- Users - oVirt List Archives

[Users] Ipa server inside ovirt itself. ..
by Gianluca Cecchi 12 Apr '13

12 Apr '13

Hello, I have a test environment where I am short of hw. My engine is based on fedora 18 and I would like to test freeipa on centos 6. What are the drawbacks of creating a vm that is also one authentication domain for ovirt itself (apart the obvious ones)? Can i set it so that is the first to start? Can i set a subset of VMs to start only if this one is up and is giving ipa service (for example through a test connect command? ) Thanks Gianluca

2 1

Re: [Users] host goes to non-operational because interface down message
by Mark Wu 12 Apr '13

12 Apr '13

Gianluca, Thanks for your so detailed report. But unfortunately I can't find any clue related to this network interface status problem. Sorry for that. Maybe other guy can add more comments. At this moment, I suspect the link of em1.311 and probably its underlying interface em1 went down occasionally and came up in a short time. Is it possible? You could check the system log '/var/log/messages' to find related messages. > Thanks for your input Mark. > At the moment all is well again with the host; anyway I'm going to > give a long explanation of what I did below and so possible reasons > for that situation. > There is also feed for developers answers in that ... > > I cannot connect at the moment to the host to cut and paste in text > but I have access to java console and here is a screenshot containing > the line you requested (captured now that all is ok and host up and > runnign with two VMs): > > https://docs.google.com/file/d/0BwoPbcrMv8mvdmdIMUxTRVRVUzg/edit?usp=sharing > > Which fields are expected to be indicators of problems, as I had yesterday? You can check the 'state' filed in each interface. > > > The story: > > oVirt is 3.2.1 > - create a datacenter of type local_on_host > - create a cluster > - the ovirtmgmt is intended to be vlan tagged but I forget it... damn... > - I add a host (f18) where I prepared network configured with vlan > > ifcfg-em1 > ifcfg-em1.311 > > - the host deploy completes successfully --> here in my opinion a > possible bug because ovirtmgmt is not tagged? > - host reboots and apparently all is ok > - I can create local_on_host SD and ISO > - all is up and running without any VM yet > > The host is a blade inside an IMS enclosure and I discover that > actually I can configure the storage assigned (second disk of the > blade) as FC and that there is also multipath for this kind of servers > (see the other thread of mine). > > The optimal would be to deactivate all and redefine the DC as > Fibrechannel type but it seems not so easy.... > > I probably make an error at this point because instead of directly > putting host into maintenance I follow these steps in the gui: > - expand my DC at the left > - expand STORAGE of that DC on the left > - select my storage domain (LSTORAGE) on the left > > On the right pane I select the line of LSTORAGE and in the bottom > pane I select the "datacenter" label where I then select the line of > my DC. > I choose "maintenance" > > --> what is it supposed I have done this way? > Put storage domain in maintenance or DC or what? > > Is it supposed to be a correct operation what I've done if the DC is > Up and this is the only SD I have? > Or would it be correct to receive an error from the system? > > Because I don't receive any error and I see the SD down and host that > keeps staying with the status "Preparing to maintenance" > > I don't remember correctly my steps here, possibly restart of host > that is recognized then as unassigned. > After that I cannot "force remove" the DC and I cannot remove the > cluster or host because it is not in maintenance. > > After I also reboot the engine service and restart the host, it comes > up normally with all the DC with the old config. > At this point I can put host in maintenance and force remove the DC > I create a new DC with same name but with type FC and ovirtmgmt as > vlan tagged and I see that the existing cluster is still present, so I > attach it to the new DC (that has the same name as before). > I also find that there is my host that seems to automatically be in > this cluster. > > But at this point when I activate it, it comes up but after a few > minutes I get the message I posted at the beginning > In host details, its network interfaces keep down. > Tried different restarts of host. > So I decide to put host into maintenance and select into the gui to > "reinstall" it. > After this all goes well again.. > > Sorry for the long story > > Gianluca > > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users >

1 0

[Users] fedora 18 kernel problems (was Re: oVirt 3.2 and MD3600i)
by Gianluca Cecchi 11 Apr '13

