September 2023 - Users - oVirt List Archives

Configure OVN for oVirt failing - vdsm.tool.ovn_config.NetworkNotFoundError: hostname
by huw.m＠twinstream.com 12 Jan '24

12 Jan '24

Hello, When installing the self-hosted engine using rocky 9 as a host (using nightly builds), the install gets as far as running the below ansible task from ovirt-engine - name: Configure OVN for oVirt ansible.builtin.command: > vdsm-tool ovn-config {{ ovn_central }} {{ ovn_tunneling_interface }} {{ ovn_host_fqdn }} This command gets executed as vdsm-tool ovn-config 192.168.57.4 hostname.my.project.com and fails with error "stderr" : "Traceback (most recent call last):\n File \"/usr/lib/python3.9/site-packages/vdsm/tool/ovn_config.py\", line 117, in get_network\n return networks[net_name]\nKeyError: 'virt-1.local.hyp.twinstream.com'\n\nDuring handling of the above exception, another exception occurred:\n\nTraceback (most recent call last):\n File \"/usr/bin/vdsm-tool\", line 195, in main\n return tool_command[cmd][\"command\"](*args)\n File \"/usr/lib/python3.9/site-packages/vdsm/tool/ovn_config.py\", line 63, in ovn_config\n ip_address = get_ip_addr(get_network(network_caps(), net_name))\n File \"/usr/lib/python3.9/site-packages/vdsm/tool/ovn_config.py\", line 119, in get_network\n raise NetworkNotFoundError(net_name)\nvdsm.tool.ovn_config.NetworkNotFoundError: hostname.my.project.com" Running `vdsm-tool list-nets` on the host gives an empty list. `ip a` gives 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000 link/ether 52:54:00:6d:16:65 brd ff:ff:ff:ff:ff:ff altname enp0s6 altname ens6 inet 192.168.121.29/24 brd 192.168.121.255 scope global dynamic noprefixroute eth0 valid_lft 2482sec preferred_lft 2482sec inet6 fe80::5054:ff:fe6d:1665/64 scope link valid_lft forever preferred_lft forever 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000 link/ether 52:54:00:6b:f4:7b brd ff:ff:ff:ff:ff:ff altname enp0s7 altname ens7 inet 192.168.56.151/24 brd 192.168.56.255 scope global noprefixroute eth1 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe6b:f47b/64 scope link valid_lft forever preferred_lft forever 4: eth2: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc fq_codel master bond0 state UP group default qlen 1000 link/ether 52:54:00:8f:40:45 brd ff:ff:ff:ff:ff:ff altname enp0s8 altname ens8 5: eth3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000 link/ether 52:54:00:2f:27:9d brd ff:ff:ff:ff:ff:ff altname enp0s9 altname ens9 6: eth4: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc fq_codel master bondstorage state UP group default qlen 1000 link/ether 52:54:00:b8:9b:d7 brd ff:ff:ff:ff:ff:ff altname enp0s10 altname ens10 7: eth5: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000 link/ether 52:54:00:c2:9a:bd brd ff:ff:ff:ff:ff:ff altname enp0s11 altname ens11 8: eth6: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc fq_codel master bondvm state UP group default qlen 1000 link/ether 52:54:00:ed:f7:cc brd ff:ff:ff:ff:ff:ff altname enp0s12 altname ens12 9: eth7: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000 link/ether 52:54:00:de:8a:48 brd ff:ff:ff:ff:ff:ff altname enp0s13 altname ens13 10: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 52:54:00:8f:40:45 brd ff:ff:ff:ff:ff:ff inet 192.168.57.4/24 brd 192.168.57.255 scope global noprefixroute bond0 valid_lft forever preferred_lft forever inet6 fe80::5054:ff:fe8f:4045/64 scope link valid_lft forever preferred_lft forever 11: bondvm: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 52:54:00:ed:f7:cc brd ff:ff:ff:ff:ff:ff inet6 fe80::5054:ff:feed:f7cc/64 scope link valid_lft forever preferred_lft forever 12: bondstorage: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 52:54:00:b8:9b:d7 brd ff:ff:ff:ff:ff:ff inet 192.168.59.4/24 brd 192.168.59.255 scope global noprefixroute bondstorage valid_lft forever preferred_lft forever inet6 fe80::5054:ff:feb8:9bd7/64 scope link valid_lft forever preferred_lft forever 13: bondvm.20@bondvm: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 52:54:00:ed:f7:cc brd ff:ff:ff:ff:ff:ff inet6 fe80::5054:ff:feed:f7cc/64 scope link valid_lft forever preferred_lft forever 15: virbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 52:54:00:b2:5f:e2 brd ff:ff:ff:ff:ff:ff inet 192.168.222.1/24 brd 192.168.222.255 scope global virbr0 valid_lft forever preferred_lft forever 16: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master virbr0 state UNKNOWN group default qlen 1000 link/ether fe:16:3e:34:3d:ea brd ff:ff:ff:ff:ff:ff inet6 fe80::fc16:3eff:fe34:3dea/64 scope link valid_lft forever preferred_lft forever 47: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 6e:27:5f:fa:e3:3a brd ff:ff:ff:ff:ff:ff 48: ovs-system: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 12:7c:d9:2e:cf:26 brd ff:ff:ff:ff:ff:ff 49: br-int: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether a2:35:6e:5e:4c:60 brd ff:ff:ff:ff:ff:ff bond0 was selected as the ovirtmgmt bridge NIC. It currently only has one member interface eth2 using balance-xor. In the ovirt management console I can the see host in a down state and given the rest of the playbook ran which requires ssh connectivity between hosted-engine and host, I believe the network is generally setup correctly. No other immediate errors I can. As vdsm-tool ovn-config expects a network to exist with value of the hostname, what is meant to be creating this on the host? Thanks, Huw

