- Users - oVirt List Archives

no space left to upgrade hosted-engine
by Nathanaël Blanchet 04 Oct '18

04 Oct '18

I've deployed and hosted-engine with the hosted-engine provided appliance. When runing hosted-engine --upgrade-appliance on one host, it tells me "If your engine VM is already based on el7 you can also simply upgrade the engine there." So I launched a yum update on the hosted-engine, but it complains there is no space left on / [root@infra ~]# df -h Sys. de fichiers Taille Utilisé Dispo Uti% Monté sur /dev/vda3 6,2G 6,2G 20K 100% / devtmpfs 7,8G 0 7,8G 0% /dev tmpfs 7,8G 4,0K 7,8G 1% /dev/shm tmpfs 7,8G 9,0M 7,8G 1% /run tmpfs 7,8G 0 7,8G 0% /sys/fs/cgroup /dev/mapper/ovirt-home 1014M 33M 982M 4% /home /dev/mapper/ovirt-tmp 2,0G 33M 2,0G 2% /tmp /dev/vda1 1014M 162M 853M 16% /boot /dev/mapper/ovirt-var 20G 631M 20G 4% /var /dev/mapper/ovirt-log 10G 58M 10G 1% /var/log /dev/mapper/ovirt-audit 1014M 59M 956M 6% /var/log/audit tmpfs 1,6G 0 1,6G 0% /run/user/0 Is the only way is to deploy the new appliance? -- Nathanaël Blanchet Supervision réseau Pôle Infrastrutures Informatiques 227 avenue Professeur-Jean-Louis-Viala 34193 MONTPELLIER CEDEX 5 Tél. 33 (0)4 67 54 84 55 Fax 33 (0)4 67 54 84 14 blanchet(a)abes.fr

2 2

ODL and Openstack issue
by Soujanya Bargavi 04 Oct '18

04 Oct '18

I am running one controller and one compute node. Controller node is running both ODL and OpenStack. I created tenants, underthem i created networks and launched instances on them. All is see on ODL web GUI is 3 swithces, and I guess those are br-int and br-ex of controller and br-int of compute and the links are missing too. Is there anyway where I can see my whole OpenStack https://goo.gl/6CgufL topology on ODL GUI with the links?

1 0

Reg: Enabling Nested virtualization.
by syedquadeer＠ctel.in 04 Oct '18

04 Oct '18

Dear Team, Need help to enable nested virtualization in Ovirt VM's. As when I checked my cpu info and kvm acceleration info, it is giving below output. # kvm-ok INFO: Your CPU does not support KVM extensions KVM acceleration can NOT be used # cat /sys/module/kvm/parameters/nested cat: /sys/module/kvm/parameters/nested: No such file or directory # virsh -r list Id Name State ---------------------------------------------------- Thanks & Regards, Syed Abdul Qadeer. 7660022818.

2 1

Re: Need to register with oVirt community
by Evgheni Dereveanchin 04 Oct '18

04 Oct '18

Hi Manish, If you want to deploy oVirt and use it, please follow our installation guide: https://www.ovirt.org/documentation/install-guide/Installation_Guide/ If you'd like to contribute to the project there's several ways like submitting patches to the code or helping with documentation or infra: https://www.ovirt.org/community/ Please let me know if you have any further questions. On Wed, Oct 3, 2018 at 10:12 AM Manish Shukla <Manish.Shukla(a)locuz.com> wrote: > Dear Team, > > > > Please suggest me how to joined community. I would like to be an > implementation of the oVirt infrastructure. > > > > > > > > > > Thanks & Regards, > > > > Manish SHUKLA > > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/2NMDN6K643COC… > -- Regards, Evgheni Dereveanchin

1 0

[ANN] oVirt 4.2.7 Second Release Candidate is now available
by Sandro Bonazzola 04 Oct '18

04 Oct '18

The oVirt Project is pleased to announce the availability of the oVirt 4.2.7 Second Release Candidate, as of October 4th, 2018. This update is a release candidate of the seventh in a series of stabilization updates to the 4.2 series. This is pre-release software. This pre-release should not to be used in production. This release is available now for: * Red Hat Enterprise Linux 7.5 or later * CentOS Linux (or similar) 7.5 or later This release supports Hypervisor Hosts running: * Red Hat Enterprise Linux 7.5 or later * CentOS Linux (or similar) 7.5 or later See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is available - oVirt Node is available [2] Additional Resources: * Read more about the oVirt 4.2.7 release highlights: http://www.ovirt.org/release/4.2.7/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.2.7/ [2] http://resources.ovirt.org/pub/ovirt-4.2-pre/iso/ -- SANDRO BONAZZOLA MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://red.ht/sig> <https://www.redhat.com/en/events/red-hat-open-source-day-italia?sc_cid=701f…>

