- Users - oVirt List Archives

Ovirt Migration Fail
by Fernando Fuentes 21 Oct '15

21 Oct '15

Team, I moved mi server from ovirt 3.4 to 3.5 and I am having a hard time migrating from kerberos/ldap to AAA. I have an old fedora 389 with no ssl and kerberos and new a server with fedora 389 with ssl but no kerberos. My ovirt server is pointed to the old fedora 389 server and because it has no ssl when I run the migration tool it fails because it requires --cacert so I decided to use my new ldap server but sense it does not has kerberos the tool fails to run. My question is... Is there a good guide or tutorial that I can be pointed to so I can setup AAA to use my new LDAP server? Thanks for the help! Regards, -- Fernando Fuentes Supervisor & Senior Systems Administrator Email: ffuentes(a)aasteel.com American Alloy Steel, Inc. Houston, Texas Website: http://www.aasteel.com Phone: 713-744-4222 Fax: 713-300-5688

2 1

about LXC and ovirt
by Giuseppe Ragusa 21 Oct '15

21 Oct '15

--_32f83bcc-43c9-436c-808b-5c521bcabddb_ Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable > On Tue=2C Oct 20=2C 2015 at 4:51 AM=2C Dan Kenigsberg <danken at redhat.c= om> wrote:=0A= > =0A= > > On Mon=2C Oct 19=2C 2015 at 09:16:06PM +0200=2C Johan Kooijman wrote:= =0A= > > > Never seen an update to this ticket. Are there any plans?=0A= > > >=0A= > > > On Tue=2C Jun 24=2C 2014 at 3:35 PM=2C Sven Kieske <S.Kieske at mittw= ald.de>=0A= > > wrote:=0A= > > >=0A= > > > >=0A= > > > >=0A= > > > > Am 24.06.2014 15:13=2C schrieb Nathana=EBl Blanchet:=0A= > > > > > Hi all=2C=0A= > > > > >=0A= > > > > > now rhel7 is out=2C it will become a part of the ovirt project in= a=0A= > > near=0A= > > > > > future. Given taht official LXC support aims to complete the KVM= =0A= > > > > > virtualization part=2C is LXC planned to be supported for linux = VM by=0A= > > > > > ovirt=2C like openvz is with proxmox?=0A= > > > >=0A= > > > > very good question=2C can't wait to read an answer!=0A= > > > > +1 from here.=0A= > >=0A= > > I'm not aware of current plans. We can consider this when ovirt-4.0=0A= > > feature request season opens.=0A= > >=0A= > > Until then=2C can you share your own use case for runnig LXC?=0A= > >=0A= > =0A= > It seems like Proxmox have quite the install base especially due to the= =0A= > ability to mix containers and "fat" VMs. AFAIK that's the only feature th= ey=0A= > have that is ahead of oVirt. And that install base should tell us this is= =0A= > indeed a feature needed and widely used.=0A= > =0A= > =0A= > >=0A= > > I'd love to see a vdsm hook that translates the qemu-kvm domxml into an= =0A= > > lxc one=2C as a first step. Anyone?=0A= > >=0A= > =0A= > That can be a fun project to do=2C but I'm not volunteering just yet =3B)= =0A= > =0A= > =0A= > >=0A= > > Dan.=0A= > > _______________________________________________=0A= > > Users mailing list=0A= > > Users at ovirt.org=0A= > > http://lists.ovirt.org/mailman/listinfo/users=0A= > >=0A= +1 A couple of related questions: *) what can we expect from the deprecation of libvirt LXC driver in RHEL? (= CentOS would follow suit=2C barring an extraordinary effort from the Virtua= lization SIG=2C akin to the Xen-on-CentOS one) *) dreaming of a future convergence of oVirt-node and Atomic would be... we= ll=2C just dreaming? =3B) Giuseppe = --_32f83bcc-43c9-436c-808b-5c521bcabddb_ Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <html> <head> <style></style></head> <body class=3D'hmmessage'><div dir=3D'ltr'><pre>&gt=3B On Tue=2C Oct 20=2C 2015 at 4:51 AM=2C Dan Kenigsberg = &lt=3Bdanken at redhat.com&gt=3B wrote:=0A= &gt=3B =0A= &gt=3B &gt=3B On Mon=2C Oct 19=2C 2015 at 09:16:06PM +0200=2C Johan Kooijma= n wrote:=0A= &gt=3B &gt=3B &gt=3B Never seen an update to this ticket. Are there any pl= ans?=0A= &gt=3B &gt=3B &gt=3B=0A= &gt=3B &gt=3B &gt=3B On Tue=2C Jun 24=2C 2014 at 3:35 PM=2C Sven Kieske &lt= =3BS.Kieske at mittwald.de&gt=3B=0A= &gt=3B &gt=3B wrote:=0A= &gt=3B &gt=3B &gt=3B=0A= &gt=3B &gt=3B &gt=3B &gt=3B=0A= &gt=3B &gt=3B &gt=3B &gt=3B=0A= &gt=3B &gt=3B &gt=3B &gt=3B Am 24.06.2014 15:13=2C schrieb Nathana=EBl Blan= chet:=0A= &gt=3B &gt=3B &gt=3B &gt=3B &gt=3B Hi all=2C=0A= &gt=3B &gt=3B &gt=3B &gt=3B &gt=3B=0A= &gt=3B &gt=3B &gt=3B &gt=3B &gt=3B now rhel7 is out=2C it will become a par= t of the ovirt project in a=0A= &gt=3B &gt=3B near=0A= &gt=3B &gt=3B &gt=3B &gt=3B &gt=3B future. Given taht official LXC support = aims to complete the KVM=0A= &gt=3B &gt=3B &gt=3B &gt=3B &gt=3B virtualization part=2C is LXC planned to= be supported for linux VM by=0A= &gt=3B &gt=3B &gt=3B &gt=3B &gt=3B ovirt=2C like openvz is with proxmox?=0A= &gt=3B &gt=3B &gt=3B &gt=3B=0A= &gt=3B &gt=3B &gt=3B &gt=3B very good question=2C can't wait to read an ans= wer!=0A= &gt=3B &gt=3B &gt=3B &gt=3B +1 from here.=0A= &gt=3B &gt=3B=0A= &gt=3B &gt=3B I'm not aware of current plans. We can consider this when ovi= rt-4.0=0A= &gt=3B &gt=3B feature request season opens.=0A= &gt=3B &gt=3B=0A= &gt=3B &gt=3B Until then=2C can you share your own use case for runnig LXC?= =0A= &gt=3B &gt=3B=0A= &gt=3B =0A= &gt=3B It seems like Proxmox have quite the install base especially due to = the=0A= &gt=3B ability to mix containers and "fat" VMs. AFAIK that's the only featu= re they=0A= &gt=3B have that is ahead of oVirt. And that install base should tell us th= is is=0A= &gt=3B indeed a feature needed and widely used.=0A= &gt=3B =0A= &gt=3B =0A= &gt=3B &gt=3B=0A= &gt=3B &gt=3B I'd love to see a vdsm hook that translates the qemu-kvm domx= ml into an=0A= &gt=3B &gt=3B lxc one=2C as a first step. Anyone?=0A= &gt=3B &gt=3B=0A= &gt=3B =0A= &gt=3B That can be a fun project to do=2C but I'm not volunteering just yet= =3B)=0A= &gt=3B =0A= &gt=3B =0A= &gt=3B &gt=3B=0A= &gt=3B &gt=3B Dan.=0A= &gt=3B &gt=3B _______________________________________________=0A= &gt=3B &gt=3B Users mailing list=0A= &gt=3B &gt=3B Users at ovirt.org=0A= &gt=3B &gt=3B http://lists.ovirt.org/mailman/listinfo/users=0A= &gt=3B &gt=3B=0A= </pre><div>+1</div><div> </div><div>A couple of related questions= :</div><div> </div><div>*) what can we expect from the deprecation of li= bvirt LXC driver in RHEL? (CentOS would follow suit=2C barring an extraordi= nary effort from the Virtualization SIG=2C akin to the Xen-on-CentOS one)</= div><div> </div><div>*) dreaming of a future convergence of oVirt-node a= nd Atomic would be... well=2C just dreaming? =3B)</div><div> </div><div>= Giuseppe</div><div> </div> </div></body> </html>= --_32f83bcc-43c9-436c-808b-5c521bcabddb_--

1 0

about LXC and ovirt
by Nathanaël Blanchet 20 Oct '15

20 Oct '15

This is a multi-part message in MIME format. --------------020605060407070503090903 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8bit Hi all, now rhel7 is out, it will become a part of the ovirt project in a near future. Given taht official LXC support aims to complete the KVM virtualization part, is LXC planned to be supported for linux VM by ovirt, like openvz is with proxmox? -- Nathanaël Blanchet Supervision réseau Pôle exploitation et maintenance Département des systèmes d'information 227 avenue Professeur-Jean-Louis-Viala 34193 MONTPELLIER CEDEX 5 Tél. 33 (0)4 67 54 84 55 Fax 33 (0)4 67 54 84 14 blanchet(a)abes.fr --------------020605060407070503090903 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body bgcolor="#FFFFFF" text="#000000"> Hi all, now rhel7 is out, it will become a part of the ovirt project in a near future. Given taht official LXC support aims to complete the KVM virtualization part, is LXC planned to  be supported for linux VM by ovirt, like openvz is with proxmox? <pre class="moz-signature" cols="72">-- Nathanaël Blanchet Supervision réseau Pôle exploitation et maintenance Département des systèmes d'information 227 avenue Professeur-Jean-Louis-Viala 34193 MONTPELLIER CEDEX 5 Tél. 33 (0)4 67 54 84 55 Fax 33 (0)4 67 54 84 14 <a class="moz-txt-link-abbreviated" href="mailto:blanchet@abes.fr">blanchet(a)abes.fr</a> </pre> </body> </html> --------------020605060407070503090903--

6 5

Mix local and shared storage same data center on ovirt3.6 rc?
by Liam Curtis 20 Oct '15

20 Oct '15

Hello, Sorry for double-post if the case (not sure if case-sensitive) Loving ovirt...Have reinstalled many a time trying to understand and thought I had this working, though now that everything operating properly it seems this functionality is not possible. I am running hosted engine over glusterfs and would also like to use some of the other bricks I have set up on the gluster host, but when I try to create a new gluster cluster in data center, I get error message: Failed to connect host <myhost> to Storage Pool Default. (which makes sense as storage is local, but trying to overcome this limitation) I dont want to use just gluster shared storage in same data center. Any way to work around this?

4 3

integrate iSCSI and FC on the same oVirt datacenter
by Kapetanakis Giannis 20 Oct '15

20 Oct '15

Hi, Not sure if this is the right place to ask but maybe someone can provide directions for my problem. I have a full FC setup with FC switch and FC HBAs on Linux (Centos) to access my storage. However we cannot afford expanding our FC infrastructure thus making it hard for us to add more nodes in the oVirt setup. FCoE requires compatible switches and adapters (correct?) which is also out of budget. Our storage supports only FC. I thought something like this might work: node[1]: FC - ISCSI <-> node[2]: ISCSI - FC share the FC block device over iscsi and then create a new FC target+initiator on the new node with same FC lun as the original? Could this work? How? Other ideas? regards, Giannis ps. a) a solution would also be to migrate completely to iSCSI but I'm trying to avoid that atm. b) another one would be to create a second datacenter for iSCSI but also trying to avoid that if I can

3 7

Re: [ovirt-users] Question about the ovirt-engine-sdk-java
by Michael Pasternak 20 Oct '15

