- Users - oVirt List Archives

Importing Storage Domain's Export from one Data Center to Another Data Center
by calebmibaker＠outlook.com 09 Oct '24

09 Oct '24

Is it possible to perform disaster recovery importing a Storage Domain's Export from one Data Center to another in a manually fashion without Ansible? I'm trying to import Data Center 1's Storage Domain Export by cloning the storage domain export and importing it into Data Center 2's environment through IP address & NFS name within the oVirt's web portal. However, I receive this error message: there is no storage domain under the specified path. Below is what I have done to tried to troubleshoot the issue. After looking into the documentation, I haven't seen information for this method. Should I consider another option? Is there a preferred way of testing DR within an environment? Thank you. -I have detach both of the export storage domains from both data centers before importing the cloned export. -Changing import settings -I have adjusted the metadata information within the cloned export after mounting it and reviewing the logs.

1 0

iSCSI Storage Issue - move Hosts!?
by steve-pa＠hotmail.com 09 Oct '24

09 Oct '24

Hello everyone, I am currently trying to set up my VM environment again. Status now: Host1 + iSCSI storage connection Plan: Host2 + same iSCSI storage as above Now i want to move all VMs to Host2, Host2 is already included and I can start all VMs on Host2. Problem: Storage -> Manage Domain: Host1 is connected to the storage here. I have no possibility to switch to Host2. What happens if I now put Host1 into maintenance mode or delete it completely? Will all my systems then crash because the storage connection has been lost?

2 1

Connect to hypervisor node with Virt-Manager
by luc.lalonde＠polymtl.ca 09 Oct '24

09 Oct '24

Hello, I can connect directly to one of my hypervisor node using Virt-manager with this auth: Login: vdsm@ovirt Password: shibboleth I then get a listing of the machines on the node. However, if I try to open the VM console, I'm prompted for another password... I have no idea what password to use. Any ideas? Thanks.

1 0

Error oVirt Installation from Official Sources
by p.olivera＠telfy.com 09 Oct '24

09 Oct '24

Hello oVirt Community, We are encountering the following error during a new installation of the oVirt Hosted Engine from the official sources: https://resources.ovirt.org/pub/ovirt-4.5/iso/ovirt-node-ng-installer/4.5.5… (ovirt-node-ng-installer-4.5.5-2023113015.el9.iso) 2024-10-03 13:26:41,335+0200 ERROR otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:113 fatal: [localhost -> 192.168.1.47]: FAILED! => {"changed": false, "msg": "Failed to download metadata for repo 'centos-ceph-pacific': Cannot prepare internal mirrorlist: Curl error (6): Couldn't resolve host name for http://mirrorlist.centos.org/?release=8-stream&arch=x86_64&repo=storage-cep… [Could not resolve host: mirrorlist.centos.org]", "rc": 1,"results":[]} Any guidance or suggestions on how to resolve this issue would be greatly appreciated. Thank you! Pablo O.

2 1

Migrate Ovirt Node from el8 to el9
by devis＠gmx.com 04 Oct '24

04 Oct '24

Hello, I tried to find a guide or procedure to upgrade an ovirt node from el8 to el9, but I didn't find anything. Is it possible migrate node without reinstallation? Thanks, Devis

3 2

Installing on iSCSI boot node
by rtartar＠gmail.com 30 Sep '24

30 Sep '24

I've installed the oVirt node on iSCSI boot server (Cisco UCS chassis) But when I go to add to the manager it fails and the Node loses contact with it's ibft interface. Anyway I can leave the interface alone when adding to the manager? I have 5 physical interfaces attached to the node. Any help would be greatly appreciated. Using the node 4.5 installer. I add the ip=ibft to the installation startup and seems to work mostly... Thanks in advance

2 1

Re: [External] : Error during hosted-engine deploy for Cluster Compatibility Version
by devis＠gmx.com 30 Sep '24

30 Sep '24

Hello Marcos, I followed the guide and the suggestions provided by Ovirt Documentation. I didn't do any customisations, and it is a clean installation. How I can solve this? It seems there is a problem in normal installation process. Can you support? Thanks, Devis

1 0

Error during hosted-engine deploy for Cluster Compatibility Version
by devis＠gmx.com 30 Sep '24

30 Sep '24

Hi, I followed guide to install the oVirt Engine. I also used the suggestion to use oVirt master snapshot repositories. But during the installation I obtain the following error: "The host has been set in non_operational status, deployment errors: code 154: Host ********* is compatible with versions (4.2,4.3,4.4,4.5,4.6,4.7) and cannot join Cluster Default which is set to version 4.8., code 9000: Failed to verify Power Management configuration for Host *******., fix accordingly and re-deploy."} How I can solve this problem? I cannot find any suggestion on internet.

