July 2024 - Users - Ovirt List Archives

Error when deploy Ovirt4.4 Hosted Engine

by staybox＠gmail.com

Hello, I get error, need help. [ ERROR ] fatal: [localhost]: FAILED! => {"msg": "The conditional check 'not ipv6_deployment|bool and route_rules_ipv4.stdout | from_json | selectattr('priority', 'equalto', 100) | selectattr('dst', 'equalto', virbr_cidr_ipv4 | ipaddr('address') ) | list | length == 0' failed. The error was: error while evaluating conditional (not ipv6_deployment|bool and route_rules_ipv4.stdout | from_json | selectattr('priority', 'equalto', 100) | selectattr('dst', 'equalto',… [View More]

4 months, 2 weeks

4
4
0 / 0

How to list all snapshots?

by jorgevisentini＠gmail.com

Hello everyone! First, I would like to thank everyone involved in this wonderful project. I leave here my sincere thanks! Does anyone know if it is possible to list all snapshots automatically? It can be by ansible, python, shell... any way that helps to list them all without having to enter Domain by Domain. Thank you all!

4 months, 3 weeks

4
3
0 / 0

snapshot solution: Existing snapshots that were taken after this one will be erased.

by dhanaraj.ramesh＠yahoo.com

Hi Team, when I want to commit the older snapshots I'm getting warning stating " Existing snapshots that were taken after this one will be erased.". is there any way we can retain the latest snapshots as is in the chain? I knew cloning and template export options are there to secure that latest snapshot data but these are will consume additional space in storage and take time.

5 months, 1 week

4
3
0 / 0

Restart oVirt-Engine

by Jeremey Wise

How ,without reboot of hosting system, do I restart the oVirt engine? # I tried below but do not seem to effect the virtual machine [root@thor iso]# systemctl restart ov ovirt-ha-agent.service ovirt-imageio.service ovn-controller.service ovs-delete-transient-ports.service ovirt-ha-broker.service ovirt-vmconsole-host-sshd.service ovsdb-server.service ovs-vswitchd.service [root@thor iso]# # You cannot restart the VM " HostedEngine " as it … [View More]

5 months, 4 weeks

4
4
0 / 0

Host deploy failure: Configure OVN for oVirt

by stephan.badenhorst＠fnb.co.za

Good day, I am running into a problem during host deploy via the oVirt engine GUI since upgrading to ovirt-engine-4.5.5-1.el8. The "Configure OVN for oVirt" task seem to fail when trying to run the vdsm-tool ovn-config command. Host deploy used to work fine when the engine was on version 4.5.4. Anyone that can guide me on the right path to get past this issue? Does not seem to be a new problem - https://lists.ovirt.org/archives/list/users@ovirt.org/thread/IDLGSBQFX35E... Log extract: … [View More]2024-02-01 14:48:19 SAST - TASK [ovirt-provider-ovn-driver : Configure OVN for oVirt] ********************* . . . "stdout" : "fatal: [mob-r1-l-ovirt-aa-1-23.x.fnb.co.za]: FAILED! => {\"changed\": true, \"cmd\": [\"vdsm-tool\", \"ovn-config\", \"192.168.2.100\", \"host23.mydomain.com\"], \"delta\": \"0:00:00.538143\", \"end \": \"2024-02-01 14:48:20.596823\", \"msg\": \"non-zero return code\", \"rc\": 1, \"start\": \"2024-02-01 14:48:20.058680\", \"stderr\": \"Traceback (most recent call last):\\n File \\\"/usr/lib/python3.6/site-packages/vdsm/t ool/ovn_config.py\\\", line 117, in get_network\\n return networks[net_name]\\nKeyError: 'host23.mydomain.com'\\n\\nDuring handling of the above exception, another exception occurred:\\n\\nTraceback (most rec ent call last):\\n File \\\"/usr/bin/vdsm-tool\\\", line 195, in main\\n return tool_command[cmd][\\\"command\\\"](*args)\\n File \\\"/usr/lib/python3.6/site-packages/vdsm/tool/ovn_config.py\\\", line 63, in ovn_config\\n ip_address = get_ip_addr(get_network(network_caps(), net_name))\\n File \\\"/usr/lib/python3.6/site-packages/vdsm/tool/ovn_config.py\\\", line 119, in get_network\\n raise NetworkNotFoundError(net_name)\\nvdsm.tool.ovn _config.NetworkNotFoundError: host23.mydomain.com\", \"stderr_lines\": [\"Traceback (most recent call last):\", \" File \\\"/usr/lib/python3.6/site-packages/vdsm/tool/ovn_config.py\\\", line 117, in get_network \", \" return networks[net_name]\", \"KeyError: 'host23.mydomain.com'\", \"\", \"During handling of the above exception, another exception occurred:\", \"\", \"Traceback (most recent call last):\", \" File \ \\"/usr/bin/vdsm-tool\\\", line 195, in main\", \" return tool_command[cmd][\\\"command\\\"](*args)\", \" File \\\"/usr/lib/python3.6/site-packages/vdsm/tool/ovn_config.py\\\", line 63, in ovn_config\", \" ip_address = get_ip_addr(get_network(network_caps(), net_name))\", \" File \\\"/usr/lib/python3.6/site-packages/vdsm/tool/ovn_config.py\\\", line 119, in get_network\", \" raise NetworkNotFoundError(net_name)\", \"vdsm.tool.ovn_config. NetworkNotFoundError: host23.mydomain.com\"], \"stdout\": \"\", \"stdout_lines\": []}", Thanks in advance!! Stephan [View Less]

6 months

5
5
0 / 0

Unable to access ovirt Admin Screen from ovirt Host

by louisb＠ameritech.net

I've reinstalled ovirt 4.4 on my server remotely via cockpit terminal. I'm able to access the ovirt admin screen remotely from the laptop that I used for the install. However, using the same URL I'm unable to gain access to the admin screen. Following the instruction in the documentation I've modified the file: /etc/ovirt-engine/engine.conf.d/99-custom-sso-setup.conf, to reflect the DNS name and I enter in the IP address. But I'm still unable to access the screen from the server console. … [View More]

7 months

5
8
0 / 0

SPM and Task error ...