20 Oct '15

------=_Part_258573_264923491.1445347258533 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Hi Salifou, OK, i see now, then you have two options: a) To extend the sdk: 1. extend java-sdk by allowing to inject custom headers in every request=C2= =A0(not trivial as all ovirt SDKs are auto-generated,but if its common case= , you may find yourself getting help from community/maintainers) 2. fork java-sdk customizing it for your needs I'd recommend the former as fork will leave you with no support/maintenance= from community plus you'll haveto implement new=C2=A0features by your own = (what will become a moving target very quickly)=20 b) Proxying the sdk You can implement dynamic proxy wrapping SDK's HttpProxy.java#execute and i= ntercept the context from there,but you've to stay tuned as backward compat= ibility is for interface and not for SDK internals,so "potentially" you can= find your code broken in one of the following upgrades hope it helps.=C2=A0 On Monday, October 19, 2015 6:05 PM, Salifou Sidi M. Malick <ssidimah@= redhat.com> wrote: =20 Hi Micheal, Thanks for replying. Unfortunately the headers are dynamic ... Here is the story: We implemented a custom RHEV-M AAA module for a client in order to allow their custom portal to make RHEV-M API=20 calls.=20 The custom AAA module requires extra dynamic data in the HTTP=20 request (as request headers for now but request parameters=20 should be fine too).=20 Their is no problem if they go with the REST API, I am just=20 trying to anticipate/identify potential integration problem ... It seems like they will have to use the REST API or modify the=20 java sdk ...=C2=A0=20 Thanks a lot, Salifou ----- Original Message ----- From: "Michael Pasternak" <mishka8520(a)yahoo.com> To: "Salifou Sidi M. Malick" <ssidimah(a)redhat.com> Cc: "Users" <users(a)ovirt.org> Sent: Sunday, October 18, 2015 5:45:05 AM Subject: Re: Question about the ovirt-engine-sdk-java Hi=C2=A0Salifou, Actually java sdk is=C2=A0intentionally=C2=A0hiding transport level interna= ls so developers could stay in java domain,if your headers are static, easi= est way would be using reverse proxy in a middle to intercept requests,=C2= =A0 can you tell me why do you need this? =20 =C2=A0 =C2=A0 On Friday, October 16, 2015 1:14 AM, Salifou Sidi M. Malick <= ssidimah(a)redhat.com> wrote: =C2=A0=20 Hi Micheal, I have a question about the ovirt-engine-sdk-java. Is there a way to add custom request headers to each RHEVM API call? Here is an example of a request that I would like to do: $ curl -v -k \ =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 -H "ID: user1(a)ad.xyz.com" \ =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 -H "PASSWORD: Pwssd" \ =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 -H "TARGET: kobe" \ =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 https://vm0.smalick.com/api/hosts I would like to add ID, PASSWORD and TARGET as HTTP request header.=20 Thanks, Salifou ------=_Part_258573_264923491.1445347258533 Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: quoted-printable <html><head></head><body><div style=3D"color:#000; background-color:#fff; f= ont-family:HelveticaNeue-Light, Helvetica Neue Light, Helvetica Neue, Helve= tica, Arial, Lucida Grande, sans-serif;font-size:13px"><div id=3D"yiv936631= 0362"><div id=3D"yui_3_16_0_1_1445338067930_7276"><div style=3D"color:#000;= background-color:#fff;font-family:HelveticaNeue-Light, Helvetica Neue Light= , Helvetica Neue, Helvetica, Arial, Lucida Grande, sans-serif;font-size:13p= x;" id=3D"yui_3_16_0_1_1445338067930_7275"><div dir=3D"ltr" id=3D"yiv936631= 0362yui_3_16_0_1_1445338067930_4283">Hi Sali= fou,</div><div dir=3D"ltr" id=3D"yiv9366310362yui_3_16_= 0_1_1445338067930_4283"> </div><div dir=3D"ltr" id=3D"yiv9366310362yui_= 3_16_0_1_1445338067930_4283">OK, i see now, = then you have two options:</div><div dir=3D"ltr" id=3D"yiv9366310362= yui_3_16_0_1_1445338067930_4283"> </div><div dir=3D"ltr" id=3D"yiv93663= 10362yui_3_16_0_1_1445338067930_4283">a) To extend the = sdk:</div><div dir=3D"ltr" id=3D"yiv9366310362yui_3_16_0_1_144533806= 7930_4283"> </div><div dir=3D"ltr" id=3D"yiv9366310362yui_3_16_0_1_144= 5338067930_4283">1. extend java-sdk by allow= ing to inject custom headers in every request (not trivial as all ovir= t SDKs are auto-generated,</di= v><div dir=3D"ltr" id=3D"yiv9366310362yui_3_16_0_1_1445338067930_4283"><spa= n style=3D"font-family: 'Helvetica Neue', 'Segoe UI', Helvetica, Arial, 'Lu= cida Grande', sans-serif;" class=3D"" id=3D"yui_3_16_0_1_1445338067930_9090= ">but if its common case, you may find yourself getting help from community= /maintainers)</div><div dir=3D"ltr" id=3D"yiv9366310362yui_3_16_0_1_= 1445338067930_4283"> </= div><div dir=3D"ltr" id=3D"yiv9366310362yui_3_16_0_1_1445338067930_4283"><s= pan class=3D"yiv9366310362" id=3D"yiv9366310362yui_3_16_0_1_1445338067930_4= 801" style=3D"font-family:'Helvetica Neue', 'Segoe UI', Helvetica, Arial, '= Lucida Grande', sans-serif;">2. fork java-sdk customizing it for your needs= </div><div dir=3D"ltr" id=3D"yiv9366310362yui_3_16_0_1_1445338067930= _4283"> </div><div dir=3D"ltr" id=3D"yiv9366310362yui_3_16_0_1_14453380= 67930_4283">I'd recommend the former as fork= will leave you with no support/maintenance from community plus you'll have= </div><div dir=3D"ltr" id=3D"yiv9366310362yui_3_16_0_1_1445338067930= _4283">to implement new features by yo= ur own (what will become a moving target very quickly)</div> <div class=3D"yiv9366310362qtdSeparateBR" id=3D"yui_3_16_0_1_1= 445338067930_7274" dir=3D"ltr">b) Proxying the sdk</div><div class=3D"yiv93= 66310362qtdSeparateBR" id=3D"yui_3_16_0_1_1445338067930_7274" dir=3D"ltr"><= br></div><div class=3D"yiv9366310362qtdSeparateBR" id=3D"yui_3_16_0_1_14453= 38067930_7274" dir=3D"ltr">You can implement dynamic proxy wrapping SDK's H= ttpProxy.java#execute and intercept the context from there,</div><div class= =3D"yiv9366310362qtdSeparateBR" id=3D"yui_3_16_0_1_1445338067930_7274" dir= =3D"ltr">but you've to stay tuned as backward compatibility is for interfac= e and not for SDK internals,</div><div class=3D"yiv9366310362qtdSeparateBR"= id=3D"yui_3_16_0_1_1445338067930_7274" dir=3D"ltr">so "potentially" you ca= n find your code broken in one of the following upgrades</div><div class=3D= "yiv9366310362qtdSeparateBR" id=3D"yui_3_16_0_1_1445338067930_7274" dir=3D"= ltr"> </div><div class=3D"yiv9366310362qtdSeparateBR" id=3D"yui_3_16_0_1= _1445338067930_7274" dir=3D"ltr">hope it helps.  <br= clear=3D"none"></div><div class=3D"yiv9366310362yqt0562777282" id=3D"yiv93= 66310362yqt81591"></div></div></div></div><div class=3D".yiv9366310362yahoo= _quoted" id=3D"yui_3_16_0_1_1445338067930_8533"> <div style=3D"font-family:= HelveticaNeue-Light, Helvetica Neue Light, Helvetica Neue, Helvetica, Arial= , Lucida Grande, sans-serif;font-size:13px;" id=3D"yui_3_16_0_1_14453380679= 30_8532"> <div style=3D"font-family:HelveticaNeue, Helvetica Neue, Helvetic= a, Arial, Lucida Grande, sans-serif;font-size:16px;" id=3D"yui_3_16_0_1_144= 5338067930_8531"> <div dir=3D"ltr" id=3D"yui_3_16_0_1_1445338067930_8554"> = On = Monday, October 19, 2015 6:05 PM, Salifou Sidi M. Malick <ssidimah@redha= t.com> wrote: </div> <div class=3D"yiv9366310362y_msg_container" id=3D"yui_3_16_= 0_1_1445338067930_8712">Hi Micheal, Th= anks for replying. Unfortunately the headers are dynamic ... Here is the story: We implemented a custom RHEV-M AAA module for a client in order to allow their custom portal to make RHEV-M API calls. The custom AAA module requi= res extra dynamic data in the HTTP request (as request h= eaders for now but request parameters should be fine too= ). Their is no problem if they go wit= h the REST API, I am just trying to anticipate/identify = potential integration problem ... It s= eems like they will have to use the REST API or modify the java sdk ...  Thanks a lot,<b= r clear=3D"none">Salifou <div class=3D= "yiv9366310362yqt8023103542" id=3D"yiv9366310362yqtfd83808"> ----- Original Message ----- From: "Michael Pasternak= " <<a rel=3D"nofollow" shape=3D"rect" ymailto=3D"mailto:mishka8520@yahoo= .com" target=3D"_blank" href=3D"mailto:mishka8520@yahoo.com">mishka8520@yah= oo.com</a>> To: "Salifou Sidi M. Malick" <<a rel=3D= "nofollow" shape=3D"rect" ymailto=3D"mailto:ssidimah@redhat.com" target=3D"= _blank" href=3D"mailto:ssidimah@redhat.com">ssidimah(a)redhat.com</a>> Cc: "Users" <<a rel=3D"nofollow" shape=3D"rect" ymailto= =3D"mailto:users@ovirt.org" target=3D"_blank" href=3D"mailto:users@ovirt.or= g">users(a)ovirt.org</a>> Sent: Sunday, October 18, 2015= 5:45:05 AM Subject: Re: Question about the ovirt-engine-= sdk-java Hi Salifou, Actually java sdk is intentionally hiding transport level i= nternals so developers could stay in java domain,if your headers are static= , easiest way would be using reverse proxy in a middle to intercept request= s,  can you tell me why do you ne= ed this?     On Friday, October 16, 2015 1:14 AM, Salifou Sidi = M. Malick <<a rel=3D"nofollow" shape=3D"rect" ymailto=3D"mailto:ssidimah= @redhat.com" target=3D"_blank" href=3D"mailto:ssidimah@redhat.com">ssidimah= @redhat.com</a>> wrote:   <br= clear=3D"none"> Hi Micheal, I have a = question about the ovirt-engine-sdk-java. Is there a way to add custom request headers to each RHEVM API call?<br= clear=3D"none"> Here is an example of a request that I w= ould like to do: $ curl -v -k \           -H "ID: <a rel=3D"nofollow" = shape=3D"rect" ymailto=3D"mailto:user1@ad.xyz.com" target=3D"_blank" href= =3D"mailto:user1@ad.xyz.com">user1(a)ad.xyz.com</a>" \ &nbs= p;         -H "PASSWORD: Pwssd" \ &nb= sp;         -H "TARGET: kobe" \ &nbsp= ;         <a rel=3D"nofollow" shape=3D"rect" target=3D"= _blank" href=3D"https://vm0.smalick.com/api/hosts">https://vm0.smalick.com/= api/hosts</a> I wou= ld like to add ID, PASSWORD and TARGET as HTTP request header. Thanks, Salifou </div> </div> </div> </div> </div></div></body></html> ------=_Part_258573_264923491.1445347258533--

1 0

just joined the list
by Johan Vermeulen 20 Oct '15

20 Oct '15

Hello All, I just joined the list and I can't wait to get " acquainted" with Ovirt I have about 150 people for who I have to provide a workstation, Internet access and accounts, and solve all their problems. About 40 work on laptops, the others use disk-less thin clients and ltsp. I hope to replace the ltps-part with Ovirt and Spice. The users are dispersed over some 15 locations. The entire setup runs on Centos. So far I've been looking at the Quick Start Guide, and got as far as setting up nfs. One thing would help a lot in this testing fase: I've set up the Ovirt-engine in Virtualbox. Is it also possible to configure and attach a ( Centos) host in Virtualbox? Greetings, J.

5 6

Creating a Instance
by Budur Nagaraju 19 Oct '15

19 Oct '15

HI , While a deploying a vm from the template ,its taking minimum 15 minutes is there any ways to solve the issues ? Thanks, Nagaraju

2 5

This VM is not managed by the engine
by Jaret Garcia 19 Oct '15

19 Oct '15

--=_223255a2b9290ae41a14342812244984 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Hi everyone,=0A=0AAfew weeks ago we had a problem with the SPM and all h= ost in the=0Acluster got stocked in contending, we restarted hosts one b= y one, and=0Athe issue was solved. Howerver we didn't notice that one se= rver even=0Ait never stop running, it changed its state some way and the= n no=0Achanges could be done to the VM, we tried to add more RAM and we= saw=0Athe message "Cannot run VM. This VM is not managed by the engine"= , so=0Awe ssh the VM an send it to reboot, and once we did that the VM n= ever=0Acame back, we still see the VM in the engine administration but i= t=0Adoes not show any information regarding to network, disk, and so. We= =0Acreated another VM to replace the services in the one we lost, howeve= r=0Awe need to recover the files in the lost VM, we believe the image=0A= should be in the storage but we haven't found a way to recover it,=0Asom= e time ago we came across a similar situation but at that time it=0Awas= a NFS data domain, so it was easier for us to go inside the=0Astorage s= erver an search for the VM ID to scp the image and mount it=0Asomewhere= else, this time the storage is iscsi and even we found that=0Athe hosts= mount the target in /rhev/data-center/mnt/blockSD/=C2=A0=C2=A0 we=0Aonl= y see there the active images for the cluster, can anyone point us=0Ahow= we can recover the lost image?=C2=A0 We know the VM ID and the Disk ID= =0Afrom Ovirt.=0A=0AOur Setup=0Aovirt version: 3.5.4 hosted engine=0A4 s= upermicro hosts running centos 7.1=0A1 iscsi storage server running Open= -E DSS v7 Lite=0A=0AThanks in advance=0A=0AJaret=0AEmail sent using Pack= et Mail - Email, Groupware and Calendaring for=0Athe cloud! --=_223255a2b9290ae41a14342812244984 Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: quoted-printable <html><body style=3D"font-family: Helvetica,Arial,sans-serif; font-size:= 12px;">Hi everyone, Afew weeks ago we had a problem with the SPM= and all host in the cluster got stocked in contending, we restarted hos= ts one by one, and the issue was solved. Howerver we didn't notice that= one server even it never stop running, it changed its state some way an= d then no changes could be done to the VM, we tried to add more RAM and= we saw the message "Cannot run VM. This VM is not managed by the engine= ", so we ssh the VM an send it to reboot, and once we did that the VM ne= ver came back, we still see the VM in the engine administration but it d= oes not show any information regarding to network, disk, and so. We crea= ted another VM to replace the services in the one we lost, however we ne= ed to recover the files in the lost VM, we believe the image should be i= n the storage but we haven't found a way to recover it, some time ago we= came across a similar situation but at that time it was a NFS data doma= in, so it was easier for us to go inside the storage server an search fo= r the VM ID to scp the image and mount it somewhere else, this time the= storage is iscsi and even we found that the hosts mount the target in /= rhev/data-center/mnt/blockSD/=C2=A0=C2=A0 we only see there the active i= mages for the cluster, can anyone point us how we can recover the lost i= mage?=C2=A0 We know the VM ID and the Disk ID from Ovirt. Our Set= up ovirt version: 3.5.4 hosted engine 4 supermicro hosts running c= entos 7.1 1 iscsi storage server running Open-E DSS v7 Lite Th= anks in advance Jaret Email sent using Packet Mail - Email, Gr= oupware and Calendaring for the cloud!</body></html> --=_223255a2b9290ae41a14342812244984--

3 3

Ha cluster 3 nodes but 1 slow
by Nicolas LIENARD 19 Oct '15

19 Oct '15

------LR35WVKSJTP2ZE0S9J713PVY1DHYNC Content-Transfer-Encoding: 8bit Content-Type: text/plain; charset=UTF-8 Hi Currently, i ve 3 nodes, 2 in same DC and a third in another DC. They are all bridged together through a vpn. I know a cluster is at least 3 nodes to satisfy the quorum. My question is to know if i can have my VM balancing on the 2 fast nodes with HA and glusterfs replica 2. And use the slow third node to satisfy quorum and a gluster geo-replication to act as a Backup. Let me know if this is technically suitable with Ovirt. Thanks a lot Regards Nico ------LR35WVKSJTP2ZE0S9J713PVY1DHYNC Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: 8bit Hi Currently, i ve 3 nodes, 2 in same DC and a third in another DC. They are all bridged together through a vpn. I know a cluster is at least 3 nodes to satisfy the quorum. My question is to know if i can have my VM balancing on the 2 fast nodes with HA and glusterfs replica 2. And use the slow third node to satisfy quorum and a gluster geo-replication to act as a Backup. Let me know if this is technically suitable with Ovirt. Thanks a lot Regards Nico ------LR35WVKSJTP2ZE0S9J713PVY1DHYNC--

