured and running? Is the port open on the firewall? And finally, have you checked the ownerships and permissions of the cert files on the engine server? The permissions was where we came unstuck for a while 😊 The individual users should not need to download the CA, the novnc browser option should just open the VM, if the settings are right.
From: Anton Louw via Users <users(a)ovirt.org<mailto:users@ovirt.org>>
Reply to: Anton Louw <Anton.Louw(a)voxtelecom.co.za<mailto:Anton.Louw@voxtelecom.co.za>>
Date: Friday, 12 June 2020 at 10:48
To: "Staniforth, Paul" <P.Staniforth(a)leedsbeckett.ac.uk<mailto:P.Staniforth@leedsbeckett.ac.uk>>, "users(a)ovirt.org<mailto:users@ovirt.org>" <users(a)ovirt.org<mailto:users@ovirt.org>>
Subject: [ovirt-users] Re: oVirt noVNC
Hi Paul,
Thanks for the reply. Apologies, I should have added that I have installed our own certificates. The main problem I am facing is that the noVNC console just refuses to open, I get the attached error with any VM I try and access. I should have perhaps started with this issue in my first mail, apologies 😊
Thanks
Anton Louw
Cloud Engineer: Storage and Virtualization at Vox
________________________________
T: 087 805 0000 | D: 087 805 1572
M: N/A
E: anton.louw(a)voxtelecom.co.za<mailto:anton.louw@voxtelecom.co.za>
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
www.vox.co.za<http://www.vox.co.za>
[F]<https://www.facebook.com/voxtelecomZA>
[T]<https://www.twitter.com/voxtelecom>
[I]<https://www.instagram.com/voxtelecomza/>
[L]<https://www.linkedin.com/company/voxtelecom>
[Y]<https://www.youtube.com/user/VoxTelecom>
From: Staniforth, Paul <P.Staniforth(a)leedsbeckett.ac.uk<mailto:P.Staniforth@leedsbeckett.ac.uk>>
Sent: 12 June 2020 10:29
To: users(a)ovirt.org<mailto:users@ovirt.org>; Anton Louw <Anton.Louw(a)voxtelecom.co.za<mailto:Anton.Louw@voxtelecom.co.za>>
Subject: Re: oVirt noVNC
Hello Anton,
if your organisation has it's own CA you can install your own certificates or get certificates from a trusted CA.
https://www.ovirt.org/documentation/admin-guide/appe-oVirt_and_SSL.html
Paul S.
________________________________
From: Anton Louw via Users <users(a)ovirt.org<mailto:users@ovirt.org>>
Sent: 12 June 2020 08:56
To: users(a)ovirt.org<mailto:users@ovirt.org> <users(a)ovirt.org<mailto:users@ovirt.org>>
Subject: [ovirt-users] oVirt noVNC
Caution External Mail: Do not click any links or open any attachments unless you trust the sender and know that the content is safe.
Hi Everybody,
With regards to noVNC, is it a requirement to install the CA into your local browser? I would like users to access their VM console, but with no additional work from their side, ie. Downloading the CA and importing it.
Thank you
Anton Louw
Cloud Engineer: Storage and Virtualization at Vox
________________________________
T: 087 805 0000 | D: 087 805 1572
M: N/A
E: anton.louw(a)voxtelecom.co.za<mailto:anton.louw@voxtelecom.co.za>
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
www.vox.co.za<https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.vox....>
[Image removed by sender. F]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.fac...>
[Image removed by sender. T]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.twi...>
[Image removed by sender. I]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ins...>
[Image removed by sender. L]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.lin...>
[Image removed by sender. Y]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.you...>
[Image removed by sender. #VoxBrand]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.vox...>
Disclaimer
The contents of this email are confidential to the sender and the intended recipient. Unless the contents are clearly and entirely of a personal nature, they are subject to copyright in favour of the holding company of the Vox group of companies. Any recipient who receives this email in error should immediately report the error to the sender and permanently delete this email from all storage devices.
