- Users - oVirt List Archives

Re: [Users] VM not starting up
by Nauman Abbas 31 Dec '13

31 Dec '13

Vdsm.log is not going through since its too big to send. On Tue, Dec 31, 2013 at 12:39 PM, Nauman Abbas <nauman.abbas(a)seecs.edu.pk>wrote: > Sending files one by one. Vdsm.log > > > On Tue, Dec 31, 2013 at 11:48 AM, Meital Bourvine <mbourvin(a)redhat.com>wrote: > >> Engine log can be found on the engine (while vdsm.log is on the host). >> The full path is - /var/log/ovirt-engine/engine.log >> >> audit.log - /var/log/audit/audit.log >> >> About the vdsm log - I don't see any error there, I think that you cut >> too much from it. >> >> ------------------------------ >> >> *From: *"Nauman Abbas" <nauman.abbas(a)seecs.edu.pk> >> *To: *"Meital Bourvine" <mbourvin(a)redhat.com> >> *Cc: *"users(a)ovirt.org" <Users(a)ovirt.org> >> *Sent: *Tuesday, December 31, 2013 8:42:43 AM >> *Subject: *Re: [Users] VM not starting up >> >> >> Hello Meital >> >> SELinux is off. The cluster doesn't work if SELinux is on, my hosts and >> storage is showing up as okay but VM is not starting up. >> >> I've managed to get vdsm.log but cannot find engine.log and audit.log. >> Sorry for being a noob, if you can tell me the path to these files I'll >> send them right away. >> >> >> On Tue, Dec 31, 2013 at 11:17 AM, Meital Bourvine <mbourvin(a)redhat.com>wrote: >> >>> Hi Nauman, >>> >>> Maybe it's a selinux issue? >>> Please try running `setenforce 0` before starting the vm. >>> >>> Also please attach engine.log, vdsm.log, and audit.log >>> >>> ------------------------------ >>> >>> *From: *"Nauman Abbas" <nauman.abbas(a)seecs.edu.pk> >>> *To: *"users(a)ovirt.org" <Users(a)ovirt.org> >>> *Sent: *Tuesday, December 31, 2013 7:13:01 AM >>> *Subject: *[Users] VM not starting up >>> >>> >>> Hello all, >>> >>> First of all thank you for your help, I've finally managed to get my >>> Cluster configured properly but now that I create VMs I'm facing another >>> problem. Whenever I start my VM I get this error. >>> >>> "VM TestVm is down. Exit message: Child quit during startup handshake: >>> Input/output error." >>> >>> I've googled around but haven't found any satisfactory solution. If >>> anyone can help out it would be great. >>> >>> Regards >>> >>> Nauman Abbas >>> Assistant System Administrator (LMS), >>> Room No. A-207, SEECS, >>> National University of Sciences & Technology, >>> + 92 321 5359946 >>> >>> _______________________________________________ >>> Users mailing list >>> Users(a)ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >>> >>> >> >> >> -- >> >> Nauman Abbas >> Assistant System Administrator (LMS), >> Room No. A-207, SEECS, >> National University of Sciences & Technology, >> + 92 321 5359946 >> >> >> > > > -- > > Nauman Abbas > Assistant System Administrator (LMS), > Room No. A-207, SEECS, > National University of Sciences & Technology, > + 92 321 5359946 > -- Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946

1 0

[Users] Ovirt Network
by Maurice James 31 Dec '13

31 Dec '13

------=_NextPart_000_0031_01CF0591.FE999AB0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Ok noob question here. I have 1 physical nic on all both of my hosts. Shouldn't I be able to create multiple virtual networks? ------=_NextPart_000_0031_01CF0591.FE999AB0 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" = xmlns:o=3D"urn:schemas-microsoft-com:office:office" = xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" = xmlns=3D"http://www.w3.org/TR/REC-html40"><head><meta = http-equiv=3DContent-Type content=3D"text/html; = charset=3Dus-ascii"><meta name=3DGenerator content=3D"Microsoft Word 15 = (filtered medium)"><style></style></head><body lang=3DEN-US = link=3D"#0563C1" vlink=3D"#954F72"><div class=3DWordSection1>Ok noob question here. I have 1 physical nic on all = both of my hosts. Shouldn’t I be able to create multiple virtual = networks?<o:p></o:p></div></body></html> ------=_NextPart_000_0031_01CF0591.FE999AB0--

2 1

[Users] VM not starting up
by Nauman Abbas 31 Dec '13

31 Dec '13

Hello all, First of all thank you for your help, I've finally managed to get my Cluster configured properly but now that I create VMs I'm facing another problem. Whenever I start my VM I get this error. "VM TestVm is down. Exit message: Child quit during startup handshake: Input/output error." I've googled around but haven't found any satisfactory solution. If anyone can help out it would be great. Regards Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946