1 0

lost connection to hosted engine
by Artem Tambovskiy 04 Oct '18

04 Oct '18

Hi, Just run into the issue during cluster upgrade from 4.24 to 4.2.6.1. I'm running small cluster with 2 hosts and gluster storage. Once I upgraded one of the hosts to 4.2.6.1 something went wrong (looks like it tried to start HE instance) and I can't connect to hosted-engine any longer. As I can see HostedEngine is still running on the second host (and another yet 7 VM's) , but I can't stop it. ovirt-ha-agent and ovirt-ha-broker are failing to start. hosted-engine --vm-status gives nothing but error message "The hosted engine configuration has not been retrieved from shared storage. Please ensure that ovirt-ha-agent is running and the storage server is reachable." ps -ef shows plenty of vdsm processes in defunc state thats probably the reason why agent and brocker can't start. Just wondering that is the good way to start problem resolution here to minimize downtime for running VM's? Restart vdsm and try again restarting agent and broker or just reboot the whole host? Regards, Artem

2 1

hosted-engine --deploy erorr
by mustafa.taha.mu95＠gmail.com 04 Oct '18

04 Oct '18

i configuer ovirt-self host and then i clear it by this command : /usr/sbin/ovirt-hosted-engine-cleanup then i want to re-deploy the selfhost by this error appear : [root@ovirtnode44 ~]# hosted-engine --deploy [ INFO ] Stage: Initializing [ INFO ] Stage: Environment setup During customization use CTRL-D to abort. Continuing will configure this host for serving as hypervisor and create a local VM with a running engine. The locally running engine will be used to configure a storage domain and create a VM there. At the end the disk of the local VM will be moved to the shared storage. Are you sure you want to continue? (Yes, No)[Yes]: It has been detected that this program is executed through an SSH connection without using screen. Continuing with the installation may lead to broken installation if the network connection fails. It is highly recommended to abort the installation and run it inside a screen session using command "screen". Do you want to continue anyway? (Yes, No)[No]: yes Configuration files: [] Log file: /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20181004025609-bzthh6.log Version: otopi-1.7.8 (otopi-1.7.8-1.el7) [ INFO ] Stage: Environment packages setup [ INFO ] Stage: Programs detection [ INFO ] Stage: Environment setup [ INFO ] Stage: Environment customization --== STORAGE CONFIGURATION ==-- --== HOST NETWORK CONFIGURATION ==-- [ INFO ] Bridge ovirtmgmt already created Please indicate a pingable gateway IP address [192.168.3.2]: [ INFO ] TASK [Gathering Facts] [ INFO ] ok: [localhost] [ INFO ] TASK [Detecting interface on existing management bridge] [ INFO ] ok: [localhost] [ INFO ] TASK [Get all active network interfaces] [ INFO ] TASK [Filter bonds with bad naming] [ INFO ] TASK [Generate output list] [ INFO ] ok: [localhost] Please indicate a nic to set ovirtmgmt bridge on: (enp24s0f0) [enp24s0f0]: --== VM CONFIGURATION ==-- If you want to deploy with a custom engine appliance image, please specify the path to the OVA archive you would like to use (leave it empty to skip, the setup will use ovirt-engine-appliance rpm installing it if missing): [ INFO ] Detecting host timezone. Please provide the FQDN you would like to use for the engine appliance. Note: This will be the FQDN of the engine VM you are now going to launch, it should not point to the base host or to any other existing machine. Engine VM FQDN: []: ovirtengine.exalt.ps Please provide the domain name you would like to use for the engine appliance. Engine VM domain: [exalt.ps] Enter root password that will be used for the engine appliance: Confirm appliance root password: Enter ssh public key for the root user that will be used for the engine appliance (leave it empty to skip): [WARNING] Skipping appliance root ssh public key Do you want to enable ssh access for the root user (yes, no, without-password) [yes]: Please specify the number of virtual CPUs for the VM (Defaults to appliance OVF value): [4]: Please specify the memory size of the VM in MB (Defaults to appliance OVF value): [16384]: You may specify a unicast MAC address for the VM or accept a randomly generated default [00:16:3e:03:a8:09]: How should the engine VM network be configured (DHCP, Static)[DHCP]? Static Please enter the IP address to be used for the engine VM [192.168.0.1]: 192.168.200.45 [ INFO ] The engine VM will be configured to use 192.168.200.45/16 Please provide a comma-separated list (max 3) of IP addresses of domain name servers for the engine VM Engine VM DNS (leave it empty to skip) [192.168.200.6]: Add lines for the appliance itself and for this host to /etc/hosts on the engine VM? Note: ensuring that this host could resolve the engine VM hostname is still up to you (Yes, No)[No] --== HOSTED ENGINE CONFIGURATION ==-- Please provide