- Users - oVirt List Archives

simple virtual disk moving
by paf1＠email.cz 11 May '15

11 May '15

This is a multi-part message in MIME format. --------------030409070103030603070200 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 7bit hello, would I explicitly define interface for only disk moving ?? Move process takes the first interface from list ( VM assigned ), but any interface for moving virtuals ( explicitly defined ). eg. VM moving from A to B - it takes interface defined for moving ( "movingLAN" ) but moving only simple disk of VM from A to B - it takes "default" interface from list of assigned LANs any idea ?? regs. Pavel --------------030409070103030603070200 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: 8bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=utf-8"> </head> <body text="#000066" bgcolor="#FFFFFF"> <span> hello, would I explicitly define interface for only disk moving ??<br> <br> Move process takes the first interface from list ( VM assigned ), but any interface for moving virtuals ( explicitly defined ).<br> <br> eg.<br> VM moving from A to B - it takes interface defined for moving ( "movingLAN" ) <br> but<br> moving only simple disk of VM from A to B - it takes "default" interface from list of assigned LANs<br> <br> any idea ??<br> regs.<br> Pavel<br> </span> </body> </html> --------------030409070103030603070200--

2 1

disk moving
by paf1＠email.cz 11 May '15

11 May '15

This is a multi-part message in MIME format. --------------060306090200030905050305 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 7bit hello, would I explicitly define interface for only disk moving ?? reg. Pa. --------------060306090200030905050305 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=utf-8"> </head> <body text="#000066" bgcolor="#FFFFFF"> <span> hello, would I explicitly define interface for only disk moving ??<br> <br> reg.<br> Pa.<br> </span> </body> </html> --------------060306090200030905050305--

1 0

Ovirt fails to import Windows 8 & 2012 VM's using virt-v2v-1.28.1-1.28
by Tim Macy 11 May '15

11 May '15

I am unable to import VM's migrated with virt-v2v-1.28.1-1.28.el7.x86_64 / libguestfs-1.28.1-1.28.el7.x86_64. There is a virt-v2v bug on this, but it is identified as a oVirt issue - https://bugzilla.redhat.com/show_bug.cgi?id=1213701 Is there a scheduled release/fix for this issue? Thank you, Tim Macy

2 1

oVirt workshop and training at our local Linux/Open Source users group
by John Joseph 11 May '15

11 May '15

Hi All, Like to share the info. I have been evaluating and playing around oVirt, I am also going to do some marketing for the same. Arranged a FREE workshop and training for oVirt at our local linux/open source group OES-Emirates http://www.meetup.com/oes-emirates Thanks Joseph John

2 1

Directly connect NIC or other cards to VM?
by David Smith 11 May '15

11 May '15

Is there a way to directly connect a specific device (ie, NIC) to a particular VM? I've figured out how to map a specific network interface to a VM, thats one step, but in the end I may need direct access to the PCI device itself. Second to that, for network interfaces mapped to a particular VM, is there a way for the VM to be able to properly detect physical link state of that interface? Right now that's a 'configurable option' inside network interface settings on the VM in the manager (ie, plugged, not plugged, and link state up /down) Thanks, David

6 7

using Network_Custom_Properties for firewalld zone?
by Jorick Astrego 11 May '15

11 May '15

This is a multi-part message in MIME format. --------------030704060004040008010802 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Hi=2C Trying to add the ZONE field to the NIC=27s in oVirt as I=27m trying to use= Firewalld instead of iptables=2E Manually it works fine but when I try to set a custom property=2C it doesn=27t apply=2E http=3A//www=2Eovirt=2Eorg/Features/Network=5FCustom=5FProperties I can=27t figure out if this should work or I should use a different method= =2E Met vriendelijke groet=2C With kind regards=2C Jorick Astrego Netbulae Virtualization Experts=20 ---------------- =09Tel=3A 053 20 30 270 =09info=40netbulae=2Eeu =09Staalsteden 4-3A =09KvK= 08198180 =09Fax=3A 053 20 30 271 =09www=2Enetbulae=2Eeu =097547 TA Enschede =09BTW= NL821234584B01 ---------------- --------------030704060004040008010802 Content-Type: text/html; charset="utf-8" Content-Transfer-Encoding: quoted-printable =3Chtml=3E =3Chead=3E =3Cmeta http-equiv=3D=22content-type=22 content=3D=22text/html=3B chars= et=3Dutf-8=22=3E =3C/head=3E =3Cbody bgcolor=3D=22=23FFFFFF=22 text=3D=22=23000000=22=3E Hi=2C=3Cbr=3E =3Cbr=3E Trying to add the ZONE field to the NIC=27s in oVirt as I=27m trying to= use Firewalld instead of iptables=2E=3Cbr=3E =3Cbr=3E Manually it works fine but when I try=C2=A0 to set a custom property=2C= it doesn=27t apply=2E=3Cbr=3E =3Cbr=3E =3Cblockquote=3E=3Ca class=3D=22moz-txt-link-freetext=22 href=3D=22http= =3A//www=2Eovirt=2Eorg/Features/Network=5FCustom=5FProperties=22=3Ehttp=3A/= /www=2Eovirt=2Eorg/Features/Network=5FCustom=5FProperties=3C/a=3E=3Cbr=3E= =3Cbr=3E =3C/blockquote=3E I can=27t figure out if this should work or I should use a different method=2E=3Cbr=3E =3Cbr=3E =3Cbr=3E =3Cbr=3E =3Cbr=3E =20= =3CBR /=3E =3CBR /=3E =3Cb style=3D=22color=3A=23604c78=22=3E=3C/b=3E=3Cbr=3E=3Cspan style=3D=22c= olor=3A=23604c78=3B=22=3E=3Cfont color=3D=22000000=22=3E=3Cspan style=3D=22= mso-fareast-language=3Aen-gb=3B=22 lang=3D=22NL=22=3EMet vriendelijke groet= =2C With kind regards=2C=3Cbr=3E=3Cbr=3E=3C/span=3EJorick Astrego=3C/font= =3E=3C/span=3E=3Cb style=3D=22color=3A=23604c78=22=3E=3Cbr=3E=3Cbr=3ENetbul= ae Virtualization Experts =3C/b=3E=3Cbr=3E=3Chr style=3D=22border=3Anone=3B= border-top=3A1px solid =23ccc=3B=22=3E=3Ctable style=3D=22width=3A 522px=22= =3E=3Ctbody=3E=3Ctr=3E=3Ctd style=3D=22width=3A 130px=3Bfont-size=3A 10px= =22=3ETel=3A 053 20 30 270=3C/td=3E =3Ctd style=3D=22width=3A 130px=3Bf= ont-size=3A 10px=22=3Einfo=40netbulae=2Eeu=3C/td=3E =3Ctd style=3D=22wid= th=3A 130px=3Bfont-size=3A 10px=22=3EStaalsteden 4-3A=3C/td=3E =3Ctd sty= le=3D=22width=3A 130px=3Bfont-size=3A 10px=22=3EKvK 08198180=3C/td=3E=3C/tr= =3E=3Ctr=3E =3Ctd style=3D=22width=3A 130px=3Bfont-size=3A 10px=22=3EFax= =3A 053 20 30 271=3C/td=3E =3Ctd style=3D=22width=3A 130px=3Bfont-size= =3A 10px=22=3Ewww=2Enetbulae=2Eeu=3C/td=3E =3Ctd style=3D=22width=3A 130= px=3Bfont-size=3A 10px=22=3E7547 TA Enschede=3C/td=3E =3Ctd style=3D=22w= idth=3A 130px=3Bfont-size=3A 10px=22=3EBTW NL821234584B01=3C/td=3E=3C/tr=3E= =3C/tbody=3E=3C/table=3E=3Cbr=3E=3Chr style=3D=22border=3Anone=3Bborder-top= =3A1px solid =23ccc=3B=22=3E=3CBR /=3E =3C/body=3E =3C/html=3E --------------030704060004040008010802--

3 2

Invito aggiornato: oVirt 3.6.0 Alpha Release Test Day - mar 2015-05-26 (oVirt schedule)
by sandro.bonazzola＠gmail.com 11 May '15

11 May '15

L'evento è stato modificato. Titolo: oVirt 3.6.0 Alpha Release Test Day Quando: mar 2015-05-26 (modificato) Calendario: oVirt schedule Chi: * Sandro Bonazzola- autore * infra(a)ovirt.org * devel(a)ovirt.org * users(a)ovirt.org Dettagli evento: https://www.google.com/calendar/event?action=VIEW&eid=YWkyYWEzMWUwMnFhajAyZ… Invito da Google Calendar: https://www.google.com/calendar/ Hai ricevuto questo messaggio email di cortesia all'account users(a)ovirt.org perché sei uno dei partecipanti a questo evento. Per disattivare la ricezione di aggiornamenti futuri per questo evento, rifiuta l'evento. In alternativa, puoi registrarti per un account Google in https://www.google.com/calendar/ e verificare le impostazioni di notifica per l'intero calendario.