by Enrico

Hi all, my ovirt cluster has got 3 Hypervisors runnig Centos 7.5.1804 vdsm is 4.20.39.1-1.el7, ovirt engine is 4.2.4.5-1.el7, the storage systems are HP MSA P2000 and 2050 (fibre channel). I need to stop one of the hypervisors for maintenance but this system is the storage pool manager. For this reason I decided to manually activate SPM in one of the other nodes but this operation is not successful. In the ovirt engine (engine.log) the error is this: 2019-07-25 12:39:16,744+02 … [View More]INFO [org.ovirt.engine.core.bll.storage.pool.ForceSelectSPMCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] Running command: ForceSelectSPMCommand internal: false. Entities affected : ID: 81c9bd3c-ae0a-467f-bf7f-63ab30cd8d9e Type: VDSAction group MANIPULATE_HOST with role type ADMIN 2019-07-25 12:39:16,745+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SpmStopOnIrsVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] START, SpmStopOnIrsVDSCommand( SpmStopOnIrsVDSCommandParameters:{storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7', ignoreFailoverLimit='false'}), log id: 37bf4639 2019-07-25 12:39:16,747+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.ResetIrsVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] START, ResetIrsVDSCommand( ResetIrsVDSCommandParameters:{storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7', ignoreFailoverLimit='false', vdsId='751f3e99-b95e-4c31-bc38-77f5661a0bdc', ignoreStopFailed='false'}), log id: 2522686f 2019-07-25 12:39:16,749+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.SpmStopVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] START, SpmStopVDSCommand(HostName = infn-vm05.management, SpmStopVDSCommandParameters:{hostId='751f3e99-b95e-4c31-bc38-77f5661a0bdc', storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7'}), log id: 1810fd8b 2019-07-25 12:39:16,758+02 *ERROR* [org.ovirt.engine.core.vdsbroker.vdsbroker.SpmStopVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] SpmStopVDSCommand::Not stopping SPM on vds 'infn-vm05.management', pool id '18d57688-6ed4-43b8-bd7c-0665b55950b7' as there are uncleared tasks 'Task 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e', status 'running'' 2019-07-25 12:39:16,758+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.SpmStopVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] FINISH, SpmStopVDSCommand, log id: 1810fd8b 2019-07-25 12:39:16,758+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.ResetIrsVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] FINISH, ResetIrsVDSCommand, log id: 2522686f 2019-07-25 12:39:16,758+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SpmStopOnIrsVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] FINISH, SpmStopOnIrsVDSCommand, log id: 37bf4639 2019-07-25 12:39:16,760+02 *ERROR* [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] EVENT_ID: USER_FORCE_SELECTED_SPM_STOP_FAILED(4,096), Failed to force select infn-vm07.management as the SPM due to a failure to stop the current SPM. while in the hypervisor (SPM) vdsm.log: 2019-07-25 12:39:16,744+02 INFO [org.ovirt.engine.core.bll.storage.pool.ForceSelectSPMCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] Running command: ForceSelectSPMCommand internal: false. Entities affected : ID: 81c9bd3c-ae0a-467f-bf7f-63ab30cd8d9e Type: VDSAction group MANIPULATE_HOST with role type ADMIN 2019-07-25 12:39:16,745+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SpmStopOnIrsVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] START, SpmStopOnIrsVDSCommand( SpmStopOnIrsVDSCommandParameters:{storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7', ignoreFailoverLimit='false'}), log id: 37bf4639 2019-07-25 12:39:16,747+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.ResetIrsVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] START, ResetIrsVDSCommand( ResetIrsVDSCommandParameters:{storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7', ignoreFailoverLimit='false', vdsId='751f3e99-b95e-4c31-bc38-77f5661a0bdc', ignoreStopFailed='false'}), log id: 2522686f 2019-07-25 12:39:16,749+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.SpmStopVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] START, SpmStopVDSCommand(HostName = infn-vm05.management, SpmStopVDSCommandParameters:{hostId='751f3e99-b95e-4c31-bc38-77f5661a0bdc', storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7'}), log id: 1810fd8b 2019-07-25 12:39:16,758+02 *ERROR* [org.ovirt.engine.core.vdsbroker.vdsbroker.SpmStopVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] SpmStopVDSCommand::Not stopping SPM on vds 'infn-vm05.management', pool id '18d57688-6ed4-43b8-bd7c-0665b55950b7' as there are uncleared tasks 'Task 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e', status 'running'' 2019-07-25 12:39:16,758+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.SpmStopVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] FINISH, SpmStopVDSCommand, log id: 1810fd8b 2019-07-25 12:39:16,758+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.ResetIrsVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] FINISH, ResetIrsVDSCommand, log id: 2522686f 2019-07-25 12:39:16,758+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SpmStopOnIrsVDSCommand] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] FINISH, SpmStopOnIrsVDSCommand, log id: 37bf4639 2019-07-25 12:39:16,760+02 *ERROR* [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-30) [7c374384-f884-4dc9-87d0-7af27dce706b] EVENT_ID: USER_FORCE_SELECTED_SPM_STOP_FAILED(4,096), Failed to force select infn-vm07.management as the SPM due to a failure to stop the current SPM. 2019-07-25 12:39:18,660+02 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] Task id 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' has passed pre-polling period time and should be polled. Pre-polling period is 60000 millis. 2019-07-25 12:39:18,660+02 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] Task id 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' has passed pre-polling period time and should be polled. Pre-polling period is 60000 millis. 2019-07-25 12:39:18,750+02 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] Task id 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' has passed pre-polling period time and should be polled. Pre-polling period is 60000 millis. 2019-07-25 12:39:18,750+02 *ERROR* [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] BaseAsyncTask::logEndTaskFailure: Task 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' (Parent Command 'Unknown', Parameters Type 'org.ovirt.engine.core.common.asynctasks.AsyncTaskParameters') ended with failure: 2019-07-25 12:39:18,750+02 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] SPMAsyncTask::ClearAsyncTask: Attempting to clear task 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' 2019-07-25 12:39:18,751+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SPMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] START, SPMClearTaskVDSCommand( SPMTaskGuidBaseVDSCommandParameters:{storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7', ignoreFailoverLimit='false', taskId='fdcf4d1b-82fe-49a6-b233-323ebe568f8e'}), log id: 34ae2b2f 2019-07-25 12:39:18,752+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] START, HSMClearTaskVDSCommand(HostName = infn-vm05.management, HSMTaskGuidBaseVDSCommandParameters:{hostId='751f3e99-b95e-4c31-bc38-77f5661a0bdc', taskId='fdcf4d1b-82fe-49a6-b233-323ebe568f8e'}), log id: d3a78ad 2019-07-25 12:39:18,757+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] FINISH, HSMClearTaskVDSCommand, log id: d3a78ad 2019-07-25 12:39:18,757+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SPMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] FINISH, SPMClearTaskVDSCommand, log id: 34ae2b2f 2019-07-25 12:39:18,757+02 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] SPMAsyncTask::ClearAsyncTask: At time of attempt to clear task 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' the response code was 'TaskStateError' and message was 'Operation is not allowed in this task state: ("can't clean in state running",)'. Task will not be cleaned 2019-07-25 12:39:18,757+02 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] BaseAsyncTask::onTaskEndSuccess: Task 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' (Parent Command 'Unknown', Parameters Type 'org.ovirt.engine.core.common.asynctasks.AsyncTaskParameters') ended successfully. 2019-07-25 12:39:18,757+02 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] SPMAsyncTask::ClearAsyncTask: Attempting to clear task 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' 2019-07-25 12:39:18,758+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SPMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] START, SPMClearTaskVDSCommand( SPMTaskGuidBaseVDSCommandParameters:{storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7', ignoreFailoverLimit='false', taskId='fdcf4d1b-82fe-49a6-b233-323ebe568f8e'}), log id: 42de0c2b 2019-07-25 12:39:18,759+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] START, HSMClearTaskVDSCommand(HostName = infn-vm05.management, HSMTaskGuidBaseVDSCommandParameters:{hostId='751f3e99-b95e-4c31-bc38-77f5661a0bdc', taskId='fdcf4d1b-82fe-49a6-b233-323ebe568f8e'}), log id: 4895c79c 2019-07-25 12:39:18,764+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] FINISH, HSMClearTaskVDSCommand, log id: 4895c79c 2019-07-25 12:39:18,764+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SPMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] FINISH, SPMClearTaskVDSCommand, log id: 42de0c2b 2019-07-25 12:39:18,764+02 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] SPMAsyncTask::ClearAsyncTask: At time of attempt to clear task 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' the response code was 'TaskStateError' and message was 'Operation is not allowed in this task state: ("can't clean in state running",)'. Task will not be cleaned 2019-07-25 12:39:18,764+02 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] Task id 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' has passed pre-polling period time and should be polled. Pre-polling period is 60000 millis. 2019-07-25 12:39:18,764+02 INFO [org.ovirt.engine.core.bll.tasks.AsyncTaskManager] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] Cleaning zombie tasks: Clearing async task 'Unknown' that started at 'Fri May 03 14:48:50 CEST 2019' 2019-07-25 12:39:18,764+02 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] SPMAsyncTask::ClearAsyncTask: Attempting to clear task 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' 2019-07-25 12:39:18,765+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SPMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] START, SPMClearTaskVDSCommand( SPMTaskGuidBaseVDSCommandParameters:{storagePoolId='18d57688-6ed4-43b8-bd7c-0665b55950b7', ignoreFailoverLimit='false', taskId='fdcf4d1b-82fe-49a6-b233-323ebe568f8e'}), log id: da77af2 2019-07-25 12:39:18,766+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] START, HSMClearTaskVDSCommand(HostName = infn-vm05.management, HSMTaskGuidBaseVDSCommandParameters:{hostId='751f3e99-b95e-4c31-bc38-77f5661a0bdc', taskId='fdcf4d1b-82fe-49a6-b233-323ebe568f8e'}), log id: 530694fb 2019-07-25 12:39:18,771+02 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] FINISH, HSMClearTaskVDSCommand, log id: 530694fb 2019-07-25 12:39:18,771+02 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.SPMClearTaskVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] FINISH, SPMClearTaskVDSCommand, log id: da77af2 2019-07-25 12:39:18,771+02 INFO [org.ovirt.engine.core.bll.tasks.SPMAsyncTask] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] SPMAsyncTask::ClearAsyncTask: At time of attempt to clear task 'fdcf4d1b-82fe-49a6-b233-323ebe568f8e' the response code was 'TaskStateError' and message was 'Operation is not allowed in this task state: ("can't clean in state running",)'. Task will not be cleaned there is some relation between this error and a task that has remained hanging, from SPM server: # vdsm-client Task getInfo taskID=fdcf4d1b-82fe-49a6-b233-323ebe568f8e { "verb": "prepareMerge", "id": "fdcf4d1b-82fe-49a6-b233-323ebe568f8e" } # vdsm-client Task getStatus taskID=fdcf4d1b-82fe-49a6-b233-323ebe568f8e { "message": "running job 1 of 1", "code": 0, "taskID": "fdcf4d1b-82fe-49a6-b233-323ebe568f8e", "taskResult": "", "taskState": "running" } How can I solve this problem ? Thanks a lot for your help !! Best Regards Enrico -- _______________________________________________________________________ Enrico Becchetti Servizio di Calcolo e Reti Istituto Nazionale di Fisica Nucleare - Sezione di Perugia Via Pascoli,c/o Dipartimento di Fisica 06123 Perugia (ITALY) Phone:+39 075 5852777 Mail: Enrico.Becchetti<at>pg.infn.it _______________________________________________________________________ [View Less]

