- Users - oVirt List Archives

selectively disabling IPv6 on bridges
by Rik Theys 07 May '15

07 May '15

Hi, I'm looking for a way to selectively disable IPv6 on the bridge interfaces on the oVirt hosts. When oVirt creates the bridges for all logical networks on the host, it keeps the default settings for IPv6 which means all bridges get a link-local address and accept router advertisements. When a VM is created on the logical network, it can now reach the host over IPv6 (but not over IPv4 if no IP address has been assigned on the host). If it sends out a router advertisement it can even create a global IPv6 address (haven't tested this). How can I prevent this? I would like to prevent the guest from IPv6 access to the host but the guest itself still needs IPv6 access (global IPv6 addresses). Is it sufficient to create a sysctl config file that says: net.ipv6.conf.default.disable_ipv6 = 1 ? Regards, Rik -- Rik Theys System Engineer KU Leuven - Dept. Elektrotechniek (ESAT) Kasteelpark Arenberg 10 bus 2440 - B-3001 Leuven-Heverlee +32(0)16/32.11.07 ---------------------------------------------------------------- <<Any errors in spelling, tact or fact are transmission errors>>

3 7

High number of XFS extents migrating disk from iscsi to Gluster
by Adrián Santos Marrero 07 May '15

07 May '15

Hi!, I've been migrating my Ovirt storage from iscsi to Gluster. What I've been doing is moving the disks with the VM powered off. This procedure was fine until I tried to migrate a 100GB disk from a VM with an Oracle DB. During this migration the access to Gluster slowed down, affecting the whole cluster (VDSM timeout in oVirt Engine, VM's entered in unknown state, gluster client disconnected from a brick) What I found in gluster servers was a XFS error: XFS: possible memory allocation deadlock in kmem_alloc (mode:0x250) And this error is due to the number of extents of the file (~ 8M): gluster01:/gluster/ovirt1_brick_01/brick/89c4e113-1003-4b4e-850e-e7fc5bf2edc6/images/e5b7fc46-4168-4019-a13a-f9b7093d0534# > xfs_bmap f9cd555d-fd98-499f-a853-d0ce76eecd37 | wc -l > 8627613 > I'm using Gluster 3.6.2 and Centos 7 (3.10.0-229.1.2.el7.x86_64 kernel). Does anyone know why is qemu-img generating this so fragmented file? Regards. -- ---------------------------------------------------------------- Adrián Santos Marrero Técnico de Sistemas - Área de Infraestructuras TIC Servicios de Tecnologías de la Información y Comunicación (STIC) Universidad de La Laguna (ULL) Teléfono/Phone: +34 922 845089 ---------------------------------------------------------------- Este mensaje puede contener información confidencial y/o privilegiada. Si usted no es el destinatario o lo ha recibido por error debe borrarlo inmediatamente. Está estrictamente prohibido por la legislación vigente realizar cualquier copia, revelación o distribución del contenido de este mensaje sin autorización expresa. This e-mail may contain confidential and/or privileged information. If you are not the intended recipient or have received this e-mail in error you must destroy it. Any unauthorised copying, disclosure or distribution of the material in this e-mail is strictly forbidden by current legislation.

4 7

Upgrade Node through oVirt Manager
by Kevin 07 May '15

07 May '15

Hi all, Hi installed two nodes with the 3.5.1 ISO. Now I want to upgrade them to 3.5.2 new ISO. I uploaded the ISO file to my ISO domain with engine-iso-uploader command. But I can't choose my ISO file in the Manager to upgrade my nodes. How can I select the good Iso file ? Thanks --- Kevin

2 1

autologin into vm desktop
by Adolfo 07 May '15

07 May '15

Hello, My name is Adolfo. I'm in charge of the development of UDS, an open source connection broker (with commercial support if requested) (http://www.ovirt.org/Universidad_de_Sevilla_Case_Study is done with it for example). I don't know if this is the place to post this "request for help", if not, please forgive me :) The case is that we are including Spice as an accepted protocol for connecting to VMs (currently we allow rdp, rgs, nx, ...) provided by oVirt, and we have found the following "issue". It's ease to get the connection parameters for the VM using REST api, even get the ticket for allowing connection, but i have been looking for a way "logging user" directly into desktop, not only connect to "display" but also "log in" into remote without needed to use a second authentication. I have seen that oVirt Portal currently allows this, and i have found also that vsdClient can do login using "vdsClient -s <HOSTIP> desktopLogin <VMID> <DOMAIN> <USER> <PASSWORD>", and although it is possible to use this, it will be a bit "tricky" to get it working i think. My question is... ¿Is any way of doing "desktop login" using REST API, or any other "simple method" from an external app such as this broker?. ¿If yes, how? :-) ¿If not, will be support for this an anyone knows how? Thank you, and again, if this is not the correct list, sorry for the annoyance. Adolfo Gómez