11 Apr '13

On Tue, Apr 9, 2013 at 9:10 PM, Joop wrote: > > For the first part I don't have an answer but the softlockups sound familiar > and the only solution I have found sofar that works reliable is to switch > back to kernel 3.6.10 > I higher kernel level will sometimes work after a reboot but more often it > will cause softlockups as soon as multipathd is started. Hello, is there any bugzilla tracked for this? At my part I openend https://bugzilla.redhat.com/show_bug.cgi?id=947255 because with some servers I have also the problem that I'm put into a dracut shell with kernel higher than stock f18 initial one. Are there other ones? Anyone already tried latest kernels such as 3.8.5-201.fc18.x86_64? What is the kernel shipped with ovirt-node iso? Can we use it eventually on a standard fedora 18 system? BTW: with my home pc where I have model name : AMD Athlon(tm) II X4 630 Processor and an all-in-one 3.2.1 installation over fedora 18, I have no problems with 3.8.5-201.fc18.x86_64 kernel. Thanks, Gianluca

1 0

[Users] ovirt and web portals favicon
by Gianluca Cecchi 11 Apr '13

11 Apr '13

Hello, not a big deal, but could ovirt have its own logo and so map it to the favicon on portals? At the moment I see the well known Red Hat logo.... fedora has its own even if sponsored by Red Hat as I imagine oVirt is... Just for knowledge, not debate... PS: at the moment it seems the ovirt.org has no favicon, so it could be the occasion to make both... Thanks, Gianluca

4 4

[Users] VM crashes and doesn't recover
by Limor Gavish 10 Apr '13

10 Apr '13

Hello, I am using Ovirt 3.2 on Fedora 18: [wil@bufferoverflow ~]$ rpm -q vdsm vdsm-4.10.3-7.fc18.x86_64 (the engine is built from sources). I seem to have hit this bug: https://bugzilla.redhat.com/show_bug.cgi?id=922515 in the following configuration: Single host (no migrations) Created a VM, installed an OS inside (Fedora18) stopped the VM. created template from it. Created an additional VM from the template using thin provision. Started the second VM. in addition to the errors in the logs the storage domains (both data and ISO) crashed, i.e went to "unknown" and "inactive" states respectively. (see the attached engine.log) I attached the VDSM and engine logs. is there a way to work around this problem? It happens repeatedly. Yuval Meir

7 13

[Users] Spice usb pass-through
by Ryan Wilkinson 10 Apr '13

10 Apr '13

When using a Fedora with Firefox client to access an Ovirt vm, any ideas on how to avoid having to enter root password for the Fedora client when utilizing a local usb device via pass-through?

2 1

[Users] VDI using oVirt
by John Baldwin 10 Apr '13

10 Apr '13

Any good guides on setting up VDI using oVirt??? John Baldwin Sr. UnIx System Admin, Clearwater, FL

2 1

[Users] 3.2 final and status of spice console in ie
by Gianluca Cecchi 09 Apr '13

09 Apr '13

Hello, what is the status of support for spice console with ie9 (32bit on win7 32bit in my case) and 3.2 final? I have a windows xp vm but when I try to login to console from win7+ie9 I don't get any activex request to install.... ie exact version: https://docs.google.com/file/d/0BwoPbcrMv8mvVHZhYnczY3lKaTA/edit?usp=sharing If after a few minutes I click again on console button I get Error: A Request to the Server failed with the following Status Code: 400 Tried with both admin and user portal. Thanks, Gianluca

10 35

[Users] Ims shared disks and ovirt storage
by Gianluca Cecchi 09 Apr '13

09 Apr '13

Hello, I have the chance to work on Intel blades where I have option to confihure shared disks between them at enclosure level. Their controller is scsi. How could I configure as shared storage in ovirt? I presume neither Fc nor iscsi are possible. .. so what can i do in your opinion? Thanks in advance Gianluca

