- Users - oVirt List Archives

[ovirt 3.4.4] iptables blocking access via nativ vnc (blocking port)
by Grzegorz Szypa 09 Oct '14

09 Oct '14

Hi. How does opening ports for VNC connection if you need ports in the range 5900-5999 unblock yourself or ovirt should do it yourself? -- G.Sz.

2 3

To oVirt or not to oVirt
by Phil Daws 08 Oct '14

08 Oct '14

Good day all! have been a KVM user/admin for the last few years and have configured all aspects using either VirtManager or CLI where required. am about to reinstall my development system and started to look at using CentOS7 as the host, and to get a more recent version of KVM. After a little search around I came across oVirt and am considering whether to install this now and use it as the main configuration tool. do have a couple of questions which hopefully somebody will be able to help with? at present I am using OpenVSwitch with KVM so that I could use the vlan capabilities and wish to ask whether will need to move away from that to a different solution ? On my host I already have about 10 VMs that I wish to keep and whether I could migrate them into oVirt ? I have been using LVM volumes as raw storage for the VM images so presume would need to convert them to a different format for use ? one of my VMs actually acts as a storage provider, using Quantastor, which then presents storage to other VMs using iSCSI which hope I can still use in oVirt ? Apologies if these questions are a little vague but am trying to get my head around how it would all work. Thank you, Phil

4 11

oVirt 3.2 - iSCSI offload (broadcom - bnx2i)
by Ricardo Esteves 08 Oct '14

08 Oct '14

Hi, I've put my host on maintenance, then i configured iscsi offload for my broadcom cards changing target's file's (192.168.12.2,3260 and 192.168.12.4,3260) in my node iqn.1986-03.com.hp:storage.msa2324i.1226151a6 to use interface bnx2i.d8:d3:85:67:e3:bb, but after activating the host, configurations are back to default. [root@blade6 iscsi]# ll ifaces/ total 16 -rw-------. 1 root root 248 Mai 13 2013 bnx2i.d8:d3:85:67:e3:b9 -rw-------. 1 root root 282 Abr 10 22:10 bnx2i.d8:d3:85:67:e3:bb -rw-------. 1 root root 247 Ago 15 2012 bnx2i.d8:d3:85:bf:e9:b1 -rw-------. 1 root root 247 Ago 15 2012 bnx2i.d8:d3:85:bf:e9:b5 [root@blade6 iscsi]# ll nodes/iqn.1986-03.com.hp\:storage.msa2324i.1226151a60/ total 16 -rw-------. 1 root root 1782 Abr 10 22:34 192.168.11.1,3260 -rw-------. 1 root root 1782 Abr 10 22:34 192.168.11.3,3260 -rw-------. 1 root root 1782 Abr 10 22:34 192.168.12.2,3260 -rw-------. 1 root root 1782 Abr 10 22:34 192.168.12.4,3260 Anyone know how to configure iscsi offload for ovirt?

5 13

About the oVirt workshop on Oct 16 at LinuxCon
by Patrick Laimbock 08 Oct '14

08 Oct '14

Hi, About the oVirt workshop at LinuxCon on Oct 16: is it a hands-on workshop where you do an install/config on your own laptop (if yes, requirements?) or is it more of a presentation kind of workshop? Thanks, Patrick

