- Users - oVirt List Archives

Re: Ovirt Cpu pinning and Oracle database license with hardware partitioning.
by Karli Sjöberg 15 May '18

15 May '18

2 1

Re: Scheduling a Snapshot of a Gluster volume not working within Ovirt
by Mark Betham 15 May '18

15 May '18

Hi Sahina, Many thanks for your response and apologies for my delay in getting back to you. > How was the schedule created - is this using the Remote Data Sync Setup under Storage domain? Ovirt is configured in ‘Gluster’ mode, no VM support. When snapshotting we are taking a snapshot of the full Gluster volume. To configure the snapshot schedule I did the following; Login to Ovirt WebUI From left hand menu select ‘Storage’ and ‘Volumes' I then selected the volume I wanted to snapshot by clicking on the link within the ‘Name’ column From here I selected the ‘Snapshots’ tab From the top menu options I selected the drop down ‘Snapshot’ From the drop down options I selected ‘New’ A new window appeared titled ‘Create/Schedule Snapshot’ I entered a snapshot prefix and description into the available fields and selected the ‘Schedule’ page On the schedule page I selected ‘Minute’ from the ‘Recurrence’ drop down Set ‘Interval’ to every ’30’ minutes Changed timezone to ‘Europe/London=(GMT+00:00) London Standard Time’ Left value in ‘Start Schedule by’ at default value Set schedule to ‘No End Date’ Click 'OK' Interestingly I get the following message on the ‘Create/Schedule Snapshot’ page before clicking on OK; Frequent creation of snapshots would overload the cluster Gluster CLI based snapshot scheduling is enabled. It would be disabled once volume snapshots scheduled from UI. What is interesting is that I have not enabled 'Gluster CLI based snapshot scheduling’. After clicking OK I am returned to the Volume Snapshots tab. From this point I get no snapshots created according to the schedule set. At the time of clicking OK in the WebUI to enable the schedule I get the following in the engine log; 2018-05-14 09:24:11,068Z WARN [org.ovirt.engine.core.dal.job.ExecutionMessageDirector] (default task-128) [85d0b16f-2c0c-464f-bbf1-682c062a4871] The message key 'ScheduleGlusterVolumeSnapshot' is missing from 'bundles/ExecutionMessages' 2018-05-14 09:24:11,090Z INFO [org.ovirt.engine.core.bll.gluster.ScheduleGlusterVolumeSnapshotCommand] (default task-128) [85d0b16f-2c0c-464f-bbf1-682c062a4871] Before acquiring and wait lock 'EngineLock:{exclusiveLocks='[712da1df-4c11-405a-8fb6-f99aebc185c1=GLUSTER_SNAPSHOT]', sharedLocks=''}' 2018-05-14 09:24:11,090Z INFO [org.ovirt.engine.core.bll.gluster.ScheduleGlusterVolumeSnapshotCommand] (default task-128) [85d0b16f-2c0c-464f-bbf1-682c062a4871] Lock-wait acquired to object 'EngineLock:{exclusiveLocks='[712da1df-4c11-405a-8fb6-f99aebc185c1=GLUSTER_SNAPSHOT]', sharedLocks=''}' 2018-05-14 09:24:11,111Z INFO [org.ovirt.engine.core.bll.gluster.ScheduleGlusterVolumeSnapshotCommand] (default task-128) [85d0b16f-2c0c-464f-bbf1-682c062a4871] Running command: ScheduleGlusterVolumeSnapshotCommand internal: false. Entities affected : ID: 712da1df-4c11-405a-8fb6-f99aebc185c1 Type: GlusterVolumeAction group MANIPULATE_GLUSTER_VOLUME with role type ADMIN 2018-05-14 09:24:11,148Z INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-128) [85d0b16f-2c0c-464f-bbf1-682c062a4871] EVENT_ID: GLUSTER_VOLUME_SNAPSHOT_SCHEDULED(4,134), Snapshots scheduled on volume glustervol0 of cluster NOSS-LD5. 2018-05-14 09:24:11,156Z INFO [org.ovirt.engine.core.bll.gluster.ScheduleGlusterVolumeSnapshotCommand] (default task-128) [85d0b16f-2c0c-464f-bbf1-682c062a4871] Lock freed to object 'EngineLock:{exclusiveLocks='[712da1df-4c11-405a-8fb6-f99aebc185c1=GLUSTER_SNAPSHOT]', sharedLocks=''}' > Could you please provide the engine.log from the time the schedule was setup and including the time the schedule was supposed to run? The original log file is no longer present, so I removed the old schedule and created a new schedule, as per the instructions above, earlier today. I have therefor attached the engine log from today. The new schedule, which was set to run every 30 minutes, has not produced any snapshots after around 2 hours. Please let me know if you require any further information. Many thanks, Mark Betham. > > > > On Thu, May 3, 2018 at 4:37 PM, Mark Betham <mark.betham(a)googlemail.com <mailto:mark.betham@googlemail.com>> wrote: > Hi Ovirt community, > > I am hoping you will be able to help with a problem I am experiencing when trying to schedule a snapshot of my Gluster volumes using the Ovirt portal. > > Below is an overview of the environment; > > I have an Ovirt instance running which is managing our Gluster storage. We are running Ovirt version "4.2.2.6-1.el7.centos", Gluster version "glusterfs-3.13.2-2.el7" on a base OS of "CentOS Linux release 7.4.1708 (Core)", Kernel "3.10.0 - 693.21.1.el7.x86_64", VDSM version "vdsm-4.20.23-1.el7.centos". All of the versions of software are the latest release and have been fully patched where necessary. > > Ovirt has been installed and configured in "Gluster" mode only, no virtualisation. The Ovirt platform runs from one of the Gluster storage nodes. > > Gluster runs with 2 clusters, each located at a different physical site (UK and DE). Each of the storage clusters contain 3 storage nodes. Each storage cluster contains a single gluster volume. The Gluster volume is 3 * Replicated. The Gluster volume runs on top of a LVM thin vol which has been provisioned with a XFS filesystem. The system is running a Geo-rep between the 2 geo-diverse clusters. > > The host servers running at the primary site are of specification 1 * Intel(R) Xeon(R) CPU E3-1270 v5 @ 3.60GHz (8 core with HT), 64GB Ram, LSI MegaRAID SAS 9271 with bbu and cache, 8 * SAS 10K 2.5" 1.8TB enterprise drives configured in a RAID 10 array to give 6.52TB of useable space. The host servers running at the secondary site are of specification 1 * Intel(R) Xeon(R) CPU E3-1271 v3 @ 3.60GHz (8 core with HT), 32GB Ram, LSI MegaRAID SAS 9260 with bbu and cache, 8 * SAS 10K 2.5" 1.8TB enterprise drives configured in a RAID 10 array to give 6.52TB of useable space. The secondary site is for DR use only. > > When I first starting experiencing the issue and was unable to resolve it, I carried out a full rebuild from scratch across the two storage clusters. I had spent some time troubleshooting the issue but felt it worthwhile to ensure I had a clean platform, void of any potential issues which may be there due to some of the previous work carried out. The platform was rebuilt and data re-ingested. It is probably worth mentioning that this environment will become our new production platform, we will be migrating data and services to this new platform from our existing Gluster storage cluster. The date for the migration activity is getting closer so available time has become an issue and will not permit another full rebuild of the platform without impacting delivery date. > > After the rebuild with both storage clusters online, available and managed within the Ovirt platform I conducted some basic commissioning checks and I found no issues. The next step I took at this point was to setup the Geo-replication. This was brought online with no issues and data was seen to be synchronised without any problems. At this point the data re-ingestion was started and the new data was synchronised by the Geo-replication. > > The first step in bringing the snapshot schedule online was to validate that snapshots could be taken outside of the scheduler. Taking a manual snapshot via the OVirt portal worked without issue. Several were taken on both primary and secondary clusters. At this point a schedule was created on the primary site cluster via the Ovirt portal to create a snapshot of the storage at hourly intervals. The schedule was created successfully however no snapshots were ever created. Examining the logs did not show anything which I believed was a direct result of the faulty schedule but it is quite possible I missed something. > > How was the schedule created - is this using the Remote Data Sync Setup under Storage domain? > > > I reviewed many online articles, bug reports and application manuals in relation to snapshotting. There were several loosely related support articles around snapshotting but none of the recommendations seemed to work. I did the same with manuals and again nothing that seemed to work. What I did find were several references to running snapshots along with geo-replication and that the geo-replication should be paused when creating. So I removed all existing references to any snapshot schedule, paused the Geo-repl and recreated the snapshot schedule. The schedule was never actioned and no snapshots were created. Removed Geo-repl entirely, remove all schedules and carried out a reboot of the entire platform. When the system was fully back online and no pending heal operations the schedule was re-added for the primary site only. No difference in the results and no snapshots were created from the schedule. > > I have now reached the point where I feel I require assistance and hence this email request. > > If you require any further data then please let me know and I will do my best to get it for you. > > Could you please provide the engine.log from the time the schedule was setup and including the time the schedule was supposed to run? > > > > Any help you can give would be greatly appreciated. > > Many thanks, > > Mark Betham > > _______________________________________________ > Users mailing list > Users(a)ovirt.org <mailto:Users@ovirt.org> > http://lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users> > >

2 2

4.2.3 -- Snapshot in GUI Issue
by Zack Gould 15 May '18

15 May '18

Is there no way to restore a snapshot via the GUI on 4.2 anymore? I can't take snapshot, but there's no restore option. Since the new GUI design, it appears that it's missing?