2 3

[Users] python-sdk : how to modify a vm to "Run on" a "Specific" host and set "Migration Options
by karthik S 31 Dec '13

31 Dec '13

Dear Users, I am karthik, based in Mountain View, CA. I have been using python ovirtsdk for QA Automation tests for RHEV-M for past two months. My knowledge on ovirtsdk is intermittent at this stage. I want to do the below actions that we do on rhev-M using python ovirtsdk. On, RHEV-M UI ============ 1) right click a offline VM >> Edit >> Host >> "Run On:" >> Specific >. choose a hostname 2) right click a offline VM >> Edit >> Host >> "Migration Options:" >> "Do not allow migration" python Code: ========== 1) The VM was imported from export domain to my storage_domain using the code def import_vm(self, source_vm_name, dest_vm_name, storage_domain_name, rhev_host_name=None, cluster_name="Default", async=False): """ Import VM From a Export domain into your storage domain """ timeoutSec=1800 pollInterval=2 exportStorageDomain = self.api.storagedomains.list(type_="export")[0] actionParams = params.Action( storage_domain=self.api.storagedomains.get(storage_domain_name), cluster=self.api.clusters.get("Default"), clone=1, vm = params.VM (name=dest_vm_name, snapshots=params.Snapshots(collapse_snapshots=1), disks = params.Disks(clone = 1), host = params.Host(name=rhev_host_name) )) exportStorageDomain.vms.get(source_vm_name).import_vm(actionParams) start = time.time() while self.api.vms.get(dest_vm_name).status.state != 'down': if time.time() - start > timeoutSec: raise Exception("Timed out (%s) waiting for %s to obtain down status" % (timeoutSec, vm_name)) time.sleep(pollInterval) return self.api.vms.get(name=dest_vm_name)[0] Issue : Upon import, this method did not set the "Run as" to the specified host but "Run as" was set to "Any host in the cluster". Am I missing something ? 2) Secondly, I tried modifying the VM "Run as" hostname with the below code >>> api = API (url = "xx" , username ="XX", pasword ="XX", ca_file = "ca") >>> vm_obj = api.vms.list(name="test_vm_101")[0] >>> vm_obj.set_host="rhev1" >>> vm_obj.update() This did not help either. Seems I am missing something.. 3) finally how to set " "Migration Options" ? Your help would appreciated and will help me to get greater understanding of the SDK itself. Thanks, Karthik

2 2

[Users] Attach nfs domain to gluster dc
by Juan Pablo Lorier 30 Dec '13

30 Dec '13

Hi, I've created a new DC in order of been able to create vms on a glusterfs data domain. As ovirt does not allow to share export and iso domains between DCs (nice RFE) I detach those from the actual DC and when I try to attach them to the new DC, I get an error: 2013-12-10 15:19:28,558 ERROR [org.ovirt.engine.core.bll.storage.NFSStorageHelper] (pool-6-thread-46) The connection with details 192.168.128.81:/home/exports/export failed because of error code 477 and error message is: problem while trying to mount target 2013-12-10 15:19:28,577 ERROR [org.ovirt.engine.core.bll.storage.ConnectStorageToVdsCommand] (pool-6-thread-46) Transaction rolled-back for command: org.ovirt.engine.core.bll.storage.ConnectStorageToVdsCommand. 2013-12-10 15:19:28,578 ERROR [org.ovirt.engine.core.bll.storage.NFSStorageHelper] (pool-6-thread-41) The connection with details 192.168.128.81:/home/exports/export failed because of error code 477 and error message is: problem while trying to mount target 2013-12-10 15:19:28,587 ERROR [org.ovirt.engine.core.bll.storage.ConnectStorageToVdsCommand] (pool-6-thread-41) Transaction rolled-back for command: org.ovirt.engine.core.bll.storage.ConnectStorageToVdsCommand. But if I mount the nfs share manually from the hosts, I have no problems. I've been having issues with nfs since I updated to 3.3.1, I have the nfs shares in one of the hosts of the iscsi domain and the other host complaints about not been ablo to access the domains from time to time. The host where the shares are never complaints. Any hints? Regards,

