April 2021 - Users - oVirt List Archives

[ANN] oVirt 4.4.6 Sixth Release Candidate is now available for testing
by Lev Veyde 29 Apr '21

29 Apr '21

oVirt 4.4.6 Sixth Release Candidate is now available for testing The oVirt Project is pleased to announce the availability of oVirt 4.4.6 Sixth Release Candidate for testing, as of April 29th, 2021. This update is the sixth in a series of stabilization updates to the 4.4 series. How to prevent hosts entering emergency mode after upgrade from oVirt 4.4.1 Note: Upgrading from 4.4.2 GA or later should not require re-doing these steps, if already performed while upgrading from 4.4.1 to 4.4.2 GA. These are only required to be done once. Due to Bug 1837864 <https://bugzilla.redhat.com/show_bug.cgi?id=1837864> - Host enter emergency mode after upgrading to latest build If you have your root file system on a multipath device on your hosts you should be aware that after upgrading from 4.4.1 to 4.4.6 you may get your host entering emergency mode. In order to prevent this be sure to upgrade oVirt Engine first, then on your hosts: 1. Remove the current lvm filter while still on 4.4.1, or in emergency mode (if rebooted). 2. Reboot. 3. Upgrade to 4.4.6 (redeploy in case of already being on 4.4.6). 4. Run vdsm-tool config-lvm-filter to confirm there is a new filter in place. 5. Only if not using oVirt Node: - run "dracut --force --add multipath” to rebuild initramfs with the correct filter configuration 6. Reboot. Documentation - If you want to try oVirt as quickly as possible, follow the instructions on the Download <https://ovirt.org/download/> page. - For complete installation, administration, and usage instructions, see the oVirt Documentation <https://ovirt.org/documentation/>. - For upgrading from a previous version, see the oVirt Upgrade Guide <https://ovirt.org/documentation/upgrade_guide/>. - For a general overview of oVirt, see About oVirt <https://ovirt.org/community/about.html>. Important notes before you try it Please note this is a pre-release build. The oVirt Project makes no guarantees as to its suitability or usefulness. This pre-release must not be used in production. Installation instructions For installation instructions and additional information please refer to: https://ovirt.org/documentation/ This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 8.3 or newer * CentOS Linux (or similar) 8.3 or newer * CentOS Stream 8 This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 8.3 or newer * CentOS Linux (or similar) 8.3 or newer * CentOS Stream 8 * oVirt Node 4.4 based on CentOS Stream 8 (available for x86_64 only) See the release notes [1] for installation instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available based on CentOS Stream 8 - oVirt Node NG is already available based on CentOS Stream 8 Additional Resources: * Read more about the oVirt 4.4.6 release highlights: http://www.ovirt.org/release/4.4.6/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.4.6/ [2] http://resources.ovirt.org/pub/ovirt-4.4-pre/iso/ -- Lev Veyde Senior Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

how to enable HA for all vms and entire cluster at global settings
by dhanaraj.ramesh＠yahoo.com 29 Apr '21

29 Apr '21

Hi Team instead of enabling HA for each vm one by one, I want to enable HA for all vms that is already running in the cluster and also for the future vms that going to be installed. I already did configure HA reservation at the cluster level, any other settings or commands I should configure? how I can achieve the above

1 0

Unable to provide network acces to second cluster in DC
by Miguel Garcia 28 Apr '21

28 Apr '21

I have created the following DC and cluster structure in my ovirt server - Data Center Public - - cluster-public1 - - cluster-public2 Also created a couple Logical Network for DC-Public - - prodvlan - - havlan And added 4 host (two for each cluster because processor type) and each host has ports added to both logical networks (besides ovirtmgmt) When I create a new vm in cluster public1 and add nics I'm able to list prodvlan and havlan but when I try to create the vm for cluster public2 no logical networks are listed. Any idea how to get logical networks listed for cluster public2? Thanks in advance

2 1

Restoring hosted engine from backup fails on new FC storage domain creation
by Juhani Rautiainen 28 Apr '21

