- Users - oVirt List Archives

[Users] Default compatibility version in ovirt nightly
by Gianluca Cecchi 07 Jan '13

07 Jan '13

Hello, I remember some time ago someone writing about compatibility version defaults for 3.2 that should be put to 3.2. I'm using oVirt nightly in all-in-one config as of ovirt-engine-3.2.0-1.20130101.git2184580.fc18.noarch but compatibility versions defaults are still 3.1 both for local_datacenter and local_cluster and Default Datacenter and Cluster Gianluca

3 5

[Users] Action Needed: Upcoming Deadlines for oVirt Workshop at NetApp
by Leslie Hawthorn 07 Jan '13

07 Jan '13

Hello everyone, ***If you will not be attending the oVirt workshop taking place at NetApp HQ on 22-24 January 2013 [0], you can stop reading now.*** Hotel Room Block Expiring: If you require a hotel room as part of your visit for the workshop, please book your room ASAP [1], as we will be releasing extra rooms in our block at close of business tomorrow, 8 January. If you are unable to book a room by close of business tomorrow, all unbooked rooms in our block will be released. You may still request our room block rate but you will no longer be guaranteed lodging at the Country Inn and Suites as of Wednesday, 9 January. Registration Deadline: In order to have an accurate headcount for catering, please ensure you have completed your registration for the event no later than close of business on Tuesday, 15 January. [1] Please take a moment to register and to remind any friends and colleagues who would be interested in attending of our registration deadline. If you or a colleague are unable to register by Tuesday, 15 January, but would still like to attend please contact Dave Neary off-list. [2] Dave will do his best to ensure that we are able to process late registrations, though we unfortunately cannot make any guarantees. Thank you once again to Patrick Rogers, Denise Ridolfo, Jon Benedict, Talia Reyes-Ortiz and the rest of the fine folks at NetApp for hosting this workshop and all their hard work to bring the community together in Sunnyvale. If you have any questions, please let me know. I look forward to (re)meeting you at the oVirt workshop at NetApp. [0] - http://www.ovirt.org/NetApp_Workshop_January_2013 [1] - http://ovirtnetapp2013.eventbrite.com/# [2] - dneary at redhat dot com Cheers, LH -- Leslie Hawthorn Community Action and Impact Open Source and Standards @ Red Hat identi.ca/lh twitter.com/lhawthorn]

1 0

Re: [Users] What do you want to see in oVirt next?
by Charlie 07 Jan '13

07 Jan '13

On Thu, Jan 3, 2013 at 11:08 AM, Itamar Heim <iheim(a)redhat.com> wrote: > Hi Everyone, > > as we wrap oVirt 3.2, I wanted to check with oVirt users on what they find > good/useful in oVirt, and what they would like to see improved/added in > coming versions? > > Thanks, > Itamar Good/useful: Open Source virtualization with a strong web management interface. Rapidly improving, too. wish improved: SPICE connection reliability and LDAPS support. wish added: native ATA-over-Ethernet SAN support. wish removed: Kerberos dependencies. Let people who want Kerb have it, but don't force it where it's not needed. LDAP over SSL is secure. Many thanks to all the oVirt team for all their hard work! --Charlie

2 1

[Users] adding iso images
by Carl T. Miller 07 Jan '13

07 Jan '13

Is there a way to add an iso image to an nfs share by simply copying a file? Or is there a command to run from one of the hosts? The only method I know is using engine-iso-uploader and it's not working in my environment. c

5 5

[Users] unable to install ovirt nightly all in one due to java dependency
by Gianluca Cecchi 06 Jan '13

06 Jan '13

Helo, on a freshly installed F18 I get this $ sudo yum install ovirt-engine-setup-plugin-allinone ... --> Processing Dependency: java-1.7.0-openjdk >= 1:1.7.0.9-2.3.3.2 for package: ovirt-engine-3.2.0-1.20130104.git2ad721c.fc18.noarch ---> Package plexus-cli.noarch 0:1.2-12.fc18 will be installed --> Finished Dependency Resolution Error: Package: ovirt-engine-3.2.0-1.20130104.git2ad721c.fc18.noarch (ovirt-nightly) Requires: java-1.7.0-openjdk >= 1:1.7.0.9-2.3.3.2 Installed: 1:java-1.7.0-openjdk-1.7.0.9-2.3.3.fc18.1.x86_64 (@fedora) java-1.7.0-openjdk = 1:1.7.0.9-2.3.3.fc18.1 My java 1.7.0.9-2.3.3.fc18.1 is requested by libreoffice... I don't see any java in ovirt repo.. Is it really true such a dependency at a low level? 1.7.0.9-2.3.3.2 vs 1.7.0.9-2.3.3.fc18.1 what an universally runnable language... ;-) If I try to remove java Dependencies Resolved ======================================================================================================================================= Package Arch Version Repository Size ======================================================================================================================================= Removing: java-1.7.0-openjdk x86_64 1:1.7.0.9-2.3.3.fc18.1 @fedora 89 M Removing for dependencies: icedtea-web x86_64 1.3.1-1.fc18 @fedora 873 k libreoffice-calc x86_64 1:3.6.3.2-8.fc18 @fedora 23 M libreoffice-core x86_64 1:3.6.3.2-8.fc18 @fedora 219 M libreoffice-draw x86_64 1:3.6.3.2-8.fc18 @fedora 2.2 M libreoffice-graphicfilter x86_64 1:3.6.3.2-8.fc18 @fedora 1.1 M libreoffice-impress x86_64 1:3.6.3.2-8.fc18 @fedora 3.1 M libreoffice-langpack-en x86_64 1:3.6.3.2-8.fc18 @fedora 0.0 libreoffice-langpack-it x86_64 1:3.6.3.2-8.fc18 @fedora 27 M libreoffice-math x86_64 1:3.6.3.2-8.fc18 @fedora 3.2 M libreoffice-pdfimport x86_64 1:3.6.3.2-8.fc18 @fedora 1.5 M libreoffice-presenter-screen x86_64 1:3.6.3.2-8.fc18 @fedora 2.2 M libreoffice-ure x86_64 1:3.6.3.2-8.fc18 @fedora 8.6 M libreoffice-writer x86_64 1:3.6.3.2-8.fc18 @fedora 15 M libreoffice-xsltfilter x86_64 1:3.6.3.2-8.fc18 @fedora 1.9 M Transaction Summary ======================================================================================================================================= Remove 1 Package (+14 Dependent packages)

1 1

[Users] yum repo file to be corrected n web site
by Gianluca Cecchi 06 Jan '13

06 Jan '13

Hello, I noticed that the page http://www.ovirt.org/Yum_repo_file doesn't contain correct info. for example for stable baseurl=http://ovirt.org/releases/stable/fedora/$releasever/$basearch/ instead of what contained in file generaed by installation of ovirt-release-fedora.noarch.rpm (downloaded from http://ovirt.org/releases/ovirt-release-fedora.noarch.rpm) Also wrong for nightly and missing reference for alpha and beta repos As I have rights to edit wiki, can I correct or is there any reason I don't know or change in plan? Gianluca

1 0

Re: [Users] "ataX: resetting link" problem with ovirt 3.1 on Fedora Core 17
by Yuval M 06 Jan '13