6 14

[Users] ovirt-engine 3.3.2 on F20
by Earl Potter 30 Dec '13

30 Dec '13

I'm having a bit of a struggle getting ovirt-engine to install on an F20 box. I first install ovirt-release-fedora.noarch which sets up /etc/yum.repos.d/ovirt.repo and points to $releasever. However, there doesn't seem to be any F20 ovirt repos. Yum is trying to look here: http://resources.ovirt.org/releases/3.3.2/rpm/Fedora/20/ But it seems 3.3.2 is located here: http://resources.ovirt.org/releases/3.3.2/rpm/Fedora/19/ I try changing the repo definition and most everything looks like it's going to install. however, it ends w/ a file conflict between two packages, ovirt-log-collector and sos from F20. Transaction check error: file /usr/lib/python2.7/site-packages/sos/plugins/postgresql.py from install of ovirt-log-collector-3.3.2-2.fc19.noarch conflicts with file from package sos-3.0-3.fc20.noarch file /usr/lib/python2.7/site-packages/sos/plugins/postgresql.pyc from install of ovirt-log-collector-3.3.2-2.fc19.noarch conflicts with file from package sos-3.0-3.fc20.noarch file /usr/lib/python2.7/site-packages/sos/plugins/postgresql.pyo from install of ovirt-log-collector-3.3.2-2.fc19.noarch conflicts with file from package sos-3.0-3.fc20.noarch I'm not really certain how to work around this short of installing an F19 system. Any thoughts would be appreciated. Thank you, Earl

3 2

[Users] errors after node update
by Michael Wagenknecht 30 Dec '13

30 Dec '13

Hi, today I have updated one of our nodes to vdsm-4.13.2-1.el6.x86_64. Now I get the following messages in /var/log/messages: Dec 30 12:54:19 ovirt01 vdsm vm.Vm ERROR vmId=`4a2ab2ff-74ee-4908-b5fc-d903904969e9`::Stats function failed: <AdvancedStatsFunction _highWrite at 0x1658fb8>#012Traceback (most recent call last):#012 File "/usr/share/vdsm/sampling.py", line 351, in collect#012 statsFunction()#012 File "/usr/share/vdsm/sampling.py", line 226, in __call__#012 retValue = self._function(*args, **kwargs)#012 File "/usr/share/vdsm/vm.py", line 525, in _highWrite#012 self._vm.extendDrivesIfNeeded()#012 File "/usr/share/vdsm/vm.py", line 2285, in extendDrivesIfNeeded#012 capacity, alloc, physical = self._dom.blockInfo(drive.path, 0)#012 File "/usr/share/vdsm/vm.py", line 838, in f#012 ret = attr(*args, **kwargs)#012 File "/usr/lib64/python2.6/site-packages/vdsm/libvirtconnection.py", line 76, in wrapper#012 ret = f(*args, **kwargs)#012 File "/usr/lib64/python2.6/site-packages/libvirt.py", line 1797, in blockInfo#012 if ret is None: raise libvirtError ('virDomainGetBlockInfo() failed', dom=self)#012libvirtError: invalid argument: invalid path /rhev/data-center/mnt/blockSD/88f22219-83b5-4597-93a9-f14a06818cea/images/41769225-b919-49d9-9cd6-bdf4fdd9e800/0f572a47-690d-4698-b4ce-e499a578d05a not assigned to domain Dec 30 12:54:19 ovirt01 vdsm vm.Vm ERROR vmId=`30201f68-c905-4c29-a350-314d6e1bfc42`::Stats function failed: <AdvancedStatsFunction _highWrite at 0x1658fb8>#012Traceback (most recent call last):#012 File "/usr/share/vdsm/sampling.py", line 351, in collect#012 statsFunction()#012 File "/usr/share/vdsm/sampling.py", line 226, in __call__#012 retValue = self._function(*args, **kwargs)#012 File "/usr/share/vdsm/vm.py", line 525, in _highWrite#012 self._vm.extendDrivesIfNeeded()#012 File "/usr/share/vdsm/vm.py", line 2285, in extendDrivesIfNeeded#012 capacity, alloc, physical = self._dom.blockInfo(drive.path, 0)#012 File "/usr/share/vdsm/vm.py", line 838, in f#012 ret = attr(*args, **kwargs)#012 File "/usr/lib64/python2.6/site-packages/vdsm/libvirtconnection.py", line 76, in wrapper#012 ret = f(*args, **kwargs)#012 File "/usr/lib64/python2.6/site-packages/libvirt.py", line 1797, in blockInfo#012 if ret is None: raise libvirtError ('virDomainGetBlockInfo() failed', dom=self)#012libvirtError: invalid argument: invalid path /rhev/data-center/mnt/blockSD/88f22219-83b5-4597-93a9-f14a06818cea/images/de3d395d-be91-4df8-a696-af7eec684fc0/c3bf5b3c-a500-469a-bca0-a255ce53ee6a not assigned to domain Dec 30 12:54:20 ovirt01 vdsm vm.Vm ERROR vmId=`2a3fea67-68e6-4cf2-bb31-aa378f42eb88`::Stats function failed: <AdvancedStatsFunction _highWrite at 0x1658fb8>#012Traceback (most recent call last):#012 File "/usr/share/vdsm/sampling.py", line 351, in collect#012 statsFunction()#012 File "/usr/share/vdsm/sampling.py", line 226, in __call__#012 retValue = self._function(*args, **kwargs)#012 File "/usr/share/vdsm/vm.py", line 525, in _highWrite#012 self._vm.extendDrivesIfNeeded()#012 File "/usr/share/vdsm/vm.py", line 2285, in extendDrivesIfNeeded#012 capacity, alloc, physical = self._dom.blockInfo(drive.path, 0)#012 File "/usr/share/vdsm/vm.py", line 838, in f#012 ret = attr(*args, **kwargs)#012 File "/usr/lib64/python2.6/site-packages/vdsm/libvirtconnection.py", line 76, in wrapper#012 ret = f(*args, **kwargs)#012 File "/usr/lib64/python2.6/site-packages/libvirt.py", line 1797, in blockInfo#012 if ret is None: raise libvirtError ('virDomainGetBlockInfo() failed', dom=self)#012libvirtError: invalid argument: invalid path /rhev/data-center/mnt/blockSD/39b807ec-d486-42de-bfdc-8aead19c6a41/images/3e06341a-18ac-450f-b16a-22247fe7eaa9/f96bf3f7-9137-407f-9046-5dc2f9bc8412 not assigned to domain What does it mean and what can I do? It is a Centos 6.4 node with the following packages: vdsm-4.13.2-1.el6.x86_64 vdsm-python-cpopen-4.12.1-4.el6.x86_64 vdsm-python-4.13.2-1.el6.x86_64 vdsm-xmlrpc-4.13.2-1.el6.noarch vdsm-cli-4.13.2-1.el6.noarch libvirt-client-0.10.2-18.el6_4.14.x86_64 libvirt-0.10.2-18.el6_4.14.x86_64 libvirt-lock-sanlock-0.10.2-18.el6_4.14.x86_64 libvirt-python-0.10.2-18.el6_4.14.x86_64 gpxe-roms-qemu-0.9.7-6.9.el6.noarch qemu-kvm-rhev-0.12.1.2-2.355.el6.5.x86_64 qemu-kvm-rhev-tools-0.12.1.2-2.355.el6.5.x86_64 qemu-img-rhev-0.12.1.2-2.355.el6.5.x86_64 Do you need additional informations? Thanks, Michael