1 0

oVirt Weekly Sync: October 8, 2014
by Brian Proffitt 08 Oct '14

08 Oct '14

========================= #ovirt: oVirt Weekly Sync ========================= Meeting started by bkp at 14:02:31 UTC. The full logs are available at http://ovirt.org/meetings/ovirt/2014/ovirt.2014-10-08-14.02.log.html . Meeting summary --------------- * Agenda and roll Call (bkp, 14:03:21) * infra update (bkp, 14:03:39) * 3.4.z updates (bkp, 14:03:49) * 3.5 status (bkp, 14:03:57) * Conferences and workshops (bkp, 14:04:13) * Other Topics (bkp, 14:04:24) * infra update (bkp, 14:06:40) * LINK: http://resources.ovirt.org/meetings/ovirt/2014/ovirt.2014-09-29-14.16.html (sbonazzo, 14:09:56) * infra update Latest minutes at http://resources.ovirt.org/meetings/ovirt/2014/ovirt.2014-09-15-14.25.html (bkp, 14:10:03) * infra update The OpenShift team offered, and then performed, a migration of the oVirt.org site to a larger gear, which should allivate the out-of-resource problems that have been killing the site lately. (bkp, 14:10:06) * infra update bkp is working with OSAS designers and misc to get the next update of oVirt.org on the schedule. (bkp, 14:10:10) * infra update Addemdum: Latest minutes at http://resources.ovirt.org/meetings/ovirt/2014/ovirt.2014-09-29-14.16.html (bkp, 14:11:21) * 3.5 status (bkp, 14:12:04) * 3.5 status 3.5.0 ga started composing on morning of Oct. 6 and encountered several issues (bkp, 14:18:05) * 3.5 status some packages arrived late for repo composition (bkp, 14:18:09) * 3.5 status linode / release server ran out of space (bkp, 14:18:11) * 3.5 status oVirt site went down (see infra status above) (bkp, 14:18:14) * 3.5 status Once we were ready to release, a couple of blockers showed up (bkp, 14:18:16) * 3.5 status Current status: One blocker in POST (bkp, 14:18:24) * 3.5 status Release dates uncertain due to holidays and KVM Forum (bkp, 14:18:29) * 3.5 status Patch is ready to be merged but maintainers are on holiday so merge will be probably delayed to sunday, Oct. 12. Once it is fixed, we should go with an RC5 release, hopefully last on (bkp, 14:19:23) * 3.5 status PR and social media materials for oVirt 3.5's eventual release are set to go. (bkp, 14:19:50) * conferences and workshops (bkp, 14:20:36) * oVirt Workshop is all set. As of Monday night, we had 33 attendees signed up, with more expected from a big mail push from the Linux Foundation on Tuesday. (bkp, 14:21:29) * Hopefully there will be pie for YamakasY (bkp, 14:21:47) * bkp should have an outline and guide together for LISA 14's demo lab later this week. (bkp, 14:22:02) * In early 2015, oVirt will be represented at FOSDEM, as well as Linux.conf.au in Auckland, NZ. (bkp, 14:22:05) * Still waiting to hear about FOSDEM stand for oVirt. (bkp, 14:22:08) * other topics (bkp, 14:23:11) * A reminder, bkp posted a new Users Guide for oVirt late last week (http://www.ovirt.org/OVirt_User_Guide) (bkp, 14:24:07) * bkp would like to focus on documentation while I am in TLV from Oct. 26-30, (following my meeting with ECS on Oct. 23), as well as discuss the QA/bug reporting workflow issues brought up by alonbl last week. (bkp, 14:24:10) * Please note: due to the holidays and KVM Forum next week, there will be no oVirt Weekly Sync meeting on Oct. 15. (bkp, 14:24:14) Meeting ended at 14:26:29 UTC. Action Items ------------ Action Items, by person ----------------------- * **UNASSIGNED** * (none) People Present (lines said) --------------------------- * bkp (62) * sbonazzo (25) * YamakasY (7) * ovirtbot (2) -- Brian Proffitt Community Liaison oVirt Open Source and Standards, Red Hat - http://community.redhat.com Phone: +1 574 383 9BKP IRC: bkp @ OFTC

1 0

Custom Cloud-Init script only partially executing
by Chris Routh 08 Oct '14

08 Oct '14

I'm trying to get the custom cloud-init script section in my site to run. My goal is to have the VM run 'yum update', add the PuppetLabs repository, and then install the latest puppet agent, and join it to Puppet. Following the docs for oVirt and Cloud-Init I have this: BEGIN SCRIPT ======================= yum_repos: # The name of the repository puppetlabs-release: baseurl: http://yum.puppetlabs.com/puppetlabs-release-el-6.noarch.rpm enabled: true failovermethod: priority gpgcheck: true gpgkey: file:///etc/pki/rpm-gpg/RPM-GPG-KEY-puppetlabs name: Puppet Labs repository for Enterprise Linux 6 # Upgrade the instance on first boot package_upgrade: true # Install additional packages on first boot packages: - puppet # Automatically setup and run puppetd puppet: conf: agent: server: "puppet.example.com" certname: "%f" ca_cert: | -----BEGIN CERTIFICATE----- < My Cert > -----END CERTIFICATE----- ======================= END SCRIPT However what I end up with from this is: - No Yum update - No added repository - Puppet gets installed from the default repos - No attempt to join According to the cloud-init docs my code is correct, however oVirt is not respecting anything, with the sole exception being the 'packages:' argument. Can someone please explain? Also, I have combed the script and ensured that the indentation was 4 spaces, and not tabs. I noted that previous users in this mailing list have had that issue before.

1 0

Nesting Hyper-V
by Nathan Llaneza 08 Oct '14

08 Oct '14

Hello All, I work for a educational institution, and we currently use oVirt in our datacenter. We are on the latest stable build of oVirt 3.4.4. Most of our hypervisors run CentOS 6.5; however, we have recently been asked if we could assign virtual hypervisors (Server 2012 R2) to some of our classes for learning purposes. I have been doing some research and found that I needed atleast kernel 3.10; therefore, I took one hypervisors and converted it to CentOS 7 fully patched. I also installed the nestedvt hook as described here <http://community.redhat.com/blog/2013/08/testing-ovirt-3-3-with-nested-kvm/>. I am all researched/googled out, and I am having no luck. After I do a typical install of Server 2012 R2 it will not let me install the Hyper-V role. I quote "Hyper-V cannot be installed: A hypervisor is already running". When I run the command cat /sys/module/kvm_intel/parameters/nested it comes back with a "Y". If I look in the host hooks it shows the nestedvt and macspoof. The VM has a custom property of macspoof = true. Did I miss something? Is this possible? Has anyone done this before? Thank you in advance for all you do. Your work on this project has helped our community college greatly and our student even more. Because of this project we have be able to give students virtual resources to complete their labs from anywhere at anytime.