06 Jan '13

uname -a output: Linux segfault.home 3.6.5-1.fc17.x86_64 #1 SMP Wed Oct 31 19:37:18 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux and the other host: Linux kernelpanic.home 3.6.8-2.fc17.x86_64 #1 SMP Tue Nov 27 19:35:02 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux if there is any other diagnostic information required I will happily supply it, just tell me what... Yuval On Fri, Jan 4, 2013 at 7:15 PM, Marcelo Barbosa < mr.marcelo.barbosa(a)gmail.com> wrote: > Hi Yuval, > > What is kernel version ? The oVirt stable version(3.1) run better from: > > [admin@firehome ~]$ uname -a > Linux firehome.no-ip.org *3.3.4-5*.fc17.x86_64 #1 SMP Mon May 7 17:29:34 > UTC 2012 x86_64 x86_64 x86_64 GNU/Linux > > Marcelo Barbosa > *mr.marcelo.barbosa(a)gmail.com* > > > On Fri, Jan 4, 2013 at 2:59 PM, Yuval M <yuvalme(a)gmail.com> wrote: > >> Hello, >> We're M.Sc students at Tel-Aviv University trying to setup a basic ovirt >> system with 2 hosts. >> Both run Fedora Core 17. >> >> We've run unto a problem that makes the hosts seem down from the web >> management UI and stops the VMs that run on them. >> this occurs on both hosts at the very same second, which leads me to >> believe it's not a hardware problem: >> ("segfault" is the name of the server. don't ask.) >> >> Has anyone seen something like this? >> any suggestions? >> Thanks, >> >> Yuval Meir >> Limor Gavish >> >> >> >> Dec 29 14:00:10 segfault kernel: [403596.851539] NFS: Cache request >> denied due to non-unique superblock keys >> Dec 29 14:00:10 segfault kernel: [403596.930361] ata1: hard resetting link >> Dec 29 14:00:10 segfault kernel: [403597.237778] ata1: SATA link down >> (SStatus 0 SControl 300) >> Dec 29 14:00:10 segfault kernel: [403597.239721] ata1: EH complete >> Dec 29 14:00:10 segfault kernel: [403597.241759] ata2: hard resetting link >> Dec 29 14:00:10 segfault kernel: [403597.548726] ata2: SATA link up 6.0 >> Gbps (SStatus 133 SControl 300) >> Dec 29 14:00:10 segfault kernel: [403597.559061] ata2.00: configured for >> UDMA/133 >> Dec 29 14:00:10 segfault kernel: [403597.559066] ata2: EH complete >> Dec 29 14:00:10 segfault kernel: [403597.559279] ata3: hard resetting link >> Dec 29 14:00:11 segfault kernel: [403597.866689] ata3: SATA link down >> (SStatus 0 SControl 300) >> Dec 29 14:00:11 segfault kernel: [403597.868680] ata3: EH complete >> Dec 29 14:00:11 segfault kernel: [403597.868928] ata4: hard resetting link >> Dec 29 14:00:11 segfault kernel: [403598.176588] ata4: SATA link down >> (SStatus 0 SControl 300) >> Dec 29 14:00:11 segfault kernel: [403598.178470] ata4: EH complete >> Dec 29 14:00:11 segfault kernel: [403598.178707] ata5: hard resetting link >> Dec 29 14:00:11 segfault kernel: [403598.485535] ata5: SATA link down >> (SStatus 0 SControl 300) >> Dec 29 14:00:11 segfault kernel: [403598.487472] ata5: EH complete >> Dec 29 14:00:11 segfault kernel: [403598.487656] ata6: hard resetting link >> Dec 29 14:00:12 segfault kernel: [403598.795437] ata6: SATA link down >> (SStatus 0 SControl 300) >> Dec 29 14:00:12 segfault kernel: [403598.797325] ata6: EH complete >> Dec 29 14:00:12 segfault kernel: [403598.797583] ata7: hard resetting link >> Dec 29 14:00:12 segfault kernel: [403599.105616] ata7: SATA link down >> (SStatus 0 SControl 300) >> Dec 29 14:00:12 segfault kernel: [403599.107307] ata7: EH complete >> Dec 29 14:00:12 segfault kernel: [403599.109318] ata8: hard resetting link >> Dec 29 14:00:12 segfault kernel: [403599.416217] ata8: SATA link up 1.5 >> Gbps (SStatus 113 SControl 300) >> Dec 29 14:00:12 segfault kernel: [403599.416650] ata8.00: configured for >> UDMA/66 >> Dec 29 14:00:12 segfault kernel: [403599.416769] ata8: EH complete >> Dec 29 14:00:12 segfault kernel: [403599.416922] ata9: hard resetting link >> Dec 29 14:00:13 segfault kernel: [403599.722240] ata9: SATA link down >> (SStatus 0 SControl 300) >> Dec 29 14:00:13 segfault kernel: [403599.722256] ata9: EH complete >> Dec 29 14:00:13 segfault kernel: [403599.722545] ata10: hard resetting >> link >> Dec 29 14:00:13 segfault kernel: [403600.027130] ata10: SATA link down >> (SStatus 0 SControl 300) >> Dec 29 14:00:13 segfault kernel: [403600.027234] ata10: EH complete >> Dec 29 14:00:13 segfault kernel: [403600.027483] ata11.00: hard resetting >> link >> Dec 29 14:00:13 segfault kernel: [403600.331952] ata11.01: hard resetting >> link >> Dec 29 14:00:14 segfault kernel: [403600.787975] ata11.00: SATA link up >> 3.0 Gbps (SStatus 123 SControl 300) >> Dec 29 14:00:14 segfault kernel: [403600.787989] ata11.01: SATA link down >> (SStatus 0 SControl 300) >> Dec 29 14:00:14 segfault kernel: [403600.829480] ata11.00: configured for >> UDMA/133 >> Dec 29 14:00:14 segfault kernel: [403600.829487] ata11: EH complete >> Dec 29 14:00:14 segfault kernel: [403600.829638] ata12.00: hard resetting >> link >> Dec 29 14:00:14 segfault kernel: [403601.133734] ata12.01: hard resetting >> link >> Dec 29 14:00:14 segfault kernel: [403601.589741] ata12.00: SATA link up >> 3.0 Gbps (SStatus 123 SControl 300) >> Dec 29 14:00:14 segfault kernel: [403601.589757] ata12.01: SATA link up >> 3.0 Gbps (SStatus 123 SControl 300) >> Dec 29 14:00:14 segfault kernel: [403601.600049] ata12.00: configured for >> UDMA/133 >> Dec 29 14:00:14 segfault kernel: [403601.604444] ata12.01: configured for >> UDMA/133 >> Dec 29 14:00:14 segfault kernel: [403601.604450] ata12: EH complete >> Dec 29 14:00:14 segfault kernel: [403601.604745] ata13: hard resetting >> link >> Dec 29 14:00:15 segfault kernel: [403601.921125] ata13: SATA link down >> (SStatus 0 SControl 300) >> Dec 29 14:00:15 segfault kernel: [403601.921144] ata13: EH complete >> Dec 29 14:00:15 segfault kernel: [403601.921300] ata14: hard resetting >> link >> Dec 29 14:00:15 segfault kernel: [403602.377523] ata14: SATA link up 1.5 >> Gbps (SStatus 113 SControl 300) >> Dec 29 14:00:15 segfault kernel: [403602.386842] ata14.00: configured for >> UDMA/100 >> Dec 29 14:00:15 segfault kernel: [403602.392491] ata14: EH complete >> Dec 29 14:00:15 segfault kernel: [403602.392695] ata15: soft resetting >> link >> Dec 29 14:00:15 segfault kernel: [403602.543523] ata15: EH complete >> Dec 29 14:00:15 segfault kernel: [403602.543727] ata16: soft resetting >> link >> Dec 29 14:00:16 segfault kernel: [403602.706229] ata16: EH complete >> Dec 29 14:00:16 segfault vdsm Storage.LVM WARNING lvm vgs failed: 5 [] [' >> Volume group "78b1f41d-29cf-4e1a-a84d-fb9175f4388e" not found'] >> Dec 29 14:00:16 segfault kernel: [403603.273230] ata1: hard resetting link >> Dec 29 14:00:16 segfault kernel: [403603.580216] ata1: SATA link down >> (SStatus 0 SControl 300) >> Dec 29 14:00:16 segfault kernel: [403603.582803] ata1: EH complete >> Dec 29 14:00:16 segfault kernel: [403603.585201] ata2: hard resetting link >> Dec 29 14:00:17 segfault kernel: [403603.892210] ata2: SATA link up 6.0 >> Gbps (SStatus 133 SControl 300) >> Dec 29 14:00:17 segfault kernel: [403603.901635] ata2.00: configured for >> UDMA/133 >> Dec 29 14:00:17 segfault kernel: [403603.901641] ata2: EH complete >> Dec 29 14:00:17 segfault kernel: [403603.901873] ata3: hard resetting link >> Dec 29 14:00:17 segfault kernel: [403604.209120] ata3: SATA link down >> (SStatus 0 SControl 300) >> Dec 29 14:00:17 segfault kernel: [403604.210966] ata3: EH complete >> Dec 29 14:00:17 segfault kernel: [403604.211156] ata4: hard resetting link >> Dec 29 14:00:17 segfault kernel: [403604.517966] ata4: SATA link down >> (SStatus 0 SControl 300) >> Dec 29 14:00:17 segfault kernel: [403604.519902] ata4: EH complete >> Dec 29 14:00:17 segfault kernel: [403604.520157] ata5: hard resetting link >> Dec 29 14:00:18 segfault kernel: [403604.826862] ata5: SATA link down >> (SStatus 0 SControl 300) >> Dec 29 14:00:18 segfault kernel: [403604.828830] ata5: EH complete >> Dec 29 14:00:18 segfault kernel: [403604.829067] ata6: hard resetting link >> Dec 29 14:00:18 segfault kernel: [403605.135731] ata6: SATA link down >> (SStatus 0 SControl 300) >> Dec 29 14:00:18 segfault kernel: [403605.137698] ata6: EH complete >> Dec 29 14:00:18 segfault kernel: [403605.137887] ata7: hard resetting link >> Dec 29 14:00:18 segfault kernel: [403605.445714] ata7: SATA link down >> (SStatus 0 SControl 300) >> Dec 29 14:00:18 segfault kernel: [403605.447619] ata7: EH complete >> Dec 29 14:00:18 segfault kernel: [403605.449682] ata8: hard resetting link >> Dec 29 14:00:19 segfault kernel: [403605.756684] ata8: SATA link up 1.5 >> Gbps (SStatus 113 SControl 300) >> Dec 29 14:00:19 segfault kernel: [403605.757166] ata8.00: configured for >> UDMA/66 >> Dec 29 14:00:19 segfault kernel: [403605.757266] ata8: EH complete >> Dec 29 14:00:19 segfault kernel: [403605.757485] ata9: hard resetting link >> Dec 29 14:00:19 segfault kernel: [403606.064643] ata9: SATA link down >> (SStatus 0 SControl 300) >> Dec 29 14:00:19 segfault kernel: [403606.064660] ata9: EH complete >> Dec 29 14:00:19 segfault kernel: [403606.064839] ata10: hard resetting >> link >> Dec 29 14:00:19 segfault kernel: [403606.369548] ata10: SATA link down >> (SStatus 0 SControl 300) >> Dec 29 14:00:19 segfault kernel: [403606.369562] ata10: EH complete >> Dec 29 14:00:19 segfault kernel: [403606.369842] ata11.00: hard resetting >> link >> Dec 29 14:00:20 segfault kernel: [403606.675420] ata11.01: hard resetting >> link >> Dec 29 14:00:20 segfault kernel: [403607.131342] ata11.00: SATA link up >> 3.0 Gbps (SStatus 123 SControl 300) >> Dec 29 14:00:20 segfault kernel: [403607.131355] ata11.01: SATA link down >> (SStatus 0 SControl 300) >> Dec 29 14:00:20 segfault kernel: [403607.248752] ata11.00: configured for >> UDMA/133 >> Dec 29 14:00:20 segfault kernel: [403607.248759] ata11: EH complete >> Dec 29 14:00:20 segfault kernel: [403607.249045] ata12.00: hard resetting >> link >> Dec 29 14:00:20 segfault kernel: [403607.554194] ata12.01: hard resetting >> link >> Dec 29 14:00:21 segfault kernel: [403608.011215] ata12.00: SATA link up >> 3.0 Gbps (SStatus 123 SControl 300) >> Dec 29 14:00:21 segfault kernel: [403608.011244] ata12.01: SATA link up >> 3.0 Gbps (SStatus 123 SControl 300) >> Dec 29 14:00:21 segfault kernel: [403608.021439] ata12.00: configured for >> UDMA/133 >> Dec 29 14:00:21 segfault kernel: [403608.028239] ata12.01: configured for >> UDMA/133 >> Dec 29 14:00:21 segfault kernel: [403608.028243] ata12: EH complete >> Dec 29 14:00:21 segfault kernel: [403608.028442] ata13: hard resetting >> link >> Dec 29 14:00:21 segfault kernel: [403608.345178] ata13: SATA link down >> (SStatus 0 SControl 300) >> Dec 29 14:00:21 segfault kernel: [403608.345195] ata13: EH complete >> Dec 29 14:00:21 segfault kernel: [403608.345443] ata14: hard resetting >> link >> Dec 29 14:00:22 segfault kernel: [403608.800805] ata14: SATA link up 1.5 >> Gbps (SStatus 113 SControl 300) >> Dec 29 14:00:22 segfault kernel: [403608.810109] ata14.00: configured for >> UDMA/100 >> Dec 29 14:00:22 segfault kernel: [403608.815632] ata14: EH complete >> Dec 29 14:00:22 segfault kernel: [403608.815863] ata15: soft resetting >> link >> Dec 29 14:00:22 segfault kernel: [403608.966859] ata15: EH complete >> Dec 29 14:00:22 segfault kernel: [403608.967054] ata16: soft resetting >> link >> Dec 29 14:00:22 segfault kernel: [403609.130010] ata16: EH complete >> Dec 29 14:00:22 segfault vdsm Storage.LVM WARNING lvm vgs failed: 5 [] [' >> Volume group "f0175c0c-75f1-4518-ba77-f7476171f6c6" not found'] >> Dec 29 14:00:22 segfault vdsm Storage.StorageDomain WARNING Resource >> namespace f0175c0c-75f1-4518-ba77-f7476171f6c6_imageNS already registered >> Dec 29 14:00:22 segfault vdsm Storage.StorageDomain WARNING Resource >> namespace f0175c0c-75f1-4518-ba77-f7476171f6c6_volumeNS already registered >> Dec 29 14:00:23 segfault vdsm Storage.LVM WARNING lvm vgs failed: 5 [] [' >> Volume group "78b1f41d-29cf-4e1a-a84d-fb9175f4388e" not found'] >> >> _______________________________________________ >> Users mailing list >> Users(a)ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> >