2 1

oVirt Node 4.5.5 no virtualization tab
by arkansascontrols＠icloud.com 26 Sep '24

26 Sep '24

I have installed 4.5.5 and can get to the Web Interface at :9090 on all 3. I have been able to add the SSH keys and from any of the 3 hosts web interface I can get to the others from the drop down. But there is no Virtualization Tab on any of the 3, so no way to create VM's. I have followed a few instructions from some threads I've found on here https://www.ovirt.org/dropped/gluster-hyperconverged/chap-Deploying_Hyperco… I subscribed all 3 hosts to the repo, and installed the engine, but the cockpit-ovirt-dashboard doesn't exist to install, and I'm guessing that's where I will find what I need to make this usable. Any help would be appreciated.

3 6

Installation issue
by dave nirav 25 Sep '24

25 Sep '24

Hi, Probably this is my first mail to this list. I am facing lot of dependency issue while installing ovirt-engine, moreover on getting openstack, ceph and ansible. I have specified the repo paths in /etc/yum.repo.d/<>, it seems openstack path show EoL and I am unable to install its dependent packages. I am working on limited env with customization over RHEL9 though I am not having any RHSM support. I am installing things 1 by 1 and would like to get help on the installation steps and list of rpms needed to do engine-setup. Any help will be appreciated. dnf install ovirt-engine Last metadata expiration check: 1:41:11 ago on Wed Sep 25 11:35:58 2024. Error: Problem: cannot install the best candidate for the job - nothing provides openstack-java-resteasy-connector >= 3.2.9 needed by ovirt-engine-4.4.10.7-1.el8.noarch from ovirt-4.4 - nothing provides ansible-runner-service >= 1.0.6 needed by ovirt-engine-4.4.10.7-1.el8.noarch from ovirt-4.4 - nothing provides collectd-write_syslog needed by ovirt-engine-4.4.10.7-1.el8.noarch from ovirt-4.4 - nothing provides xmlrpc-client needed by ovirt-engine-4.4.10.7-1.el8.noarch from ovirt-4.4 - nothing provides ceph-common needed by ovirt-engine-4.4.10.7-1.el8.noarch from ovirt-4.4 - nothing provides python3-cinderlib needed by ovirt-engine-4.4.10.7-1.el8.noarch from ovirt-4.4 - nothing provides ansible < 2.10.0 needed by ovirt-engine-4.4.10.7-1.el8.noarch from ovirt-4.4 (try to add '--skip-broken' to skip uninstallable packages or '--nobest' to use not only best candidate packages) Thanks, Nirav Dave

1 0

Migrating Self Hosted Engine from el8s to Standalone Hosted Engine using el9
by Nur Imam Febrianto 25 Sep '24

25 Sep '24

Hi. Currently we're using oVirt 4.5 that still based on el8s (Both host end the engine), because CentOS 8 Stream had been EOL'ed we want to migrate the engine using Standalone Engine (not the self hosted) and uses any el9 capable OS. What is the proper way to do it ? And after the migration what will happened to storage domain that used by the Self Hosted Engine in el8 ? Maybe anybody here can give me some good advise. 🙂 Thanks before. Regards, Nur Imam Febrianto

1 0

API to Query OVA files from the hosts/ mounted locations
by Siddu Hadpad 24 Sep '24

24 Sep '24

We are storing images in an NFS share that will be mounted to KVM hosts. When I attempt to provision a VM using the mounted path, it successfully provisions the VM from the OVA files. However, if an incorrect path is provided, it results in an 'Operation Failed' error. The error message is not so descriptive. To prevent this issue, I'd like to validate if the OVA file already exists in the specified path. Unfortunately, I haven't been able to find any APIs to query images directly from mounted locations on the host. While the web UI does display an error if an incorrect path is provided, I'm wondering if there are any APIs available to validate the presence of the OVA file in the specific path.

2 1

Re: Abnormal behavior on the reinstalled host
by 寺一彰人 24 Sep '24

24 Sep '24

Hi Recardo I have the same problem "Cannot activate Host. Host has no unique id." Can you tell me if this issue is resolved ?

1 0

Re: Abnormal behavior on the reinstalled host
by 寺一彰人 24 Sep '24

24 Sep '24

Hi Recardo I have the same problem "Cannot activate Host. Host has no unique id." Can you tell me if this issue is resolved ?