3 2

Repos
by Koen Vanoppen 08 Oct '14

08 Oct '14

Hi All, This is not a issue or problem, more like a question... Is it possible for the next upcomming ovirt release to put all the necesarry file back in 1 repo in stead of 3 or 4 different ones? Because when you have your own local mirrors... This is not so nice to manage... Just asking... :-) Kind regards, Koen

3 3

Restoring backed up VM
by santosh 07 Oct '14

07 Oct '14

This is a multi-part MIME message. --=_reb-r3E2C9F17-t5431F02A Content-Type: text/plain; charset="utf-8"; format=flowed Content-Transfer-Encoding: 7bit Hi I am trying to backup and restore the VM using the flow suggester at Features/Backup-Restore API Integration <http://www.ovirt.org/Features/Backup-Restore_API_Integration#VM_Backup.2FRe…> When I tried to restore the VM using the following steps, _*Full Virtual Machine Restoration*_ 1. Create disks for restore 2. Attach the disks for restore to the virtual appliance (Restore the data to it) 3. Detach the disks from the virtual appliance. 4. Create a vm using the configuration that was saved as part of the backup flow - (added capabillity to oVirt as part of the Backup API) 5. Attach the restored disks to the created vm. I encountered following error at step 4. <fault> <reason>Operation Failed</reason> <detail>[Import VM failed - _*VM Id already exist in the system*_. Please remove the VM (RHEL_65_CL1_CLONE2) from the system first]</detail> </fault> I have not deleted/removed the backed up VM from the system. Is it expected behaviour? Should it not overwrite the existing VM or Create new VM with different VM Id, if the backup up VM exists? Thanks, Santosh ***************************Legal Disclaimer*************************** "This communication may contain confidential and privileged material for the sole use of the intended recipient. Any unauthorized review, use or distribution by others is strictly prohibited. If you have received the message by mistake, please advise the sender by reply email and delete the message. Thank you." ********************************************************************** --=_reb-r3E2C9F17-t5431F02A Content-Type: text/html; charset="utf-8" Content-Transfer-Encoding: base64 PGh0bWw+DQogIDxoZWFkPg0KDQogICAgPG1ldGEgaHR0cC1lcXVpdj0iY29udGVudC10eXBl IiBjb250ZW50PSJ0ZXh0L2h0bWw7IGNoYXJzZXQ9dXRmLTgiPg0KICA8L2hlYWQ+DQogIDxi b2R5IGJnY29sb3I9IiNGRkZGRkYiIHRleHQ9IiMwMDAwMDAiPg0KICAgIEhpIDxicj4NCiAg ICA8YnI+DQogICAgSSBhbSB0cnlpbmcgdG8gYmFja3VwIGFuZCByZXN0b3JlIHRoZSBWTSB1 c2luZyB0aGUgZmxvdyBzdWdnZXN0ZXINCiAgICBhdMKgwqAgPGENCmhyZWY9Imh0dHA6Ly93 d3cub3ZpcnQub3JnL0ZlYXR1cmVzL0JhY2t1cC1SZXN0b3JlX0FQSV9JbnRlZ3JhdGlvbiNW TV9CYWNrdXAuMkZSZXN0b3JlX3N1Z2dlc3RlZF9mbG93cyI+RmVhdHVyZXMvQmFja3VwLVJl c3RvcmUNCg0KICAgICAgQVBJIEludGVncmF0aW9uPC9hPjxicj4NCiAgICA8YnI+DQogICAg V2hlbiBJIHRyaWVkIHRvIHJlc3RvcmUgdGhlIFZNIHVzaW5nIHRoZSBmb2xsb3dpbmcgc3Rl cHMsPGJyPg0KICAgIDxicj4NCiAgICA8YnI+DQogICAgPHU+PGI+RnVsbCBWaXJ0dWFsIE1h Y2hpbmUgUmVzdG9yYXRpb248L2I+PC91Pjxicj4NCiAgICA8b2w+DQogICAgICA8bGk+Q3Jl YXRlIGRpc2tzIGZvciByZXN0b3JlPC9saT4NCiAgICAgIDxsaT5BdHRhY2ggdGhlIGRpc2tz IGZvciByZXN0b3JlIHRvIHRoZSB2aXJ0dWFsIGFwcGxpYW5jZSAoUmVzdG9yZQ0KICAgICAg ICB0aGUgZGF0YSB0byBpdCk8L2xpPg0KICAgICAgPGxpPkRldGFjaCB0aGUgZGlza3MgZnJv bSB0aGUgdmlydHVhbCBhcHBsaWFuY2UuPC9saT4NCiAgICAgIDxsaT5DcmVhdGUgYSB2bSB1 c2luZyB0aGUgY29uZmlndXJhdGlvbiB0aGF0IHdhcyBzYXZlZCBhcyBwYXJ0IG9mDQogICAg ICAgIHRoZSBiYWNrdXAgZmxvdyAtIChhZGRlZCBjYXBhYmlsbGl0eSB0byBvVmlydCBhcyBw YXJ0IG9mIHRoZQ0KICAgICAgICBCYWNrdXAgQVBJKTwvbGk+DQogICAgICA8bGk+QXR0YWNo IHRoZSByZXN0b3JlZCBkaXNrcyB0byB0aGUgY3JlYXRlZCB2bS48L2xpPg0KICAgIDwvb2w+ DQogICAgSSBlbmNvdW50ZXJlZCBmb2xsb3dpbmcgZXJyb3IgYXQgc3RlcCA0Ljxicj4NCiAg ICA8YnI+DQogICAgPGJsb2NrcXVvdGU+PGZvbnQgY29sb3I9IiNjYzAwMDAiPiZsdDtmYXVs dCZndDs8YnI+DQogICAgICAgIMKgwqDCoCAmbHQ7cmVhc29uJmd0O09wZXJhdGlvbiBGYWls ZWQmbHQ7L3JlYXNvbiZndDs8YnI+DQogICAgICAgIMKgwqDCoCAmbHQ7ZGV0YWlsJmd0O1tJ bXBvcnQgVk0gZmFpbGVkIC0gPHU+PGI+Vk0gSWQgYWxyZWFkeSBleGlzdA0KICAgICAgICAg ICAgaW4gdGhlIHN5c3RlbTwvYj48L3U+LiBQbGVhc2UgcmVtb3ZlIHRoZSBWTQ0KICAgICAg ICAoUkhFTF82NV9DTDFfQ0xPTkUyKSBmcm9tIHRoZSBzeXN0ZW0gZmlyc3RdJmx0Oy9kZXRh aWwmZ3Q7PGJyPg0KICAgICAgICAmbHQ7L2ZhdWx0Jmd0OzwvZm9udD48YnI+DQogICAgPC9i bG9ja3F1b3RlPg0KICAgIDxicj4NCiAgICBJIGhhdmUgbm90IGRlbGV0ZWQvcmVtb3ZlZCB0 aGUgYmFja2VkIHVwIFZNIGZyb20gdGhlIHN5c3RlbS48YnI+DQogICAgPGJyPg0KICAgIElz IGl0IGV4cGVjdGVkIGJlaGF2aW91cj8gPGJyPg0KICAgIFNob3VsZCBpdCBub3Qgb3Zlcndy aXRlIHRoZSBleGlzdGluZyBWTSBvciBDcmVhdGUgbmV3IFZNIHdpdGgNCiAgICBkaWZmZXJl bnQgVk0gSWQsIGlmIHRoZSBiYWNrdXAgdXAgVk0gZXhpc3RzPzxicj4NCiAgICA8YnI+DQog ICAgwqA8YnI+DQogICAgVGhhbmtzLCBTYW50b3NoDQogIDwvYm9keT4NCjwvaHRtbD4NCg0K DQo8cHJlPg0KDQoqKioqKioqKioqKioqKioqKioqKioqKioqKipMZWdhbCBEaXNjbGFpbWVy KioqKioqKioqKioqKioqKioqKioqKioqKioqDQoiVGhpcyBjb21tdW5pY2F0aW9uIG1heSBj b250YWluIGNvbmZpZGVudGlhbCBhbmQgcHJpdmlsZWdlZCBtYXRlcmlhbCBmb3IgdGhlDQpz b2xlIHVzZSBvZiB0aGUgaW50ZW5kZWQgcmVjaXBpZW50LiBBbnkgdW5hdXRob3JpemVkIHJl dmlldywgdXNlIG9yIGRpc3RyaWJ1dGlvbg0KYnkgb3RoZXJzIGlzIHN0cmljdGx5IHByb2hp Yml0ZWQuIElmIHlvdSBoYXZlIHJlY2VpdmVkIHRoZSBtZXNzYWdlIGJ5IG1pc3Rha2UsDQpw bGVhc2UgYWR2aXNlIHRoZSBzZW5kZXIgYnkgcmVwbHkgZW1haWwgYW5kIGRlbGV0ZSB0aGUg bWVzc2FnZS4gVGhhbmsgeW91LiINCioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioq KioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKio8L3ByZT4NCg== --=_reb-r3E2C9F17-t5431F02A--