7 months, 2 weeks

5
15
0 / 0

oVirt CLI tool for automation tasks

by munnadawood＠gmail.com

We recently migrated from VMware to oVirt. I am looking for any CLI tool well suited for my automation tasks like VM create, clone, migrate 100s of Virtual machines in oVirt cluster. with VMware I was using govc (vSphere CLI built on top of govmomi). Another option I read is powercli, quite unsure if it works with oVirt. Any suggestions would be highly appreciated. Thanks!

7 months, 3 weeks

5
6
1 / 0

Latest 4.5.5 centos node install username password not working.

by antonio.riggio＠mail.com

I been trying to install 4.5.5 testing and used the node installer iso. I cant login what is the username and password I have tried what others have done in the forums with no luck admin@ovirt . root admin . Also can the engine be installed from the node via the cockpit still? How can I get logged in to do this? I have used 4.3 and didnt have any of these problems. It was really simple to do. Any suggestions? grazie

8 months, 2 weeks

4
8
0 / 0

Storage Domain Not synchronized, To synchronize them, please move them to maintenance and then activate.

by Arup Jyoti Thakuria

Dear All, In our Ovirt Engine Infrastructure, recently we have received an alert for one of our "Storage Domain" The alert is as mentioned below---- =================================== Storage domains with IDs [fb34e5b7-e850-4d66-ab47-3011d2000338] could not be synchronized. To synchronize them, please move them to maintenance and then activate. ========================================================== What is the consequence of this alert, if we ignore this what can happen to the infra, … [View More]

10 months

2
1
0 / 0

cpu pinning validation failed - virtual cpu does not exist in vm

by parallax

server with two Gold 6346 this message appears when trying pin any cores after 14 core: 16#16_17#17_18#18_19#19_20#20_21#21_22#22 "cpu pinning validation failed - virtual cpu does not exist in vm" "Count Threads As Cores" is disabled pinning cores from 9 to 15 goes well 0#0_1#1_2#2_3#3_4#4_5#5_6#6_7#7_8#8_9#9_10#10_11#11

10 months

2
1
0 / 0

console certificate is not trusted

by suporte＠logicworks.pt

Hi, I just install last ovirt version ( Version 4.5.6-1.el9) using CentOS Stream 9. When trying to access the console get this error message: The certificate is not trusted. I'm using self signed certificate. Any idea? Thanks -- Jose Ferradeira http://www.logicworks.pt

10 months

5
5
0 / 0

Váltás a Centos Stream 9-re.

by tasnadi.peter＠kifu.gov.hu

Hello! We have a oVirt 4.5.6-1.el8 cluster. oVirt node Centos Stream 8 based. (5pcs) oVirt Hosted Engine Centos stream 8 based. We installed the hosts from an ISO image and the Hosted Engine we deployed from such a host. Link: https://resources.ovirt.org/pub/ovirt-4.5/iso/ovirt-node-ng-installer/4.5... How can we switch to Centos Stream 9 OS in the simplest way without downtime? Thanks in advance for the answer! Peter

10 months

2
1
0 / 0

oVirt networks

by Enrico Becchetti

Dear all, Ineed your help to understand how to configure the network of a new oVirt cluster. Mynew system will have a 4.3 engine thatruns in a virtual machine, andsome Dell R7525 AMD EPYC hypervisors, eachholding two 4-port PCI network cards. These servers will have node-ovirt image again in version 4.3. As for the network, there are two HPE Aruba 2540G, non-stackable, with 24 1Gbs ports and 2 10Gbs uplinks to the star center. This is a simplified scheme: My goal is to make the … [View More]

10 months, 1 week

5
6
0 / 0

boot from cdrom & error code 0005

by edp＠maddalena.it

Hi. I have created a new storage domain (data domain, storage type nfs) to use it to upload iso images. I have so uploaded a new iso and then attach the iso to a new vm. But when I try to boot the vm I obtain this error: booting from dvd/cd... boot failed: could not read from cdrom (code 0005) no bootable device The iso file has been uploaded with success in the data storage domain and so the vm lets my attach the iso to the vm in the boot settings. Can you help me? Thank you

10 months, 2 weeks

4
6
0 / 0

VM start order

by Sergei Panchenko

Good morning! Is there any way to configure VM start order? For example, I would like to make it so VM3 starts only after VM2 starts and VM2 starts only after VM1 starts. I know about run/migrate priority, but it is the other scenario.

10 months, 4 weeks

3
6
1 / 0

Unable to add logical interface

by Jeremy Tourville

List: I have a single host that was added to my cluster and operational. My management engine is running in a separate, dedicated pc. When making some network changes and testing them, I made the mistake of removing the virtual interface using nmtui on the host. Now when I try to add the logical network to the host again, I get an error message: "Operation cancelled Error while executing action: Cannot setup Networks. Operation can be performed only when Host status is Maintenance, Up, Non-… [View More]

11 months, 1 week

1
0
0 / 0

Recommendation for iSCSI configuration

by De Lee

Hi, I'm currently running the platform with following version and facing the issue with iSCSI timeout issue during the network switch maintenance. oVirt Version 4.5 oVirt manager : Redhat 9.0 oVirt node : Rocky 9.4 Here's a drawing of the topology: +---------------+ | Storage | +---------------+ 192.168.11.2 | | 192.168.11.1 | | 10GbE Links | | +-… [View More]

11 months, 1 week

3
2
0 / 0

Why all environment fall if one storage domain going down?

by Kalil de A. Carvalho

Hello all. Can any one tell me why all environment fall if we lost one domain storage? In my company we have many NFS storages and if just one going down, been rebooted, all host fail. What we realized, I do not know if it is true, is if one host can´t communicate with the storage it will be rebooted or if the use of memory is too high it will be rebooted too. Are those two impressions real? Best regards -- Atenciosamente, Kalil de A. Carvalho