1 0

Add HE disks hosted-engine deploy ovirtsdk4-service.py errors
by airawan＠certa.id 22 Sep '24

22 Sep '24

Dear all, currently i have lab environment which use 3 node server in rocky linux9.4 perform as hypervisor node, since EL-9 cockpit-ovirt-dashboard doesn't appears in EL-9 packages we use CLI glusterfs cluster replication and hosted engine setup. hosted engine deploy command i've use = hosted-engine --deploy --4 task executed = [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Add HE disks] error highlight = [ ERROR ] {'exception': 'Traceback (most recent call last):\n File "/tmp/ansible_ovirt_disk_payload_691q2jk2/ansible_ovirt_disk_payload.zip/ansible_collections/ovirt/ovirt/plugins/modules/ovirt_disk.py", line 883, in main\n File "/tmp/ansible_ovirt_disk_payload_691q2jk2/ansible_ovirt_disk_payload.zip/ansible_collections/ovirt/ovirt/plugins/module_utils/ovirt.py", line 672, in create\n entity = self._service.add(\n File "/usr/lib64/python3.9/site-packages/ovirtsdk4/services.py", line 7825, in add\n return self._internal_add(disk, headers, query, wait)\n File "/usr/lib64/python3.9/site-packages/ovirtsdk4/service.py", line 232, in _internal_add\n return future.wait() if wait else future\n File "/usr/lib64/python3.9/site-packages/ovirtsdk4/service.py", line 55, in wait\n return self._code(response)\n File "/usr/lib64/python3.9/site-packages/ovirtsdk4/service.py", line 229, in callback\n self._check_fault(response)\n File "/usr/lib64/python3.9/site-packages/ovirtsdk4 /service.py", line 132, in _check_fault\n self._raise_error(response, body)\n File "/usr/lib64/python3.9/site-packages/ovirtsdk4/service.py", line 118, in _raise_error\n raise error\novirtsdk4.Error: Fault reason is "Operation Failed". Fault detail is "[]". HTTP response code is 400.\n', 'failed': True, 'msg': 'Fault reason is "Operation Failed". Fault detail is "[]". HTTP response code is 400.', 'invocation': {'module_args': {'name': 'he_virtio_disk', 'size': '51GiB', 'format': 'raw', 'sparse': True, 'description': 'Hosted-Engine disk', 'content_type': 'hosted_engine', 'interface': 'virtio', 'storage_domain': 'hosted_storage', 'wait': True, 'timeout': 600, 'auth': {'token': any suggestions i really appreciate thank you..

2 1

Assistance Needed with oVirt Engine Deployment 4.5 Error
by weichao.jiao＠rayseconsult.com 22 Sep '24

22 Sep '24

Dear friends: I am encountering an issue while attempting to deploy the oVirt Engine 4.5 on my local engine VM and I'm seeking guidance on how to resolve this. Here's a summary of the error message I received during the deployment process: [ INFO ] TASK [ovirt.ovirt.engine_setup : Install oVirt Engine package] [ ERROR ] fatal: [localhost -> 192.168.222.27]: FAILED! => {"changed": false, "msg": "Failed to download metadata for repo 'centos-ceph-pacific': Cannot download repomd.xml: Cannot download repodata/repomd.xml: All mirrors were tried", "rc": 1, "results": []} [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Sync on engine machine] [ INFO ] changed: [localhost -> 192.168.222.27] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set destination directory path] [ INFO ] ok: [localhost -> localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Create destination directory] [ INFO ] changed: [localhost -> localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Find the local appliance image] [ INFO ] ok: [localhost -> localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set local_vm_disk_path] [ INFO ] ok: [localhost -> localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Give the vm time to flush dirty buffers] [ INFO ] ok: [localhost -> localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Copy engine logs] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Change ownership of copied engine logs] [ INFO ] changed: [localhost -> localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Notify the user about a failure] [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "There was a failure deploying the engine on the local engine VM. The system may not be provisioned according to the playbook results: please check the logs for the issue, fix accordingly or re-deploy from scratch.\n"} I would appreciate any advice or suggestions on how to proceed with troubleshooting or resolving this error. If there are any specific logs or information you need to assist me, please let me know. Thank you in advance for your help. Best regards

3 3

Error during SSO authentication: access_denied: Cannot authenticate user '
by Siddu Hadpad 18 Sep '24

