- Users - oVirt List Archives

[Users] unable to create certificate authority during engine-setup
by Gianluca Cecchi 20 Dec '12

20 Dec '12

Hello, F18 AIO with ovirt nightly as of: ovirt-engine-3.2.0-1.20121219.gitcd0d2cc.fc18.noarch Trying to run engine-setup I get this error: Confirm root password : oVirt Engine will be installed using the following configuration: ================================================================= override-httpd-config: yes http-port: 80 https-port: 443 host-fqdn: myserver.mylocaldomain.com auth-pass: ******** org-name: MyOrg default-dc-type: NFS db-remote-install: local db-local-pass: ******** nfs-mp: /ISO override-iptables: yes config-allinone: yes storage-path: /DATA superuser-pass: ******** Proceed with the configuration listed above? (yes|no): yes Installing: AIO: Validating CPU Compatibility... [ DONE ] AIO: Adding firewall rules... [ DONE ] Configuring oVirt-engine... [ DONE ] Configuring JVM... [ DONE ] Creating CA... [ ERROR ] Failed to create certificate authority Certificate is to be certified until Dec 18 15:29:35 2022 GMT (3650 days) Write out database with 1 new entries Data Base Updated Certificate was added to keystore Generating a 2048 bit RSA private key ............................+++ ............................................................+++ writing new private key to '/tmp/engine.12002.key' ----- ./SignReq.sh: line 86: /var/lock/ovirt-engine/.openssl.exclusivelock: No such file or directory file 'certs/engine.cer' does not exist! 2012-12-20 16:29:36::DEBUG::common_utils::464::root:: retcode = 1 2012-12-20 16:29:36::ERROR::engine-setup::851::root:: Traceback (most recent call last): File "/usr/bin/engine-setup", line 777, in _createCA out, rc = utils.execCmd(cmdList=cmd, failOnError=True, msg=output_messages.ERR_RC_CODE, maskList=[basedefs.CONST_CA_PASS]) File "/usr/share/ovirt-engine/scripts/common_utils.py", line 467, in execCmd raise Exception(msg) Exception: Return Code is not zero

2 2

[Users] COrrection on oVirt web page
by Gianluca Cecchi 20 Dec '12

20 Dec '12

Hello, at page http://wiki.ovirt.org/Troubleshooting_NFS_Storage_Issues the command showmounts should actually be showmount What would be preferred way of communicating these kind of things? Correct the mailing list or not? Gianluca

3 3

[Users] Problems when trying to delete a snapshot
by Ricky Schneberger 20 Dec '12

20 Dec '12

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I was trying to delete a snapshot from one of my VM and everything started fine. The disk image is a thin provisioned 100GB disk with 8GB data. I just hade one snapshot and it was that one I started to delete. After more than two hours I look in the folder with that VMs disk images and found out that there was i new created file with a size of around 650GB and it was still growing. - -rw-rw----. 1 vdsm kvm 8789950464 14 dec 12.23 8ede8e53-1323-442b-84f2-3c94114c64cf - -rw-r--r--. 1 vdsm kvm 681499951104 14 dec 14.10 8ede8e53-1323-442b-84f2-3c94114c64cf_MERGE - -rw-r--r--. 1 vdsm kvm 272 14 dec 12.24 8ede8e53-1323-442b-84f2-3c94114c64cf.meta - -rw-rw----. 1 vdsm kvm 107382439936 6 jun 2012 b4a43421-728b-4204-a389-607221d945b7 - -rw-r--r--. 1 vdsm kvm 282 14 dec 12.24 b4a43421-728b-4204-a389-607221d945b7.meta Any idea what is happening? Regards - -- Ricky -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with undefined - http://www.enigmail.net/ iEYEARECAAYFAlDLJsoACgkQOap81biMC2Nu+ACfTnCbl9BqIvQmp0zO4pYxlNDv qw4AoIZAR2Zg2RQNKOYf4YEVOSqVQZIV =MUYs -----END PGP SIGNATURE-----