2 3

[Users] DNS for IPA in oVirt
by René Koch (ovido) 09 Apr '13

09 Apr '13

Hi list, I don't want to ask my question in the mail thread of Eduardo to avoid mixing topics. Can you give me more detailed information on how oVirt is using DNS internally and how IPA users can work in the following scenario: # engine-manage-domains -action=list Domain: ovido.at User name: admin(a)OVIDO.AT Manage Domains completed successfully # cat /etc/hosts | grep engine 10.0.100.195 ovirt-engine.lab.ovido.at # ip a 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:1a:4a:00:64:14 brd ff:ff:ff:ff:ff:ff inet 10.0.100.195/24 brd 10.0.100.255 scope global eth0 # host ovirt-engine.lab.ovido.at ovirt-engine.lab.ovido.at has address 10.0.100.24 # host 10.0.100.24 24.100.0.10.in-addr.arpa domain name pointer ovirt-engine.lab.ovido.at. So in my case I have correct DNS settings (forward and reverse), but my ovirt-engine host has a totally different IP address. I didn't test SSO with Kerberos in user portal (maybe this want work), but authentication with IPA user in user portal and admin portal is working fine even with these totally wrong DNS configuration. Regards, René

2 3

[Users] oVirt Presentations
by René Koch (ovido) 09 Apr '13

09 Apr '13

Hello list, I just want to inform you that I'll be talking about RHEV and oVirt on 2 (maybe 3) events in Austria and Germany in the next weeks (45min presentation slots). The first one is at the Open Source Data Center Conference in Nuremberg, Germany which takes place from April, 17th to April, 18th: http://www.netways.de/en/osdc/osdc2013/ Details on my presentation (presentation language is German): http://www.netways.de/index.php?id=3732&L=1 Main focus will be Red Hat Enterprise Virtualization, but will also talk about oVirt. The second event is at the Graz Linux Days in Austria on April, 20th: http://www.linuxtage.at/ (Sorry, there's no English version available) Details on my presentation (in German): http://glt13-programm.linuxtage.at/events/174.de.html As this event is a non-profit community event I'll be focusing on oVirt, but will also talk about differences to RHEV. Eventually I'll be talking about oVirt on the Linux Weeks in Vienna, Austria, too. This event is from May, 2nd to May, 4th: http://www.linuxwochen.at/ At the moment the call for papers is still running... If there's someone from Germany or Austria on this list and attends on one of these events please let me know :) Regards, René

1 0

[Users] api question / create vm from template
by Alex Leonhardt 09 Apr '13

09 Apr '13

hi, i've been successful in creating a VM from a template, however, that VM is a thin-provisioned one ? is it possible to make it a cloned / pre-provisioned ? otherwise i wont be able to update/remove the template when i need to ? this is on ovirt 3.1 thanks alex -- | RHCE | Sen Sys Engineer / Platform Architect | www.vcore.co | www.vsearchcloud.com |