3 9

Re: [ovirt-users] GetGlusterVolumeAdvancedDetailsQuery & GetGlusterVolumeProfileInfoQuery when using seperate storage network
by Jorick Astrego 07 May '15

07 May '15

This is a multi-part message in MIME format. --------------080602020902020502010500 Content-Type: text/plain; charset="windows-1252" Content-Transfer-Encoding: quoted-printable On 05/06/2015 06=3A24 PM=2C knarra wrote=3A =3E On 05/06/2015 06=3A59 PM=2C Jorick Astrego wrote=3A =3E=3E =3E=3E =3E=3E On 05/06/2015 02=3A49 PM=2C knarra wrote=3A =3E=3E=3E On 05/06/2015 05=3A33 PM=2C Jorick Astrego wrote=3A =3E=3E=3E=3E Hi=2C =3E=3E=3E=3E =3E=3E=3E=3E Looking forward to bz 1049994 Allow choosing network interf= ace =3E=3E=3E=3E for gluster domain traffic=2E =3E=3E=3E=3E =3E=3E=3E=3E Currently I have the bricks on a different storage network and= =3E=3E=3E=3E can=27t get the volume details or profile it=2E =3E=3E=3E=3E =3E=3E=3E=3E Will this be handled in 3=2E6 properly=3F I don=27t see any ch= anges in =3E=3E=3E=3E gerrit regarding this=2C but I can be ovelooking it=2E =3E=3E=3E=3E =3E=3E=3E=3E The errors I get currently=3A =3E=3E=3E=3E =3E=3E=3E=3E Could not fetch brick profile stats =3E=3E=3E=3E =3E=3E=3E=3E 2015-05-06 10=3A34=3A22=2C430 ERROR =3E=3E=3E=3E =5Borg=2Eovirt=2Eengine=2Ecore=2Ebll=2Egluster=2EGetGluste= rVolumeProfileInfoQuery=5D =3E=3E=3E=3E =28ajp--127=2E0=2E0=2E1-8702-27=29 Query GetGlusterVolumeP= rofileInfoQuery =3E=3E=3E=3E failed=2E Exception message is null =3A =3E=3E=3E=3E java=2Elang=2ENullPointerException=3A java=2Elang=2ENullPo= interException =3E=3E=3E=3E =3E=3E=3E=3E and =3E=3E=3E=3E =3E=3E=3E=3E Error in fetching the brick details=2C please try again=2E= =3E=3E=3E=3E =3E=3E=3E=3E 2015-05-06 10=3A36=3A14=2C205 ERROR =3E=3E=3E=3E =5Borg=2Eovirt=2Eengine=2Ecore=2Ebll=2Egluster=2EGetGluste= rVolumeAdvancedDetailsQuery=5D =3E=3E=3E=3E =28ajp--127=2E0=2E0=2E1-8702-55=29 Query =3E=3E=3E=3E GetGlusterVolumeAdvancedDetailsQuery failed=2E Exception m= essage =3E=3E=3E=3E is VdcBLLException=3A Volume status failed =3E=3E=3E=3E error=3A Staging failed on *=2E*=2E*=2E*=2E Error=3A No br= ick =3E=3E=3E=3E glustertest1=2Enetbulae=2Etest/gluster/brick1 in volume da= ta =3E=3E=3E=3E Staging failed on *=2E*=2E*=2E*=2E Error=3A No brick=20 =3E=3E=3E=3E glustertest1=2Enetbulae=2Etest=3A/gluster/brick1 in volume= data =3E=3E=3E=3E return code=3A -1 =28Failed with error GlusterVolumeStatus= Failed =3E=3E=3E=3E and code 4157=29 =3A =3E=3E=3E=3E org=2Eovirt=2Eengine=2Ecore=2Ecommon=2Eerrors=2EVdcBLLExce= ption=3A =3E=3E=3E=3E VdcBLLException=3A Volume status failed =3E=3E=3E=3E error=3A Staging failed on *=2E*=2E*=2E*=2E Error=3A No br= ick=20 =3E=3E=3E=3E glustertest1=2Enetbulae=2Etest=3A/gluster/brick1 in volume= data =3E=3E=3E=3E Staging failed on *=2E*=2E*=2E*=2E Error=3A No brick=20 =3E=3E=3E=3E glustertest1=2Enetbulae=2Etest=3A/gluster/brick1 in volume= data =3E=3E=3E=3E return code=3A -1 =28Failed with error GlusterVolumeStatus= Failed =3E=3E=3E=3E and code 4157=29=3A =3E=3E=3E=3E org=2Eovirt=2Eengine=2Ecore=2Ecommon=2Eerrors=2EVdcBLLExce= ption=3A =3E=3E=3E=3E