2 3

how to renew expired ovirt node vdsm cert manually ?
by dhanaraj.ramesh＠yahoo.com 11 Jan '24

11 Jan '24

below are the steps to renew the expired vdsm cert of ovirt node # To check CERT expired # openssl x509 -in /etc/pki/vdsm/certs/vdsmcert.pem -noout -dates 1. Backup vdsm folder # cd /etc/pki # mv vdsm vdsm.orig # mkdir vdsm ; chown vdsm:kvm vdsm # cd vdsm # mkdir libvirt-vnc certs keys libvirt-spice libvirt-migrate # chown vdsm:kvm libvirt-vnc certs keys libvirt-spice libvirt-migrate 2. Regenerate cert & keys # vdsm-tool configure --module certificates 3. Copy the cert to destination location chmod 440 /etc/pki/vdsm/keys/vdsmkey.pem chown root /etc/pki/vdsmcerts/*pem chmod 644 /etc/pki/vdsmcerts/*pem cp /etc/pki/vdsm/certs/cacert.pem /etc/pki/vdsm/libvirt-spice/ca-cert.pem cp /etc/pki/vdsm/keys/vdsmkey.pem /etc/pki/vdsm/libvirt-spice/server-key.pem cp /etc/pki/vdsm/certs/vdsmcert.pem /etc/pki/vdsm/libvirt-spice/server-cert.pem cp /etc/pki/vdsm/certs/cacert.pem /etc/pki/vdsm/libvirt-vnc/ca-cert.pem cp /etc/pki/vdsm/keys/vdsmkey.pem /etc/pki/vdsm/libvirt-vnc/server-key.pem cp /etc/pki/vdsm/certs/vdsmcert.pem /etc/pki/vdsm/libvirt-vnc/server-cert.pem cp -p /etc/pki/vdsm/certs/cacert.pem /etc/pki/vdsm/libvirt-migrate/ca-cert.pem cp -p /etc/pki/vdsm/keys/vdsmkey.pem /etc/pki/vdsm/libvirt-migrate/server-key.pem cp -p /etc/pki/vdsm/certs/vdsmcert.pem /etc/pki/vdsm/libvirt-migrate/server-cert.pem chown root:qemu /etc/pki/vdsm/libvirt-migrate/server-key.pem cp -p /etc/pki/vdsm.orig/keys/libvirt_password /etc/pki/vdsm/keys/ mv /etc/pki/libvirt/clientcert.pem /etc/pki/libvirt/clientcert.pem.orig mv /etc/pki/libvirt/private/clientkey.pem /etc/pki/libvirt/private/clientkey.pem.orig mv /etc/pki/CA/cacert.pem /etc/pki/CA/cacert.pem.orig cp -p /etc/pki/vdsm/certs/vdsmcert.pem /etc/pki/libvirt/clientcert.pem cp -p /etc/pki/vdsm/keys/vdsmkey.pem /etc/pki/libvirt/private/clientkey.pem cp -p /etc/pki/vdsm/certs/cacert.pem /etc/pki/CA/cacert.pem 3. cross check the backup folder /etc/pki/vdsm.orig vs /etc/pki/vdsm # refer to /etc/pki/vdsm.orig/*/ and set the correct owner & group permission in /etc/pki/vdsm/*/ 4. restart services # Make sure both services are up systemctl restart vdsmd libvirtd