1 0

how to delete the default cluster?
by Nathanaël Blanchet 11 May '15

11 May '15

Hello, I'd like to remove the default cluster, but engine refuses telling me that the blank template is associated to it. The problem is that all my vms (nearly 200) are created on the base of that template, so I can't first remove it. Is there a workaround to do this? -- Nathanaël Blanchet Supervision réseau Pôle Infrastrutures Informatiques 227 avenue Professeur-Jean-Louis-Viala 34193 MONTPELLIER CEDEX 5 Tél. 33 (0)4 67 54 84 55 Fax 33 (0)4 67 54 84 14 blanchet(a)abes.fr

2 1

Maximum VM memory
by Christophe TREFOIS 11 May '15

11 May '15

--_000_803F768AF2CE4F0DBDB8069A62C5BEB5unilu_ Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: base64 RGVhciBvdmlydCB1c2VycywNCg0KV2UgaGF2ZSBhIHNwZWNpYWwgbWFjaGluZSB3aGljaCBoYXMg MSBUQiBSQU0uDQoNClRoZSBpZGVhIGlzIHRvIGhhdmUgMy00IFZNcyBvbiB0aGVyZSB3aGljaCBz aG91bGQgYmUgc3BsaXQgbGlrZSA4NS81LzUvNSAlIG9mIHRvdGFsIFJBTS4NCg0KSSBoYXZlIHRo cmVlIHF1ZXN0aW9uczoNCg0KMS4gSXMgdGhlcmUgYW55IHJlYXNvbiBub3QgdG8gcHV0IHVwIGEg Vk0gd2l0aCBzbyBtdWNoIFJBTQ0KDQoyLiBIb3cgY2FuIEkgaW5jcmVhc2UgdGhlIG1heGltdW0g UkFNIHNpemUgZm9yIDY0IGJpdCBWTXM/DQoNCjMuIEhvdyBjYW4gSSBjcmVhdGUgYSBuZXcgT1Mg Zm9yIHRoZSBWTSBjcmVhdGlvbiB0aGF0IHN1cHBvcnRzID4gMTYgR0IgPyAoUmlnaHQgbm93IGkg aGF2ZSB0byBjaG9vc2UgUkhFTCA2NCBiaXRzIGV2ZW4gZm9yIERlYmlhbiBzeXN0ZW1zKQ0KDQpU aGFuayB5b3UgZm9yIHlvdXIgaGVscCwNCg0K4oCUDQpDaHJpc3RvcGhlDQoNCg0KDQo= --_000_803F768AF2CE4F0DBDB8069A62C5BEB5unilu_ Content-Type: text/html; charset="utf-8" Content-ID: <67A8A10803FFAE41B67512C9F7DDB1E5(a)uni.lux> Content-Transfer-Encoding: base64 PGh0bWw+DQo8aGVhZD4NCjxtZXRhIGh0dHAtZXF1aXY9IkNvbnRlbnQtVHlwZSIgY29udGVudD0i dGV4dC9odG1sOyBjaGFyc2V0PXV0Zi04Ij4NCjwvaGVhZD4NCjxib2R5IHN0eWxlPSJ3b3JkLXdy YXA6IGJyZWFrLXdvcmQ7IC13ZWJraXQtbmJzcC1tb2RlOiBzcGFjZTsgLXdlYmtpdC1saW5lLWJy ZWFrOiBhZnRlci13aGl0ZS1zcGFjZTsiIGNsYXNzPSIiPg0KRGVhciBvdmlydCB1c2VycywNCjxk aXYgY2xhc3M9IiI+PGJyIGNsYXNzPSIiPg0KPC9kaXY+DQo8ZGl2IGNsYXNzPSIiPldlIGhhdmUg YSBzcGVjaWFsIG1hY2hpbmUgd2hpY2ggaGFzIDEgVEIgUkFNLjwvZGl2Pg0KPGRpdiBjbGFzcz0i Ij48YnIgY2xhc3M9IiI+DQo8L2Rpdj4NCjxkaXYgY2xhc3M9IiI+VGhlIGlkZWEgaXMgdG8gaGF2 ZSAzLTQgVk1zIG9uIHRoZXJlIHdoaWNoIHNob3VsZCBiZSBzcGxpdCBsaWtlIDg1LzUvNS81ICUg b2YgdG90YWwgUkFNLjwvZGl2Pg0KPGRpdiBjbGFzcz0iIj48YnIgY2xhc3M9IiI+DQo8L2Rpdj4N CjxkaXYgY2xhc3M9IiI+SSBoYXZlIHRocmVlIHF1ZXN0aW9uczo8L2Rpdj4NCjxkaXYgY2xhc3M9 IiI+PGJyIGNsYXNzPSIiPg0KPC9kaXY+DQo8ZGl2IGNsYXNzPSIiPjEuIElzIHRoZXJlIGFueSBy ZWFzb24gbm90IHRvIHB1dCB1cCBhIFZNIHdpdGggc28gbXVjaCBSQU0mbmJzcDs8L2Rpdj4NCjxk aXYgY2xhc3M9IiI+PGJyIGNsYXNzPSIiPg0KPC9kaXY+DQo8ZGl2IGNsYXNzPSIiPjIuIEhvdyBj YW4gSSBpbmNyZWFzZSB0aGUgbWF4aW11bSBSQU0gc2l6ZSBmb3IgNjQgYml0IFZNcz88L2Rpdj4N CjxkaXYgY2xhc3M9IiI+PGJyIGNsYXNzPSIiPg0KPC9kaXY+DQo8ZGl2IGNsYXNzPSIiPjMuIEhv dyBjYW4gSSBjcmVhdGUgYSBuZXcgT1MgZm9yIHRoZSBWTSBjcmVhdGlvbiB0aGF0IHN1cHBvcnRz ICZndDsgMTYgR0IgPyAoUmlnaHQgbm93IGkgaGF2ZSB0byBjaG9vc2UgUkhFTCA2NCBiaXRzIGV2 ZW4gZm9yIERlYmlhbiBzeXN0ZW1zKTwvZGl2Pg0KPGRpdiBjbGFzcz0iIj48YnIgY2xhc3M9IiI+ DQo8L2Rpdj4NCjxkaXYgY2xhc3M9IiI+VGhhbmsgeW91IGZvciB5b3VyIGhlbHAsPC9kaXY+DQo8 ZGl2IGNsYXNzPSIiPjxiciBjbGFzcz0iIj4NCjwvZGl2Pg0KPGRpdiBjbGFzcz0iIj7igJQ8L2Rp dj4NCjxkaXYgY2xhc3M9IiI+Q2hyaXN0b3BoZTxiciBjbGFzcz0iIj4NCjxkaXYgYXBwbGUtY29u dGVudC1lZGl0ZWQ9InRydWUiIGNsYXNzPSIiPg0KPG1ldGEgbmFtZT0iZm9ybWF0LWRldGVjdGlv biIgY29udGVudD0idGVsZXBob25lPW5vIiBjbGFzcz0iIj4NCjxwIHN0eWxlPSJmb250LWZhbWls eTogQXJpYWwsIHNhbnMtc2VyaWY7IGZvbnQtc2l6ZTogMTBwdDsgbGluZS1oZWlnaHQ6IDE2cHg7 IGNvbG9yOiByZ2IoMzMsIDMzLCAzMyk7IiBjbGFzcz0iIj4NCiZuYnNwOzwvcD4NCjwvZGl2Pg0K PGJyIGNsYXNzPSIiPg0KPC9kaXY+DQo8L2JvZHk+DQo8L2h0bWw+DQo= --_000_803F768AF2CE4F0DBDB8069A62C5BEB5unilu_--

3 3

Is it mandatory to have fixed IP addres for eth0, for installtion of OVirt
by John Joseph 10 May '15

10 May '15

Dear All, As for experimental purpose I have done OVirt installation on CentOS 6.6 and it was success. Till now before installation of OVirt, I used to make the eth0 IP permanent and then install Now I have need to take the machine to different places to demo and discuss about the installation, In this case I need to keep my eth0 on DHCP. Was wondering whether the fixed IP address of eth0 is mandatory or can I use dhcp for the host machine, before installing Ovirt thanks Joseph John

3 3

Clone a Snapshot with REST
by Jon Disterhoft 08 May '15

08 May '15

Hello All, I'm trying to create VM backups through the REST API using curl. My understanding of this flow is to create a snapshot, clone the snapshot, then export the clone machine. I've got the snapshot part working: curl -v --insecure -u "admin@internal:<mypass>" -H "Content-type: application/xml" -X POST https://<myserver>/api/vms/e7d53832-b1ba-4f6e-8218-6116a0b4ea53/snapshots -d ' <snapshot> <vm id="e7d53832-b1ba-4f6e-8218-6116a0b4ea53"/> <description>TEST_SNAPSHOT</description> <disks> <disk id="057c80e5-701f-4dcf-a86d-a89672ff606a"/> </disks> </snapshot>' However, I can't figure out how to get the clone portion working. I've found a reference to it, but am unable to make it work: > To clone a VM from snapshot, POST to /api/vms : > <vm> > ... > <snapshots> > <snapshot id={snapshot_id}/> > </snapshots> > ... > </vm> So the question is, how do you clone a snapshot with the REST API? Also, is there a complete listing anywhere of all features/action supported by the REST API?