2 2

Re: [Users] Wiki: Network summary page
by Dan Kenigsberg 06 Jan '13

06 Jan '13

On Thu, Jan 03, 2013 at 05:12:12PM +0100, Adrian Gibanel wrote: > As I mentioned on another message I've been given wiki edition permissions. I was supposed to write a way of having hostonly networks thanks to libvirt and thanks to a former mailing list message but... Here's what happened. I wanted to know if there was something in the wiki about it and... So... > > Here's my wiki page: > http://www.ovirt.org/User:Adrian15 > > And here there's a kind of Network summary of what you can find on the oVirt wiki itself about network and mainly my thoughts about them: > http://www.ovirt.org/User:Adrian15/Network_Index > > As you can see there are some ideas: > > * The mockups are not clearly defined as such in their own pages and there should be a common header for that > * Some mockups are too hidden from main page. > * There's no a central way of knowing the supported oVirt network topologies (now with my index it's a bit easier) > * Network stuff is messed up with some bits in one place and some bits in another place. > > Not sure when I'll be able to write to continue this Network index writing and the host-only one because I've already a lot of time with this little summary but if you think that I can search for another term in wiki search instead of "Network" that unveils other networks page don't hesitate to tell me it. > > So... Enjoy and improve! (As this is a wiki). Thanks, Adrian. Revamping the networking topic on the wiki is a great initiative - it should not be tucked away in a personal sub page. It would be great if you could tag network-related pages with a "Networking" category, and move your summary to that category's page. P.s I am a bit confused on what you mean about hostonly network - is this related to http://www.ovirt.org/Features/Nicless_Network ?

1 0

Re: [Users] What do you want to see in oVirt next?
by Andrew Cathrow 06 Jan '13

06 Jan '13

----- Original Message ----- > From: "David Jaša" <djasa(a)redhat.com> > To: "Bret Palsson" <bret(a)getjive.com> > Cc: users(a)ovirt.org > Sent: Friday, January 4, 2013 10:20:22 AM > Subject: Re: [Users] What do you want to see in oVirt next? > > Bret Palsson píše v Pá 04. 01. 2013 v 08:05 -0700: > > I'd like to see a built in VNC console that is java or a Spice java > > console, something that runs cross platform, OS X, Windows, Linux > > etc... > > There are purely browser-based solutions for both: noVNC (mature > AFAIK) > and spice-html5 (still in beta quality, developers welcome). The > problem Beta quality is probably a little optimistic for spice-htm4 > with both is that they require websockets on server side which is not > yet ready in qemu - spice-server implementation had to be reverted > and You can run a novnc server on another host to proxy it - similar to what Horizon does. > will need a rewrite and libvncserver gained initial support just few > months ago. > > I'm sure that web-based consoles will be available in oVirt shortly > after all layers below get the necessary features. > > David > > > > > On Fri, Jan 4, 2013 at 7:04 AM, David Jaša <djasa(a)redhat.com> > > wrote: > > Marcelo Barbosa píše v Pá 04. 01. 2013 v 11:46 -0200: > > > Dear Itamar, > > > > > > > > > My dreams for oVirt 3.2: > > > > > > > > > 1) Packages CentOs 6.x (ovirt-engine, > > > ovirt-guest-agent); > > > 2) Resize VM disk from GUI ovirt-engine; > > > 3) Spice for Google Chrome, this browser run in > > > anywere > > O.S. and largest world use; > > > > > > spice-xpi 2.8 will support chrome/chromium but it will > > still > > be linux-only. > > > > David > > > > > 4) Show in Virtual Machines > General > ip/ip's from > > > vm > > OR Virtual Machines > Network Interfaces > show ip; > > > 5) ISO upload from GUI ovirt-engine the best option; > > > 6) Monitoring enviroment oVirt to Zabbix and > > > Nagios(total > > vms, mem clusters, and more...) example: > > https://github.com/dougsland/nagios-plugins-rhev > > > > > > > > > I think this would oVirt the project to another level, > > much higher ... > > > > > > > > > Thanks. > > > > > > Marcelo Barbosa > > > mr.marcelo.barbosa(a)gmail.com > > > > > > > > > On Fri, Jan 4, 2013 at 9:18 AM, Soeren Grunewald > > <soeren.grunewald(a)avionic-design.de> wrote: > > > On 01/03/2013 07:04 PM, Itamar Heim wrote: > > > On 01/03/2013 07:25 PM, Soeren Grunewald > > wrote: > > > On 01/03/2013 05:33 PM, Itamar > > > Heim > > wrote: > > > On 01/03/2013 06:28 PM, > > Soeren Grunewald wrote: > > > On 01/03/2013 > > > 05:08 > > PM, Itamar Heim wrote: > > > Hi > > > Everyone, > > > > > > as we > > > wrap > > oVirt 3.2, I wanted to check with oVirt users on what they > > > find > > good/useful in oVirt, and what they would like to see > > > > > improved/added in coming versions? > > > > > > A nice feature > > > would > > be to be able to migrate guests between AMD and > > > Intel host > > > machines. > > > KVM should be > > > able > > to support it [1]. I don't know if other hypervisors > > > are able/can to > > support this. Because oVirt aims to support different > > > hypervisors it > > > might > > be problematic. But I think offline migration > > > should be > > > possible. > > > > > > can you please elaborate > > what do you mean by offline migration? > > > > > > > > > With offline migration, I means > > > the > > guest is not running while moving > > > it from one host to another. > > > > > > I have 2 host machines for > > > testing. > > One is running on a AMD Opteron and > > > the other Intel Xeon. Since I can > > not put both machines in the same > > > cluster, I have specified a > > > cluster > > called AMD (for the opteron) and > > > another called Intel (for the > > > xeon). > > > Now I would like to move a guest > > from the AMD machine to the Intel > > > machine. Since the CPU does not > > match I can't. > > > > > > I'm not aware that you can't. > > > > > > > > > Ok, now is see my problem. > > > > > > > > > you should be able to move the VM from > > > one > > cluster to the other. > > > yes, it will see a different cpu model. > > > why > > is that an issue? > > > > > > > > > > > > To move the guest I need to "edit" the guest and > > than I can change the cluster. > > > > > > Thanks, > > > Soeren > > > > > > > > > > > > > > > I assume the solution for this > > > could > > be a generic cluster definition. > > > Something with a limited/specific > > cpu set equal to the qemu > > > configuration "-cpu qemu32" or > > > "-cpu > > qemu64". > > > > > > > > > Regards, > > > Soeren > > > > > > [...] > > > > > > > > > > > > > > > _______________________________________________ > > > Users mailing list > > > Users(a)ovirt.org > > > http://lists.ovirt.org/mailman/listinfo/users > > > > > > > > > > > > _______________________________________________ > > > Users mailing list > > > Users(a)ovirt.org > > > http://lists.ovirt.org/mailman/listinfo/users > > > > > > -- > > > > David Jaša, RHCE > > > > SPICE QE based in Brno > > GPG Key: 22C33E24 > > Fingerprint: 513A 060B D1B4 2A72 7F0D 0278 B125 CD00 22C3 > > 3E24 > > > > > > > > _______________________________________________ > > Users mailing list > > Users(a)ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > > > > > > _______________________________________________ > > Users mailing list > > Users(a)ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > > -- > > David Jaša, RHCE > > SPICE QE based in Brno > GPG Key: 22C33E24 > Fingerprint: 513A 060B D1B4 2A72 7F0D 0278 B125 CD00 22C3 3E24 > > > > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users >