5 4

Grafana - Origin Not Allowed
by Maton, Brett 14 Dec '23

14 Dec '23

oVirt 4.5.0.8-1.el8 I tried to connect to grafana via the monitoring portal link from the dash and all panels are failing to display any data with varying error messages, but all include 'Origin Not Allowed' I navigated to Data Sources and ran a test on the PostgreSQL connection (localhost) which threw the same Origin Not Allowed error message. Any suggestions?

6 8

Gluster: Ideas for migration
by jonas＠rabe.ch 10 Nov '23

10 Nov '23

Hello I have to migrate the Gluster volumes from an old oVirt cluster to a newly built one. I looked into migration strategies, but everything that Red Hat recommends is related to replacing old bricks. In a testing environment I created two clusters and wanted to migrate one volume after the other. Unfortunately that fails because a node cannot be part of two clusters at the same time. The next thing I see, is to recreate the volumes on the new cluster, then constantly rsync the files from the old cluster to the new one and at a specified point in time make the cut over where I stop the applicaiton, do a final rsync and remount the new volume under the old path. Is there any other, nicer way I could accomplish migrating a volume from one Gluster cluster to another?

2 1

Multiple hosts stuck in Connecting state waiting for storage pool to go up.
by ivan.lezhnjov.iv＠gmail.com 06 Nov '23