3 3

Harmful to rename a cluster?
by Nicolas Ecarnot 07 Oct '14

07 Oct '14

Hi, For reasons beyond sanity, I will have to rename a cluster to something, then rename it back to its previous name. - Is it only a label with no impact on a production datacenter? - Will it be possible to rename it back? Won't oVirt remember a previous similar name was used and prevent me from doing so? Thank you -- Nicolas Ecarnot

3 3

Proper way to change and persist vdsm configuration options
by Trey Dockendorf 07 Oct '14

07 Oct '14

I'm running ovirt nodes that are stock CentOS 6.5 systems with VDSM installed. I am using iSER to do iSCSI over RDMA and to make that work I have to modify /etc/vdsm/vdsm.conf to include the following: [irs] iscsi_default_ifaces = iser,default I've noticed that any time I upgrade a node from the engine web interface that changes to vdsm.conf are wiped out. I don't know if this is being done by the configuration code or by the vdsm package. Is there a more reliable way to ensure changes to vdsm.conf are NOT removed automatically? Thanks, - Trey

8 33

Network usage is not updating in the ovirt panel
by Shanil S 07 Oct '14

07 Oct '14

Hi, We are using the ovirt version 3.4.3, it seems the network usage is not showing correctly in the ovirt panel. What may be the reasons ? I have attached the screenshots, please check it. -- Regards Shanil

2 5

[QE][ACTION REQUIRED] oVirt 3.5.0 status - Go / No Go
by Sandro Bonazzola 07 Oct '14

07 Oct '14

Hi, We started composing oVirt 3.5.0 GA yesterday 2014-10-06 and we finished collecting rpms this morning. While we would have liked to be able to release it, bugzilla shows 2 new fresh blockers, so it's another No Go. The bug tracker [1] shows 2 blockers: Bug ID Whiteboard Status Summary 1149637 virt ASSIGNED Cannot start VM with attached ISO 1149705 storage NEW VM abnormal stop after LV refreshing when using thin provisioning on block storage This means a RC5 build will be issued once the above 2 bugs will be fixed and GA will follow after testing. Please provide an ETA for above bugs. The bugs keyworded as Regression have been reviewed by maintainers and not marked as blockers[4] Features completed are marked in green on Features Status Table [2] There are still 33 bugs [3] targeted to 3.5.0 which will be moved automatically to 3.5.1 once the build will be released. Maintainers / Assignee: If you're aware of something that should block the release, please raise it as soon as possible. [1] http://bugzilla.redhat.com/1073943 [2] http://goo.gl/4SuYdE [3] http://red.ht/1pVEk7H [4] http://goo.gl/uavikG Thanks, -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 0