VdcBLLException=3A Volume status failed =3E=3E=3E=3E error=3A Staging failed on *=2E*=2E*=2E*=2E Error=3A No br= ick=20 =3E=3E=3E=3E glustertest1=2Enetbulae=2Etest=3A/gluster/brick1 in volume= data =3E=3E=3E=3E Staging failed on *=2E*=2E*=2E*=2E Error=3A No brick=20 =3E=3E=3E=3E glustertest1=2Enetbulae=2Etest=3A/gluster/brick1 in volume= data =3E=3E=3E=3E return code=3A -1 =28Failed with error GlusterVolumeStatus= Failed =3E=3E=3E=3E and code 4157=29 =3E=3E=3E=3E =3E=3E=3E=3E =3E=3E=3E=3E =3E=3E=3E=3E =3E=3E=3E=3E =3E=3E=3E=3E Met vriendelijke groet=2C With kind regards=2C =3E=3E=3E=3E =3E=3E=3E=3E Jorick Astrego* =3E=3E=3E=3E =3E=3E=3E=3E Netbulae Virtualization Experts * =3E=3E=3E=3E --------------------------------------------------------------= ---------- =3E=3E=3E=3E Tel=3A 053 20 30 270 =09info=40netbulae=2Eeu =09Staalsteden 4-= 3A =09KvK 08198180 =3E=3E=3E=3E Fax=3A 053 20 30 271 =09www=2Enetbulae=2Eeu =097547 TA Ensched= e =09BTW =3E=3E=3E=3E NL821234584B01 =3E=3E=3E=3E =3E=3E=3E=3E =3E=3E=3E=3E --------------------------------------------------------------= ---------- =3E=3E=3E=3E =3E=3E=3E=3E =3E=3E=3E=3E =3E=3E=3E=3E =5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F= =5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F= =5F=5F =3E=3E=3E=3E Users mailing list =3E=3E=3E=3E Users=40ovirt=2Eorg =3E=3E=3E=3E http=3A//lists=2Eovirt=2Eorg/mailman/listinfo/users =3E=3E=3E Hi=2C =3E=3E=3E =3E=3E=3E Can you please check what does your gluster peer status on ea= ch =3E=3E=3E of your nodes return=3F I guess they are in disconnected state a= nd =3E=3E=3E that is the reason you are not able to view these details=2E =3E=3E=3E =3E=3E=3E Thanks =3E=3E=3E kasturi =3E=3E=3E =3E=3E On the nodes it gives me the following=3A =3E=3E =3E=3E gluster peer status =3E=3E Connection failed=2E Please check if gluster daemon is operation= al=2E =3E=3E =3E This means that glusterd is not running on this node=2E you could check= =3E the status of glusterd by running the command =27service glusterd statu= s=27=2E =3E =3E please start glusterd by running the command =27service glusterd start= =27 =3E on both of your nodes=2E =3E =3E Ideally when glusterd goes down node in ovirt should move to =3E non-operational=2E Because of this BZ 1207150 as of now it is not =3E changing the state to non operational=2E There is no glusterd on the compute nodes in our setup=2C we have two clusters=2E One for virt hosts only and one for GlusterFS only=2E Like I said=2C everything is Up and running fine=2E It=27s just that I can= =27t get the stats because the hostname !=3D GlusterFS NIC ip =3E=3E =3E=3E =3E=3E But everyting is up and ovirt found the manually configured volume= =3E=3E perfectly=2E But the hostname it lists as glustertest1=2Enetbulae=2E= test is =3E=3E not what my volume uses for communication as I created the volume =3E=3E using the ip=27s of the storage network=2E =3E=3E =3E=3E =20 =3E=3E gluster peer status =3E=3E Number of Peers=3A 2 =3E=3E =3E=3E Hostname=3A 10=2E1=2E1=2E3 =3E=3E Uuid=3A 1cc0875e-1699-42ae-aed2-9152667ed5af =3E=3E State=3A Peer