2 1

Upgrading 4.1 to 4.2.3 -- which gluster repo?
by John Florian 15 May '18

15 May '18

I'm not using gluster, my storage is all via iSCSI. Given that http://mirror.centos.org/centos/7/storage/x86_64/gluster-3.8 is now causing yum failures when I try to run engine-setup, what should I do? -- John Florian

1 0

Re: strange issue: vm lost info on disk
by Benny Zlotnik 15 May '18

15 May '18

I see here a failed attempt: 2018-05-09 16:00:20,129-03 ERROR [org.ovirt.engine.core.dal. dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engineScheduled-Thread-67) [bd8eeb1d-f49a-4f91-a521-e0f31b4a7cbd] EVENT_ID: USER_MOVED_DISK_FINISHED_FAILURE(2,011), User admin@internal-authz have failed to move disk mail02-int_Disk1 to domain 2penLA. Then another: 2018-05-09 16:15:06,998-03 ERROR [org.ovirt.engine.core.dal. dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engineScheduled-Thread-34) [] EVENT_ID: USER_MOVED_DISK_FINISHED_FAILURE(2,011), User admin@internal-authz have failed to move disk mail02-int_Disk1 to domain 2penLA. Here I see a successful attempt: 2018-05-09 21:58:42,628-03 INFO [org.ovirt.engine.core.dal. dbbroker.auditloghandling.AuditLogDirector] (default task-50) [940b051c-8c63-4711-baf9-f3520bb2b825] EVENT_ID: USER_MOVED_DISK(2,008), User admin@internal-authz moving disk mail02-int_Disk1 to domain 2penLA. Then, in the last attempt I see the attempt was successful but live merge failed: 2018-05-11 03:37:59,509-03 ERROR [org.ovirt.engine.core.bll.MergeStatusCommand] (EE-ManagedThreadFactory-commandCoordinator-Thread-2) [d5b7fdf5-9c37-4c1f-8543-a7bc75c993a5] Failed to live merge, still in volume chain: [5d9d2958-96bc-49fa-9100-2f33a3ba737f, 52532d05-970e-4643-9774-96c31796062c] 2018-05-11 03:38:01,495-03 INFO [org.ovirt.engine.core.bll.SerialChildCommandsExecutionCallback] (EE-ManagedThreadFactory-engineScheduled-Thread-51) [d5b7fdf5-9c37-4c1f-8543-a7bc75c993a5] Command 'LiveMigrateDisk' (id: '115fc375-6018-4d59-b9f2-51ee05ca49f8') waiting on child command id: '26bc52a4-4509-4577-b342-44a679bc628f' type:'RemoveSnapshot' to complete 2018-05-11 03:38:01,501-03 ERROR [org.ovirt.engine.core.bll.snapshots.RemoveSnapshotSingleDiskLiveCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-51) [d5b7fdf5-9c37-4c1f-8543-a7bc75c993a5] Command id: '4936d196-a891-4484-9cf5-fceaafbf3364 failed child command status for step 'MERGE_STATUS' 2018-05-11 03:38:01,501-03 INFO [org.ovirt.engine.core.bll.snapshots.RemoveSnapshotSingleDiskLiveCommandCallback] (EE-ManagedThreadFactory-engineScheduled-Thread-51) [d5b7fdf5-9c37-4c1f-8543-a7bc75c993a5] Command 'RemoveSnapshotSingleDiskLive' id: '4936d196-a891-4484-9cf5-fceaafbf3364' child commands '[8da5f261-7edd-4930-8d9d-d34f232d84b3, 1c320f4b-7296-43c4-a3e6-8a868e23fc35, a0e9e70c-cd65-4dfb-bd00-076c4e99556a]' executions were completed, status 'FAILED' 2018-05-11 03:38:02,513-03 ERROR [org.ovirt.engine.core.bll.snapshots.RemoveSnapshotSingleDiskLiveCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-2) [d5b7fdf5-9c37-4c1f-8543-a7bc75c993a5] Merging of snapshot '319e8bbb-9efe-4de4-a9a6-862e3deb891f' images '52532d05-970e-4643-9774-96c31796062c'..'5d9d2958-96bc-49fa-9100-2f33a3ba737f' failed. Images have been marked illegal and can no longer be previewed or reverted to. Please retry Live Merge on the snapshot to complete the operation. 2018-05-11 03:38:02,519-03 ERROR [org.ovirt.engine.core.bll.snapshots.RemoveSnapshotSingleDiskLiveCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-2) [d5b7fdf5-9c37-4c1f-8543-a7bc75c993a5] Ending command 'org.ovirt.engine.core.bll.snapshots.RemoveSnapshotSingleDiskLiveCommand' with failure. 2018-05-11 03:38:03,530-03 INFO [org.ovirt.engine.core.bll.ConcurrentChildCommandsExecutionCallback] (EE-ManagedThreadFactory-engineScheduled-Thread-37) [d5b7fdf5-9c37-4c1f-8543-a7bc75c993a5] Command 'RemoveSnapshot' id: '26bc52a4-4509-4577-b342-44a679bc628f' child commands '[4936d196-a891-4484-9cf5-fceaafbf3364]' executions were completed, status 'FAILED' 2018-05-11 03:38:04,548-03 ERROR [org.ovirt.engine.core.bll.snapshots.RemoveSnapshotCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-66) [d5b7fdf5-9c37-4c1f-8543-a7bc75c993a5] Ending command 'org.ovirt.engine.core.bll.snapshots.RemoveSnapshotCommand' with failure. 2018-05-11 03:38:04,557-03 INFO [org.ovirt.engine.core.bll.snapshots.RemoveSnapshotCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-66) [d5b7fdf5-9c37-4c1f-8543-a7bc75c993a5] Lock freed to object 'EngineLock:{exclusiveLocks='[4808bb70-c9cc-4286-aa39-16b5798213ac=LIVE_STORAGE_MIGRATION]', sharedLocks=''}' I do not see the merge attempt in the vdsm.log, so please send vdsm logs for node02.phy.eze.ampgn.com.ar from that time. Also, did you use the auto-generated snapshot to start the vm? On Fri, May 11, 2018 at 6:11 PM, Juan Pablo <pablo.localhost(a)gmail.com> wrote: > after the xfs_repair, it says: sorry I could not find valid secondary > superblock > > 2018-05-11 12:09 GMT-03:00 Juan Pablo <pablo.localhost(a)gmail.com>: > >> hi, >> Alias: >> mail02-int_Disk1 >> Description: >> ID: >> 65ec515e-0aae-4fe6-a561-387929c7fb4d >> Alignment: >> Unknown >> Disk Profile: >> Wipe After Delete: >> No >> >> that one >> >> 2018-05-11 11:12 GMT-03:00 Benny Zlotnik <bzlotnik(a)redhat.com>: >> >>> I looked at the logs and I see some disks have moved successfully and >>> some failed. Which disk is causing the problems? >>> >>> On Fri, May 11, 2018 at 5:02 PM, Juan Pablo <pablo.localhost(a)gmail.com> >>> wrote: >>> >>>> Hi, just sent you via drive the files. attaching some extra info, >>>> thanks thanks and thanks : >>>> >>>> from inside the migrated vm I had the following attached dmesg output >>>> before rebooting >>>> >>>> regards and thanks again for the help, >>>> >>>> 2018-05-11 10:45 GMT-03:00 Benny Zlotnik <bzlotnik(a)redhat.com>: >>>> >>>>> Dropbox or google drive I guess. Also, can you attach engine.log? >>>>> >>>>> On Fri, May 11, 2018 at 4:43 PM, Juan Pablo <pablo.localhost(a)gmail.com >>>>> > wrote: >>>>> >>>>>> >>>>>> vdsm is too big for gmail ...any other way I can share it with you? >>>>>> >>>>>> >>>>>> ---------- Forwrded message ---------- >>>>>> From: Juan Pablo <pablo.localhost(a)gmail.com> >>>>>> Date: 2018-05-11 10:40 GMT-03:00 >>>>>> Subject: Re: [ovirt-users] strange issue: vm lost info on disk >>>>>> To: Benny Zlotnik <bzlotnik(a)redhat.com> >>>>>> Cc: users <Users(a)ovirt.org> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> Benny, thanks for your reply! it was a Live migration. sorry, it was >>>>>> from nfs to iscsi, not otherwise. I have reboot the vm for rescue and it >>>>>> does not detect any partitions with fdisk, Im running a xfs_repair with -n >>>>>> and found some corrupted primary superblock., its still running... ( so... >>>>>> there's info in the disk maybe?) >>>>>> >>>>>> attaching logs, let me know if those are the ones. >>>>>> thanks again! >>>>>> >>>>>> 2018-05-11 9:45 GMT-03:00 Benny Zlotnik <bzlotnik(a)redhat.com>: >>>>>> >>>>>>> Can you provide the logs? engine and vdsm. >>>>>>> Did you perform a live migration (the VM is running) or cold? >>>>>>> >>>>>>> On Fri, May 11, 2018 at 2:49 PM, Juan Pablo < >>>>>>> pablo.localhost(a)gmail.com> wrote: >>>>>>> >>>>>>>> Hi! , Im strugled about an ongoing problem: >>>>>>>> after migrating a vm's disk from an iscsi domain to a nfs and >>>>>>>> ovirt reporting the migration was successful, I see there's no data >>>>>>>> 'inside' the vm's disk. we never had this issues with ovirt so Im stranged >>>>>>>> about the root cause and if theres a chance of recovering the information. >>>>>>>> >>>>>>>> can you please help me out troubleshooting this one? I would really >>>>>>>> appreciate it =) >>>>>>>> running ovirt 4.2.1 here! >>>>>>>> >>>>>>>> thanks in advance, >>>>>>>> JP >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> Users mailing list -- users(a)ovirt.org >>>>>>>> To unsubscribe send an email to users-leave(a)ovirt.org >>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>>> >>>>> >>>> >>> >> >

