- Users - oVirt List Archives

[Users] Upgrading dwh and reports from 3.3.4 to 3.4.0?
by Gianluca Cecchi 06 Apr '14

06 Apr '14

Hello, on F19 I upgraded engine from 3..3.4 to 3.4.0. Then yum update ovirt-engine-dwh ovirt-engine-reports ... Running transaction Installing : ovirt-engine-dwh-setup-3.4.0-2.fc19.noarch 1/8 Installing : ovirt-engine-reports-setup-3.4.0-2.fc19.noarch 2/8 Updating : jasperreports-server-5.5.0-7.fc19.noarch 3/8 Updating : ovirt-engine-reports-3.4.0-2.fc19.noarch 4/8 Updating : ovirt-engine-dwh-3.4.0-2.fc19.noarch 5/8 Cleanup : ovirt-engine-reports-3.3.4-1.fc19.noarch 6/8 Cleanup : jasperreports-server-5.5.0-1.noarch 7/8 Cleanup : ovirt-engine-dwh-3.3.4-1.fc19.noarch 8/8 Verifying : jasperreports-server-5.5.0-7.fc19.noarch 1/8 Verifying : ovirt-engine-reports-setup-3.4.0-2.fc19.noarch 2/8 Verifying : ovirt-engine-dwh-setup-3.4.0-2.fc19.noarch 3/8 Verifying : ovirt-engine-dwh-3.4.0-2.fc19.noarch 4/8 Verifying : ovirt-engine-reports-3.4.0-2.fc19.noarch 5/8 Verifying : jasperreports-server-5.5.0-1.noarch 6/8 Verifying : ovirt-engine-reports-3.3.4-1.fc19.noarch 7/8 Verifying : ovirt-engine-dwh-3.3.4-1.fc19.noarch 8/8 Dependency Installed: ovirt-engine-dwh-setup.noarch 0:3.4.0-2.fc19 ovirt-engine-reports-setup.noarch 0:3.4.0-2.fc19 Updated: ovirt-engine-dwh.noarch 0:3.4.0-2.fc19 ovirt-engine-reports.noarch 0:3.4.0-2.fc19 Dependency Updated: jasperreports-server.noarch 0:5.5.0-7.fc19 Complete! But now I see I have neither ovirt-engine-dwh-setup nor ovirt-engine-reports.setup as in 3.3.4... What to do? I only see this thread http://lists.ovirt.org/pipermail/users/2014-March/022205.html and other infos that suggests for new installation engine-setup should care about dwh too (but I don't know for reports...) What about pre-existing 3.3.4 installations with dwh and reports? The engine-setup for upgrade from 3.3.4 to 3.4 didn't notice anything about dwh/reports and didn't update any package: --== CONFIGURATION PREVIEW ==-- Engine database name : engine Engine database secured connection : False Engine database host : localhost Engine database user name : engine Engine database host name validation : False Engine database port : 5432 NFS setup : True Firewall manager : iptables Update Firewall : True Configure WebSocket Proxy : True Host FQDN : tekkaman.localdomain.local NFS mount point : /ISO Set application as default page : True Configure Apache SSL : False Require packages rollback : False Upgrade packages : True Please confirm installation settings (OK, Cancel) [OK]: If I try to run engine-setup again I get [root@tekkaman ~]# engine-setup [ INFO ] Stage: Initializing [ INFO ] Stage: Environment setup Configuration files: ['/etc/ovirt-engine-setup.conf.d/10-packaging-aio.conf', '/etc/ovirt-engine-setup.conf.d/10-packaging.conf', '/etc/ovirt-engine-setup.conf.d/20-setup-aio.conf', '/etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf'] Log file: /var/log/ovirt-engine/setup/ovirt-engine-setup-20140405184435.log Version: otopi-1.2.0 (otopi-1.2.0-1.fc19) [ ERROR ] Failed to execute stage 'Environment setup': initial_value must be unicode or None, not str [ INFO ] Stage: Clean up Log file is located at /var/log/ovirt-engine/setup/ovirt-engine-setup-20140405184435.log [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Execution of setup failed If I patch as in http://gerrit.ovirt.org/#/c/26005/ I get # engine-setup [ INFO ] Stage: Initializing [ ERROR ] Failed to execute stage 'Initializing': type object 'ConfigEnv' has no attribute 'LEGACY_REPORTS_WAR' [ INFO ] Stage: Clean up Log file is located at /var/log/ovirt-engine/setup/ovirt-engine-setup-20140405190842.log [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Execution of setup failed any hint? Gianluca