1 0

Physical network on "New Logical Network" dialog
by Jorick Astrego 08 May '15

08 May '15

This is a multi-part message in MIME format. --------------020205060308070107080609 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Hi=2C When I try to create a new logical network on our neutron provider=2C there is a field for =22Physical Network=22 Export Create on external provider External Provider Physical Network What should I specify=3F The bond or the bridge of the host=3F I searched the documentation but can=27t find any info=2E Met vriendelijke groet=2C With kind regards=2C Jorick Astrego Netbulae Virtualization Experts=20 ---------------- =09Tel=3A 053 20 30 270 =09info=40netbulae=2Eeu =09Staalsteden 4-3A =09KvK= 08198180 =09Fax=3A 053 20 30 271 =09www=2Enetbulae=2Eeu =097547 TA Enschede =09BTW= NL821234584B01 ---------------- --------------020205060308070107080609 Content-Type: text/html; charset="utf-8" Content-Transfer-Encoding: quoted-printable =3Chtml=3E =3Chead=3E =3Cmeta http-equiv=3D=22content-type=22 content=3D=22text/html=3B chars= et=3Dutf-8=22=3E =3C/head=3E =3Cbody bgcolor=3D=22=23FFFFFF=22 text=3D=22=23000000=22=3E Hi=2C=3Cbr=3E =3Cbr=3E When I try to create a new logical network on our neutron provider=2C= there is a field for =22Physical Network=22=3Cbr=3E =3Cbr=3E =3Cbr=3E =3Cblockquote=3E =3Cdiv class=3D=22gwt-Label GIVOUXICPAD=22=3EExport=3C/div=3E =3Cdiv aria-hidden=3D=22false=22 class=3D=22GIVOUXICIBC avw=5Fwrapper= =5Fpfly=5Ffix=22=3E =3Cdiv style=3D=22float=3A left=3B=22 class=3D=22GIVOUXICCBC avw=5FcontentWidget=5Fpfly=5Ffix=22=3E=3Cspan style=3D=22border-w= idth=3A 1px=3B border-style=3A none=3B padding=3A 5px=3B border-color=3A gray= =3B width=3A 100=25=3B=22 class=3D=22gwt-CheckBox=22=3E=3Cinput class=3D=22cbe=5Fcheckbox=5Fpfly=5Ffix=22 tabindex=3D=225=22= id=3D=22gwt-uid-9804=22 value=3D=22on=22 type=3D=22checkbox= =22=3E=3Clabel class=3D=22cbe=5Flabel=5Fpfly=5Ffix=22 for=3D=22gwt-uid-9804= =22=3ECreate on external provider=3C/label=3E=3C/span=3E=3C/div=3E =3C/div=3E =3Cdiv aria-hidden=3D=22false=22 class=3D=22GIVOUXICIBC avw=5Fwrapper= =5Fpfly=5Ffix GIVOUXICLAD=22=3E=3Clabel for=3D=22gwt-uid-9800=22 class=3D=22GIVOU= XICDBC avw=5Flabel=5Fpfly=5Ffix GIVOUXICEBC=22=3EExternal Provider=3C/la= bel=3E =3C/div=3E =3Cdiv aria-hidden=3D=22false=22 class=3D=22GIVOUXICIBC avw=5Fwrapper= =5Fpfly=5Ffix GIVOUXICLAD=22=3E =3C/div=3E =3Clabel for=3D=22gwt-uid-9835=22 class=3D=22GIVOUXICDBC avw=5Flabel= =5Fpfly=5Ffix GIVOUXICEBC=22=3EPhysical Network=3C/label=3E=3Cbr=3E =3C/blockquote=3E =3Cbr=3E What should I specify=3F The bond or the bridge of the host=3F=3Cbr=3E= =3Cbr=3E I searched the documentation but can=27t find any info=2E=3Cbr=3E =20= =3CBR /=3E =3CBR /=3E =3Cb style=3D=22color=3A=23604c78=22=3E=3C/b=3E=3Cbr=3E=3Cspan style=3D=22c= olor=3A=23604c78=3B=22=3E=3Cfont color=3D=22000000=22=3E=3Cspan style=3D=22= mso-fareast-language=3Aen-gb=3B=22 lang=3D=22NL=22=3EMet vriendelijke groet= =2C With kind regards=2C=3Cbr=3E=3Cbr=3E=3C/span=3EJorick Astrego=3C/font= =3E=3C/span=3E=3Cb style=3D=22color=3A=23604c78=22=3E=3Cbr=3E=3Cbr=3ENetbul= ae Virtualization Experts =3C/b=3E=3Cbr=3E=3Chr style=3D=22border=3Anone=3B= border-top=3A1px solid =23ccc=3B=22=3E=3Ctable style=3D=22width=3A 522px=22= =3E=3Ctbody=3E=3Ctr=3E=3Ctd style=3D=22width=3A 130px=3Bfont-size=3A 10px= =22=3ETel=3A 053 20 30 270=3C/td=3E =3Ctd style=3D=22width=3A 130px=3Bf= ont-size=3A 10px=22=3Einfo=40netbulae=2Eeu=3C/td=3E =3Ctd style=3D=22wid= th=3A 130px=3Bfont-size=3A 10px=22=3EStaalsteden 4-3A=3C/td=3E =3Ctd sty= le=3D=22width=3A 130px=3Bfont-size=3A 10px=22=3EKvK 08198180=3C/td=3E=3C/tr= =3E=3Ctr=3E =3Ctd style=3D=22width=3A 130px=3Bfont-size=3A 10px=22=3EFax= =3A 053 20 30 271=3C/td=3E =3Ctd style=3D=22width=3A 130px=3Bfont-size= =3A 10px=22=3Ewww=2Enetbulae=2Eeu=3C/td=3E =3Ctd style=3D=22width=3A 130= px=3Bfont-size=3A 10px=22=3E7547 TA Enschede=3C/td=3E =3Ctd style=3D=22w= idth=3A 130px=3Bfont-size=3A 10px=22=3EBTW NL821234584B01=3C/td=3E=3C/tr=3E= =3C/tbody=3E=3C/table=3E=3Cbr=3E=3Chr style=3D=22border=3Anone=3Bborder-top= =3A1px solid =23ccc=3B=22=3E=3CBR /=3E =3C/body=3E =3C/html=3E --------------020205060308070107080609--

1 0

Re: [ovirt-users] ovirt-webadmin is too slow
by Markus Stockhausen 08 May '15

08 May '15

------=_NextPartTM-000-42b8c835-53ec-4913-acc1-19b750f482e4 Content-Type: multipart/alternative; boundary="_000_ab0a407e07974f7e843146edbdd88ddfemailandroidcom_" --_000_ab0a407e07974f7e843146edbdd88ddfemailandroidcom_ Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: base64 RGllIHlvdSB0cnkgdG8gaW5jcmVhc2UgcmVmcmVzaCBpbnRlcnZhbCB0byA2MC4gU2VlbWVkIHRv IGhlbHAgZm9yIG1lLCBlc3BlY2lhbGx5IGluIFdBTiBjb25uZWN0Lg0KDQpNYXJrdXMNCg0KQW0g MDYuMDUuMjAxNSAzOjQ4IG5hY2htLiBzY2hyaWViIGxvZnllciA8bG9meWVyQGxvZnllci5vcmc+ Og0KSSd2ZSBpbnN0YWxsZWQgb3ZpcnQtZW5naW5lLTMuNS4xIGFuZCBjcmVhdGVkIGFib3V0IDEy MCBWTXMuDQpFdmVyeXRpbWUgSSBkaWQgYSBtdWx0aS1zZWxlY3Rpb24gaXQgd2lsbCB0YWtlIGEg bm90LXNvLXNob3J0IHRpbWUgd2l0aCBub3Qtc28tZnJpZW5kbHkgdXNlciBleHBlcmllbmNlKHNl ZW1zIHRvIGJlIHN0dWNrIGJ5IHNvbWV0aGluZykuDQpJJ20gdXNpbmcgRmlyZWZveDM3IGluIFhQ IHdpdGggMkdCIG1lbW9yeS4NCg0KV2lsbCB0aGVyZSBiZSBzb21lIG9wdGltaXphdGlvbiBvcHRp b24/DQo= --_000_ab0a407e07974f7e843146edbdd88ddfemailandroidcom_ Content-Type: text/html; charset="utf-8" Content-ID: <0AA68313E16B824A99CA4E4223A52644(a)collogia.de> Content-Transfer-Encoding: base64 PGh0bWw+DQo8aGVhZD4NCjxtZXRhIGh0dHAtZXF1aXY9IkNvbnRlbnQtVHlwZSIgY29udGVudD0i dGV4dC9odG1sOyBjaGFyc2V0PXV0Zi04Ij4NCjwvaGVhZD4NCjxib2R5Pg0KPHAgZGlyPSJsdHIi PkRpZSB5b3UgdHJ5IHRvIGluY3JlYXNlIHJlZnJlc2ggaW50ZXJ2YWwgdG8gNjAuIFNlZW1lZCB0 byBoZWxwIGZvciBtZSwgZXNwZWNpYWxseSBpbiBXQU4gY29ubmVjdC48L3A+DQo8cCBkaXI9Imx0 ciI+TWFya3VzPC9wPg0KPGRpdiBjbGFzcz0iZ21haWxfcXVvdGUiPkFtIDA2LjA1LjIwMTUgMzo0 OCBuYWNobS4gc2NocmllYiBsb2Z5ZXIgJmx0O2xvZnllckBsb2Z5ZXIub3JnJmd0Ozo8YnIgdHlw ZT0iYXR0cmlidXRpb24iPg0KPGJsb2NrcXVvdGUgY2xhc3M9InF1b3RlIiBzdHlsZT0ibWFyZ2lu OjAgMCAwIC44ZXg7Ym9yZGVyLWxlZnQ6MXB4ICNjY2Mgc29saWQ7cGFkZGluZy1sZWZ0OjFleCI+ DQo8ZGl2IHN0eWxlPSJmb250LXNpemU6MTBwdDtmb250LWZhbWlseTonYXJpYWwnIj5JJ3ZlIGlu c3RhbGxlZCBvdmlydC1lbmdpbmUtMy41LjEgYW5kIGNyZWF0ZWQgYWJvdXQgMTIwIFZNcy4NCjxk aXY+RXZlcnl0aW1lIEkgZGlkIGEgbXVsdGktc2VsZWN0aW9uIGl0IHdpbGwgdGFrZSBhIG5vdC1z by1zaG9ydCB0aW1lIHdpdGggbm90LXNvLWZyaWVuZGx5IHVzZXIgZXhwZXJpZW5jZShzZWVtcyB0 byBiZSBzdHVjayBieSBzb21ldGhpbmcpLjwvZGl2Pg0KPGRpdj5JJ20gdXNpbmcgRmlyZWZveDM3 IGluIFhQIHdpdGggMkdCIG1lbW9yeS48L2Rpdj4NCjxkaXY+PGJyPg0KPC9kaXY+DQo8ZGl2Pldp bGwgdGhlcmUgYmUgc29tZSBvcHRpbWl6YXRpb24gb3B0aW9uPzwvZGl2Pg0KPC9kaXY+DQo8L2Js b2NrcXVvdGU+DQo8L2Rpdj4NCjwvYm9keT4NCjwvaHRtbD4NCg== --_000_ab0a407e07974f7e843146edbdd88ddfemailandroidcom_-- ------=_NextPartTM-000-42b8c835-53ec-4913-acc1-19b750f482e4 Content-Type: text/plain; name="InterScan_Disclaimer.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="InterScan_Disclaimer.txt" **************************************************************************** Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail ist nicht gestattet. Über das Internet versandte E-Mails können unter fremden Namen erstellt oder manipuliert werden. Deshalb ist diese als E-Mail verschickte Nachricht keine rechtsverbindliche Willenserklärung. Collogia Unternehmensberatung AG Ubierring 11 D-50678 Köln Vorstand: Kadir Akin Dr. Michael Höhnerbach Vorsitzender des Aufsichtsrates: Hans Kristian Langva Registergericht: Amtsgericht Köln Registernummer: HRB 52 497 This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden. e-mails sent over the internet may have been written under a wrong name or been manipulated. That is why this message sent as an e-mail is not a legally binding declaration of intention. Collogia Unternehmensberatung AG Ubierring 11 D-50678 Köln executive board: Kadir Akin Dr. Michael Höhnerbach President of the supervisory board: Hans Kristian Langva Registry office: district court Cologne Register number: HRB 52 497 **************************************************************************** ------=_NextPartTM-000-42b8c835-53ec-4913-acc1-19b750f482e4--

