Storage Domain Not synchronized, To synchronize them, please move them to maintenance and then activate.
by Arup Jyoti Thakuria
Dear All,
In our Ovirt Engine Infrastructure, recently we have received an alert for one of our "Storage Domain"
The alert is as mentioned below----
===================================
Storage domains with IDs [fb34e5b7-e850-4d66-ab47-3011d2000338] could not be synchronized. To synchronize them, please move them to maintenance and then activate.
==========================================================
What is the consequence of this alert, if we ignore this what can happen to the infra, are we going to face any issue with the VMs, currently this infra is under production
1 week
oVirt networks
by Enrico Becchetti
Dear all,
Ineed your help to understand how to configure the network of a new
oVirt cluster.
Mynew system will have a 4.3 engine thatruns in a virtual machine, andsome
Dell R7525 AMD EPYC hypervisors, eachholding two 4-port PCI network cards.
These servers will have node-ovirt image again in version 4.3.
As for the network, there are two HPE Aruba 2540G, non-stackable, with
24 1Gbs ports
and 2 10Gbs uplinks to the star center.
This is a simplified scheme:
My goal is to make the most of the server's 8 ethernet interfaces to have
both reliability and maximum possible throughput.
This cluster will have two virtual networks, one forovirt management and
one for
the traffic of individual virtual machines.
With that said here's what my idea is. I would like to have two links
aggregated by 4Gbs,
one for ovrtmgt and the other for vmnet.
With the ovirt web interface I can createan active-passive "Mode 1"
bond, but this
won'tallow me to go beyond 1Gbs. Alternatively I could create a "Mode 4"
bond
802.3ad but unfortunately the switches are not stacked and therefore not
even
this solution applies.
This is an example with active passive configuration:
Can you tell me if ovirt can generate//nested bonds? Or do you have
other solutions ?
Thanks a lot !
Best Regards
Enrico
--
_______________________________________________________________________
Enrico Becchetti Servizio di Calcolo e Reti
Istituto Nazionale di Fisica Nucleare - Sezione di Perugia
Via Pascoli,c/o Dipartimento di Fisica 06123 Perugia (ITALY)
Phone:+39 075 5852777 Skype:enrico_becchetti
Mail: Enrico.Becchetti<at>pg.infn.it
Pagina web personale: https://www.pg.infn.it/home/enrico-becchetti/
______________________________________________________________________
2 weeks, 5 days
boot from cdrom & error code 0005
by edp＠maddalena.it
Hi.
I have created a new storage domain (data domain, storage type nfs) to use it to upload iso images.
I have so uploaded a new iso and then attach the iso to a new vm.
But when I try to boot the vm I obtain this error:
booting from dvd/cd...
boot failed: could not read from cdrom (code 0005)
no bootable device
The iso file has been uploaded with success in the data storage domain and so the vm lets my attach the iso to the vm in the boot settings.
Can you help me?
Thank you
3 weeks, 5 days
Importing VM from Vmware
by domenc＠gmail.com
Hi,
Migrating VMs from Vmware works nice in the UI but it's slow.
With https://blogs.oracle.com/scoter/post/how-to-migrate-vmware-vsphere-to-ora... i'm trying to import exported VM
virt-v2v \
–o rhv-upload \
–oc https://<OLVM-ENGINE-PORTAL>/ovirt-engine/api \
-op /root/olvm-admin-password-file \
-oo rhv-cacert=/root/ovirt-cacert.pem \
-oo rhv-cluster=<OLVM-CLUSTER> \
-os <OLVM_STORAGE_DOMAIN> \
-of qcow2 \
-oo rhv-direct \
--network <OLVM-NETWORK> \
-i libvirtxml <LOCAL-XML-FILE>
I tried everything possible but still there is an error
virt-v2v: error: no -oo (output options) are allowed here
If reporting bugs, run virt-v2v with debugging enabled and include the
complete output:
virt-v2v -v -x [...]
Any idea?
1 month, 3 weeks
Problem with Glusterfs Distributed-Replicated volume almost full but only less than 50% used by files.
by Olivier
Hi,
I have a weird problem with my couple Glusterfs-oVirt:
I had two data domain for my VMs on oVirt. The main one (data) is a Distributed-Replicate with 2 x 3 = 6 bricks of ~ 1,4 Tb on 3 servers (2 bricks by server).
It was an extend of a previous 1 x 3 = 3 Replicated volume on the same servers. I had one new disk (and one new brick) on each of these 3 servers.
My concern is the reported use of this volume (almost 100%).
a df -h give me :
df -h .
Filesystem Size Used Avail Use% Mounted on
ovirt1.pmmg.priv:/data 3.4T 3.3T 84G 98% /rhev/data-center/mnt/glusterSD/ovirt1.pmmg.priv:_data
but a du of the same partition give me :
du -hs /rhev/data-center/mnt/glusterSD/ovirt1.pmmg.priv:_data
1.4T /rhev/data-center/mnt/glusterSD/ovirt1.pmmg.priv:_data
and there no hidden folder I could miss in this mount point.
The weird point (the second one) is when I delete a VMs and is disks (main disk and snapshot) I doesn't get back some space on these volume.
Does anyone have an idea of these problem ?