This email has been scanned for viruses and malware, and may have been automatically archived by Mimecast Ltd, an innovator in Software as a Service (SaaS) for business. Providing a safer and more useful place for your human generated data. Specializing in; Security, archiving and compliance. To find out more Click Here<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.vox...>.
To view the terms under which this email is distributed, please go to:-
http://leedsbeckett.ac.uk/disclaimer/email/
5 years
Re: oVirt noVNC
by Anton Louw
Hi Paul,
Double checked the permissions as well. All seems to be fine. The only thing that does look different between the environments are the below:
ENV1 (Not working)
[cid:image001.png@01D640B1.B1BEAA20]
ENV2 (Working)
[cid:image007.png@01D640B1.E97498D0]
It seems that on the working environment, there is a shortcut file (apached-ca.pem) which points to the ca.pem file, but on the environment that is not working, the apache-ca.pem file is not a shortcut. Could this perhaps be an issue?
Thanks
Anton Louw
Cloud Engineer: Storage and Virtualization
______________________________________
D: 087 805 1572 | M: N/A
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
anton.louw(a)voxtelecom.co.za
www.vox.co.za
From: Staniforth, Paul <P.Staniforth(a)leedsbeckett.ac.uk>
Sent: 12 June 2020 10:44
To: Anton Louw <Anton.Louw(a)voxtelecom.co.za>; users(a)ovirt.org
Subject: Re: oVirt noVNC
No worries,
If all is pointing to the correct files I would check permissions.
Regards,
Paul S.
________________________________
From: Anton Louw <Anton.Louw(a)voxtelecom.co.za<mailto:Anton.Louw@voxtelecom.co.za>>
Sent: 12 June 2020 09:34
To: Staniforth, Paul <P.Staniforth(a)leedsbeckett.ac.uk<mailto:P.Staniforth@leedsbeckett.ac.uk>>; users(a)ovirt.org<mailto:users@ovirt.org> <users(a)ovirt.org<mailto:users@ovirt.org>>
Subject: RE: oVirt noVNC
Caution External Mail: Do not click any links or open any attachments unless you trust the sender and know that the content is safe.
Hi Paul,
Thanks for the reply. Apologies, I should have added that I have installed our own certificates. The main problem I am facing is that the noVNC console just refuses to open, I get the attached error with any VM I try and access. I should have perhaps started with this issue in my first mail, apologies 😊
Thanks
Anton Louw
Cloud Engineer: Storage and Virtualization at Vox
________________________________
T: 087 805 0000 | D: 087 805 1572
M: N/A
E: anton.louw(a)voxtelecom.co.za<mailto:anton.louw@voxtelecom.co.za>
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
www.vox.co.za<https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.vox....>
[F]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.fac...>
[T]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.twi...>
[I]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ins...>
[L]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.lin...>
[Y]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.you...>
From: Staniforth, Paul <P.Staniforth(a)leedsbeckett.ac.uk<mailto:P.Staniforth@leedsbeckett.ac.uk>>
Sent: 12 June 2020 10:29
To: users(a)ovirt.org<mailto:users@ovirt.org>; Anton Louw <Anton.Louw(a)voxtelecom.co.za<mailto:Anton.Louw@voxtelecom.co.za>>
Subject: Re: oVirt noVNC
Hello Anton,
if your organisation has it's own CA you can install your own certificates or get certificates from a trusted CA.
https://www.ovirt.org/documentation/admin-guide/appe-oVirt_and_SSL.html<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovi...>
Paul S.
________________________________
From: Anton Louw via Users <users(a)ovirt.org<mailto:users@ovirt.org>>
Sent: 12 June 2020 08:56
To: users(a)ovirt.org<mailto:users@ovirt.org> <users(a)ovirt.org<mailto:users@ovirt.org>>
Subject: [ovirt-users] oVirt noVNC
Caution External Mail: Do not click any links or open any attachments unless you trust the sender and know that the content is safe.
Hi Everybody,
With regards to noVNC, is it a requirement to install the CA into your local browser? I would like users to access their VM console, but with no additional work from their side, ie. Downloading the CA and importing it.