2 19

[Users] It is Ok using OVIRT in production environment ?
by tristano82＠libero.it 06 Apr '14

06 Apr '14

Hello, actually we have a cluster of RHEV nodes, and other one cluster with vmware nodes. I'm so excited about the works that community are doing with ovirt, but all of my sysadmin said me that cannot be used in production, because there is not a very stable release and because they need to spend too much time in upgrading node and manager. What do you think? Thanks Marco

3 2

Re: [Users] set computername and domain when vm is created from template.
by Itamar Heim 06 Apr '14

06 Apr '14

On 04/06/2014 11:32 AM, Jeff Clay wrote: > What about joining to a domain? > should also work with sysprep. > > On Sun, Apr 6, 2014 at 3:28 AM, Jeff Clay <jeffclay(a)gmail.com > <mailto:jeffclay@gmail.com>> wrote: > > Ok, I hadn't tried that yet. Let me give it a shot. Thanks for the info. > > > On Sun, Apr 6, 2014 at 3:02 AM, Itamar Heim <iheim(a)redhat.com > <mailto:iheim@redhat.com>> wrote: > > On 04/06/2014 09:48 AM, Jeff Clay wrote: > > i'm needing to change the computer name to something based > on the vm's > name or something and add the system to an active directory > domain. this > needs to be done when i create new vm's from a template. any > suggestions? from what i'm reading, cloud-init is what i'm > needing to > use, i installed and ran it to check it out. it changed the > computer > name, but i can't find where to specify the computer name > value or how > to set domain info. > > > sysprep has this support, just create a teamplate from a VM > sealed with sysprep. ovirt will pass the sysprep file via a > floppy to the VM (vm name will be the vm name). > > >