the name of the SMTP server through which we will send notifications [localhost]: Please provide the TCP port number of the SMTP server [25]: Please provide the email address from which notifications will be sent [root@localhost]: Please provide a comma-separated list of email addresses which will get notifications [root@localhost]: Enter engine admin password: Confirm engine admin password: [ INFO ] Stage: Setup validation [ INFO ] Stage: Transaction setup [ INFO ] Stage: Misc configuration [ INFO ] Stage: Package installation [ INFO ] Stage: Misc configuration [ INFO ] Stage: Transaction commit [ INFO ] Stage: Closing up [ INFO ] Cleaning previous attempts [ INFO ] TASK [Gathering Facts] [ INFO ] ok: [localhost] [ INFO ] TASK [Stop libvirt service] [ INFO ] ok: [localhost] [ INFO ] TASK [Drop vdsm config statements] [ INFO ] TASK [Restore initial abrt config files] [ INFO ] TASK [Restart abrtd service] [ INFO ] changed: [localhost] [ INFO ] TASK [Drop libvirt sasl2 configuration by vdsm] [ INFO ] changed: [localhost] [ INFO ] TASK [Stop and disable services] [ INFO ] TASK [Start libvirt] [ INFO ] changed: [localhost] [ INFO ] TASK [Check for leftover local Hosted Engine VM] [ INFO ] changed: [localhost] [ INFO ] TASK [Destroy leftover local Hosted Engine VM] [ INFO ] skipping: [localhost] [ INFO ] TASK [Check for leftover defined local Hosted Engine VM] [ INFO ] changed: [localhost] [ INFO ] TASK [Undefine leftover local engine VM] [ INFO ] changed: [localhost] [ INFO ] TASK [Check for leftover defined Hosted Engine VM] [ INFO ] changed: [localhost] [ INFO ] TASK [Undefine leftover engine VM] [ INFO ] skipping: [localhost] [ INFO ] TASK [Remove eventually entries for the local VM from known_hosts file] [ INFO ] changed: [localhost] [ INFO ] Starting local VM [ INFO ] TASK [Gathering Facts] [ INFO ] ok: [localhost] [ INFO ] TASK [Start libvirt] [ INFO ] ok: [localhost] [ INFO ] TASK [Activate default libvirt network] [ INFO ] ok: [localhost] [ INFO ] TASK [Get libvirt interfaces] [ INFO ] ok: [localhost] [ INFO ] TASK [Get routing rules] [ INFO ] changed: [localhost] [ INFO ] TASK [Save bridge name] [ INFO ] ok: [localhost] [ INFO ] TASK [Wait for the bridge to appear on the host] [ INFO ] changed: [localhost] [ INFO ] TASK [Refresh network facts] [ INFO ] skipping: [localhost] [ INFO ] TASK [Prepare CIDR for virbr0] [ INFO ] ok: [localhost] [ INFO ] TASK [Add outbound route rules] [ INFO ] skipping: [localhost] [ INFO ] TASK [Add inbound route rules] [ INFO ] skipping: [localhost] [ INFO ] TASK [Gathering Facts] [ INFO ] ok: [localhost] [ INFO ] TASK [include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [Avoid localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [Get host address resolution] [ INFO ] changed: [localhost] [ INFO ] TASK [Check address resolution] [ INFO ] skipping: [localhost] [ INFO ] TASK [Parse host address resolution] [ INFO ] ok: [localhost] [ INFO ] TASK [Ensure host address resolves locally] [ INFO ] skipping: [localhost] [ INFO ] TASK [Get target address from selected interface] [ INFO ] ok: [localhost] [ INFO ] TASK [Check the resolved address resolves on the selected interface] [ INFO ] skipping: [localhost] [ INFO ] TASK [Check for alias] [ INFO ] changed: [localhost] [ INFO ] TASK [Ensure the resolved address resolves only on the selected interface] [ INFO ] skipping: [localhost] [ INFO ] TASK [Avoid localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [Get engine FQDN resolution] [ INFO ] changed: [localhost] [ INFO ] TASK [Check engine FQDN resolution] [ INFO ] skipping: [localhost] [ INFO ] TASK [Parse engine FQDN resolution] [ INFO ] ok: [localhost] [ INFO ] TASK [Ensure engine FQDN doesn't resolve locally] [ INFO ] skipping: [localhost] [ INFO ] TASK [Check http/https proxy] [ INFO ] TASK [Register the engine FQDN as a host] [ INFO ] changed: [localhost] [ INFO ] TASK [Create directory for local VM] [ INFO ] changed: [localhost] [ INFO ] TASK [Set local vm dir path] [ INFO ] ok: [localhost] [ INFO ] TASK [Fix local VM directory permission] [ INFO ] changed: [localhost] [ INFO ] TASK [include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [Install ovirt-engine-appliance rpm] [ INFO ] ok: [localhost] [ INFO ] TASK [Parse appliance configuration for path] [ INFO ] changed: [localhost] [ INFO ] TASK [Parse appliance configuration for sha1sum] [ INFO ] changed: [localhost] [ INFO ] TASK [Get OVA path] [ INFO ] ok: [localhost] [ INFO ] TASK [Compute sha1sum] [ INFO ] ok: [localhost] [ INFO ] TASK [Compare sha1sum] [ INFO ] skipping: [localhost] [ INFO ] TASK [Register appliance PATH] [ INFO ] skipping: [localhost] [ INFO ] TASK [Extract appliance to local VM directory] [ INFO ] changed: [localhost] [ INFO ] TASK [include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [Find the local appliance image] [ INFO ] ok: [localhost] [ INFO ] TASK [Set local_vm_disk_path] [ INFO ] ok: [localhost] [ INFO ] TASK [Get appliance disk size] [ INFO ] changed: [localhost] [ INFO ] TASK [Parse qemu-img output] [ INFO ] ok: [localhost] [ INFO ] TASK [Create cloud init user-data and meta-data files] [ INFO ] TASK [Create ISO disk] [ INFO ] changed: [localhost] [ INFO ] TASK [Create local VM] [ INFO ] changed: [localhost] [ INFO ] TASK [Get local VM IP] [ INFO ] changed: [localhost] [ INFO ] TASK [Remove eventually entries for the local VM from /etc/hosts] [ INFO ] changed: [localhost] [ INFO ] TASK [Create an entry in /etc/hosts for the local VM] [ INFO ] changed: [localhost] [ INFO ] TASK [Wait for SSH to restart on the local VM] [ INFO ] ok: [localhost -> localhost] [ INFO ] TASK [Gathering Facts] [ INFO ] ok: [ovirtengine.exalt.ps] [ INFO ] TASK [Wait for the local VM] [ INFO ] ok: [ovirtengine.exalt.ps] [ INFO ] TASK [Add an entry for this host on /etc/hosts on the local VM] [ INFO ] changed: [ovirtengine.exalt.ps] [ INFO ] TASK [Set FQDN] [ INFO ] changed: [ovirtengine.exalt.ps] [ INFO ] TASK [Force the local VM FQDN to temporary resolve on the natted network address] [ INFO ] changed: [ovirtengine.exalt.ps] [ INFO ] TASK [Restore sshd reverse DNS lookups] [ INFO ] changed: [ovirtengine.exalt.ps] [ INFO ] TASK [Generate an answer file for engine-setup] [ INFO ] changed: [ovirtengine.exalt.ps] [ INFO ] TASK [Include before engine-setup custom tasks files for the engine VM] [ INFO ] TASK [Execute engine-setup] [ INFO ] changed: [ovirtengine.exalt.ps] [ INFO ] TASK [Include after engine-setup custom tasks files for the engine VM] [ INFO ] TASK [Configure LibgfApi support] [ INFO ] skipping: [ovirtengine.exalt.ps] [ INFO ] TASK [Restart ovirt-engine service for LibgfApi support] [ INFO ] skipping: [ovirtengine.exalt.ps] [ INFO ] TASK [Mask cloud-init services to speed up future boot] [ INFO ] TASK [Clean up bootstrap answer file] [ INFO ] changed: [ovirtengine.exalt.ps] [ INFO ] TASK [Gathering Facts] [ INFO ] ok: [localhost] [ INFO ] TASK [Wait for ovirt-engine service to start] [ INFO ] ok: [localhost] [ INFO ] TASK [Detect VLAN ID] [ INFO ] changed: [localhost] [ INFO ] TASK [Set Engine public key as authorized key without validating the TLS/SSL certificates] [ INFO ] changed: [localhost] [ INFO ] TASK [include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [Obtain SSO token using username/password credentials] [ INFO ] ok: [localhost] [ INFO ] TASK [Enable GlusterFS at cluster level] [ INFO ] skipping: [localhost] [ INFO ] TASK [Set VLAN ID at datacenter level] [ INFO ] skipping: [localhost] [ INFO ] TASK [Force host-deploy in offline mode] [ INFO ] ok: [localhost] [ INFO ] TASK [Add host] [ INFO ] changed: [localhost] [ INFO ] TASK [Wait for the host to be up] [ ERROR ] fatal: [localhost]: FAILED! => {"ansible_facts": {"ovirt_hosts": []}, "attempts": 120, "changed": false} [ INFO ] TASK [Fetch logs from the engine VM] [ INFO ] ok: [localhost] [ INFO ] TASK [Set destination directory path] [ INFO ] ok: [localhost] [ INFO ] TASK [Create destination directory] [ INFO ] changed: [localhost] [ INFO ] TASK [include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [Find the local appliance image] [ INFO ] ok: [localhost] [ INFO ] TASK [Set local_vm_disk_path] [ INFO ] ok: [localhost] [ INFO ] TASK [Give the vm time to flush dirty buffers] [ INFO ] TASK [Copy engine logs] [ INFO ] TASK [include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [Remove local vm dir] [ INFO ] changed: [localhost] [ INFO ] TASK [Notify the user about a failure] [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "The system may not be provisioned according to the playbook results: please check the logs for the issue, fix accordingly or re-deploy from scratch.\n"} [ ERROR ] Failed to execute stage 'Closing up': Failed executing ansible-playbook [ INFO ] Stage: Clean up [ INFO ] Cleaning temporary resources [ INFO ] TASK [Gathering Facts] [ INFO ] ok: [localhost] [ INFO ] TASK [Fetch logs from the engine VM] [ INFO ] ok: [localhost] [ INFO ] TASK [Set destination directory path] [ INFO ] ok: [localhost] [ INFO ] TASK [Create destination directory] [ INFO ] changed: [localhost] [ INFO ] TASK [include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [Find the local appliance image] [ INFO ] ok: [localhost] [ INFO ] TASK [Set local_vm_disk_path] [ INFO ] skipping: [localhost] [ INFO ] TASK [Give the vm time to flush dirty buffers] [ INFO ] ok: [localhost] [ INFO ] TASK [Copy engine logs] [ INFO ] TASK [include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [Remove local vm dir] [ INFO ] ok: [localhost] [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine-setup/answers/answers-20181004031555.conf' [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Hosted Engine deployment failed: please check the logs for the issue, fix accordingly or re-deploy from scratch. Log file is located at /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20181004025609-bzthh6.log