11 months, 1 week

2
1
0 / 0

Re: Certificate verification error for qemu while migrating

by Julien Deberles

Hello, Does anyone have a procedure to fix the error or workaround for me ? Kind regards, Julien

11 months, 1 week

1
0
0 / 0

Re: Problem with OVF and Bad Volume Specification

by Matthew.Stier＠fujitsu.com

I could mount the storage domain on 4.4, but the VM and Template imports were blank. From: Nur Imam Febrianto <nur_imam(a)outlook.com> Sent: Thursday, July 25, 2024 12:55 PM To: Stier, Matthew <Matthew.Stier(a)fujitsu.com>; oVirt Users <users(a)ovirt.org> Subject: Re: Problem with OVF and Bad Volume Specification Thanks for the info. But as i said before, i'm moving between same 4.5 DC. Not different one. And the storage domain can be attached and mounted easily in the … [View More]target datacenter, but the problem is the vm wont shows up in VM Import tabs. Seems the OVF_STORE are broken or cant be read by the target DC. Any idea how to rebuild the OVF_STORE ? or maybe any steps that must be taken before detaching SD from source DC ? Get Outlook for Android<https://aka.ms/AAb9ysg> ________________________________ From: Matthew.Stier(a)fujitsu.com<mailto:Matthew.Stier@fujitsu.com> <Matthew.Stier(a)fujitsu.com<mailto:Matthew.Stier@fujitsu.com>> Sent: Thursday, July 25, 2024 11:41:28 PM To: Nur Imam Febrianto <nur_imam(a)outlook.com<mailto:nur_imam@outlook.com>>; oVirt Users <users(a)ovirt.org<mailto:users@ovirt.org>> Subject: RE: Problem with OVF and Bad Volume Specification Your experience is the same I had when attempting to move storage domains between 4.3 and 4.4 datacenters, because the data 4.4 could not read the 4.3 fomatted storage domains, and the 4.4 datacenter altered the storage domain enough, that I could not remount it on a 4.3 data center. Using 'export' storage domains, worked around this problem. Also, since export only copies the disks to the export storage domain, you can always delete them from the destination, and restart them on the source. Of course, this also means that you need to delete them from the source, once you are satisfied with their operation on the destination. From: Nur Imam Febrianto <nur_imam(a)outlook.com<mailto:nur_imam@outlook.com>> Sent: Wednesday, July 24, 2024 10:38 PM To: Stier, Matthew <Matthew.Stier(a)fujitsu.com<mailto:Matthew.Stier@fujitsu.com>>; oVirt Users <users(a)ovirt.org<mailto:users@ovirt.org>> Subject: Re: Problem with OVF and Bad Volume Specification Correct. I'm migrating between datacenter that have a different hosted engine. Also using same version (source is oVirt 4.5 on el8, destionation is oVirt 4.5 on el9 and OLVM 4.5 on OL8). Why i need to add export domain ? The migration approach that i took is detaching storage domain from source cluster and then attaching it to the new cluster, not doing OVA Export from source and importing it in new cluster. I already read somewhere in the docs, it should be fine taking this approach as long the Storage Domain version and oVirt version are same. ________________________________ From: Matthew.Stier(a)fujitsu.com<mailto:Matthew.Stier@fujitsu.com> <Matthew.Stier(a)fujitsu.com<mailto:Matthew.Stier@fujitsu.com>> Sent: Thursday, 25 July 2024 05:06 To: Nur Imam Febrianto <nur_imam(a)outlook.com<mailto:nur_imam@outlook.com>>; oVirt Users <users(a)ovirt.org<mailto:users@ovirt.org>> Subject: RE: Problem with OVF and Bad Volume Specification Are you migrating data "storage domains" between data centers? This can only be accomplished between data centers of the same version (4.3, 4.4, 4.5) since the disk schema changes a bit between them. To move VM's between you will need to add a storage domain as an "export" domain. Export storage domains are of a format that is accepted by all versions. My data storage domains are either iSCSI or FC (depending upon how it is attached) but I use NFS for export storage domains. Attach it to the volume as an export domain. Got to Compute > Virtual machines > Elipses (three dots in upper right corner), and select "Export to Export Domain" Once copied to the export domain, you can detach it, and move it on the destination. Once the export domain is attached, you can import the "VMs" which will copy them to a data domain on the destination. When detaching the export domain, I recommend deleting the contents, so you have a clean slate for the next more. You will also need to remove the VMs from the source, since they are not automatically deleted. (safety measure) From: Nur Imam Febrianto <nur_imam(a)outlook.com<mailto:nur_imam@outlook.com>> Sent: Tuesday, July 23, 2024 10:06 PM To: oVirt Users <users(a)ovirt.org<mailto:users@ovirt.org>> Subject: [ovirt-users] Problem with OVF and Bad Volume Specification Hi, Recently we are migrating our existing VM from Existing oVirt cluster, to new oVirt cluster (using el9) and Oracle OLVM. But we have this strange issue, after detaching storage domain, and then attaching the storage domain in new cluster, VM Impor tdoesnt shows up any vm that are located on this storage domain. In Disk Import, it shows a lot of disk with no aliases at all, and after we do trial and error with our disk, several disk are missing at all, no trace and no whereabout. After further investigation, OVF_STORE only contains 2 VM definition, not all the VM, and it guts truncated whenever we try to extract it using TAR. Update OVF doesnt help at all too. Anybody got any idea how to prevent or solve this ? We still have 3 storage domain and afraid the same thing will happened again. Thanks before. [View Less]

11 months, 2 weeks

1
0
0 / 0

Re: Problem with OVF and Bad Volume Specification

by Nur Imam Febrianto

Thanks for the info. But as i said before, i'm moving between same 4.5 DC. Not different one. And the storage domain can be attached and mounted easily in the target datacenter, but the problem is the vm wont shows up in VM Import tabs. Seems the OVF_STORE are broken or cant be read by the target DC. Any idea how to rebuild the OVF_STORE ? or maybe any steps that must be taken before detaching SD from source DC ? Get Outlook for Android<https://aka.ms/AAb9ysg> … [View More]________________________________ From: Matthew.Stier(a)fujitsu.com <Matthew.Stier(a)fujitsu.com> Sent: Thursday, July 25, 2024 11:41:28 PM To: Nur Imam Febrianto <nur_imam(a)outlook.com>; oVirt Users <users(a)ovirt.org> Subject: RE: Problem with OVF and Bad Volume Specification Your experience is the same I had when attempting to move storage domains between 4.3 and 4.4 datacenters, because the data 4.4 could not read the 4.3 fomatted storage domains, and the 4.4 datacenter altered the storage domain enough, that I could not remount it on a 4.3 data center. Using ‘export’ storage domains, worked around this problem. Also, since export only copies the disks to the export storage domain, you can always delete them from the destination, and restart them on the source. Of course, this also means that you need to delete them from the source, once you are satisfied with their operation on the destination. From: Nur Imam Febrianto <nur_imam(a)outlook.com> Sent: Wednesday, July 24, 2024 10:38 PM To: Stier, Matthew <Matthew.Stier(a)fujitsu.com>; oVirt Users <users(a)ovirt.org> Subject: Re: Problem with OVF and Bad Volume Specification Correct. I'm migrating between datacenter that have a different hosted engine. Also using same version (source is oVirt 4.5 on el8, destionation is oVirt 4.5 on el9 and OLVM 4.5 on OL8). Why i need to add export domain ? The migration approach that i took is detaching storage domain from source cluster and then attaching it to the new cluster, not doing OVA Export from source and importing it in new cluster. I already read somewhere in the docs, it should be fine taking this approach as long the Storage Domain version and oVirt version are same. ________________________________ From: Matthew.Stier(a)fujitsu.com<mailto:Matthew.Stier@fujitsu.com> <Matthew.Stier(a)fujitsu.com<mailto:Matthew.Stier@fujitsu.com>> Sent: Thursday, 25 July 2024 05:06 To: Nur Imam Febrianto <nur_imam(a)outlook.com<mailto:nur_imam@outlook.com>>; oVirt Users <users(a)ovirt.org<mailto:users@ovirt.org>> Subject: RE: Problem with OVF and Bad Volume Specification Are you migrating data “storage domains” between data centers? This can only be accomplished between data centers of the same version (4.3, 4.4, 4.5) since the disk schema changes a bit between them. To move VM’s between you will need to add a storage domain as an “export” domain. Export storage domains are of a format that is accepted by all versions. My data storage domains are either iSCSI or FC (depending upon how it is attached) but I use NFS for export storage domains. Attach it to the volume as an export domain. Got to Compute > Virtual machines > Elipses (three dots in upper right corner), and select “Export to Export Domain” Once copied to the export domain, you can detach it, and move it on the destination. Once the export domain is attached, you can import the “VMs” which will copy them to a data domain on the destination. When detaching the export domain, I recommend deleting the contents, so you have a clean slate for the next more. You will also need to remove the VMs from the source, since they are not automatically deleted. (safety measure) From: Nur Imam Febrianto <nur_imam(a)outlook.com<mailto:nur_imam@outlook.com>> Sent: Tuesday, July 23, 2024 10:06 PM To: oVirt Users <users(a)ovirt.org<mailto:users@ovirt.org>> Subject: [ovirt-users] Problem with OVF and Bad Volume Specification Hi, Recently we are migrating our existing VM from Existing oVirt cluster, to new oVirt cluster (using el9) and Oracle OLVM. But we have this strange issue, after detaching storage domain, and then attaching the storage domain in new cluster, VM Impor tdoesnt shows up any vm that are located on this storage domain. In Disk Import, it shows a lot of disk with no aliases at all, and after we do trial and error with our disk, several disk are missing at all, no trace and no whereabout. After further investigation, OVF_STORE only contains 2 VM definition, not all the VM, and it guts truncated whenever we try to extract it using TAR. Update OVF doesnt help at all too. Anybody got any idea how to prevent or solve this ? We still have 3 storage domain and afraid the same thing will happened again. Thanks before. [View Less]