06 Nov '23

Hi! We have a problem with multiple hosts stuck in Connecting state, which I hoped somebody here could help us wrap our heads around. All hosts, except one, seem to have very similar symptoms but I'll focus on one host that represents the rest. So, the host is stuck in Connecting state and this what we see in oVirt log files. /var/log/ovirt-engine/engine.log: 2023-04-20 09:51:53,021+03 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesAsyncVDSCommand] (EE-ManagedScheduledExecutorService-engineScheduledThreadPool-Thread-37) [] Command 'GetCapabilitiesAsyncVDSCommand(HostName = ABC010-176-XYZ, VdsIdAndVdsVDSCommandParametersBase:{hostId='2c458562-3d4d-4408-afc9-9a9484984a91', vds='Host[ABC010-176-XYZ,2c458562-3d4d-4408-afc9-9a9484984a91]'})' execution failed: org.ovirt.vdsm.jsonrpc.client.ClientConnectionException: SSL session is invalid 2023-04-20 09:55:16,556+03 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedScheduledExecutorService-engineScheduledThreadPool-Thread-67) [] EVENT_ID: VDS_BROKER_COMMAND_FAILURE(10,802), VDSM ABC010-176-XYZ command Get Host Capabilities failed: Message timeout which can be caused by communication issues /var/log/vdsm/vdsm.log: 2023-04-20 17:48:51,977+0300 INFO (vmrecovery) [vdsm.api] START getConnectedStoragePoolsList() from=internal, task_id=ebce7c8c-6ded-454e-9aee-86edf72764ef (api:31) 2023-04-20 17:48:51,977+0300 INFO (vmrecovery) [vdsm.api] FINISH getConnectedStoragePoolsList return={'poollist': []} from=internal, task_id=ebce7c8c-6ded-454e-9aee-86edf72764ef (api:37) 2023-04-20 17:48:51,978+0300 INFO (vmrecovery) [vds] recovery: waiting for storage pool to go up (clientIF:723) Both engine.log and vdsm.log are flooded with these messages. They are repeated at regular intervals ad infinitum. This is one common symptom shared by multiple hosts in our deployment. They all have these message loops in engine.log and vdsm.log files. On all Running vdsm-client Host getConnectedStoragePools also returns an empty list represented by [] on all hosts (but interestingly there is one that showed Storage Pool UUID and yet it was still stuck in Connecting state). This particular host (ABC010-176-XYZ) is connected to 3 CEPH iSCSI Storage Domains and lsblk shows 3 block devices with matching UUIDs in their device components. So, the storage seems to be connected but the Storage Pool is not? How is that even possible? Now, what's even more weird is that we tried rebooting the host (via Administrator Portal) and it didn't help. We even tried removing and re-adding the host in Administrator Portal but to no avail. Additionally, the host refused to go into Maintenance mode so we had to enforce it by manually updating Engine DB. We also tried reinstalling the host via Administrator Portal and ran into another weird problem, which I'm not sure if it's a related one or a problem that deserves a dedicated discussion thread but, basically, the underlying Ansible playbook exited with the following error message: "stdout" : "fatal: [10.10.10.176]: UNREACHABLE! => {\"changed\": false, \"msg\": \"Data could not be sent to remote host \\\"10.10.10.176\\\". Make sure this host can be reached over ssh: \", \"unreachable\": true}", Counterintuitively, just before running Reinstall via Administrator Portal we had been able to reboot the same host (which as you know oVirt does via Ansible as well). So, no changes on the host in between just different Ansible playbooks. To confirm that we actually had access to the host over ssh we successfully ran ssh -p $PORT root(a)10.10.10.176 -i /etc/pki/ovirt-engine/keys/engine_id_rsa and it worked. That made us scratch our heads for a while but what seems to had fixed Ansible's ssh access problems was manual full stop of all VDSM-related systemd services on the host. It was just a wild guess but as soon as we stopped all VDSM services Ansible stopped complaining about not being able to reach the target host and successfully did its job. I'm sure you'd like to see more logs but I'm not certain what exactly is relevant. There are a ton of logs as this deployment is comprised of nearly 80 hosts. So, I guess it's best if you just request to see specific logs, messages or configuration details and I'll cherry-pick what's relevant. We don't really understand what's going on and would appreciate any help. We tried just about anything we could think of to resolve this issue and are running out of ideas what to do next. If you have any questions just ask and I'll do my best to answer them.