3 2

ISCSI domain won't attach
by Vincent Royer 03 Oct '18

03 Oct '18

I setup an iscsi domain in hopes of moving away from NFS. I created a new logical network for this on a storage vlan. both hosts and storage server grabbed a good IP on this vlan. ISCSI Domain connected ok and I started moving disks over from the NFS domain. Transfers were completing so I let it do its thing. This morning, after the transfers completed, three things occurred in quick succession: 1. Affinity Rules Enforcement Manager started. 2. Invalid status on Data Center. Setting status to Non Responsive. 3. Storage Pool Manager runs on Host brian.xxx.net (Address: brian.xxx.net) Data Center. 4. Storage Domain domiscsi was deactivated by system because it's not visible by any of the hosts. Try to attach it again and it fails. Have another coffee and try to attach again to get logs, and this time it attaches just fine. domain disconnected vdsm log: https://pastebin.com/pfGerEE5 Successful attach operation vdsm log: https://pastebin.com/c0U07QXg host Brian can't seem to keep the storage domain https://pastebin.com/ySAqiqA3 both hosts seem to have connected sessions when looking from the storage server: [image: image.png] Seems like it might be one problematic host, because engine keeps trying to reboot it to get it to reconnect to the storage domain. Maybe after a few tries it just deems the domain is bad. Not sure! Any help is appreciated!

2 2

ovirt-ha-agent failed to start
by mustafa.taha.mu95＠gmail.com 03 Oct '18

03 Oct '18

hi i try to start ovirt-ha-agent in my self-host machine but it does not work if i run journalctl -xe it shows : Oct 03 04:33:24 ovirtnode44.exalt.ps ovirt-ha-agent[81909]: ovirt-ha-agent ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine ERROR Failed to start necessary mo Oct 03 04:33:24 ovirtnode44.exalt.ps ovirt-ha-agent[81909]: ovirt-ha-agent ovirt_hosted_engine_ha.agent.agent.Agent ERROR Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/agent/agent.py", line 131, in _run_agent return action(he) File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/agent/agent.py", line 55, in action_prope return he.start_monitoring() File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/agent/hosted_engine.py", line 413, in sta self._initialize_broker() File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/agent/hosted_engine.py", line 535, in _in m.get('options', {})) File "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py", line 83, in start_mon .format(type, options, e)) RequestError: Failed to start monitor ping, options {'addr': '192.168.3.2'}: [Errno 2] No such file or di Oct 03 04:33:24 ovirtnode44.exalt.ps ovirt-ha-agent[81909]: ovirt-ha-agent ovirt_hosted_engine_ha.agent.agent.Agent ERROR Trying to restart agent anybody have idea ?

2 1

clean up a fc lun to reuse it
by Nathanaël Blanchet 03 Oct '18

03 Oct '18

Hi all, I tried to install the Hosted-Engine on a FC lun, and the first time, it failed at the end because of a sanlock issue. So I fixed it and the re-deoployed from scratch until this new issue [ ERROR ] Error: Fault reason is "Operation Failed". Fault detail is "[Physical device initialization failed. Please check that the device is empty and accessible by the host.]". HTTP response code is 400. Before, I found that the lun [2] was used: [ INFO ] ok: [localhost] The following luns have been found on the requested target: [1] 36006016039a142001792ac5b1b9e513a 1024GiB DGC VRAID status: free, paths: 8 active [2] 36006016039a142006755b25b7505d26b 100GiB DGC VRAID status: used, paths: 8 active So it was the good explanation for the failure. Following the admin guide, I cleaned up the lun using |# dd if=/dev/zero of=/dev/mapper/||36006016039a142006755b25b7505d26b bs=1M count=200 oflag=direct| And re-deployed it until it complains the device was not empty despite of before. The script still reported that the status of the lun was "used" Finally, I rebooted the host, and that time the script considered the lun status as free. So there is somewhere a bit of code into the ansible script that keeps the old status of the lun before dd, until rebooting. Is there an other way to refresh the lun status after dd ? Nathanaël Blanchet Supervision réseau Pôle Infrastrutures Informatiques 227 avenue Professeur-Jean-Louis-Viala 34193 MONTPELLIER CEDEX 5 Tél. 33 (0)4 67 54 84 55 Fax 33 (0)4 67 54 84 14 blanchet(a)abes.fr