in Cluster =28Connected=29 =3E=3E =3E=3E Hostname=3A 10=2E1=2E1=2E2 =3E=3E Uuid=3A a0b3ac13-7388-441a-a238-1deb023cab6c =3E=3E State=3A Peer in Cluster =28Connected=29 =3E=3E =3E Did you import already existing cluster =3F No=2C I provisioned the nodes=2E Added them to our glusterfs cluster =28wit= h virt service disabled=29 and created the volume manually=2E oVirt auto-discovered the manual created volume after that=2E Error=3A No brick *glustertest1=2Enetbulae=2Etest*=3A/gluster/brick1 i= n volume data=20 Hostname=3A *10=2E1=2E1=2E3* Things should work better in 3=2E6 =28bz1049994=29=2C but I don=27t see any= code changes to =22GetGlusterVolumeProfileInfoQuery=22 linked to this in Bugzill= a=2E Met vriendelijke groet=2C With kind regards=2C Jorick Astrego Netbulae Virtualization Experts=20 ---------------- =09Tel=3A 053 20 30 270 =09info=40netbulae=2Eeu =09Staalsteden 4-3A =09KvK= 08198180 =09Fax=3A 053 20 30 271 =09www=2Enetbulae=2Eeu =097547 TA Enschede =09BTW= NL821234584B01 ---------------- --------------080602020902020502010500 Content-Type: text/html; charset="windows-1252" Content-Transfer-Encoding: quoted-printable =3Chtml=3E =3Chead=3E =3Cmeta content=3D=22text/html=3B charset=3Dwindows-1252=22 http-equiv=3D=22Content-Type=22=3E =3C/head=3E =3Cbody bgcolor=3D=22=23FFFFFF=22 text=3D=22=23000000=22=3E =3Cbr=3E =3Cbr=3E =3Cdiv class=3D=22moz-cite-prefix=22=3EOn 05/06/2015 06=3A24 PM=2C knar= ra wrote=3A=3Cbr=3E =3C/div=3E =3Cblockquote cite=3D=22mid=3A554A403A=2E9070308=40redhat=2Ecom=22 type= =3D=22cite=22=3E =3Cmeta content=3D=22text/html=3B charset=3Dwindows-1252=22 http-equiv=3D=22Content-Type=22=3E =3Cdiv class=3D=22moz-cite-prefix=22=3EOn 05/06/2015 06=3A59 PM=2C Jo= rick Astrego wrote=3A=3Cbr=3E =3C/div=3E =3Cblockquote cite=3D=22mid=3A554A1721=2E3080605=40netbulae=2Eeu=22 t= ype=3D=22cite=22=3E =3Cmeta content=3D=22text/html=3B charset=3Dwindows-1252=22 http-equiv=3D=22Content-Type=22=3E =3Cbr=3E =3Cbr=3E =3Cdiv class=3D=22moz-cite-prefix=22=3EOn 05/06/2015 02=3A49 PM=2C= knarra wrote=3A=3Cbr=3E =3C/div=3E =3Cblockquote cite=3D=22mid=3A554A0DEB=2E2080002=40redhat=2Ecom=22= type=3D=22cite=22=3E =3Cmeta content=3D=22text/html=3B charset=3Dwindows-1252=22 http-equiv=3D=22Content-Type=22=3E =3Cdiv class=3D=22moz-cite-prefix=22=3EOn 05/06/2015 05=3A33 PM= =2C Jorick Astrego wrote=3A=3Cbr=3E =3C/div=3E =3Cblockquote cite=3D=22mid=3A554A031A=2E1060200=40netbulae=2Eeu= =22 type=3D=22cite=22=3E =3Cmeta content=3D=22text/html=3B charset=3Dwindows-1252=22 http-equiv=3D=22Content-Type=22=3E Hi=2C=3Cbr=3E =3Cbr=3E Looking forward to =3Cmeta http-equiv=3D=22content-type=22 content=3D=22text/html= =3B charset=3Dwindows-1252=22=3E =3Cmeta name=3D=22generator=22 content=3D=22Sheets=22=3E =3Cstyle type=3D=22text/css=22=3E=3C!