2 2

[Users] Adding iscsi/fcp storage with rest api
by Mohua Li 20 Dec '12

20 Dec '12

--9jxsPFA5p3P2qPhR Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Hi, I'm trying to add fcp/iscsi storage with rest api like below,=20 #iscsi(iscsi hba card) 743 # type_: storage type 744 storage_params =3D param.Storage(address=3D"10.66.90.= 100",=B7 745 port=3D"3260",=B7 id=3D"36090a038d0f731= 6a6807a568b2491f1d", target=3D"iqn.2001-05= =2Ecom.equallogic:0-8a0906-6a31f7d03-1d1f49b268a50768" 746 type_=3D"iscsi") 747 # type_: storagedomain type 748 storagedomain_params =3D param.StorageDomain(name=3D"= iscsidomain", 749 data_cente= r=3Ddc, host=3Dhost, 750 type_=3D"d= ata", storage_format=3D"v3", 751 storage=3D= storage_params) 752 try: 753 logging.info("Creating iscsi data storage %s" % na= me) 754 storagedomain =3D self.api.storagedomains.add(stor= agedomain_params) storage params for fcp storage: 744 storage_params =3D param.Storage(id=3D"3600a0b80005ad= b0b00004d834f0b7954", 746 type_=3D"fcp") my question are: * if this is enough to connect iscsi/fcp(lun id, target) storage? * did wrong type the logical_unit element,=20 thanks for your help again. Regards, --9jxsPFA5p3P2qPhR Content-Type: application/pgp-signature; name="signature.asc" Content-Description: Digital signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQEcBAEBAgAGBQJQ0r+oAAoJEKa5n96c5rR6YYwH/2m+Ub+3AOvvIFl3HvE9F5uE u3uay1cFHHI5NxYjiA6RZ0+UqmvQnqXNRP5ILoau5670PLOI63rJiInBseR1pZTN VlM3gy2zy0yFa8EkSQIoCtoAuQJqO3Oa5wcqOsl6q92o23OgooScDQ9vaCCv6o1p ZLJl3YQ0eBc/yJJ0Sim+qz2adFwnutW+6DhuOBkZ+FWLlle5kIwvNltWbL3cNCOa II261zTEh5sXSjbLEO+9r6lZbZxN0CVTd63c38rC4nwC5242hn2QkFCzJdRR0zd/ l976DfK445SgcJ4lmE8WQaiI3VjeqbO+X0NlxV5kyAAu5om4XVO3GTh+0E/u36o= =LVDZ -----END PGP SIGNATURE----- --9jxsPFA5p3P2qPhR--

2 2

[Users] Adding Nodes after ovirt-engine re-install
by Alex Leonhardt 20 Dec '12

20 Dec '12

Hi, I was wondering if it's possible to add existing ovirt nodes (HVs) to a new installed ovirt-engine ? E.g. the old engine died and there was no backup of it - how would you add the existing HVs without destroying what's already running ? If the above is not possible, is there a "backup guide" you can refer me to ? Ideally though, it should really be possible to "import" existing HVs into a newly setup ovirt-engine. Alex

2 1

[Users] Package from CentOs 6.3
by Marcelo Barbosa 20 Dec '12

20 Dec '12

Hi guys, I woud like to know where can I download nome-pacote rpm for Centos. Does anybody can help me? Thanks Marcelo Barbosa +55 51 8414 6309 *mr.marcelo.barbosa(a)gmail.com*

1 1

[Users] v2v vmware conversion
by Alex Leonhardt 20 Dec '12

20 Dec '12

Hi, I've seen several posts out there on how to convirt hosts from VMware -> Ovirt/KVM - Am I right to assume that just like the command for RHEV, the equivalent for Ovirt would be : virt-v2v -ic esx://$IP$/?no_verify=1 -o rhev -osd $HV$:/vol/exportdomain --network ovirtmgmt $VMNAME$ Also, I read a post that refers to a ovirt profile for v2v - I've never had to convert any VMs from VMWare so was wondering if that is just a custom config or whether there is a general v2v profile that can be used to convert to ovirt ? Alex