2 4

Direct LUN I/O errors with SCSI Pass-through enabled
by mgs＠ordix.de 03 Nov '23

03 Nov '23

Hi, in our environment (Version 4.4.10.7) we use fibre channel LUNs, which we attach directly to the VMs (as Direct LUN) with VirtIO-SCSI and SCSI pass-through enabled. The virtual machines run an application that requires 4096 as physical_block_size and 512 as logical_block_size. For this reason, we had to enable SCSI pass-through. Only with SCSI pass-through the correct physical_block_size is passed through to the VM. Now we have the following problem on just about every VM: Error messages of the following form occur in the VMs (in /var/log/messages): kernel: blk_update_request: I/O error, dev sdd, sector 352194592 op 0x1:(WRITE) flags 0xc800 phys_seg 16 prio class 0 This error message coincides with a crash of the application. The error message seems to belong to SCSI. We are currently trying to find an alternative to SCSI pass-through. We want to use VirtIO and somehow pass the physical_block_size. Since the XML files of the VMs are transient, we cannot make any changes there. Does anyone have an idea what the error could be or how to pass the correct physical_block_size? Could VDSM hooks help with this? Thank you and regards Miguel

2 1

Re: Failed to synchronize networks of Provider ovirt-provider-ovn
by Mail SET Inc. Group 27 Oct '23