--td =7Bborder=3A 1px soli= d =23ccc=3B=7Dbr =7Bmso-data-placement=3Asame-cell=3B=7D--=3E=3C/style=3Ebz= 1049994=A0=A0=A0 Allow choosing network interface for gluster= domain traffic=2E=3Cbr=3E =3Cbr=3E Currently I have the bricks on a different storage network and can=27t get the volume details or profile it=2E =3Cbr=3E =3Cbr=3E Will this be handled in 3=2E6 properly=3F I don=27t see any changes in gerrit regarding this=2C but I can be ovelooking it=2E=3Cbr=3E =3Cbr=3E The errors I get currently=3A=3Cbr=3E =3Cbr=3E =3Cblockquote=3ECould not fetch brick profile stats=3Cbr=3E =3C/blockquote=3E =3Cblockquote=3E2015-05-06 10=3A34=3A22=2C430 ERROR =5Borg=2Eovirt=2Eengine=2Ecore=2Ebll=2Egluster=2EGetGlusterVo= lumeProfileInfoQuery=5D =28ajp--127=2E0=2E0=2E1-8702-27=29 Query GetGlusterVolumeProfileInfoQuery failed=2E Exception message= is null =3A java=2Elang=2ENullPointerException=3A java=2Elang=2ENullPointerException=3Cbr=3E =3Cbr=3E =3C/blockquote=3E and=3Cbr=3E =3Cblockquote=3EError in fetching the brick details=2C please t= ry again=2E=3Cbr=3E =3Cbr=3E 2015-05-06 10=3A36=3A14=2C205 ERROR =5Borg=2Eovirt=2Eengine=2Ecore=2Ebll=2Egluster=2EGetGlusterVo= lumeAdvancedDetailsQuery=5D =28ajp--127=2E0=2E0=2E1-8702-55=29 Query GetGlusterVolumeAdvancedDetailsQuery failed=2E Exception message is VdcBLLException=3A Volume status failed=3Cbr=3E error=3A Staging failed on *=2E*=2E*=2E*=2E Error=3A No brick= glustertest1=2Enetbulae=2Etest/gluster/brick1 in volume data= =3Cbr=3E Staging failed on *=2E*=2E*=2E*=2E Error=3A No brick=A0 glustertest1=2Enetbulae=2Etest=3A/gluster/brick1 in volume da= ta=3Cbr=3E return code=3A -1 =28Failed with error GlusterVolumeStatusFailed and code 4157=29 =3A org=2Eovirt=2Eengine=2Ecore=2Ecommon=2Eerrors=2EVdcBLLExcepti= on=3A VdcBLLException=3A Volume status failed=3Cbr=3E error=3A Staging failed on *=2E*=2E*=2E*=2E Error=3A No brick= =A0 glustertest1=2Enetbulae=2Etest=3A/gluster/brick1 in volume da= ta=3Cbr=3E Staging failed on *=2E*=2E*=2E*=2E Error=3A No brick=A0 glustertest1=2Enetbulae=2Etest=3A/gluster/brick1 in volume da= ta=3Cbr=3E return code=3A -1 =28Failed with error GlusterVolumeStatusFailed and code 4157=29=3A org=2Eovirt=2Eengine=2Ecore=2Ecommon=2Eerrors=2EVdcBLLExcepti= on=3A VdcBLLException=3A Volume status failed=3Cbr=3E error=3A Staging failed on *=2E*=2E*=2E*=2E Error=3A No brick= =A0 glustertest1=2Enetbulae=2Etest=3A/gluster/brick1 in volume da= ta=3Cbr=3E Staging failed on *=2E*=2E*=2E*=2E Error=3A No brick=A0 glustertest1=2Enetbulae=2Etest=3A/gluster/brick1 in volume da= ta=3Cbr=3E return code=3A -1 =28Failed with error GlusterVolumeStatusFailed and code 4157=29=3Cbr=3E =3C/blockquote=3E =3Cblockquote=3E=3Cbr=3E =3C/blockquote=3E =3Cbr=3E =3Cbr=3E =3Cbr=3E =3Cspan style=3D=22color=3A=23604c78=3B=22=3E=3Cfont color=3D= =22000000=22=3E=3Cspan style=3D=22mso-fareast-language=3Aen-gb=3B=22 lang=3D=22N= L=22=3EMet vriendelijke groet=2C With kind regards=2C=3Cbr=3E =3Cbr=3E =3C/span=3EJorick Astrego=3C/font=3E=3C/span=3E=3Cb style=3D=22color=3A=23604c78=22=3E=3Cbr=3E =3Cbr=3E Netbulae Virtualization Experts =3C/b=3E=3Cbr=3E =3Chr style=3D=22border=3Anone=3Bborder-top=3A1px solid =23ccc= =3B=22=3E =3Ctable style=3D=22width=3A 522px=22=3E =3Ctbody=3E =3Ctr=3E =3Ctd style=3D=22width=3A 130px=3Bfont-size=3A 10px=22=3E= Tel=3A 053 20 30 270=3C/td=3E =3Ctd style=3D=22width=3A 130px=3Bfont-size=3A 10px=22=3E= =3Ca