18 Sep '24

I'm using ovirt-engine-sdk-ruby but getting an SSE authentication error. Facing authenticate issue after my mac update(14.6.1 Sonoma) /gems/ruby-3.0.0/gems/ovirt-engine-sdk-4.6.0/lib/ovirtsdk4/connection.rb:476:in `create_access_token': Error during SSO authentication: access_denied: Cannot authenticate user 'svcauto(a)domain.com': Unable to log in. Verify your login information or contact the system administrator.. (OvirtSDK4::AuthError) from /Users/077503/.rvm/gems/ruby-3.0.0/gems/ovirt-engine-sdk-4.6.0/lib/ovirtsdk4/connection.rb:646:in `internal_send' from /Users/077503/.rvm/gems/ruby-3.0.0/gems/ovirt-engine-sdk-4.6.0/lib/ovirtsdk4/connection.rb:202:in `block in send' from /Users/077503/.rvm/gems/ruby-3.0.0/gems/ovirt-engine-sdk-4.6.0/lib/ovirtsdk4/connection.rb:202:in `synchronize' from /Users/077503/.rvm/gems/ruby-3.0.0/gems/ovirt-engine-sdk-4.6.0/lib/ovirtsdk4/connection.rb:202:in `send' from /Users/077503/repos/gems/olam/lib/olam/utils/monkey_patch.rb:202:in `internal_get' Here is the code : connection = OvirtSDK4::Connection.new( url: 'https://xxxx/ovirt-engine/api', username: 'svcauto(a)domain.com', password: 'xxxx', insecure: true, debug: true ) vms_service = connection.system_service.vms_service vms = vms_service.list

1 0

New oVirt Node Installation, no web console access
by arkansascontrols＠icloud.com 17 Sep '24

17 Sep '24

I am setting a lab with a 3 nodes. I downloaded the latest oVirt node iso (4.5) and completed the install on all 3 nodes. When I browse to the node address I get a login screen that will not accept the root password. During the setup there is no opportunity that I have found to enter additional users, only an option to set the root password. How do I access the Web Console? Any help would be appreciated.

2 2

HA Broker corrupting iSCSI Lockspace
by mblecha＠techmerx.com 14 Sep '24

14 Sep '24

I'm not sure how it happened, but a few hours ago, the lockspace for the hosted engine became corrupted. sanlock reports a -223 error. CentOS 8 Stream, Ceph iSCSI backend (Reef at 18.2.4) using tcmu-runner. I managed to format the lockspace, after shutting down the HA Agents and Brokers on all HA Engine nodes, but as soon as I start up the HA Agent on any node, the lockspace becomes corrupted again, and sanlock starts returning the -223 error message again. I see no relevant other errors in what I can find so far. Any suggestions on where to investigate next? I have an entire cluster than cannot start/stop/migrate VMS as the entire DataCenter is marked Non Operational.

1 0

Error during setup
by Alexey Martynov 13 Sep '24

13 Sep '24

Hello During installation level setup ipv4 saw error [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Hosted Engine deployment failed Log file is located at /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20240910010101-ldtwqb.log They are last lines in log 2024-09-10 01:02:54,694+0300 DEBUG otopi.context context.dumpEnvironment:771 ENV SYSTEM/rebootDeferTime=int:'10' 2024-09-10 01:02:54,694+0300 DEBUG otopi.context context.dumpEnvironment:779 ENVIRONMENT DUMP - END 2024-09-10 01:02:54,694+0300 DEBUG otopi.context context._executeMethod:124 Stage pre-terminate METHOD otopi.plugins.otopi.dialog.cli.Plugin._pre_terminate 2024-09-10 01:02:54,695+0300 DEBUG otopi.context context._executeMethod:134 otopi.plugins.otopi.dialog.cli.Plugin._pre_terminate condition False 2024-09-10 01:02:54,695+0300 INFO otopi.context context.runSequence:614 Stage: Termination 2024-09-10 01:02:54,695+0300 DEBUG otopi.context context.runSequence:619 STAGE terminate 2024-09-10 01:02:54,696+0300 DEBUG otopi.context context._executeMethod:124 Stage terminate METHOD otopi.plugins.gr_he_common.core.misc.Plugin._terminate 2024-09-10 01:02:54,696+0300 ERROR otopi.plugins.gr_he_common.core.misc misc._terminate:164 Hosted Engine deployment failed 2024-09-10 01:02:54,696+0300 DEBUG otopi.plugins.otopi.dialog.human dialog.__logString:204 DIALOG:SEND Log file is located at /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20240910010101-ldtwqb.log 2024-09-10 01:02:54,697+0300 DEBUG otopi.context context._executeMethod:124 Stage terminate METHOD otopi.plugins.otopi.dialog.human.Plugin._terminate 2024-09-10 01:02:54,992+0300 DEBUG otopi.context context._executeMethod:124 Stage terminate METHOD otopi.plugins.otopi.dialog.machine.Plugin._terminate 2024-09-10 01:02:54,992+0300 DEBUG otopi.context context._executeMethod:134 otopi.plugins.otopi.dialog.machine.Plugin._terminate condition False 2024-09-10 01:02:54,992+0300 DEBUG otopi.context context._executeMethod:124 Stage terminate METHOD otopi.plugins.otopi.core.log.Plugin._terminate How can resole it?

