- Users - oVirt List Archives

Re: [External] : Importing KVMs and QCOW
by Abe E 11 Mar '22

11 Mar '22

Thanks for the reply. Yes I was able to make it work in the end, for some reason Ovirt didnt recognize the QCOW or Raw files as they were, so instead I took the vmdk my vendor provided me and converted it to qcow and ovirt then recognized it correctly.

1 0

Import ova Thin provisioned disk conversion to pre allocated disks fails
by simon＠justconnect.ie 11 Mar '22

11 Mar '22

Hi All, During the ova import process, preallocated disk policy is selected and the VM is imported successfully. Unfortunately the disks remain as Thin Provisioned - is this a known bug and is there a workaround? Kind Regards Simon...

3 4

Long shot on VM failing to start
by simon＠justconnect.ie 11 Mar '22

11 Mar '22

We are moving to an oVirt 4.4.9 environment from a 4.3.4.3 environment and have run into a major issue. The method for migration to the new system is to shutdown a VM on the old system, build a new VM on the new system with the same IP/name etc. This has worked for several VMs so far but the latest new build failed and we had to roll back - i.e. start the old VM. The old VM fails to start with the following message in the VMs libvirt qemu log: libvirtd quit during handshake: Input/output error shutting down, reason=failed Any ideas? Regards Simon...

3 3

hosted-engine failed to deploy
by giovanni.ferioli＠gmail.com 11 Mar '22

11 Mar '22

hello i try to deploy a vm engine this host have already a vm that contains various service named dhcp etc i try to deploy with the cmd: hosted-engine --deploy and i get blocked with error msg INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Restore initial abrt config files] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Restart abrtd service] [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "Unable to restart service abrtd: Failed to restart abrtd.service: Transaction contains conflicting jobs 'stop' and 'restart' for abrt-ccpp.service. Probably contradicting requirement dependencies configured.\nSee system logs and 'systemctl status abrtd.service' for details.\n"} [ ERROR ] Failed to execute stage 'Closing up': Failed executing ansible-playbook [ INFO ] Stage: Clean up the host : oVirt Node 4.4.10 can you suggest some troubleshooting check ? thanks and regards

2 1

virt-viewer-x64.msi location
by auricomdyx＠gmail.com 10 Mar '22

10 Mar '22

Hello, I'm trying to download viewer for connecting to VMs, the documentation https://www.ovirt.org/documentation/virtual_machine_management_guide/index.… mentions the URL should be https://your-manager-fqdn/ovirt-engine/services/files/spice/virt-viewer-x64… However substituting my ovirt-engine hostname for "your-manager-fqdn", I get 404. I even SSH directly into hosted engine VM and was not able to locate virt-viewer-x64.msi on the file system. If I go to https://your-manager-fqdn/ovirt-engine/ landing page. The "Console Client Resources" goes to: https://www.ovirt.org/documentation/admin-guide/virt/console-client-resourc… Which is also a 404. Am I supposed to be downloading it from here (weary of unsigned publishers, but looks like the only place where this is located)? https://virt-manager.org/download/ Version is: Version 4.4.10.6-1.el8 Installed on: CentOS Stream 8 (8.5) Install instructions used: https://www.ovirt.org/documentation/installing_ovirt_as_a_self-hosted_engin…

3 3

Install hosted-engine - Task Get local VM IP failed
by florentl 10 Mar '22

10 Mar '22

Hi all, I try to install hosted-engine on node : ovirt-node-ng-4.2.3-0.20180518. Every times I get stuck on : [ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 50, "changed": true, "cmd": "virsh -r net-dhcp-leases default | grep -i 00:16:3e:6c:5a:91 | awk '{ print $5 }' | cut -f1 -d'/'", "delta": "0:00:00.108872", "end": "2018-06-01 11:17:34.421769", "rc": 0, "start": "2018-06-01 11:17:34.312897", "stderr": "", "stderr_lines": [], "stdout": "", "stdout_lines": []} I tried with static IP Address and with DHCP but both failed. To be more specific, I installed three nodes, deployed glusterfs with the wizard. I'm in a nested virtualization environment for this lab (Vmware Esxi Hypervisor). My node IP is : 192.168.176.40 / and I want the hosted-engine vm has 192.168.176.43. Thanks, Florent