28 Apr '21

Hi! I started the upgrade from 4.3->4.4. Now I'm stuck as restoring the backup fails to create the correct storage domain for Hosted Engine. How can I create one? Error from ansible task is: [ ERROR ] ovirtsdk4.Error: Fault reason is "Operation Failed". Fault detail is "[Domain format is different from master storage domain format]". HTTP response code is 400. [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "Fault reason is \"Operation Failed\". Fault detail is \"[Domain format is different from master storage domain format]\". HTTP response code is 400."} And from UI I can see that what has been created is a data domain. Not data (master) domain as old one was. Now I'm stuck here. This is a fibre channel system where I'm trying to do this if it is relevant. What I could find from the logs is this: 2021-04-27 09:36:06,925+0300 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:105 storage_domain_details: {'changed': False, 'ovirt_storage_domains': [{'href': '/ovirt-engine/api/storagedomains/dd52022b-7616-47f6-9534-6f1a4084fdf4', 'comment': '', 'description': '', 'id': 'dd52022b-7616-47f6-9534-6f1a4084fdf4', 'name': 'hosted_storage', 'available': 531502202880, 'backup': False, 'block_size': 512, 'committed': 0, 'critical_space_action_blocker': 5, 'discard_after_delete': True, 'disk_profiles': [], 'disk_snapshots': [], 'disks': [], 'external_status': 'ok', 'master': False, 'permissions': [], 'status': 'unattached', 'storage': {'type': 'fcp', 'volume_group': {'id': 'HRLDCn-p7X2-5X2O-vm4h-1Wb9-wAMu-WkIwit', 'logical_units': [{'discard_max_size': 268435456, 'discard_zeroes_data': False, 'id': '36000d31005b4f6000000000000000029', 'lun_mapping': 3, 'paths': 0, 'product_id': 'Compellent Vol', 'serial': 'SCOMPELNTCompellent_Vol_0005b4f6-00000029', 'size': 536870912000, 'storage_domain_id': 'dd52022b-7616-47f6-9534-6f1a4084fdf4', 'vendor_id': 'COMPELNT', 'volume_group_id': 'HRLDCn-p7X2-5X2O-vm4h-1Wb9-wAMu-WkIwit'}]}}, 'storage_connections': [], 'storage_format': 'v5', 'supports_discard': True, 'supports_discard_zeroes_data': False, 'templates': [], 'type': 'data', 'used': 4294967296, 'vms': [], 'warning_low_space_indicator': 10, 'wipe_after_delete': False}], 'failed': False} 'master': False? I'm not sure if this creation or check. I tried this opration twice. I removed the new hosted_storage and remove also old hosted_engine domain on second try to make sure that it doesn't prevent creation of another master. No luck with that. Thanks, Juhani

3 14

Import VM with Xen Based in Ovirt
by hemaa＠emiratesnbd.com 28 Apr '21

28 Apr '21

Hi All, I am trying to migrate a VM from a Xen Based virtualization to Ovirt with the import option in GUI But I am not able to list any stopped VMs on the Xen host. So what I did is I started the VM and got it listed. Then selected the VM and moved to right hand section. Clicked on next button. But then it gave an error "All chosen VMs couldn't be retrieved by the external system and therefore have been filtered. Please see log for details." When I check the libvirt logs in xen hypervisor I see error as below. There is no other errors in engine logs or vdsm logs 2021-04-22 08:52:36.796+0000: 30219: error : do_connect:116 : internal error: failed to connect to xend 2021-04-22 08:52:36.830+0000: 30219: error : virNodeSuspendSupportsTarget:332 : internal error: Cannot probe for supported suspend types 2021-04-22 08:52:36.830+0000: 30219: warning : xenHypervisorMakeCapabilities:2550 : Failed to get host power management capabilities 2021-04-22 08:52:36.832+0000: 30220: error : virConnectListAllDomains:6803 : this function is not supported by the connection driver: virConnectListAllDomains This is the same error I got when I tried importing a running VM as well. Any idea on what could be a possible reason behind this?