Add additional iSCSI path in ovirt 3.3.4
by Thomas Scofield 07 Oct '14

07 Oct '14

I am trying to add a second path to my iSCSI LUNs but I can’t get the changes to persist. I can get the SPM to login to the second path, and from the server side the multipath –ll output looks good. I can then move the SPM around to force all the other systems to login to the iSCSI LUNs. But when I reboot a node I lose the second path. I have also been searching through the database to see what might be missing on the backend and I noticed that the second path is not listed in the storage_server_connections table. I tried adding an entry for the second path, but that did not resolve the problem. What is the proper way to add an additional path?

2 1

Re: [ovirt-users] Can not configure with simple LDAP.
by Fumihide Tani 06 Oct '14

06 Oct '14

Hi, Alon, Without waiting until the weekend, I have finished the flesh install of the oVirt 3.5 RC3 today. As a result, with same AAA settings, My OpenLDAP's users became possible to login to the Web User Portal now. Yes, RC3 is good for integrating with newest OpenLDAP 2.4.23, RC2 is not. Very much thanks, Fumihide Tani (2014/09/25 7:27), Alon Bar-Lev wrote: > This is severe, the upgrade is not working properly you have issues with accessing database. > If database is not important I suggest a fresh install, run engine-cleanup then engine-setup. > If database is important please forward this to devel mailing list for someone to help, regardless of LDAP. > Regards, > Alon > > > 4-09-25 00:36:08,389 ERROR [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (DefaultQuartzScheduler_Worker-7) ArrayIndexOutOfBoundsException: 1: java.lang.ArrayIndexOutOfBoundsException: 1 > at org.ovirt.engine.core.dao.VdsNumaNodeDAODbFacadeImpl.getDistanceMap(VdsNumaNodeDAODbFacadeImpl.java:208) [dal.jar:] > at org.ovirt.engine.core.dao.VdsNumaNodeDAODbFacadeImpl.access$000(VdsNumaNodeDAODbFacadeImpl.java:20) [dal.jar:] > at org.ovirt.engine.core.dao.VdsNumaNodeDAODbFacadeImpl$1.mapRow(VdsNumaNodeDAODbFacadeImpl.java:184) [dal.jar:] > at org.ovirt.engine.core.dao.VdsNumaNodeDAODbFacadeImpl$1.mapRow(VdsNumaNodeDAODbFacadeImpl.java:168) [dal.jar:] > > > ----- Original Message ----- >> From: "Fumihide Tani" <RXC05271(a)nifty.com> >> To: "Alon Bar-Lev" <alonbl(a)redhat.com> >> Sent: Wednesday, September 24, 2014 6:40:58 PM >> Subject: Re: [ovirt-users] Can not configure with simple LDAP. >> >> Result of running engine-setup: >> [root@ovirt ~]# yum list installed|grep ovirt-engine >> ovirt-engine.noarch 3.5.0-0.0.master.20140923231936.git42065cc.el6 >> >> Yes, engine is updated to newest one.! >> >> But I still continued failing to login. >> engine.log attached. >> >> Very thanks, >> >> (2014/09/24 23:59), Alon Bar-Lev wrote: >>> you probably need to run engine-setup >>> >>> ----- Original Message ----- >>>> From: "Fumihide Tani" <RXC05271(a)nifty.com> >>>> To: "Alon Bar-Lev" <alonbl(a)redhat.com> >>>> Sent: Wednesday, September 24, 2014 4:59:22 PM >>>> Subject: Re: [ovirt-users] Can not configure with simple LDAP. >>>> >>>> Oops! >>>> # yum list installed | grep ovirt-engine >>>> ovirt-engine.noarch 3.5.0-0.0.master.20140821064931.gitb794d66.el6 >>>> (snip) >>>> ..... >>>> >>>> Many ovirt-3.5-* modules are updated by yum today but engine is not. >>>> Why not updated to RC3?? >>>> >>>> >>>> (2014/09/24 22:42), Alon Bar-Lev wrote: >>>>> Unless I am missing something, you run old engine: >>>>> >>>>> 2014-09-24 22:16:24,136 INFO [org.ovirt.engine.core.bll.Backend] (MSC >>>>> service thread 1-12) Running ovirt-engine >>>>> 3.5.0-0.0.master.20140821064931.gitb794d66.el6 >>>>> >>>>> >>>>> >>>>> ----- Original Message ----- >>>>>> From: "Fumihide Tani" <RXC05271(a)nifty.com> >>>>>> To: "Alon Bar-Lev" <alonbl(a)redhat.com> >>>>>> Sent: Wednesday, September 24, 2014 4:21:09 PM >>>>>> Subject: Re: [ovirt-users] Can not configure with simple LDAP. >>>>>> >>>>>> Attached engine.log with "FINEST" >>>>>> >>>>>> Thanks, >>>>>> >>>>>> (2014/09/24 21:32), Alon Bar-Lev wrote: >>>>>>> ----- Original Message ----- >>>>>>>> From: "Fumihide Tani" <RXC05271(a)nifty.com> >>>>>>>> To: "Alon Bar-Lev" <alonbl(a)redhat.com> >>>>>>>> Cc: users(a)ovirt.org >>>>>>>> Sent: Wednesday, September 