2 2

[Users] different data types on single node
by Neil Schulz 29 Dec '13

29 Dec '13

I am trying to test the performance of iSCSI and NFS on our system. However, I just discovered I have to have a new datacenter for each data type. Does this mean it's a single DC for each host? Is it possible to have a host use multiple data centers for different storage types? Than you, Neil

2 1

[Users] oVirt 3.3.2 release
by Sandro Bonazzola 26 Dec '13

26 Dec '13

The oVirt development team is very happy to announce the general availability of oVirt 3.3.2 as of December 19th 2013. This release solidifies oVirt as a leading KVM management application and open source alternative to VMware vSphere. oVirt is available now for Fedora 19 and Red Hat Enterprise Linux 6.5 (or similar). This release of oVirt includes 175 bug fixes and the first release of the Backup and Restore API, which enables backup programs to integrate with oVirt. This release also simplifies the Guide Me VM-creation wizard. See the release notes [1] for a list of the new features and bugs fixed. IMPORTANT NOTE: If you're upgrading from a previous version, please update ovirt-release to the latest version (10) and verify you have the correct repositories enabled by running the following commands # yum update ovirt-release # yum repolist enabled before upgrading with the usual procedure. You should see the ovirt-3.3.2 and ovirt-stable repositories listed in the output of the repolist command. [1] http://www.ovirt.org/OVirt_3.3.2_release_notes -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