1 0

[Users] Force certain VMs to be on different hosts
by Scott Ocken 06 Apr '14

06 Apr '14

This message is in MIME format. --=_6jyb8zehjukgok Content-Type: text/plain; charset=ISO-8859-1; DelSp="Yes"; format="flowed" Content-Disposition: inline Content-Transfer-Encoding: 7bit Is there a way to have certain VMs to be on different hosts? (assuming there are enough hosts) IE. I have a db cluster of 3 VMs. I would like each one to always be on different hosts. That way if a host goes down my db cluster is still happy while migration happens. Or if migration fails I am still good. Thanks Scott --=_6jyb8zehjukgok Content-Type: application/pgp-keys Content-Description: PGP Public Key Content-Disposition: inline Content-Transfer-Encoding: 7bit -----BEGIN PGP PUBLIC KEY BLOCK----- Version: GnuPG v1.2.6 (GNU/Linux) mQGiBEbfI1QRBADVdW9cuyAvTnC21nOF5PN1orkrvE8kGf6I37YY9k4KHzrho+aH K/MACOhgOw2vuluAmxnx3aI82CQdXn0DSi15etvapSE/fqoBypeUfnU1hhq8kZlL N6Gc9584avtlO6+vfKrP8f6pirimmTExvA3mJITlboZDg64yY1rbV8DOwwCgz8/k pVhao/WMco0f5MmZO9CPqG0D/jAjmsR3KoodewzwKF+LXU9G3a/ubtpUn7ktt4s0 xbHjySI/DroJyVJbRfGDIif6Uoor9fJM0t6U2jqJEs+tmvEfMnkU2m3Zp1dFZbXk Qg9mkcXNd0vMQL+YQiNosE6AJhv07vgLCFwybEV/+u1UXvL2IKVGQvrQxrYN2BPu OM9xBACNeTE1b8TOk4xU/0UEAZp8XO1D9YEVizQTxZZVhcoooJAFu4uZIdhXagKK lsNWk6jkjsrb288PsEnMgKTsGkViJ+fbn7VF7rSkVjD52PZey7bFfw+joPpFJ8X5 uLP1P1YPuDfbZxqL4n8IV8Baw5NDEZVJuy/I+8ZeWfdzEeTx3bQiU2NvdHQgT2Nr ZW4gPHNjb3R0QGluZm9idW5rZXIuY29tPohbBBMRAgAbBQJG3yNUBgsJCAcDAgMV AgMDFgIBAh4BAheAAAoJEH7YIuikyNydli0An2mZ8ADawZmzfVM3SqSsgSgNaAs7 AKDH5i/dIc+LQS8LjsOFPCx5U7R817kBDQRG3yNVEAQAzorJIFPmVP46r02Y4IfM NH2f0BAYvOAt3iGXFBf1VfbeztihJZ8SdM2fjK6SX3tstuzohCes7+1+xCiaHlgF BCnQiw7zMC0GDQIhuHI+/41pbjTdSdw11DRUnZchaid3f8ImjidTAdhv2stNJxPl FufmkfgtUCqnDqYnDOdg9WMAAwYD/RvqX2+Bm/vEJIN8RDYfBI3Y3xPwfNL1wECS wHaJvxHTCKasnSRquA7k5GpS8+L1pjyxI/q/jbzVNdgOW1i3p6UZEL05dQhinREt sZMf5SbbCZADOqyekGubiHUDxjgz0cD9echtaUq4pr9thXtRD9ONfOM8SaAhXbH6 Uftb/kSLiEYEGBECAAYFAkbfI1UACgkQftgi6KTI3J0eaACdF3LUjihrLwIdU66u 81MDfuHnsr8AoMFYRGoZ99RHzb7FOpULHCASRRd7 =Hyro -----END PGP PUBLIC KEY BLOCK----- --=_6jyb8zehjukgok--

8 14

[Users] Hosted-Engine purpose for gateway check?
by Andrew Lau 06 Apr '14

06 Apr '14

Hi, I was recently playing around with the new ovirt 3.4 ga, I'm very happy all those issues I reported got fixed :D I found a new issue regarding the use of PREFIX vs NETMASK which I've uploaded here https://bugzilla.redhat.com/show_bug.cgi?id=1084685 Anyway -- I'm wondering what is the purpose for the gateway check in the hosted-engine setup? In my test case, I had the following NIC configuration eth0 - public (has gateway) eth1 - management eth1.1 - storage eth2 - vm data (no IP address) So during the hosted engine install, it will not let me assign eth2 as the NIC because it has no IP address or gateway. So I proceed to use eth1 instead as, as it has an IP address but again that would fail because no gateway. Luckily I have a L3 switch, so I put up a gateway for eth1 and that solved that issue. What is the gateway check supposed to achieve? I also tried to put in my eth0's IP address as the gateway but it still failed because of those config issues. If management/ovirtmgmt/vmdata are all on a L2 switch environment, effectively there becomes no gateway and it prevents the installation. Am I looking at this the wrong way? Thanks, Andrew

3 3

[Users] set computername and domain when vm is created from template.
by Jeff Clay 06 Apr '14

06 Apr '14

i'm needing to change the computer name to something based on the vm's name or something and add the system to an active directory domain. this needs to be done when i create new vm's from a template. any suggestions? from what i'm reading, cloud-init is what i'm needing to use, i installed and ran it to check it out. it changed the computer name, but i can't find where to specify the computer name value or how to set domain info.

3 2

[Users] how do you manually add ovirtmgmt network to a node/host
by Jeremiah Jahn 06 Apr '14

06 Apr '14

Trying to install ovirt node on an already existing kvm host. Used the "New" wizard from the engine. Things seemed to go ok ish until it got to the point where it wanted to install networking. No real errors, but has "One of the Logical Networks defined for this Cluster is Unreachable by the Host." error sitting on it. I tried dragging that network onto one of the interfaces of my host, which already has an IP address, as that's how I ssh to it, and it then took down the interface and tried to dhcp an ip for it which failed after a while, and resulted in udev stuck in an infinite loop taking down and bringing up said interface. Not really sure what's going on or what it's trying to accomplish. I set the ovrtmgmt network to have the same vlan id as the ethernet device i dragged it onto. thanks for any help.