24, 2014 3:24:23 PM >>>>>>>> Subject: Re: [ovirt-users] Can not configure with simple LDAP. >>>>>>>> >>>>>>>> Hi, Alon, >>>>>>>> >>>>>>>> I have updated the oVirt 3.5 RC2 to the newest RC3 today. >>>>>>>> >>>>>>>> From my CentOS6.5 based oVirt Engine server and the oVirt Host >>>>>>>> server, >>>>>>>> # yum clean all >>>>>>>> # yum update >>>>>>>> Then rebooted these servers. >>>>>>>> >>>>>>>> But my LDAP problem is continued and same result as before. >>>>>>>> >>>>>>>> When I login to the oVirt User Portal, >>>>>>>> User Name: tani >>>>>>>> Password: (OpenLDAP's userPassword) >>>>>>>> Domain: rxc05271.com >>>>>>>> >>>>>>>> UI displays "General command validation failure." >>>>>>>> >>>>>>>> Please advice. >>>>>>> Hopefully I can if you provide log... :) >>>>>>> >>>>>>>> Thanks, >>>>>>>> Fumihide Tani >>>>>>>> >>>>>>>> (2014/09/22 22:20), Alon Bar-Lev wrote: >>>>>>>>> The version of engine you are using is probably out of date and >>>>>>>>> unsynced >>>>>>>>> with latest ldap package (20140821064931). >>>>>>>>> Please make sure you take latest from[1] >>>>>>>>> Thanks! >>>>>>>>> >>>>>>>>> [1] http://resources.ovirt.org/pub/ovirt-3.5-snapshot/ >>>>>>>>> >>>>>>>>> ----- Original Message ----- >>>>>>>>>> From: "Fumihide Tani" <RXC05271(a)nifty.com> >>>>>>>>>> To: "Alon Bar-Lev" <alonbl(a)redhat.com> >>>>>>>>>> Cc: users(a)ovirt.org >>>>>>>>>> Sent: Monday, September 22, 2014 3:42:52 PM >>>>>>>>>> Subject: Re: [ovirt-users] Can not configure with simple LDAP. >>>>>>>>>> >>>>>>>>>> Hi, Alon, >>>>>>>>>> >>>>>>>>>> Your requested engine.log attached. >>>>>>>>>> >>>>>>>>>> Also, I tried to login to web user portal by "tani" >>>>>>>>>> >>>>>>>>>> User Name: tani >>>>>>>>>> Password: (OpenLDAP userPassword) >>>>>>>>>> Domain: rxc05271.com >>>>>>>>>> >>>>>>>>>> cause: "General command validation failure." >>>>>>>>>> >>>>>>>>>> Attated log includes login by "Fumihide" first, "tani" second. >>>>>>>>>> >>>>>>>>>> Very thanks, >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> (2014/09/22 21:24), Alon Bar-Lev wrote: >>>>>>>>>>> ----- Original Message ----- >>>>>>>>>>>> From: "Fumihide Tani" <RXC05271(a)nifty.com> >>>>>>>>>>>> To: "Alon Bar-Lev" <alonbl(a)redhat.com> >>>>>>>>>>>> Cc: users(a)ovirt.org >>>>>>>>>>>> Sent: Monday, September 22, 2014 3:06:39 PM >>>>>>>>>>>> Subject: Re: [ovirt-users] Can not configure with simple LDAP. >>>>>>>>>>>> >>>>>>>>>>>> Sorry, I misunderstood. >>>>>>>>>>>> >>>>>>>>>>>> This is outputs after LDAP user logged in. >>>>>>>>>>> Please attach log as files, not inline, easier to handle. >>>>>>>>>>> >>>>>>>>>>> 2014-09-22 21:01:32,638 DEBUG >>>>>>>>>>> [org.ovirt.engineextensions.aaa.ldap.Framework] >>>>>>>>>>> (ajp--127.0.0.1-8702-4) >>>>>>>>>>> SearchRequest: SearchRequest(baseDN='dc=rxc05271,dc=com', >>>>>>>>>>> scope=SUB, >>>>>>>>>>> deref=NEVER, sizeLimit=0, timeLimit=0, >>>>>>>>>>> filter='&(objectClass=uidObject)(uid=*)(uid=Fumihide)', >>>>>>>>>>> attrs={entryUUID, >>>>>>>>>>> uid, displayName, memberOf, department, givenName, sn, title, >>>>>>>>>>> mail}, >>>>>>>>>>> controls={SimplePagedResultsControl(pageSize=100, >>>>>>>>>>> isCritical=false)}) >>>>>>>>>>> 2014-09-22 21:01:32,640 DEBUG >>>>>>>>>>> [org.ovirt.engineextensions.aaa.ldap.Framework] >>>>>>>>>>> (ajp--127.0.0.1-8702-4) >>>>>>>>>>> SearchResult: SearchResult(resultCode=0 (success), messageID=3, >>>>>>>>>>> entriesReturned=0, referencesReturned=0, >>>>>>>>>>> responseControls={SimplePagedResultsControl(pageSize=0, >>>>>>>>>>> isCritical=false)}) >>>>>>>>>>> >>>>>>>>>>> >From the above I see that a search was issued: >>>>>>>>>>>> &(objectClass=uidObject)(uid=*)(uid=Fumihide) >>>>>>>>>>> And no result returned. >>>>>>>>>>> >>>>>>>>>>> Per previous output: >>>>>>>>>>> --- >>>>>>>>>>> # tani, Users, rxc05271.com >>>>>>>>>>> dn: uid=tani,ou=Users,dc=rxc05271,dc=com >>>>>>>>>>> objectClass: inetOrgPerson >>>>>>>>>>> objectClass: uidObject >>>>>>>>>>> uid: tani >>>>>>>>>>> cn: Fumihide Tani >>>>>>>>>>> givenName: Fumihide >>>>>>>>>>> mail: tani(a)rxc05271.com >>>>>>>>>>> sn: Tani >>>>>>>>>>> userPassword:: a3VtaXRhbg== >>>>>>>>>>> --- >>>>>>>>>>> >>>>>>>>>>> Your user name is tani and not Fumihide. >>>>>>>>>>> >>>>>>>>>>> Alon >>>>>>>>>>> >>>>>>>>>>> >>>> >> >