3 4

[Users] SPM is always contending
by Andy Singleton 08 Apr '13

08 Apr '13

After the node acting as spm was (accidentally) put into maintenance mode, the spm role is always contending. The original node doesnt take the role back either. About 10 instances were still running on the node when it was put into maintenance. I have ovirt 3.1.0-4 with a targetcli iscsi store. Here are the contents of the engine.log. Andy 2013-04-04 15:25:23,979 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.SpmStartVDSCommand] (QuartzScheduler_Worker-96) [5449512a] spmStart polling ended. spm status: Free 2013-04-04 15:25:23,993 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMClearTaskVDSCommand] (QuartzScheduler_Worker-96) [5449512a] START, HSMClearTaskVDSCommand(vd sId = d265245e-3cc5-11e2-bce7-001018fc3b14, taskId=7c1cf7c6-21d4-4504-882d-3d465742b6ef), log id: d2da8ba 2013-04-04 15:25:24,011 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMClearTaskVDSCommand] (QuartzScheduler_Worker-96) [5449512a] FINISH, HSMClearTaskVDSCommand, log id: d2da8ba 2013-04-04 15:25:24,012 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.SpmStartVDSCommand] (QuartzScheduler_Worker-96) [5449512a] FINISH, SpmStartVDSCommand, return: org.ovirt.engine.core.common.businessentities.SpmStatusResult@30a05218, log id: 5980d6f4 2013-04-04 15:25:24,014 INFO [org.ovirt.engine.core.bll.storage.SetStoragePoolStatusCommand] (QuartzScheduler_Worker-96) [6d6dbe98] Running command: SetStoragePoolStat usCommand internal: true. Entities affected : ID: 0ba15357-9b3b-4a76-8dac-b2b66b922174 Type: StoragePool 2013-04-04 15:25:24,843 ERROR [org.ovirt.engine.core.vdsbroker.irsbroker.IrsBrokerCommand] (QuartzScheduler_Worker-96) [6d6dbe98] IrsBroker::Failed::GetStoragePoolInfoV DS due to: IrsSpmStartFailedException: IRSGenericException: IRSErrorException: SpmStart failed 2013-04-04 15:25:24,900 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.IrsBrokerCommand] (QuartzScheduler_Worker-96) [6d6dbe98] Irs placed on server null failed. Proc eed Failover 2013-04-04 15:25:34,977 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.IrsBrokerCommand] (QuartzScheduler_Worker-96) [6d6dbe98] hostFromVds::selectedVds - moon-palace , spmStatus Free, storage pool Primary 2013-04-04 15:25:35,806 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.IrsBrokerCommand] (QuartzScheduler_Worker-96) [6d6dbe98] starting spm on vds moon-palace, stora ge pool Primary, prevId -1, LVER 2520 2013-04-04 15:25:35,851 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.SpmStartVDSCommand] (QuartzScheduler_Worker-96) [6d6dbe98] START, SpmStartVDSCommand(vdsId = 3d 88c8b0-84bc-11e2-96b1-001018fc3b14, storagePoolId = 0ba15357-9b3b-4a76-8dac-b2b66b922174, prevId=-1, prevLVER=2520, storagePoolFormatType=V2, recoveryMode=Manual, SCSIF encing=false), log id: 30f4f64e 2013-04-04 15:25:45,901 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.SpmStartVDSCommand] (QuartzScheduler_Worker-96) [6d6dbe98] spmStart polling started: taskId = 6 8002cff-478d-4c2c-8839-b935d8a858b1 2013-04-04 15:26:11,903 INFO [org.ovirt.engine.core.bll.VdsLoadBalancer] (QuartzScheduler_Worker-81) [45db3aaa] VdsLoadBalancer: Starting load balance for cluster: BP_ Primary, algorithm: EvenlyDistribute. 2013-04-04 15:26:12,807 INFO [org.ovirt.engine.core.bll.VdsLoadBalancer] (QuartzScheduler_Worker-81) [45db3aaa] VdsLoadBalancer: high util: 51, low util: 0, duration: 2, threashold: 80 2013-04-04 15:26:12,845 INFO [org.ovirt.engine.core.bll.VdsLoadBalancingAlgorithm] (QuartzScheduler_Worker-81) [45db3aaa] VdsLoadBalancer: number of relevant vdss (no migration, no pending): 3. 2013-04-04 15:26:12,846 INFO [org.ovirt.engine.core.bll.VdsCpuVdsLoadBalancingAlgorithm] (QuartzScheduler_Worker-81) [45db3aaa] VdsLoadBalancer: number of over utilize d vdss found: 0. 2013-04-04 15:26:12,846 INFO [org.ovirt.engine.core.bll.VdsCpuVdsLoadBalancingAlgorithm] (QuartzScheduler_Worker-81) [45db3aaa] VdsLoadBalancer: max cpu limit: 40, num ber of ready to migration vdss: 3 2013-04-04 15:26:19,024 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.SpmStartVDSCommand] (QuartzScheduler_Worker-96) [6d6dbe98] spmStart polling ended: taskId = 680 02cff-478d-4c2c-8839-b935d8a858b1 task status = finished 2013-04-04 15:26:19,024 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.SpmStartVDSCommand] (QuartzScheduler_Worker-96) [6d6dbe98] Start SPM Task failed - result: clea nSuccess, message: VDSGenericException: VDSErrorException: Failed in vdscommand to HSMGetTaskStatusVDS, error = BlockSD master file system FSCK error This log sequence repeats indefinitely