2 1

[Users] Report size of thin provisioned disk
by Jeff Bailey 20 Dec '12

20 Dec '12

With 3.2 alpha, on the disks subtab of the virtual machines tab I'm seeing the correct "virtual size" for the disk but the "actual size" remains 1GB even though the drive has grown to 11GB (according to lvs output). It doesn't seem to be causing any problems. The auto-growth (from my perspective) is working much smoother than it did a release ago :) I just wondered if anyone else had noticed this. Thanks, Jeff

2 1

[Users] AIO f18 nightly local storage active only in permissive mode
by Gianluca Cecchi 20 Dec '12

20 Dec '12

Hello, Fedora 18 with all-in-one config and nightly build repo at this level: ovirt-engine-3.2.0-1.20121217.git1e01c00.fc18.noarch When I try to activate local domain I view it remains in "contending" and then fails. I try 2-3 times. [g.cecchi@f18aio ~]$ getenforce Enforcing As soon as I set setenforce 0 [g.cecchi@f18aio ~]$ getenforce Permissive And I try to activate again, it works and my local_host results correctly up. Is this something already fixed in next nightly or should I send my logs? Is it supposed to be a supported config with SELinux in Enforcing or not (I'm referring to the problem of tuned too..)? Thanks Gianluca

1 0

Re: [Users] rhevm-cli - add nfs data storage
by Michael Pasternak 20 Dec '12

20 Dec '12

Hi Meni, When you pass --datacenter-identifier, you attaching existent SD to the data-center, note, you can see what parameters use for any command/action just running 'help' command: [oVirt shell (connected)]# help add storagedomain USAGE add <type> [base identifiers] [attribute options] DESCRIPTION Creates a new object or adds existent with type storagedomain. See 'help add' for generic help on creating objects. ATTRIBUTE OPTIONS The following options are available for objects with type storagedomain: Overload 1: * --host-id|name: string * --type: string * --storage-type: string * --format: boolean * --storage-address: string * --storage-logical_unit: collection { logical_unit.address: string logical_unit.port: int logical_unit.target: string logical_unit.username: string logical_unit.password: string logical_unit.serial: string logical_unit.vendor_id: string logical_unit.product_id: string logical_unit.lun_mapping: int logical_unit.portal: string logical_unit.paths: int logical_unit.id: string } * [--name: string] * [--storage-override_luns: boolean] Overload 2: * --host-id|name: string * --type: string * --storage-type: string * --format: boolean * --storage-address: string * --storage-path: string * [--name: string] Overload 3: * --host-id|name: string * --type: string * --storage-type: string * --format: boolean * --storage-path: string * [--name: string] Overload 4: * --host-id|name: string * --type: string * --storage-type: string * --format: boolean * --storage-path: string * --storage-vfs_type: string * [--name: string] * [--storage-address: string] * [--storage-mount_options: string] * [--expect: 201-created] * [--correlation_id: anystring] .... On 12/19/2012 11:56 AM, Meni Yakove wrote: > Hi, > > I'm trying to add new NFS data storage to my setup using CLI and it fail: > > [RHEVM shell (connected)]# add storagedomain --name CLI_DataStorage --host-name orchid-vds1 --type data --storage-type nfs --format v3 --storage-address > orion.qa.lab.tlv.redhat.com --storage-path /export/meni/dc31-cli --datacenter-identifier DC31-CLI > > error: > status: 400 > reason: Bad Request > detail: Entity not found: Storage: name=CLI_DataStorage > > On the user guide: > > *Create NFS data storage* > > An NFS data storage domain is an exported NFS share attached to a data center. It provides storage for virtual machines. Add the NFS share as a data storage domain with > the |add storagedomain| command. > > [RHEVM shell (connected)]# add storagedomain --name DataStorage --host-name MyHost --type data --storage-type nfs --format v1 --storage-address! > 192.168.0 > .10 --storage-path /exports/data --datacenter-indentifier Default > > > And: > > > Example 5.13. Creating a new storage domain > > [RHEVM shell (connected)]# add storagedomain --name DataStorage --datacenter-name Default -type data > > > I have tried both but still the same error. what I'm doing wrong? > > Thanks > Meni > -- Michael Pasternak RedHat, ENG-Virtualization R&D

1 0