2 6

[Users] Otopi pre-seeded Apache redirect directive ignored by engine-setup 3.4.0 GA
by Giuseppe Ragusa 06 Apr '14

06 Apr '14

--_e7435583-308a-4409-acfd-c6a2139dbeac_ Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi all=2C I tried pre-seeding engine-setup (part of a from scratch self-hosted-engine= full reinstallation) as per subject with: OVESETUP_APACHE/configureRootRedirection=3Dbool:False but the /etc/httpd/conf.d/ovirt-engine-root-redirect.conf file gets created= anyway with usual content. If needed=2C I can provide logs as soon as I manage to start my Engine VM a= gain (just reported a separate bug on ovirt-hosted-engine-setup). Obviously that's just a nuisance (comment-out/remove the ovirt-engine-root-= redirect.conf file=2C restart Apache and it works as desired): I just wante= d to notify it (can open BZ# if it helps). Regards=2C Giuseppe = --_e7435583-308a-4409-acfd-c6a2139dbeac_ Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <html> <head> <style></style></head> <body class=3D'hmmessage'><div dir=3D'ltr'>Hi all=2C<br>I tried pre-seeding= engine-setup (part of a from scratch self-hosted-engine full reinstallatio= n) as per subject with:<br><br>OVESETUP_APACHE/configureRootRedirection=3Db= ool:False<br><br>but the /etc/httpd/conf.d/ovirt-engine-root-redirect.conf = file gets created anyway with usual content.<br><br>If needed=2C I can prov= ide logs as soon as I manage to start my Engine VM again (just reported a s= eparate bug on ovirt-hosted-engine-setup).<br><br>Obviously that's just a n= uisance (comment-out/remove the ovirt-engine-root-redirect.conf file=2C res= tart Apache and it works as desired): I just wanted to notify it (can open = BZ# if it helps).<br><br>Regards=2C<br>Giuseppe<br> </div></body= > </html>= --_e7435583-308a-4409-acfd-c6a2139dbeac_--

2 4

[Users] Processor Type
by Maurice James 05 Apr '14

05 Apr '14

------=_NextPart_000_00C1_01CF4298.17B035C0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit How do I assign a different processor type to an individual VM? (Sandy Bridge, Conroe, etc) ------=_NextPart_000_00C1_01CF4298.17B035C0 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" = xmlns:o=3D"urn:schemas-microsoft-com:office:office" = xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" = xmlns=3D"http://www.w3.org/TR/REC-html40"><head><META = HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; = charset=3Dus-ascii"><meta name=3DGenerator content=3D"Microsoft Word 15 = (filtered medium)"><style></style></head><body lang=3DEN-US = link=3D"#0563C1" vlink=3D"#954F72"><div class=3DWordSection1><p = class=3DMsoNormal style=3D'margin-top:12.0pt'>How do I assign a = different processor type to an individual VM? (Sandy Bridge, Conroe, = etc)<o:p></o:p></p></div></body></html> ------=_NextPart_000_00C1_01CF4298.17B035C0--

5 6

[Users] TSC clocksource gets lost after live migration
by Markus Stockhausen 05 Apr '14