2 1

Local Storage
by Marcin Fabiańczyk 08 May '15

08 May '15

------=_Part_432399_1800004496.1430477334386 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Hello I have create DC with a shared storage but I would like also add my servers local resources . I t is possible in ovirt - hypervisior ? Regards. MF ------=_Part_432399_1800004496.1430477334386 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable <html><body><div style=3D"font-family: arial, helvetica, sans-serif; font-s= ize: 12pt; color: #000000"><div>Hello<br></div><div><br data-mce-bogus=3D"1= "></div><div><span id=3D"result_box" class=3D"" lang=3D"en"><span class=3D"= hps">I have create</span> <span class=3D"hps">DC</span> <span class=3D"hps"= >with</span> <span class=3D"hps">a shared</span> <span class=3D"hps">storag= e</span> <span class=3D"hps">but I would</span> like <span class=3D"hps"></= span>also add <span>my servers</span> <span class=3D"hps">local resources</= span><span>.</span><span class=3D"hps"></span> I<span class=3D"hps">t is po= ssible in</span> <span class=3D"hps">ovirt</span><span class=3D"atn">-</spa= n><span class=3D"">hypervisior</span><span class=3D"">?</span></span></div>= <div><span class=3D"" lang=3D"en"><span class=3D""><br data-mce-bogus=3D"1"= ></span></span></div><div><span class=3D"" lang=3D"en"><span class=3D"">Reg= ards.<br data-mce-bogus=3D"1"></span></span></div><div><span class=3D"" lan= g=3D"en"><span class=3D"">MF<br data-mce-bogus=3D"1"></span></span></div><d= iv> <br data-mce-bogus=3D"1"></div></div></body></html> ------=_Part_432399_1800004496.1430477334386--

4 4

Adding existing hosts to a new ovirt engine.
by Jan Stomphorst 08 May '15

08 May '15

--_000_EC7CBF9F45A2E5428F6F93B025F3CB4F043081A94B6CNLNIE1M001p_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hi guys, My engine died and I have hosts with virtual machines running. Now I want t= o add the running host to a new engine. Without disturbing the virtual mach= ines on the host. If I add an host it tries to install the ovirt packages, but there already = running. How do I resolve this.. :) Regards, Jan Stomphorst --_000_EC7CBF9F45A2E5428F6F93B025F3CB4F043081A94B6CNLNIE1M001p_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"><head><meta http-equiv=3DContent-Type content= =3D"text/html; charset=3Dus-ascii"><meta name=3DGenerator content=3D"Micros= oft Word 14 (filtered medium)"><style></style></head><body lang=3DNL link=3Dblue vlink= =3Dpurple><div class=3DWordSection1><p class=3DMsoNormal><span lang=3DEN-US= style=3D'font-size:10.0pt;font-family:"Verdana","sans-serif";color:black'>= Hi guys,<o:p></o:p></span></p><p class=3DMsoNormal><span lang=3DEN-US style= =3D'font-size:10.0pt;font-family:"Verdana","sans-serif";color:black'><o:p>&= nbsp;</o:p></span></p><p class=3DMsoNormal><span lang=3DEN-US style=3D'font= -size:10.0pt;font-family:"Verdana","sans-serif";color:black'>My engine died= and I have hosts with virtual machines running. Now I want to add the runn= ing host to a new engine. Without disturbing the virtual machines on the ho= st.<o:p></o:p></span></p><p class=3DMsoNormal><span lang=3DEN-US style=3D'f= ont-size:10.0pt;font-family:"Verdana","sans-serif";color:black'>If I add an= host it tries to install the ovirt packages, but there already running.<o:= p></o:p></span></p><p class=3DMsoNormal><span lang=3DEN-US style=3D'font-si= ze:10.0pt;font-family:"Verdana","sans-serif";color:black'><o:p> </o:p>= </span></p><p class=3DMsoNormal><span lang=3DEN-US style=3D'font-size:10.0p= t;font-family:"Verdana","sans-serif";color:black'>How do I resolve this.. <= /span><span lang=3DEN-US style=3D'font-size:10.0pt;font-family:Wingdings;co= lor:black'>J</span><span lang=3DEN-US style=3D'font-size:10.0pt;font-family= :"Verdana","sans-serif";color:black'><o:p></o:p></span></p><p class=3DMsoNo= rmal><span lang=3DEN-US style=3D'font-size:10.0pt;font-family:"Verdana","sa= ns-serif";color:black'><o:p> </o:p></span></p><p class=3DMsoNormal><sp= an style=3D'font-size:10.0pt;font-family:"Verdana","sans-serif";color:black= '>Regards,<o:p></o:p></span></p><p class=3DMsoNormal><span style=3D'font-si= ze:10.0pt;font-family:"Verdana","sans-serif";color:black;mso-fareast-langua= ge:NL'>Jan Stomphorst<o:p></o:p></span></p></div></body></html>= --_000_EC7CBF9F45A2E5428F6F93B025F3CB4F043081A94B6CNLNIE1M001p_--

4 3

adding LINKDELAY to ovirtmgmt when vdsm configures it
by Jason Keltz 07 May '15

07 May '15

Hi. Is it possible through engine to specify configuration parameters for network interfaces that must be passed through on initialization? For example, I need em1 and em2 configured with "LINKDELAY=10". I can add it after the fact, but I don't want to do that. I want vdsm to configure the interface with that setup already the first time. Jason.

1 1

Re: [ovirt-users] hosted engine vm network access
by Yedidyah Bar David 07 May '15

07 May '15

(Ccing users list) ----- Original Message ----- > From: "mike" <mike(a)inguera.com> > To: "Yedidyah Bar David" <didi(a)redhat.com> > Sent: Thursday, May 7, 2015 4:16:54 AM > Subject: Re: hosted engine vm network access > > Hello > > > Thank you for your answers. > > i tried everything from the beginning with the same probleme, i can ping > my Centos7 Server but i cannot not have internet access neither to my GW > on the created vm by hosted-engine --deploy. i can ONLY ping my centos 7 > server > > > I have one Centos7 server installed and updated > > 1 NIC eth0 at 192.168.42.114/24 But you wrote below that you have also eth1 ? > > i installed the ovirt repo > > i run hosted-engine, follow the questions, i set bridge at eth0 and set > the FQDN of the vm at hevm.lab.lan (which is present in the /etc/hosts > file of my Centos7 server with ip 192.168.42.116) > > i can see on my Centos7 Server that i have a new interface named > ovirtmgmgt with the the ip previously set for eth0 and now eth0 has no > ip address but i can still ssh to my centos7 serverthrough ovirtmgmt > interface i presume... Indeed - this is a normal linux bridge > > > here is my bridge conf of my centos7 server > > #brctl show > bridge name bridge id STP enabled interfaces > ;vdsmdummy; 8000.000000000000 no > ovirtmgmt 8000.000c29de8495 no eth0 > > > > Once my VM is created (hevm.lab.lan), i connect to it again through vnc > and i set an ip address manualy like: > # ifconfig eth0 192.168.42.116/24 > # route add default gw 192.168.42.254 > > > to resume, i can only ping my centos7 server and no other host on the > same subnet and no internet access. I assume you can only ping the address of the ovirtmgmt bridge (192.168.42.114). Can you ping the address of eth1? > > > i hope i explained my problemin a maner that you could help me. Still not enough details. Where are eth0 and eth1 connected? Please provide the details I asked for below. Thanks! Best regards, > > > sorry for my english > > > thank you for the help. > > > > > > > > > > > > > > > > > On 05/06/2015 07:37 AM, Yedidyah Bar David wrote: > > ----- Original Message ----- > >> From: "mike" <mike(a)inguera.com> > >> To: sbonazzo(a)redhat.com > >> Cc: didi(a)redhat.com > >> Sent: Tuesday, May 5, 2015 7:29:48 PM > >> Subject: hosted engine vm network access > >> > >> Hie. > >> > >> i've been asked to email you instead of asking on the #ovirt channel. > > That's fine, but usually in such cases people are supposed/advised to > > email users(a)ovirt.org, Ccing specific people if needed/relevant :-) > > > >> > >> i have followed this instructions: > >> http://community.redhat.com/blog/2014/10/up-and-running-with-ovirt-3-5/ > >> > >> the only differences are the IP addresse/mapping names of the begining > >> > >> _once i have installed the hosted engine through hosted-engine --deploy, > >> i connect to it using vnc but i cannot have internet access to install > >> the engine from ovirt repo neither ping my Main host_ > >> > >> i have: > >> > >> 192.168.42.116 virt1 virt1.lab.lan nfsmount nfsmount.lab.lan > >> 192.168.42.117 hevm hevm.lab.lan # this is the ip i would like > >> to set for the hosted engine VM > > You mean, you have this in /etc/hosts of all relevant machines? > > > >> > >> on my Main Host cento7, i have > >> > >> eth1-> 192.168.42.116 (managment NIC for ssh access and nfs server) > >> eth0-> with nothing > >> ovirtmgmt-> 192.168.42.114 > > Which includes eth0? What's the output of 'brctl show'? > > > > Are eth0 and eth1 on the same switch/segment? > > > > What's the subnet of each? > > > >> bond0-> with nothing > > That's normal > > > >> > >> can you please help me? > > What do you have on the engine VM? > > > > Can you ssh to the engine from the host? Or the other direction? > > > > Please check both addresses of the host. > > > > I am not sure, but for the engine VM to access 192.168.42.116, you might > > need to add some routing somewhere. > > > > I'd say this isn't related to hosted-engine, but some general networking > > issue. If you fail to diagnose this at this point, you can try to simply > > boot some live cd in a VM (e.g. using virt-install or even qemu directly) > > and debug from there. Once you have it working, start hosted-engine again. > > > > Please check (or post, if you want us to help) all relevant information, > > including the above, and also things such as: > > > > Routing table of host/vm, and of all relevant routers > > > > Do you use dhcp? Does it work? On host/engine? > > > > Did you enable ip forwarding on the host (cat > > /proc/sys/net/ipv4/ip_forward)? > > > > After you try ssh/ping, arp table on host/engine (arp -an) > > > > Check iptables config/logs > > > > Etc. > > > > Good luck. > > > > If you fail to solve this yourself, please Cc users@ with your reply. > > > > Thanks! > > > > Best, > > -- Didi