3 2

Re: [Users] Destktop VM to Server VM ?
by Michael Pasternak 06 Jan '13

06 Jan '13

On 01/03/2013 09:59 PM, Itamar Heim wrote: > On 01/03/2013 05:32 PM, Hideo Goto wrote: >> First of all, a Happy new year to every subscriber of the list. >> >> My first concern of the year about ovirt: >> >> Is it possible to change the type of an existing VM from desktop to >> server by any possible means? >> In my case, the VM was imported from KVM to Ovirt 3.0 environment >> using virt-v2v. I have just found out that the VM was recognized as >> desktop while expected as server . >> >> Thanks in advance for any advise. > > I'm pretty sure the REST API/SDK/CLI would allow this as updating this field of the VM. > michael? it's used to work afair, but now i see this: [oVirt shell (connected)]# show vm iscsi_desktop | grep type type : desktop [oVirt shell (connected)]# [oVirt shell (connected)]# update vm iscsi_desktop --type server error: status: 400 reason: Bad Request detail: Failed updating the properties of the VM. This may be caused either by: 1. The values selected are not appropriate for the VM; or 2. Its values cannot be updated while the VM is in UP state (Please shut down the VM in order to modify properties such as CPU or cluster). Omer? -- Michael Pasternak RedHat, ENG-Virtualization R&D

3 2

[Users] Storage Domain
by sirin 06 Jan '13

06 Jan '13

Hi all, Why offline Storage Domain with download iso image on storage? Download iso image and parallel installation OS fail ( may be this is bug? it's not correct… Artem

1 0

Re: [Users] Destktop VM to Server VM ?
by Hideo Goto 05 Jan '13

05 Jan '13

Thanks a lot Itamar. Everything became clear. Unfortunately, We are still using ovirt 3.0, for which I think ovirt-shell is not available. So, I will make a small java program. Best RGDS 2013/1/5 Itamar Heim <iheim(a)redhat.com> > On 01/04/2013 07:04 PM, Hideo Goto wrote: > >> Thaks a lot for your suggestion. >> >> in fact I found the <type>parameter which specifies server/desktop, >> checking the output of VMs' parameters by REST (/api/vms). >> Is it this very "type" paramter to change? >> > > yes. > > > >> Best RGDS >> Hideo GOTO >> >> P.S. >> I would be happy if you could recomend me any tool, if existing, >> which might make it easy to update parameters by REST. >> > > ovirt-shell is a cli tool which should let you update such a parameter > with a one liner command. > you can also use the python or java sdk's for any heavier scripting. > > > >> 2013/1/4 Itamar Heim <iheim(a)redhat.com>: >> >>> On 01/03/2013 05:32 PM, Hideo Goto wrote: >>> >>>> >>>> First of all, a Happy new year to every subscriber of the list. >>>> >>>> My first concern of the year about ovirt: >>>> >>>> Is it possible to change the type of an existing VM from desktop to >>>> server by any possible means? >>>> In my case, the VM was imported from KVM to Ovirt 3.0 environment >>>> using virt-v2v. I have just found out that the VM was recognized as >>>> desktop while expected as server . >>>> >>>> Thanks in advance for any advise. >>>> >>> >>> >>> I'm pretty sure the REST API/SDK/CLI would allow this as updating this >>> field >>> of the VM. >>> michael? >>> >> > >

2 2

Re: [Users] Failed to import Vm from export to storagedomain
by Haim Ateya 05 Jan '13

05 Jan '13

Hi Ricky, its really interesting, the vm process failed to start as libvirt identified double use of same PCI address: Thread-3111::ERROR::2013-01-03 16:30:27,373::vm::617::vm.Vm::(_startUnderlyingVm) vmId=`9741c58b-e7b2-41d8-9f35-8ea79ca81528`::The vm start process failed Traceback (most recent call last): File "/usr/share/vdsm/vm.py", line 579, in _startUnderlyingVm self._run() File "/usr/share/vdsm/libvirtvm.py", line 1421, in _run self._connection.createXML(domxml, flags), File "/usr/lib64/python2.6/site-packages/vdsm/libvirtconnection.py", line 83, in wrapper ret = f(*args, **kwargs) File "/usr/lib64/python2.6/site-packages/libvirt.py", line 2489, in createXML if ret is None:raise libvirtError('virDomainCreateXML() failed', conn=self) libvirtError: XML error: Attempted double use of PCI Address '0:0:1.2' (may need "multifunction='on'" for device on function 0 Thread-3111::DEBUG::2013-01-03 16:30:27,377::vm::933::vm.Vm::(setDownStatus) vmId=`9741c58b-e7b2-41d8-9f35-8ea79ca81528`::Changed state to Down: XML error: Attempted double use of PCI Address '0:0:1.2' (may need "multifunction='on'" for device on function 0 from the VM xml, I see you trying to use 6 devices of USB with same PCI address: <controller type="usb"> <address bus="0x00" domain="0x0000" function="0x2" slot="0x01" type="pci"/> </controller> <controller type="usb"> <address bus="0x00" domain="0x0000" function="0x2" slot="0x01" type="pci"/> </controller> <controller type="usb"> <address bus="0x00" domain="0x0000" function="0x2" slot="0x01" type="pci"/> </controller> <controller type="usb"> <address bus="0x00" domain="0x0000" function="0x2" slot="0x01" type="pci"/> </controller> <controller type="usb"> <address bus="0x00" domain="0x0000" function="0x2" slot="0x01" type="pci"/> </controller> <controller type="usb"> <address bus="0x00" domain="0x0000" function="0x2" slot="0x01" type="pci"/> </controller> need to understand what went wrong there, was it the export attempt that created this problematic entry in the OVF file or was it the import? anyway, please open a bug for it. Haim ----- Original Message ----- > From: "Ricky" <rockybaloo(a)gmail.com> > To: Users(a)ovirt.org > Sent: Thursday, January 3, 2013 7:00:21 PM > Subject: [Users] Failed to import Vm from export to storagedomain > > Hi, > > So, Finally I reinstalled the whole cluster after I have exported > every VM. > > I followed this wiki > http://wiki.dreyou.org/dokuwiki/doku.php?id=ovirt_rpm_start31. > > Everything went up except that I just have one host installed in the > cluster. The other host is still serving the old cluster.... > > When trying to import my old VMs I got problems with some of them not > beeing imported. But 3 of my VMs did and one of them was my > mailserver... but when I try to start the VM I hit the wall again. > > I have attached the vdsm.log, right now I cant see the forest for all > the trees........ > > Regards //Ricky > > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users >

3 3

Re: [Users] ISO path is not empty
by Haim Ateya 05 Jan '13

05 Jan '13

I don't see any particular reason for blocking this in general, since we create our domain structure under /ISO/<sdUUID>/.. so it doesn't really matter. please open a bug for it. Haim ----- Original Message ----- > From: "Mohsen Saeedi" <mohsen.saeedi(a)gmail.com> > To: users(a)ovirt.org > Sent: Friday, January 4, 2013 10:49:25 AM > Subject: [Users] ISO path is not empty > > > Hi > I have a problem with Ovir t engine-setup. when i run it and in the > setup process then it checks the ISO local path and print a error: > directory /ISO is not empty > I make a new partition and make ext4 filesystem and the i mount it > under /ISO. we know it ha s a lost+foun d directory. i think it > should be fixed in newer version. > Thanks. > > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users >

1 0

Re: [Users] What do you want to see in oVirt next?
by Shu Ming 05 Jan '13

05 Jan '13

Jiri Belka : > On Thu, 03 Jan 2013 18:08:48 +0200 > Itamar Heim <iheim(a)redhat.com> wrote: > >> Hi Everyone, >> >> as we wrap oVirt 3.2, I wanted to check with oVirt users on what they >> find good/useful in oVirt, and what they would like to see >> improved/added in coming versions? > 1. Virtual Serial Port > * accessible via network > * accessible encrypted via network (qemu doesn't do it yet, IIRC) > * vSPC-like (virtual serial port concentrator) app which would act > as "proxy" to access individual VM's virtual serial ports > > - vmware docs: http://tinyurl.com/7dg3ll5 > - vSPC 3rd party info: > http://isnotajoke.com/vmware_virtual_serial_ports.html Here is the work undergoing: http://gerrit.ovirt.org/#/c/10381/ > > 2. Clustered engine > * 2 engine nodes making an app cluster both same priority > > 3. OS independent as possible > * engine talks to vdsmd, thus engine should not depend on any > Linux specific OS features; engine thus could with some work > be possible to install on *BSD, Solaris etc... > * add other OS types into engine (with nice icons), ESXi/VirtualBox > both offer other OS types besides Windows/Linux. > > jbelka > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > -- --- 舒明 Shu Ming Open Virtualization Engineerning; CSTL, IBM Corp. Tel: 86-10-82451626 Tieline: 9051626 E-mail: shuming(a)cn.ibm.com or shuming(a)linux.vnet.ibm.com Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC

1 0

[Users] Subject: Re: What do you want to see in oVirt next?
by Thomas Scofield 05 Jan '13

05 Jan '13

- Ovirt management server should be able to run as a virtual machine managed by ovirt - Clustered management server, active/passive, or even better active/active - Support for additional iternal users, so monitoring and automation don't need to rely on an external source for authentication - guest agent should have the ability to configure portions of the virtual machine -- set the hostname of the virtual machine -- configure the network information for the virtual machine -- reset root password > Hi Everyone, > > as we wrap oVirt 3.2, I wanted to check with oVirt users on what they > find good/useful in oVirt, and what they would like to see > improved/added in coming versions? > > Thanks, > Itamar

1 0

Re: [Users] ovirt and EqualLogic iSCSI SAN
by Gianluca Cecchi 05 Jan '13

05 Jan '13

On Fri, Jan 4, 2013 at 6:59 AM, Dan Yasny wrote: > BTW, if Dell try for a "not supported" again, you can point them to > > http://en.community.dell.com/techcenter/b/techcenter/archive/2013/01/03/ann… > > They have a similar announcement for 3.0: > > http://en.community.dell.com/techcenter/b/techcenter/archive/2012/07/13/red… worded slightly differently > > Useful links and related documents, but they only talk about support for the Dell server part in RHEV 3.x and related OpenManage sw while they never explicitly cite the storage array part in general, and Equallogic in particular... probably for some reason... Gianluca

1 0

[Users] Missing archives
by Karsten 'quaid' Wade 05 Jan '13

05 Jan '13

This is an OpenPGP/MIME signed message (RFC 2440 and 3156) --------------enig87AB028DD52DF6D3A58E2A06 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable On 21 Dec I fixed the archive for this mailing list at the request of a user. When I did that, I failed to set the permissions and ownership for the changed mailbox file. It remained owned by root, so Mailman was unable to write to the archives. :( :( I think we can fix this if anyone has a copy of all the email sent to this list since 21 Dec. in an .mbox format. Anyone have everything from 21 Dec. to this message I just sent (which should hit the archives)? - Karsten --=20 Karsten 'quaid' Wade, Sr. Analyst - Community Growth http://TheOpenSourceWay.org .^\ http://community.redhat.com @quaid (identi.ca/twitter/IRC) \v' gpg: AD0E0C41 --------------enig87AB028DD52DF6D3A58E2A06 Content-Type: application/pgp-signature; name="signature.asc" Content-Description: OpenPGP digital signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) Comment: Using GnuPG with undefined - http://www.enigmail.net/ iD8DBQFQ5yIr2ZIOBq0ODEERAoiHAKDezC4oZtKpa9z4ZSfceO+7eScbXgCgoKdN lOmulECyehwk3RqHkKQQe9Q= =p9Z2 -----END PGP SIGNATURE----- --------------enig87AB028DD52DF6D3A58E2A06--

2 3

[Users] F18 AIO with nightly build I don't find ISO domain
by Gianluca Cecchi 21 Dec '12

21 Dec '12

Hello, during AIO install with ovirt-engine-setup-3.2.0-1.20121217.git1e01c00.fc18.noarch I specified ISO domain not accepting default but setting /ISO Host correctly activated but no ISO domain found. I can see: [g.cecchi@f18aio ~]$ cat /etc/exports /ISO 0.0.0.0/0.0.0.0(rw) #rhev installer [g.cecchi@f18aio ~]$ sudo exportfs -v /ISO 0.0.0.0/0.0.0.0(rw,wdelay,root_squash,no_subtree_check) I cannot add the domain because I get: Error while executing action New Local Storage Domain: Error in creating a Storage Domain. The selected storage path is not empty (probably contains another Storage Domain). Either remove the existing Storage Domain from this path, or change the Storage path). I cannot import that domain because if I specify: Domain Function / Storage Type : ISO/NFS Use Host : local_host Export Path : f18aio:/ISO I get There is no storage domain under the specified path. Check event log for more details. In messages: Dec 20 12:33:03 f18aio rpc.mountd[1576]: authenticated mount request from 192.168.122.160:871 for /ISO (/ISO) Dec 20 12:33:05 f18aio kernel: [ 4748.963964] ata1: soft resetting link Dec 20 12:33:05 f18aio kernel: [ 4749.115677] ata1: EH complete Dec 20 12:33:06 f18aio kernel: [ 4749.966412] ata2: soft resetting link Dec 20 12:33:06 f18aio kernel: [ 4750.120449] ata2.00: configured for MWDMA2 Dec 20 12:33:06 f18aio kernel: [ 4750.120952] ata2: EH complete Dec 20 12:33:08 f18aio kernel: [ 4752.177808] ata1: soft resetting link Dec 20 12:33:08 f18aio kernel: [ 4752.330692] ata1: EH complete Dec 20 12:33:09 f18aio kernel: [ 4753.183308] ata2: soft resetting link Dec 20 12:33:09 f18aio kernel: [ 4753.337768] ata2.00: configured for MWDMA2 Dec 20 12:33:09 f18aio kernel: [ 4753.338555] ata2: EH complete In engine.log 2012-12-20 12:33:03,939 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.ValidateStorageServerConnectionVDSCommand] (ajp--127.0.0.1-8702-2) [73e31316] START, ValidateStorageServerConnectionVDSCommand(HostName = local_host, HostId = 6ae6e471-d46b-48f5-8b0f-6f5cc20b251e, storagePoolId = 00000000-0000-0000-0000-000000000000, storageType = NFS, connectionList = [{ id: null, connection: f18aio:/ISO, iqn: null, vfsType: null, mountOptions: null, nfsVersion: null, nfsRetrans: null, nfsTimeo: null };]), log id: f20d993 2012-12-20 12:33:03,944 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.ValidateStorageServerConnectionVDSCommand] (ajp--127.0.0.1-8702-2) [73e31316] FINISH, ValidateStorageServerConnectionVDSCommand, return: {00000000-0000-0000-0000-000000000000=0}, log id: f20d993 2012-12-20 12:33:03,952 INFO [org.ovirt.engine.core.bll.storage.AddStorageServerConnectionCommand] (ajp--127.0.0.1-8702-2) [73e31316] Running command: AddStorageServerConnectionCommand internal: false. Entities affected : ID: aaa00000-0000-0000-0000-123456789aaa Type: System 2012-12-20 12:33:03,954 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.ConnectStorageServerVDSCommand] (ajp--127.0.0.1-8702-2) [73e31316] START, ConnectStorageServerVDSCommand(HostName = local_host, HostId = 6ae6e471-d46b-48f5-8b0f-6f5cc20b251e, storagePoolId = 00000000-0000-0000-0000-000000000000, storageType = NFS, connectionList = [{ id: 309f07eb-ae33-4892-9415-a21c774a89e2, connection: f18aio:/ISO, iqn: null, vfsType: null, mountOptions: null, nfsVersion: null, nfsRetrans: null, nfsTimeo: null };]), log id: 3255e846 2012-12-20 12:33:03,996 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.ConnectStorageServerVDSCommand] (ajp--127.0.0.1-8702-2) [73e31316] FINISH, ConnectStorageServerVDSCommand, return: {309f07eb-ae33-4892-9415-a21c774a89e2=0}, log id: 3255e846 2012-12-20 12:33:04,021 INFO [org.ovirt.engine.core.bll.storage.GetExistingStorageDomainListQuery] (ajp--127.0.0.1-8702-2) START, GetExistingStorageDomainListQuery(org.ovirt.engine.core.common.queries.GetExistingStorageDomainListParameters@705c0fb1), log id: 6e3f186a 2012-12-20 12:33:04,024 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMGetStorageDomainsListVDSCommand] (ajp--127.0.0.1-8702-2) START, HSMGetStorageDomainsListVDSCommand(HostName = local_host, HostId = 6ae6e471-d46b-48f5-8b0f-6f5cc20b251e, storagePoolId=00000000-0000-0000-0000-000000000000, storageType=NFS, storageDomainType=ISO, path=f18aio:/ISO), log id: 1eb50b8c 2012-12-20 12:33:07,156 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HSMGetStorageDomainsListVDSCommand] (ajp--127.0.0.1-8702-2) FINISH, HSMGetStorageDomainsListVDSCommand, return: [52f15c20-82ef-4fe6-8609-9d43fa6ce72d], log id: 1eb50b8c 2012-12-20 12:33:07,163 INFO [org.ovirt.engine.core.bll.storage.GetExistingStorageDomainListQuery] (ajp--127.0.0.1-8702-2) FINISH, GetExistingStorageDomainListQuery, log id: 6e3f186a 2012-12-20 12:33:07,207 INFO [org.ovirt.engine.core.bll.storage.RemoveStorageServerConnectionCommand] (ajp--127.0.0.1-8702-2) [a59e1de] Running command: RemoveStorageServerConnectionCommand internal: false. Entities affected : ID: aaa00000-0000-0000-0000-123456789aaa Type: System 2012-12-20 12:33:07,211 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.DisconnectStorageServerVDSCommand] (ajp--127.0.0.1-8702-2) [a59e1de] START, DisconnectStorageServerVDSCommand(HostName = local_host, HostId = 6ae6e471-d46b-48f5-8b0f-6f5cc20b251e, storagePoolId = 00000000-0000-0000-0000-000000000000, storageType = NFS, connectionList = [{ id: null, connection: f18aio:/ISO, iqn: null, vfsType: null, mountOptions: null, nfsVersion: null, nfsRetrans: null, nfsTimeo: null };]), log id: 68961755 2012-12-20 12:33:10,326 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.DisconnectStorageServerVDSCommand] (ajp--127.0.0.1-8702-2) [a59e1de] FINISH, DisconnectStorageServerVDSCommand, return: {00000000-0000-0000-0000-000000000000=0}, log id: 68961755 2012-12-20 12:33:12,729 INFO [org.ovirt.engine.core.bll.LoginUserCommand] (ajp--127.0.0.1-8702-2) Checking if user admin@internal is an admin, result true 2012-12-20 12:33:12,729 INFO [org.ovirt.engine.core.bll.LoginUserCommand] (ajp--127.0.0.1-8702-2) Running command: LoginUserCommand internal: false. 2012-12-20 12:33:12,739 WARN [org.ovirt.engine.core.bll.GetConfigurationValueQuery] (ajp--127.0.0.1-8702-2) calling GetConfigurationValueQuery (ApplicationMode) with null version, using default general for version 2012-12-20 12:33:12,740 WARN [org.ovirt.engine.core.bll.GetConfigurationValueQuery] (ajp--127.0.0.1-8702-2) calling GetConfigurationValueQuery (VdcVersion) with null version, using default general for version Thanks, Gianluca