7 17

Re: OVIRT INSTALLATION IN SAS RAID
by Muhammad Riyaz 09 Mar '22

09 Mar '22

I was unable to run LSPCI command since i am not able to boot with live cd or installing Linux to the server Here is some more details about driver that I catch after installing windows server 2012 Device Desscprition: DELL PERC 6/i Integrated Devive Instance path: PCI\VEN_1000&DEV_0060&SUBSYS_1F0C1028&REV_04\4&254D1C7F&0&0020 hardware ids : PCI\VEN_1000&DEV_0060&SUBSYS_1F0C1028&REV_04 PCI\VEN_1000&DEV_0060&SUBSYS_1F0C1028 PCI\VEN_1000&DEV_0060&CC_010400 PCI\VEN_1000&DEV_0060&CC_0104 Compatible IDS: PCI\VEN_1000&DEV_0060&REV_04 PCI\VEN_1000&DEV_0060 PCI\VEN_1000&CC_010400 PCI\VEN_1000&CC_0104 PCI\VEN_1000 PCI\CC_010400&DT_0 PCI\CC_010400 PCI\CC_0104&DT_0 PCI\CC_0104 driver version: 6.600.21.8 Matching device ID PCI\VEN_1000&DEV_0060&SUBSYS_1F0C1028 Service: Megasas Configuration ID megasas.inf:PCI\VEN_1000&DEV_0060&SUBSYS_1F0C1028,Install_INT.NT Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows ________________________________ This message (and any associated files) is intended only for the use of the individual or entity to which it is addressed and may contain information that is confidential, subject to copyright or constitutes a trade secret. If you are not the intended recipient you are hereby notified that any dissemination, copying or distribution of this message, or files associated with this message, is strictly prohibited. If you have received this message in error, please notify us immediately by replying to the message and deleting it from your computer. Messages sent to and from us may be monitored. Internet communications cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. Therefore, we do not accept responsibility for any errors or omissions that are present in this message, or any attachment, that have arisen as a result of e-mail transmission. If verification is required, please request a hard-copy version. Any views or opinions presented are solely those of the author and do not necessarily represent those of the company.

2 1

Re: oVirt reboot fails
by Strahil Nikolov 09 Mar '22

09 Mar '22

It seems that you are using EFI and something corrupted the installation. The fastest approach is to delete the oVirt node from the UI, reinstall and readd it back via the UI. I suspect something happened with your OS FS, but it could be a bug in the OS. If it was a regular CentOS Stream system, I wiuld follow https://access.redhat.com/solutions/3486741 Best Regards,Strahil Nikolov On Tue, Mar 8, 2022 at 8:25, dean--- via Users<users(a)ovirt.org> wrote: Rebooting oVirt fails on a RAID array installed on a Cisco UCS C220 M5. It fails using either legacy BIOS or UEFI with the error… error: ../../grub-core/fs/fshelp.c:258:file `//ovirt-node-ng-4.4.10.1-0.20220202.0+1/vmlinuz-4.18.0-358.el8.x86_64’ not found. Error: ../../grub-core/loader/i386/efi/linux.c:94:you need to load the kernel first. Press any key to continue… Failed to boot both default and fallback entries. Press any key to continue… Any attempts to recover using the installation/rescue ISO also fails and locks up. All Googled solutions I've tried so far have not worked. Does anyone know how to prevent this from happening and the correct method to recover when it does? Thanks! ... Dean _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/UYCJWN4AZZRWD…

1 0

Account on Zanata
by ちゃーりー 09 Mar '22

09 Mar '22

Hi, I'm Yoshihiro Hayashi, just an oVirt user. I found a mistake in Japanese translation on ovirt Web UI, I'm going to fix it. It would be grateful if someone could make an zanata account for me. Thank you, Yoshihiro Hayashi

3 4

New oVirt self-hosted engine deployment : design ideas
by ravi k 09 Mar '22

09 Mar '22

Hello, We are creating a self-hosted engine deployment and have come up with a draft design. I thought I'll get your thoughts on improving it. It is still a test setup and so we can make changes to make it resilient. We have four hosts, host01..04. I did the self-hosted engine deployment on the first node which created a dc, cluster01 and a storage domain hosted_storage. I added host02 also as a self-hosted engine host to cluster01. Now the questions :-) 1. It is recommended not to use this SD hosted_storage for regular VMs. So I'll create another SD dc_sd01. Should I use this dc_sd01 and cluster01 when creating regular VMs? What's the best practice? 2. It is a bit confusing to get my head around this concept of running regular VMs on these self-hosted engine hosts. Can I just run regular VMs in these hosts and they'll run fine? 3. Please do suggest any other recommendations from experience in terms of designing the clusters, storage domains etc. It'll help as it is a new setup and we have the scope to make changes. Regards, Ravi

2 2