2 1

Invitation: Office Hours for oVirt Community - Integration @ Wed May 13, 2015 4pm - 5pm (sbonazzo@redhat.com)
by Sandro Bonazzola 07 May '15

07 May '15

You have been invited to the following event. Title: Office Hours for oVirt Community - Integration Following past oVirt Sync Meeting decisions, I'll be around in #ovirt channel trying to answer questions and discussing any cross-team/community-wide issues as needed. When: Wed May 13, 2015 4pm - 5pm Rome Calendar: sbonazzo(a)redhat.com Who: * Sandro Bonazzola - organizer * devel(a)ovirt.org * users(a)ovirt.org Event details: https://www.google.com/calendar/event?action=VIEW&eid=N2FzM3ZpZzltM28ybDJrd… Invitation from Google Calendar: https://www.google.com/calendar/ You are receiving this courtesy email at the account users(a)ovirt.org because you are an attendee of this event. To stop receiving future updates for this event, decline this event. Alternatively you can sign up for a Google account at https://www.google.com/calendar/ and control your notification settings for your entire calendar.

1 0

vdsClient getVGList returned Empty
by like.ma＠cs2c.com.cn 07 May '15

07 May '15

This is a multi-part message in MIME format. ------=_001_NextPart466547553878_=---- Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: base64 SGksIGd1eXMNCkkgaGF2ZSBhIHZkc20gaG9zdCwgd2hlbiBpIHVzZSAidmdzIiBjb21tYW5kLCBp dCB3aWxsIGRpc3BsYXkgMiB2b2x1bWUgZ3JvdXAgd2hpY2ggYWxyZWFkeSBleGlzdC4gQnV0IHdo ZW4gaSB1c2UgInZkc0NsaWVudCAtcyAwIGdldFZHTGlzdCIsIGl0IGRpc3BsYXlzIG5vdGhpbmcu IFRoYXQgbWVhbnMgdmRzbSBjYW5ub3Qgc2VlIHRoZSBleGlzdGVkIHZnLiBXaHk/IERvZXMgYW55 Ym9keSBoYXZlIGFueSBpZGVhPw0KDQpQLlMuIEluIGZhY3QsIGkgYW0gdHJ5aW5nIHRvIHJlc29s dmUgdGhlIHByb2JsZW0gb2YgIkNhbm5vdCBmaW5kIG1hc3RlciBkb21haW4iDQoNCg0KDQpsaWtl Lm1hQGNzMmMuY29tLmNuDQo= ------=_001_NextPart466547553878_=---- Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html><head><meta http-equiv=3D"content-type" content=3D"text/html; charse= t=3Dus-ascii"><style>body { line-height: 1.5; }body { font-size: 10.5pt; f= ont-family: ????; color: rgb(0, 0, 0); line-height: 1.5; }</style></head><= body>=0A<div><span></span>Hi, guys</div><div>I have a vdsm host, when i us= e "vgs" command, it will display 2 volume group which already exist. But w= hen i use "vdsClient -s 0 getVGList", it displays nothing. That means vdsm= cannot see the existed vg. Why? Does anybody have any idea?</div><div><br= ></div><div>P.S. In fact, i am trying to resolve the problem of "Cannot fi= nd master domain"</div>=0A<div><br></div><hr style=3D"width: 210px; height= : 1px;" color=3D"#b5c4df" size=3D"1" align=3D"left">=0A<div><span><div sty= le=3D"MARGIN: 10px; FONT-FAMILY: verdana; FONT-SIZE: 10pt"><div>like.ma@cs= 2c.com.cn</div></div></span></div>=0A</body></html> ------=_001_NextPart466547553878_=------

2 1

Get involved in oVirt project! May edition
by Sandro Bonazzola 07 May '15

07 May '15

Hi, have you got some free time and do you want to get involved in oVirt project? Do you like the idea of having fresh disk images of recent distribution in oVirt Gluster repository? You can help us by testing existing online images (like https://getfedora.org/en/cloud/download/) ensuring they works with cloud-init or creating one yourself and report your success to devel(a)ovirt.org. We'll be happy to upload the images once these are ready. Do you like Debian and do you have some programming skill? Help us getting VDSM running on it! Debian Jessie has been released a couple of weeks ago and it's a good time for giving it a try. You can follow the progress here: http://www.ovirt.org/VDSM_on_Debian Here are some bugs you can hopefully fix in less that one day or you can just try to reproduce providing info: Bug ID Status Whiteboard Summary 1065350 POST integration hosted-engine should prompt a question at the user when the host was already a host in the engine 1059952 NEW integration hosted-engine --deploy (additional host) will fail if the engine is not using the default self-signed CA 1083104 ASSIGNED integration engine-setup --offline does not update versionlock Do you want something easier? Bug ID Whiteboard Status Summary 1174285 i18n NEW [de-DE] "Live Snapshot Support" reads "Live Snapsnot Support" 772931 infra NEW [RFE] Reports should include the name of the oVirt engine 1143817 integration NEW [TEXT ONLY] - Hosted Engine - Instructions for FQDN are not clear enough 1156060 integration NEW [text] engine admin password prompt consistency 1115059 network NEW Incomplete error message when adding VNIC profile to running VM 734120 storage NEW [RFE] VDSM: use virt-sparsify/zerofree to reduce image size Do you love "DevOps?", you count stable builds in jenkins ci while trying to fall a sleep? Then oVirt infra team is looking for you!, join the infra team and dive in to do the newest and coolest devops tools today! Here are some of our open tasks you can help with: https://fedorahosted.org/ovirt/report/1 Don't miss next week oVirt infra hackathon[8]! You don't have programming skills, not enough time for DevOps but you want still to contribute? Here are some bugs you can take care of, also without writing a line of code: https://bugzilla.redhat.com/buglist.cgi?quicksearch=product%3Aovirt%20white… Do you prefer to test things? We have some test cases[5] you can try using nightly snapshots[6] Do you want to contribute test cases? Most of the features[7] included in oVirt are missing a test case, you're welcome to contribute one! Is this the first time you try to contribute to oVirt project? You can start from here [1][2]! You don't know gerrit very well? You can find some more docs here [3]. Any other question about development? Feel free to ask on devel(a)ovirt.org or on irc channel[4]. Let us know you're getting involved, present yourself and tell us what you're going to do, you'll be welcome! [1] http://www.ovirt.org/Develop [2] http://www.ovirt.org/Working_with_oVirt_Gerrit [3] https://gerrit-review.googlesource.com/Documentation [4] http://www.ovirt.org/Community [5] http://www.ovirt.org/Category:TestCase [6] http://www.ovirt.org/Install_nightly_snapshot [7] http://www.ovirt.org/Category:Feature [8] http://lists.ovirt.org/pipermail/devel/2015-May/010426.html -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 0

selectively disabling IPv6 on bridges
by Rik Theys 07 May '15

07 May '15

Hi, I'm looking for a way to selectively disable IPv6 on the bridge interfaces on the oVirt hosts. When oVirt creates the bridges for all logical networks on the host, it keeps the default settings for IPv6 which means all bridges get a link-local address and accept router advertisements. When a VM is created on the logical network, it can now reach the host over IPv6 (but not over IPv4 if no IP address has been assigned on the host). If it sends out a router advertisement it can even create a global IPv6 address (haven't tested this). How can I prevent this? I would like to prevent the guest from IPv6 access to the host but the guest itself still needs IPv6 access (global IPv6 addresses). Is it sufficient to create a sysctl config file that says: net.ipv6.conf.default.disable_ipv6 = 1 ? Regards, Rik -- Rik Theys System Engineer KU Leuven - Dept. Elektrotechniek (ESAT) Kasteelpark Arenberg 10 bus 2440 - B-3001 Leuven-Heverlee +32(0)16/32.11.07 ---------------------------------------------------------------- <<Any errors in spelling, tact or fact are transmission errors>>

3 7

High number of XFS extents migrating disk from iscsi to Gluster
by Adrián Santos Marrero 07 May '15

07 May '15

Hi!, I've been migrating my Ovirt storage from iscsi to Gluster. What I've been doing is moving the disks with the VM powered off. This procedure was fine until I tried to migrate a 100GB disk from a VM with an Oracle DB. During this migration the access to Gluster slowed down, affecting the whole cluster (VDSM timeout in oVirt Engine, VM's entered in unknown state, gluster client disconnected from a brick) What I found in gluster servers was a XFS error: XFS: possible memory allocation deadlock in kmem_alloc (mode:0x250) And this error is due to the number of extents of the file (~ 8M): gluster01:/gluster/ovirt1_brick_01/brick/89c4e113-1003-4b4e-850e-e7fc5bf2edc6/images/e5b7fc46-4168-4019-a13a-f9b7093d0534# > xfs_bmap f9cd555d-fd98-499f-a853-d0ce76eecd37 | wc -l > 8627613 > I'm using Gluster 3.6.2 and Centos 7 (3.10.0-229.1.2.el7.x86_64 kernel). Does anyone know why is qemu-img generating this so fragmented file? Regards. -- ---------------------------------------------------------------- Adrián Santos Marrero Técnico de Sistemas - Área de Infraestructuras TIC Servicios de Tecnologías de la Información y Comunicación (STIC) Universidad de La Laguna (ULL) Teléfono/Phone: +34 922 845089 ---------------------------------------------------------------- Este mensaje puede contener información confidencial y/o privilegiada. Si usted no es el destinatario o lo ha recibido por error debe borrarlo inmediatamente. Está estrictamente prohibido por la legislación vigente realizar cualquier copia, revelación o distribución del contenido de este mensaje sin autorización expresa. This e-mail may contain confidential and/or privileged information. If you are not the intended recipient or have received this e-mail in error you must destroy it. Any unauthorised copying, disclosure or distribution of the material in this e-mail is strictly forbidden by current legislation.