Thank you
Anton Louw
Cloud Engineer: Storage and Virtualization at Vox
________________________________
T: 087 805 0000 | D: 087 805 1572
M: N/A
E: anton.louw(a)voxtelecom.co.za<mailto:anton.louw@voxtelecom.co.za>
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
www.vox.co.za<https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.vox....>
[F]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.fac...>
[T]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.twi...>
[I]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ins...>
[L]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.lin...>
[Y]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.you...>
[#VoxBrand]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.vox...>
Disclaimer
The contents of this email are confidential to the sender and the intended recipient. Unless the contents are clearly and entirely of a personal nature, they are subject to copyright in favour of the holding company of the Vox group of companies. Any recipient who receives this email in error should immediately report the error to the sender and permanently delete this email from all storage devices.
This email has been scanned for viruses and malware, and may have been automatically archived by Mimecast Ltd, an innovator in Software as a Service (SaaS) for business. Providing a safer and more useful place for your human generated data. Specializing in; Security, archiving and compliance. To find out more Click Here<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.vox...>.
To view the terms under which this email is distributed, please go to:-
http://leedsbeckett.ac.uk/disclaimer/email/<http://leedsbeckett.ac.uk/disclaimer/email/>
To view the terms under which this email is distributed, please go to:-
http://leedsbeckett.ac.uk/disclaimer/email/<http://leedsbeckett.ac.uk/disclaimer/email/>
5 years
Re: oVirt noVNC
by Kim Kargaard
Hi Anton,
Don´t worry, it had me tearing out hair for a while. But, Paul managed to save my remaining hair, so hopefully he has a suggestion that will sort things out for you too 😊
By the way, is Vox using ovirt as their cloud system for customers? Just curious of course.
Kind regards
Kim
From: Anton Louw <Anton.Louw(a)voxtelecom.co.za>
Date: Friday, 12 June 2020 at 11:36
To: Kim Kargaard <Kim.Kargaard(a)noroff.no>, "Staniforth, Paul" <P.Staniforth(a)leedsbeckett.ac.uk>, "users(a)ovirt.org" <users(a)ovirt.org>
Subject: RE: [ovirt-users] Re: oVirt noVNC
Hi Kim,
Thanks for the reply. I double checked the permissions on the cert files now, and they are exactly the same as my other environment. But, the other environment does not have a CA, these are the default certs from ovirt. The other environment is working as expected though.
I have checked the websocket service and config, and it seems to be correct. The port is also open on the firewall. I can telnet to my FQDN on port 6100.
This is breaking my spirit 😊
Anton Louw
Cloud Engineer: Storage and Virtualization at Vox
________________________________
T: 087 805 0000 | D: 087 805 1572
M: N/A
E: anton.louw(a)voxtelecom.co.za<mailto:anton.louw@voxtelecom.co.za>
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
www.vox.co.za<http://www.vox.co.za>
[F]<https://www.facebook.com/voxtelecomZA>
[T]<https://www.twitter.com/voxtelecom>
[I]<https://www.instagram.com/voxtelecomza/>
[L]<https://www.linkedin.com/company/voxtelecom>
[Y]<https://www.youtube.com/user/VoxTelecom>
From: Kim Kargaard <Kim.Kargaard(a)noroff.no>
Sent: 12 June 2020 10:51
To: Anton Louw <Anton.Louw(a)voxtelecom.co.za>; Staniforth, Paul <P.Staniforth(a)leedsbeckett.ac.uk>; users(a)ovirt.org
Subject: Re: [ovirt-users] Re: oVirt noVNC
Have you checked that websocket proxy is configured and running? Is the port open on the firewall? And finally, have you checked the ownerships and permissions of the cert files on the engine server? The permissions was where we came unstuck for a while 😊 The individual users should not need to download the CA, the novnc browser option should just open the VM, if the settings are right.