27 Oct '23

Yes, i use same manual to change WebUI SSL. ovirt-ca-file= is a same SSL file which use WebUI. Yes, i restart ovirt-provider-ovn, i restart engine, i restart all what i can restart. Nothing... > 12 сент. 2018 г., в 16:11, Dominik Holler <dholler(a)redhat.com> написал(а): > > On Wed, 12 Sep 2018 14:23:54 +0300 > "Mail SET Inc. Group" <mail(a)set-pro.net> wrote: > >> Ok! > > Not exactly, please use users(a)ovirt.org for such questions. > Other should benefit from this questions, too. > Please write the next mail to users(a)ovirt.org and keep me in CC. > >> What i did: >> >> 1) install oVirt «from box» (4.2.5.2-1.el7); >> 2) generate own ssl for my engine using my FreeIPA CA, Install it and > > What means "Install it"? You can use the doc from the following link > https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.2/ht… > > Ensure that ovirt-ca-file= in > /etc/ovirt-provider-ovn/conf.d/10-setup-ovirt-provider-ovn.conf > points to the correct file and ovirt-provider-ovn is restarted. > >> get tis issue; >> >> >> [root@engine ~]# tail -n 50 /var/log/ovirt-provider-ovn.log >> 2018-09-12 14:10:23,828 root [SSL: CERTIFICATE_VERIFY_FAILED] >> certificate verify failed (_ssl.c:579) Traceback (most recent call >> last): File "/usr/share/ovirt-provider-ovn/handlers/base_handler.py", >> line 133, in _handle_request method, path_parts, content >> File "/usr/share/ovirt-provider-ovn/handlers/selecting_handler.py", >> line 175, in handle_request return >> self.call_response_handler(handler, content, parameters) File >> "/usr/share/ovirt-provider-ovn/handlers/keystone.py", line 33, in >> call_response_handler return response_handler(content, parameters) >> File "/usr/share/ovirt-provider-ovn/handlers/keystone_responses.py", >> line 62, in post_tokens user_password=user_password) File >> "/usr/share/ovirt-provider-ovn/auth/plugin_facade.py", line 26, in >> create_token return auth.core.plugin.create_token(user_at_domain, >> user_password) File >> "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/plugin.py", line >> 48, in create_token timeout=self._timeout()) File >> "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/sso.py", line 75, >> in create_token username, password, engine_url, ca_file, timeout) >> File "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/sso.py", line >> 91, in _get_sso_token timeout=timeout File >> "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/sso.py", line 54, >> in wrapper response = func(*args, **kwargs) File >> "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/sso.py", line 47, >> in wrapper raise BadGateway(e) BadGateway: [SSL: >> CERTIFICATE_VERIFY_FAILED] certificate verify failed (_ssl.c:579) >> >> >> [root@engine ~]# tail -n 20 /var/log/ovirt-engine/engine.log >> 2018-09-12 14:10:23,773+03 INFO >> [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] >> (EE-ManagedThreadFactory-engineScheduled-Thread-47) [316db685] Lock >> Acquired to object >> 'EngineLock:{exclusiveLocks='[14e4fb72-9764-4757-b37d-4d487995571a=PROVIDER]', >> sharedLocks=''}' 2018-09-12 14:10:23,778+03 INFO >> [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] >> (EE-ManagedThreadFactory-engineScheduled-Thread-47) [316db685] >> Running command: SyncNetworkProviderCommand internal: true. >> 2018-09-12 14:10:23,836+03 ERROR >> [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] >> (EE-ManagedThreadFactory-engineScheduled-Thread-47) [316db685] >> Command >> 'org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand' >> failed: EngineException: (Failed with error Bad Gateway and code >> 5050) 2018-09-12 14:10:23,837+03 INFO >> [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] >> (EE-ManagedThreadFactory-engineScheduled-Thread-47) [316db685] Lock >> freed to object >> 'EngineLock:{exclusiveLocks='[14e4fb72-9764-4757-b37d-4d487995571a=PROVIDER]', >> sharedLocks=''}' 2018-09-12 14:14:12,477+03 INFO >> [org.ovirt.engine.core.sso.utils.AuthenticationUtils] (default >> task-6) [] User admin@internal successfully logged in with scopes: >> ovirt-app-admin ovirt-app-api ovirt-app-portal >> ovirt-ext=auth:sequence-priority=~ ovirt-ext=revoke:revoke-all >> ovirt-ext=token-info:authz-search >> ovirt-ext=token-info:public-authz-search >> ovirt-ext=token-info:validate ovirt-ext=token:password-access >> 2018-09-12 14:14:12,587+03 INFO >> [org.ovirt.engine.core.bll.aaa.CreateUserSessionCommand] (default >> task-6) [1bf1b763] Running command: CreateUserSessionCommand >> internal: false. 