2 1

Moving hosted engine to iscsi storage domain
by Devin A. Bougie 13 Sep '24

13 Sep '24

Hello, We are attempting to move a hosted engine from an NFS to an iSCSI storage domain, following the normal backup / restore procedure. With a little intervention in the new hosted engine VM, everything seems to be working with the new engine and the process gets to the point of trying to create the new iSCSI hosted_storage domain. At this point, it fails with "Storage domain cannot be reached. Please ensure it is accessible from the host(s).” The host itself does see the storage, and everything looks fine using iscsiadm and multipath commands. However, if I look at the new hosted_storage domain in the new engine, it’s stuck “unattached” and the “hosted-engine --deploy --restore-from-file …” command loops at the "Please specify the storage you would like to use” step. Please see below for an excerpt of the output and logs, and let me know what additional information I can provide. Many thanks, Devin Here’s the output from the “hosted-engine --deploy --restore-from-file …” command. ——— [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : iSCSI login] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get iSCSI LUNs] [ INFO ] ok: [localhost] The following luns have been found on the requested target: [1] mpathm 1024.0GiB IFT DS 3000 Series status: free, paths: 8 active Please select the destination LUN (1) [1]: [ INFO ] iSCSI discard after delete is disabled [ INFO ] Creating Storage Domain [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Execute just a specific set of steps] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Force facts gathering] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Wait for the storage interface to be up] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check local VM dir stat] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Enforce local VM dir existence] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Obtain SSO token using username/password credentials] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fetch host facts] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fetch cluster ID] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fetch cluster facts] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fetch Datacenter facts] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fetch Datacenter ID] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fetch Datacenter name] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fetch cluster name] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Fetch cluster version] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Enforce cluster major version] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Enforce cluster minor version] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Set storage_format] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Add NFS storage domain] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Add glusterfs storage domain] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Add iSCSI storage domain] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Add Fibre Channel storage domain] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get storage domain details] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Find the appliance OVF] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get ovf data] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get disk size from ovf data] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Get required size] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Remove unsuitable storage domain] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Check storage domain free space] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.ovirt.hosted_engine_setup : Activate storage domain] [ ERROR ] ovirtsdk4.Error: Fault reason is "Operation Failed". Fault detail is "[Storage domain cannot be reached. Please ensure it is accessible from the host(s).]". HTTP response code is 400. [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "Fault reason is \"Operation Failed\". Fault detail is \"[Storage domain cannot be reached. Please ensure it is accessible from the host(s).]\". HTTP response code is 400.”