moz-do-not-send=3D=22true=22 class=3D=22moz-txt-link-abbreviated=22 href=3D=22mailto=3Ainfo=40netbulae=2Eeu=22=3Einfo=40n= etbulae=2Eeu=3C/a=3E=3C/td=3E =3Ctd style=3D=22width=3A 130px=3Bfont-size=3A 10px=22=3E= Staalsteden 4-3A=3C/td=3E =3Ctd style=3D=22width=3A 130px=3Bfont-size=3A 10px=22=3E= KvK 08198180=3C/td=3E =3C/tr=3E =3Ctr=3E =3Ctd style=3D=22width=3A 130px=3Bfont-size=3A 10px=22=3E= Fax=3A 053 20 30 271=3C/td=3E =3Ctd style=3D=22width=3A 130px=3Bfont-size=3A 10px=22=3E= =3Ca moz-do-not-send=3D=22true=22 class=3D=22moz-txt-link-abbreviated=22 href=3D=22http=3A//www=2Enetbulae=2Eeu=22=3Ewww=2Enet= bulae=2Eeu=3C/a=3E=3C/td=3E =3Ctd style=3D=22width=3A 130px=3Bfont-size=3A 10px=22=3E= 7547 TA Enschede=3C/td=3E =3Ctd style=3D=22width=3A 130px=3Bfont-size=3A 10px=22=3E= BTW NL821234584B01=3C/td=3E =3C/tr=3E =3C/tbody=3E =3C/table=3E =3Cbr=3E =3Chr style=3D=22border=3Anone=3Bborder-top=3A1px solid =23ccc= =3B=22=3E=3Cbr=3E =3Cbr=3E =3Cfieldset class=3D=22mimeAttachmentHeader=22=3E=3C/fieldset= =3E =3Cbr=3E =3Cpre wrap=3D=22=22=3E=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F= =5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F= =5F=5F=5F=5F=5F=5F=5F=5F=5F Users mailing list =3Ca moz-do-not-send=3D=22true=22 class=3D=22moz-txt-link-abbreviated=22 hr= ef=3D=22mailto=3AUsers=40ovirt=2Eorg=22=3EUsers=40ovirt=2Eorg=3C/a=3E =3Ca moz-do-not-send=3D=22true=22 class=3D=22moz-txt-link-freetext=22 href= =3D=22http=3A//lists=2Eovirt=2Eorg/mailman/listinfo/users=22=3Ehttp=3A//lis= ts=2Eovirt=2Eorg/mailman/listinfo/users=3C/a=3E=3C/pre=3E =3C/blockquote=3E Hi=2C=3Cbr=3E =3Cbr=3E =A0=A0=A0 Can you please check what does your gluster peer status= on each of your nodes return=3F=A0 I guess they are in disconnected= state and that is the reason you are not able to view these details=2E=3Cbr=3E =3Cbr=3E Thanks=3Cbr=3E kasturi=3Cbr=3E =3Cblockquote cite=3D=22mid=3A554A031A=2E1060200=40netbulae=2Eeu= =22 type=3D=22cite=22=3E =3C/blockquote=3E =3Cbr=3E =3C/blockquote=3E On the nodes it gives me the following=3A=3Cbr=3E =3Cbr=3E =3Cblockquote=3Egluster peer status=3Cbr=3E Connection failed=2E Please check if gluster daemon is operational=2E=3Cbr=3E =3C/blockquote=3E =3C/blockquote=3E This means that glusterd is not running on this node=2E you could check the status of glusterd by running the command =27service glusterd status=27=2E =3Cbr=3E =3Cbr=3E please start glusterd by running the command =27service glusterd start=27 on both of your nodes=2E=3Cbr=3E =3Cbr=3E Ideally when glusterd goes down node in ovirt should move to non-operational=2E Because of this BZ 1207150 as of now it is not changing the state to non operational=2E=3Cbr=3E =3C/blockquote=3E =3Cbr=3E There is no glusterd on the compute nodes in our setup=2C we have two= clusters=2E One for virt hosts only and one for GlusterFS only=2E=3Cbr= =3E =3Cbr=3E =3Cbr=3E Like I said=2C everything is Up and running fine=2E It=27s just that I= can=27t get the stats because the hostname !