2018-09-12 14:14:12,628+03 INFO >> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] >> (default task-6) [1bf1b763] EVENT_ID: USER_VDC_LOGIN(30), User >> admin@internal-authz connecting from '10.0.3.61' using session >> 's8jAm7BUJGlicthm6yZBA3CUM8QpRdtwFaK3M/IppfhB3fHFB9gmNf0cAlbl1xIhcJ2WX+ww7e71Ri+MxJSsIg==' >> logged in. 2018-09-12 14:14:30,972+03 INFO >> [org.ovirt.engine.core.bll.provider.ImportProviderCertificateCommand] >> (default task-6) [ee3cc8a7-4485-4fdf-a0c2-e9d67b5cfcd3] Running >> command: ImportProviderCertificateCommand internal: false. Entities >> affected : ID: aaa00000-0000-0000-0000-123456789aaa Type: >> SystemAction group CREATE_STORAGE_POOL with role type ADMIN >> 2018-09-12 14:14:30,982+03 INFO >> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] >> (default task-6) [ee3cc8a7-4485-4fdf-a0c2-e9d67b5cfcd3] EVENT_ID: >> PROVIDER_CERTIFICATE_IMPORTED(213), Certificate for provider >> ovirt-provider-ovn was imported. (User: admin@internal-authz) >> 2018-09-12 14:14:31,006+03 INFO >> [org.ovirt.engine.core.bll.provider.TestProviderConnectivityCommand] >> (default task-6) [a48d94ab-b0b2-42a2-a667-0525b4c652ea] Running >> command: TestProviderConnectivityCommand internal: false. Entities >> affected : ID: aaa00000-0000-0000-0000-123456789aaa Type: >> SystemAction group CREATE_STORAGE_POOL with role type ADMIN >> 2018-09-12 14:14:31,058+03 ERROR >> [org.ovirt.engine.core.bll.provider.TestProviderConnectivityCommand] >> (default task-6) [a48d94ab-b0b2-42a2-a667-0525b4c652ea] Command >> 'org.ovirt.engine.core.bll.provider.TestProviderConnectivityCommand' >> failed: EngineException: (Failed with error Bad Gateway and code >> 5050) 2018-09-12 14:15:10,954+03 INFO >> [org.ovirt.engine.core.bll.utils.ThreadPoolMonitoringService] >> (EE-ManagedThreadFactory-engineThreadMonitoring-Thread-1) [] Thread >> pool 'default' is using 0 threads out of 1, 5 threads waiting for >> tasks. 2018-09-12 14:15:10,954+03 INFO >> [org.ovirt.engine.core.bll.utils.ThreadPoolMonitoringService] >> (EE-ManagedThreadFactory-engineThreadMonitoring-Thread-1) [] Thread >> pool 'engine' is using 0 threads out of 500, 16 threads waiting for >> tasks and 0 tasks in queue. 2018-09-12 14:15:10,954+03 INFO >> [org.ovirt.engine.core.bll.utils.ThreadPoolMonitoringService] >> (EE-ManagedThreadFactory-engineThreadMonitoring-Thread-1) [] Thread >> pool 'engineScheduled' is using 0 threads out of 100, 100 threads >> waiting for tasks. 2018-09-12 14:15:10,954+03 INFO >> [org.ovirt.engine.core.bll.utils.ThreadPoolMonitoringService] >> (EE-ManagedThreadFactory-engineThreadMonitoring-Thread-1) [] Thread >> pool 'engineThreadMonitoring' is using 1 threads out of 1, 0 threads >> waiting for tasks. 2018-09-12 14:15:10,954+03 INFO >> [org.ovirt.engine.core.bll.utils.ThreadPoolMonitoringService] >> (EE-ManagedThreadFactory-engineThreadMonitoring-Thread-1) [] Thread >> pool 'hostUpdatesChecker' is using 0 threads out of 5, 2 threads >> waiting for tasks. 2018-09-12 14:15:23,843+03 INFO >> [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] >> (EE-ManagedThreadFactory-engineScheduled-Thread-61) [2455041f] Lock >> Acquired to object >> 'EngineLock:{exclusiveLocks='[14e4fb72-9764-4757-b37d-4d487995571a=PROVIDER]', >> sharedLocks=''}' 2018-09-12 14:15:23,849+03 INFO >> [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] >> (EE-ManagedThreadFactory-engineScheduled-Thread-61) [2455041f] >> Running command: SyncNetworkProviderCommand internal: true. >> 2018-09-12 14:15:23,900+03 ERROR >> [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] >> (EE-ManagedThreadFactory-engineScheduled-Thread-61) [2455041f] >> Command >> 'org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand' >> failed: EngineException: (Failed with error Bad Gateway and code >> 5050) 2018-09-12 14:15:23,901+03 INFO >> [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] >> (EE-ManagedThreadFactory-engineScheduled-Thread-61) [2455041f] Lock >> freed to object >> 'EngineLock:{exclusiveLocks='[14e4fb72-9764-4757-b37d-4d487995571a=PROVIDER]', >> sharedLocks=''}' >> >> >> [root@engine ~]# >> cat /etc/ovirt-provider-ovn/conf.d/10-setup-ovirt-provider-ovn.conf # >> This file is automatically generated by engine-setup. Please do not >> edit manually [OVN REMOTE] ovn-remote=ssl:127.0.0.1:6641 >> [SSL] >> https-enabled=true >> ssl-cacert-file=/etc/pki/ovirt-engine/ca.pem >> ssl-cert-file=/etc/pki/ovirt-engine/certs/ovirt-provider-ovn.cer >> ssl-key-file=/etc/pki/ovirt-engine/keys/ovirt-provider-ovn.key.nopass >> [OVIRT] >> ovirt-sso-client-secret=Ms7Gw9qNT6IkXu7oA54tDmxaZDIukABV >> ovirt-host=https://engine.set.local:443 >> ovirt-sso-client-id=ovirt-provider-ovn >> ovirt-ca-file=/etc/pki/ovirt-engine/apache-ca.pem >> [PROVIDER] >> provider-host=engine.set.local >> >> >>> 12 сент. 2018 г., в 13:59, Dominik Holler <dholler(a)redhat.com> >>> написал(а): >>> >>> On Wed, 12 Sep 2018 13:04:53 +0300 >>> "Mail SET Inc. Group" <mail(a)set-pro.net> wrote: >>> >>>> Hello Dominik! >>>> I have a same issue with OVN provider and SSL >>>> https://www.mail-archive.com/users@ovirt.org/msg47020.html >>>> <https://www.mail-archive.com/users@ovirt.org/msg47020.html> But >>>> certificate changes not helps to resolve it. Maybe you can help me >>>> with this? >>> >>> Sure. Can you please share the relevant lines of >>> ovirt-provider-ovn.log and engine.log, and the information if you >>> are using the certificates generated by engine-setup with >>> users(a)ovirt.org ? Thanks, >>> Dominik >>> >> > >