4 4

how to remove orphaned image
by Jiří Sléžka 16 Oct '15

16 Oct '15

This is a cryptographically signed message in MIME format. --------------ms000507050905000209040402 Content-Type: multipart/mixed; boundary="------------050403050401030004020607" This is a multi-part message in MIME format. --------------050403050401030004020607 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: quoted-printable Hello, I have some orphaned images on a storage domain which are not visible=20 from manager and I would like to remove them. I found one proposed feature which would be useful but seems not exists=20 yet - http://www.ovirt.org/Features/Orphaned_Images Also I found this feature http://www.ovirt.org/Features/Domain_Scan but=20 there is no documentation how to use it. Could you suggest me safe manual steps to remove an orphaned image? btw. I know all info about this image - sdUUID, spUUID, imgUUID,=20 volUUID, volume path, logical volume on which is stored,... I am using=20 oVirt3.5.4 Thanks in advance, Jiri Slezka --------------050403050401030004020607 Content-Type: text/x-vcard; charset=utf-8; name="jiri_slezka.vcf" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="jiri_slezka.vcf" begin:vcard fn;quoted-printable:Ing. Ji=3DC5=3D99=3DC3=3DAD Sl=3DC3=3DA9=3DC5=3DBEka n;quoted-printable;quoted-printable:Sl=3DC3=3DA9=3DC5=3DBEka;Ji=3DC5=3D99= =3DC3=3DAD org;quoted-printable;quoted-printable:Slezsk=3DC3=3DA1 univerzita v Opav=3D= C4=3D9B;Centrum informa=3DC4=3D8Dn=3DC3=3DADch technologi=3DC3=3DAD adr;quoted-printable;quoted-printable:Na Rybn=3DC3=3DAD=3DC4=3D8Dku 1;;CI= T, Slezsk=3DC3=3DA1 univerzita v Opav=3DC4=3D9B;Opava;;74601;Czech Republ= ic email;internet:jiri.slezka@slu.cz title;quoted-printable:Spr=3DC3=3DA1vce s=3DC3=3DADt=3DC4=3D9B a aplikac=3D= C3=3DAD tel;work:+420 553 684 696 x-mozilla-html:FALSE url:http://www.slu.cz version:2.1 end:vcard --------------050403050401030004020607-- --------------ms000507050905000209040402 Content-Type: application/pkcs7-signature; name="smime.p7s" Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename="smime.p7s" Content-Description: Elektronicky podpis S/MIME MIAGCSqGSIb3DQEHAqCAMIACAQExDzANBglghkgBZQMEAgEFADCABgkqhkiG9w0BBwEAAKCC CWcwggScMIIDhKADAgECAhEAuOSLPwlcx/l5IqBlguM0fDANBgkqhkiG9w0BAQUFADA7MQsw CQYDVQQGEwJOTDEPMA0GA1UEChMGVEVSRU5BMRswGQYDVQQDExJURVJFTkEgUGVyc29uYWwg Q0EwHhcNMTQxMTEwMDAwMDAwWhcNMTYxMTA5MjM1OTU5WjBlMQswCQYDVQQGEwJDWjElMCMG A1UECgwcU2xlenNrw6EgdW5pdmVyeml0YSB2IE9wYXbEmzEYMBYGA1UEAwwPSmnFmcOtIFNs w6nFvmthMRUwEwYJKoZIhvcNAQkCFgZzbGV6a2EwggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAw ggEKAoIBAQDNcPHUXg4ZfD3shn/1zeMf8tyn/ZplDk1756hc+PVHYNO2VRP2p1HKRdtcfj1i 2V87na0EfMmfxM77dJJklSnAsCXrs0by2eHzdCz746vErs5VkSnZ1nhOWH7FViKadiyxmAv+ zXL+jkzb678GHsT2jPWdHjfhgQXAzd0hE5AqkQ3sRGRspsfruRmfgStEoE2+Ubq4jC69pBYW i80zdAUOc+9Kl5Zfolfo/TpFViXIo4i1FMgDRNYZAhBKpHz70zN/7VUqTl/7x9z3a6ytNC8J TbbMdj8SdWhRV0oyOOhYlFHL+1ZS0KtQ0iz5yWs9dCkq77LrTXCXaWSGBRlQ8H/5AgMBAAGj ggFvMIIBazAfBgNVHSMEGDAWgBRjTUNaGUg/xEbBArq/7g7lgrdmpjAdBgNVHQ4EFgQUNHjX Vei/P0DdklwoP8A3Tkq0XTYwDgYDVR0PAQH/BAQDAgWgMAwGA1UdEwEB/wQCMAAwHQYDVR0l BBYwFAYIKwYBBQUHAwQGCCsGAQUFBwMCMBgGA1UdIAQRMA8wDQYLKwYBBAGyMQECAh0wPwYD VR0fBDgwNjA0oDKgMIYuaHR0cDovL2NybC50Y3MudGVyZW5hLm9yZy9URVJFTkFQZXJzb25h bENBLmNybDByBggrBgEFBQcBAQRmMGQwOgYIKwYBBQUHMAKGLmh0dHA6Ly9jcnQudGNzLnRl cmVuYS5vcmcvVEVSRU5BUGVyc29uYWxDQS5jcnQwJgYIKwYBBQUHMAGGGmh0dHA6Ly9vY3Nw LnRjcy50ZXJlbmEub3JnMB0GA1UdEQQWMBSBEmppcmkuc2xlemthQHNsdS5jejANBgkqhkiG 9w0BAQUFAAOCAQEAJy6bixJ53paigwWwnXfipRly2TTkICwf4PtXw9hOBoYC17PbPpAoGBtT Dvz6pQW4woSJ4JbkkD9JKGPlZXt0fQgZKgbfQ7sRFQ54goOhvJYm+CFJUPiSXrZ/i1CUzI40 U3kXYbWOq99yKid5aUEaIub9E6cJY6fybt7ireTV2IKVNIm/AXWjjf6jxGVavQ1QzTxmRvfE sXpQis5jgCeJjRHhZ4BhwRChkIThLYfWTSYId9rbtuj3yjLjtJipDhHJEuIckgV8sCDbjbyt xo0WNLQmfL0KUVxvpfMfdZ3McGKwn7nQiqBcpsGI3+9pfmHkMzy4+rDGZCHkeyNNxEUpLDCC BMMwggOroAMCAQICEHP+V/rfuMUIgXtmuWvwLe8wDQYJKoZIhvcNAQEFBQAwga4xCzAJBgNV BAYTAlVTMQswCQYDVQQIEwJVVDEXMBUGA1UEBxMOU2FsdCBMYWtlIENpdHkxHjAcBgNVBAoT FVRoZSBVU0VSVFJVU1QgTmV0d29yazEhMB8GA1UECxMYaHR0cDovL3d3dy51c2VydHJ1c3Qu Y29tMTYwNAYDVQQDEy1VVE4tVVNFUkZpcnN0LUNsaWVudCBBdXRoZW50aWNhdGlvbiBhbmQg RW1haWwwHhcNMDkwNTE4MDAwMDAwWhcNMjgxMjMxMjM1OTU5WjA7MQswCQYDVQQGEwJOTDEP MA0GA1UEChMGVEVSRU5BMRswGQYDVQQDExJURVJFTkEgUGVyc29uYWwgQ0EwggEiMA0GCSqG SIb3DQEBAQUAA4IBDwAwggEKAoIBAQDIFdn1M2ojoZANz7sFRMOrH0o1hRohhaBP+PBA4kpD m/5bsbC/tFfcdYBBS2Qa9ttPb4/QJUU1+erLSvr72tPtRYgRlDbkzKgN78U9N+0We+PClZ5Y M38i+/j/7Oa+264KZSUih9pvhItG6ECGKD+/VgjiSumDouki+y36tigfkcHDcftTwCtOpAyh bp1V7ezhJIc6COINHOTETdDLJ/qEZObRl51WJFuTuykuQ+JBaj3iSmX8ml9ahoe8h8d5gJaZ UcaQD2SRmX0Q3awsAyrheGT+zj1O9CtQEUvRWNSbA/B/9TtTsFND+8UvxAQpGjqs11Xp0Q6V 0Tsxf3hPriktAgMBAAGjggFNMIIBSTAfBgNVHSMEGDAWgBSJgmd9xJ0mcABLtFBIfN49rgRu fTAdBgNVHQ4EFgQUY01DWhlIP8RGwQK6v+4O5YK3ZqYwDgYDVR0PAQH/BAQDAgEGMBIGA1Ud EwEB/wQIMAYBAf8CAQAwGAYDVR0gBBEwDzANBgsrBgEEAbIxAQICHTBYBgNVHR8EUTBPME2g S6BJhkdodHRwOi8vY3JsLnVzZXJ0cnVzdC5jb20vVVROLVVTRVJGaXJzdC1DbGllbnRBdXRo ZW50aWNhdGlvbmFuZEVtYWlsLmNybDBvBggrBgEFBQcBAQRjMGEwOAYIKwYBBQUHMAKGLGh0 dHA6Ly9jcnQudXNlcnRydXN0LmNvbS9VVE5BQUFDbGllbnRfQ0EuY3J0MCUGCCsGAQUFBzAB hhlodHRwOi8vb2NzcC51c2VydHJ1c3QuY29tMA0GCSqGSIb3DQEBBQUAA4IBAQAGK6lTLxPc XDkWzIafXkx7cvvsjVWKXpoK/1NMdvQGPVDPV/Ciz6+ZjKr+oBl2PpkDMvp1gziKu2uapQwT stQbduaULmeYWeORbAKQmpzIYEtVq8qIWo0r5WmVAwfR1A78JCIuWbFjpF/t2SNy5JzOOlxs H0+pAMkd/vp/RS22LoTdDyegWRhO1XYlRfSZJnnbb58j90O7Kw8Eo4EmLLd7Nfk9d19AIeZ/ HaWWWr3QyxY6bLthi4r9BDlECsss4cvOLhCYGtvgk+1JZGQIIJ+3o1Dwot3KtMZ8DD3nXhXc J4bkOjtSWherqQZTK50Jc2QcAcP9MNKHA2/kFQN6OV9oMYIDGjCCAxYCAQEwUDA7MQswCQYD VQQGEwJOTDEPMA0GA1UEChMGVEVSRU5BMRswGQYDVQQDExJURVJFTkEgUGVyc29uYWwgQ0EC EQC45Is/CVzH+XkioGWC4zR8MA0GCWCGSAFlAwQCAQUAoIIBmzAYBgkqhkiG9w0BCQMxCwYJ KoZIhvcNAQcBMBwGCSqGSIb3DQEJBTEPFw0xNTEwMDkwOTQ1MzBaMC8GCSqGSIb3DQEJBDEi BCCYcSUAVFdAShoH0mmivtJN8Z8pW2c+7b2W1UXeTxD46TBfBgkrBgEEAYI3EAQxUjBQMDsx CzAJBgNVBAYTAk5MMQ8wDQYDVQQKEwZURVJFTkExGzAZBgNVBAMTElRFUkVOQSBQZXJzb25h bCBDQQIRALjkiz8JXMf5eSKgZYLjNHwwYQYLKoZIhvcNAQkQAgsxUqBQMDsxCzAJBgNVBAYT Ak5MMQ8wDQYDVQQKEwZURVJFTkExGzAZBgNVBAMTElRFUkVOQSBQZXJzb25hbCBDQQIRALjk iz8JXMf5eSKgZYLjNHwwbAYJKoZIhvcNAQkPMV8wXTALBglghkgBZQMEASowCwYJYIZIAWUD BAECMAoGCCqGSIb3DQMHMA4GCCqGSIb3DQMCAgIAgDANBggqhkiG9w0DAgIBQDAHBgUrDgMC BzANBggqhkiG9w0DAgIBKDANBgkqhkiG9w0BAQEFAASCAQBeI5MXcqkzETdtdwbgPQ7ZynGY CTIYL/ktD7tSIuXQJ1LpGtruy1wgmk4Pik7iLPS4ZcDfbxkp+QGet258a24rXu4lbgM5oZep E2K+GdNJVuqsMRh+8u9GZw95BigAJpu3N7Zx2WLJyiBc9OIAZof6olE3dlgTTAt9/stlFetW E+Znfm96sBbb9QZ9Sl1ww1IiaXN9dxZ6UvOG8Dz77rF/jkbix1T2nrySWUKahq71wWCqyTD8 jNWV+3fyx1rzRwYtXovH5PnDWQFXx/dK8/OawUzhAN/9HigtWQPX4lGq5bk+5JbjGxznNGPi 2p4SxZFhG8WzsPEPW6axu0b77VqmAAAAAAAA --------------ms000507050905000209040402--

2 3

oVirt - High Availability
by Indunil Jayasooriya 16 Oct '15

16 Oct '15

Hi users, I have setup OVIRT 3.5 with* 2 REDHAT 7.1 hosts.* Everything is ok other than HA ( High Availability). To test HA, Documentation says, *Power Management is needed. * Could you pls let me know if this Power Management is a separate Device or does it come with a BRANDED Server such as HP, IBM or Dell? I have seen a* ILO* port in HP servers. Can I use it for HA ( High Availability) in ovirt? If *power management* is *present in Branded Servers*, Could you pls let me know some *Branded RHEL 7.1/CentOS 7.1 supported servers?* Then, I can use it for Production use. *This is an YOU TUBE video for HA.* https://www.youtube.com/watch?v=uHCnXGUMaS0 Is this a correct video for HA? I did some research. a few URLs. http://lists.ovirt.org/pipermail/users/2013-January/011519.html http://www.ovirt.org/OVirt_Administration_Guide#Host_Resilience https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Virtualiza… *what is **Soft-Fencing Hosts ?* ovirt doc gives below . ( http://www.ovirt.org/OVirt_Administration_Guide#Host_Resilience ) Soft-Fencing Hosts Sometimes a host becomes non-responsive due to an unexpected problem, and though VDSM is unable to respond to requests, the virtual machines that depend upon VDSM remain alive and accessible. In these situations, restarting VDSM returns VDSM to a responsive state and resolves this issue. oVirt 3.3 introduces "soft-fencing over SSH". Prior to oVirt 3.3, non-responsive hosts were fenced only by external fencing devices. In oVirt 3.3, the fencing process has been expanded to include "SSH Soft Fencing", a process whereby oVirt attempts to restart VDSM via SSH on non-responsive hosts. If oVirt fails to restart VDSM via SSH, the responsibility for fencing falls to the external fencing agent if an external fencing agent has been configured. *BUT, It does NOT say how to set it up? * *is there any step by step doc for it? * HOPE TO hear from you? -- cat /etc/motd Thank you Indunil Jayasooriya http://www.theravadanet.net/ http://www.siyabas.lk/sinhala_how_to_install.html - Download Sinhala Fonts

2 4

glusterfsd is not not default enabled after a host installation
by Nathanaël Blanchet 16 Oct '15

16 Oct '15

Hello, I noticed after several different installations that the glusterd daemon was not configured as "systemctl enabled" during a host installation. Is it a known bug? -- Nathanaël Blanchet Supervision réseau Pôle Infrastrutures Informatiques 227 avenue Professeur-Jean-Louis-Viala 34193 MONTPELLIER CEDEX 5 Tél. 33 (0)4 67 54 84 55 Fax 33 (0)4 67 54 84 14 blanchet(a)abes.fr

3 2

permission
by Budur Nagaraju 16 Oct '15

16 Oct '15

HI I have given permissions "vmcreator and Diskprofileruser" to users ,whenever user remove the vm will the disk get deleted from the storage ? Thanks, Nagaraju

2 1

Unable to import hosted engine storage domain in 3.6RC with FC storage
by Christopher Miersma 15 Oct '15