5 5

Faild ovirt-websocket-proxy.
by jesado74＠gmail.com 28 Apr '21

28 Apr '21

Hello again. After getting the hosted-engine vm back, now I have the following problem. I can't use the graphic console. The websocket-proy fails me. Surely when I update the certificates I have missed some intermediate step, but I do not know how to follow. Anyone know of a link to follow the certificate change procedure in the websocket-proxy service. Thank you. PS: Here I leave the output of the service: ● ovirt-websocket-proxy.service - oVirt Engine websockets proxy Loaded: loaded (/usr/lib/systemd/system/ovirt-websocket-proxy.service; enabled; vendor preset: disabled) Active: failed (Result: exit-code) since Wed 2021-04-28 02:03:54 UTC; 7h ago Process: 1694 ExecStart = / usr / share / ovirt-engine / services / ovirt-websocket-proxy / ovirt-websocket-proxy.py --systemd = notify $ EXTRA_ARGS start (code = exited, status = 1 / FAILURE) Main PID: 1694 (code = exited, status = 1 / FAILURE) Apr 28 02:03:53 ovirt.myhostedengine.com systemd [1]: Starting oVirt Engine websockets proxy ... Apr 28 02:03:54 ovirt.myhostedengine.com ovirt-websocket [1694]: 2021-04-28 02: 03: 54,614 + 0000 ovirt-websocket-proxy: ERROR run: 554 Error: SSL_ONLY is set but SSL_CERTIFICATE or SSL_KEY file not found. Apr 28 02:03:54ovirt.hostedengine.com ovirt-websocket-proxy.py [1694]: ovirt-websocket-proxy [1694] ERROR run: 554 Error: SSL_ONLY is set but SSL_CERTIFICATE or SSL_KEY file not found. Apr 28 02:03:54 ovirt.myhostedengine.com systemd [1]: ovirt-websocket-proxy.service: main process exited, code = exited, status = 1 / FAILURE Apr 28 02:03:54 ovirt.myhostedengine.com systemd [1]: Failed to start oVirt Engine websockets proxy. Apr 28 02:03:54 ovirt.myhostedengine.com systemd [1]: Unit ovirt-websocket-proxy.service entered failed state. Apr 28 02:03:54 ovirt.myhostedengine.com systemd [1]: ovirt-websocket-proxy.service failed. Sorry if I say any inconsistencies, but I'm new to this whole ovirt topic. Thanks again.

2 1

How i can set vnic while Create VM
by ovirt.org＠nevim.eu 28 Apr '21

28 Apr '21

How i can set vnic while Create VM via rest-api? I mean this (on screenshot), how to via rest-api? https://prnt.sc/126trb8 Thanks very much.

1 0

Ovirt-engine Setup Error-Failed to execute stage 'Misc configuration
by rajkumar madhu 28 Apr '21

28 Apr '21

Hi Team, Unable to install Ovirt in my centos server.while executing Engine-setup command ,I am getting below error.Please help me on this . Please confirm installation settings (OK, Cancel) [OK]: [ INFO ] Stage: Transaction setup [ INFO ] Stopping engine service [ INFO ] Stopping ovirt-fence-kdump-listener service [ INFO ] Stopping dwh service [ INFO ] Stopping vmconsole-proxy service [ INFO ] Stopping websocket-proxy service [ INFO ] Stage: Misc configuration (early) [ INFO ] Stage: Package installation [ INFO ] Stage: Misc configuration [ ERROR ] Failed to execute stage 'Misc configuration': [Errno 2] No such file or directory: '/etc/ovirt-engine/extensions.d' [ INFO ] DNF Performing DNF transaction rollback [ INFO ] Stage: Clean up Log file is located at /var/log/ovirt-engine/setup/ovirt-engine-setup-20210427090149-r0i80v.log [ INFO ] Generating answer file '/var/lib/ovirt-engine/setup/answers/20210427090311-setup.conf' [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Execution of setup failed Regards, Rajkumar M. 9176772077