5 13

Unable to enable HPET component of an specific VM in oVirt 4.7
by ricardoot＠gmail.com 24 Oct '23

24 Oct '23

Hello community members, I'm currently using oVirt 4.7 as my virtualization environment, and I'm facing an issue with enabling the HPET (High Precision Event Timer) component in the XML configuration file of virtual machine (VM). Upon inspecting the XML file, I noticed that the `<timer name='hpet' present='no'/>` line is missing, indicating that the HPET component is disabled. Here are the steps I have taken so far: 1. I verified that the VM's XML configuration file does not include the `<timer name='hpet' present='yes'/>` line. 2. While the VM was powered on, I used the following command to edit the XML configuration file: ``` virsh edit VM_NAME ``` I added the `<timer name='hpet' present='yes'/>` line to the XML file. However, the changes did not persist after restarting the VM. To provide additional information, on the host where oVirt is running, the available clock sources can be viewed by executing the following command: ``` cat /sys/devices/system/clocksource/clocksource0/available_clocksource ``` The output shows the available clock sources, such as `tsc`, `hpet`, and `acpi_pm`. To resolve the authentication issue with the `virsh` command, I created a user with appropriate privileges using the following command: ``` sudo saslpasswd2 -a libvirt USERNAME ``` After creating the user, I was able to authenticate successfully with the `virsh` command using the newly created credentials. However, I'm unable to find an option to add the HPET parameter in the web console of oVirt. It seems that the option to configure HPET is not available in the web console. Has anyone else encountered a similar issue in oVirt 4.7? Could you please provide guidance or suggest a solution to enable the HPET component in the XML configuration file of a powered-off VM in oVirt 4.7? Any insights, experiences, or suggestions would be greatly appreciated. Thank you in advance for your assistance! Best regards,

2 4

What is the status of the whole Ovirt Project?
by Arman Khalatyan 15 Oct '23

15 Oct '23

Hello everybody, What is the status of the ovirt project, would be continued it in the Rocky Linunx9? the last message is so sad: https://lists.ovirt.org/archives/list/users@ovirt.org/thread/HEKKBM6MZEKBEA… Any good news/progress there? As a happy ovirt user since 2016 should we move to an another system? Thank you beforehand, Arman.

9 14

How to obtain vm snapshots status
by anton.alymov＠cyberprotect.ru 04 Oct '23

04 Oct '23

Hi! I use ovirt rest api to start vm, backup vm and then remove vm. I start vm, wait for vmstatus up, then start backup, wait for starting, finalize, wait for succeeded, wait for disk unlock. Looks like backup is finished here from my side.Because ovirt repost succeed status and unlocks disk. But if i try shutdown and remove vm ovirt will throw error Cannot remove VM. The VM is performing an operation on a Snapshot. Please wait for the operation to finish, and try again. Ok, ovirt is right here, I see from web interface that operation hasn't finished yet. How can I obtain correct status where vm can be removed? I also tried to get info about vm snapshots but all of them had Status: ok

4 3