3 11

sdk api and follow question / bug
by Peter Hudec 14 May '18

14 May '18

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Hi, I'm using API to get stats about the VM using the FOLLOW syntax described in http://ovirt.github.io/ovirt-engine-api-model/4.2/#documents/003_common_ concepts/follow In my case I list all VM with FOLLOWING - 'statistics', - 'nics.statistics', - 'disk_attachments.disk.statistics' On my env with about 50 VM the query took about 12s but the paring for the monitoring system is easy. The question is, it's better to split the code and use more queries as the note in the API docs recommends? Not sure it will be faster and less cpu intensive on the engine side. Also the disk_attachments.disk.statistics on VMs seems to be broken, I'm not getting the data on 4.2.2 installation. /using json syntax, not xml/ regards Peter - -- *Peter Hudec* Infraštruktúrny architekt phudec(a)cnc.sk <mailto:phudec@cnc.sk> *CNC, a.s.* Borská 6, 841 04 Bratislava Recepcia: +421 2 35 000 100 Mobil:+421 905 997 203 *www.cnc.sk* <http:///www.cnc.sk> -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEERCwM7E/ZOYb1ejhCbZu8qDuIhFsFAlr0A60ACgkQbZu8qDuI hFuh9RAAxP7o7Ve7tGN2c9ClG5FQcOpUH9Jwa6JiieEauFP3ivIdN1vVwA+YhgVW Ij9iDrXBWdtlVrlQojqInMrWjNUQoeSAiJGTee/LztjeKrxK7Hkbd6JC8GAL0WbK NWjHtzODX98MHhY7tgFoCW0xApUcN4c+jp5E8IuN/Gh19Ml3Nk9okUbbXDAnOxNK 1n5y1wnye2Gjk7hVwHoccY4V74FgjQ/hKbVRwjhDXHsHa9VHBpLJKtRhu1+5JdDj ba79B5KM7w9CYI/QnLDsKeGLHsEylEnw6zY6+seitRAtIGfe7XB+PDddt9dSoC91 bwZfVEx6GCUr6lp+YJsbd/BCFdjLpMhWuI1q3d0A1rzuB4P/9/ehK2fB5ZtE5IDx snkfNOk9sn/+AxuR79GnORdAOL38VFtNg1vZeHBVCg9byQ+mPcIlXdavYmZw9Sn3 lqsuS8xzcVltRw30eF9ne8uIlDETUdLQ84/RI2kxcbXT6naGWH9pbtto5ttY84Oc QLAzIKeSFj9GFQm06b5wCReA7gpApU1eMeBlXEhGfUwwpQ4Ma2QjGVHLM6yyIbHG uqKQcaU2z0gZANmDMw1RSv6AbDiDYvF5UNznCJklrxKycLKgiLVYEfsDcT8+mSKK pFqazDVn6HzEa+SnU+peSQxb0N1oCfnufUqyCumih+8FNmjr1V8= =u7vS -----END PGP SIGNATURE-----

2 2

oVirt 4.2.3 on RHEL/CentOS 7.5
by Stefano Stagnaro 14 May '18

14 May '18

Hello, since oVirt 4.2.3 release notes still indicates the availability for EL 7.4, I would like to know if the release has been tested for EL 7.5 yet and it's safe to install the VDSM on it (instead of oVirt Node). Thank you. -- Stefano Stagnaro Prisma Telecom Testing S.r.l. Via Petrocchi, 4 20127 Milano – Italy Tel. 02 26113507 int 339 e-mail: stefanos(a)prismatelecomtesting.com skype: stefano.stagnaro

2 1

oVirt guest agent on OpenSUSE 42.3 Leap
by Magnus Isaksson 14 May '18

14 May '18

Hi all I have some trouble with guest agent for OpenSUSE 42.3 Leap, short version, it don’t start. I have followed instructions that I could find about this error, but all I could find was for Debian 8 (http://lists.ovirt.org/pipermail/users/2018-January/086102.html) Still same problem. Anyone who can help me get this right? # cat /etc/os-release NAME="openSUSE Leap" VERSION="42.3" -------- # systemctl status ovirt-guest-agent ● ovirt-guest-agent.service - oVirt Guest Agent Loaded: loaded (/usr/lib/systemd/system/ovirt-guest-agent.service; enabled; vendor preset: disabled) Active: failed (Result: exit-code) since Mon 2018-05-07 17:25:40 CEST; 17h ago Process: 1167 ExecStart=/usr/bin/python /usr/share/ovirt-guest-agent/ovirt-guest-agent.py (code=exited, status=1/FAILURE) Process: 1156 ExecStartPre=/bin/chown ovirtagent:ovirtagent /run/ovirt-guest-agent.pid (code=exited, status=0/SUCCESS) Process: 1141 ExecStartPre=/bin/touch /run/ovirt-guest-agent.pid (code=exited, status=0/SUCCESS) Process: 1132 ExecStartPre=/sbin/modprobe virtio_console (code=exited, status=0/SUCCESS) Main PID: 1167 (code=exited, status=1/FAILURE) May 07 17:25:39 seweb03 systemd[1]: Starting oVirt Guest Agent... May 07 17:25:39 seweb03 systemd[1]: Started oVirt Guest Agent. May 07 17:25:40 seweb03 systemd[1]: ovirt-guest-agent.service: Main process exited, code=exited, status=1/FAILURE May 07 17:25:40 seweb03 systemd[1]: ovirt-guest-agent.service: Unit entered failed state. May 07 17:25:40 seweb03 systemd[1]: ovirt-guest-agent.service: Failed with result 'exit-code'. ------ From /var/log/ovirt-guest-agent/ovirt-guest-agent.log MainThread::INFO::2018-05-08 10:47:48,782::ovirt-guest-agent::59::root::Starting oVirt guest agent MainThread::ERROR::2018-05-08 10:47:48,783::ovirt-guest-agent::140::root::Unhandled exception in oVirt guest agent! Traceback (most recent call last): File "/usr/share/ovirt-guest-agent/ovirt-guest-agent.py", line 134, in <module> agent.run(daemon, pidfile) File "/usr/share/ovirt-guest-agent/ovirt-guest-agent.py", line 65, in run self.agent = LinuxVdsAgent(config) File "/usr/share/ovirt-guest-agent/GuestAgentLinux2.py", line 466, in __init__ AgentLogicBase.__init__(self, config) File "/usr/share/ovirt-guest-agent/OVirtAgentLogic.py", line 188, in __init__ self.vio = VirtIoChannel(config.get("virtio", "device")) File "/usr/share/ovirt-guest-agent/VirtIoChannel.py", line 151, in __init__ self._stream = VirtIoStream(vport_name) File "/usr/share/ovirt-guest-agent/VirtIoChannel.py", line 132, in __init__ self._vport = os.open(vport_name, os.O_RDWR) OSError: [Errno 13] Permission denied: '/dev/virtio-ports/ovirt-guest-agent.0' ----- # zypper info ovirt-guest-agent-common Loading repository data... Reading installed packages... Information for package ovirt-guest-agent-common: ------------------------------------------------- Repository : openSUSE-Leap-42.3-0 Name : ovirt-guest-agent-common Version : 1.0.12-3.1 Arch : noarch Vendor : openSUSE Installed Size : 140.0 KiB Installed : Yes Status : up-to-date Source package : ovirt-guest-agent-1.0.12-3.1.src Summary : Commonly used files of the oVirt Guest Agent Description : This is the oVirt management agent running inside the guest. The agent interfaces with the oVirt manager, supplying heart-beat info as well as run-time data from within the guest itself. The agent also accepts control commands to be run executed within the OS (like: shutdown and restart). ----- # zypper lr Repository priorities are without effect. All enabled repositories share the same priority. # | Alias | Name | Enabled | GPG Check | Refresh ---+---------------------------+-----------------------------------------+---------+-----------+-------- 1 | Virtualization_oVirt | oVirt (openSUSE_Leap_42.3) | Yes | (r ) Yes | No Regards Magnus

2 2

ovirt-error spm
by Арслан 14 May '18

14 May '18

Hello. There are hosts on which the OS centos7.3 Ovirt 4.1 service is deployed on hosts Hosts have been added to the ovirt cluster. SPM can not be assigned to any host. In logs such error: VDSM node2.exmple.local command HSMGetAllTasksStatusesVDS failed: Not SPM: () Can you tell me what could be the problem? If necessary, I will provide more voluminous logs. -- С уважением, Кубанов Арслан Инженер Департамент сетевой интеграции ЛАНИТ 129075, г. Москва, Мурманский проезд, д. 14, корп. 1 Тел.: +7 (495) 967-6650 #18287 www.lanit.ru

1 0

Package conflicts with release of oVirt 4.2.3 and CentOS 7.5 (cockpit packages required by ovirt)
by Sam McLeod 14 May '18

14 May '18

Howdy all, I've again been hit by packaging conflicts with the release of oVirt 4.2.3 and CentOS 7.5. The error I'm getting when running yum upgrade then accepting the list of packages to upgrade is: Transaction check error: file /usr/share/cockpit/networkmanager/manifest.json from install of cockpit-system-160-3.el7.centos.noarch conflicts with file from package cockpit-networkmanager-160-1.el7.centos.noarch * Both these packages are provided as part of centos extras, this leaves me wondering if this repo is expected to be disabled when oVirt is installed? * If that is the case, there should probably be some clear documentation on what yum repos should not ever be enabled when using oVirt as it seems package conflicts are very common - thoughts? The two packages: # yum info cockpit-system-160-3.el7.centos.noarch Loaded plugins: fastestmirror, package_upload, priorities, product-id, protectbase, rpm-warm-cache, search-disabled-repos, subscription-manager, versionlock This system is not registered with an entitlement server. You can use subscription-manager to register. Loading mirror speeds from cached hostfile 0 packages excluded due to repository protections Available Packages Name : cockpit-system Arch : noarch Version : 160 Release : 3.el7.centos Size : 1.1 M Repo : extras/7/x86_64 Summary : Cockpit admin interface package for configuring and troubleshooting a system URL : http://cockpit-project.org/ License : LGPLv2+ Description : This package contains the Cockpit shell and system configuration interfaces. # yum info cockpit-networkmanager-160-1.el7.centos.noarch Loaded plugins: fastestmirror, package_upload, priorities, product-id, protectbase, rpm-warm-cache, search-disabled-repos, subscription-manager, versionlock This system is not registered with an entitlement server. You can use subscription-manager to register. Loading mirror speeds from cached hostfile 0 packages excluded due to repository protections Installed Packages Name : cockpit-networkmanager Arch : noarch Version : 160 Release : 1.el7.centos Size : 114 k Repo : installed From repo : extras Summary : Cockpit user interface for networking, using NetworkManager URL : http://cockpit-project.org/ License : LGPLv2+ Description : The Cockpit component for managing networking. This package uses NetworkManager. -- Sam McLeod (protoporpoise on IRC) https://smcleod.net https://twitter.com/s_mcleod Words are my own opinions and do not necessarily represent those of my employer or partners.