4 7

Upgrade Node through oVirt Manager
by Kevin 07 May '15

07 May '15

Hi all, Hi installed two nodes with the 3.5.1 ISO. Now I want to upgrade them to 3.5.2 new ISO. I uploaded the ISO file to my ISO domain with engine-iso-uploader command. But I can't choose my ISO file in the Manager to upgrade my nodes. How can I select the good Iso file ? Thanks --- Kevin

2 1

autologin into vm desktop
by Adolfo 07 May '15

07 May '15

Hello, My name is Adolfo. I'm in charge of the development of UDS, an open source connection broker (with commercial support if requested) (http://www.ovirt.org/Universidad_de_Sevilla_Case_Study is done with it for example). I don't know if this is the place to post this "request for help", if not, please forgive me :) The case is that we are including Spice as an accepted protocol for connecting to VMs (currently we allow rdp, rgs, nx, ...) provided by oVirt, and we have found the following "issue". It's ease to get the connection parameters for the VM using REST api, even get the ticket for allowing connection, but i have been looking for a way "logging user" directly into desktop, not only connect to "display" but also "log in" into remote without needed to use a second authentication. I have seen that oVirt Portal currently allows this, and i have found also that vsdClient can do login using "vdsClient -s <HOSTIP> desktopLogin <VMID> <DOMAIN> <USER> <PASSWORD>", and although it is possible to use this, it will be a bit "tricky" to get it working i think. My question is... ¿Is any way of doing "desktop login" using REST API, or any other "simple method" from an external app such as this broker?. ¿If yes, how? :-) ¿If not, will be support for this an anyone knows how? Thank you, and again, if this is not the correct list, sorry for the annoyance. Adolfo Gómez

3 9

Re: [ovirt-users] GetGlusterVolumeAdvancedDetailsQuery & GetGlusterVolumeProfileInfoQuery when using seperate storage network
by Jorick Astrego 07 May '15