3 3

[Users] Ovirt Node rebooting +/- every 10 days
by EricD 21 Dec '12

21 Dec '12

I have oVirt 3.1 with two nodes, one of them is running good without restarting the other keep restarting, the maximum uptime that the server can get is 10 days before it restart, I think that it might be something related to the disk. FYI, the disk are 2 disk of 1TB (RAID-0) to get 2TB. # /var/log/messages Dec 21 05:28:44 hypervisor01a ntpd[945]: 0.0.0.0 c61c 0c clock_step +17997.588918 s Dec 21 05:28:44 hypervisor01a ntpd[945]: 0.0.0.0 c614 04 freq_mode Dec 21 05:28:45 hypervisor01a kdump: No crashkernel parameter specified for running kernel Dec 21 05:28:45 hypervisor01a kdumpctl[1366]: Starting kdump: Dec 21 05:28:45 hypervisor01a kdump: failed to start up Dec 21 05:28:45 hypervisor01a systemd[1]: kdump.service: main process exited, code=exited, status=1 Dec 21 05:28:45 hypervisor01a systemd[1]: Unit kdump.service entered failed state. Dec 21 05:28:45 hypervisor01a systemd[1]: Startup finished in 888ms 157us (kernel) + 2s 521ms 289us (initrd) + 15s 577ms 672us (userspace) = 18s 987ms 118us. Dec 21 05:28:45 hypervisor01a ntpd[945]: 0.0.0.0 c618 08 no_sys_peer Dec 21 05:29:04 hypervisor01a vdsm TaskManager.Task ERROR Task=`5f51ff52-f9a4-4854-a41d-d5d33c872458`::Unexpected error Dec 21 05:29:04 hypervisor01a vdsm Storage.Dispatcher.Protect ERROR {'status': {'message': "Unknown pool id, pool not connected: ('dbb49db6-9a24-4395-a8bd-c9f222eaecab',)", 'code': 309}} Dec 21 05:29:04 hypervisor01a vdsm TaskManager.Task ERROR Task=`7b0cf3b0-6d26-4421-a221-29f2ecaaeb1f`::Unexpected error Dec 21 05:29:04 hypervisor01a vdsm Storage.Dispatcher.Protect ERROR {'status': {'message': "Unknown pool id, pool not connected: ('dbb49db6-9a24-4395-a8bd-c9f222eaecab',)", 'code': 309}} Dec 21 05:29:04 hypervisor01a kernel: [ 37.944421] ata1: hard resetting link Dec 21 05:29:04 hypervisor01a kernel: [ 38.247979] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Dec 21 05:29:04 hypervisor01a kernel: [ 38.248802] ata1.00: configured for UDMA/133 Dec 21 05:29:04 hypervisor01a kernel: [ 38.248807] ata1: EH complete Dec 21 05:29:04 hypervisor01a kernel: [ 38.249013] ata2: hard resetting link Dec 21 05:29:04 hypervisor01a kernel: [ 38.553112] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Dec 21 05:29:04 hypervisor01a kernel: [ 38.553881] ata2.00: configured for UDMA/133 Dec 21 05:29:04 hypervisor01a kernel: [ 38.553886] ata2: EH complete Dec 21 05:29:04 hypervisor01a kernel: [ 38.554064] ata3: hard resetting link Dec 21 05:29:05 hypervisor01a kernel: [ 38.858275] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Dec 21 05:29:05 hypervisor01a kernel: [ 38.861154] ata3.00: configured for UDMA/133 Dec 21 05:29:05 hypervisor01a kernel: [ 38.861159] ata3: EH complete Dec 21 05:29:05 hypervisor01a kernel: [ 38.861352] ata4: hard resetting link Dec 21 05:29:05 hypervisor01a kernel: [ 39.165397] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Dec 21 05:29:05 hypervisor01a kernel: [ 39.168223] ata4.00: configured for UDMA/133 Dec 21 05:29:05 hypervisor01a kernel: [ 39.168229] ata4: EH complete Dec 21 05:29:05 hypervisor01a kernel: [ 39.168421] ata5: hard resetting link Dec 21 05:29:05 hypervisor01a kernel: [ 39.472459] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Dec 21 05:29:05 hypervisor01a kernel: [ 39.480040] ata5.00: configured for UDMA/100 Dec 21 05:29:05 hypervisor01a kernel: [ 39.485478] ata5: EH complete Dec 21 05:29:05 hypervisor01a kernel: [ 39.485642] ata6: limiting SATA link speed to 1.5 Gbps Dec 21 05:29:05 hypervisor01a kernel: [ 39.485647] ata6: hard resetting link Dec 21 05:29:06 hypervisor01a kernel: [ 39.790610] ata6: SATA link down (SStatus 0 SControl 310) # RAID-0 mdadm --detail /dev/md127 /dev/md127: Version : 1.2 Creation Time : Sun Nov 18 14:47:15 2012 Raid Level : raid0 Array Size : 1953524736 (1863.03 GiB 2000.41 GB) Raid Devices : 2 Total Devices : 2 Persistence : Superblock is persistent Update Time : Sun Nov 18 14:47:15 2012 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Chunk Size : 512K Name : hypervisor01-a:0 (local to host hypervisor01-a) UUID : 9eb1324d:57eed46d:c23ae815:0666e238 Events : 0 Number Major Minor RaidDevice State 0 253 2 0 active sync /dev/dm-2 1 253 3 1 active sync /dev/dm-3

1 0

[Users] ovirt-shell bug ?
by Alex Leonhardt 21 Dec '12

21 Dec '12

Hi, am trying to use .ovirtshellrc with a set user, pass and url, however, I keep getting this instead: error: invalid literal for int() with base 10: '' and I remain disconnected. Using the same url and creds to connect manually works - is it a bug or just some setting ? Alex

2 4

[Users] ovirt-shell, action vm vmhost start issue ?
by Alex Leonhardt 21 Dec '12

21 Dec '12

Hi, am trying to start a VM with special kernel and initrd options : [oVirt shell (connected)]# action vm cent6 start --vm-os-kernel "/var/www/html/repo/centos/6/os/x86_64/images/pxeboot/vmlinuz" --vm-os-initRd "/var/www/html/repo/centos/6/os/x86_64/images/pxeboot/initrd.img" --vm-os-boot "{ip=x.x.x.x;netmask=x.x.x.x;gateway=x.x.x.x;dns=x.x.x.x}" However, I keep getting this back : error: "initRd" is invalid argument segment. Eventhough, the help says that it's a valid command option : ATTRIBUTE OPTIONS The following attribute options are understood. Note: this lists all available attribute options for action 'start'. [--vm-os-initRd: string] [--vm-domain-name: string] [--vm-placement_policy-host-id|name: string] [--vm-placement_policy-affinity: string] [--async: boolean] [--vm-os-kernel: string] [--grace_period-expiry: long] [--vm-display-type: string] [--vm-stateless: boolean] [--vm-os-cmdline: string] [--vm-domain-user-username: string] [--pause: boolean] [--vm-os-boot: collection] { [boot.dev: string] } [--vm-domain-user-password: string] [--correlation_id: anystring] Alex