=3D GlusterFS NIC ip=3Cbr= =3E =3Cbr=3E =3Cbr=3E =3Cblockquote cite=3D=22mid=3A554A403A=2E9070308=40redhat=2Ecom=22 type= =3D=22cite=22=3E =3Cblockquote cite=3D=22mid=3A554A1721=2E3080605=40netbulae=2Eeu=22 t= ype=3D=22cite=22=3E =3Cblockquote=3E =3Cbr=3E =3Cbr=3E =3C/blockquote=3E But everyting is up and ovirt found the manually configured volume perfectly=2E But the hostname it lists as glustertest1=2Enetbulae=2Etest is not what my volume uses for communication as I created the volume using the ip=27s of the storage network=2E=3Cbr=3E =3Cbr=3E =3Cblockquote=3E=A0=3Cbr=3E gluster peer status=3Cbr=3E Number of Peers=3A 2=3Cbr=3E =3Cbr=3E Hostname=3A 10=2E1=2E1=2E3=3Cbr=3E Uuid=3A 1cc0875e-1699-42ae-aed2-9152667ed5af=3Cbr=3E State=3A Peer in Cluster =28Connected=29=3Cbr=3E =3Cbr=3E Hostname=3A 10=2E1=2E1=2E2=3Cbr=3E Uuid=3A a0b3ac13-7388-441a-a238-1deb023cab6c=3Cbr=3E State=3A Peer in Cluster =28Connected=29=3Cbr=3E =3Cbr=3E =3C/blockquote=3E =3C/blockquote=3E Did you import already existing cluster =3F=3Cbr=3E =3C/blockquote=3E =3Cbr=3E No=2C I provisioned the nodes=2E Added them to our glusterfs cluster =28with virt service disabled=29 and created the volume manually=2E=3Cb= r=3E =3Cbr=3E oVirt auto-discovered the manual created volume after that=2E=3Cbr=3E= =3Cbr=3E =3Cblockquote=3EError=3A No brick=A0 =3Cb=3Eglustertest1=2Enetbulae=2Et= est=3C/b=3E=3A/gluster/brick1 in volume data=A0 =3Cbr=3E =3Cbr=3E Hostname=3A =3Cb=3E10=2E1=2E1=2E3=3C/b=3E=3Cbr=3E =3Cbr=3E =3C/blockquote=3E Things should work better in 3=2E6 =28bz1049994=29=2C but I don=27t see= any code changes to =22GetGlusterVolumeProfileInfoQuery=22 linked to this i= n Bugzilla=2E=3Cbr=3E =3Cbr=3E =3Cbr=3E =3Cbr=3E =3Cbr=3E =20= =3CBR /=3E =3CBR /=3E =3Cb style=3D=22color=3A=23604c78=22=3E=3C/b=3E=3Cbr=3E=3Cspan style=3D=22c= olor=3A=23604c78=3B=22=3E=3Cfont color=3D=22000000=22=3E=3Cspan style=3D=22= mso-fareast-language=3Aen-gb=3B=22 lang=3D=22NL=22=3EMet vriendelijke groet= =2C With kind regards=2C=3Cbr=3E=3Cbr=3E=3C/span=3EJorick Astrego=3C/font= =3E=3C/span=3E=3Cb style=3D=22color=3A=23604c78=22=3E=3Cbr=3E=3Cbr=3ENetbul= ae Virtualization Experts =3C/b=3E=3Cbr=3E=3Chr style=3D=22border=3Anone=3B= border-top=3A1px solid =23ccc=3B=22=3E=3Ctable style=3D=22width=3A 522px=22= =3E=3Ctbody=3E=3Ctr=3E=3Ctd style=3D=22width=3A 130px=3Bfont-size=3A 10px= =22=3ETel=3A 053 20 30 270=3C/td=3E =3Ctd style=3D=22width=3A 130px=3Bf= ont-size=3A 10px=22=3Einfo=40netbulae=2Eeu=3C/td=3E =3Ctd style=3D=22wid= th=3A 130px=3Bfont-size=3A 10px=22=3EStaalsteden 4-3A=3C/td=3E =3Ctd sty= le=3D=22width=3A 130px=3Bfont-size=3A 10px=22=3EKvK 08198180=3C/td=3E=3C/tr= =3E=3Ctr=3E =3Ctd style=3D=22width=3A 130px=3Bfont-size=3A 10px=22=3EFax= =3A 053 20 30 271=3C/td=3E =3Ctd style=3D=22width=3A 130px=3Bfont-size= =3A 10px=22=3Ewww=2Enetbulae=2Eeu=3C/td=3E =3Ctd style=3D=22width=3A 130= px=3Bfont-size=3A 10px=22=3E7547 TA Enschede=3C/td=3E =3Ctd style=3D=22w= idth=3A 130px=3Bfont-size=3A 10px=22=3EBTW NL821234584B01=3C/td=3E=3C/tr=3E= =3C/tbody=3E=3C/table=3E=3Cbr=3E=3Chr style=3D=22border=3Anone=3Bborder-top= =3A1px solid =23ccc=3B=22=3E=3CBR /=3E =3C/body=3E =3C/html=3E --------------080602020902020502010500--