4 8

[Users] Trying to upgrade from 3.3.1 to 3.3.2
by Maurice James 26 Dec '13

26 Dec '13

------=_NextPart_000_0010_01CF0222.59C39FD0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit I'm trying to upgrade from 3.3.1 to 3.3.2 and im getting the following output. It kind of speaks for itself but I'm not sure why its happening. --> Finished Dependency Resolution Error: Package: ovirt-engine-3.3.1-2.el6.noarch (@ovirt-stable) Requires: ovirt-engine-websocket-proxy = 3.3.1-2.el6 Removing: ovirt-engine-websocket-proxy-3.3.1-2.el6.noarch (@ovirt-stable) ovirt-engine-websocket-proxy = 3.3.1-2.el6 Updated By: ovirt-engine-websocket-proxy-3.3.2-1.el6.noarch (ovirt-3.3.2) ovirt-engine-websocket-proxy = 3.3.2-1.el6 Available: ovirt-engine-websocket-proxy-3.3.0-3.el6.noarch (ovirt-stable) ovirt-engine-websocket-proxy = 3.3.0-3.el6 Available: ovirt-engine-websocket-proxy-3.3.0-4.el6.noarch (ovirt-stable) ovirt-engine-websocket-proxy = 3.3.0-4.el6 Available: ovirt-engine-websocket-proxy-3.3.0.1-1.el6.noarch (ovirt-stable) ovirt-engine-websocket-proxy = 3.3.0.1-1.el6 Available: ovirt-engine-websocket-proxy-3.3.1-1.el6.noarch (ovirt-stable) ovirt-engine-websocket-proxy = 3.3.1-1.el6 You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles -nodigest Here is the output of repolist ]# yum repolist Loaded plugins: fastestmirror, rhnplugin, versionlock This system is receiving updates from RHN Classic or Red Hat Satellite. Loading mirror speeds from cached hostfile * base: linux.mirrors.es.net * centosplus: mirror.unl.edu * contrib: mirror.steadfast.net * epel: kdeforge2.unl.edu * extras: mirror-centos.hostingswift.com * rpmfusion-free-updates: mirrors.tummy.com repo id repo name status base CentOS-6 - Base 6,367 centos6-x86_64 CentOS 6 (x86_64) 0 centos6-x86_64-updates CentOS 6 Updates (x86_64) 296 centosplus CentOS-6 - Plus 16 contrib CentOS-6 - Contrib 0 epel Extra Packages for Enterprise Linux 6 - x86_64 10,171 extras CentOS-6 - Extras 14 glusterfs-epel GlusterFS is a clustered file-system capable of scaling to several petabytes. 11 glusterfs-noarch-epel GlusterFS is a clustered file-system capable of scaling to several petabytes. 1 ovirt-3.3.2 oVirt 3.3.2 release 111 ovirt-stable Older Stable builds of the oVirt project 324 rpmfusion-free-updates RPM Fusion for EL 6 - Free - Updates 273 spacewalk-client Spacewalk Client Tools 22 repolist: 17,606 ------=_NextPart_000_0010_01CF0222.59C39FD0 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" = xmlns:o=3D"urn:schemas-microsoft-com:office:office" = xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" = xmlns=3D"http://www.w3.org/TR/REC-html40"><head><meta = http-equiv=3DContent-Type content=3D"text/html; = charset=3Dus-ascii"><meta name=3DGenerator content=3D"Microsoft Word 15 = (filtered medium)"><style></style></head><body lang=3DEN-US = link=3D"#0563C1" vlink=3D"#954F72"><div class=3DWordSection1>I’m trying to upgrade from 3.3.1 to 3.3.2 and im = getting the following output. It kind of speaks for itself but I’m = not sure why its happening.<o:p></o:p><o:p> </o:p>--> = Finished Dependency Resolution<o:p></o:p>Error: = Package: ovirt-engine-3.3.1-2.el6.noarch = (@ovirt-stable)<o:p></o:p>         &= nbsp; Requires: ovirt-engine-websocket-proxy =3D = 3.3.1-2.el6<o:p></o:p>         &= nbsp; Removing: ovirt-engine-websocket-proxy-3.3.1-2.el6.noarch = (@ovirt-stable)<o:p></o:p>         &= nbsp;     ovirt-engine-websocket-proxy =3D = 3.3.1-2.el6<o:p></o:p>         &= nbsp; Updated By: ovirt-engine-websocket-proxy-3.3.2-1.el6.noarch = (ovirt-3.3.2)<o:p></o:p>         &= nbsp;     ovirt-engine-websocket-proxy =3D = 3.3.2-1.el6<o:p></o:p>         &= nbsp; Available: ovirt-engine-websocket-proxy-3.3.0-3.el6.noarch = (ovirt-stable)<o:p></o:p>         &= nbsp;     ovirt-engine-websocket-proxy =3D = 3.3.0-3.el6<o:p></o:p>         &= nbsp; Available: ovirt-engine-websocket-proxy-3.3.0-4.el6.noarch = (ovirt-stable)<o:p></o:p>         &= nbsp;     ovirt-engine-websocket-proxy =3D = 3.3.0-4.el6<o:p></o:p>         &= nbsp; Available: ovirt-engine-websocket-proxy-3.3.0.1-1.el6.noarch = (ovirt-stable)<o:p></o:p>         &= nbsp;     ovirt-engine-websocket-proxy =3D = 3.3.0.1-1.el6<o:p></o:p>         &= nbsp; Available: ovirt-engine-websocket-proxy-3.3.1-1.el6.noarch = (ovirt-stable)<o:p></o:p>         &= nbsp;     ovirt-engine-websocket-proxy =3D = 3.3.1-1.el6<o:p></o:p> You could try using = --skip-broken to work around the problem<o:p></o:p> You could try running: rpm -Va --nofiles = –nodigest<o:p></o:p><o:p> </o:p><o:p> </o:p>Here is the = output of repolist<o:p></o:p><o:p> </o:p><o:p> </o:p>]# yum = repolist<o:p></o:p>Loaded plugins: = fastestmirror, rhnplugin, versionlock<o:p></o:p>This system is receiving updates from RHN Classic or = Red Hat Satellite.<o:p></o:p>Loading mirror = speeds from cached hostfile<o:p></o:p> * base: = linux.mirrors.es.net<o:p></o:p> * centosplus: = mirror.unl.edu<o:p></o:p> * contrib: = mirror.steadfast.net<o:p></o:p> * epel: = kdeforge2.unl.edu<o:p></o:p> * extras: = mirror-centos.hostingswift.com<o:p></o:p> * = rpmfusion-free-updates: mirrors.tummy.com<o:p></o:p>repo = id           &nbsp= ;            =          repo = name           &nb= sp;           &nbs= p;           &nbsp= ;            =             &= nbsp;           &n= bsp;           &nb= sp; status<o:p></o:p>base        &nb= sp;           &nbs= p;           &nbsp= ;   CentOS-6 - = Base           &nb= sp;           &nbs= p;           &nbsp= ;            =             &= nbsp;           &n= bsp;        6,367<o:p></o:p>centos6-x86_64      &nbsp= ;            =        CentOS 6 = (x86_64)          &nbsp= ;            =             &= nbsp;           &n= bsp;           &nb= sp;           &nbs= p;           = 0<o:p></o:p>centos6-x86_64-updates     &nb= sp;            = CentOS 6 Updates = (x86_64)          &nbsp= ;            =             &= nbsp;           &n= bsp;           &nb= sp;           &nbs= p; 296<o:p></o:p>centosplus       &nb= sp;           &nbs= p;          CentOS-6 - = Plus           &nb= sp;           &nbs= p;           &nbsp= ;            =             &= nbsp;           &n= bsp;      =      16<o:p></o:p>contrib        =             &= nbsp;            = CentOS-6 - = Contrib           =             &= nbsp;           &n= bsp;           &nb= sp;           &nbs= p;           &nbsp= ;          = 0<o:p></o:p>epel        &nb= sp;           &nbs= p;           &nbsp= ;   Extra Packages for Enterprise Linux 6 - = x86_64           &= nbsp;        =             &= nbsp;           &n= bsp;    10,171<o:p></o:p>extras        &= nbsp;           &n= bsp;           &nb= sp; CentOS-6 - = Extras           &= nbsp;           &n= bsp;           &nb= sp;           &nbs= p;           &nbsp= ;            =           = 14<o:p></o:p>glusterfs-epel      &nbsp= ;            =        GlusterFS is a clustered = file-system capable of scaling to several = petabytes.          &nb= sp;           = 11<o:p></o:p>glusterfs-noarch-epel     &nbs= p;           &nbsp= ; GlusterFS is a clustered file-system capable of scaling to several = petabytes.          &nb= sp;            = 1<o:p></o:p>ovirt-3.3.2       &n= bsp;           &nb= sp;         oVirt 3.3.2 = release           =             &= nbsp;           &n= bsp;           &nb= sp;           &nbs= p;           &nbsp= ;       111<o:p></o:p>ovirt-stable       &= nbsp;           &n= bsp;        Older Stable builds of = the oVirt = project           =             &= nbsp;           &n= bsp;           &nb= sp;          = 324<o:p></o:p>rpmfusion-free-updates     &nb= sp;            = RPM Fusion for EL 6 - Free - = Updates           =             &= nbsp;           &n= bsp;           &nb= sp;           &nbs= p;  273<o:p></o:p>spacewalk-client      &nb= sp;           &nbs= p;     Spacewalk Client = Tools           &n= bsp;           &nb= sp;           &nbs= p;           &nbsp= ;            =             &= nbsp;    22<o:p></o:p>repolist: = 17,606<o:p></o:p><o:p> </o:p><o:p> </o:p></div></body></html> ------=_NextPart_000_0010_01CF0222.59C39FD0--