2 1

[Users] Trouble in ovirt during install new host.
by Kasen 08 Apr '13

08 Apr '13

Hi! I update ovirt from 3.1 to 3.2 and now i have trouble. When I want install new host in ovirt, its install failed. In log i see next: 2013-04-08 11:09:55 DEBUG otopi.context context._executeMethod:127 method exception Traceback (most recent call last): File "/tmp/ovirt-JvvRifwHtC/pythonlib/otopi/context.py", line 117, in _executeMethod method['method']() File "/tmp/ovirt-JvvRifwHtC/otopi-plugins/ovirt-host-deploy/vdsm/bridge.py", line 671, in _validation addresses=addresses, RuntimeError: Cannot connect engine host 'localhost.localdomain' at any of the addresses ['127.0.0.1', '127.0.0.1', '127.0.0.1', '::1', '::1', '::1']' 2013-04-08 11:09:55 ERROR otopi.context context._executeMethod:136 Failed to execute stage 'Setup validation': Cannot connect engine host 'localhost.localdomain' at any of the addresses ['127.0.0.1', '127.0.0.1', '127.0.0.1', '::1', '::1', '::1']' and 2013-04-08 11:09:55 DEBUG otopi.plugins.otopi.dialog.machine dialog.__logString:213 DIALOG:SEND ***Q:VALUE VDSM/engineHost 2013-04-08 11:09:55 DEBUG otopi.plugins.otopi.dialog.machine dialog.__logString:213 DIALOG:SEND ### 2013-04-08 11:09:55 DEBUG otopi.plugins.otopi.dialog.machine dialog.__logString:213 DIALOG:SEND ### Please specify value for 'VDSM/engineHost': 2013-04-08 11:09:55 DEBUG otopi.plugins.otopi.dialog.machine dialog.__logString:213 DIALOG:SEND ### Response is VALUE VDSM/engineHost=type:value or ABORT VDSM/engineHost 2013-04-08 11:09:55 DEBUG otopi.plugins.otopi.dialog.machine dialog.__logString:213 DIALOG:RECEIVE VALUE VDSM/engineHost=str:localhost.localdomain How and where i must specified VDSM/engineHost? Best regards, Kasen.

2 2

Re: [Users] SPM is always contending - resolved
by Andy Singleton 08 Apr '13

08 Apr '13

Problem resolved. The clue was obviously in the engine.log (FSCK error) but I couldn't see what was needing an fsck or why this would prevent the storage of every vm from being mounted. I still dont understand the whole of the ovirt storage mechanism. More information was in the node vdsm.log - It pointed here. /dev/mapper/9ed5a2fe--ae4c--433f--a15f--2c710ed5156f-master One fsck later problem resolved. Thanks Andy

2 2

[Users] Fwd: cannot assign network without IP address
by Alona Kaplan 07 Apr '13

07 Apr '13

It seems like an old bug. Since oVirt3.1 a lot of bugs were fixed in the edit nic dialog. Maybe consider using ovirt3.2? Alona. ----- Original Message ----- > From: "Vincent Van der Kussen" <vincent(a)vanderkussen.org> > To: users(a)ovirt.org > Sent: Wednesday, April 3, 2013 9:38:23 AM > Subject: [Users] cannot assign network without IP address > > Hi, > > I'm using oVirt 3.1 on CentOS 6.3 and have the following issue > > If I add a logical network to the datacenter i cannot assign it to a host > without giving it an IP address. > > I just want to use the logical network as a bridge without specifying an IP > address (None option in the network settings). > > This is the error message : > > Error while executing action Setup Networks: Illegal or Incomplete IP > Address > > > In the log on the engine i see the following error : > > VDSGenericException: VDSNetworkException: Specified netmask or gateway but > not ip > > To me this is complete bogus since none of my nics have any ip settings > defined. > Only the ovirtmgmt network has this which is copied from the initial network > setup > during the ovirt-engine install > > I also found this post which discusses the same problem : > > http://www.mail-archive.com/users@ovirt.org/msg06261.html > > When adding the logical network to the datacenter I can also not unset the > "VM Network" option. > > In our RHEV setup we can do this perfectly. > > > Regards, > Vincent > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users >