4 7

oVirt 4.2.3 on RHEL/CentOS 7.5
by Stefano Stagnaro 14 May '18

14 May '18

Hello, since oVirt 4.2.3 release notes still indicates the availability for EL 7.4, I would like to know if the release has been tested for EL 7.5 yet and it's safe to install the VDSM on it (instead of oVirt Node). Thank you. -- Stefano Stagnaro Prisma Telecom Testing S.r.l. Via Petrocchi, 4 20127 Milano – Italy Tel. 02 26113507 int 339 e-mail: stefanos(a)prismatelecomtesting.com skype: stefano.stagnaro

1 0

Re: Ovirt Self Hosted engine deploy fails
by Simone Tiraboschi 14 May '18

14 May '18

Adding back the list as it could also help others. Can you please try manually starting ovn-controller checking where it's failing? On Mon, May 14, 2018 at 10:27 AM, Sumit Bharadia <03ce007(a)gmail.com> wrote: > the service has failed to start. Any suggestions? > > -- Logs begin at Mon 2018-05-14 06:51:03 BST, end at Mon 2018-05-14 > 09:21:48 BST. -- > May 14 06:51:28 ovirt systemd[1]: Dependency failed for OVN controller > daemon. > -- Subject: Unit ovn-controller.service has failed > -- Defined-By: systemd > -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel > -- > -- Unit ovn-controller.service has failed. > -- > -- The result is dependency. > May 14 06:51:28 ovirt systemd[1]: Job ovn-controller.service/start failed > with result 'dependency'. > May 14 07:02:40 ovirt systemd[1]: Dependency failed for OVN controller > daemon. > -- Subject: Unit ovn-controller.service has failed > -- Defined-By: systemd > -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel > -- > -- Unit ovn-controller.service has failed. > -- > -- The result is dependency. > May 14 07:02:40 ovirt systemd[1]: Job ovn-controller.service/start failed > with result 'dependency'. > May 14 08:04:51 ovirt systemd[1]: Dependency failed for OVN controller > daemon. > -- Subject: Unit ovn-controller.service has failed > -- Defined-By: systemd > -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel > -- > -- Unit ovn-controller.service has failed. > -- > -- The result is dependency. > May 14 08:04:51 ovirt systemd[1]: Job ovn-controller.service/start failed > with result 'dependency'. > > > > > On 14 May 2018 at 09:12, Simone Tiraboschi <stirabos(a)redhat.com> wrote: > >> >> >> On Mon, May 14, 2018 at 10:03 AM, Sumit Bharadia <03ce007(a)gmail.com> >> wrote: >> >>> attached from engine VM. >>> >> >> >> The issue is here: >> >> 2018-05-14 08:04:50,596 p=26024 u=ovirt | TASK >> [ovirt-provider-ovn-driver : Ensure ovn-controller is started] ************ >> 2018-05-14 08:04:51,991 p=26024 u=ovirt | fatal: [ovirt]: FAILED! => { >> "changed": false >> } >> >> MSG: >> >> Unable to start service ovn-controller: A dependency job for >> ovn-controller.service failed. See 'journalctl -xe' for details. >> >> >> Can you please double check the output of: >> journalctl -xe -u ovn-controller >> >> >> >>> >>> Thank you. >>> >>> On 14 May 2018 at 08:46, Simone Tiraboschi <stirabos(a)redhat.com> wrote: >>> >>>> Hi, >>>> can you please attach host-deploy logs? >>>> You can find them under /var/log/ovirt-engine/host-deploy on the >>>> engine VM (you can reach it with ssh from the host you tried to deploy). >>>> >>>> On Mon, May 14, 2018 at 9:27 AM, <03ce007(a)gmail.com> wrote: >>>> >>>>> I am trying to setup self hosted ovirt engine (4.2) on centos 7.4, but >>>>> the setup fails after 'Add host' task on 'wait for the host to be up'. The >>>>> log doesn't seem to give clear indication where the issue might be. But I >>>>> got below when ssh manually into ovirt appliance where the engine-deploy >>>>> runs and I see the host status as'install_failed'. >>>>> >>>>> Where the issue might be, and where can i find detailed log on failure? >>>>> >>>>> "ovirt_hosts": [ >>>>> { >>>>> "address": "ovirt", >>>>> "affinity_labels": [], >>>>> "auto_numa_status": "unknown", >>>>> "certificate": { >>>>> "organization": "ovirt", >>>>> "subject": "O=ovirt,CN=ovirt" >>>>> }, >>>>> "cluster": { >>>>> "href": "/ovirt-engine/api/clusters/ba >>>>> 170b8e-5744-11e8-8676-00163e3c9a32", >>>>> "id": "ba170b8e-5744-11e8-8676-00163e3c9a32" >>>>> }, >>>>> "comment": "", >>>>> "cpu": { >>>>> "speed": 0.0, >>>>> "topology": {} >>>>> }, >>>>> "device_passthrough": { >>>>> "enabled": false >>>>> }, >>>>> "devices": [], >>>>> "external_network_provider_configurations": [], >>>>> "external_status": "ok", >>>>> "hardware_information": { >>>>> "supported_rng_sources": [] >>>>> }, >>>>> "hooks": [], >>>>> "href": "/ovirt-engine/api/hosts/aad0f >>>>> e84-2a9b-446d-ac02-82a8f6eb2a3c", >>>>> "id": "aad0fe84-2a9b-446d-ac02-82a8f6eb2a3c", >>>>> "katello_errata": [], >>>>> "kdump_status": "unknown", >>>>> "ksm": { >>>>> "enabled": false >>>>> }, >>>>> "max_scheduling_memory": 0, >>>>> "memory": 0, >>>>> "name": "ovirt", >>>>> "network_attachments": [], >>>>> "nics": [], >>>>> "numa_nodes": [], >>>>> "numa_supported": false, >>>>> "os": { >>>>> "custom_kernel_cmdline": "" >>>>> }, >>>>> "permissions": [], >>>>> "port": 54321, >>>>> "power_management": { >>>>> "automatic_pm_enabled": true, >>>>> "enabled": false, >>>>> "kdump_detection": true, >>>>> "pm_proxies": [] >>>>> }, >>>>> "protocol": "stomp", >>>>> "se_linux": {}, >>>>> "spm": { >>>>> "priority": 5, >>>>> "status": "none" >>>>> }, >>>>> "ssh": { >>>>> "fingerprint": "SHA256:o98ZOygBK0jcfY+l5nfi0E >>>>> GV9v3A4zjclG9d+C3U0WA", >>>>> "port": 22 >>>>> }, >>>>> "statistics": [], >>>>> "status": "install_failed", >>>>> "storage_connection_extensions": [], >>>>> "summary": { >>>>> "total": 0 >>>>> }, >>>>> "tags": [], >>>>> "transparent_huge_pages": { >>>>> "enabled": false >>>>> }, >>>>> "type": "rhel", >>>>> "unmanaged_networks": [], >>>>> "update_available": false >>>>> } >>>>> _______________________________________________ >>>>> Users mailing list -- users(a)ovirt.org >>>>> To unsubscribe send an email to users-leave(a)ovirt.org >>>>> >>>> >>>> >>> >> >

1 0

Ovirt Self Hosted engine deploy fails
by 03ce007＠gmail.com 14 May '18

14 May '18

I am trying to setup self hosted ovirt engine (4.2) on centos 7.4, but the setup fails after 'Add host' task on 'wait for the host to be up'. The log doesn't seem to give clear indication where the issue might be. But I got below when ssh manually into ovirt appliance where the engine-deploy runs and I see the host status as'install_failed'. Where the issue might be, and where can i find detailed log on failure? "ovirt_hosts": [ { "address": "ovirt", "affinity_labels": [], "auto_numa_status": "unknown", "certificate": { "organization": "ovirt", "subject": "O=ovirt,CN=ovirt" }, "cluster": { "href": "/ovirt-engine/api/clusters/ba170b8e-5744-11e8-8676-00163e3c9a32", "id": "ba170b8e-5744-11e8-8676-00163e3c9a32" }, "comment": "", "cpu": { "speed": 0.0, "topology": {} }, "device_passthrough": { "enabled": false }, "devices": [], "external_network_provider_configurations": [], "external_status": "ok", "hardware_information": { "supported_rng_sources": [] }, "hooks": [], "href": "/ovirt-engine/api/hosts/aad0fe84-2a9b-446d-ac02-82a8f6eb2a3c", "id": "aad0fe84-2a9b-446d-ac02-82a8f6eb2a3c", "katello_errata": [], "kdump_status": "unknown", "ksm": { "enabled": false }, "max_scheduling_memory": 0, "memory": 0, "name": "ovirt", "network_attachments": [], "nics": [], "numa_nodes": [], "numa_supported": false, "os": { "custom_kernel_cmdline": "" }, "permissions": [], "port": 54321, "power_management": { "automatic_pm_enabled": true, "enabled": false, "kdump_detection": true, "pm_proxies": [] }, "protocol": "stomp", "se_linux": {}, "spm": { "priority": 5, "status": "none" }, "ssh": { "fingerprint": "SHA256:o98ZOygBK0jcfY+l5nfi0EGV9v3A4zjclG9d+C3U0WA", "port": 22 }, "statistics": [], "status": "install_failed", "storage_connection_extensions": [], "summary": { "total": 0 }, "tags": [], "transparent_huge_pages": { "enabled": false }, "type": "rhel", "unmanaged_networks": [], "update_available": false }

3 2

how to attach an export domain to a new datacenter with an export domain not very well unattached from an obsolete datacenter
by n.vaye＠free.fr 14 May '18

14 May '18

Hi Ovirt Team, how to attach an export domain to a new datacenter with an export domain not very well unattached from an obsolete datacenter ? My old platform with ovirt 4.1 was deleted ans reinstalled with ovirt 4.2.3. It's ok but i have a problem with an export domain which has not been unattached before the extinction of the old platform. When i try to attach this export domain, i have the error message in the gui : Failed to attach Storage Domain oVirtNFS_EXPORT to Data Center xxx. How can i reinitialize the export domain without erase the data ? just the manager who own the domain. Thanks for all. Nicolas VAYE

2 2

ovirt host upgrade 4.2.2 -> 4.2.3
by Artem Tambovskiy 13 May '18

13 May '18

Hello, I'm upgrading my cluster from 4.2.2 to 4.2.3, HE upgrade went well, but having some issues with hosts upgrade: for some reason yum complaining about conflicts during transaction check: Transaction check error: file /usr/share/cockpit/networkmanager/manifest.json from install of cockpit-system-160-3.el7.centos.noarch conflicts with file from package cockpit-networkmanager-160-1.el7.centos.noarch Any ideas about the reason for this? Regards, Artem