} ——— Here’s an excerpt from the "ovirt-hosted-engine-setup-ansible-create_storage_domain-20240911081524-c7yrkf.log”: ——— 2024-09-11 08:16:12,354-0400 INFO ansible task start {'status': 'OK', 'ansible_type': 'task', 'ansible_playbook': '/usr/share/ovirt-hosted-engine-setup/he_ansible/trigger_role.yml', 'ansible_task': 'ovirt.ovirt.hosted_engine_setup : Activate storage domain'} 2024-09-11 08:16:12,354-0400 DEBUG ansible on_any args TASK: ovirt.ovirt.hosted_engine_setup : Activate storage domain kwargs is_conditional:False 2024-09-11 08:16:12,355-0400 DEBUG ansible on_any args localhost TASK: ovirt.ovirt.hosted_engine_setup : Activate storage domain kwargs 2024-09-11 08:16:25,550-0400 DEBUG var changed: host "localhost" var "ansible_play_hosts" type "<class 'list'>" value: "[]" 2024-09-11 08:16:25,551-0400 DEBUG var changed: host "localhost" var "ansible_play_batch" type "<class 'list'>" value: "[]" 2024-09-11 08:16:25,551-0400 DEBUG var changed: host "localhost" var "play_hosts" type "<class 'list'>" value: "[]" 2024-09-11 08:16:25,551-0400 ERROR ansible failed { "ansible_host": "localhost", "ansible_playbook": "/usr/share/ovirt-hosted-engine-setup/he_ansible/trigger_role.yml", "ansible_result": { "_ansible_no_log": false, "changed": false, "exception": "Traceback (most recent call last):\n File \"/tmp/ansible_ovirt_storage_domain_payload_cne75az3/ansible_ovirt_storage_domain_payload.zip/ansible_collections/ovirt/ovirt/plugins/modules/ovirt_storage_domain.py\", line 811, in main\n File \"/tmp/ansible_ovirt_storage_domain_payload_cne75az3/ansible_ovirt_storage_domain_payload.zip/ansible_collections/ovirt/ovirt/plugins/modules/ovirt_storage_domain.py\", line 660, in post_create_check\n File \"/usr/lib64/python3.9/site-packages/ovirtsdk4/services.py\", line 3647, in add\n return self._internal_add(storage_domain, headers, query, wait)\n File \"/usr/lib64/python3.9/site-packages/ovirtsdk4/service.py\", line 232, in _internal_add\n return future.wait() if wait else future\n File \"/usr/lib64/python3.9/site-packages/ovirtsdk4/service.py\", line 55, in wait\n return self._code(response)\n File \"/usr/lib64/python3.9/site-packages/ovirtsdk4/service.py\", line 229, in callback\n self._check_fault(response)\n File \"/usr/lib64/python3.9/site-packages/ovirtsdk4/service.py\", line 132, in _check_fault\n self._raise_error(response, body)\n File \"/usr/lib64/python3.9/site-packages/ovirtsdk4/service.py\", line 118, in _raise_error\n raise error\novirtsdk4.Error: Fault reason is \"Operation Failed\". Fault detail is \"[Storage domain cannot be reached. Please ensure it is accessible from the host(s).]\". HTTP response code is 400.\n", "invocation": { "module_args": { "backup": null, "comment": null, "critical_space_action_blocker": null, "data_center": "Default", "description": null, "destroy": null, "discard_after_delete": null, "domain_function": "data", "fcp": null, "fetch_nested": false, "format": null, "glusterfs": null, "host": "lnxvirt01-p55.classe.cornell.edu", "id": null, "iscsi": null, "localfs": null, "managed_block_storage": null, "name": "hosted_storage", "nested_attributes": [], "nfs": null, "poll_interval": 3, "posixfs": null, "state": "present", "storage_format": null, "timeout": 180, "wait": true, "warning_low_space": null, "wipe_after_delete": null } }, "msg": "Fault reason is \"Operation Failed\". Fault detail is \"[Storage domain cannot be reached. Please ensure it is accessible from the host(s).]\". HTTP response code is 400." }, "ansible_task": "Activate storage domain", "ansible_type": "task", "status": "FAILED", "task_duration": 13 } 2024-09-11 08:16:25,551-0400 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7fac823de1f0> kwargs ignore_errors:None 2024-09-11 08:16:25,552-0400 INFO ansible stats { "ansible_playbook": "/usr/share/ovirt-hosted-engine-setup/he_ansible/trigger_role.yml", "ansible_playbook_duration": "00:59 Minutes", "ansible_result": "type: <class 'dict'>\nstr: {'localhost': {'ok': 20, 'failures': 1, 'unreachable': 0, 'changed': 1, 'skipped': 9, 'rescued': 0, 'ignored': 0}}", "ansible_type": "finish", "status": "FAILED" } 2024-09-11 08:16:25,552-0400 INFO SUMMARY: Duration Task Name -------- -------- [ < 1 sec ] Execute just a specific set of steps [ 00:03 ] Force facts gathering [ 00:01 ] Check local VM dir stat [ 00:01 ] Obtain SSO token using username/password credentials [ 00:01 ] Fetch host facts [ < 1 sec ] Fetch cluster ID [ 00:01 ] Fetch cluster facts [ 00:01 ] Fetch Datacenter facts [ < 1 sec ] Fetch Datacenter ID [ < 1 sec ] Fetch Datacenter name [ < 1 sec ] Fetch cluster name [ < 1 sec ] Fetch cluster version [ < 1 sec ] Set storage_format [ 00:15 ] Add iSCSI storage domain [ 00:01 ] Get storage domain details [ 00:01 ] Find the appliance OVF [ 00:01 ] Get ovf data [ < 1 sec ] Get disk size from ovf data [ < 1 sec ] Get required size [ FAILED ] Activate storage domain 2024-09-11 08:16:25,553-0400 DEBUG ansible on_any args <ansible.executor.stats.AggregateStats object at 0x7fac83c8a700> kwargs ——— And here’s from the "ovirt-hosted-engine-setup-20240910222757-5ru4mo.log”: ——— 2024-09-11 08:16:12,144-0400 INFO otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:115 TASK [ovirt.ovirt.hosted_engine_setup : Activate storage domain] 2024-09-11 08:16:25,264-0400 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:109 {'exception': 'Traceback (most recent call last):\n File "/tmp/ansible_ovirt_storage_domain_payload_cne75az3/ansible_ovirt_storage_domain_payload.zip/ansible_collections/ovirt/ovirt/plugins/modules/ovirt_storage_domain.py", line 811, in main\n File "/tmp/ansible_ovirt_storage_domain_payload_cne75az3/ansible_ovirt_storage_domain_payload.zip/ansible_collections/ovirt/ovirt/plugins/modules/ovirt_storage_domain.py", line 660, in post_create_check\n File "/usr/lib64/python3.9/site-packages/ovirtsdk4/services.py", line 3647, in add\n return self._internal_add(storage_domain, headers, query, wait)\n File "/usr/lib64/python3.9/site-packages/ovirtsdk4/service.py", line 232, in _internal_add\n return future.wait() if wait else future\n File "/usr/lib64/python3.9/site-packages/ovirtsdk4/service.py", line 55, in wait\n return self._code(response)\n File "/usr/lib64/python3.9/site-packages/ovirtsdk4/service.py", line 229, in callback\n self._check_fault(response)\n File "/usr/lib64/python3.9/site-packages/ovirtsdk4/service.py", line 132, in _check_fault\n self._raise_error(response, body)\n File "/usr/lib64/python3.9/site-packages/ovirtsdk4/service.py", line 118, in _raise_error\n raise error\novirtsdk4.Error: Fault reason is "Operation Failed". Fault detail is "[Storage domain cannot be reached. Please ensure it is accessible from the host(s).]". HTTP response code is 400.\n', 'msg': 'Fault reason is "Operation Failed". Fault detail is "[Storage domain cannot be reached. Please ensure it is accessible from the host(s).]". HTTP response code is 400.', 'invocation': {'module_args': {'host': 'lnxvirt01-p55.classe.cornell.edu', 'data_center': 'Default', 'name': 'hosted_storage', 'wait': True, 'state': 'present', 'timeout': 180, 'poll_interval': 3, 'fetch_nested': False, 'nested_attributes': [], 'domain_function': 'data', 'id': None, 'description': None, 'comment': None, 'localfs': None, 'nfs': None, 'iscsi': None, 'managed_block_storage': None, 'posixfs': None, 'glusterfs': None, 'fcp': None, 'wipe_after_delete': None, 'backup': None, 'critical_space_action_blocker': None, 'warning_low_space': None, 'destroy': None, 'format': None, 'discard_after_delete': None, 'storage_format': None}}, '_ansible_no_log': False, 'changed': False} 2024-09-11 08:16:25,364-0400 ERROR otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:113 ovirtsdk4.Error: Fault reason is "Operation Failed". Fault detail is "[Storage domain cannot be reached. Please ensure it is accessible from the host(s).]". HTTP response code is 400. 2024-09-11 08:16:25,464-0400 ERROR otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:113 fatal: [localhost]: FAILED! => {"changed": false, "msg": "Fault reason is \"Operation Failed\". Fault detail is \"[Storage domain cannot be reached. Please ensure it is accessible from the host(s).]\". HTTP response code is 400."} 2024-09-11 08:16:25,765-0400 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils._process_output:109 PLAY RECAP [localhost] : ok: 20 changed: 1 unreachable: 0 skipped: 9 failed: 1 2024-09-11 08:16:25,866-0400 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils.run:226 ansible-playbook rc: 2 2024-09-11 08:16:25,866-0400 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils.run:233 ansible-playbook stdout: 2024-09-11 08:16:25,867-0400 DEBUG otopi.ovirt_hosted_engine_setup.ansible_utils ansible_utils.run:236 ansible-playbook stderr: 2024-09-11 08:16:25,867-0400 DEBUG otopi.plugins.otopi.dialog.human human.queryString:174 query OVEHOSTED_STORAGE_DOMAIN_TYPE 2024-09-11 08:16:25,868-0400 DEBUG otopi.plugins.otopi.dialog.human dialog.__logString:204 DIALOG:SEND Please specify the storage you would like to use (glusterfs, iscsi, fc, nfs)[nfs]: ———