15 Oct '15

Hi All, I'm having an issue with the current release candidate for 3.6, running on CentOS 7. I'm trying to install the hosted engine on fibre channel storage. I can successfully install the VM, and get everything up and running, but the hosted engine VM itself does not appear in the web interface, nor does the storage domain on which the hosted engine's disks reside appear. When I create a new storage domain on the SAN, I can see the LUN on which the hosted engine resides, but it is greyed out. When I first started the cluster and got the host and engine VM installed and running, it gave me the message " The Hosted Engine Storage Domain doesn't exist. It shoudl be imported into the setup." I've tried importing and attaching the storage domain, but it simply doesn't appear in the interface to allow me to import it. I've tired every Attach/Import/Activate screen that I could find. I've also opened a bug report (https://bugzilla.redhat.com/show_bug.cgi?id=1267337) but with no success so far. Has anyone else had a similar issue? Can you import the hosted engine storage domain after setup, and if so on what kind of storage? From some of the posts I've seen, it looks like people are getting it to work with NFS and maybe iSCSI, but I haven't seen anyone else mention Fibre Channel. Christopher Miersma

2 3

AIO UPG from 3.5 to 3.6 - Dependency Error on vdsm-jsonrpc-java
by Christian Rebel 15 Oct '15

15 Oct '15

This is a multipart message in MIME format. ------=_NextPart_000_011D_01D1077C.4FC73710 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable I=B4m getting the below Dependency Error on an AIO UPG from 3.5 to 3.6, = any ideas how to fix it?=20 =20 Error: Package: ovirt-engine-backend-3.5.4.2-1.el7.centos.noarch (@ovirt-3.5) Requires: vdsm-jsonrpc-java < 1.1.0 Removing: vdsm-jsonrpc-java-1.0.15-1.el7.noarch (@ovirt-3.5) vdsm-jsonrpc-java =3D 1.0.15-1.el7 Updated By: vdsm-jsonrpc-java-1.1.5-1.el7.centos.noarch (ovirt-3.6) vdsm-jsonrpc-java =3D 1.1.5-1.el7.centos Available: vdsm-jsonrpc-java-1.0.14-1.el7.noarch (ovirt-3.5) vdsm-jsonrpc-java =3D 1.0.14-1.el7 Available: vdsm-jsonrpc-java-1.1.1-0.0.master.20150430093147.git6efacdc.el7.noarch (ovirt-3.6) vdsm-jsonrpc-java =3D 1.1.1-0.0.master.20150430093147.git6efacdc.el7 Available: vdsm-jsonrpc-java-1.1.2-0.0.master.20150617081704.git4d4207f.el7.noarch (ovirt-3.6) vdsm-jsonrpc-java =3D 1.1.2-0.0.master.20150617081704.git4d4207f.el7 Available: vdsm-jsonrpc-java-1.1.3-0.0.master.20150701140902.giteb3f88c.el7.noarch (ovirt-3.6) vdsm-jsonrpc-java =3D 1.1.3-0.0.master.20150701140902.giteb3f88c.el7 Available: vdsm-jsonrpc-java-1.1.4-0.0.master.20150724142738.gitda84cc7.el7.noarch (ovirt-3.6) vdsm-jsonrpc-java =3D 1.1.4-0.0.master.20150724142738.gitda84cc7.el7 ------=_NextPart_000_011D_01D1077C.4FC73710 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" = xmlns:o=3D"urn:schemas-microsoft-com:office:office" = xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" = xmlns=3D"http://www.w3.org/TR/REC-html40"><head><meta = http-equiv=3DContent-Type content=3D"text/html; = charset=3Diso-8859-1"><meta name=3DGenerator content=3D"Microsoft Word = 14 (filtered medium)"><style></style></head><body lang=3DDE-AT link=3Dblue = vlink=3Dpurple><div class=3DWordSection1>I=B4m getting the below Dependency Error on an AIO UPG from = 3.5 to 3.6, any ideas how to fix it? <o:p></o:p><o:p> </o:p>Error: Package: = ovirt-engine-backend-3.5.4.2-1.el7.centos.noarch = (@ovirt-3.5)<o:p></o:p>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 Requires: vdsm-jsonrpc-java = < 1.1.0<o:p></o:p>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 Removing: = vdsm-jsonrpc-java-1.0.15-1.el7.noarch = (@ovirt-3.5)<o:p></o:p>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 = vdsm-jsonrpc-java =3D 1.0.15-1.el7<o:p></o:p>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 = Updated By: vdsm-jsonrpc-java-1.1.5-1.el7.centos.noarch = (ovirt-3.6)<o:p></o:p>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 = vdsm-jsonrpc-java =3D 1.1.5-1.el7.centos<o:p></o:p>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 = Available: vdsm-jsonrpc-java-1.0.14-1.el7.noarch = (ovirt-3.5)<o:p></o:p>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 = vdsm-jsonrpc-java =3D 1.0.14-1.el7<o:p></o:p>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 = Available: = vdsm-jsonrpc-java-1.1.1-0.0.master.20150430093147.git6efacdc.el7.noarch = (ovirt-3.6)<o:p></o:p>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 = vdsm-jsonrpc-java =3D = 1.1.1-0.0.master.20150430093147.git6efacdc.el7<o:p></o:p>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 = Available: = vdsm-jsonrpc-java-1.1.2-0.0.master.20150617081704.git4d4207f.el7.noarch = (ovirt-3.6)<o:p></o:p>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 = =A0=A0vdsm-jsonrpc-java =3D = 1.1.2-0.0.master.20150617081704.git4d4207f.el7<o:p></o:p>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 = Available: = vdsm-jsonrpc-java-1.1.3-0.0.master.20150701140902.giteb3f88c.el7.noarch = (ovirt-3.6)<o:p></o:p>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 = vdsm-jsonrpc-java =3D = 1.1.3-0.0.master.20150701140902.giteb3f88c.el7<o:p></o:p>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 = Available: = vdsm-jsonrpc-java-1.1.4-0.0.master.20150724142738.gitda84cc7.el7.noarch = (ovirt-3.6)<o:p></o:p>=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 = vdsm-jsonrpc-java =3D = 1.1.4-0.0.master.20150724142738.gitda84cc7.el7<o:p></o:p></div></body= ></html> ------=_NextPart_000_011D_01D1077C.4FC73710--

1 0

[ANN] oVirt 3.6.0 Second Release Candidate is now available for testing
by Sandro Bonazzola 15 Oct '15

15 Oct '15

The oVirt Project is pleased to announce the availability of the Second Release Candidate of oVirt 3.6 for testing, as of October 15th, 2015. This release is available now for Fedora 22, Red Hat Enterprise Linux 6.7, CentOS Linux 6.7 (or similar) and Red Hat Enterprise Linux 7.1, CentOS Linux 7.1 (or similar). This release supports Hypervisor Hosts running Red Hat Enterprise Linux 7.1, CentOS Linux 7.1 (or similar), Fedora 21 and Fedora 22. Highly experimental support for Debian 8.1 Jessie has been added too. This release of oVirt 3.6.0 includes numerous bug fixes. See the release notes [1] for an initial list of the new features and bugs fixed. Please refer to release notes [1] for Installation / Upgrade instructions. New oVirt Node ISO and oVirt Live ISO will be available soon as well[2]. Please note that mirrors[3] may need usually one day before being synchronized. Please refer to the release notes for known issues in this release. [1] http://www.ovirt.org/OVirt_3.6_Release_Notes [2] http://plain.resources.ovirt.org/pub/ovirt-3.6-pre/iso/ [3] http://www.ovirt.org/Repository_mirrorsCurrent_mirrors -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 0

Backup / Export Storage
by Soeren Malchow 15 Oct '15

15 Oct '15

--_000_4DE6BB4567504CC78BFEA6EF38855C66mcongroupcom_ Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: base64 RGVhciBhbGwsDQoNCldlIGhhdmUgYSBsYXJnZSBhbW91bnQgb2YgVm1zIGluIHRoZSBiYWNrdXAv ZXhwb3J0IHN0b3JhZ2UsIGJhc2ljYWxseSBldmVyeSBvZiB0aGUgYXBwcm94IDUwIG1hY2hpbmVz IGluIGFwcHJveCAyMC0zMCBnZW5lcmF0aW9ucywgdGhlIGxpc3RpbmcgKGluIFZNIEltcG9ydCBU YWIgb2YgdGhlIHN0b3JhZ2UpIHdhcyBhbHdheXMgdmVyeSBzbG93LCBidXQgbm93IGkgZ2V0IGFu IGVycm9yIOKAkyBhbSBzbWFsbCBwb3B1cCB3aXRoIGEgNTAyLg0KDQpJIGNhbiBub3QgZXZlbiBk ZWxldGUgVm1zIHRvIG1ha2UgdGhlIHN0b3JhZ2Ugc21hbGxlciBhZ2Fpbi4NCg0KUmVnYXJkaW5n IHRoaXMgaSBoYXZlIGEgZmV3IHF1ZXN0aW9ucw0KDQogIDEuICBIb3cgZG8gaSByZWR1Y2UgdGhl IGFtb3VudCBvZiBWTVMgc28gdGhhdCBpIGNhbiBhY2Nlc3MgdGhlIFZNIEltcG9ydCBhZ2FpbiA/ IENhbiBpIGp1c3QgZGVsZXRlIG9uIHN0b3JhZ2UgbGV2ZWwgPw0KICAyLiAgSXMgdGhlcmUgYW55 dGhpbmcgaSBjYW4gZG8gdG8gc3BlZWQgdXAgdGhlIGxpc3RpbmcNCiAgMy4gIERvZXMgYW55b25l IGhhdmUgYW4gaWRlYSBob3cgdG8gZXhwb3J0IHRoZSBleHBvcnRlZCAoeWVzIDotKSApIFZNUyB0 byBhbm90aGVyIHN0b3JhZ2UgaW4gYSB3YXkgdGhhdCB0aGV5IGNhbiBiZSBhY2Nlc3NlZCBhbmQg cmVpbXBvcnRlZCBpZiBuZWNlc3NhcnksIGFzIGZhciBhcyBpIGtub3cgdGhlIG1hY2hpbmVzIGFy ZSBhbHJlYWR5IG92ZiBmb3JtYXRzLCBpIHdvdWxkIG9ubHkgbmVlZCB0byBnZXQgdGhlIG5hbWUg Zm9yIGVhY2ggbWFjaGluZSBhbmQgd3JpdGUgaXQgc29tZWh3ZXJlIGVsc2UsIHN1Z2dlc3Rpb25z ID8NCg0KQ2hlZXJzDQpTb2VyZW4NCg== --_000_4DE6BB4567504CC78BFEA6EF38855C66mcongroupcom_ Content-Type: text/html; charset="utf-8" Content-ID: <EEDA9A26D75F374F900DE89D20E637D5(a)mcon-group.directory> Content-Transfer-Encoding: base64 PGh0bWw+DQo8aGVhZD4NCjxtZXRhIGh0dHAtZXF1aXY9IkNvbnRlbnQtVHlwZSIgY29udGVudD0i dGV4dC9odG1sOyBjaGFyc2V0PXV0Zi04Ij4NCjwvaGVhZD4NCjxib2R5IHN0eWxlPSJ3b3JkLXdy YXA6IGJyZWFrLXdvcmQ7IC13ZWJraXQtbmJzcC1tb2RlOiBzcGFjZTsgLXdlYmtpdC1saW5lLWJy ZWFrOiBhZnRlci13aGl0ZS1zcGFjZTsgY29sb3I6IHJnYigwLCAwLCAwKTsgZm9udC1zaXplOiAx NHB4OyBmb250LWZhbWlseTogQ2FsaWJyaSwgc2Fucy1zZXJpZjsiPg0KPGRpdj4NCjxkaXY+DQo8 ZGl2PkRlYXIgYWxsLDwvZGl2Pg0KPGRpdj48YnI+DQo8L2Rpdj4NCjxkaXY+V2UgaGF2ZSBhIGxh cmdlIGFtb3VudCBvZiBWbXMgaW4gdGhlIGJhY2t1cC9leHBvcnQgc3RvcmFnZSwgYmFzaWNhbGx5 IGV2ZXJ5IG9mIHRoZSBhcHByb3ggNTAgbWFjaGluZXMgaW4gYXBwcm94IDIwLTMwIGdlbmVyYXRp b25zLCB0aGUgbGlzdGluZyAoaW4gVk0gSW1wb3J0IFRhYiBvZiB0aGUgc3RvcmFnZSkgd2FzIGFs d2F5cyB2ZXJ5IHNsb3csIGJ1dCBub3cgaSBnZXQgYW4gZXJyb3Ig4oCTIGFtIHNtYWxsIHBvcHVw IHdpdGggYSA1MDIuPC9kaXY+DQo8ZGl2Pjxicj4NCjwvZGl2Pg0KPGRpdj5JIGNhbiBub3QgZXZl biBkZWxldGUgVm1zIHRvIG1ha2UgdGhlIHN0b3JhZ2Ugc21hbGxlciBhZ2Fpbi48L2Rpdj4NCjxk aXY+PGJyPg0KPC9kaXY+DQo8ZGl2PlJlZ2FyZGluZyB0aGlzIGkgaGF2ZSBhIGZldyBxdWVzdGlv bnM8L2Rpdj4NCjxvbD4NCjxsaT5Ib3cgZG8gaSByZWR1Y2UgdGhlIGFtb3VudCBvZiBWTVMgc28g dGhhdCBpIGNhbiBhY2Nlc3MgdGhlIFZNIEltcG9ydCBhZ2FpbiA/IENhbiBpIGp1c3QgZGVsZXRl IG9uIHN0b3JhZ2UgbGV2ZWwgPzwvbGk+PGxpPklzIHRoZXJlIGFueXRoaW5nIGkgY2FuIGRvIHRv IHNwZWVkIHVwIHRoZSBsaXN0aW5nPC9saT48bGk+RG9lcyBhbnlvbmUgaGF2ZSBhbiBpZGVhIGhv dyB0byBleHBvcnQgdGhlIGV4cG9ydGVkICh5ZXMgOi0pICkgVk1TIHRvIGFub3RoZXIgc3RvcmFn ZSBpbiBhIHdheSB0aGF0IHRoZXkgY2FuIGJlIGFjY2Vzc2VkIGFuZCByZWltcG9ydGVkIGlmIG5l Y2Vzc2FyeSwgYXMgZmFyIGFzIGkga25vdyB0aGUgbWFjaGluZXMgYXJlIGFscmVhZHkgb3ZmIGZv cm1hdHMsIGkgd291bGQgb25seSBuZWVkIHRvIGdldCB0aGUgbmFtZSBmb3IgZWFjaCBtYWNoaW5l DQogYW5kIHdyaXRlIGl0IHNvbWVod2VyZSBlbHNlLCBzdWdnZXN0aW9ucyA/PC9saT48L29sPg0K PGRpdj5DaGVlcnM8L2Rpdj4NCjxkaXY+U29lcmVuICZuYnNwOzwvZGl2Pg0KPGRpdj4NCjxkaXYg aWQ9Ik1BQ19PVVRMT09LX1NJR05BVFVSRSI+PC9kaXY+DQo8L2Rpdj4NCjwvZGl2Pg0KPC9kaXY+ DQo8L2JvZHk+DQo8L2h0bWw+DQo= --_000_4DE6BB4567504CC78BFEA6EF38855C66mcongroupcom_--