11 months, 2 weeks

1
0
0 / 0

Re: Problem with OVF and Bad Volume Specification

by Matthew.Stier＠fujitsu.com

Your experience is the same I had when attempting to move storage domains between 4.3 and 4.4 datacenters, because the data 4.4 could not read the 4.3 fomatted storage domains, and the 4.4 datacenter altered the storage domain enough, that I could not remount it on a 4.3 data center. Using 'export' storage domains, worked around this problem. Also, since export only copies the disks to the export storage domain, you can always delete them from the destination, and restart them on the source. … [View More]Of course, this also means that you need to delete them from the source, once you are satisfied with their operation on the destination. From: Nur Imam Febrianto <nur_imam(a)outlook.com> Sent: Wednesday, July 24, 2024 10:38 PM To: Stier, Matthew <Matthew.Stier(a)fujitsu.com>; oVirt Users <users(a)ovirt.org> Subject: Re: Problem with OVF and Bad Volume Specification Correct. I'm migrating between datacenter that have a different hosted engine. Also using same version (source is oVirt 4.5 on el8, destionation is oVirt 4.5 on el9 and OLVM 4.5 on OL8). Why i need to add export domain ? The migration approach that i took is detaching storage domain from source cluster and then attaching it to the new cluster, not doing OVA Export from source and importing it in new cluster. I already read somewhere in the docs, it should be fine taking this approach as long the Storage Domain version and oVirt version are same. ________________________________ From: Matthew.Stier(a)fujitsu.com<mailto:Matthew.Stier@fujitsu.com> <Matthew.Stier(a)fujitsu.com<mailto:Matthew.Stier@fujitsu.com>> Sent: Thursday, 25 July 2024 05:06 To: Nur Imam Febrianto <nur_imam(a)outlook.com<mailto:nur_imam@outlook.com>>; oVirt Users <users(a)ovirt.org<mailto:users@ovirt.org>> Subject: RE: Problem with OVF and Bad Volume Specification Are you migrating data "storage domains" between data centers? This can only be accomplished between data centers of the same version (4.3, 4.4, 4.5) since the disk schema changes a bit between them. To move VM's between you will need to add a storage domain as an "export" domain. Export storage domains are of a format that is accepted by all versions. My data storage domains are either iSCSI or FC (depending upon how it is attached) but I use NFS for export storage domains. Attach it to the volume as an export domain. Got to Compute > Virtual machines > Elipses (three dots in upper right corner), and select "Export to Export Domain" Once copied to the export domain, you can detach it, and move it on the destination. Once the export domain is attached, you can import the "VMs" which will copy them to a data domain on the destination. When detaching the export domain, I recommend deleting the contents, so you have a clean slate for the next more. You will also need to remove the VMs from the source, since they are not automatically deleted. (safety measure) From: Nur Imam Febrianto <nur_imam(a)outlook.com<mailto:nur_imam@outlook.com>> Sent: Tuesday, July 23, 2024 10:06 PM To: oVirt Users <users(a)ovirt.org<mailto:users@ovirt.org>> Subject: [ovirt-users] Problem with OVF and Bad Volume Specification Hi, Recently we are migrating our existing VM from Existing oVirt cluster, to new oVirt cluster (using el9) and Oracle OLVM. But we have this strange issue, after detaching storage domain, and then attaching the storage domain in new cluster, VM Impor tdoesnt shows up any vm that are located on this storage domain. In Disk Import, it shows a lot of disk with no aliases at all, and after we do trial and error with our disk, several disk are missing at all, no trace and no whereabout. After further investigation, OVF_STORE only contains 2 VM definition, not all the VM, and it guts truncated whenever we try to extract it using TAR. Update OVF doesnt help at all too. Anybody got any idea how to prevent or solve this ? We still have 3 storage domain and afraid the same thing will happened again. Thanks before. [View Less]

11 months, 2 weeks

1
0
0 / 0

Re: Problem with OVF and Bad Volume Specification

by Nur Imam Febrianto

Correct. I'm migrating between datacenter that have a different hosted engine. Also using same version (source is oVirt 4.5 on el8, destionation is oVirt 4.5 on el9 and OLVM 4.5 on OL8). Why i need to add export domain ? The migration approach that i took is detaching storage domain from source cluster and then attaching it to the new cluster, not doing OVA Export from source and importing it in new cluster. I already read somewhere in the docs, it should be fine taking this approach as long … [View More]the Storage Domain version and oVirt version are same. ________________________________ From: Matthew.Stier(a)fujitsu.com <Matthew.Stier(a)fujitsu.com> Sent: Thursday, 25 July 2024 05:06 To: Nur Imam Febrianto <nur_imam(a)outlook.com>; oVirt Users <users(a)ovirt.org> Subject: RE: Problem with OVF and Bad Volume Specification Are you migrating data “storage domains” between data centers? This can only be accomplished between data centers of the same version (4.3, 4.4, 4.5) since the disk schema changes a bit between them. To move VM’s between you will need to add a storage domain as an “export” domain. Export storage domains are of a format that is accepted by all versions. My data storage domains are either iSCSI or FC (depending upon how it is attached) but I use NFS for export storage domains. Attach it to the volume as an export domain. Got to Compute > Virtual machines > Elipses (three dots in upper right corner), and select “Export to Export Domain” Once copied to the export domain, you can detach it, and move it on the destination. Once the export domain is attached, you can import the “VMs” which will copy them to a data domain on the destination. When detaching the export domain, I recommend deleting the contents, so you have a clean slate for the next more. You will also need to remove the VMs from the source, since they are not automatically deleted. (safety measure) From: Nur Imam Febrianto <nur_imam(a)outlook.com> Sent: Tuesday, July 23, 2024 10:06 PM To: oVirt Users <users(a)ovirt.org> Subject: [ovirt-users] Problem with OVF and Bad Volume Specification Hi, Recently we are migrating our existing VM from Existing oVirt cluster, to new oVirt cluster (using el9) and Oracle OLVM. But we have this strange issue, after detaching storage domain, and then attaching the storage domain in new cluster, VM Impor tdoesnt shows up any vm that are located on this storage domain. In Disk Import, it shows a lot of disk with no aliases at all, and after we do trial and error with our disk, several disk are missing at all, no trace and no whereabout. After further investigation, OVF_STORE only contains 2 VM definition, not all the VM, and it guts truncated whenever we try to extract it using TAR. Update OVF doesnt help at all too. Anybody got any idea how to prevent or solve this ? We still have 3 storage domain and afraid the same thing will happened again. Thanks before. [View Less]