4 3

[Users] Engine as a VM
by Kevin Tibi 26 Dec '13

26 Dec '13

Hi all, i try to deploy engine as a VM. I use hosted-engine script. When my engine is up the script failed. I saw ssl error. So i disable SSL on my host (vdsm, libvirt, quemu) and on engine. But i have error when i switch host to active. Engine.log : 2013-12-26 14:09:22,641 INFO [org.ovirt.engine.core.bll.ActivateVdsCommand] (org.ovirt.thread.pool-6-thread-36) [3dcc628e] Activate finished. Lock released. Monitoring can run now for host hosted_engine_1 from data-center Default 2013-12-26 14:09:22,683 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (org.ovirt.thread.pool-6-thread-36) [3dcc628e] Correlation ID: 3eec943e, Job ID: f88b35fc-5c68-4653-85f5-268a6177c9ad, Call Stack: null, Custom Event ID: -1, Message: Host hosted_engine_1 was activated by admin@internal. 2013-12-26 14:09:22,732 INFO [org.ovirt.engine.core.bll.ActivateVdsCommand] (org.ovirt.thread.pool-6-thread-36) [3dcc628e] Lock freed to object EngineLock [exclusiveLocks= key: 8dd64eb3-b935-4cc2-8ce8-776f52dd88f3 value: VDS , sharedLocks= ] 2013-12-26 14:05:12,322 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetCapabilitiesVDSCommand] (DefaultQuartzScheduler_Worker-90) Command GetCapabilitiesVDSCommand(HostName = hosted_engine_1, HostId = 8dd64eb3-b935-4cc2-8ce8-776f52dd88f3, vds=Host[hosted_engine_1]) execution failed. Exception: VDSNetworkException: javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection? Have I forgotten something? Thx :) Kevin.

2 7

[Users] disable EnableMACAntiSpoofingFilterRules per VM
by Kapetanakis Giannis 26 Dec '13

26 Dec '13

Hi, Trying to move a VM with CARP/VRRP on oVirt 3.3.2 I got bitten by this. http://www.ovirt.org/Features/Design/Network/NetworkFiltering http://lists.ovirt.org/pipermail/users/2013-October/017217.html Is there a way to disable mac filtering only for a specific VM and not for the entire cluster? I've tried giving MAC addresses in the form of 00-00-5E-00-01-XX but it didn't work. Best regards, G

3 8

[Users] test
by Kiril Nesenko 26 Dec '13

26 Dec '13

1 0

[Users] [test email - sent at 12:30 IST]
by Eyal Edri 26 Dec '13

26 Dec '13

sorry for the noise, testing mailman. Eyal.

1 0

[Users] testing list - please ignore
by eyal edri 26 Dec '13

26 Dec '13

1 0

[Users] External test, please ignore.
by Doron Fe 26 Dec '13

26 Dec '13

1 0

[Users] test, please ignore
by Doron Fediuck 26 Dec '13

26 Dec '13

1 1

[Users] test
by Kiril Nesenko 26 Dec '13

26 Dec '13

- Kiril

1 0

[Users] test
by Kiril Nesenko 26 Dec '13

26 Dec '13

- Kiril

1 0

[Users] test
by Kiril Nesenko 26 Dec '13

26 Dec '13

- Kiril

1 0

[Users] ovirt-engine-sdk-java 1.0.0.6-1 released
by Michael Pasternak 25 Dec '13

25 Dec '13

- added new collection ClusterGlusterVolumeGlusterBrickStatistics - added new properties to the GlusterBrick - to vm added cpu.mode - to host install action added "image" parameter - ignore case in factory method lookup More details can be found at [1]. [1] http://www.ovirt.org/Java-sdk-changelog -- Michael Pasternak RedHat, ENG-Virtualization R&D

1 10

[Users] ovirt-sdk-python 3.3.0.1 released
by Michael Pasternak 25 Dec '13

25 Dec '13

- added new collection ClusterGlusterVolumeBrickStatistics - added NetUp 'cloned disk' importing capabilities - to ClusterGlusterVolumeBricks.list() added new argument "all_content" - to ClusterGlusterVolumeBricks.get() added new argument "all_content" - to host install method added new parameter "image" - to host add method added new parameter "display.address" - to vm add method added new parameter "vm.cpu.mode" - to vm add method added new overload for creating vm from snapshot - to cluster added tunnel_migration - to display added keyboard_layout - to display added smartcard_enabled - to DataCenter added Clusters sub-collection - to StorageDomain added Disks sub-collection - to Disks.list() added 'unregistered' argument - to Host added display.address - to Snapshot added commit/preview/undo actions - to vms.add() added overload for creating vm from snapshot - to hosts.add() added [@param host.display.address: string] - to vm.ticket() added [@param action.ticket.value: string] - return error if amount of fetched objects in X.get() is > 1 #890327 - session based authentication for /localhost is broken #916285 - explicitly ask for reply in xml - Add constructor parameter validate_cert_chain=True #915225 - defend against malformed server reply For more details see [1]. [1] http://wiki.ovirt.org/Python-sdk-changelog -- Michael Pasternak RedHat, ENG-Virtualization R&D

1 5

[Users] [ATTN] oVirt sync meetings in the next 2 weeks
by Doron Fediuck 24 Dec '13

24 Dec '13

Hi all, The next 2 oVirt sync meetings are planned for Christmas day and New year's day. Both public holiday in many countries. I'd like to cancel these instances so the next oVirt sync meeting will be on January 8, before oVirt 3.4 Beta. In the mean while we'll sync important issues over the relevant lists. Any objections?