2 1

Re: Users Digest, Vol 80, Issue 16
by Connon Wang 13 May '18

13 May '18

leave 2018年5月13日星期日， <users-request(a)ovirt.org> 写道： > Send Users mailing list submissions to > users(a)ovirt.org > > To subscribe or unsubscribe via email, send a message with subject or > body 'help' to > users-request(a)ovirt.org > > You can reach the person managing the list at > users-owner(a)ovirt.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Users digest..." > > Today's Topics: > > 1. Re: [ovirt-devel] Re: Mailing-Lists upgrade (Alex K) > 2. Re: Copying/Cloning a VM to another server (Jayme) > 3. Re: Host install failed - cannot set maintenance or remove > (Michael Burman) > 4. Re: Host install failed - cannot set maintenance or remove > (Callum Smith) > > > ---------------------------------------------------------------------- > > Date: Sun, 13 May 2018 14:27:00 +0300 > From: Alex K <rightkicktech(a)gmail.com> > Subject: [ovirt-users] Re: [ovirt-devel] Re: Mailing-Lists upgrade > To: Jayme Fall <jayme(a)silverorange.com> > Cc: users <users(a)ovirt.org>, infra <infra(a)ovirt.org>, Marc Dequènes > <duck(a)redhat.com>, devel <devel(a)ovirt.org> > Message-ID: > <CABMULtJ+V= > DKhRxHVEtBP-+JTN02f-B9PAuSmpt7bHZWRs5ysw(a)mail.gmail.com> > Content-Type: multipart/alternative; > boundary="000000000000822902056c14a65e" > > --000000000000822902056c14a65e > Content-Type: text/plain; charset="UTF-8" > Content-Transfer-Encoding: quoted-printable > > I am also experiencing random issues with this mailing list, even before > the upgrade. Some replies I never receive them ( I know this because a > friend of mine relays the emails I dont get...). I tried to unsubscribe and > subscribe but I still face this issue. > > Alex > > On Sun, May 13, 2018, 13:04 Jayme Fall <jayme(a)silverorange.com> wrote: > > > Two issues I=E2=80=99ve seen with this upgrade: > > > > 1. This address I=E2=80=99m sending from was subscribed to ovirt user > mai= > ling list > > in the past, I un-subscribed it a while ago and now I=E2=80=99m getting > m= > ail at it > > again. My other address @gmail.com was subscribed all along and is now > > NOT getting any email from the list. Are you operating on an old > > subscriber list? > > > > 2. I=E2=80=99ve un-subscribed this e-mail address 3 times, twice by > e-mai= > l and > > once by signing up an account directly at http://lists.ovirt.org/ with > > this e-mail address then un-subscribing via the website. I am still list > > mail sent to this address after un-subscribing. > > > > > > > > On May 8, 2018, at 10:46 AM, Marc Dequ=C3=A8nes (Duck) <duck(a)redhat.com> > = > wrote: > > > > Quack, > > > > On 05/08/2018 06:05 PM, Nir Soffer wrote: > > > > Another issue, old links to the mailing list are broken now: > > https://lists.ovirt.org/mailman/listinfo/devel > > > > Try to google "ovirt devel mailing list" to get the old links. > > > > We need to configure the http server to redirect to the new mailing list > > info page when old links are accessed. > > > > > > I added redirects for /mailman, /mailman/listinfo and > > /mailman/listinfo/<list>. Do you see anything missing or not working? > > > > Thanks for reporting it. > > \_o< > > > > _______________________________________________ > > Users mailing list -- users(a)ovirt.org > > To unsubscribe send an email to users-leave(a)ovirt.org > > > > > > _______________________________________________ > > Users mailing list -- users(a)ovirt.org > > To unsubscribe send an email to users-leave(a)ovirt.org > > > > --000000000000822902056c14a65e > Content-Type: text/html; charset="UTF-8" > Content-Transfer-Encoding: quoted-printable > > <div dir=3D"auto">I am also experiencing random issues with this mailing > li= > st, even before the upgrade. Some replies I never receive them ( I know > thi= > s because a friend of mine relays the emails I dont get...). I tried to > uns= > ubscribe and subscribe but I still face this issue.<div > dir=3D"auto"><br></= > div><div dir=3D"auto">Alex</div></div><br><div class=3D"gmail_quote"><div > d= > ir=3D"ltr">On Sun, May 13, 2018, 13:04 Jayme Fall <<a href=3D"mailto: > jay= > me(a)silverorange.com">jayme(a)silverorange.com</a>> > wrote:<br></div><blockq= > uote class=3D"gmail_quote" style=3D"margin:0 0 0 .8ex;border-left:1px #ccc > = > solid;padding-left:1ex"><div style=3D"word-wrap:break-word; > line-break:after= > -white-space">Two issues I=E2=80=99ve seen with this > upgrade:<div><br></div= > ><div>1. This address I=E2=80=99m sending from was subscribed to ovirt > user= > mailing list in the past, I un-subscribed it a while ago and now I=E2=80= > =99m getting mail at it again.=C2=A0 My other address @<a href=3D" > http://gm= > ail.com" target=3D"_blank" rel=3D"noreferrer">gmail.com</a> was > subscribed = > all along and is now NOT getting any email from the list.=C2=A0 Are you > ope= > rating on an old subscriber list?</div><div><br></div><div>2. > I=E2=80=99ve = > un-subscribed this e-mail address 3 times, twice by e-mail and once by > sign= > ing up an account directly at <a href=3D"http://lists.ovirt.org/" > target=3D= > "_blank" rel=3D"noreferrer">http://lists.ovirt.org/</a>=C2=A0with this > e-ma= > il address then un-subscribing via the website.=C2=A0 I am still list mail > = > sent to this address after un-subscribing.</div><div><br> > </div><div><br><di= > v><br><blockquote type=3D"cite"><div>On May 8, 2018, at 10:46 AM, Marc > Dequ= > =C3=A8nes (Duck) <<a href=3D"mailto:duck@redhat.com" target=3D"_blank" > r= > el=3D"noreferrer">duck(a)redhat.com</a>> wrote:</div><br > class=3D"m_-70506= > 71251018837462Apple-interchange-newline"><div><div>Quack,<br><br>On > 05/08/2= > 018 06:05 PM, Nir Soffer wrote:<br><br><blockquote type=3D"cite">Another > is= > sue, old links to the mailing list are broken now:<br><a href=3D" > https://li= > sts.ovirt.org/mailman/listinfo/devel" target=3D"_blank" > rel=3D"noreferrer">= > https://lists.ovirt.org/mailman/listinfo/devel</a><br><br>Try to google > &qu= > ot;ovirt devel mailing list" to get the old links.<br><br>We need to > c= > onfigure the http server to redirect to the new mailing list<br>info page > w= > hen old links are accessed.<br></blockquote><br>I added redirects for > /mail= > man, /mailman/listinfo and<br>/mailman/listinfo/<list>. Do you see > an= > ything missing or not working?<br><br>Thanks for reporting > it.<br>\_o<<b= > r><br>_______________________________________________<br>Users mailing > list= > -- <a href=3D"mailto:users@ovirt.org" target=3D"_blank" > rel=3D"noreferrer"= > >users(a)ovirt.org</a><br>To unsubscribe send an email to <a href=3D"mailto: > u= > sers-leave(a)ovirt.org" target=3D"_blank" rel=3D"noreferrer">users- > leave@ovir= > t.org</a><br></div></div></blockquote></div><br></div></ > div>_______________= > ________________________________<br> > Users mailing list -- <a href=3D"mailto:users@ovirt.org" > target=3D"_blank" = > rel=3D"noreferrer">users(a)ovirt.org</a><br> > To unsubscribe send an email to <a href=3D"mailto:users-leave@ovirt.org" > ta= > rget=3D"_blank" rel=3D"noreferrer">users-leave(a)ovirt.org</a><br> > </blockquote></div> > > --000000000000822902056c14a65e-- > > ------------------------------ > > Date: Sun, 13 May 2018 09:00:02 -0300 > From: Jayme <jaymef(a)gmail.com> > Subject: [ovirt-users] Re: Copying/Cloning a VM to another server > To: Alex Bartonek <Alex(a)unix1337.com> > Cc: users <users(a)ovirt.org> > Message-ID: > <CAPx9-C= > C052iuW0nWRfB33iUhyTOkZrs5bvzy_wnPurMSAzkfQ(a)mail.gmail.com> > Content-Type: multipart/alternative; > boundary="00000000000096842d056c151cbd" > > --00000000000096842d056c151cbd > Content-Type: text/plain; charset="UTF-8" > > You should be able to do this without having to shut vm down > > On Sun, May 13, 2018, 7:04 AM Alex Bartonek, <Alex(a)unix1337.com> wrote: > > > Just trying to make sure there isnt an easier way to do what I'm doing. > > I dont have an HA environment in my homelab. I have 3 VM's and I wanted > > to copy them to my backup r710 which runs oVirt 4.2. I basically shut > down > > my VM, exported it to an export domain on my primary r710. Then detached > > the export domain on the primary. On my "standby" r710 I imported the > > export domain from the primary r710, attached, activated and imported the > > VM. Worked as expected. > > > > I'm assuming this is the correct way to do so. I've tried Export to OVA > > but that didnt work like I wanted and I didnt care to keep messing with > > that option. > > > > Thanks > > -Alex > > > > > > Sent with ProtonMail <https://protonmail.com> Secure Email. > > > > _______________________________________________ > > Users mailing list -- users(a)ovirt.org > > To unsubscribe send an email to users-leave(a)ovirt.org > > > > --00000000000096842d056c151cbd > Content-Type: text/html; charset="UTF-8" > Content-Transfer-Encoding: quoted-printable > > <div dir=3D"auto">You should be able to do this without having to shut vm > d= > own=C2=A0</div><br><div class=3D"gmail_quote"><div dir=3D"ltr">On Sun, May > = > 13, 2018, 7:04 AM Alex Bartonek, <<a href=3D"mailto:Alex@unix1337.com > ">A= > lex(a)unix1337.com</a>> wrote:<br></div><blockquote > class=3D"gmail_quote" = > style=3D"margin:0 0 0 .8ex;border-left:1px #ccc > solid;padding-left:1ex"><di= > v>Just trying to make sure there isnt an easier way to do what I'm > doin= > g.<br></div><div>I dont have an HA environment in my homelab.=C2=A0 I have > = > 3 VM's and I wanted to copy them to my backup r710 which runs oVirt > 4.2= > .=C2=A0 I basically shut down my VM, exported it to an export domain on my > = > primary r710.