11 months, 2 weeks

1
0
0 / 0

Re: Problem with OVF and Bad Volume Specification

by Matthew.Stier＠fujitsu.com

Are you migrating data "storage domains" between data centers? This can only be accomplished between data centers of the same version (4.3, 4.4, 4.5) since the disk schema changes a bit between them. To move VM's between you will need to add a storage domain as an "export" domain. Export storage domains are of a format that is accepted by all versions. My data storage domains are either iSCSI or FC (depending upon how it is attached) but I use NFS for export storage domains. Attach it to … [View More]

11 months, 2 weeks

1
0
0 / 0

Problem with ovirt engine web portal

by aashish.dar＠gmail.com

hello, i'm getting a wired problem while login in web portal getting following error after login ???obrand.welcome.welcome.text??? ???obrand.welcome.version???

11 months, 2 weeks

1
0
0 / 0

Re: [External] : Problem with OVF and Bad Volume Specification

by John Priest

Hi Nur, OLVM is an Oracle Linux 8 based solution (both engine and KVM host) at this time. Send me a message or reach out to Oracle Support if you want to discuss this migration in more detail. John Priest Director OLVM/OVM Product Management 508.202.2534 From: Nur Imam Febrianto <nur_imam(a)outlook.com> Sent: Tuesday, July 23, 2024 11:06 PM To: oVirt Users <users(a)ovirt.org> Subject: [External] : [ovirt-users] Problem with OVF and Bad Volume Specification Hi, Recently we are … [View More]

11 months, 2 weeks

1
0
0 / 0

oVirt Nightly Grafana Login Issues

by nathan.english＠bt.com

Hi There, I am in the process of deploying a new oVirt environment which has taken a few days and a switch to nightly. I have successfully got the Hosted Engine up & running, however when I try to login to Grafana I get 'cannot remove last organization admin' when using the ovirt engine auth option. Does anyone know how to get passed this and successfully view the dashboards? Kind Regards, Nathan

11 months, 2 weeks

1
0
0 / 0

Fwd: Re: console certificate is not trusted

by suporte＠logicworks.pt

actually I'm using kubuntu I just install the certificate like this: sudo apt-get install -y ca-certificates sudo cp pki-resource.crt /usr/local/share/ca-certificates sudo update-ca-certificates and now I have this message: The certificate's owner does not match hostname '192.168.6.161' Any idea? Thanks José From: "David A. Stewart" <itsavant(a)gmail.com> To: suporte(a)logicworks.pt Sent: Thursday, July 18, 2024 5:20:19 PM Subject: Re: [ovirt-users] Re: console … [View More]certificate is not trusted No, but you do need to download the self-signed into you local certificate store On the main ovirt page https://<Your_FQDN>/ovirt-engine you'll see a link "Engine CA Certificate" Download it and click on it to install (assuming Windows client) On Thu, Jul 18, 2024 at 3:01 AM < [ mailto:suporte@logicworks.pt | suporte(a)logicworks.pt ] > wrote: Do I have to install a commercial certificate? thanks From: "David A. Stewart" < [ mailto:itsavant@gmail.com | itsavant(a)gmail.com ] > To: "Konstantin Shalygin" < [ mailto:k0ste@k0ste.ru | k0ste(a)k0ste.ru ] > Cc: [ mailto:suporte@logicworks.pt | suporte(a)logicworks.pt ] , "users" < [ mailto:users@ovirt.org | users(a)ovirt.org ] > Sent: Thursday, July 18, 2024 2:31:49 AM Subject: Re: [ovirt-users] Re: console certificate is not trusted User stated that upfront On Wed, Jul 17, 2024, 11:30 AM Konstantin Shalygin < [ mailto:k0ste@k0ste.ru | k0ste(a)k0ste.ru ] > wrote: BQ_BEGIN > On 17 Jul 2024, at 18:27, José Ferradeira via Users < [ mailto:users@ovirt.org | users(a)ovirt.org ] > wrote: > > I just install last ovirt version ( Version 4.5.6-1.el9) using CentOS Stream 9. > When trying to access the console get this error message: The certificate is not trusted. > > I'm using self signed certificate. > > Any idea? You are using self signed certificate Sent from my iPhone _______________________________________________ Users mailing list -- [ mailto:users@ovirt.org | users(a)ovirt.org ] To unsubscribe send an email to [ mailto:users-leave@ovirt.org | users-leave(a)ovirt.org ] Privacy Statement: [ https://www.ovirt.org/privacy-policy.html | https://www.ovirt.org/privacy-policy.html ] oVirt Code of Conduct: [ https://www.ovirt.org/community/about/community-guidelines/ | https://www.ovirt.org/community/about/community-guidelines/ ] List Archives: [ https://lists.ovirt.org/archives/list/users@ovirt.org/message/L7CKKRAC6EJ... | https://lists.ovirt.org/archives/list/users@ovirt.org/message/L7CKKRAC6EJ... ] BQ_END [View Less]

11 months, 2 weeks

1
1
0 / 0

Importing VM from Vmware

by domenc＠gmail.com

Hi, Migrating VMs from Vmware works nice in the UI but it's slow. With https://blogs.oracle.com/scoter/post/how-to-migrate-vmware-vsphere-to-ora... i'm trying to import exported VM virt-v2v \ –o rhv-upload \ –oc https://<OLVM-ENGINE-PORTAL>/ovirt-engine/api \ -op /root/olvm-admin-password-file \ -oo rhv-cacert=/root/ovirt-cacert.pem \ -oo rhv-cluster=<OLVM-CLUSTER> \ -os <OLVM_STORAGE_DOMAIN> \ -of qcow2 \ -oo rhv-direct \ --network <OLVM-NETWORK> \ … [View More]

11 months, 2 weeks

3
2
0 / 0

Problem with OVF and Bad Volume Specification

by Nur Imam Febrianto

Hi, Recently we are migrating our existing VM from Existing oVirt cluster, to new oVirt cluster (using el9) and Oracle OLVM. But we have this strange issue, after detaching storage domain, and then attaching the storage domain in new cluster, VM Impor tdoesnt shows up any vm that are located on this storage domain. In Disk Import, it shows a lot of disk with no aliases at all, and after we do trial and error with our disk, several disk are missing at all, no trace and no whereabout. After … [View More]

11 months, 2 weeks

1
0
0 / 0

Help with Storage Domain Configuration in oVirt

by Maria Jonas

Hi everyone, I am setting up a new storage domain in oVirt and running into a bit of trouble. I’ve followed the setup guide but the storage domain isn’t showing up in the “Storage” section of the admin portal... Here’s what I’ve done so far::- -Created the storage domain in the setup wizard. -Checked network connections and permissions. -Verified that the storage is correctly formatted and accessible. Is there something I might have missed, or any common issues with storage domain … [View More]

11 months, 2 weeks

2
1
0 / 0

Re: HostedEngine migration fail

by doboscsongor＠gmail.com

I tryed your sugestion and looks good now :) the silver crown appeared. One more question regarding this topic: - I will have one cluster with 8 phisycal hosts added, to have a full redundancy for hosted engine also, I need to make this steps to all of the hosts added to the cluster?