1 0

Identify the vm name in storage
by Budur Nagaraju 14 Oct '15

14 Oct '15

HI how to identify the vm instance in storage ? is there any way to identify ? Thanks, Nagaraju

2 1

Re: [ovirt-users] Logical Networks with different MTUs
by Yevgeny Zaspitsky 14 Oct '15

14 Oct '15

Hello Cam, The problem you described seems to be similar to the described in https://bugzilla.redhat.com/show_bug.cgi?id=1242227. The mentioned bug was fixed in one of the recent oVirt builds. The updated Ovirt code allows to mix networks (regardless of them being VM or non-VM) on a single NIC with the following conditions: - not more than one non-VLAN network in conjunction with any number of VLANs - MTU of the VLAN networks have to be equal to that of a non-VLAN one if such exists So I'd advise you to update you oVirt to the latest build. Regards, Yevgeny On Tue, Oct 6, 2015 at 2:47 AM, Cam Wright <cwright(a)cuttingedge.com.au> wrote: > Hi, > > I've just started building an oVirt farm as a replacement for our > existing infrastructure and I'm having issues configuring multiple > VLAN bridges with different MTUs. > > When I try to add a logical network with a VLAN tag + VM Network + MTU > 9000 to a bonded interface on my host with only the ovirtmgmt network > (MTU 1500, default) it throws up an error message and won't let me > continue, error message below: > > Cannot setup Networks. The following Logical Networks do not have the > same MTU value: ovirtmgmt(default), > net_bne_vlan10(9000). > > Eventually, I will want to add more logical networks with the default > MTU, so setting the ovirtmgmt MTU to 9000 is unfortunately not going > to solve my issue. > > This is something I can do in vanilla Linux networking where I set the > 802.3ad bond to be MTU 9000 and configure two different bridges off > that interface to 1500 and 9000, however this does not seem to be > possible in the oVirt web interface. > > I've dug through the Administration guide and feature requests and > there doesn't seem to be anything there around using different MTU > values for different logical networks. > > Has anyone been able to successfully do this? The > /etc/sysconfig/network-scripts and /var/lib/vdsm/persistence/netconf > files seem to get rewritten whenever the vdsm service does anything, > so I'm reluctant to edit them manually. > > The hosts were built using the hosted-engine installer on Fedora 22. > The engine is running Fedora 22 also, see below: > > [root@bne-ovirtengine01 ~]# cat /etc/redhat-release > Fedora release 22 (Twenty Two) > [root@bne-ovirtengine01 ~]# uname -r > 4.0.4-301.fc22.x86_64 > > oVirt Engine Version: 3.6.0-1.fc22 > > Any assistance would be appreciated. > > Cam Wright | Systems Administrator > CUTTINGEDGE > 90 Victoria St, West End, Brisbane, QLD, 4101 > T +61 7 3013 6222 > E cwright(a)cuttingedge.com.au | W www.cuttingedge.com.au > > /SYD /BNE /MEL /TYO > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users >

1 0

Upgrading
by Fernando Fuentes 14 Oct '15

14 Oct '15

Is there a best practice when upgrading from ovirt 3.4 to 3.5? I upgraded my development server which is a self hosted server and I just did a regular update without putting anything under maintenance... Though my vm's where turned off. It all went well and the migration from krb/ldap to AAA went smoothly and so far is running like a champ. I am about to do the same to our production cluster and was wondering if I must put all Hosts under maintenance before I do the upgrade? Is it any different than a self hosted ovirt setup? Thanks in advance for all/any tips from the mailing list!

2 2

VM Network activity on ovirt UI
by Marc Seward 14 Oct '15

14 Oct '15

I'm generating network activity on a VM using iperf.The VM acts as an iperf client.On the client,iperf reports that data has been successfully sent to iperf server.The iperf server also shows that it's successfully receiving data from the iperf client.But,network is at 0% on the ovirt UI.The client and server are on different private networks. On the same VM,when I generate network activity by fetching a file from a public network using wget,the network column correctly shows activity on the ovirt UI for the VM. Could someone help me understand why I am unable to see network activity on the ovirt UI when iperf is used? Appreciate your help.TIA.

2 3

Any way to correlate a VM disk (e.g. /dev/vda) to the vdsm ovirt disk?
by ccox＠endlessnow.com 13 Oct '15

13 Oct '15

I want to correlate virtual disks back to their originating storage under ovirt. Is there any way to do this? e.g. (made up example) /dev/vda maps to ovirt disk disk1_vm serial 978e00a3-b4c9-4962-bc4f-ffc9267acdd8

5 7

engine.log is looping with Volume XXX contains a apparently corrupt brick(s).
by Nico 13 Oct '15

13 Oct '15

--=_96b09eee02d72544a4bd8a6df3818a5b Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset=US-ASCII Hi Recently, i built a small oVirt platform with 2 dedicated servers and GlusterFS to synch the VM storage. oVirt Setup is simple: ovirt01 : Host Agent (VDSM) + oVirt Engine ovirt02 : Host Agent (VDSM) Version : ovirt-release35-005-1.noarch ovirt-engine-3.5.4.2-1.el7.centos.noarch vdsm-4.16.26-0.el7.centos.x86_64 vdsm-gluster-4.16.26-0.el7.centos.noarch glusterfs-server-3.7.4-2.el7.x86_64 GlusterFS Setup is simple, 2 bricks in replicate mode. It was done in shell; not using oVirt GUI, and then it was added in STORAGE as a new DOMAIN; Type:DATA GlusterFS V3 # gluster volume info Volume Name: ovirt Type: Replicate Volume ID: 043d2d36-dc2c-4f75-9d28-96dbac25d07c Status: Started Number of Bricks: 1 x 2 = 2 Transport-type: tcp Bricks: Brick1: ovirt01:/gluster/ovirt Brick2: ovirt02:/gluster/ovirt Options Reconfigured: performance.readdir-ahead: on nfs.disable: true auth.allow: IP_A, IP_B network.ping-timeout: 10 storage.owner-uid: 36 storage.owner-gid: 36 server.allow-insecure: on the data are reachable on the 2 nodes through a moint point that oVirt created when i configured the Storage with the GUI: localhost:/ovirt 306G 216G 78G 74% /rhev/data-center/mnt/glusterSD/localhost:_ovirt I created 7 VM on this shared storage and all is working fine. I can do Live migration; all is working. But when i check /var/log/ovirt/engine.log on ovirt01, there are error in loop every 2 seconds: 2015-10-11 17:29:50,971 INFO [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand] (DefaultQuartzScheduler_Worker-29) [34dbe5cf] START, GlusterVolumesListVDSCommand(HostName = ovirt02, HostId = 65a5bb5d-721f-4a4b-9e77-c4b9162c0aa6), log id: 41443b77 2015-10-11 17:29:50,998 WARN [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListReturnForXmlRpc] (DefaultQuartzScheduler_Worker-29) [34dbe5cf] Could not add brick ovirt02:/gluster/ovirt to volume 043d2d36-dc2c-4f75-9d28-96dbac25d07c - server uuid 3c340e59-334f-4aa6-ad61-af2acaf3cad6 not found in cluster fb976d4f-de13-449b-93e8-600fcb59d4e6 2015-10-11 17:29:50,999 INFO [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand] (DefaultQuartzScheduler_Worker-29) [34dbe5cf] FINISH, GlusterVolumesListVDSCommand, return: {043d2d36-dc2c-4f75-9d28-96dbac25d07c=org.ovirt.engine.core.common.businessentities.gluster.GlusterVolumeEntity@200ae0d1}, log id: 41443b77 2015-10-11 17:29:51,001 WARN [org.ovirt.engine.core.bll.gluster.GlusterSyncJob] (DefaultQuartzScheduler_Worker-29) [34dbe5cf] Volume ovirt contains a apparently corrupt brick(s). Hence will not add it to engine at this point. I played a lot with oVirt at first it was running on a single node; in Local Datacenter; then i added a second node, move the first host to a new datacenter; migrated the images VM etc; with some pain at some very moment and now all looks fine but i prefer to double check. So, i want to know if there is a real issue with ovirt/gluster setup that i don't see, any info are welcome because i'm a bit worried to see these message in LOOP on the log. Thanks in advance; Regards Nico --=_96b09eee02d72544a4bd8a6df3818a5b Content-Transfer-Encoding: quoted-printable Content-Type: text/html; charset=UTF-8 <html><head><meta http-equiv=3D"Content-Type" content=3D"text/html; charset= =3DUTF-8" /></head><body style=3D'font-size: 10pt; font-family: Verdana,Gen= eva,sans-serif'> Hi   Recently, i built a small oVirt platform= with 2 dedicated servers and GlusterFS to synch the VM storage.</span= >   oVirt Setup is simple:   ovirt01 :  Host Agent (VDSM)  = + oVirt Engine  ovirt02 :  Host Agent (VDSM)=   Version :    ovirt-release35-005-1.noarch ovirt-engine-3.5.4.2-1.el7.centos.noarch= vdsm-4.16.26-0.el7.centos.x86_64<= /p> vdsm-gluster-4.16.26-0.el7.centos.noarch= glusterfs-server-3.7.4-2.el7.x86_64</spa= n>     GlusterFS Setup is simple, 2 bricks in r= eplicate mode. It  was done in shell; not using oV= irt GUI, and then it was added in STORAGE as a new DOMAIN; Type:DATA Gluste= rFS V3   # gluster volume info   Volume Name: ovirt Type: Replicate Volume ID: 043d2d36-dc2c-4f75-9d28-96dba= c25d07c Status: Started Number of Bricks: 1 x 2 =3D 2 Transport-type: tcp Bricks: Brick1: ovirt01:/gluster/ovirt</p= > Brick2: ovirt02:/gluster/ovirt</p= > Options Reconfigured: performance.readdir-ahead: on nfs.disable: true auth.allow: IP_A, IP_B network.ping-timeout: 10 storage.owner-uid: 36 storage.owner-gid: 36 server.allow-insecure: on     the data are reachable on the 2 nodes th= rough a moint point that oVirt created when i configured the Storage with t= he GUI:   localhost:/ovirt       &n= bsp;         306G    216G   78G  74= % /rhev/data-center/mnt/glusterSD/localhost:_ovirt   I created 7 VM on this shared storage an= d all is working fine. I can do Live migration; all is working.   But when i check /var/log/ovirt/engine= =2Elog on ovirt01, there are error in loop every 2 seconds:   2015-10-11 17:29:50,971 INFO  [org= =2Eovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand] (Defau= ltQuartzScheduler_Worker-29) [34dbe5cf] START, GlusterVolumesListVDSCommand= (HostName =3D ovirt02, HostId =3D 65a5bb5d-721f-4a4b-9e77-c4b9162c0aa6), lo= g id: 41443b77 2015-10-11 17:29:50,998 WARN  [org= =2Eovirt.engine.core.vdsbroker.gluster.GlusterVolumesListReturnForXmlRpc] (= DefaultQuartzScheduler_Worker-29) [34dbe5cf] Could not add brick ovirt02:/g= luster/ovirt to volume 043d2d36-dc2c-4f75-9d28-96dbac25d07c - server uuid 3= c340e59-334f-4aa6-ad61-af2acaf3cad6 not found in cluster fb976d4f-de13-449b= -93e8-600fcb59d4e6 2015-10-11 17:29:50,999 INFO  [org= =2Eovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand] (Defau= ltQuartzScheduler_Worker-29) [34dbe5cf] FINISH, GlusterVolumesListVDSComman= d, return: {043d2d36-dc2c-4f75-9d28-96dbac25d07c=3Dorg.ovirt.engine.core.co= mmon.businessentities.gluster.GlusterVolumeEntity@200ae0d1}, log id: 41443b= 77 2015-10-11 17:29:51,001 WARN  [org= =2Eovirt.engine.core.bll.gluster.GlusterSyncJob] (DefaultQuartzScheduler_Wo= rker-29) [34dbe5cf] Volume ovirt contains a apparently corrupt brick(s). He= nce will not add it to engine at this point.   I played a lot with oVirt at firs= t it was running on a single node; in Local Datacenter; then i added a seco= nd node, move the first host to a new datacenter; migrated the images VM et= c; with some pain at some very moment and now all looks fine but i prefer t= o double check. So, i want to know if there is a real is= sue with ovirt/gluster setup that i don’t see, any info are welcome b= ecause i’m a bit worried to see these message in LOOP on the log.</sp= an>   Thanks in advance;   Regards Nico <div> </div> </body></html> --=_96b09eee02d72544a4bd8a6df3818a5b--

3 6

live snapshot merge missing after vdsm update
by Roel de Rooy 13 Oct '15

13 Oct '15

--_000_DBXPR06MB544F4ED5888DED7D2252803C3300DBXPR06MB544eurprd_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hi all, 1 of our older clusters in use, consists of 2 nodes contain Fedora 20, with= the virt-preview repository enabled. The Engine itself is installed on a dedicated server (CentOS 6) and is stil= l on version 3.5.1.1-1.el6. During some maintenance a couple of days ago on the Fedora 20 nodes, also = the installed vdsm package was updated by the engineer working on the nodes= . We went from version 'vdsm-4.16.10-8.gitc937927.fc20' to 'vdsm-4.16.26-0.fc= 20'. This morning I wanted to remove some old snapshots on running vm's, only to= find out that the delete button is once again greyed out. I also created a new snapshot on a running vm to test if it would only happ= en on snapshots that were already there before the update, but the delete b= utton would still remain greyed out. Only turning off the vm allows me to use the delete button. When looking at the nodes within the cluster, they both still have Live Sna= pshot Support on Active. Before the vdsm update, the live merge functionality worked perfectly. Anybody experienced something similar? Could It be because the Engine is still running on 3.5.1? We are also running 2 clusters with F21 nodes that have the same vdsm versi= on nummer installed and they don't have an issue at all; connected to the s= ame engine. Kind Regards, Roel --_000_DBXPR06MB544F4ED5888DED7D2252803C3300DBXPR06MB544eurprd_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <meta name=3D"Generator" content=3D"Microsoft Word 15 (filtered medium)"> <style></style> </head> <body lang=3D"NL" link=3D"#0563C1" vlink=3D"#954F72"> <div class=3D"WordSection1"> Hi all,<o:p></o:p> <o:p> </o:p> 1 of our older clusters in use,= consists of 2 nodes contain Fedora 20, with the virt-preview repository en= abled.<o:p></o:p> The Engine itself is installed = on a dedicated server (CentOS 6) and is still on version 3.5.1.1-1.el6.<o:p= ></o:p> <o:p> </o:p> During some maintenance a coupl= e of days ago on the Fedora 20  nodes, also the installed vdsm package= was updated by the engineer working on the nodes.<o:p></o:p> We went from version ‘vds= m-4.16.10-8.gitc937927.fc20’ to ‘vdsm-4.16.26-0.fc20’.<o:= p></o:p> <o:p> </o:p> This morning I wanted to remove= some old snapshots on running vm’s, only to find out that the delete= button is once again greyed out.<o:p></o:p> I also created a new snapshot o= n a running vm to test if it would only happen on snapshots that were alrea= dy there before the update, but the delete button would still remain greyed= out.<o:p></o:p> Only turning off the vm allows = me to use the delete button. <o:p></o:p> <o:p> </o:p> When looking at the nodes withi= n the cluster, they both still have Live Snapshot Support on Active.<o:p></= o:p> Before the vdsm update, the liv= e merge functionality worked perfectly.<o:p></o:p> <o:p> </o:p> Anybody experienced something s= imilar?<o:p></o:p> Could It be because the Engine = is still running on 3.5.1?<o:p></o:p> We are also running 2 clusters = with F21 nodes that have the same vdsm version nummer installed and they do= n’t have an issue at all; connected to the same engine.<o:p></o:p></s= pan> <o:p> </o:p> <o:p></o:p> Kind Regards,<o:p></o:p>= Roel<o:p></o:p> </div> </body> </html> --_000_DBXPR06MB544F4ED5888DED7D2252803C3300DBXPR06MB544eurprd_--