1 1

ovirt hosts unassigned
by dragons＠namecheap.com 11 Sep '24

11 Sep '24

Hello, we have found ovirt hosts in unassigned states after renewing certificates for oVirt engine via engine-setup --offline. The first launch ended with an error. We had an immutable attribute on the file /etc/pki/ovirt-engine/keys/engine_id_rsa After which we removed the attribute and launched again engine-setup --offline. In the events for each host we see the following errors: VDSM ov3.example.com command Get Host Capabilities failed: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target Is there any way to return the host to normal without losing data?

1 0

Re: [External] : cpu pinning validation failed - virtual cpu does not exist in vm
by parallax 10 Sep '24

10 Sep '24

thanks for your reply it looks like I stepped in and in fact the total number of cores for the VM was less than I was trying to pin чт, 5 сент. 2024 г. в 16:32, Marcos Sungaila <marcos.sungaila(a)oracle.com>: > Hi, > > > > You disabled "Count Threads As Cores" so you need extra steps to identify > which cores you can pin. > > > > You can check your CPU cores availability using the lscpu command, look: > > # lscpu | grep -e NUMA -e ^CPU$s$ > > CPU(s): 72 > > NUMA node0 CPU(s): 0-17,36-53 > > NUMA node1 CPU(s): 18-35,54-71 > > The previous command lists physical cores and threads. > > > > The following command shows you logical cores running on a physical core: > > # grep -e "processor" -e "physical id" -e "core id" /proc/cpuinfo | grep > -E -A1 -B1 "physical id.*0$" | grep -E -B 2 "core id.* 0$" > > processor : 0 <-- physical core 0 on socket 0 > > physical id : 0 > > core id : 0 > > -- > > processor : 36 <-- second thread on physical core 0 on socket 0 > > physical id : 0 > > core id : 0 > > > > I hope it can help you troubleshoot your scenario. > > > > Marcos > > > > *From:* parallax <dd432690(a)gmail.com> > *Sent:* Sunday, July 28, 2024 6:25 AM > *To:* users <users(a)ovirt.org> > *Subject:* [External] : [ovirt-users] cpu pinning validation failed - > virtual cpu does not exist in vm > > > > server with two Gold 6346 > > this message appears when trying pin any cores after 14 core: > > 16#16_17#17_18#18_19#19_20#20_21#21_22#22 > > "cpu pinning validation failed - virtual cpu does not exist in vm" > > > > "Count Threads As Cores" is disabled > > pinning cores from 9 to 15 goes well > 0#0_1#1_2#2_3#3_4#4_5#5_6#6_7#7_8#8_9#9_10#10_11#11 >

1 0

Re: [External] : Fallback Method to Start a VM if oVirt Engine is Offline
by Tommi Finance 09 Sep '24

09 Sep '24

Hi Marcos, thank you so much for your feedback and clarification. I've recognized you are a big player in the Oracle Universe; we are currently migrating from Oracle VM Server to Oracle Linux Virtualization Manager. the target was to include also some other Servers from VMware Hypervisor. Potentially this is a showstopper in our strategy but we will see. thank you again Thomas Am Mo., 2. Sept. 2024 um 21:55 Uhr schrieb Marcos Sungaila < marcos.sungaila(a)oracle.com>: > Hi Thomas, > > No, it is not possible. All VM's interactions (start, stop, reboot, etc) > are performed by the Engine application (ovirt-engine service). > > Marcos > > -----Original Message----- > From: Thomas Leitner <tommifinance(a)gmail.com> > Sent: Monday, August 26, 2024 8:29 AM > To: users(a)ovirt.org > Subject: [External] : [ovirt-users] Fallback Method to Start a VM if oVirt > Engine is Offline > > Hello, > > Is there a way to start a VM directly from the KVM host if the oVirt > Engine is down or temporarily unavailable due to network issues or other > reasons? > > thanks for any advice. > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: > https://urldefense.com/v3/__https://www.ovirt.org/privacy-policy.html__;!!A… > oVirt Code of Conduct: > https://urldefense.com/v3/__https://www.ovirt.org/community/about/community… > List Archives: > https://urldefense.com/v3/__https://lists.ovirt.org/archives/list/users@ovi… >

2 1

Storage Domain Not synchronized, To synchronize them, please move them to maintenance and then activate.
by Arup Jyoti Thakuria 09 Sep '24

09 Sep '24

Dear All, In our Ovirt Engine Infrastructure, recently we have received an alert for one of our "Storage Domain" The alert is as mentioned below---- =================================== Storage domains with IDs [fb34e5b7-e850-4d66-ab47-3011d2000338] could not be synchronized. To synchronize them, please move them to maintenance and then activate. ========================================================== What is the consequence of this alert, if we ignore this what can happen to the infra, are we going to face any issue with the VMs, currently this infra is under production

2 1