2 2

Adding hosts to oVirt-Engine
by manish.shukla＠locuz.com 03 Oct '18

03 Oct '18

Below error i am getting while adding same host in to Engine. Error log on Engine. Kindlly Suggest 2018-10-03 12:02:32,271+05 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesAsyncVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-96) [] Command 'GetCapabilitiesAsyncVDSCommand(HostName = 192.168.0.28, VdsIdAndVdsVDSCommandParametersBase:{hostId='0fb0f4ac-162e-4cfd-ab15-641c04861d2f', vds='Host[192.168.0.28,0fb0f4ac-162e-4cfd-ab15-641c04861d2f]'})' execution failed: java.net.ConnectException: Connection refused 2018-10-03 12:02:33,342+05 INFO [org.ovirt.vdsm.jsonrpc.client.reactors.ReactorClient] (SSL Stomp Reactor) [] Connecting to /192.168.0.28 2018-10-03 12:02:33,345+05 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetAllVmStatsVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] Command 'GetAllVmStatsVDSCommand(HostName = 192.168.0.28, VdsIdVDSCommandParametersBase:{hostId='0fb0f4ac-162e-4cfd-ab15-641c04861d2f'})' execution failed: java.net.ConnectException: Connection refused 2018-10-03 12:02:33,345+05 INFO [org.ovirt.engine.core.vdsbroker.monitoring.PollVmStatsRefresher] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [] Failed to fetch vms info for host '192.168.0.28' - skipping VMs monitoring. 2018-10-03 12:02:35,283+05 INFO [org.ovirt.vdsm.jsonrpc.client.reactors.ReactorClient] (SSL Stomp Reactor) [] Connecting to /192.168.0.28 2018-10-03 12:02:35,285+05 ERROR [org.ovirt.engine.core.vdsbroker.monitoring.HostMonitoring] (EE-ManagedThreadFactory-engineScheduled-Thread-32) [] Unable to RefreshCapabilities: ConnectException: Connection refused 2018-10-03 12:02:35,288+05 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesAsyncVDSCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-32) [] Command 'GetCapabilitiesAsyncVDSCommand(HostName = 192.168.0.28, VdsIdAndVdsVDSCommandParametersBase:{hostId='0fb0f4ac-162e-4cfd-ab15-641c04861d2f', vds='Host[192.168.0.28,0fb0f4ac-162e-4cfd-ab15-641c04861d2f]'})' execution failed: java.net.ConnectException: Connection refused

3 4

Need to register with oVirt community
by Manish Shukla 03 Oct '18

03 Oct '18

Dear Team, Please suggest me how to joined community. I would like to be an implementation of the oVirt infrastructure. Thanks & Regards, Manish SHUKLA

1 0

P2V Tools for oVirt
by Vinícius Ferrão 03 Oct '18

03 Oct '18

Hello, I’m looking for a P2V tool to migrate some physical machine to oVirt. I’m specifically worried about database servers that must be made virtual. What are the recommendations and tested tools? Thanks in advance,

1 0

[OT] transferring kvm raw mage from filesystem to lvm based
by Gianluca Cecchi 02 Oct '18

02 Oct '18

Hello, I have a windows 7 VM that is composed by a raw disk on filesystem on Fedora 28. I would like to transfer this VM to another environment, always based on same version of Fedora 28, but where the storage is configured in virt-manager as lvm based, so similar to what happens in oVirt block based storage domains. I'm trying to figure how to transfer the image. I presume I can create a new LV and then leave some bytes for the LVM header into the created LV and then make a sort of dd with offset? Anyone has any hint? Thanks in advance, Gianluca

3 3

iSCSI multipath with Dell Compellent
by Bernhard Dick 02 Oct '18

02 Oct '18

Hi, I'm trying to achieve iSCSI multipathing with an Dell Compellent SC4020 array. As the Dell Array does not work as an ALUA system it displays available LUNs only on the currently active system (here is a good description that I found: https://niktips.wordpress.com/2016/05/16/dell-compellent-is-not-an-alua-sto… ). As a result I cannot add the currently non-active controller to an iSCSI-Bond (as it does not present the LUNs to oVirt) and so the path to the second controller will not be up. Is there any way to solve this? Regards Bernhard

2 4

Change network interface for hosted engine iSCSI connection
by Bernhard Dick 02 Oct '18

02 Oct '18

Hi, after I changed the network configuration of one of my hosted engine hosts in oVirt I am no longer able to run the ha-daemon on the host. When I run hosted-engine --connect-storage on this host I get the following error: vdsm.client.TimeoutError: Request StoragePool.connectStorageServer with args {'connectionParams': [{'netIfaceName': 'ens1f1', 'port': '3260', 'connection': '192.168.1.1', 'iqn': 'iqn.2002-03.com.compellent:5000 d...', 'user': '', 'tpgt': '0', 'ifaceName': 'ens1f1', 'password': '', 'id': 'cd5fa13f-fbb7-4cc6-a094-4b280dc7b514'}], 'storagepoolID': '00000000-0000-0000-0000-000000000000', 'domainType': 3} timed out after 60 seconds ens1f1 is the network card that has been used earlier for iSCSI, now it should connect via ens1f0. Is there a way to update this configuration for the host? Regards Bernhard