From: Anton Louw via Users <users(a)ovirt.org<mailto:users@ovirt.org>>
Reply to: Anton Louw <Anton.Louw(a)voxtelecom.co.za<mailto:Anton.Louw@voxtelecom.co.za>>
Date: Friday, 12 June 2020 at 10:48
To: "Staniforth, Paul" <P.Staniforth(a)leedsbeckett.ac.uk<mailto:P.Staniforth@leedsbeckett.ac.uk>>, "users(a)ovirt.org<mailto:users@ovirt.org>" <users(a)ovirt.org<mailto:users@ovirt.org>>
Subject: [ovirt-users] Re: oVirt noVNC
Hi Paul,
Thanks for the reply. Apologies, I should have added that I have installed our own certificates. The main problem I am facing is that the noVNC console just refuses to open, I get the attached error with any VM I try and access. I should have perhaps started with this issue in my first mail, apologies 😊
Thanks
Anton Louw
Cloud Engineer: Storage and Virtualization at Vox
________________________________
T: 087 805 0000 | D: 087 805 1572
M: N/A
E: anton.louw(a)voxtelecom.co.za<mailto:anton.louw@voxtelecom.co.za>
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
www.vox.co.za<http://www.vox.co.za>
[F]<https://www.facebook.com/voxtelecomZA>
[T]<https://www.twitter.com/voxtelecom>
[I]<https://www.instagram.com/voxtelecomza/>
[L]<https://www.linkedin.com/company/voxtelecom>
[Y]<https://www.youtube.com/user/VoxTelecom>
From: Staniforth, Paul <P.Staniforth(a)leedsbeckett.ac.uk<mailto:P.Staniforth@leedsbeckett.ac.uk>>
Sent: 12 June 2020 10:29
To: users(a)ovirt.org<mailto:users@ovirt.org>; Anton Louw <Anton.Louw(a)voxtelecom.co.za<mailto:Anton.Louw@voxtelecom.co.za>>
Subject: Re: oVirt noVNC
Hello Anton,
if your organisation has it's own CA you can install your own certificates or get certificates from a trusted CA.
https://www.ovirt.org/documentation/admin-guide/appe-oVirt_and_SSL.html
Paul S.
________________________________
From: Anton Louw via Users <users(a)ovirt.org<mailto:users@ovirt.org>>
Sent: 12 June 2020 08:56
To: users(a)ovirt.org<mailto:users@ovirt.org> <users(a)ovirt.org<mailto:users@ovirt.org>>
Subject: [ovirt-users] oVirt noVNC
Caution External Mail: Do not click any links or open any attachments unless you trust the sender and know that the content is safe.
Hi Everybody,
With regards to noVNC, is it a requirement to install the CA into your local browser? I would like users to access their VM console, but with no additional work from their side, ie. Downloading the CA and importing it.
Thank you
Anton Louw
Cloud Engineer: Storage and Virtualization at Vox
________________________________
T: 087 805 0000 | D: 087 805 1572
M: N/A
E: anton.louw(a)voxtelecom.co.za<mailto:anton.louw@voxtelecom.co.za>
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
www.vox.co.za<https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.vox....>
[Image removed by sender. F]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.fac...>
[Image removed by sender. T]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.twi...>
[Image removed by sender. I]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ins...>
[Image removed by sender. L]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.lin...>
[Image removed by sender. Y]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.you...>
[Image removed by sender. #VoxBrand]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.vox...>
Disclaimer
The contents of this email are confidential to the sender and the intended recipient. Unless the contents are clearly and entirely of a personal nature, they are subject to copyright in favour of the holding company of the Vox group of companies. Any recipient who receives this email in error should immediately report the error to the sender and permanently delete this email from all storage devices.
This email has been scanned for viruses and malware, and may have been automatically archived by Mimecast Ltd, an innovator in Software as a Service (SaaS) for business. Providing a safer and more useful place for your human generated data. Specializing in; Security, archiving and compliance. To find out more Click Here<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.vox...>.