11 months, 2 weeks

2
1
0 / 0

Problem with Glusterfs Distributed-Replicated volume almost full but only less than 50% used by files.

by Olivier

Hi, I have a weird problem with my couple Glusterfs-oVirt: I had two data domain for my VMs on oVirt. The main one (data) is a Distributed-Replicate with 2 x 3 = 6 bricks of ~ 1,4 Tb on 3 servers (2 bricks by server). It was an extend of a previous 1 x 3 = 3 Replicated volume on the same servers. I had one new disk (and one new brick) on each of these 3 servers. My concern is the reported use of this volume (almost 100%). a df -h give me : df -h . Filesystem Size Used Avail … [View More]Use% Mounted on ovirt1.pmmg.priv:/data 3.4T 3.3T 84G 98% /rhev/data-center/mnt/glusterSD/ovirt1.pmmg.priv:_data but a du of the same partition give me : du -hs /rhev/data-center/mnt/glusterSD/ovirt1.pmmg.priv:_data 1.4T /rhev/data-center/mnt/glusterSD/ovirt1.pmmg.priv:_data and there no hidden folder I could miss in this mount point. The weird point (the second one) is when I delete a VMs and is disks (main disk and snapshot) I doesn't get back some space on these volume. Does anyone have an idea of these problem ? Thank's Here the Info of the gluster volume : gluster volume info data Volume Name: data Type: Distributed-Replicate Volume ID: 22b7942e-2952-40d4-ab92-64636e3ce409 Status: Started Snapshot Count: 0 Number of Bricks: 2 x 3 = 6 Transport-type: tcp Bricks: Brick1: ovirt1.pmmg.priv:/gluster_bricks/data/data Brick2: ovirt2.pmmg.priv:/gluster_bricks/data/data Brick3: ovirt3.pmmg.priv:/gluster_bricks/data/data Brick4: ovirt1.pmmg.priv:/gluster_bricks/data_extend1/data Brick5: ovirt2.pmmg.priv:/gluster_bricks/data_extend1/data Brick6: ovirt3.pmmg.priv:/gluster_bricks/data_extend1/data Options Reconfigured: features.shard-block-size: 128MB cluster.lookup-optimize: off server.keepalive-count: 5 server.keepalive-interval: 2 server.keepalive-time: 10 server.tcp-user-timeout: 20 performance.client-io-threads: on nfs.disable: on storage.fips-mode-rchecksum: on transport.address-family: inet performance.quick-read: off performance.read-ahead: off performance.io-cache: off performance.low-prio-threads: 32 network.remote-dio: disable cluster.eager-lock: enable cluster.quorum-type: auto cluster.server-quorum-type: server cluster.data-self-heal-algorithm: full cluster.locking-scheme: granular cluster.shd-max-threads: 8 cluster.shd-wait-qlength: 10000 features.shard: on user.cifs: off cluster.choose-local: off client.event-threads: 4 server.event-threads: 4 storage.owner-uid: 36 storage.owner-gid: 36 network.ping-timeout: 20 performance.strict-o-direct: on cluster.granular-entry-heal: enable features.trash: off [View Less]

11 months, 2 weeks

2
4
0 / 0

PVLAN on oVirt

by De Lee

Hi, Do you have chance to implement the PVLAN functionality with OVN for oVirt newer location?

11 months, 2 weeks

1
0
0 / 0

Get Host Capabilities failed: Connection timeout for host

by Frederico Madeira

Hi guys I'm getting these messages from engine-gui interfaces.: Get Host Capabilities failed: Connection timeout for host My hosts are in irresponsible state My VMs are in unknown state My Storage are in inactive state From the engine, I did successfully : ping ip and name and ssh connect to host my hosts, so I didn´t have network connectivity problems. error in engine.log 2024-07-10 03:47:30,088-03 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-… [View More]

11 months, 3 weeks

1
0
0 / 0

Re: HostedEngine migration fail

by doboscsongor＠gmail.com

Yes, I have only the gold crown on the host where the hosted engine is running. On the second host, there is no crown; that field is empty. When I installed it, I deployed the hosted engine on the host where I have the gold crown. After this step, I created the cluster and added the second host. Do I need to perform any additional steps every time I add a new host to the cluster to be able to migrate the hosted engine VM?

11 months, 3 weeks

2
1
0 / 0

Re: HostedEngine migration fail

by doboscsongor＠gmail.com

The "crown" symbol is on the host where the engine-host vm is running.

11 months, 3 weeks

2
1
0 / 0

Re: HostedEngine migration fail

by doboscsongor＠gmail.com

The "crown" symbol is on the host where the engine-host vm is running.

11 months, 3 weeks

1
0
0 / 0

Hosted engine deployment fails on Rocky Linux 9

by mpelicci＠cisco.com

Trying to do a fresh install of ovirt 4.5 on a Rocky Linux 9 host. While running the hosted-engine --deploy --4, I input all of the information. Why is it that the hosted engine is trying to reach out to the CentOS8 repos and is there a way for me to pause the deployment to modify the repo files on the vm? [ INFO ] TASK [ovirt.ovirt.engine_setup : Install oVirt Engine package] [ ERROR ] fatal: [localhost -> 192.168.1.103]: FAILED! => {"changed": false, "msg": "Failed to download metadata … [View More]

11 months, 3 weeks

3
2
0 / 0

oVirt 4.5.5 compatibility with CPU

by jakov.jelinic＠adriatic.hr

Hi, We plan to install ovirt node 4.5.5 (https://resources.ovirt.org/pub/ovirt-4.5/iso/ovirt-node-ng-installer/) on our 2 new servers, but looking at the documentation (https://www.ovirt.org/documentation/installing_ovirt_as_a_self-hosted_eng...) it seems that oVirt is not compatible with our CPU Intel Xeon Silver 4410Y 12C 150 W 2 .0 GHz processor? Can you help us?

11 months, 3 weeks

6
6
0 / 0

fence_rhevm with oVirt >4.5

by justindavis＠mail.utexas.edu

Hello Folks Is the "fence_rhevm" package compatible with oVirt >4.5? We're converting our legacy RHV cluster to a new install of oVirt latest with NFS backed storage. Everything has been working smoothly with the exception of the RHV-M fencing device on this newly provisioned oVirt 4.5.7 cluster with RHEL 9.4 hosts -- I haven't been able to get authentication working between the fencing device and the manager appliance. The same configuration is working on both the legacy RHV 4.4 cluster (… [View More]

11 months, 3 weeks

2
1
0 / 0

New Member Introduction

by Maria Jonas

Hi everyone, I am new to this forum. I am excited to be here and to learn more about oVirt. I have just started exploring oVirt, and I have a few questions. Could someone please guide me on how to ask questions here ? Where should I post if I have a query ? Looking forward to your advice and connecting with you all. Thanks