2 13

oVirt Power Management with Intel server board S2400BB RMM4
by Алексей Николаев 06 Oct '14

06 Oct '14

Hi all! Can anyone advice me howto use ovirt power management with intel server board RMM4 module for HA?

3 2

IDrac7 enter
by Ilya Fedotov 06 Oct '14

06 Oct '14

Hello, Anybody knows, how can install Power Options with IDrac7 ent lic? I рфму tried different parameters|: for example: Type IDRAC7 login password options none or Type ipmilan login password options none Doesnt work Any ideas? thanks for help Ilya

3 2

Has some one experience with ovirt-node+ Quagga=HArouting for VMs?
by Arman Khalatyan 06 Oct '14

06 Oct '14

hi,Can some one please give an advice how to make an HA-routing for VMs? I wish if my R1 is down then HA-VMs are routed over R2 and vice-versa. Should I run Zebra on hosts or it is not recommended? My HW configuration is following. R1 R2 | | 4hosts----SW----~200m~----SW----4hosts | | | | | | HA-VMs HA-VMs Thanks, Arman.

1 0

[QE][ACTION REQUIRED] oVirt 3.5.0 status - Go / No Go
by Sandro Bonazzola 06 Oct '14

06 Oct '14

Hi, We are going to start composing oVirt 3.5.0 GA today 2014-10-06 as soon as the ovirt-engine package finish to build. The bug tracker [1] shows no blockers: The bugs keyworded as Regression have been reviewed by maintainers and not marked as blockers[4] Features completed are marked in green on Features Status Table [2] There are still 34 bugs [3] targeted to 3.5.0 which will be moved automatically to 3.5.1 once the build will be released. Maintainers / Assignee: If you're aware of something that should block the release, please raise it as soon as possible. [1] http://bugzilla.redhat.com/1073943 [2] http://goo.gl/4SuYdE [3] http://red.ht/1pVEk7H [4] http://goo.gl/uavikG Thanks, -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 0

Re: [ovirt-users] ovirt-3.5 ovirt-guest-agent linux builds are now available
by Nick Kesick 06 Oct '14

06 Oct '14

On Oct 5, 2014 6:31 PM, "Nick Kesick" <cybertimber2005(a)gmail.com> wrote: > > > ---------- Forwarded message ---------- > > From: Gianluca Cecchi <gianluca.cecchi(a)gmail.com> > > To: Bob Doolittle <bob(a)doolittle.us.com> > > Cc: "devel(a)ovirt.org" <devel(a)ovirt.org>, "Users(a)ovirt.org List" < Users(a)ovirt.org> > > Date: Thu, 2 Oct 2014 21:19:40 +0200 > > Subject: Re: [ovirt-users] [ovirt-devel] ovirt-3.5 ovirt-guest-agent linux builds are now available > > On Thu, Oct 2, 2014 at 8:34 PM, Bob Doolittle <bob(a)doolittle.us.com> wrote: > >> > >> I can't seem to find any spec for the "usual guest OBS repositories" for guest-agent on Ubuntu. It's not specified on this page: > >> > >> http://www.ovirt.org/How_to_install_the_guest_agent_in_Ubuntu > >> > >> Note that this page and the pages it references probably need updating, since it's supposed to provide links to all relevant info for all platforms: > >> http://www.ovirt.org/Understanding_Guest_Agents_and_Other_Tools#Linux_Guests > >> > >> Pointer for Ubuntu please? > >> > >> Thanks, > >> Bob > >> > > > > I think correct link is what I referred in my first answer and that I used: > > http://www.ovirt.org/Feature/GuestAgentUbuntu > > > > In that page we have the timestamp and tested version of > > Name: oVirt Guest Agent on Ubuntu > > Modules: ovirt-guest-agent > > Target version: 3.4.1 > > Status: Done > > Last updated: 2014-08-05 by Vfeenstr > > > > That is valid also for 3.5rc3 and ubuntu 14.04 > > > > I edited the page > > http://www.ovirt.org/Understanding_Guest_Agents_and_Other_Tools#Linux_Guests > > > > pointing to my referred page. > > Let me know if ok for all.... > > > > Gianluca > > > I'm biased here as the author of the 'Understanding' page and the how to install page, but I feel the how to install page should be updated. It is more friendly for less savvy users and focuses on install information. No confusing Dev talk. > > But, I would also be fine updating the feature pages with more friendly install instructions if that would be better.