2 1

Support for windows10
by Budur Nagaraju 13 Oct '15

13 Oct '15

Hi Does Ovirt supports windows 10 OS ? Thanks, Nagaraju

5 18

oVirt Engine redundant ?
by Nico 13 Oct '15

13 Oct '15

--=_b5ae4dd5edb7f3efcaaf1d71e197ef06 Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset=US-ASCII Hello I got a question regarding the redundancy of oVirt Engine; where we can control everything through the GUI; aka the vCenter. Initially; my setup was on a single server; installed following the doc AllinOne. Then after; i figured out that i would need redundancy; so i installed a second node. my question is about the vCenter; is it possible to start it on the second node when the first node is down or in maintenance ? how to ensure it is replicated ? i see there is a postgres DB on first node; but not on second node. I'm a bit worried. So, is it possible to have a dormant/slave ovirt ENGINE (oVirt web GUI ) ; and if yes, could you point me to the related documentation as i didn't find it. Maybe, it is possible to run it in a VM ? is it a good idea ? and is it still possible to migrate ? Thanks a lot; Regards Nico --=_b5ae4dd5edb7f3efcaaf1d71e197ef06 Content-Transfer-Encoding: quoted-printable Content-Type: text/html; charset=UTF-8 <html><head><meta http-equiv=3D"Content-Type" content=3D"text/html; charset= =3DUTF-8" /></head><body style=3D'font-size: 10pt; font-family: Verdana,Gen= eva,sans-serif'> Hello I got a question regarding the redundancy of oVirt Engine; where we can = control everything through the GUI; aka the vCenter. Initially; my setup was on a single server; installed following the doc = AllinOne. Then after; i figured out that i would need redundancy; so i installed a= second node. my question is about the vCenter; is it possible to start it on the seco= nd node when the first node is down or in maintenance ? how to ensure it is= replicated ? i see there is a postgres DB on first node; but not on second= node. I'm a bit worried. So, is it possible to have a dormant/slave ovirt ENGINE (oVirt web = GUI ) ; and if yes, could you point me to the related documentation as i di= dn't find it. Maybe, it is possible to run it in a VM ? is it a good idea ? and is it = still possible to migrate ? Thanks a lot; Regards Nico   <div> </div> </body></html> --=_b5ae4dd5edb7f3efcaaf1d71e197ef06--

4 10

vm cannot be started
by qinglong.dong＠horebdata.cn 13 Oct '15

13 Oct '15

This is a multi-part message in MIME format. ------=_001_NextPart743821046535_=---- Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: base64 SGkgYWxsLA0KICAgICAgICBJIGhhdmUgaW5zdGFsbGVkIG92aXJ0LWhvc3RlZC1lbmdpbmUtc2V0 dXAgb24gb25lIG1hY2hpbmUgYW5kIGl0IHVzZWQgaXNjc2kgc2hhcmVkIHN0b3JhZ2Ugb24gYW5v dGhlciBtYWNoaW5lLiBJIGNyZWF0ZWQgYW5kIHNlYWxlZCBhIHdpbmRvd3MgeHAgdGVtcGxhdGUg YW5kIHRoZW4gSSBjcmVhdGVkIGEgdm0gYmFzZWQgb24gdGhlIHRlbXBsYXRlLiBXaGVuIHRoZSB2 bSB3YXMgc3RhcnRlZCBhdCB0aGUgZmlyc3QgdGltZSBJIGF0dGFjaGVkIHRoZSBmbG9wcHkgdG8g aXQgYW5kIHVzZSBzeXNwcmVwIHRvIGluaXQgaXQuIFRoZW4gSSBzaHV0ZG93biB0aGUgdm0sIGJ1 dCBhZnRlciBJIHNodXRkb3duIGl0IEkgY2Fubm90IHN0YXJ0IGl0LiBIZXJlIGFyZSB0aGUgbG9n czoNCiAgICAgICAgVk0gdGVzdCBpcyBkb3duIHdpdGggZXJyb3IuIEV4aXQgbWVzc2FnZTogaW50 ZXJuYWwgZXJyb3IgUHJvY2VzcyBleGl0ZWQgd2hpbGUgcmVhZGluZyBjb25zb2xlIGxvZyBvdXRw dXQ6IGNoYXIgZGV2aWNlIHJlZGlyZWN0ZWQgdG8gL2Rldi9wdHMvMQ0KMjAxNS0wOS0yNVQwMToy OTozMS4yMjIwMjhaIHFlbXUta3ZtOiAtZHJpdmUgZmlsZT0vdmFyL3J1bi92ZHNtL3BheWxvYWQv NmJlNzI2NjQtYTgwYy00ZDc4LTlhNWItZjJiYmUzN2M1YjJlLjRlYmYyNGMzM2Y2MTExZTBkYWUy MDQ2NmYzNzBkZTUzLmltZyxpZj1ub25lLGlkPWRyaXZlLWZkYzAtMC0wLGZvcm1hdD1yYXcsc2Vy aWFsPTogY291bGQgbm90IG9wZW4gZGlzayBpbWFnZSAvdmFyL3J1bi92ZHNtL3BheWxvYWQvNmJl NzI2NjQtYTgwYy00ZDc4LTlhNWItZjJiYmUzN2M1YjJlLjRlYmYyNGMzM2Y2MTExZTBkYWUyMDQ2 NmYzNzBkZTUzLmltZzogUGVybWlzc2lvbiBkZW5pZWQuDQogICAgICAgIEFueW9uZSBjYW4gaGVs cD8gVGhhbmtzIQ0KDQoNCkRvbG55DQo= ------=_001_NextPart743821046535_=---- Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html><head><meta http-equiv=3D"content-type" content=3D"text/html; charse= t=3Dus-ascii"><style>body { line-height: 1.5; }body { font-size: 10.5pt; f= ont-family: ????; color: rgb(0, 0, 0); line-height: 1.5; }</style></head><= body>=0A<div>Hi all,</div><div><span style=3D"font-family: "" helvetica= =3D"" neue',=3D"" arial,=3D"" sans-serif";=3D"" font-size:=3D"" 15px;=3D""= color:=3D"" rgb(34,=3D"" 34,=3D"" 34);=3D"" background-color:=3D"" rgb(19= 9,=3D"" 237,=3D"" 204);=3D"" font-weight:=3D"" normal;=3D"" font-style:=3D= "" normal;text-decoration:=3D"" none;'=3D"">    <spa= n style=3D"font-size: 10.5pt; line-height: 1.5; background-color: window;"= >    I have installed ovirt-hosted-engine-setup on one machine a= nd it used iscsi shared storage on another machine. I created and sealed a= windows xp template and then I created a vm based on the template. When t= he vm was started at the first time I attached the floppy to it and use sy= sprep to init it. Then I shutdown the vm, but after I shutdown it I cannot= start it. Here are the logs:</div><div>    &nb= sp;   VM test is down with = error. Exit message: internal error Process = exited while reading console log output: cha= r device redirected to /dev/pts/1</div>2015-09-= 25T01:29:31.222028Z qemu-kvm: -drive file=3D/var/run/vdsm/p= ayload/6be72664-a80c-4d78-9a5b-f2bbe37c5b2e.4ebf24c33f6111e0dae20466f370de= 53.img,if=3Dnone,id=3Ddrive-fdc0-0-0,format=3Draw,serial=3D: could&nb= sp;not open disk image /var/run/vdsm/payload/6be72664-= a80c-4d78-9a5b-f2bbe37c5b2e.4ebf24c33f6111e0dae20466f370de53.img: Per= mission denied.<div>        Anyone can help? Than= ks! <hr style=3D"width: 210px; height: 1px;" color=3D"#b5c4df" size=3D"= 1" align=3D"left">=0A<div>Dolny</div>=0A</div></body></html> ------=_001_NextPart743821046535_=------

2 1

Migrate VM to new cluster
by Kevin COUSIN 12 Oct '15

12 Oct '15

Hi list, Hi upgrade my nodes from CentOS 6 to CentOS 7. I create a new cluster, but how can I migrate all my VM to the new cluster ? Thanks a lot ------------------------ Kevin

2 2

Best practice
by Fernando Fuentes 12 Oct '15

12 Oct '15

Is there a best practice when upgrading from ovirt 3.4 to 3.5? I upgraded my development server which is a self hosted server and I just did a regular update without putting anything under maintenance... Though my vm's where turned off. The migration from krb/ldap to AAA went smoothly and so far is running like a champ. I am about to do the same to our production cluster and was wondering if I must put all Hosts under maintenance before I do the upgrade? Thanks in advance for all/any tips from the mailing list! Regards, -- Fernando Fuentes Supervisor & Senior Systems Administrator Email: ffuentes(a)aasteel.com American Alloy Steel, Inc. Houston, Texas Website: http://www.aasteel.com Phone: 713-744-4222 Fax: 713-300-5688

1 0

upgrade path from Ovirt 3.5x to 3.6x
by Andrea Ghelardi 12 Oct '15

12 Oct '15

Hallo, I needed a quick confirmation on this subject. Our environment is Ovirt 3.511 (yes, I’ll upgrade soon, I know) running on a Centos 6.6 hosted engine VM on a cluster of Centos 6.6 physical servers. Since Ovirt 3.6x will be compatible with Centos 7 hypervisor only, how I’m supposed to upgrade hosted engine, VM and HOSTs? i.e. readme tells us the well known procedure (put hosted eng in maintenance, upgrade, etc) but I will eventually end in a scenario where my hosted engine 3.6 will run on centos 7 VM running (on) a lot of centos 6.6 servers... Please tell me I have not to create a totally different datacenter and export -> import all VMs... Thank you! Andrea Ghelardi

2 2

ovirt repos dependencies
by Nathanaël Blanchet 12 Oct '15

12 Oct '15

Hello, I tried to install a single host with a custom repo synced by my own from official ovirt, gluster repos etc... (with katello). But installation always fail because otopi can't locate gluster packages, while those packages are available and can be yum installed on the host. So, what does otopi require more than gluster repo for a successfull installation? This limitation prevents from anyone to install a host from an other repo than official ones (in my case, using a katello subscription) -- Nathanaël Blanchet Supervision réseau Pôle Infrastrutures Informatiques 227 avenue Professeur-Jean-Louis-Viala 34193 MONTPELLIER CEDEX 5 Tél. 33 (0)4 67 54 84 55 Fax 33 (0)4 67 54 84 14 blanchet(a)abes.fr

1 0

ovirt repository in the foreman host provisionning process
by Nathanaël Blanchet 12 Oct '15

12 Oct '15

Hello, In the foreman host provisionning process, should the "yum localinstall http://resources.ovirt.org/pub/yum-repo/ovirt-release35.rpm" be automatically executed in the same way as it is in a traditional way? it seems that whithout those repos, vdsm installation fails, even if the host had been previously registered with katello to a local ovirt repository. Could you please help me on that point? -- Nathanaël Blanchet Supervision réseau Pôle Infrastrutures Informatiques 227 avenue Professeur-Jean-Louis-Viala 34193 MONTPELLIER CEDEX 5 Tél. 33 (0)4 67 54 84 55 Fax 33 (0)4 67 54 84 14 blanchet(a)abes.fr

1 0

Collectd with Ovirt
by Punit Dambiwal 12 Oct '15

12 Oct '15

Hi All, I want to use collectd (https://collectd.org/) to collect the guest VM usages in to graphs...as ovirt DWH and reports are not quite good...i want more good graphs and reporting of the usages... Please suggest me good way or tool to achieve this... Thanks, Punit

3 5

Re: [ovirt-users] Unable to import hosted engine storage domain in 3.6RC with FC storage
by Elad Ben Aharon 11 Oct '15

11 Oct '15

Hi Christopher, Thanks for raising the issue. It sounds like the issue you are referring to is related to the fix of https://bugzilla.redhat.com/show_bug.cgi?id=1261996 . Adding some more people who should be involved. On Sun, Oct 11, 2015 at 10:49 AM, Elad Ben Aharon <ebenahar(a)redhat.com> wrote: > Hi Christopher, > > Thanks for raising the issue. It sounds like the issue you are referring > to is related to the fix of > https://bugzilla.redhat.com/show_bug.cgi?id=1261996. > Adding some more people who should be involved. > > On Fri, Oct 9, 2015 at 9:42 PM, Christopher Miersma <miersma(a)ualberta.ca> > wrote: > >> Hi All, >> >> I'm having an issue with the current release candidate for 3.6, running >> on CentOS 7. I'm trying to install the hosted engine on fibre channel >> storage. I can successfully install the VM, and get everything up and >> running, but the hosted engine VM itself does not appear in the web >> interface, nor does the storage domain on which the hosted engine's disks >> reside appear. When I create a new storage domain on the SAN, I can see the >> LUN on which the hosted engine resides, but it is greyed out. When I first >> started the cluster and got the host and engine VM installed and running, >> it gave me the message " The Hosted Engine Storage Domain doesn't exist. It >> shoudl be imported into the setup." I've tried importing and attaching the >> storage domain, but it simply doesn't appear in the interface to allow me >> to import it. I've tired every Attach/Import/Activate screen that I could >> find. I've also opened a bug report ( >> https://bugzilla.redhat.com/show_bug.cgi?id=1267337) but with no >> success so far. >> >> Has anyone else had a similar issue? Can you import the hosted engine >> storage domain after setup, and if so on what kind of storage? From some of >> the posts I've seen, it looks like people are getting it to work with NFS >> and maybe iSCSI, but I haven't seen anyone else mention Fibre Channel. >> >> Christopher Miersma >> _______________________________________________ >> Users mailing list >> Users(a)ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> > >