05 Apr '14

------=_NextPartTM-000-bf1f3448-4cf7-4f81-b33a-060c7d113f51 Content-Type: multipart/alternative; boundary="_000_12EF8D94C6F8734FB2FF37B9FBEDD17358615C53EXCHANGEcollogi_" --_000_12EF8D94C6F8734FB2FF37B9FBEDD17358615C53EXCHANGEcollogi_ Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hello, we have an up to date ovirt 3.4 installation. Inside we are running SLES11 = SP3 VMs (Kernel 3.0.76-0.11). After live migration of these VMs they all of a s= udden do not react any longer and CPU usage of the VM goes to 100%. We identified kvm-clock source to be the culprit and therefore switched to = another clocksource. We ended with hpet but are not happy with that as our inital g= oal was to use the more simple designed TSC clocksoure. The reason behind that is the question I have for you experts. Our hosts all have the constant_tsc CPU flag available. Just to mention the= se are not identical hosts. We have a mix of Xeon 5500 and 5600 machines. E.G. [root@colovn01 ~]# cat /proc/cpuinfo | grep constant_tsc | wc -l 8 When we start the VM the client sees TSC as available clocksource: colvm53:~ # cat /sys/devices/system/clocksource/clocksource0/available_cloc= ksource kvm-clock tsc hpet acpi_pm After the first live migration to another host that also has constant_tsc (= see above) that flag is lost inside the VM. colvm53:~ # cat /sys/devices/system/clocksource/clocksource0/available_cloc= ksource kvm-clock hpet acpi_pm Any ideas? Markus --_000_12EF8D94C6F8734FB2FF37B9FBEDD17358615C53EXCHANGEcollogi_ Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <html dir=3D"ltr"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Diso-8859-= 1"> <style id=3D"owaParaStyle" type=3D"text/css">P {margin-top:0;margin-bottom:= 0;}</style> </head> <body ocsi=3D"0" fpstyle=3D"1"> <div style=3D"direction: ltr;font-family: Tahoma;color: #000000;font-size: = 10pt;">Hello,<br> <br> we have an up to date ovirt 3.4 installation. Inside we are running SLES11 = SP3<br> VMs (Kernel 3.0.76-0.11). After live migration of these VMs they all of a s= udden<br> do not react any longer and CPU usage of the VM goes to 100%.<br> <br> We identified kvm-clock source to be the culprit and therefore switched to = another<br> clocksource. We ended with hpet but are not happy with that as our inital g= oal<br> was to use the more simple designed TSC clocksoure. <br> <br> The reason behind that is the question I have for you experts.<br> <br> Our hosts all have the constant_tsc CPU flag available. Just to mention the= se<br> are not identical hosts. We have a mix of Xeon 5500 and 5600 machines. E.G.= <br> [root@colovn01 ~]# cat /proc/cpuinfo | grep constant_tsc | wc -l<br> 8<br> <br> When we start the VM the client sees TSC as available clocksource:<br> <br> colvm53:~ # cat /sys/devices/system/clocksource/clocksource0/available_cloc= ksource<br> kvm-clock tsc hpet acpi_pm<br> <br> After the first live migration to another host that also has constant_tsc (= see above)<br> that flag is lost inside the VM.<br> <br> colvm53:~ # cat /sys/devices/system/clocksource/clocksource0/available_cloc= ksource<br> kvm-clock hpet acpi_pm<br> <br> Any ideas?<br> <br> Markus<br> <br> <br> </div> </body> </html> --_000_12EF8D94C6F8734FB2FF37B9FBEDD17358615C53EXCHANGEcollogi_-- ------=_NextPartTM-000-bf1f3448-4cf7-4f81-b33a-060c7d113f51 Content-Type: text/plain; name="InterScan_Disclaimer.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="InterScan_Disclaimer.txt" **************************************************************************** Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail ist nicht gestattet. Über das Internet versandte E-Mails können unter fremden Namen erstellt oder manipuliert werden. Deshalb ist diese als E-Mail verschickte Nachricht keine rechtsverbindliche Willenserklärung. Collogia Unternehmensberatung AG Ubierring 11 D-50678 Köln Vorstand: Kadir Akin Dr. Michael Höhnerbach Vorsitzender des Aufsichtsrates: Hans Kristian Langva Registergericht: Amtsgericht Köln Registernummer: HRB 52 497 This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden. e-mails sent over the internet may have been written under a wrong name or been manipulated. That is why this message sent as an e-mail is not a legally binding declaration of intention. Collogia Unternehmensberatung AG Ubierring 11 D-50678 Köln executive board: Kadir Akin Dr. Michael Höhnerbach President of the supervisory board: Hans Kristian Langva Registry office: district court Cologne Register number: HRB 52 497 **************************************************************************** ------=_NextPartTM-000-bf1f3448-4cf7-4f81-b33a-060c7d113f51--

3 4