=C2=A0 Then detached the export domain on the primary.=C2=A0 > O= > n my "standby" r710 I imported the export domain from the > primary= > r710, attached, activated and imported the VM.=C2=A0 Worked as expected.= > =C2=A0 <br></div><div><br></div><div>I'm assuming this is the correct > w= > ay to do so.=C2=A0 I've tried Export to OVA but that didnt work like I > = > wanted and I didnt care to keep messing with that > option.<br></div><div><br= > ></div><div>Thanks<br></div><div>-Alex<br></div><div><br></div><div class= > =3D"m_2252282611034026041protonmail_signature_block"><div > class=3D"m_225228= > 2611034026041protonmail_signature_block-user m_ > 2252282611034026041protonmai= > l_signature_block-empty"><br></div><div class=3D"m_ > 2252282611034026041proto= > nmail_signature_block-proton">Sent with <a href=3D"https://protonmail.com" > = > target=3D"_blank" rel=3D"noreferrer">ProtonMail</a> Secure > Email.<br></div>= > </div><div><br></div>_______________________________________________<br> > Users mailing list -- <a href=3D"mailto:users@ovirt.org" > target=3D"_blank" = > rel=3D"noreferrer">users(a)ovirt.org</a><br> > To unsubscribe send an email to <a href=3D"mailto:users-leave@ovirt.org" > ta= > rget=3D"_blank" rel=3D"noreferrer">users-leave(a)ovirt.org</a><br> > </blockquote></div> > > --00000000000096842d056c151cbd-- > > ------------------------------ > > Date: Sun, 13 May 2018 15:06:31 +0300 > From: Michael Burman <mburman(a)redhat.com> > Subject: [ovirt-users] Re: Host install failed - cannot set > maintenance or remove > To: "Kaplan, Alona" <alkaplan(a)redhat.com> > Cc: Callum Smith <callum(a)well.ox.ac.uk>, "users(a)ovirt.org" > <users(a)ovirt.org> > Message-ID: > <CANf_K0LuD8N=_ > bjhHFqCjis8z7+QYDzutcTtmTsv6Xuz0kT5+g(a)mail.gmail.com> > Content-Type: multipart/alternative; > boundary="00000000000022e52b056c15333a" > > --00000000000022e52b056c15333a > Content-Type: text/plain; charset="UTF-8" > > Adding Alona, > > On Tue, May 8, 2018 at 12:25 PM, Callum Smith <callum(a)well.ox.ac.uk> > wrote: > > > Dear All, > > > > There appears to be an issue with the host install on these, there's > quite > > a lot of errors being kicked out into the logs as they cycle through > > attempting to activate, failing, and then failing to go into > maintenance. I > > can't remove the hosts from the engine to attempt to reinstall them. > > > > Issue presented from having a statically configured network on the > > ovritmgmt network on the hosts before running the host install. There are > > SQL errors (FK missing) and assorted goodness in there. > > > > Any help greatly appreciated, not sure what the next step forward is from > > here > > > > Engine.log on dropbox: > > https://www.dropbox.com/s/82iem0ov869yh32/engine.log-20180508.zip?dl=0 > > > > Regards, > > Callum > > > > -- > > > > Callum Smith > > Research Computing Core > > Wellcome Trust Centre for Human Genetics > > University of Oxford > > e. callum(a)well.ox.ac.uk > > > > > > _______________________________________________ > > Users mailing list -- users(a)ovirt.org > > To unsubscribe send an email to users-leave(a)ovirt.org > > > > > > > -- > > Michael Burman > > Senior Quality engineer - rhv network - redhat israel > > Red Hat > > <https://www.redhat.com> > > mburman(a)redhat.com M: 0545355725 IM: mburman > <https://red.ht/sig> > > --00000000000022e52b056c15333a > Content-Type: text/html; charset="UTF-8" > Content-Transfer-Encoding: quoted-printable > > <div dir=3D"ltr">Adding Alona, <br></div><div > class=3D"gmail_extra"><br><di= > v class=3D"gmail_quote">On Tue, May 8, 2018 at 12:25 PM, Callum Smith > <span= > dir=3D"ltr"><<a href=3D"mailto:callum@well.ox.ac.uk" > target=3D"_blank">= > callum(a)well.ox.ac.uk</a>></span> wrote:<br><blockquote > class=3D"gmail_qu= > ote" style=3D"margin:0 0 0 .8ex;border-left:1px #ccc > solid;padding-left:1ex= > "> > > > > <div style=3D"word-wrap:break-word;line-break:after-white-space"><span > clas= > s=3D""> > <span style=3D"font-family:ArialMT">Dear All,</span> > <div style=3D"font-family:ArialMT"><br> > </div> > <div style=3D"font-family:ArialMT">There appears to be an issue with the > ho= > st install on these, there's quite a lot of errors being kicked out > int= > o the logs as they cycle through attempting to activate, failing, and then > = > failing to go into maintenance. > I can't remove the hosts from the engine to attempt to reinstall > them.= > </div> > <div style=3D"font-family:ArialMT"><br> > </div> > <div style=3D"font-family:ArialMT">Issue presented from having a > statically= > configured network on the ovritmgmt network on the hosts before running > th= > e host install. There are SQL errors (FK missing) and assorted goodness in > = > there.</div> > <div style=3D"font-family:ArialMT"><br> > </div> > </span><span class=3D""><div style=3D"font-family:ArialMT">Any help > greatly= > appreciated, not sure what the next step forward is from here</div> > <div style=3D"font-family:ArialMT"><br> > </div> > <div style=3D"font-family:ArialMT">Engine.log on dropbox:</div> > <div><font face=3D"ArialMT"><a href=3D"https://www.dropbox. > com/s/82iem0ov86= > 9yh32/engine.log-20180508.zip?dl=3D0" target=3D"_blank">https://www. > dropbox= > .com/s/<wbr>82iem0ov869yh32/engine.log-<wbr>20180508.zip? > dl=3D0</a></font><= > /div> > <div><font face=3D"ArialMT"><br> > </font></div> > </span><span class=3D""><div> > <div style=3D"color:rgb(0,0,0);letter-spacing:normal;text- > align:start;text-= > indent:0px;text-transform:none;white-space:normal;word- > spacing:0px;word-wra= > p:break-word"> > <div style=3D"word-wrap:break-word"> > <div style=3D"color:rgb(0,0,0);font-family:Arial;font-size: > 13px;font-style:= > normal;font-variant-caps:normal;font-weight:normal; > letter-spacing:normal;te= > xt-align:start;text-indent:0px;text-transform:none;white- > space:normal;word-= > spacing:0px"> > Regards,</div> > <div style=3D"color:rgb(0,0,0);font-family:Arial;font-size: > 13px;font-style:= > normal;font-variant-caps:normal;font-weight:normal; > letter-spacing:normal;te= > xt-align:start;text-indent:0px;text-transform:none;white- > space:normal;word-= > spacing:0px"> > Callum</div> > <div style=3D"color:rgb(0,0,0);font-family:Arial;font-size: > 13px;font-style:= > normal;font-variant-caps:normal;font-weight:normal; > letter-spacing:normal;te= > xt-align:start;text-indent:0px;text-transform:none;white- > space:normal;word-= > spacing:0px"> > <br> > </div> > <div style=3D"color:rgb(0,0,0);font-family:Arial;font-size: > 13px;font-style:= > normal;font-variant-caps:normal;font-weight:normal; > letter-spacing:normal;te= > xt-align:start;text-indent:0px;text-transform:none;white- > space:normal;word-= > spacing:0px"> > --<br> > <br> > Callum Smith</div> > <div style=3D"color:rgb(0,0,0);font-family:Arial;font-size: > 13px;font-style:= > normal;font-variant-caps:normal;font-weight:normal; > letter-spacing:normal;te= > xt-align:start;text-indent:0px;text-transform:none;white- > space:normal;word-= > spacing:0px"> > Research Computing Core</div> > <div style=3D"color:rgb(0,0,0);font-family:Arial;font-size: > 13px;font-style:= > normal;font-variant-caps:normal;font-weight:normal; > letter-spacing:normal;te= > xt-align:start;text-indent:0px;text-transform:none;white- > space:normal;word-= > spacing:0px"> > Wellcome Trust Centre for Human Genetics<br> > University of Oxford<br> > e. <a href=3D"mailto:callum@well.ox.ac.uk" target=3D"_blank">callum@well. > ox= > .ac.uk</a></div> > </div> > </div> > </div> > <br> > </span></div> > > <br>______________________________<wbr>_________________<br> > Users mailing list -- <a href=3D"mailto:users@ovirt.org">users(a)ovirt.org > </a= > ><br> > To unsubscribe send an email to <a href=3D"mailto:users-leave@ovirt.org > ">us= > ers-leave(a)ovirt.org</a><br> > <br></blockquote></div><br><br clear=3D"all"><br>-- <br><div > class=3D"gmail= > _signature" data-smartmail=3D"gmail_signature"><div dir=3D"ltr"><div><div > d= > ir=3D"ltr"><div> > <p style=3D"font-weight:bold;margin:0;padding:0;font-size: > 14px;text-transfo= > rm:uppercase;margin-bottom:0"><span>Michael </span> > <span>Burman</span></p> > <p style=3D"font-weight:normal;font-size:10px;margin:0px 0px > 4px;text-trans= > form:uppercase"><span>Senior Quality engineer - rhv network - redhat > israel= > </span><span style=3D"font-weight:normal;color:#aaa;margin:0"></span></p> > <p style=3D"font-weight:normal;margin:0;font-size:10px;color:#999"><a > style= > =3D"color:#0088ce;font-size:10px;margin:0;text-decoration: > none;font-family:= > 'overpass',sans-serif" href=3D"https://www.redhat.com" > target=3D"_b= > lank">Red Hat <span><br><br></span></a></p> > > > <p style=3D"font-weight:normal;margin:0px 0px > 6px;font-size:10px;color:rgb(= > 153,153,153)"><span style=3D"margin:0px;padding:0px"> > <a style=3D"color:#0088ce;font-size:10px;margin:0;text- > decoration:none;font= > -family:'overpass',sans-serif" href=3D"mailto:mburman@redhat.com" > t= > arget=3D"_blank">mburman(a)redhat.com</a>=C2=A0 =C2=A0</span> > <span>M: <a href=3D"tel:0545355725" style=3D"color:#0088ce;font- > size:11px;m= > argin:0;text-decoration:none;font-family:'overpass',sans-serif" > tar= > get=3D"_blank">0545355725</a> =C2=A0 =C2=A0</span> > <span>IM: <span>mburman</span></span></p> > > <table border=3D"0"><tbody><tr><td width=3D"100px"><a href=3D" > https://red.h= > t/sig" target=3D"_blank"> <img src=3D"https://www.redhat.com/ > files/brand/em= > ail/sig-redhat.png" width=3D"90" height=3D"auto"></a> </td> > </tr></tbody></table> > > </div></div></div></div></div> > </div> > > --00000000000022e52b056c15333a-- > > ------------------------------ > > Date: Sun, 13 May 2018 12:36:38 +0000 > From: Callum Smith <callum(a)well.ox.ac.uk> > Subject: [ovirt-users] Re: Host install failed - cannot set > maintenance or remove > To: Michael Burman <mburman(a)redhat.com> > Cc: "users(a)ovirt.org" <users(a)ovirt.org> > Message-ID: <CCDF4BE3-140F-4233-AD94-F5F7F0DDBFB8(a)well.ox.ac.uk> > Content-Type: multipart/alternative; > boundary="_000_CCDF4BE3140F4233AD94F5F7F0DDBFB8welloxacuk_" > > --_000_CCDF4BE3140F4233AD94F5F7F0DDBFB8welloxacuk_ > Content-Type: text/plain; charset="us-ascii" > Content-Transfer-Encoding: quoted-printable > > Sorry this is the existing discussion, duplicated because of the mail list > = > migration. > > Cheers, > > Callum > > On 13 May 2018, at 13:06, Michael Burman <mburman(a)redhat.com<mailto: > mburman= > @redhat.com>> wrote: > > Adding Alona, > > On Tue, May 8, 2018 at 12:25 PM, Callum Smith <callum(a)well.ox.ac.uk > <mailto:= > callum(a)well.ox.ac.uk>> wrote: > Dear All, > > There appears to be an issue with the host install on these, there's quite > = > a lot of errors being kicked out into the logs as they cycle through > attemp= > ting to activate, failing, and then failing to go into maintenance. I > can't= > remove the hosts from the engine to attempt to reinstall them. > > Issue presented from having a statically configured network on the > ovritmgm= > t network on the hosts before running the host install. There are SQL > error= > s (FK missing) and assorted goodness in there. > > Any help greatly appreciated, not sure what the next step forward is from > h= > ere > > Engine.log on dropbox: > https://www.dropbox.com/s/82iem0ov869yh32/engine.log-20180508.zip?dl=3D0 > > Regards, > Callum > > -- > > Callum Smith > Research Computing Core > Wellcome Trust Centre for Human Genetics > University of Oxford > e. callum(a)well.ox.ac.uk<mailto:callum@well.ox.ac.uk> > > > _______________________________________________ > Users mailing list -- users(a)ovirt.org<mailto:users@ovirt.org> > To unsubscribe send an email to users-leave(a)ovirt.org<mailto: > users-leave@ov= > irt.org> > > > > > -- > > Michael Burman > > Senior Quality engineer - rhv network - redhat israel > > Red Hat > > <https://www.redhat.com> > > mburman(a)redhat.com<mailto:mburman@redhat.com> M: > 0545355725<tel:05453557= > 25> IM: mburman > > [https://www.redhat.com/files/brand/email/sig-redhat.png]<ht > tps://red.ht/si= > g> > > --_000_CCDF4BE3140F4233AD94F5F7F0DDBFB8welloxacuk_ > Content-Type: text/html; charset="us-ascii" > Content-Transfer-Encoding: quoted-printable > > <html> > <head> > <meta http-equiv=3D"Content-Type" content=3D"text/html; > charset=3Dus-ascii"= > > > </head> > <body dir=3D"auto"> > Sorry this is the existing discussion, duplicated because of the mail list > = > migration. <br> > <br> > <div>Cheers, > <div><br> > </div> > <div>Callum</div> > </div> > <div><br> > On 13 May 2018, at 13:06, Michael Burman <<a href=3D"mailto: > mburman@redh= > at.com">mburman(a)redhat.com</a>> wrote:<br> > <br> > </div> > <blockquote type=3D"cite"> > <div> > <div dir=3D"ltr">Adding Alona, <br> > </div> > <div class=3D"gmail_extra"><br> > <div class=3D"gmail_quote">On Tue, May 8, 2018 at 12:25 PM, Callum Smith > <s= > pan dir=3D"ltr"> > <<a href=3D"mailto:callum@well.ox.ac.uk" target=3D"_blank">callum@well. > o= > x.ac.uk</a>></span> wrote:<br> > <blockquote class=3D"gmail_quote" style=3D"margin:0 0 0 > .8ex;border-left:1p= > x #ccc solid;padding-left:1ex"> > <div style=3D"word-wrap:break-word;line-break:after-white-space"><span > clas= > s=3D""><span style=3D"font-family:ArialMT">Dear All,</span> > <div style=3D"font-family:ArialMT"><br> > </div> > <div style=3D"font-family:ArialMT">There appears to be an issue with the > ho= > st install on these, there's quite a lot of errors being kicked out into > th= > e logs as they cycle through attempting to activate, failing, and then > fail= > ing to go into maintenance. I can't > remove the hosts from the engine to attempt to reinstall them.</div> > <div style=3D"font-family:ArialMT"><br> > </div> > <div style=3D"font-family:ArialMT">Issue presented from having a > statically= > configured network on the ovritmgmt network on the hosts before running > th= > e host install. There are SQL errors (FK missing) and assorted goodness in > = > there.</div> > <div style=3D"font-family:ArialMT"><br> > </div> > </span><span class=3D""> > <div style=3D"font-family:ArialMT">Any help greatly appreciated, not sure > w= > hat the next step forward is from here</div> > <div style=3D"font-family:ArialMT"><br> > </div> > <div style=3D"font-family:ArialMT">Engine.log on dropbox:</div> > <div><font face=3D"ArialMT"><a href=3D"https://www.dropbox. > com/s/82iem0ov86= > 9yh32/engine.log-20180508.zip?dl=3D0" target=3D"_blank">https://www. > dropbox= > .com/s/<wbr>82iem0ov869yh32/engine.log-<wbr>20180508.zip? > dl=3D0</a></font><= > /div> > <div><font face=3D"ArialMT"><br> > </font></div> > </span><span class=3D""> > <div> > <div style=3D"color:rgb(0,0,0);letter-spacing:normal;text- > align:start;text-= > indent:0px;text-transform:none;white-space:normal;word- > spacing:0px;word-wra= > p:break-word"> > <div style=3D"word-wrap:break-word"> > <div style=3D"color:rgb(0,0,0);font-family:Arial;font-size: > 13px;font-style:= > normal;font-variant-caps:normal;font-weight:normal; > letter-spacing:normal;te= > xt-align:start;text-indent:0px;text-transform:none;white- > space:normal;word-= > spacing:0px"> > Regards,</div> > <div style=3D"color:rgb(0,0,0);font-family:Arial;font-size: > 13px;font-style:= > normal;font-variant-caps:normal;font-weight:normal; > letter-spacing:normal;te= > xt-align:start;text-indent:0px;text-transform:none;white- > space:normal;word-= > spacing:0px"> > Callum</div> > <div style=3D"color:rgb(0,0,0);font-family:Arial;font-size: > 13px;font-style:= > normal;font-variant-caps:normal;font-weight:normal; > letter-spacing:normal;te= > xt-align:start;text-indent:0px;text-transform:none;white- > space:normal;word-= > spacing:0px"> > <br> > </div> > <div style=3D"color:rgb(0,0,0);font-family:Arial;font-size: > 13px;font-style:= > normal;font-variant-caps:normal;font-weight:normal; > letter-spacing:normal;te= > xt-align:start;text-indent:0px;text-transform:none;white- > space:normal;word-= > spacing:0px"> > --<br> > <br> > Callum Smith</div> > <div style=3D"color:rgb(0,0,0);font-family:Arial;font-size: > 13px;font-style:= > normal;font-variant-caps:normal;font-weight:normal; > letter-spacing:normal;te= > xt-align:start;text-indent:0px;text-transform:none;white- > space:normal;word-= > spacing:0px"> > Research Computing Core</div> > <div style=3D"color:rgb(0,0,0);font-family:Arial;font-size: > 13px;font-style:= > normal;font-variant-caps:normal;font-weight:normal; > letter-spacing:normal;te= > xt-align:start;text-indent:0px;text-transform:none;white- > space:normal;word-= > spacing:0px"> > Wellcome Trust Centre for Human Genetics<br> > University of Oxford<br> > e. <a href=3D"mailto:callum@well.ox.ac.uk" target=3D"_blank">callum@well. > ox= > .ac.uk</a></div> > </div> > </div> > </div> > <br> > </span></div> > <br> > ______________________________<wbr>_________________<br> > Users mailing list -- <a href=3D"mailto:users@ovirt.org">users(a)ovirt.org > </a= > ><br> > To unsubscribe send an email to <a href=3D"mailto:users-leave@ovirt.org > ">us= > ers-leave(a)ovirt.org</a><br> > <br> > </blockquote> > </div> > <br> > <br clear=3D"all"> > <br> > -- <br> > <div class=3D"gmail_signature" data-smartmail=3D"gmail_signature"> > <div dir=3D"ltr"> > <div> > <div dir=3D"ltr"> > <div> > <p style=3D"font-weight:bold;margin:0;padding:0;font-size: > 14px;text-transfo= > rm:uppercase;margin-bottom:0"> > <span>Michael </span><span>Burman</span></p> > <p style=3D"font-weight:normal;font-size:10px;margin:0px 0px > 4px;text-trans= > form:uppercase"> > <span>Senior Quality engineer - rhv network - redhat israel </span><span > st= > yle=3D"font-weight:normal;color:#aaa;margin:0"></span></p> > <p style=3D"font-weight:normal;margin:0;font-size:10px;color:#999"><a > style= > =3D"color:#0088ce;font-size:10px;margin:0;text-decoration: > none;font-family:= > 'overpass',sans-serif" href=3D"https://www.redhat.com" > target=3D"_blank">Re= > d Hat > <span><br> > <br> > </span></a></p> > <p style=3D"font-weight:normal;margin:0px 0px > 6px;font-size:10px;color:rgb(= > 153,153,153)"> > <span style=3D"margin:0px;padding:0px"><a style=3D"color:#0088ce;font- > size:= > 10px;margin:0;text-decoration:none;font-family:'overpass',sans-serif" > href= > =3D"mailto:mburman@redhat.com" target=3D"_blank">mburman(a)redhat.com > </a>&nbs= > p;  </span> > <span>M: <a href=3D"tel:0545355725" style=3D"color:#0088ce;font- > size:11px;m= > argin:0;text-decoration:none;font-family:'overpass',sans-serif" > target=3D"_= > blank"> > 0545355725</a>    </span> <span>IM: > <span>mburman</span></span></= > p> > <table border=3D"0"> > <tbody> > <tr> > <td width=3D"100px"><a href=3D"https://red.ht/sig" target=3D"_blank"><img > s= > rc=3D"https://www.redhat.com/files/brand/email/sig-redhat.png" > width=3D"90"= > height=3D"auto"></a> > </td> > </tr> > </tbody> > </table> > </div> > </div> > </div> > </div> > </div> > </div> > </div> > </blockquote> > </body> > </html> > > --_000_CCDF4BE3140F4233AD94F5F7F0DDBFB8welloxacuk_-- > > ------------------------------ > > Subject: Digest Footer > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s > > > ------------------------------ > > End of Users Digest, Vol 80, Issue 16 > ************************************* > -- Thanks & Best Regards! *Connon Wang*