1 0

oVirt Community Newsletter: September 2015
by Mikey Ariel 09 Oct '15

09 Oct '15

There was a lot of activity in the oVirt community this September, with so many talks and presentations given to the community at large, you'll have hours to watch this month! Videos, though, aren't the only thing happening in the oVirt Community this past month. Check out our newsletter to learn more: ----------------- Software Releases ----------------- oVirt 3.5.4 Final Released http://www.ovirt.org/OVirt_3.5.4_Release_Notes oVirt 3.5.5 Second Release Candidate is now available for testing http://lists.ovirt.org/pipermail/announce/2015-September/000196.html oVirt 3.6.0 First Release Candidate is now available for testing http://lists.ovirt.org/pipermail/announce/2015-September/000197.html moVirt is Currently Available in the Google Play Store https://play.google.com/store/apps/details?id=org.ovirt.mobile.movirt ---------------- In the Community ---------------- Welcome to the New oVirt Community Lead http://red.ht/1Ksb0yd Event Report--LinuxCon NA 2015 http://community.redhat.com/blog/2015/09/event-report-linuxcon-na-2015/ QEMU Maintainers on the 2.4 Release http://bit.ly/1Pka0OZ Event Report--LinuxCon NA 2015 http://community.redhat.com/blog/2015/09/event-report-linuxcon-na-2015/ Examining IT Infrastructure (including oVirt) [Italian] http://bit.ly/1Pk9OPJ Importing KVM guests to oVirt or RHEV http://bit.ly/1PkaDYD RHEV: How to Import a VMware ESXi OVA Disk Image into RHEV-M http://fatmin.com/2015/09/14/rhev-how-to-import-a-vmware-esxi-ova-disk-imag… Nested KVM virtualization with RHEV http://www.willberg.fi/2015/08/nested-kvm-virtualization-with-rhev.html Manage VM snapshots in RHEV/oVirt with ManageIQ http://www.jung-christian.de/2015/06/manage-vm-snapshots-in-rhevovirt-with-… How to import existing VM from virsh to ovirt http://arm2armcos.blogspot.com/2015/09/how-to-import-exising-vm-from-virsh-… Migrating from cPanel to a cheap “private cloud” – Part 1 http://hasaninter.net/2015/09/12/migrating-from-cpanel-to-a-cheap-private-c… Create an oVirt Cluster Node First, Engine Later http://serverfault.com/questions/725476/create-an-ovirt-cluster-node-first-… Installing oVirt 3.5.3 All in One on my fitlet-x http://1337.tips/installing-ovirt-3-5-3-all-in-one-on-my-fitlet-x/ Get the most out of oVirt with moVirt app https://www.udsenterprise.com/en/blog/2015/09/10/get-most-out-ovirt-movirt-… ------------------------------------ Deep Dives and Technical Discussions ------------------------------------ moVirt Deep Dive https://youtu.be/6w9t1wxNKBE (Video) oVirt Tutorial Series, Part 1: Enable Nested KVM https://youtu.be/MJCo9zzJdrg (Video) oVirt Tutorial Series, Part 2: Download and Install QEMU https://youtu.be/gHZx0aEUZf8 (Video) oVirt Tutorial Series, Part 3: Set Fixed IP, FQDN and oVirt Download Engine https://youtu.be/yKSrRSJvarc (Video) oVirt Tutorial Series, Part 4: Creating NFS Share https://youtu.be/WCyJJA10-rY (Video) oVirt Tutorial Series, Part 5: Set oVirt Engine https://youtu.be/PVhdbPZYflc (Video) oVirt Tutorial Series, Part 6: Download, Create VM and Install oVirt Node https://youtu.be/r4xNaLQH1jU (Video) oVirt Tutorial Series, Part 7: Set oVirt Node https://youtu.be/6S_B5cvAtjU (Video) oVirt Tutorial Series, Part 8: Add Node and Shared Folder to Engine https://youtu.be/tu0JoufSY_8 (Video) oVirt Tutorial Series, Part 9: Add Shared Folder to ISO Files https://youtu.be/OeqYvNqDIEU (Video) oVirt Tutorial Series, Part 10: Create VM Within the oVirt and Install SPICE https://youtu.be/Pl4OArmSko8 (Video) oVirt 3.6 Deep Dive: Host Device Passthrough - Host View https://youtu.be/Iog6J5WtWdg (Video) oVirt 3.6 Deep Dive: Host Device Passthrough - VM View https://youtu.be/WIo2NR2NvX4 (Video) oVirt Deep Dive: oVirt Katello/Satellite Integration https://youtu.be/H4M9B_z2FTs (Video) oVirt 3.6 Deep Dive: AAA - Local User Management https://youtu.be/CUsaqLQIkuQ (Video) oVirt 3.6 Deep Dive: Power Management UI Changes https://youtu.be/AkfAMpEykdU (Video) oVirt 3.6 Deep Dive: Storage - LUN resize https://youtu.be/VxvurM-8n5s (Video) oVirt 3.6 Deep Dive: 'Console in use' feature https://youtu.be/U0v1Q8Rrxww (Video) -- Mikey Ariel Community Lead, oVirt www.ovirt.org "To be is to do" (Socrates) "To do is to be" (Jean-Paul Sartre) "Do be do be do" (Frank Sinatra) IRC: ThatDocsLady Twitter: @ThatDocsLady

1 0

Get Involved in oVirt Project! October edition
by Sandro Bonazzola 09 Oct '15

09 Oct '15

Hi, Have you got some free time and do you want to get involved in oVirt project? Do you like the idea of having fresh disk images of recent distribution in oVirt Glance repository? You can help us by testing existing online images ensuring they works with cloud-init or creating one yourself and report your success to devel(a)ovirt.org. We'll be happy to upload the images once these are ready. Do you like Debian and do you have some programming skill? Help us getting VDSM running on it! We started releasing highly experimental packages and it's a good time for giving them a try. You can follow the progress here: http://www.ovirt.org/VDSM_on_Debian Here are some bugs you can try to help with: Bug ID Status Whiteboard Target Milestone Summary 1120588 NEW docs ovirt-3.6.0-rc update log collector documentation 1120585 NEW docs ovirt-3.6.0-rc update image uploader documentation 1120586 NEW docs ovirt-3.6.0-rc update iso uploader documentation 1159784 NEW docs --- [RFE] Document when and where new features are available when upgrading cluster / datacenters 1174285 NEW i18n ovirt-3.6.0-rc [de-DE] "Live Snapshot Support" reads "Live Snapsnot Support" 1074301 NEW infra ovirt-4.0.0 [RFE] ovirt-shell has no man page 1227019 NEW integration ovirt-3.6.1 Require sos >= 3.3 when available - ovirt sosreport plugin doesn't obfuscate password used in aaa extensions 1237132 NEW integration ovirt-3.6.1 [TEXT] New package listing of engine-setup when upgrading packages is not user friendly 1156060 NEW integration ovirt-3.6.1 [text] engine admin password prompt consistency 1251965 NEW integration ovirt-3.6.1 Appliance based setup should default to using /var/tmp for unpacking the image 1065350 POST integration ovirt-3.6.1 hosted-engine should prompt a question at the user when the host was already a host in the engine 1083104 NEW integration ovirt-4.0.0 engine-setup --offline does not update versionlock 1269182 POST integration ovirt-3.6.1 hosted-engine accepts FQDNs with underscore while the engine correctly fails on that 1234257 NEW integration ovirt-3.5.6 Test engine upgrade path from EL6 with oVirt 3.5.z to EL7 1059952 POST integration ovirt-3.6.1 hosted-engine --deploy (additional host) will fail if the engine is not using the default self-signed CA 1247068 POST integration ovirt-3.6.1 [TEXT] Warn the administrator that CD/DVD passthrough is disabled for RHEL7 1115059 ASSIGNED network ovirt-3.6.0-ga Incomplete error message when adding VNIC profile to running VM 772931 NEW reports --- [RFE] Reports should include the name of the oVirt engine Are you great at packaging software? Do you prefer a distribution which is currently unsupported by oVirt? Do you want to have packages included in your preferred distribution? Help getting oVirt ported there! Fedora: http://lists.ovirt.org/pipermail/devel/2015-September/011426.html CentOS: https://wiki.centos.org/SpecialInterestGroup/Virtualization Gentoo: https://wiki.gentoo.org/wiki/OVirt Debian Jessie: http://www.ovirt.org/Features/Debian_support_for_hosts Archlinux: http://www.ovirt.org/OVirt_on_Arch_Linux OpenSUSE: https://build.opensuse.org/project/show/Virtualization:oVirt Do you love "DevOps?", you count stable builds in jenkins ci while trying to fall a sleep? Then oVirt infra team is looking for you!, join the infra team and dive in to do the newest and coolest devops tools today! Here are some of our open tasks you can help with: https://ovirt-jira.atlassian.net/secure/RapidBoard.jspa?rapidView=1&project… You don't have programming skills, not enough time for DevOps but you want still to contribute? Here are some bugs you can take care of, also without writing a line of code: https://bugzilla.redhat.com/buglist.cgi?quicksearch= <https://bugzilla.redhat.com/buglist.cgi?quicksearch=classification%3Aovirt%…> classification <https://bugzilla.redhat.com/buglist.cgi?quicksearch=classification%3Aovirt%…> %3Aovirt%20whiteboard%3Adocs <https://bugzilla.redhat.com/buglist.cgi?quicksearch=classification%3Aovirt%…> Do you prefer to test things? We have some test cases[5] you can try using nightly snapshots[6]. Do you want to contribute test cases? Most of the features[7] included in oVirt are missing a test case, you're welcome to contribute one! Do you want to contribute artworks? oVirt Live backgrounds and covers, release banners, stickers, .... Take a look at Fedora Artworks[9] as an example of what you can do Is this the first time you try to contribute to oVirt project? You can start from here [1][2]! You don't know gerrit very well? You can find some more docs here [3]. Any other question about development? Feel free to ask on devel(a)ovirt.org or on irc channel[4]. You don't really have time / skills for any development / documentation / testing related task? Spread the word[8]! Let us know you're getting involved, present yourself and tell us what you're going to do, you'll be welcome! [1] http://www.ovirt.org/Develop [2] http://www.ovirt.org/Working_with_oVirt_Gerrit [3] https://gerrit-review.googlesource.com/Documentation [4] http://www.ovirt.org/Community [5] http://www.ovirt.org/Category:TestCase [6] http://www.ovirt.org/Install_nightly_snapshot [7] http://www.ovirt.org/Category:Feature [8] http://www.zdnet.com/article/how-much-longer-can-red-hats-ovirt-remain-cove… [9] https://fedoraproject.org/wiki/Artwork#Resources -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 0

Hanging remove snapshot tasks
by Arsène Gschwind 09 Oct '15

09 Oct '15

Hi, I would like to update ovirt to 3.5.4 from 3.5.3 but engine-setup fails due to remove snapshot tasks. [ INFO ] Cleaning async tasks and compensations The following system tasks have been found running in the system: The following commands have been found running in the system: The following compensations have been found running in the system: org.ovirt.engine.core.bll.RemoveSnapshotCommand org.ovirt.engine.core.common.businessentities.Snapshot org.ovirt.engine.core.bll.RemoveSnapshotCommand org.ovirt.engine.core.common.businessentities.Snapshot org.ovirt.engine.core.bll.RemoveSnapshotCommand org.ovirt.engine.core.common.businessentities.Snapshot org.ovirt.engine.core.bll.RemoveSnapshotCommand org.ovirt.engine.core.common.businessentities.Snapshot Would you like to try to wait for that? This tasks are not showing up in the task monitor and I have no idea how to get them away to be abl to update. Thanks for any hint/help rgds, Arsène

4 11

VM's in wrong state
by Johan Kooijman 09 Oct '15

09 Oct '15

Hi all, Since a couple of days I have one node with non responsive VM's. The node is OK and the VM's are working actually, just show the wrong state. I'll find out why it happened, but for now I need to correct the state. Any ideas on how to do that? -- Met vriendelijke groeten / With kind regards, Johan Kooijman

2 2

migration procedures
by Brett Stevens 09 Oct '15

09 Oct '15

Hi Guys. We've been using a single instance all in one ovirt 3.5 with local storage with quite some success for about 6 months. We are a small school and have managed to secure some funding for a decent setup 2 x compute and 2 x storage clusters. I want a separate, non vm manager (so as to provide a host for gluster arbiter nodes ) along with some other functions (nagiso etc) So my real question, has anyone migrated a similar system? any ideas on how to get the current vms over to the new infrastructure. I can do shutdown and move, but it would be great if I can join the two and live migrate somehow. I'd like to use 3.6 when available if that is possible. thanks Brett Stevens

1 0

Re: [ovirt-users] Admin <at> internal inlog problems with clean install 3.6RC
by Christopher Miersma 09 Oct '15

09 Oct '15

I'm having the same problem with the latest packages for 3.6 RC. I've tried reinstalling a number of times, setting up with and without an answer file, and I always get a login denied error. Log entries: (from trying ovirt-shell) 2015-10-05 09:30:48,361 ERROR [org.ovirt.engine.core.aaa.filters.BasicAuthenticationFilter] (default task-1) [] User admin authentication failed. profile is internal. Invocation Result code is 0. Authn result code is ACCOUNT_EXPIRED (from web interface) 2015-10-05 10:32:25,034 INFO [org.ovirt.engine.core.bll.aaa.LoginBaseCommand] (default task-19) [] Can't login user 'admin' with authentication profile 'internal' because the authentication failed. 2015-10-05 10:32:25,040 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-19) [] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: The account for admin got expired. Please contact the system administrator. 2015-10-05 10:32:25,043 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-19) [] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: User admin@internal failed to log in. 2015-10-05 10:32:25,044 WARN [org.ovirt.engine.core.bll.aaa.LoginAdminUserCommand] (default task-19) [] CanDoAction of action 'LoginAdminUser' failed for user admin@internal. Reasons: USER_ACCOUNT_EXPIRED I have tried using the ovirt-aaa-jdbc-tool tool, with "user edit --account-valid-to," "user password-reset --password-valid-to," and "user unlock" options with multiple different dates, passwords of varying complexity, etc. and nothing seems to work. This is all happening during the middle of a hosted-engine setup, which throws everything off. I've also done clean re-installs a number of times. Early last week, when the release candidate first came out, I did not have this issue. I was able to complete the install without any problems. Has anyone found a way to get around this if it starts happening? Christopher

3 5

Unable to install Centos6
by Budur Nagaraju 08 Oct '15

08 Oct '15

HI I have selected "RedhHat Enterprise linux 6.x x64" under operating system field and While installing centos6.4 64Bit through ISO ,unable to succeed . Is there any limitation ? or it wont support centos ? can you pls help me ? Thanks, Nagaraju

2 1

Cannot remove Host. Server having Gluster volume. in 3.6 rc
by Liam Curtis 08 Oct '15

08 Oct '15

So I got around issue with 'Enable Gluster Service' missing from cluster diagram. I am trying to create a new data center and remove previously created gluster hosts. However, I get the above error. I have seen posts about checking a force remove check box, but I do not see any such box. Is there a way to forcefully remove? Thank you.