2 2

oVirt Metrics Store installation
by Markus Schaufler 02 Oct '18

02 Oct '18

Hi! I'm having trouble installing the oVirt Metrics Store following this https://www.ovirt.org/develop/release-management/features/metrics/metrics-s… respectively this guide https://www.ovirt.org/develop/release-management/features/metrics/setting-u… When executing the test script ANSIBLE_LOG_PATH=/tmp/ansible-prereq.log ansible-playbook -vvv -e @/root/vars.yaml -i /root/ansible-inventory-origin-39-aio playbooks/prerequisites.yml following error occurs: Using module file /usr/lib/python2.7/site-packages/ansible/modules/packaging/os/yum.py <localhost> EXEC /bin/sh -c '/usr/bin/python && sleep 0' fatal: [localhost]: FAILED! => { "attempts": 3, "changed": false, "invocation": { "module_args": { "allow_downgrade": false, "bugfix": false, "conf_file": null, "disable_gpg_check": false, "disable_plugin": [], "disablerepo": null, "enable_plugin": [], "enablerepo": null, "exclude": null, "install_repoquery": true, "installroot": "/", "list": null, "name": [ "docker", "atomic", "skopeo" ], "security": false, "skip_broken": false, "state": "present", "update_cache": false, "update_only": false, "validate_certs": true } }, "msg": "Error: Package: 1:atomic-1.22.1-22.git5a342e3.el7.x86_64 (centosplus)\n Requires: python-docker-py >= 1.7.2-1\n Available: docker-python-1.4.0-115.el7.x86_64 (centosplus)\n python-docker-py = 1.4.0-115.el7\n Available: python-docker-py-1.10.6-3.el7.noarch (centosplus)\n python-docker-py = 1.10.6-3.el7\n Available: python-docker-py-1.10.6-4.el7.noarch (centosplus)\n python-docker-py = 1.10.6-4.el7\n Available: python2-docker-2.4.2-1.2.el7.noarch (centos-openshift-origin-testing-cbs)\n python-docker-py = 2.4.2-1.2.el7\n Installed: python2-docker-3.3.0-1.el7.noarch (@centos-openshift-origin-testing)\n Not found\n", "rc": 1, "results": [ "2:docker-1.13.1-74.git6e3bb8e.el7.centos.x86_64 providing docker is already installed", "Loaded plugins: fastestmirror\nLoading mirror speeds from cached hostfile\nResolving Dependencies\n--> Running transaction check\n---> Package atomic.x86_64 1:1.22.1-22.git5a342e3.el7 will be installed\n--> Processing Dependency: python-docker-py >= 1.7.2-1 for package: 1:atomic-1.22.1-22.git5a342e3.el7.x86_64\nPackage python-docker-py-1.10.6-4.el7.noarch is obsoleted by python2-docker-3.3.0-1.el7.noarch which is already installed\n--> Processing Dependency: runc for package: 1:atomic-1.22.1-22.git5a342e3.el7.x86_64\n--> Processing Dependency: python-dateutil for package: 1:atomic-1.22.1-22.git5a342e3.el7.x86_64\n--> Processing Dependency: ostree for package: 1:atomic-1.22.1-22.git5a342e3.el7.x86_64\n--> Processing Dependency: gomtree for package: 1:atomic-1.22.1-22.git5a342e3.el7.x86_64\n---> Package skopeo.x86_64 1:0.1.31-1.dev.gitae64ff7.el7.centos will be installed\n--> Running transaction check\n---> Package atomic.x86_64 1:1.22.1-22.git5a342e3.el7 will be installed\n-- > Processing Dependency: python-docker-py >= 1.7.2-1 for package: 1:atomic-1.22.1-22.git5a342e3.el7.x86_64\nPackage python-docker-py-1.10.6-4.el7.noarch is obsoleted by python2-docker-3.3.0-1.el7.noarch which is already installed\n---> Package gomtree.x86_64 0:0.5.0-0.2.git16da0f8.el7 will be installed\n---> Package ostree.x86_64 0:2018.5-1.el7 will be installed\n--> Processing Dependency: libarchive.so.13()(64bit) for package: ostree-2018.5-1.el7.x86_64\n---> Package python-dateutil.noarch 0:1.5-7.el7 will be installed\n---> Package runc.x86_64 0:1.0.0-37.rc5.dev.gitad0f525.el7 will be installed\n--> Processing Dependency: criu for package: runc-1.0.0-37.rc5.dev.gitad0f525.el7.x86_64\n--> Running transaction check\n---> Package atomic.x86_64 1:1.22.1-22.git5a342e3.el7 will be installed\n--> Processing Dependency: python-docker-py >= 1.7.2-1 for package: 1:atomic-1.22.1-22.git5a342e3.el7.x86_64\nPackage python-docker-py-1.10.6-4.el7.noarch is obsoleted by python2-docker-3.3.0-1.el7. noarch which is already installed\n---> Package criu.x86_64 0:3.5-4.el7 will be installed\n--> Processing Dependency: libprotobuf-c.so.1(LIBPROTOBUF_C_1.0.0)(64bit) for package: criu-3.5-4.el7.x86_64\n--> Processing Dependency: libprotobuf-c.so.1()(64bit) for package: criu-3.5-4.el7.x86_64\n--> Processing Dependency: libnet.so.1()(64bit) for package: criu-3.5-4.el7.x86_64\n---> Package libarchive.x86_64 0:3.1.2-10.el7_2 will be installed\n--> Running transaction check\n---> Package atomic.x86_64 1:1.22.1-22.git5a342e3.el7 will be installed\n--> Processing Dependency: python-docker-py >= 1.7.2-1 for package: 1:atomic-1.22.1-22.git5a342e3.el7.x86_64\nPackage python-docker-py-1.10.6-4.el7.noarch is obsoleted by python2-docker-3.3.0-1.el7.noarch which is already installed\n---> Package libnet.x86_64 0:1.1.6-7.el7 will be installed\n---> Package protobuf-c.x86_64 0:1.0.2-3.el7 will be installed\n--> Finished Dependency Resolution\n You could try using --skip-broken to work around the pro blem\n You could try running: rpm -Va --nofiles --nodigest\n" ] } PLAY RECAP ************************************************************************************************************************************************************ localhost : ok=75 changed=6 unreachable=0 failed=1 I already already found out that there might be a bug in some older versions of openshift/ansible but the recent versions should be fine. Thanks for any suggestions on this!