1 0

Re: [ovirt-users] Users Digest, Vol 37, Issue 11
by Nick Kesick 06 Oct '14

06 Oct '14

> ---------- Forwarded message ---------- > From: Gianluca Cecchi <gianluca.cecchi(a)gmail.com> > To: Bob Doolittle <bob(a)doolittle.us.com> > Cc: "devel(a)ovirt.org" <devel(a)ovirt.org>, "Users(a)ovirt.org List" < Users(a)ovirt.org> > Date: Thu, 2 Oct 2014 21:19:40 +0200 > Subject: Re: [ovirt-users] [ovirt-devel] ovirt-3.5 ovirt-guest-agent linux builds are now available > On Thu, Oct 2, 2014 at 8:34 PM, Bob Doolittle <bob(a)doolittle.us.com> wrote: >> >> I can't seem to find any spec for the "usual guest OBS repositories" for guest-agent on Ubuntu. It's not specified on this page: >> >> http://www.ovirt.org/How_to_install_the_guest_agent_in_Ubuntu >> >> Note that this page and the pages it references probably need updating, since it's supposed to provide links to all relevant info for all platforms: >> http://www.ovirt.org/Understanding_Guest_Agents_and_Other_Tools#Linux_Guests >> >> Pointer for Ubuntu please? >> >> Thanks, >> Bob >> > > I think correct link is what I referred in my first answer and that I used: > http://www.ovirt.org/Feature/GuestAgentUbuntu > > In that page we have the timestamp and tested version of > Name: oVirt Guest Agent on Ubuntu > Modules: ovirt-guest-agent > Target version: 3.4.1 > Status: Done > Last updated: 2014-08-05 by Vfeenstr > > That is valid also for 3.5rc3 and ubuntu 14.04 > > I edited the page > http://www.ovirt.org/Understanding_Guest_Agents_and_Other_Tools#Linux_Guests > > pointing to my referred page. > Let me know if ok for all.... > > Gianluca > I'm biased here as the author of the 'Understanding' page and the how to install page, but I feel the how to install page should be updated. It is more friendly for less savvy users and focuses on install information. No confusing Dev talk. But, I would also be fine updating the feature pages with more friendly install instructions if that would be better.

1 0

using ovirt-shell to attach defind network to hosts
by Vladimir Pakhomov 05 Oct '14

05 Oct '14

Hi, I would like to implement a script that would attach a newly created network to all hosts in cluster. Unfortunately I cannot find anything about that in documentation. Is it possible to attach network to host using CLI/REST API? Kind regards, Vladimir Pakhomov

4 5

API -- Do I need to use templates? Can I change network for the nic?
by Morgan McLean 05 Oct '14

05 Oct '14

Hi, Trying to remotely spawn a large amount of VM's. It would appear I can only use templates...which would have a NIC stuck to one network vlan. It doesn't appear that I can change that vlan remotely. Is there any easy way I can get this done? Thanks, Morgan

6 10

Falsely detected network device status
by Lewis Shobbrook 05 Oct '14

05 Oct '14

Hi All, I've encountered a network device that is being falsely detected as down. On adding a new network to a 3.4 hosted engine, one of the two hosts is displaying a component interface as down with the webadmin console. Ethtool confirms the link status as up and connectivity through the corresponding interfaces of the network has been proven. Shortly after adding the network I noted that the node with the falsely detected iface status, was set Non-Operational. All running VM's evacuated. The engine.log showing... INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler_Worker-33) [2daa7788] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: Host hosted_engine_2 moved to Non-Operational state because interfaces 'eth1' are down but are needed by networks 'EVD_DMZ' in the current cluster 2 other interfaces for ovirtmgmt and another VM network on this same host have long functioned perfectly well. When assigning the network to the interface I see the following in messages... Oct 1 20:57:39 lx004 kernel: ADDRCONF(NETDEV_UP): eth1: link is not ready Oct 1 20:57:39 lx004 kernel: 8021q: adding VLAN 0 to HW filter on device eth1 Oct 1 20:57:39 lx004 kernel: device eth1 entered promiscuous mode Oct 1 20:57:40 lx004 kernel: igb: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX Oct 1 20:57:40 lx004 kernel: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready Oct 1 20:57:40 lx004 kernel: EVD_DMZ: port 1(eth1) entering forwarding state Looks as it should to me, brctl also shows the bridge is as it should be. # brctl show bridge name bridge id STP enabled interfaces ;vdsmdummy; 8000.000000000000 no EVD_DMZ 8000.0025901abc49 no eth1 PXE 8000.0007e9a5a197 no eth3 ovirtmgmt 8000.0025901abc48 no eth0 Not able to see anything relevant in vdsm.log vdsClient -s 0 getVdsStats does not list the new network, but instead lists an older deleted one. Has any one encountered an event like this or have any clues on how this might be failing?

2 2

oVirt user portal to pass environment variable to vm
by Pat Pierson 05 Oct '14

05 Oct '14

Is there a way to pass oVirt user login details(name) to the vm in the form of an environment variable to the vm? Would that be something Cloud-init or Ovirt-guest-agent handles? -- Patrick Pierson

3 2