2 1

Questions about 3.6RC
by jaumotte, styve 08 Oct '15

08 Oct '15

Hi everybody, We have planned to migrate from xen open source to ovirt and we study the differences between 3.5.4 version and 3.6. I have some questions about this differences : - In 3.6RC, we don't see anymore the HostedEngine virtual machine in ovirt. My install is correct or this feature is not available anymore ? - In 3.6RC, my windows virtual machine status show an orange exlamation point which indicates " Actual operating system type differs from the configuration ". I don't know what is wrong, the operating system is correct and my vm works well. Thanks for your answers, S.J

4 8

Support for QinQ
by Sigbjorn Lie 08 Oct '15

08 Oct '15

Hi list, I've been looking around the web for QinQ support in Ovirt. I see that QinQ is supported in CentOS 6.x and above. However I cannot see any documented support in Ovirt. I've come across the page below which details QinQ as a future feature. Is QinQ still a future feature, or is it possible to use QinQ with Ovirt today somehow? http://www.ovirt.org/Networking Regards, Siggi

3 3

Managing two DCs with ovirt
by wodel youchi 08 Oct '15

08 Oct '15

Hi, I need some help to decide which is better / feasible with ovirt to manage two or more distant DCs. Let say that we have two distant DCs to virtualize with ovirt. we have two options to manage them: 1- install two engines, one on each DC, the good side is, if one DC is down, we can still manage the other one. the down side we will have two consoles to manage. 2- install one engine to manage the two DCs, the good side is the use of one console to rule them all :-) the down side is if the DC containing the engine become down, there is way to manage the other one. is there (will be there in the future) a way for example to create a slave engine in the second DC which can takeover and let the admin to manage the second DC? thanks in advance

4 3

LDAP authentication with TLS
by Steve Dainard 08 Oct '15

08 Oct '15

Hello, Trying to configure Ovirt 3.5.3.1-1.el7.centos for LDAP authentication. I've configured the appropriate aaa profile but I'm getting TLS errors when I search for users to add via ovirt: The connection reader was unable to successfully complete TLS negotiation: javax_net_ssl_SSLHandshakeException: sun_security_validator_ValidatorException: No trusted certificate found caused by sun_security_validator_ValidatorException: No trusted certificate found I added the external CA certificate using keytool as per https://github.com/oVirt/ovirt-engine-extension-aaa-ldap with appropriate adjustments of course: keytool -importcert -noprompt -trustcacerts -alias myrootca \ -file myrootca.pem -keystore myrootca.jks -storepass changeit I know this certificate works, and can connect to LDAP with TLS as I'm using the same LDAP configuration/certificate with SSSD. Can anyone clarify whether I should be adding the external CA certificate or the LDAP host certificate with keytool or any other suggestions? Thanks, Steve

3 3

Ovirt 3.6 RC import VM
by Wolfgang Bucher 08 Oct '15

08 Oct '15

This is a multi-part message in MIME format. Your mail reader does not understand MIME message format. --=_pig3fzdG9Uvcv3g7W139nCFW2yo2eXgUypLAKLpr2p26esXt Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: quoted-printable Hello=0D=0A=0D=0A=0D=0A=0D=0Ai am not able to import a vm from a exportdo= main, i can activate the exportdomain bu twhen i try to import a vm i get= following error:=0D=0A=0D=0AFailed to import Vm test to Data Center TEST= , Cluster INTEL=0D=0A=0D=0A=0D=0A=0D=0A=0D=0Aengine.log=20=0D=0A=0D=0A=0D= =0A=0D=0A015-10-01 11:53:00,809 INFO=C2=A0 [org.ovirt.engine.core.bll.Imp= ortVmCommand] (org.ovirt.thread.pool-8-thread-36) [7c844f2] Command [id=3D= b3af596c-7df0-4bdb-95d6-dffbc0a3213d]: Compensating NEW_ENTITY_ID of org.= ovirt.engine.core.common.businessentities.VmStatistics; snapshot: 1abdcfd= 8-77b2-47c3-9973-8184167b3774.=0D=0A2015-10-01 11:53:00,809 INFO=C2=A0 [o= rg.ovirt.engine.core.bll.ImportVmCommand] (org.ovirt.thread.pool-8-thread= -36) [7c844f2] Command [id=3Db3af596c-7df0-4bdb-95d6-dffbc0a3213d]: Compe= nsating NEW_ENTITY_ID of org.ovirt.engine.core.common.businessentities.Vm= Dynamic; snapshot: 1abdcfd8-77b2-47c3-9973-8184167b3774.=0D=0A2015-10-01 = 11:53:00,810 INFO=C2=A0 [org.ovirt.engine.core.bll.ImportVmCommand] (org.= ovirt.thread.pool-8-thread-36) [7c844f2] Command [id=3Db3af596c-7df0-4bdb= -95d6-dffbc0a3213d]: Compensating NEW_ENTITY_ID of org.ovirt.engine.core.= common.businessentities.VmStatic; snapshot: 1abdcfd8-77b2-47c3-9973-81841= 67b3774.=0D=0A2015-10-01 11:53:00,818 ERROR [org.ovirt.engine.core.dal.db= broker.auditloghandling.AuditLogDirector] (org.ovirt.thread.pool-8-thread= -36) [7c844f2] Correlation ID: 2221ad18, Job ID: df3b9ba1-90bf-4647-9712-= f4e3eccfc256, Call Stack: null, Custom Event ID: -1, Message: Failed to i= mport Vm test to Data Center TEST, Cluster INTEL=0D=0A2015-10-01 11:53:00= ,822 INFO=C2=A0 [org.ovirt.engine.core.bll.ImportVmCommand] (org.ovirt.th= read.pool-8-thread-36) [7c844f2] Lock freed to object 'EngineLock:{exclus= iveLocks=3D'[test=3D<VM_NAME, ACTION_TYPE_FAILED_NAME_ALREADY_USED>, 1abd= cfd8-77b2-47c3-9973-8184167b3774=3D<VM, ACTION_TYPE_FAILED_VM_IS_BEING_IM= PORTED$VmName test>]', sharedLocks=3D'[1abdcfd8-77b2-47c3-9973-8184167b37= 74=3D<REMOTE_VM, ACTION_TYPE_FAILED_VM_IS_BEING_IMPORTED$VmName test>]'}'= =0D=0A=0D=0A=0D=0A=0D=0A=0D=0A=0D=0A=0D=0A=0D=0A=0D=0A=0D=0A=0D=0AThanks=0D= =0A=0D=0A=0D=0AWolfgang Bucher=0D=0A=0D=0A=EF=BB=BF=0D=0A=EF=BB=BF=0D=0A=EF= =BB=BF=0D=0A=0D=0A=0D=0A=C2=A0=0D=0A --=_pig3fzdG9Uvcv3g7W139nCFW2yo2eXgUypLAKLpr2p26esXt Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://ww= w.w3.org/TR/html4/loose.dtd"><html>=0A<head>=0A <meta name=3D"Generator"= content=3D"Zarafa WebApp v7.1.11-46050">=0A <meta http-equiv=3D"Content= -Type" content=3D"text/html; charset=3Dutf-8">=0A <title>Ovirt 3.6 RC im= port VM</title>=0A</head>=0A<body>=0A<s= pan data-mce-bogus=3D"true" id=3D"_mce_caret">Hello</s= pan> i am not able t= o import a vm from a exportdomain, i can activate the exportdomain bu twh= en i try to import a vm i get following error:<s= pan data-mce-style=3D"font-size: 12pt; font-family: tahoma,arial,helvetic= a,sans-serif;" style=3D"font-size: 12pt; font-family: tahoma,arial,helvet= ica,sans-serif;">Failed to import Vm test to Data Center TEST, Cluster IN= TEL engine.log <= p style=3D"margin-top: 0px; margin-bottom: 0px; color: #000000; font-fami= ly: Arial, Verdana, sans-serif;"> 015-10= -01 11:53:00,809 INFO  [org.ovirt.engine.core.bll.ImportVmCommand] (= org.ovirt.thread.pool-8-thread-36) [7c844f2] Command [id=3Db3af596c-7df0-= 4bdb-95d6-dffbc0a3213d]: Compensating NEW_ENTITY_ID of org.ovirt.engine.c= ore.common.businessentities.VmStatistics; snapshot: 1abdcfd8-77b2-47c3-99= 73-8184167b3774. 2015-10-01 11:53:00,809 INFO  [org.ovirt.engine.= core.bll.ImportVmCommand] (org.ovirt.thread.pool-8-thread-36) [7c844f2] C= ommand [id=3Db3af596c-7df0-4bdb-95d6-dffbc0a3213d]: Compensating NEW_ENTI= TY_ID of org.ovirt.engine.core.common.businessentities.VmDynamic; snapsho= t: 1abdcfd8-77b2-47c3-9973-8184167b3774. 2015-10-01 11:53:00,810 INFO&= nbsp; [org.ovirt.engine.core.bll.ImportVmCommand] (org.ovirt.thread.pool-= 8-thread-36) [7c844f2] Command [id=3Db3af596c-7df0-4bdb-95d6-dffbc0a3213d= ]: Compensating NEW_ENTITY_ID of org.ovirt.engine.core.common.businessent= ities.VmStatic; snapshot: 1abdcfd8-77b2-47c3-9973-8184167b3774. 2015-1= 0-01 11:53:00,818 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandl= ing.AuditLogDirector] (org.ovirt.thread.pool-8-thread-36) [7c844f2] Corre= lation ID: 2221ad18, Job ID: df3b9ba1-90bf-4647-9712-f4e3eccfc256, Call S= tack: null, Custom Event ID: -1, Message: Failed to import Vm test to Dat= a Center TEST, Cluster INTEL 2015-10-01 11:53:00,822 INFO  [org.o= virt.engine.core.bll.ImportVmCommand] (org.ovirt.thread.pool-8-thread-36)= [7c844f2] Lock freed to object 'EngineLock:{exclusiveLocks=3D'[test=3D&l= t;VM_NAME, ACTION_TYPE_FAILED_NAME_ALREADY_USED>, 1abdcfd8-77b2-47c3-9= 973-8184167b3774=3D<VM, ACTION_TYPE_FAILED_VM_IS_BEING_IMPORTED$VmName= test>]', sharedLocks=3D'[1abdcfd8-77b2-47c3-9973-8184167b3774=3D<R= EMOTE_VM, ACTION_TYPE_FAILED_VM_IS_BEING_IMPORTED$VmName test>]'}'</sp= an> <p hasownproperty=3D"fun= ction hasOwnProperty() {=0A [native code]=0A}" valueof=3D"function val= ueOf() {=0A [native code]=0A}" isprototypeof=3D"function isPrototypeOf= () {=0A [native code]=0A}" propertyisenumerable=3D"function propertyIs= Enumerable() {=0A [native code]=0A}" tolocalestring=3D"function toLoca= leString() {=0A [native code]=0A}" tostring=3D"function toString() {=0A= [native code]=0A}" constructor=3D"function Object() {=0A [native c= ode]=0A}" style=3D"padding: 0; margin: 0;" data-mce-style=3D"padding: 0; = margin: 0;">=0A <p hasownpro= perty=3D"function hasOwnProperty() {=0A [native code]=0A}" valueof=3D"= function valueOf() {=0A [native code]=0A}" isprototypeof=3D"function i= sPrototypeOf() {=0A [native code]=0A}" propertyisenumerable=3D"functio= n propertyIsEnumerable() {=0A [native code]=0A}" tolocalestring=3D"fun= ction toLocaleString() {=0A [native code]=0A}" tostring=3D"function to= String() {=0A [native code]=0A}" constructor=3D"function Object() {=0A= [native code]=0A}" style=3D"padding: 0; margin: 0;" data-mce-style=3D= "padding: 0; margin: 0;">=0A </p= ><p hasownproperty=3D"function hasOwnProperty() {=0A [native code]=0A}= " valueof=3D"function valueOf() {=0A [native code]=0A}" isprototypeof=3D= "function isPrototypeOf() {=0A [native code]=0A}" propertyisenumerable= =3D"function propertyIsEnumerable() {=0A [native code]=0A}" tolocalest= ring=3D"function toLocaleString() {=0A [native code]=0A}" tostring=3D"= function toString() {=0A [native code]=0A}" constructor=3D"function Ob= ject() {=0A [native code]=0A}" style=3D"padding: 0; margin: 0;" data-m= ce-style=3D"padding: 0; margin: 0;">=0AThanks <p hasownproperty=3D"function hasOwnProperty() {=0A = [native code]=0A}" valueof=3D"function valueOf() {=0A [native code]=0A= }" isprototypeof=3D"function isPrototypeOf() {=0A [native code]=0A}" p= ropertyisenumerable=3D"function propertyIsEnumerable() {=0A [native co= de]=0A}" tolocalestring=3D"function toLocaleString() {=0A [native code= ]=0A}" tostring=3D"function toString() {=0A [native code]=0A}" constru= ctor=3D"function Object() {=0A [native code]=0A}" style=3D"padding: 0;= margin: 0;" data-mce-style=3D"padding: 0; margin: 0;">=0AWolfgang Bucher<p hasownproperty=3D"func= tion hasOwnProperty() {=0A [native code]=0A}" valueof=3D"function valu= eOf() {=0A [native code]=0A}" isprototypeof=3D"function isPrototypeOf(= ) {=0A [native code]=0A}" propertyisenumerable=3D"function propertyIsE= numerable() {=0A [native code]=0A}" tolocalestring=3D"function toLocal= eString() {=0A [native code]=0A}" tostring=3D"function toString() {=0A= [native code]=0A}" constructor=3D"function Object() {=0A [native c= ode]=0A}" style=3D"padding: 0; margin: 0;" data-mce-style=3D"padding: 0; = margin: 0;">=EF=BB=BF =EF=BB=BF =EF=BB=BF </s= pan> =0A</body>=0A</html> --=_pig3fzdG9Uvcv3g7W139nCFW2yo2eXgUypLAKLpr2p26esXt--

3 2

LDAP
by Fernando Fuentes 07 Oct '15

07 Oct '15

I migrated from 3.4 to 3.5 and I see that my kerberos/ldap is no longer working and looking further now I see that 3.5 uses AAA. Is there a migration process to move my kerberos/ldap to AAA or a guide to this? TIA!

2 2

'Enable Gluster Service' and 'Enable Virt Service' missing from New Cluster dialog in 3.6 rc
by Liam Curtis 07 Oct '15

07 Oct '15

Hello all, In oVirt Engine Version: 3.5.4.2-1.el7.centos, I have above two options when creating a new cluster. In oVirt Engine Version: 3.6.0-0.0.master.20150909083746.gitbcc44ff.el7.centos, I no longer have those options. I only have: Enable to set VM maintenance reason Enable to set Host maintenance reason Has this been removed or am I missing something? Do I need to enable gluster support somewhere in UI? Thanks in advance.

2 1