2 1

Trouble to update the ovirt hosts (and solution)
by Arman Khalatyan 02 Oct '18

02 Oct '18

Current cocpit packages are conflicting, which is preventing the host update: .... Transaction check error: file /usr/share/cockpit/networkmanager/manifest.json from install of cockpit-system-176-2.el7.centos.noarch conflicts with file from package cockpit-networkmanager-172-1.el7.noarch file /usr/share/cockpit/networkmanager/po.ca.js.gz from install of cockpit-system-176-2.el7.centos.noarch conflicts with file from package cockpit-networkmanager-172-1.el7.noarch .... Looks like a current packaging of cocpit is wrong, it doesn't upgrade existing version. To solve it simply: yum remove cockpit-networkmanager-172-1.el7.noarch yum clean ;yum update all fixed. arman.

1 0

clarification needed on power management options
by g.vasilopoulos＠uoc.gr 01 Oct '18

01 Oct '18

I would like some clarification on MinFreeMemoryForUnderUtilized and MaxFreeMemoryForOverUtilized. How does that work? it seems the names should be oposite ? so if I have hosts with 64GB ram and I want to consider them over utilized at 48GB used and under utilized at 12GB used, should I set MinFreeMemoryForUnderUtilized=12GB MaxFreeMemoryForOverUtilized=48GB ? is this correct ? Also If ihave hyperconverged setup with 3 hosts having a replica3 storage for the engine and I disable policy management on these hosts, will these hosts be part of the overall utilization regardless if the engine can shut them down ?

1 0

Proxmox - oVirt Migration
by Leo David 01 Oct '18

01 Oct '18

Hello everyone, I have this situation where I need to migrate about 20 vms from Proxmox to oVirt. In this case, its about qcow2 images running on Proxmox. I there a recomended way and procedure for doing this ? Thank you very much ! -- Best regards, Leo David

4 10

liveliness check fails on one host
by g.vasilopoulos＠uoc.gr 01 Oct '18

01 Oct '18

I have an ovirt installation (4.2.6), and I have come accross this issue: Hosted engine can migrate to a certain host say host5. Admin portal is working fine, everything is working fine AFAIK but hosted-engne --vm-status shows "failed livelines check", when engine is on that host, so after a while the engine migrates somewhere else, it not a terrible problem, but it is annoying and I would like to know why is this happening, and if there is a way to fix it On every other host in the cluster this problem does not exists. firewall rules are exactly the same on hosts (in fact they are copied) . Any places to look at? Thank you

2 2

unable to add host in oVirt4.2
by Budur Nagaraju 01 Oct '18

01 Oct '18

Hi When I add additional node with the version4.2 in the engine , getting the error " Host has no default route." though the node has the default gateway, below are the logs, Can you please help on the same? https://pastebin.com/sDyVkvVY Thanks, Nagaraju

2 2

Ovirt engine General command validation failure.
by Alex K 01 Oct '18

01 Oct '18

Hi All, I have a ovirt 4.1.9 self hosted setup with 3 servers. As storage gluster is used in replica 3. I have at a cluster the following error, and this seems to have risen following a routine update (software packages) of the servers. When trying to delete a snapshot of a VM I get at GUI: General command validation failure. Engine logs the attached. Any help is appreciated. Thanx, Alex

3 6

Suggestion: Addition of a one-off PXE boot option in the "Edit Virtual Machine > Boot Options" section
by Zach Dzielinski 30 Sep '18

30 Sep '18

My current usage of oVirt requires me to switch the boot priorities for virtual machines from hard disk to pxe fairly often. It would be nice to see an option added in that would set a one-off pxe boot for virtual machines, reverting back to the original boot priorities after restart. This would save some time when dealing with multiple machines, by eliminating the need to switch them to pxe and then back to their previous boot options in the middle of their boot process.

3 2

Networking in oVirt
by sinan＠turka.nl 30 Sep '18

30 Sep '18

Hi all, Today I have installed oVirt 4.2 on a single machine (self hosted engine). My server has 6 physical adapters, but only 1 has an active uplink (enp2s0f0). The server is directly connected to the internet. The installation of oVirt created the following interfaces: - br-int - ovirtmgmt [IP configured: inet 85.17.x.x] - virbr0 [IP configured: inet 192.168.122.1] - virbr0-nic - vnet0 The hosted-engine is attached to ovirtmgmt and got IP 192.168.122.76 assigned. The hosted-engine does have access to the internet. The logical network ovirtmgmt is assigned to the physical interface enp2s0f0 when I check this via the oVirt webgui. I have 2 questions. Q1: I would like to achieve the following: - Create a new network, call it vm_network. - Create VM's and attach them to the vm_network. - These VM's should able to access the internet. Is this possible, if so, how do I achieve this? Q2: When my first question is answered and I have VM's running, some of the VM's I would like to give an external/public IP address. How do I achieve this? Thanks! Sinan

4 3