11 months, 3 weeks

2
1
0 / 0

Network issue - self-hosted engine on a single host

by jakov.jelinic＠adriatic.hr

Hi, I'm confused about installing ovirt as a self-hosted engine on a single host with local storage. I have one server which I have connected to 2 switches (which are in "Cisco stack"). I have connected the server with 2 UTP cables in master switch and 2 UTP cables in slave. I have installed on server Rocky Linux 9.4. And now i have 4 network interfaces (4 ip addresses) which i can ping from my computer. After that I installed ovirt engine 4.5.6-1.el9 with the next commands: > dnf install … [View More]centos-release-ovirt45 > dnf install ovirt-engine > engine-setup Next step, I want to add a new host through my engine (Compute -> Hosts -> New). I started installing a new host. I choose my hostname to be my one and only server. After installation, I can no longer connect to my server: https://vhost01.testing.local/ovirt-engine/ because the ip address behind the dns name can no longer be pinged. Out of my 4 IP addresses, I can now ping only one from my computer. And then, of course, I change the DNS record and set it to that one-onlyworking IP address. So I think after adding the host my network is messed up. It even makes sense to me since everything is done on one host, and it seems to me that if I had separated the engine, it would not have these problems. This was my network before adding new host: ens13f0np0: connected to ens13f0np0 "Broadcom and subsidiaries BCM57454 NetXtreme-E 10Gb/25Gb/40Gb/50Gb/100Gb" ethernet (bnxt_en), 14:23:F2:5A:B8:E4, hw, mtu 1500 ip4 default inet4 192.168.50.60/24 route4 192.168.50.0/24 metric 100 route4 default via 192.168.50.2 metric 100 inet6 fe80::1623:f2ff:fe5a:b8e4/64 route6 fe80::/64 metric 1024 ens13flnpl: connected to ens13flnpl "Broadcom and subsidiaries BCM57454 NetXtreme-E 10Gb/25Gb/40Gb/50Gb/100Gb" ethernet (bnxt_en), 14:23:F2:5A:B8:E5, hw, mtu 1500 inet4 192.168.50.54/24 route4 192.168.50.0/24 metric 101 route4 default via 192.168.50.2 metric 101 inet6 fe80::1623:f2ff:fe5a:b8e5/64 route6 fe80::/64 metric 1024 ens13f2np2: connected to ens13f2np2 "Broadcom and subsidiaries BCM57454 NetXtreme-E 10Gb/25Gb/40Gb/50Gb/100Gb" ethernet (bnxt_en), 14:23:F2:5A:B8:E6, hw, mtu 1500 inet4 192.168.50.78/24 route4 192.168.50.0/24 metric 102 route4 default via 192.168.50.2 metric 102 inet6 fe80::1623:f2ff:fe5a:b8e6/64 route6 fe80::/64 metric 1024 ens13f3np3: connected to ens13f3np3 "Broadcom and subsidiaries BCM57454 NetXtreme-E 10Gb/25Gb/40Gb/50Gb/100Gb" ethernet (bnxt_en), 14:23:F2:5A:B8: E7, hw, mtu 1500 inet4 192.168.50.109/24 route4 192.168.50.0/24 metric 103 route4 default via 192.168.50.2 metric 103 inet6 fe80::1623:f2ff:fe5a:b8e7/64 route6 fe80::/64 metric 1024 lo: connected (externally) to lo "10" loopback (unknown), 00:00:00:00:00:00, sw, mtu 65536 inet4 127.0.0.1/8 inet6 ::1/128 route6:1/128 metric 256 virbro: connected (externally) to virbro "virbro" bridge, 52:54:00:11:F7:8C, sw, mtu 1500 inet4 192.168.122.1/24 route4 192.168.122.0/24 metric 0 and this is after adding new host: ens13f1np1: connected to ens13f1np1 "Broadcom and subsidiaries BCM57454 NetXtreme-E 10Gb/25Gb/40Gb/50Gb/100Gb" ethernet (bnxt_en), 14:23:F2:5A:B8:E5, hw, mtu 1500 ip4 default inet4 192.168.50.54/24 route4 192.168.50.0/24 metric 100 route4 default via 192.168.50.2 metric 100 inet6 fe80::1623:f2ff:fe5a:b8e5/64 route6 fe80::/64 metric 1024 ovirtmgmt: connected to ovirtmgmt "ovirtmgmt" bridge, 14:23:F2:5A:B8:E4, sw, mtu 1500 inet4 192.168.50.60/24 route4 192.168.50.0/24 metric 425 inet6 fe80::1623:f2ff:fe5a:b8e4/64 route6 fe80::/64 metric 1024 ens13f2np2: connected to ens13f2np2 "Broadcom and subsidiaries BCM57454 NetXtreme-E 10Gb/25Gb/40Gb/50Gb/100Gb" ethernet (bnxt_en), 14:23:F2:5A:B8:E6, hw, mtu 1500 inet4 192.168.50.78/24 route4 192.168.50.0/24 metric 101 route4 default via 192.168.50.2 metric 101 inet6 fe80::1623:f2ff:fe5a:b8e6/64 route6 fe80::/64 metric 1024 ens13f3np3: connected to ens13f3np3 "Broadcom and subsidiaries BCM57454 NetXtreme-E 10Gb/25Gb/40Gb/50Gb/100Gb" ethernet (bnxt_en), 14:23:F2:5A:B8:E7, hw, mtu 1500 inet4 192.168.50.109/24 route4 192.168.50.0/24 metric 102 route4 default via 192.168.50.2 metric 102 inet6 fe80::1623:f2ff:fe5a:b8e7/64 route6 fe80::/64 metric 1024 ens13f0np0: connected to ens13f0np0 "Broadcom and subsidiaries BCM57454 NetXtreme-E 10Gb/25Gb/40Gb/50Gb/100Gb" ethernet (bnxt_en), 14:23:F2:5A:B8:E4, hw, mtu 1500 master ovirtmgmt lo: connected (externally) to lo "lo" loopback (unknown), 00:00:00:00:00:00, sw, mtu 65536 inet4 127.0.0.1/8 inet6 ::1/128 route6 ::1/128 metric 256 br-int: disconnected "br-int" ovs-interface (openvswitch), 12:47:1C:18:8F:E2, sw, mtu 1500 Can you plese help? [View Less]

11 months, 3 weeks

2
1
0 / 0

HostedEngine migration fail

by doboscsongor＠gmail.com

Hi, I have two hosts in one cluster, where the hosts are exactly the same physical servers. The migration of virtual machines works fine, but I can't migrate the hosted engine VM. When I try to migrate it to the second host/server, the "Destination host" field in the migration pop-up window shows "No available host to migrate VMs to." However, if I try to migrate any other running VMs, the field becomes active and I can choose the second host/server. Screenshot: https://i.postimg.cc/YCnddhs1/… [View More]

11 months, 3 weeks

2
1
1 / 0

[Self-hosted engine] Change port for web portal

by junhoyu＠beamworks.co.kr

Hi everyone, I've installed oVirt (specifically Oracle Linux Virtualization Manager v.4.5) on my server using the Self-Hosted Deployment method. However, my server is in an environment where using well-known ports is restricted. Therefore, I need to reconfigure the ports for the web portal, which currently uses ports 80 and 443, so that I can access the web portal through the browser. I tried the following two methods: === Method 1 === During installation, I prepared an answer file (/root/… [View More]

11 months, 3 weeks

1
0
0 / 0

lvm.log is growing

by dev＠eazis.com

Hi, The file /tmp/lvm.log is growing every day. I need to clear the file once in the two weeks. Can anyone tell me how i can rotate this log file? Kind regards, Gerjan

11 months, 3 weeks

1
0
0 / 0

Start VM with option -machine smm=off

by Kalil de A. Carvalho

Hello all. I'm trying to workaround the problem reported here: https://gitlab.com/qemu-project/qemu/-/issues/1198 but I did not find out how to start up the VM with the option -machine smm=off like sead on the lsit above. I guess that it is possible to run the command using the qemu command but I think that I will lose the management of it. It is possible to startup up a VM with this option using the oVirt GUI ou virsh? Best regards -- Atenciosamente, Kalil de A. Carvalho

11 months, 3 weeks

3
2
0 / 0

New oVirt release ???

by Diggy

Any movement towards a new oVirt release now that CentOS Stream 8 is officially at EOL and the current engine is based on it? Do I see oVirt v4.6 in my near future? I'm looking for a reason to build a fresh oVirt environment and migrate our 100+ VMs to it. :) ---

11 months, 3 weeks

6
10
0 / 0

ovirt.ovirt

by james.parsons1＠arcelormittal.com

I would like to get ovirt.ovirt. working in my environment which run on oracle KVM, and I have an oracle automation manager 1. I've tried installing ovirt.ovirt packages on my OAM with no like ., 2. I installed the packages on my Hosts, but I'm still unable to run any of the packages Do I need to install the packages on my hosted-engine ? Regards James Parsons

11 months, 3 weeks

1
0
0 / 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Users July 2024