2 1

[Users] deploying ovirt-engine from src
by lof yer 07 Apr '13

07 Apr '13

After following the steps in http://www.ovirt.org/Building_oVirt_engine, I met some problems in deploying it. Here's the status while I visit http://localhost:8700/webadmin/webadmin/WebAdmin.html HTTP Status 500 - ------------------------------ *type* Exception report *message* *description* *The server encountered an internal error () that prevented it from fulfilling this request.* *exception* javax.servlet.ServletException: Servlet execution threw an exception org.ovirt.engine.ui.frontend.server.gwt.GwtCachingFilter.doFilter(GwtCachingFilter.java:132) *root cause* java.lang.NoClassDefFoundError: Could not initialize class org.ovirt.engine.ui.frontend.server.gwt.plugin.PluginDataManager$Holder org.ovirt.engine.ui.frontend.server.gwt.plugin.PluginDataManager.getInstance(PluginDataManager.java:74) org.ovirt.engine.ui.frontend.server.gwt.WebAdminHostPageServlet.getPluginData(WebAdminHostPageServlet.java:85) org.ovirt.engine.ui.frontend.server.gwt.WebAdminHostPageServlet.doGet(WebAdminHostPageServlet.java:53) javax.servlet.http.HttpServlet.service(HttpServlet.java:734) javax.servlet.http.HttpServlet.service(HttpServlet.java:847) org.ovirt.engine.ui.frontend.server.gwt.GwtCachingFilter.doFilter(GwtCachingFilter.java:132) *note* *The full stack trace of the root cause is available in the JBoss Web/7.0.13.Final logs.* ------------------------------ JBoss Web/7.0.13.Final What does it mean? And What should I do next? Thanks!!

2 1

[Users] Query regarding storagedomins
by Romil Gupta 07 Apr '13

07 Apr '13

Hi , *I want to fetch the storagedomains details based on the datacenter id using ovirt-engine-sdk-3.2.0.2-1.* Datacenter details: <data_centers> <data_center id="e1165cdf-2c42-48a9-87ca-5c3f5cfa8fb3" href="/api/datacenters/e1165cdf-2c42-48a9-87ca-5c3f5cfa8fb3"> <name>datacenter1</name> <description/> <link rel="storagedomains" href="/api/datacenters/e1165cdf-2c42-48a9-87ca-5c3f5cfa8fb3/storagedomains"/> <link rel="permissions" href="/api/datacenters/e1165cdf-2c42-48a9-87ca-5c3f5cfa8fb3/permissions"/> </data_center> <data_center id="347748d0-b72b-439f-bb2b-bd5c82041158" href="/api/datacenters/347748d0-b72b-439f-bb2b-bd5c82041158"> <name>Default</name> <description/> <link rel="storagedomains" href="/api/datacenters/347748d0-b72b-439f-bb2b-bd5c82041158/storagedomains"/> <link rel="permissions" href="/api/datacenters/347748d0-b72b-439f-bb2b-bd5c82041158/permissions"/> </data_center> </data_centers> I want to know how I could get the storagedomains details using the above xml ? *_session = API(url=rhevm_uri, username=rhevm_username, password=rhevm_password, insecure=True) * *print "Connected to RHEVM Successful"* *datacenters = _session.datacenters.list()* *for dc in datacenters:* * print dc.name* * print dc.id* * links = dc.link* * for l in links:* * print l.rel* * print l.href* *but this wont give any storagedomain details :(* I tried this : storages = _session.storagedomains.list() for storage in storages: print storage.name <storage_domains> <storage_domain id="e3e3b0cd-48a4-4bb8-a75b-07813f2c165e" href="/api/storagedomains/e3e3b0cd-48a4-4bb8-a75b-07813f2c165e"> <name>rhevmiso</name> <link rel="permissions" href="/api/storagedomains/e3e3b0cd-48a4-4bb8-a75b-07813f2c165e/permissions"/> <link rel="files" href="/api/storagedomains/e3e3b0cd-48a4-4bb8-a75b-07813f2c165e/files"/> <type>iso</type> <master>false</master> <storage> <type>nfs</type> <address>*.*.*.*</address> <path>/iso/rhevmisonfs</path> </storage> <available>767725404160</available> <used>94489280512</used> <committed>0</committed> <storage_format>v1</storage_format> </storage_domain> <storage_domain id="baa46f57-13e0-4159-ace1-f04e61e1e937" href="/api/storagedomains/baa46f57-13e0-4159-ace1-f04e61e1e937"> <name>rhevmVMdata</name> <link rel="permissions" href="/api/storagedomains/baa46f57-13e0-4159-ace1-f04e61e1e937/permissions"/> <link rel="files" href="/api/storagedomains/baa46f57-13e0-4159-ace1-f04e61e1e937/files"/> <type>data</type> <master>true</master> <storage> <type>nfs</type> <address>*.*.*.*</address> <path>/iso/rhevmnfs</path> </storage> <available>767725404160</available> <used>94489280512</used> <committed>100931731456</committed> <storage_format>v1</storage_format> </storage_domain> </storage_domains> but it wont contains datacenter ID :( help me out ! -- *Thanks & Regards,* *Romil Gupta *