07 May '15

This is a multi-part message in MIME format. --------------080602020902020502010500 Content-Type: text/plain; charset="windows-1252" Content-Transfer-Encoding: quoted-printable On 05/06/2015 06=3A24 PM=2C knarra wrote=3A =3E On 05/06/2015 06=3A59 PM=2C Jorick Astrego wrote=3A =3E=3E =3E=3E =3E=3E On 05/06/2015 02=3A49 PM=2C knarra wrote=3A =3E=3E=3E On 05/06/2015 05=3A33 PM=2C Jorick Astrego wrote=3A =3E=3E=3E=3E Hi=2C =3E=3E=3E=3E =3E=3E=3E=3E Looking forward to bz 1049994 Allow choosing network interf= ace =3E=3E=3E=3E for gluster domain traffic=2E =3E=3E=3E=3E =3E=3E=3E=3E Currently I have the bricks on a different storage network and= =3E=3E=3E=3E can=27t get the volume details or profile it=2E =3E=3E=3E=3E =3E=3E=3E=3E Will this be handled in 3=2E6 properly=3F I don=27t see any ch= anges in =3E=3E=3E=3E gerrit regarding this=2C but I can be ovelooking it=2E =3E=3E=3E=3E =3E=3E=3E=3E The errors I get currently=3A =3E=3E=3E=3E =3E=3E=3E=3E Could not fetch brick profile stats =3E=3E=3E=3E =3E=3E=3E=3E 2015-05-06 10=3A34=3A22=2C430 ERROR =3E=3E=3E=3E =5Borg=2Eovirt=2Eengine=2Ecore=2Ebll=2Egluster=2EGetGluste= rVolumeProfileInfoQuery=5D =3E=3E=3E=3E =28ajp--127=2E0=2E0=2E1-8702-27=29 Query GetGlusterVolumeP= rofileInfoQuery =3E=3E=3E=3E failed=2E Exception message is null =3A =3E=3E=3E=3E java=2Elang=2ENullPointerException=3A java=2Elang=2ENullPo= interException =3E=3E=3E=3E =3E=3E=3E=3E and =3E=3E=3E=3E =3E=3E=3E=3E Error in fetching the brick details=2C please try again=2E= =3E=3E=3E=3E =3E=3E=3E=3E 2015-05-06 10=3A36=3A14=2C205 ERROR =3E=3E=3E=3E =5Borg=2Eovirt=2Eengine=2Ecore=2Ebll=2Egluster=2EGetGluste= rVolumeAdvancedDetailsQuery=5D =3E=3E=3E=3E =28ajp--127=2E0=2E0=2E1-8702-55=29 Query =3E=3E=3E=3E GetGlusterVolumeAdvancedDetailsQuery failed=2E Exception m= essage =3E=3E=3E=3E is VdcBLLException=3A Volume status failed =3E=3E=3E=3E error=3A Staging failed on *=2E*=2E*=2E*=2E Error=3A No br= ick =3E=3E=3E=3E glustertest1=2Enetbulae=2Etest/gluster/brick1 in volume da= ta =3E=3E=3E=3E Staging failed on *=2E*=2E*=2E*=2E Error=3A No brick=20 =3E=3E=3E=3E glustertest1=2Enetbulae=2Etest=3A/gluster/brick1 in volume= data =3E=3E=3E=3E return code=3A -1 =28Failed with error GlusterVolumeStatus= Failed =3E=3E=3E=3E and code 4157=29 =3A =3E=3E=3E=3E org=2Eovirt=2Eengine=2Ecore=2Ecommon=2Eerrors=2EVdcBLLExce= ption=3A =3E=3E=3E=3E VdcBLLException=3A Volume status failed =3E=3E=3E=3E error=3A Staging failed on *=2E*=2E*=2E*=2E Error=3A No br= ick=20 =3E=3E=3E=3E glustertest1=2Enetbulae=2Etest=3A/gluster/brick1 in volume= data =3E=3E=3E=3E Staging failed on *=2E*=2E*=2E*=2E Error=3A No brick=20 =3E=3E=3E=3E glustertest1=2Enetbulae=2Etest=3A/gluster/brick1 in volume= data =3E=3E=3E=3E return code=3A -1 =28Failed with error GlusterVolumeStatus= Failed =3E=3E=3E=3E and code 4157=29=3A =3E=3E=3E=3E org=2Eovirt=2Eengine=2Ecore=2Ecommon=2Eerrors=2EVdcBLLExce= ption=3A =3E=3E=3E=3E VdcBLLException=3A Volume status failed =3E=3E=3E=3E error=3A Staging failed on *=2E*=2E*=2E*=2E Error=3A No br= ick=20 =3E=3E=3E=3E glustertest1=2Enetbulae=2Etest=3A/gluster/brick1 in volume= data =3E=3E=3E=3E Staging failed on *=2E*=2E*=2E*=2E Error=3A No brick=20 =3E=3E=3E=3E glustertest1=2Enetbulae=2Etest=3A/gluster/brick1 in volume= data =3E=3E=3E=3E return code=3A -1 =28Failed with error GlusterVolumeStatus= Failed =3E=3E=3E=3E and code 4157=29 =3E=3E=3E=3E =3E=3E=3E=3E =3E=3E=3E=3E =3E=3E=3E=3E =3E=3E=3E=3E =3E=3E=3E=3E Met vriendelijke groet=2C With kind regards=2C =3E=3E=3E=3E =3E=3E=3E=3E Jorick Astrego* =3E=3E=3E=3E =3E=3E=3E=3E Netbulae Virtualization Experts * =3E=3E=3E=3E --------------------------------------------------------------= ---------- =3E=3E=3E=3E Tel=3A 053 20 30 270 =09info=40netbulae=2Eeu =09Staalsteden 4-= 3A =09KvK 08198180 =3E=3E=3E=3E Fax=3A 053 20 30 271 =09www=2Enetbulae=2Eeu =097547 TA Ensched= e =09BTW =3E=3E=3E=3E NL821234584B01 =3E=3E=3E=3E =3E=3E=3E=3E =3E=3E=3E=3E --------------------------------------------------------------= ---------- =3E=3E=3E=3E =3E=3E=3E=3E =3E=3E=3E=3E =3E=3E=3E=3E =5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F= =5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F= =5F=5F =3E=3E=3E=3E Users mailing list =3E=3E=3E=3E Users=40ovirt=2Eorg =3E=3E=3E=3E http=3A//lists=2Eovirt=2Eorg/mailman/listinfo/users =3E=3E=3E Hi=2C =3E=3E=3E =3E=3E=3E Can you please check what does your gluster peer status on ea= ch =3E=3E=3E of your nodes return=3F I guess they are in disconnected state a= nd =3E=3E=3E that is the reason you are not able to view these details=2E =3E=3E=3E =3E=3E=3E Thanks =3E=3E=3E kasturi =3E=3E=3E =3E=3E On the nodes it gives me the following=3A =3E=3E =3E=3E gluster peer status =3E=3E Connection failed=2E Please check if gluster daemon is operation= al=2E =3E=3E =3E This means that glusterd is not running on this node=2E you could check= =3E the status of glusterd by running the command =27service glusterd statu= s=27=2E =3E =3E please start glusterd by running the command =27service glusterd start= =27 =3E on both of your nodes=2E =3E =3E Ideally when glusterd goes down node in ovirt should move to =3E non-operational=2E Because of this BZ 1207150 as of now it is not =3E changing the state to non operational=2E There is no glusterd on the compute nodes in our setup=2C we have two clusters=2E One for virt hosts only and one for GlusterFS only=2E Like I said=2C everything is Up and running fine=2E It=27s just that I can= =27t get the stats because the hostname !=3D GlusterFS NIC ip =3E=3E =3E=3E =3E=3E But everyting is up and ovirt found the manually configured volume= =3E=3E perfectly=2E But the hostname it lists as glustertest1=2Enetbulae=2E= test is =3E=3E not what my volume uses for communication as I created the volume =3E=3E using the ip=27s of the storage network=2E =3E=3E =3E=3E =20 =3E=3E gluster peer status =3E=3E Number of Peers=3A 2 =3E=3E =3E=3E Hostname=3A 10=2E1=2E1=2E3 =3E=3E Uuid=3A 1cc0875e-1699-42ae-aed2-9152667ed5af =3E=3E State=3A Peer in Cluster =28Connected=29 =3E=3E =3E=3E Hostname=3A 10=2E1=2E1=2E2 =3E=3E Uuid=3A a0b3ac13-7388-441a-a238-1deb023cab6c =3E=3E State=3A Peer in Cluster =28Connected=29 =3E=3E =3E Did you import already existing cluster =3F No=2C I provisioned the nodes=2E Added them to our glusterfs cluster =28wit= h virt service disabled=29 and created the volume manually=2E oVirt auto-discovered the manual created volume after that=2E Error=3A No brick *glustertest1=2Enetbulae=2Etest*=3A/gluster/brick1 i= n volume data=20 Hostname=3A *10=2E1=2E1=2E3* Things should work better in 3=2E6 =28bz1049994=29=2C but I don=27t see any= code changes to =22GetGlusterVolumeProfileInfoQuery=22 linked to this in Bugzill= a=2E Met vriendelijke groet=2C With kind regards=2C Jorick Astrego Netbulae Virtualization Experts=20 ---------------- =09Tel=3A 053 20 30 270 =09info=40netbulae=2Eeu =09Staalsteden 4-3A =09KvK= 08198180 =09Fax=3A 053 20 30 271 =09www=2Enetbulae=2Eeu =097547 TA Enschede =09BTW= NL821234584B01 ---------------- --------------080602020902020502010500 Content-Type: text/html; charset="windows-1252" Content-Transfer-Encoding: quoted-printable =3Chtml=3E =3Chead=3E =3Cmeta content=3D=22text/html=3B charset=3Dwindows-1252=22 http-equiv=3D=22Content-Type=22=3E =3C/head=3E =3Cbody bgcolor=3D=22=23FFFFFF=22 text=3D=22=23000000=22=3E =3Cbr=3E =3Cbr=3E =3Cdiv class=3D=22moz-cite-prefix=22=3EOn 05/06/2015 06=3A24 PM=2C knar= ra wrote=3A=3Cbr=3E =3C/div=3E =3Cblockquote cite=3D=22mid=3A554A403A=2E9070308=40redhat=2Ecom=22 type= =3D=22cite=22=3E =3Cmeta content=3D=22text/html=3B charset=3Dwindows-1252=22 http-equiv=3D=22Content-Type=22=3E =3Cdiv class=3D=22moz-cite-prefix=22=3EOn 05/06/2015 06=3A59 PM=2C Jo= rick Astrego wrote=3A=3Cbr=3E =3C/div=3E =3Cblockquote cite=3D=22mid=3A554A1721=2E3080605=40netbulae=2Eeu=22 t= ype=3D=22cite=22=3E =3Cmeta content=3D=22text/html=3B charset=3Dwindows-1252=22 http-equiv=3D=22Content-Type=22=3E =3Cbr=3E =3Cbr=3E =3Cdiv class=3D=22moz-cite-prefix=22=3EOn 05/06/2015 02=3A49 PM=2C= knarra wrote=3A=3Cbr=3E =3C/div=3E =3Cblockquote cite=3D=22mid=3A554A0DEB=2E2080002=40redhat=2Ecom=22= type=3D=22cite=22=3E =3Cmeta content=3D=22text/html=3B charset=3Dwindows-1252=22 http-equiv=3D=22Content-Type=22=3E =3Cdiv class=3D=22moz-cite-prefix=22=3EOn 05/06/2015 05=3A33 PM= =2C Jorick Astrego wrote=3A=3Cbr=3E =3C/div=3E =3Cblockquote cite=3D=22mid=3A554A031A=2E1060200=40netbulae=2Eeu= =22 type=3D=22cite=22=3E =3Cmeta content=3D=22text/html=3B charset=3Dwindows-1252=22 http-equiv=3D=22Content-Type=22=3E Hi=2C=3Cbr=3E =3Cbr=3E Looking forward to =3Cmeta http-equiv=3D=22content-type=22 content=3D=22text/html= =3B charset=3Dwindows-1252=22=3E =3Cmeta name=3D=22generator=22 content=3D=22Sheets=22=3E =3Cstyle type=3D=22text/css=22=3E=3C!