To view the terms under which this email is distributed, please go to:-
http://leedsbeckett.ac.uk/disclaimer/email/
5 years
Re: oVirt noVNC
by Kim Kargaard
Have you checked that websocket proxy is configured and running? Is the port open on the firewall? And finally, have you checked the ownerships and permissions of the cert files on the engine server? The permissions was where we came unstuck for a while 😊 The individual users should not need to download the CA, the novnc browser option should just open the VM, if the settings are right.
From: Anton Louw via Users <users(a)ovirt.org>
Reply to: Anton Louw <Anton.Louw(a)voxtelecom.co.za>
Date: Friday, 12 June 2020 at 10:48
To: "Staniforth, Paul" <P.Staniforth(a)leedsbeckett.ac.uk>, "users(a)ovirt.org" <users(a)ovirt.org>
Subject: [ovirt-users] Re: oVirt noVNC
Hi Paul,
Thanks for the reply. Apologies, I should have added that I have installed our own certificates. The main problem I am facing is that the noVNC console just refuses to open, I get the attached error with any VM I try and access. I should have perhaps started with this issue in my first mail, apologies 😊
Thanks
Anton Louw
Cloud Engineer: Storage and Virtualization at Vox
________________________________
T: 087 805 0000 | D: 087 805 1572
M: N/A
E: anton.louw(a)voxtelecom.co.za<mailto:anton.louw@voxtelecom.co.za>
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
www.vox.co.za<http://www.vox.co.za>
[F]<https://www.facebook.com/voxtelecomZA>
[T]<https://www.twitter.com/voxtelecom>
[I]<https://www.instagram.com/voxtelecomza/>
[L]<https://www.linkedin.com/company/voxtelecom>
[Y]<https://www.youtube.com/user/VoxTelecom>
From: Staniforth, Paul <P.Staniforth(a)leedsbeckett.ac.uk>
Sent: 12 June 2020 10:29
To: users(a)ovirt.org; Anton Louw <Anton.Louw(a)voxtelecom.co.za>
Subject: Re: oVirt noVNC
Hello Anton,
if your organisation has it's own CA you can install your own certificates or get certificates from a trusted CA.
https://www.ovirt.org/documentation/admin-guide/appe-oVirt_and_SSL.html
Paul S.
________________________________
From: Anton Louw via Users <users(a)ovirt.org<mailto:users@ovirt.org>>
Sent: 12 June 2020 08:56
To: users(a)ovirt.org<mailto:users@ovirt.org> <users(a)ovirt.org<mailto:users@ovirt.org>>
Subject: [ovirt-users] oVirt noVNC
Caution External Mail: Do not click any links or open any attachments unless you trust the sender and know that the content is safe.
Hi Everybody,
With regards to noVNC, is it a requirement to install the CA into your local browser? I would like users to access their VM console, but with no additional work from their side, ie. Downloading the CA and importing it.
Thank you
Anton Louw
Cloud Engineer: Storage and Virtualization at Vox
________________________________
T: 087 805 0000 | D: 087 805 1572
M: N/A
E: anton.louw(a)voxtelecom.co.za<mailto:anton.louw@voxtelecom.co.za>
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
www.vox.co.za<https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.vox....>
[Image removed by sender. F]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.fac...>
[Image removed by sender. T]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.twi...>
[Image removed by sender. I]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ins...>
[Image removed by sender. L]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.lin...>
[Image removed by sender. Y]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.you...>
[Image removed by sender. #VoxBrand]<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.vox...>
Disclaimer
The contents of this email are confidential to the sender and the intended recipient. Unless the contents are clearly and entirely of a personal nature, they are subject to copyright in favour of the holding company of the Vox group of companies. Any recipient who receives this email in error should immediately report the error to the sender and permanently delete this email from all storage devices.
This email has been scanned for viruses and malware, and may have been automatically archived by Mimecast Ltd, an innovator in Software as a Service (SaaS) for business. Providing a safer and more useful place for your human generated data. Specializing in; Security, archiving and compliance. To find out more Click Here<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.vox...>.
To view the terms under which this email is distributed, please go to:-
http://leedsbeckett.ac.uk/disclaimer/email/
5 years