3 4

[Users] Custom columns in VM list (engine admin) ?
by Ernest Beinrohr 05 Apr '13

05 Apr '13

This is a multi-part message in MIME format. --------------080005070104070301000505 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Hi, is it possible to add columns to the VM list view in ovirt-engine administrator? I'd like to add a memory columns (max, current) and also some IO stats and. In RHEL 5 virt-manager show something like this: http://i.imgur.com/e18DJtf.png -- Ernest Beinrohr, AXON PRO Ing <http://www.beinrohr.sk/ing.php>, RHCE <http://www.beinrohr.sk/rhce.php>, RHCVA <http://www.beinrohr.sk/rhce.php>, LPIC <http://www.beinrohr.sk/lpic.php>, +421-2--6241-0360 <callto://+421-2--6241-0360>, +421-903--482-603 <callto://+421-903--482-603> icq:28153343, skype:oernii-work <callto://oernii-work>, jabber:oernii@jabber.org ------------------------------------------------------------------------ “The bureaucracy is expanding to meet the needs of the expanding bureaucracy.” ― Oscar Wilde --------------080005070104070301000505 Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: 8bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=UTF-8"> </head> <body bgcolor="#FFFFFF" text="#000000"> Hi, is it possible to add columns to the VM list view in <br> ovirt-engine administrator? I'd like to add a memory <br> columns (max, current) and also some IO stats and.<br> <br> <br> In RHEL 5 virt-manager show something like this:<br> <a class="moz-txt-link-freetext" href="http://i.imgur.com/e18DJtf.png">http://i.imgur.com/e18DJtf.png</a><br> <br> <div class="moz-signature">-- <br> <div id="oernii_footer" style="color: gray;"> <span style="font-family: Lucida Console, Luxi Mono, Courier, monospace; font-size: 90%;"> Ernest Beinrohr, AXON PRO<br> <a style="text-decoration: none; color: gray;" href="http://www.beinrohr.sk/ing.php">Ing</a>, <a style="text-decoration: none; color: gray;" href="http://www.beinrohr.sk/rhce.php">RHCE</a>, <a style="text-decoration: none; color: gray;" href="http://www.beinrohr.sk/rhce.php">RHCVA</a>, <a style="text-decoration: none; color: gray;" href="http://www.beinrohr.sk/lpic.php">LPIC</a>, <a style="text-decoration: none; color: gray;" href="callto://+421-2--6241-0360">+421-2--6241-0360</a>, <a style="text-decoration: none; color: gray;" href="callto://+421-903--482-603">+421-903--482-603</a><br> icq:28153343, <a style="text-decoration: none; color: gray;" href="callto://oernii-work">skype:oernii-work</a>, <a class="moz-txt-link-abbreviated" href="mailto:jabber:oernii@jabber.org">jabber:oernii@jabber.org</a> <br> </span> <hr style="height: 1px; width: 95%"> “The bureaucracy is expanding to meet the needs of the expanding bureaucracy.” ― Oscar Wilde </div> </div> </body> </html> --------------080005070104070301000505--