Thank's
Here the Info of the gluster volume :
gluster volume info data
Volume Name: data
Type: Distributed-Replicate
Volume ID: 22b7942e-2952-40d4-ab92-64636e3ce409
Status: Started
Snapshot Count: 0
Number of Bricks: 2 x 3 = 6
Transport-type: tcp
Bricks:
Brick1: ovirt1.pmmg.priv:/gluster_bricks/data/data
Brick2: ovirt2.pmmg.priv:/gluster_bricks/data/data
Brick3: ovirt3.pmmg.priv:/gluster_bricks/data/data
Brick4: ovirt1.pmmg.priv:/gluster_bricks/data_extend1/data
Brick5: ovirt2.pmmg.priv:/gluster_bricks/data_extend1/data
Brick6: ovirt3.pmmg.priv:/gluster_bricks/data_extend1/data
Options Reconfigured:
features.shard-block-size: 128MB
cluster.lookup-optimize: off
server.keepalive-count: 5
server.keepalive-interval: 2
server.keepalive-time: 10
server.tcp-user-timeout: 20
performance.client-io-threads: on
nfs.disable: on
storage.fips-mode-rchecksum: on
transport.address-family: inet
performance.quick-read: off
performance.read-ahead: off
performance.io-cache: off
performance.low-prio-threads: 32
network.remote-dio: disable
cluster.eager-lock: enable
cluster.quorum-type: auto
cluster.server-quorum-type: server
cluster.data-self-heal-algorithm: full
cluster.locking-scheme: granular
cluster.shd-max-threads: 8
cluster.shd-wait-qlength: 10000
features.shard: on
user.cifs: off
cluster.choose-local: off
client.event-threads: 4
server.event-threads: 4
storage.owner-uid: 36
storage.owner-gid: 36
network.ping-timeout: 20
performance.strict-o-direct: on
cluster.granular-entry-heal: enable
features.trash: off
1 month, 3 weeks
Start VM with option -machine smm=off
by Kalil de A. Carvalho
Hello all.
I'm trying to workaround the problem reported here:
https://gitlab.com/qemu-project/qemu/-/issues/1198
but I did not find out how to start up the VM with the option -machine
smm=off like sead on the lsit above.
I guess that it is possible to run the command using the qemu command but I
think that I will lose the management of it.
It is possible to startup up a VM with this option using the oVirt GUI ou
virsh?
Best regards
--
Atenciosamente,
Kalil de A. Carvalho
2 months
New oVirt release ???
by Diggy
Any movement towards a new oVirt release now that CentOS Stream 8 is
officially at EOL and the current engine is based on it?
Do I see oVirt v4.6 in my near future? I'm looking for a reason to
build a fresh oVirt environment and migrate our 100+ VMs to it. :)
---
2 months
engine-setup fails: "Failed to execute stage 'Misc configuration': Command '/usr/bin/ovirt-aaa-jdbc-tool' failed to execute"
by brent.saner＠netfire.com
I can find no reason why this would be happening. AlmaLinux 9.4, oVirt 4.5.6, brand new/fresh cluster/install.
From the log, these seem to be the only relevant lines:
2024-06-18 22:02:52,720+0000 DEBUG otopi.plugins.ovirt_engine_setup.ovirt_engine.config.aaajdbc plugin.execute:918 execute-output: ('/usr/bin/ovirt-aaa-jdbc-tool', '--db-config=/etc/ovirt-engine/aaa/internal.properties', 'query', '--what=
user', '--pattern=name=admin') stdout:
2024-06-18 22:02:52,720+0000 DEBUG otopi.plugins.ovirt_engine_setup.ovirt_engine.config.aaajdbc plugin.execute:923 execute-output: ('/usr/bin/ovirt-aaa-jdbc-tool', '--db-config=/etc/ovirt-engine/aaa/internal.properties', 'query', '--what=
user', '--pattern=name=admin') stderr:
Picked up JAVA_TOOL_OPTIONS: -Dcom.redhat.fips=false
Jun 18, 2024 10:02:52 PM org.ovirt.engine.extension.aaa.jdbc.binding.cli.Cli main
SEVERE: Unexpected Exception invoking Cli: com/ongres/scram/common/stringprep/StringPreparation
2024-06-18 22:02:52,720+0000 DEBUG otopi.context context._executeMethod:143 method exception
Traceback (most recent call last):
File "/usr/lib/python3.9/site-packages/otopi/context.py", line 132, in _executeMethod
method['method']()
File "/usr/share/ovirt-engine/setup/bin/../plugins/ovirt-engine-setup/ovirt-engine/config/aaajdbc.py", line 414, in _misc
self._setupAdminUser()
File "/usr/share/ovirt-engine/setup/bin/../plugins/ovirt-engine-setup/ovirt-engine/config/aaajdbc.py", line 298, in _setupAdminUser
if not self._userExists(
File "/usr/share/ovirt-engine/setup/bin/../plugins/ovirt-engine-setup/ovirt-engine/config/aaajdbc.py", line 49, in _userExists
rc, stdout, stderr = self.execute(
File "/usr/lib/python3.9/site-packages/otopi/plugin.py", line 929, in execute
raise RuntimeError(
RuntimeError: Command '/usr/bin/ovirt-aaa-jdbc-tool' failed to execute
2024-06-18 22:02:52,721+0000 ERROR otopi.context context._executeMethod:151 Failed to execute stage 'Misc configuration': Command '/usr/bin/ovirt-aaa-jdbc-tool' failed to execute
2024-06-18 22:02:52,721+0000 DEBUG otopi.transaction transaction.abort:124 aborting 'DNF Transaction'
Any ideas?
2 months