--td =7Bborder=3A 1px soli= d =23ccc=3B=7Dbr =7Bmso-data-placement=3Asame-cell=3B=7D--=3E=3C/style=3Ebz= 1049994=A0=A0=A0 Allow choosing network interface for gluster= domain traffic=2E=3Cbr=3E =3Cbr=3E Currently I have the bricks on a different storage network and can=27t get the volume details or profile it=2E =3Cbr=3E =3Cbr=3E Will this be handled in 3=2E6 properly=3F I don=27t see any changes in gerrit regarding this=2C but I can be ovelooking it=2E=3Cbr=3E =3Cbr=3E The errors I get currently=3A=3Cbr=3E =3Cbr=3E =3Cblockquote=3ECould not fetch brick profile stats=3Cbr=3E =3C/blockquote=3E =3Cblockquote=3E2015-05-06 10=3A34=3A22=2C430 ERROR =5Borg=2Eovirt=2Eengine=2Ecore=2Ebll=2Egluster=2EGetGlusterVo= lumeProfileInfoQuery=5D =28ajp--127=2E0=2E0=2E1-8702-27=29 Query GetGlusterVolumeProfileInfoQuery failed=2E Exception message= is null =3A java=2Elang=2ENullPointerException=3A java=2Elang=2ENullPointerException=3Cbr=3E =3Cbr=3E =3C/blockquote=3E and=3Cbr=3E =3Cblockquote=3EError in fetching the brick details=2C please t= ry again=2E=3Cbr=3E =3Cbr=3E 2015-05-06 10=3A36=3A14=2C205 ERROR =5Borg=2Eovirt=2Eengine=2Ecore=2Ebll=2Egluster=2EGetGlusterVo= lumeAdvancedDetailsQuery=5D =28ajp--127=2E0=2E0=2E1-8702-55=29 Query GetGlusterVolumeAdvancedDetailsQuery failed=2E Exception message is VdcBLLException=3A Volume status failed=3Cbr=3E error=3A Staging failed on *=2E*=2E*=2E*=2E Error=3A No brick= glustertest1=2Enetbulae=2Etest/gluster/brick1 in volume data= =3Cbr=3E Staging failed on *=2E*=2E*=2E*=2E Error=3A No brick=A0 glustertest1=2Enetbulae=2Etest=3A/gluster/brick1 in volume da= ta=3Cbr=3E return code=3A -1 =28Failed with error GlusterVolumeStatusFailed and code 4157=29 =3A org=2Eovirt=2Eengine=2Ecore=2Ecommon=2Eerrors=2EVdcBLLExcepti= on=3A VdcBLLException=3A Volume status failed=3Cbr=3E error=3A Staging failed on *=2E*=2E*=2E*=2E Error=3A No brick= =A0 glustertest1=2Enetbulae=2Etest=3A/gluster/brick1 in volume da= ta=3Cbr=3E Staging failed on *=2E*=2E*=2E*=2E Error=3A No brick=A0 glustertest1=2Enetbulae=2Etest=3A/gluster/brick1 in volume da= ta=3Cbr=3E return code=3A -1 =28Failed with error GlusterVolumeStatusFailed and code 4157=29=3A org=2Eovirt=2Eengine=2Ecore=2Ecommon=2Eerrors=2EVdcBLLExcepti= on=3A VdcBLLException=3A Volume status failed=3Cbr=3E error=3A Staging failed on *=2E*=2E*=2E*=2E Error=3A No brick= =A0 glustertest1=2Enetbulae=2Etest=3A/gluster/brick1 in volume da= ta=3Cbr=3E Staging failed on *=2E*=2E*=2E*=2E Error=3A No brick=A0 glustertest1=2Enetbulae=2Etest=3A/gluster/brick1 in volume da= ta=3Cbr=3E return code=3A -1 =28Failed with error GlusterVolumeStatusFailed and code 4157=29=3Cbr=3E =3C/blockquote=3E =3Cblockquote=3E=3Cbr=3E =3C/blockquote=3E =3Cbr=3E =3Cbr=3E =3Cbr=3E =3Cspan style=3D=22color=3A=23604c78=3B=22=3E=3Cfont color=3D= =22000000=22=3E=3Cspan style=3D=22mso-fareast-language=3Aen-gb=3B=22 lang=3D=22N= L=22=3EMet vriendelijke groet=2C With kind regards=2C=3Cbr=3E =3Cbr=3E =3C/span=3EJorick Astrego=3C/font=3E=3C/span=3E=3Cb style=3D=22color=3A=23604c78=22=3E=3Cbr=3E =3Cbr=3E Netbulae Virtualization Experts =3C/b=3E=3Cbr=3E =3Chr style=3D=22border=3Anone=3Bborder-top=3A1px solid =23ccc= =3B=22=3E =3Ctable style=3D=22width=3A 522px=22=3E =3Ctbody=3E =3Ctr=3E =3Ctd style=3D=22width=3A 130px=3Bfont-size=3A 10px=22=3E= Tel=3A 053 20 30 270=3C/td=3E =3Ctd style=3D=22width=3A 130px=3Bfont-size=3A 10px=22=3E= =3Ca moz-do-not-send=3D=22true=22 class=3D=22moz-txt-link-abbreviated=22 href=3D=22mailto=3Ainfo=40netbulae=2Eeu=22=3Einfo=40n= etbulae=2Eeu=3C/a=3E=3C/td=3E =3Ctd style=3D=22width=3A 130px=3Bfont-size=3A 10px=22=3E= Staalsteden 4-3A=3C/td=3E =3Ctd style=3D=22width=3A 130px=3Bfont-size=3A 10px=22=3E= KvK 08198180=3C/td=3E =3C/tr=3E =3Ctr=3E =3Ctd style=3D=22width=3A 130px=3Bfont-size=3A 10px=22=3E= Fax=3A 053 20 30 271=3C/td=3E =3Ctd style=3D=22width=3A 130px=3Bfont-size=3A 10px=22=3E= =3Ca moz-do-not-send=3D=22true=22 class=3D=22moz-txt-link-abbreviated=22 href=3D=22http=3A//www=2Enetbulae=2Eeu=22=3Ewww=2Enet= bulae=2Eeu=3C/a=3E=3C/td=3E =3Ctd style=3D=22width=3A 130px=3Bfont-size=3A 10px=22=3E= 7547 TA Enschede=3C/td=3E =3Ctd style=3D=22width=3A 130px=3Bfont-size=3A 10px=22=3E= BTW NL821234584B01=3C/td=3E =3C/tr=3E =3C/tbody=3E =3C/table=3E =3Cbr=3E =3Chr style=3D=22border=3Anone=3Bborder-top=3A1px solid =23ccc= =3B=22=3E=3Cbr=3E =3Cbr=3E =3Cfieldset class=3D=22mimeAttachmentHeader=22=3E=3C/fieldset= =3E =3Cbr=3E =3Cpre wrap=3D=22=22=3E=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F= =5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F= =5F=5F=5F=5F=5F=5F=5F=5F=5F Users mailing list =3Ca moz-do-not-send=3D=22true=22 class=3D=22moz-txt-link-abbreviated=22 hr= ef=3D=22mailto=3AUsers=40ovirt=2Eorg=22=3EUsers=40ovirt=2Eorg=3C/a=3E =3Ca moz-do-not-send=3D=22true=22 class=3D=22moz-txt-link-freetext=22 href= =3D=22http=3A//lists=2Eovirt=2Eorg/mailman/listinfo/users=22=3Ehttp=3A//lis= ts=2Eovirt=2Eorg/mailman/listinfo/users=3C/a=3E=3C/pre=3E =3C/blockquote=3E Hi=2C=3Cbr=3E =3Cbr=3E =A0=A0=A0 Can you please check what does your gluster peer status= on each of your nodes return=3F=A0 I guess they are in disconnected= state and that is the reason you are not able to view these details=2E=3Cbr=3E =3Cbr=3E Thanks=3Cbr=3E kasturi=3Cbr=3E =3Cblockquote cite=3D=22mid=3A554A031A=2E1060200=40netbulae=2Eeu= =22 type=3D=22cite=22=3E =3C/blockquote=3E =3Cbr=3E =3C/blockquote=3E On the nodes it gives me the following=3A=3Cbr=3E =3Cbr=3E =3Cblockquote=3Egluster peer status=3Cbr=3E Connection failed=2E Please check if gluster daemon is operational=2E=3Cbr=3E =3C/blockquote=3E =3C/blockquote=3E This means that glusterd is not running on this node=2E you could check the status of glusterd by running the command =27service glusterd status=27=2E =3Cbr=3E =3Cbr=3E please start glusterd by running the command =27service glusterd start=27 on both of your nodes=2E=3Cbr=3E =3Cbr=3E Ideally when glusterd goes down node in ovirt should move to non-operational=2E Because of this BZ 1207150 as of now it is not changing the state to non operational=2E=3Cbr=3E =3C/blockquote=3E =3Cbr=3E There is no glusterd on the compute nodes in our setup=2C we have two= clusters=2E One for virt hosts only and one for GlusterFS only=2E=3Cbr= =3E =3Cbr=3E =3Cbr=3E Like I said=2C everything is Up and running fine=2E It=27s just that I= can=27t get the stats because the hostname !=3D GlusterFS NIC ip=3Cbr= =3E =3Cbr=3E =3Cbr=3E =3Cblockquote cite=3D=22mid=3A554A403A=2E9070308=40redhat=2Ecom=22 type= =3D=22cite=22=3E =3Cblockquote cite=3D=22mid=3A554A1721=2E3080605=40netbulae=2Eeu=22 t= ype=3D=22cite=22=3E =3Cblockquote=3E =3Cbr=3E =3Cbr=3E =3C/blockquote=3E But everyting is up and ovirt found the manually configured volume perfectly=2E But the hostname it lists as glustertest1=2Enetbulae=2Etest is not what my volume uses for communication as I created the volume using the ip=27s of the storage network=2E=3Cbr=3E =3Cbr=3E =3Cblockquote=3E=A0=3Cbr=3E gluster peer status=3Cbr=3E Number of Peers=3A 2=3Cbr=3E =3Cbr=3E Hostname=3A 10=2E1=2E1=2E3=3Cbr=3E Uuid=3A 1cc0875e-1699-42ae-aed2-9152667ed5af=3Cbr=3E State=3A Peer in Cluster =28Connected=29=3Cbr=3E =3Cbr=3E Hostname=3A 10=2E1=2E1=2E2=3Cbr=3E Uuid=3A a0b3ac13-7388-441a-a238-1deb023cab6c=3Cbr=3E State=3A Peer in Cluster =28Connected=29=3Cbr=3E =3Cbr=3E =3C/blockquote=3E =3C/blockquote=3E Did you import already existing cluster =3F=3Cbr=3E =3C/blockquote=3E =3Cbr=3E No=2C I provisioned the nodes=2E Added them to our glusterfs cluster =28with virt service disabled=29 and created the volume manually=2E=3Cb= r=3E =3Cbr=3E oVirt auto-discovered the manual created volume after that=2E=3Cbr=3E= =3Cbr=3E =3Cblockquote=3EError=3A No brick=A0 =3Cb=3Eglustertest1=2Enetbulae=2Et= est=3C/b=3E=3A/gluster/brick1 in volume data=A0 =3Cbr=3E =3Cbr=3E Hostname=3A =3Cb=3E10=2E1=2E1=2E3=3C/b=3E=3Cbr=3E =3Cbr=3E =3C/blockquote=3E Things should work better in 3=2E6 =28bz1049994=29=2C but I don=27t see= any code changes to =22GetGlusterVolumeProfileInfoQuery=22 linked to this i= n Bugzilla=2E=3Cbr=3E =3Cbr=3E =3Cbr=3E =3Cbr=3E =3Cbr=3E =20= =3CBR /=3E =3CBR /=3E =3Cb style=3D=22color=3A=23604c78=22=3E=3C/b=3E=3Cbr=3E=3Cspan style=3D=22c= olor=3A=23604c78=3B=22=3E=3Cfont color=3D=22000000=22=3E=3Cspan style=3D=22= mso-fareast-language=3Aen-gb=3B=22 lang=3D=22NL=22=3EMet vriendelijke groet= =2C With kind regards=2C=3Cbr=3E=3Cbr=3E=3C/span=3EJorick Astrego=3C/font= =3E=3C/span=3E=3Cb style=3D=22color=3A=23604c78=22=3E=3Cbr=3E=3Cbr=3ENetbul= ae Virtualization Experts =3C/b=3E=3Cbr=3E=3Chr style=3D=22border=3Anone=3B= border-top=3A1px solid =23ccc=3B=22=3E=3Ctable style=3D=22width=3A 522px=22= =3E=3Ctbody=3E=3Ctr=3E=3Ctd style=3D=22width=3A 130px=3Bfont-size=3A 10px= =22=3ETel=3A 053 20 30 270=3C/td=3E =3Ctd style=3D=22width=3A 130px=3Bf= ont-size=3A 10px=22=3Einfo=40netbulae=2Eeu=3C/td=3E =3Ctd style=3D=22wid= th=3A 130px=3Bfont-size=3A 10px=22=3EStaalsteden 4-3A=3C/td=3E =3Ctd sty= le=3D=22width=3A 130px=3Bfont-size=3A 10px=22=3EKvK 08198180=3C/td=3E=3C/tr= =3E=3Ctr=3E =3Ctd style=3D=22width=3A 130px=3Bfont-size=3A 10px=22=3EFax= =3A 053 20 30 271=3C/td=3E =3Ctd style=3D=22width=3A 130px=3Bfont-size= =3A 10px=22=3Ewww=2Enetbulae=2Eeu=3C/td=3E =3Ctd style=3D=22width=3A 130= px=3Bfont-size=3A 10px=22=3E7547 TA Enschede=3C/td=3E =3Ctd style=3D=22w= idth=3A 130px=3Bfont-size=3A 10px=22=3EBTW NL821234584B01=3C/td=3E=3C/tr=3E= =3C/tbody=3E=3C/table=3E=3Cbr=3E=3Chr style=3D=22border=3Anone=3Bborder-top= =3A1px solid =23ccc=3B=22=3E=3CBR /=3E =3C/body=3E =3C/html=3E --------------080602020902020502010500--

3 3