2 1

[Users] Bug in ovirt-deploy script
by Joop 21 Dec '12

21 Dec '12

I think I found a bug in a module of the ovirt-host-deploy script. I'm (still) using F17 with the latest nightly being: rpm -aq | grep ovirt ovirt-engine-cli-3.2.0.7-1.20121217.git5eddf58.fc17.noarch ovirt-engine-dbscripts-3.2.0-1.20121219.gitcd0d2cc.fc17.noarch ovirt-iso-uploader-3.1.0-1.fc17.noarch ovirt-engine-userportal-3.2.0-1.20121219.gitcd0d2cc.fc17.noarch ovirt-engine-setup-3.2.0-1.20121219.gitcd0d2cc.fc17.noarch ovirt-engine-tools-common-3.2.0-1.20121219.gitcd0d2cc.fc17.noarch ovirt-engine-backend-3.2.0-1.20121219.gitcd0d2cc.fc17.noarch ovirt-host-deploy-0.0.0-0.0.master.20121219.git817103d.fc17.noarch ovirt-engine-sdk-3.2.0.5-1.20121217.gitc0ab704.fc17.noarch ovirt-engine-restapi-3.2.0-1.20121219.gitcd0d2cc.fc17.noarch ovirt-engine-genericapi-3.2.0-1.20121219.gitcd0d2cc.fc17.noarch ovirt-engine-config-3.2.0-1.20121219.gitcd0d2cc.fc17.noarch ovirt-engine-webadmin-portal-3.2.0-1.20121219.gitcd0d2cc.fc17.noarch ovirt-host-deploy-java-0.0.0-0.0.master.20121219.git817103d.fc17.noarch ovirt-engine-notification-service-3.2.0-1.20121219.gitcd0d2cc.fc17.noarch ovirt-release-fedora-5-2.noarch ovirt-image-uploader-3.1.0-1.fc17.noarch ovirt-engine-3.2.0-1.20121219.gitcd0d2cc.fc17.noarch ovirt-log-collector-3.1.0-1.fc17.noarch I'm using a Cluster with the Gluster bit checked and when adding that host it errors out with a rather annoying error: package 'v' not found. Turns out that the last line of Mgmt01/usr/share/ovirt-host-deploy/plugins/ovirt-host-deploy/gluster/packages.py is wrong, there is a ',' missing. I changed it to: def _packages(self): self.packager.installUpdate(('vdsm-gluster',)) And when I now try to deploy my host in the gluster Cluster it tries to install vdsm-gluster package and dependancies. It now fails in /usr/share/vdsm/addNetwork where it complaines about ConfigNetworkError: (21, 'Both PREFIX and NETMASK supplied') This host has already been an ovirt installed host. I could for testing remove all traces of ovirt but I have another host where I tried that and now it stops its networking when vdsmd starts ;-( Went ahead and removed PREFIX and reran deploy. The bridge ovirtmgmt is correctly created BUT there is an error in the log: INFO:root:Adding network ovirtmgmt with vlan=, bonding=, nics=['em1'], bondingOptions=None, mtu=None, bridged=True, options={'blockingdhcp': 'true', 'UUID': 'e121a99a-994e-479d-8de1-a56c14315545', 'USERCTL': 'no', 'DNS2': '172.19.1.18', 'DNS1': '172.19.1.12', 'bootproto': 'none', 'onboot': 'yes', 'IPV6INIT': 'no'} libvir: Network Driver error : Network not found: no network with matching name 'vdsm-ovirtmgmt' libvir: Network Driver error : Network not found: no network with matching name 'vdsm-ovirtmgmt' libvir: Network Driver error : Requested operation is not valid: cannot set autostart for transient network Looking at /etc/libvirt/qemu/networks/* shows indeed there are references to vdsm-ovirtmgt. Maybe this is because I'm also using fedora-virt-preview-repo because the nightlies need a newer libvirt. Let me know if a slightly lower version of libvirt will fix this. Joop

2 2

[Users] v2v - converting windows VMs
by Alex Leonhardt 21 Dec '12

21 Dec '12

Hi, i've read up about converting Windows VMs and it needs some "Guest Tools CD" - https://access.redhat.com/knowledge/docs/en-US/Red_Hat_Enterprise_Virtualiz… where can one get that CD/iso image and whatever else is required ? Alex

1 2

Re: [Users] [Bug 881579] kernel-3.6.7-4 causes panic on FreeBSD KVM guest with >1 CPU
by Karli Sjöberg 20 Dec '12