1 0

Host install failed - cannot set maintenance or remove
by Callum Smith 13 May '18

13 May '18

Dear All, There appears to be an issue with the host install on these, there's quite a lot of errors being kicked out into the logs as they cycle through attempting to activate, failing, and then failing to go into maintenance. I can't remove the hosts from the engine to attempt to reinstall them. Issue presented from having a statically configured network on the ovritmgmt network on the hosts before running the host install. There are SQL errors (FK missing) and assorted goodness in there. Any help greatly appreciated, not sure what the next step forward is from here Engine.log on dropbox: https://www.dropbox.com/s/82iem0ov869yh32/engine.log-20180508.zip?dl=0 Regards, Callum -- Callum Smith Research Computing Core Wellcome Trust Centre for Human Genetics University of Oxford e. callum(a)well.ox.ac.uk<mailto:callum@well.ox.ac.uk>

2 2

oVirt 4.2 Upgrade
by KSNull Zero 13 May '18

13 May '18

Hello! Let's assume that we have 2 clusters in a shared Datacenter running version 4.1. Is it possible to have one cluster running v4.2 and another one running v4.1 in the same Datacenter (what version will it be, by the way ?) during transitioning to oVirt 4.2 ? Thank you.

2 1

Unsubscribe
by Shashwat shagun 13 May '18

13 May '18

Admin I had unsubscribed from ovirt months ago. Why am I subscribed again?

3 2

repo issues
by Fernando Fuentes 13 May '18

13 May '18

I am trying to upgrade my ovirt cluster and came across a repo 404. http://mirror.centos.org/centos/7/storage/x86_64/gluster-3.8/repodata/repom…: [Errno 14] HTTP Error 404 - Not Found Trying other mirror. Any ideas how to fix it? TIA! -- Fernando Fuentes ffuentes(a)darktcp.net

2 1

routing
by Justin Zygmont 13 May '18

13 May '18

--_000_CY4PR12MB1798A464096A4DD2D6F8C105AB800CY4PR12MB1798namp_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable I don't understand why you would want this unless the ovirtnode itself was = actually the router, wouldn't you want to only have an IP on the management= network, and leave the rest of the VLANS blank so they depend on the route= r to route the traffic: NIC1 -> ovirt-mgmt - gateway set NIC2 -> VLAN3, VLAN4, etc... https://www.ovirt.org/documentation/admin-guide/chap-Logical_Networks/ Viewing or Editing the Gateway for a Logical Network Users can define the gateway, along with the IP address and subnet mask, fo= r a logical network. This is necessary when multiple networks exist on a ho= st and traffic should be routed through the specified network, rather than = the default gateway. If multiple networks exist on a host and the gateways are not defined, retu= rn traffic will be routed through the default gateway, which may not reach = the intended destination. This would result in users being unable to ping t= he host. oVirt handles multiple gateways automatically whenever an interface goes up= or down. --_000_CY4PR12MB1798A464096A4DD2D6F8C105AB800CY4PR12MB1798namp_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <meta name=3D"Generator" content=3D"Microsoft Word 15 (filtered medium)"> <style></style> </head> <body lang=3D"EN-US" link=3D"#0563C1" vlink=3D"#954F72"> <div class=3D"WordSection1"> <p class=3D"MsoNormal">I don’t understand why you would want this unl= ess the ovirtnode itself was actually the router, wouldn’t you want t= o only have an IP on the management network, and leave the rest of the VLAN= S blank so they depend on the router to route the traffic:<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">NIC1  -> ovirt-mgmt  - gateway set<o:p>= </o:p></p> <p class=3D"MsoNormal">NIC2  -> VLAN3, VLAN4, etc…<o:p></o:p>= </p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal"><a href=3D"https://www.ovirt.org/documentation/admin= -guide/chap-Logical_Networks/">https://www.ovirt.org/documentation/admin-gu= ide/chap-Logical_Networks/</a><o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal" style=3D"mso-margin-top-alt:auto;mso-margin-bottom-a= lt:auto"><b><span style=3D"font-size:13.5pt;font-family:"Times New Rom= an",serif">Viewing or Editing the Gateway for a Logical Network<o:p></= o:p></span></b></p> <p class=3D"MsoNormal" style=3D"mso-margin-top-alt:auto;mso-margin-bottom-a= lt:auto"><span style=3D"font-size:12.0pt;font-family:"Times New Roman&= quot;,serif">Users can define the gateway, along with the IP address and su= bnet mask, for a logical network. This is necessary when multiple networks exist on a host and traffic should be routed throug= h the specified network, rather than the default gateway.<o:p></o:p></span>= </p> <p class=3D"MsoNormal" style=3D"mso-margin-top-alt:auto;mso-margin-bottom-a= lt:auto"><span style=3D"font-size:12.0pt;font-family:"Times New Roman&= quot;,serif">If multiple networks exist on a host and the gateways are not = defined, return traffic will be routed through the default gateway, which may not reach the intended destination. This would = result in users being unable to ping the host.<o:p></o:p></span></p> <p class=3D"MsoNormal" style=3D"mso-margin-top-alt:auto;mso-margin-bottom-a= lt:auto"><span style=3D"font-size:12.0pt;font-family:"Times New Roman&= quot;,serif">oVirt handles multiple gateways automatically whenever an inte= rface goes up or down.<o:p></o:p></span></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> </div> </body> </html> --_000_CY4PR12MB1798A464096A4DD2D6F8C105AB800CY4PR12MB1798namp_--

2 5

4.2.3 -- No Snapshot Restore on GUI?
by mrnervus＠gmail.com 13 May '18

13 May '18

Struggling to identify where on the GUI I can navigate to in order to perform a snapshot restore. Is this functionality not available anymore?

1 0

Is PostgreSQL 9.5 required now as of oVirt 4.2?
by Lacey Powers 13 May '18

13 May '18

Hi All, I have a setup of oVirt on 4.1 that has been working brilliantly for over a year, serving the production workloads at my dayjob without complaint. Originally, I had set it up with a custom PostgreSQL version, 9.6, from the PGDG repositories, since the suggested 9.2 was already quite old, and it allowed me to keep consistent versions of PostgreSQL across all the infrastructure I have. Now that I am trying to upgrade to oVirt 4.2, when I run engine-setup per the directions in the release notes documentation, engine-setup insists on PostgreSQL 9.5 from Software Collections, comparing the postgresql versions and then aborting. I don't see a way to tell it that I have a different running version of PostgreSQL that's greater than 9.5 already. Does this mean that no other versions than 9.5 are supported, and I need to downgrade and use the Software Collections version exclusively? Or is there a custom setting that I am missing that will enable me to continue using the 9.6 install I already have. Thank you for your time. Best, Lacey

2 2

Hosted Engine dependency issue
by Peter Harman 12 May '18

12 May '18

Hello, I am new to Ovirt (and linux) , I successfully installed a working hosted engine twice but am now running into a dependency issue. I keep getting the below message: Error: Package: cockpit-storaged-160-1.el7.centos.noarch (extras) Requires: storaged-iscsi >= 2.1.1 Available: storaged-iscsi-2.5.2-2.el7.x86_64 (ovirt-4.2-centos-ovirt42) storaged-iscsi = 2.5.2-2.el7 Available: storaged-iscsi-2.5.2-4.el7.x86_64 (extras) storaged-iscsi = 2.5.2-4.el7 Error: Package: cockpit-storaged-160-1.el7.centos.noarch (extras) Requires: storaged >= 2.1.1 Available: storaged-2.5.2-2.el7.x86_64 (ovirt-4.2-centos-ovirt42) storaged = 2.5.2-2.el7 Available: storaged-2.5.2-4.el7.x86_64 (extras) storaged = 2.5.2-4.el7 Error: Package: cockpit-storaged-160-1.el7.centos.noarch (extras) Requires: storaged-lvm2 >= 2.1.1 Available: storaged-lvm2-2.5.2-2.el7.x86_64 (ovirt-4.2-centos-ovirt42) storaged-lvm2 = 2.5.2-2.el7 Available: storaged-lvm2-2.5.2-4.el7.x86_64 (extras) storaged-lvm2 = 2.5.2-4.el7 I wiped the machine and tried again with no luck. Does anybody know what I am doing wrong? Peter Harman - Systems and Safety Cordinator | Homeyer Precision Manufacturing [Description: C:\Users\gruether\AppData\Local\Temp\Temp1_Homeyer Logo (2).zip\Homeyer Logo\Homeyer Logo.jpg] 16051 State Hwy 47, Marthasville, MO 63357| E pharman(a)homeyertool.com |<mailto:pharman@homeyertool.com%20%7C> P 636.433.2244 | F 636.433.5257

2 1

ONN v4.2.3 Hosted Engine Deployment - Auto addition of Gluster Hosts
by glenn.farmer＠netfortris.com 12 May '18

12 May '18

The new Ovirt Node installation script in v4.2.3 automatically adds the gluster hosts after initial hosted engine setup. This caused major problems as I had used different FQDNs on a different VLAN to initially setup my gluster nodes [to isolate storage traffic] - but then put them onto the "ovirtmgmt" network. Because they were gluster nodes - I could not remove them from the ovirtmgmt network to re-install on the proper management VLAN. I recommend removing the auto-installation of the other gluster nodes - or at least provide an option to decline the automatic addition of the other nodes.

2 1