2 2

[Users] A very merry christmas to all!
by Karli Sjöberg 24 Dec '13

24 Dec '13

--_000_5008F56C483F4B1AAE333184237B7B19sluse_ Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: base64 QmVzdCB3aXNoZXMgZnJvbToNCjYwLjAyOTcxNCwxNy41NTIzMzU6KQ0KDQpTa2lja2F0IGZyw6Vu IG1pbiBpUGhvbmUNCg== --_000_5008F56C483F4B1AAE333184237B7B19sluse_ Content-Type: text/html; charset="utf-8" Content-ID: <E192C9FA0048CA4F9C75382A06E4B4A4(a)ad.slu.se> Content-Transfer-Encoding: base64 PGh0bWw+DQo8aGVhZD4NCjxtZXRhIGh0dHAtZXF1aXY9IkNvbnRlbnQtVHlwZSIgY29udGVudD0i dGV4dC9odG1sOyBjaGFyc2V0PXV0Zi04Ij4NCjwvaGVhZD4NCjxib2R5IGRpcj0iYXV0byI+DQo8 ZGl2IHN0eWxlPSItd2Via2l0LXRleHQtc2l6ZS1hZGp1c3Q6IGF1dG87ICI+QmVzdCB3aXNoZXMg ZnJvbTo8L2Rpdj4NCjxkaXY+DQo8ZGl2IHN0eWxlPSJ0ZXh0LWFsaWduOiAtd2Via2l0LWF1dG87 ICI+PHNwYW4gc3R5bGU9InRleHQtYWxpZ246IGxlZnQ7IC13ZWJraXQtdGV4dC1zaXplLWFkanVz dDogYXV0bzsgYmFja2dyb3VuZC1jb2xvcjogcmdiYSgyNTUsIDI1NSwgMjU1LCAwKTsiPjYwLjAy OTcxNCwxNy41NTIzMzU6KTwvc3Bhbj48L2Rpdj4NCjxicj4NCjxzcGFuIHN0eWxlPSItd2Via2l0 LXRleHQtc2l6ZS1hZGp1c3Q6IGF1dG87Ij5Ta2lja2F0IGZyw6VuIG1pbiBpUGhvbmU8L3NwYW4+ PC9kaXY+DQo8L2JvZHk+DQo8L2h0bWw+DQo= --_000_5008F56C483F4B1AAE333184237B7B19sluse_--

2 1

Re: [Users] AcquireHostId problem
by Pascal Jakobi 23 Dec '13

23 Dec '13

Dec 20 23:43:59 lab2 kernel: [183033.639261] softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) Dec 20 23:44:11 lab2 systemd[1]: Starting Watchdog Multiplexing Daemon... Dec 20 23:44:11 lab2 wdmd[25072]: wdmd started S0 H1 G179 Dec 20 23:44:11 lab2 systemd-wdmd[25066]: Starting wdmd: [ OK ] Dec 20 23:44:11 lab2 wdmd[25072]: /dev/watchdog0 failed to set timeout Dec 20 23:44:11 lab2 wdmd[25072]: /dev/watchdog0 disarmed Dec 20 23:44:11 lab2 wdmd[25072]: /dev/watchdog1 armed with fire_timeout 60 Dec 20 23:44:11 lab2 systemd[1]: Started Watchdog Multiplexing Daemon. Dec 20 23:45:33 lab2 rpc.mountd[2819]: authenticated mount request from 192.168.1.41:994 for /home/vdsm/data (/home/vdsm/data) Dec 20 23:45:39 lab2 rpc.mountd[2819]: authenticated mount request from 192.168.1.41:954 for /home/vdsm/data (/home/vdsm/data) Seems to work a bit. However I still get "unable to attach storage" when creating a domain.... 2013/12/20 Federico Simoncelli <fsimonce(a)redhat.com> > ----- Original Message ----- > > From: "Pascal Jakobi" <pascal.jakobi(a)gmail.com> > > To: "Federico Simoncelli" <fsimonce(a)redhat.com> > > Sent: Friday, December 20, 2013 4:44:56 PM > > Subject: Re: [Users] AcquireHostId problem > > > > *Bug 1045512 created* < > https://bugzilla.redhat.com/show_bug.cgi?id=1045512> > > It looks perfect. Thanks. > > -- > Federico > -- *Pascal Jakobi* 116 rue de Stalingrad 93100 Montreuil, France *+33 6 87 47 58 19*Pascal.Jakobi(a)gmail.com

2 7