20 Dec '12

--_000_5F9E965F5A80BC468BE5F40576769F090E8807ADexchange21_ Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: base64 b25zIDIwMTItMTItMTkga2xvY2thbiAwMToyOCArMDAwMCBza3JldiBidWd6aWxsYUByZWRoYXQu Y29tOg0KDQoNClByb2R1Y3Q6IEZlZG9yYQ0KaHR0cHM6Ly9idWd6aWxsYS5yZWRoYXQuY29tL3No b3dfYnVnLmNnaT9pZD04ODE1NzkNCg0KLS0tIENvbW1lbnQgIzMgZnJvbSBNYXJjZWxvIFRvc2F0 dGkgPG10b3NhdHRpQHJlZGhhdC5jb208bWFpbHRvOm10b3NhdHRpQHJlZGhhdC5jb20+PiAtLS0N Ckl0cyB2ZXJ5IGxpa2VseSB0aGUgY2F1c2UgZm9yIHRoaXMgYXJlIGluc3RydWN0aW9uIGVtdWxh dGlvbiB1cHN0cmVhbQ0KKGVtdWxhdGlvbiBvZiBpbnZhbGlkIGd1ZXN0IHN0YXRlIGJ5IGRlZmF1 bHQpLg0KDQpUaGVzZSBhcmUgYmVpbmcgZml4ZWQgdXBzdHJlYW0uIE9uY2UgdGhhdCBpcyBjb21w bGV0ZWQsIGl0IHdpbGwgYmUgbmVjZXNzYXJ5IHRvDQpiYWNrcG9ydA0KdG8gRkMxNy4NCg0KSW4g dGhlIG1lYW50aW1lLCBsb2FkaW5nIGt2bS1pbnRlbC5rbyB3aXRoIGVtdWxhdGVfaW52YWxpZF9n dWVzdF9zdGF0ZT0wIHNob3VsZA0Kd29yayBhcm91bmQgdGhlIHByb2JsZW0gKHRlc3RlZCBsb2Nh bGx5IG9uIGt2bS5naXQgYXMgb2YgZGVjLzIwMTIpLg0KDQoNCg0KRm9yIGZ1dHVyZSByZWZlcmVu Y2UsIEkgd2FudCB0byBhZGQgd2hhdCBtZWFzdXJlcyBoYXZlIGJlZW4gdGFrZW46DQoNCkZyb20g b1ZpcnQgV2ViYWRtaW4sIHRoZSBIb3N0IHdhcyBzZXQgaW50byBNYWludGVuYW5jZS4NCg0KVGhl biB0aGlzIGZpbGU6DQovZXRjL3N5c2NvbmZpZy9tb2R1bGVzL2t2bS5tb2R1bGVzOg0KIyEvYmlu L3NoDQoNCmdyZXAgdm14IC9wcm9jL2NwdWluZm8gPi9kZXYvbnVsbCAyPiYxICYmIHZteD0xDQpn cmVwIHN2bSAvcHJvYy9jcHVpbmZvID4vZGV2L251bGwgMj4mMSAmJiBzdm09MQ0KDQppZiBbICIk dm14IiBdIHx8IFsgIiRzdm0iIF07IHRoZW4NCiAgWyAiJHZteCIgXSAmJiBtb2Rwcm9iZSAtYiA+ L2Rldi9udWxsIDI+JjENCiAgWyAiJHN2bSIgXSAmJiBtb2Rwcm9iZSAtYiBrdm0tYW1kID4vZGV2 L251bGwgMj4mMQ0KDQogICMgbm8gcmVhc29uIHdoeSB2aG9zdCBzaG91bGQgbm90IHdvcmsgd2l0 aCBUQ0csIGJ1dCBjdXJyZW50bHkgaXQgZG9lcyBub3QNCiAgbW9kcHJvYmUgLWIgdmhvc3QtbmV0 ID4vZGV2L251bGwgMj4mMQ0KZWxzZQ0KICBleGl0IDANCmZpDQoNCldhcyBtb2RmaWVkIHRvIGxv b2sgbGlrZToNCiMhL2Jpbi9zaA0KDQpncmVwIHZteCAvcHJvYy9jcHVpbmZvID4vZGV2L251bGwg Mj4mMSAmJiB2bXg9MQ0KZ3JlcCBzdm0gL3Byb2MvY3B1aW5mbyA+L2Rldi9udWxsIDI+JjEgJiYg c3ZtPTENCg0KaWYgWyAiJHZteCIgXSB8fCBbICIkc3ZtIiBdOyB0aGVuDQogIFsgIiR2bXgiIF0g JiYgbW9kcHJvYmUgLWIga3ZtLWludGVsIGVtdWxhdGVfaW52YWxpZF9ndWVzdF9zdGF0ZT0wID4v ZGV2L251bGwgMj4mMQ0KICBbICIkc3ZtIiBdICYmIG1vZHByb2JlIC1iIGt2bS1hbWQgPi9kZXYv bnVsbCAyPiYxDQoNCiAgIyBubyByZWFzb24gd2h5IHZob3N0IHNob3VsZCBub3Qgd29yayB3aXRo IFRDRywgYnV0IGN1cnJlbnRseSBpdCBkb2VzIG5vdA0KICBtb2Rwcm9iZSAtYiB2aG9zdC1uZXQg Pi9kZXYvbnVsbCAyPiYxDQplbHNlDQogIGV4aXQgMA0KZmkNCg0KQW5kIGFmdGVyIHR3byByZWJv b3RzKGRpZG7CtHQgZ2V0IHNldCBhZnRlciB0aGUgZmlyc3QgcmVib290LCBzdHJhbmdseSBlbm91 Z2gpIHRoZSBzZXR0aW5nIGhhdmUgYmVlbiBjb25maXJtZWQgcGVyc2lzdGFudCB3aXRoOg0KIyBt b3JlIC9zeXMvbW9kdWxlL2t2bV9pbnRlbC9wYXJhbWV0ZXJzL2VtdWxhdGVfaW52YWxpZF9ndWVz dF9zdGF0ZQ0KTg0KDQpUaGUgSG9zdCB3YXMgYWdhaW4gYWN0aXZhdGVkIGFuZCB0aGUgZ3Vlc3Qg cGFuaWNzIGFyZSBnb25lLg0KDQpUaGFua3MgZm9yIHRoZSBoaW50IQ0KDQovS2FybGkNCg0K --_000_5F9E965F5A80BC468BE5F40576769F090E8807ADexchange21_ Content-Type: text/html; charset="utf-8" Content-Transfer-Encoding: base64 PCFET0NUWVBFIEhUTUwgUFVCTElDICItLy9XM0MvL0RURCBIVE1MIDQuMCBUUkFOU0lUSU9OQUwv L0VOIj4NCjxodG1sPg0KPGhlYWQ+DQo8bWV0YSBodHRwLWVxdWl2PSJDb250ZW50LVR5cGUiIGNv bnRlbnQ9InRleHQvaHRtbDsgY2hhcnNldD11dGYtOCI+DQo8bWV0YSBuYW1lPSJHRU5FUkFUT1Ii IGNvbnRlbnQ9Ikd0a0hUTUwvNC40LjQiPg0KPC9oZWFkPg0KPGJvZHk+DQpvbnMgMjAxMi0xMi0x OSBrbG9ja2FuIDAxOjI4ICYjNDM7MDAwMCBza3JldiBidWd6aWxsYUByZWRoYXQuY29tOg0KPGJs b2NrcXVvdGUgdHlwZT0iQ0lURSI+DQo8cHJlPgpQcm9kdWN0OiBGZWRvcmEKPGEgaHJlZj0iaHR0 cHM6Ly9idWd6aWxsYS5yZWRoYXQuY29tL3Nob3dfYnVnLmNnaT9pZD04ODE1NzkiPmh0dHBzOi8v YnVnemlsbGEucmVkaGF0LmNvbS9zaG93X2J1Zy5jZ2k/aWQ9ODgxNTc5PC9hPgoKLS0tIENvbW1l bnQgIzMgZnJvbSBNYXJjZWxvIFRvc2F0dGkgJmx0OzxhIGhyZWY9Im1haWx0bzptdG9zYXR0aUBy ZWRoYXQuY29tIj5tdG9zYXR0aUByZWRoYXQuY29tPC9hPiZndDsgLS0tCkl0cyB2ZXJ5IGxpa2Vs eSB0aGUgY2F1c2UgZm9yIHRoaXMgYXJlIGluc3RydWN0aW9uIGVtdWxhdGlvbiB1cHN0cmVhbQoo ZW11bGF0aW9uIG9mIGludmFsaWQgZ3Vlc3Qgc3RhdGUgYnkgZGVmYXVsdCkuCgpUaGVzZSBhcmUg YmVpbmcgZml4ZWQgdXBzdHJlYW0uIE9uY2UgdGhhdCBpcyBjb21wbGV0ZWQsIGl0IHdpbGwgYmUg bmVjZXNzYXJ5IHRvCmJhY2twb3J0CnRvIEZDMTcuCgpJbiB0aGUgbWVhbnRpbWUsIGxvYWRpbmcg a3ZtLWludGVsLmtvIHdpdGggZW11bGF0ZV9pbnZhbGlkX2d1ZXN0X3N0YXRlPTAgc2hvdWxkCndv cmsgYXJvdW5kIHRoZSBwcm9ibGVtICh0ZXN0ZWQgbG9jYWxseSBvbiBrdm0uZ2l0IGFzIG9mIGRl Yy8yMDEyKS4KCjwvcHJlPg0KPC9ibG9ja3F1b3RlPg0KPGJyPg0KRm9yIGZ1dHVyZSByZWZlcmVu Y2UsIEkgd2FudCB0byBhZGQgd2hhdCBtZWFzdXJlcyBoYXZlIGJlZW4gdGFrZW46PGJyPg0KPGJy Pg0KRnJvbSBvVmlydCBXZWJhZG1pbiwgdGhlIEhvc3Qgd2FzIHNldCBpbnRvIE1haW50ZW5hbmNl Ljxicj4NCjxicj4NClRoZW4gdGhpcyBmaWxlOjxicj4NCjxiPi9ldGMvc3lzY29uZmlnL21vZHVs ZXMva3ZtLm1vZHVsZXM8L2I+Ojxicj4NCiMhL2Jpbi9zaDxicj4NCjxicj4NCmdyZXAgdm14IC9w cm9jL2NwdWluZm8gJmd0Oy9kZXYvbnVsbCAyJmd0OyZhbXA7MSAmYW1wOyZhbXA7IHZteD0xPGJy Pg0KZ3JlcCBzdm0gL3Byb2MvY3B1aW5mbyAmZ3Q7L2Rldi9udWxsIDImZ3Q7JmFtcDsxICZhbXA7 JmFtcDsgc3ZtPTE8YnI+DQo8YnI+DQppZiBbICZxdW90OyR2bXgmcXVvdDsgXSB8fCBbICZxdW90 OyRzdm0mcXVvdDsgXTsgdGhlbjxicj4NCiZuYnNwOyBbICZxdW90OyR2bXgmcXVvdDsgXSAmYW1w OyZhbXA7IG1vZHByb2JlIC1iICZndDsvZGV2L251bGwgMiZndDsmYW1wOzE8YnI+DQombmJzcDsg WyAmcXVvdDskc3ZtJnF1b3Q7IF0gJmFtcDsmYW1wOyBtb2Rwcm9iZSAtYiBrdm0tYW1kICZndDsv ZGV2L251bGwgMiZndDsmYW1wOzE8YnI+DQo8YnI+DQombmJzcDsgIyBubyByZWFzb24gd2h5IHZo b3N0IHNob3VsZCBub3Qgd29yayB3aXRoIFRDRywgYnV0IGN1cnJlbnRseSBpdCBkb2VzIG5vdDxi cj4NCiZuYnNwOyBtb2Rwcm9iZSAtYiB2aG9zdC1uZXQgJmd0Oy9kZXYvbnVsbCAyJmd0OyZhbXA7 MTxicj4NCmVsc2U8YnI+DQombmJzcDsgZXhpdCAwPGJyPg0KZmk8YnI+DQo8YnI+DQpXYXMgbW9k ZmllZCB0byBsb29rIGxpa2U6PGJyPg0KIyEvYmluL3NoPGJyPg0KPGJyPg0KZ3JlcCB2bXggL3By b2MvY3B1aW5mbyAmZ3Q7L2Rldi9udWxsIDImZ3Q7JmFtcDsxICZhbXA7JmFtcDsgdm14PTE8YnI+ DQpncmVwIHN2bSAvcHJvYy9jcHVpbmZvICZndDsvZGV2L251bGwgMiZndDsmYW1wOzEgJmFtcDsm YW1wOyBzdm09MTxicj4NCjxicj4NCmlmIFsgJnF1b3Q7JHZteCZxdW90OyBdIHx8IFsgJnF1b3Q7 JHN2bSZxdW90OyBdOyB0aGVuPGJyPg0KJm5ic3A7IFsgJnF1b3Q7JHZteCZxdW90OyBdICZhbXA7 JmFtcDsgbW9kcHJvYmUgLWIga3ZtLWludGVsIDxiPmVtdWxhdGVfaW52YWxpZF9ndWVzdF9zdGF0 ZT0wPC9iPiAmZ3Q7L2Rldi9udWxsIDImZ3Q7JmFtcDsxPGJyPg0KJm5ic3A7IFsgJnF1b3Q7JHN2 bSZxdW90OyBdICZhbXA7JmFtcDsgbW9kcHJvYmUgLWIga3ZtLWFtZCAmZ3Q7L2Rldi9udWxsIDIm Z3Q7JmFtcDsxPGJyPg0KPGJyPg0KJm5ic3A7ICMgbm8gcmVhc29uIHdoeSB2aG9zdCBzaG91bGQg bm90IHdvcmsgd2l0aCBUQ0csIGJ1dCBjdXJyZW50bHkgaXQgZG9lcyBub3Q8YnI+DQombmJzcDsg bW9kcHJvYmUgLWIgdmhvc3QtbmV0ICZndDsvZGV2L251bGwgMiZndDsmYW1wOzE8YnI+DQplbHNl PGJyPg0KJm5ic3A7IGV4aXQgMDxicj4NCmZpPGJyPg0KPGJyPg0KQW5kIGFmdGVyIDxiPnR3bzwv Yj4gcmVib290cyhkaWRuwrR0IGdldCBzZXQgYWZ0ZXIgdGhlIGZpcnN0IHJlYm9vdCwgc3RyYW5n bHkgZW5vdWdoKSB0aGUgc2V0dGluZyBoYXZlIGJlZW4gY29uZmlybWVkIHBlcnNpc3RhbnQgd2l0 aDo8YnI+DQojIG1vcmUgL3N5cy9tb2R1bGUva3ZtX2ludGVsL3BhcmFtZXRlcnMvZW11bGF0ZV9p bnZhbGlkX2d1ZXN0X3N0YXRlPGJyPg0KTjxicj4NCjxicj4NClRoZSBIb3N0IHdhcyBhZ2FpbiBh Y3RpdmF0ZWQgYW5kIHRoZSBndWVzdCBwYW5pY3MgYXJlIGdvbmUuPGJyPg0KPGJyPg0KVGhhbmtz IGZvciB0aGUgaGludCE8YnI+DQo8YnI+DQovS2FybGk8YnI+DQo8YnI+DQo8L2JvZHk+DQo8L2h0 bWw+DQo= --_000_5F9E965F5A80BC468BE5F40576769F090E8807ADexchange21_--

3 2