2 4

Ovirt 4.4.6.5-1 engine-setup failed
by Don Dupuis 28 Apr '21

28 Apr '21

I am installing Ovirt 4.4.6.5-1 engine on CentOS Stream 8 on a dedicated vm. Towards the end of the engine-setup session I have a failure: [ INFO ] Stage: Transaction setup [ INFO ] Stopping engine service [ INFO ] Stopping ovirt-fence-kdump-listener service [ INFO ] Stopping dwh service [ INFO ] Stopping vmconsole-proxy service [ INFO ] Stopping websocket-proxy service [ INFO ] Stage: Misc configuration (early) [ INFO ] Stage: Package installation [ INFO ] Stage: Misc configuration [ INFO ] Upgrading CA [ INFO ] Initializing PostgreSQL [ INFO ] Creating PostgreSQL 'engine' database [ INFO ] Configuring PostgreSQL [ INFO ] Creating PostgreSQL 'ovirt_engine_history' database [ INFO ] Configuring PostgreSQL [ INFO ] Creating CA: /etc/pki/ovirt-engine/ca.pem [ INFO ] Creating CA: /etc/pki/ovirt-engine/qemu-ca.pem [ INFO ] Updating OVN SSL configuration [ INFO ] Updating OVN timeout configuration [ INFO ] Creating/refreshing DWH database schema [ INFO ] Setting up ovirt-vmconsole proxy helper PKI artifacts [ INFO ] Setting up ovirt-vmconsole SSH PKI artifacts [ INFO ] Configuring WebSocket Proxy [ INFO ] Creating/refreshing Engine database schema [ INFO ] Creating a user for Grafana [ INFO ] Creating/refreshing Engine 'internal' domain database schema [ INFO ] Creating default mac pool range [ INFO ] Adding default OVN provider to database [ INFO ] Adding OVN provider secret to database [ INFO ] Setting a password for internal user admin [ INFO ] Install selinux module /usr/share/ovirt-engine/selinux/ansible-runner-service.cil [ INFO ] Generating post install configuration file '/etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf' [ INFO ] Stage: Transaction commit [ INFO ] Stage: Closing up [ INFO ] Starting engine service [ INFO ] Starting dwh service [ INFO ] Starting Grafana service [ ERROR ] Failed to execute stage 'Closing up': Failed to start service 'ovirt-imageio' [ INFO ] Stage: Clean up Log file is located at /var/log/ovirt-engine/setup/ovirt-engine-setup-20210426111225-g31wa5.log [ INFO ] Generating answer file '/var/lib/ovirt-engine/setup/answers/20210426111501-setup.conf' [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Execution of setup failed Below is output of /var/log/ovirt-imageio/daemon.log: 2021-04-26 11:15:01,481 ERROR (MainThread) [server] Server failed Traceback (most recent call last): File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 46, in main server = Server(cfg) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/server.py", line 110, in __init__ self.remote_service = services.RemoteService(self.config, self.auth) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/services.py", line 73, in __init__ self._server = http.Server((config.remote.host, port), http.Connection) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 91, in __init__ self.create_socket(prefer_ipv4) File "/usr/lib64/python3.6/site-packages/ovirt_imageio/_internal/http.py", line 123, in create_socket self.socket = socket.socket(self.address_family, self.socket_type) File "/usr/lib64/python3.6/socket.py", line 144, in __init__ _socket.socket.__init__(self, family, type, proto, fileno) OSError: [Errno 97] Address family not supported by protocol I am not seeing errors in /var/log/ovirt-engine/setup/setup.log. What other information do you need that is revelant to this issue? Thanks Don

3 8

Brick didn't come up after planned Poweroutage
by Marcel d'Heureuse 27 Apr '21

27 Apr '21

Hi Guys, We hat a planned power outage and we have stopped all VMS and try to keep the servers alive as long as possible. Some Servers made a Reboot by itself but the IPMI interface was not reachable for the engine. The some hosts have made a restart. Now all systems running and all 180 VMs too. But one Brick of the hosted engine didn't come up. Did you have an idea. Please find attached some screenshots. Our Hosted Engine has 6 bricks on 6 different Servers. A restart of the Host didn't work. The Server Restart of glusterd didn't work. I hope you have some more Ideas? Thanks Br Marcel

2 1