3 2

[Users] Fast way to see all snapshots on my infra?
by Gianluca Cecchi 05 Apr '13

05 Apr '13

Hello, is there any way to see a recap of all the snapshots in my DCs and Clusters? Both from webadmin gui or REST API or query on engine db? Thanks, Gianluca

2 3

[Users] User Portal
by suporte＠logicworks.pt 05 Apr '13

05 Apr '13

------=_Part_92_13710243.1363783104563 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit How can I add users to the user portal? Thanks -- Jose Ferradeira http://www.logicworks.pt ------=_Part_92_13710243.1363783104563 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: 7bit <html><head><style type='text/css'>p { margin: 0; }</style></head><body><div style='font-family: verdana,helvetica,sans-serif; font-size: 10pt; color: #330066'>How can I add users to the user portal?<br><br>Thanks<br><br>-- <br><div><span name="x"></span><hr style="width: 100%; height: 2px;">Jose Ferradeira<br>http://www.logicworks.pt<br><span name="x"></span><br></div></div></body></html> ------=_Part_92_13710243.1363783104563--

7 19

[Users] Feature request: allow usbtablet and vram config via UI
by Dead Horse 05 Apr '13

05 Apr '13

Allow for a usbtablet input device to be enabled and used. Perhaps via the console configuration UI for a VM in the admin and user portals. -Highly useful in the event that a guest OS does not have the spice agent loaded nor is it available for said guest OS. -Also in the case of guest OS that simply does not want to work and play well with <input type='mouse' bus='ps2'> - All Operating systems since ~1998 understand <input type='tablet' bus='usb'/> and will deal with mouse events in absolute mode. Allow for vram and vram_ size to be configurable for CIrrus(VNC) and QXL(Spice) console types. Again probably best suited to have this on console configuration UI for a VM in the admin and user portals. - Default VRAM sizes are not enough to allow for larger resolutions and pixel depths at times. - Especially the case in multiple monitor SPICE, fullscreen, or VNC consoles - More VRAM is useful in the case of attempting to run accelerated applications within a QXL configured guest. The above can be altered via VDSM hooks however this is rather painful. Additionally these options or similar are configurable in other competing solutions. - DHC

2 4

[Users] error 400
by Ryan Wilkinson 05 Apr '13

05 Apr '13

Keep getting the following error from IE when logged into the Ovirt admin console: Error: A Request to the Server failed with the following Status Code: 400 I'm getting it from an all-in-one setup and also from a seperate Engine/ host configuration.

2 1

[Users] Fedora 18 and jboss-as update
by Gianluca Cecchi 04 Apr '13

04 Apr '13

Hello, having all-in-one 3.2.1 based on f18 I'm now proposed an update of jboss to version 7.1.1-17.fc18 Some time ago I remember someone writing about problems with jboss updates but I don't remember if with nightly or in general... Currently I have jboss-as-7.1.1-13.fc18.noarch Can I safely update it? The same for not all-in-one installations? anyone already updated ? Thanks in advance, Gianluca

1 0

[Users] way to edit iSCSI storage domain?
by Yuriy Demchenko 04 Apr '13

04 Apr '13

Hi, is there any way to edit iSCSI storage domain: change/add targets ? (lun, id, sn and actual content wouldn't be affected) Without VM export/import process - downtime should be as little as possible. I'm researching possibility to use oVirt in env where I have only FC storage, connected to 2 servers (and sadly, second server will be available later, hence my question about changing targets in oVirt) and bunch of blades, on which i would like to run virtualization (no fc storage connectivity) - so idea is to share storage via iSCSI/tgtd and use multipathd with failover mode to protect from storage corruption. -- Yuriy Demchenko

3 8