3 3

Gotchas restoring ovirt engine on centos, backup was on FC19
by David Smith 06 May '15

06 May '15

Had to switch to centos because FC is no longer supported (3.5.0 max) Gotchas: 1) dealing with the database restore was a pita, i found that from several failed attempts setup had created extra engine databases. I had to use engine-clean to wipe as much as possible, then manually delete all the engine-* and engine databases, then do engine-setup to create a new database, grep the config for the db password, engine-clean to wipe everything (removes all data but leaves empty database) then do a restore using the password from the grep step. 2) http SSL was bad; FC used a different SSL config from centos, and this seemed to be reproduced by engine-setup causing failures during setup. The http error was around SSLPassPhraseDialog, in FC: SSLPassPhraseDialog exec:/usr/libexec/httpd-ssl-pass-dialog in centos: LoadModule ssl_module modules/mod_ssl.so SSLPassPhraseDialog builtin This caused engine-setup to fail and http not to start.

1 0

updated libvirt for EL7?
by Paul Jansen 06 May '15

06 May '15

------=_Part_1380138_18777795.1430920228532 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Hello.I came across a message posting from Sandro from a couple of weeks ba= ck that was about providing a libvirt > 1.2.9 for some upstream VDSM testin= g.I would actually be interested in a newer libvirt to take advantage of so= me of the newer capabilities there. For now I've found this repo - https://repos.fedorapeople.org/repos/opensta= ck/.virt-upstream-el7/ - which has libvirt 1.2.11 packages, built as or lat= er December 2014. Are we likely to see a newer libvirt appear for EL7 somewhere on cbs.centos= .org at some stage in the near future?=C2=A0=C2=A0 I'd also be interested i= n newer qemu-kvm-ev packages if these will be built.=C2=A0 I'm currently us= ing the qemu-kvm-ev packages from here - http://cbs.centos.org/repos/virt7-= testing/x86_64/os/Packages/ Alternatively, is there some other repository that I can look to for these?= To preempt the question - I don't want to use Fedora for this and am instea= d hoping to find EL7 packages as EL7 is currently standard in my lab. Thanks in advance. =C2=A0 ------=_Part_1380138_18777795.1430920228532 Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: quoted-printable <html><body><div style=3D"color:#000; background-color:#fff; font-family:He= lvetica Neue-Light, Helvetica Neue Light, Helvetica Neue, Helvetica, Arial,= Lucida Grande, Sans-Serif;font-size:16px"><div id=3D"yui_3_16_0_1_14309197= 84674_2475">Hello.</div><div id=3D"yui_3_16_0_1_1430919784674_2445">I came = across a message posting from Sandro from a couple of weeks back that was a= bout providing a libvirt > 1.2.9 for some upstream VDSM testing.</div><d= iv id=3D"yui_3_16_0_1_1430919784674_2446">I would actually be interested in= a newer libvirt to take advantage of some of the newer capabilities there.= </div><div dir=3D"ltr" id=3D"yui_3_16_0_1_1430919784674_2447"><br>For now I= 've found this repo - <a id=3D"yui_3_16_0_1_1430919784674_2482" href=3D"htt= ps://repos.fedorapeople.org/repos/openstack/.virt-upstream-el7/">https://re= pos.fedorapeople.org/repos/openstack/.virt-upstream-el7/</a> - which has li= bvirt 1.2.11 packages, built as or later December 2014.</div><div id=3D"yui= _3_16_0_1_1430919784674_2469" dir=3D"ltr"><br></div><div id=3D"yui_3_16_0_1= _1430919784674_2483" dir=3D"ltr">Are we likely to see a newer libvirt appea= r for EL7 somewhere on cbs.centos.org at some stage in the near future?&nbs= p;  I'd also be interested in newer qemu-kvm-ev packages if these will= be built.  I'm currently using the qemu-kvm-ev packages from here - <= a id=3D"yui_3_16_0_1_1430919784674_2562" href=3D"http://cbs.centos.org/repo= s/virt7-testing/x86_64/os/Packages/">http://cbs.centos.org/repos/virt7-test= ing/x86_64/os/Packages/</a><br></div><div id=3D"yui_3_16_0_1_1430919784674_= 2553" dir=3D"ltr">Alternatively, is there some other repository that I can = look to for these?</div><div id=3D"yui_3_16_0_1_1430919784674_2528" dir=3D"= ltr">To preempt the question - I don't want to use Fedora for this and am i= nstead hoping to find EL7 packages as EL7 is currently standard in my lab.<= /div><div id=3D"yui_3_16_0_1_1430919784674_2529" dir=3D"ltr"><br></div><div= id=3D"yui_3_16_0_1_1430919784674_2552" dir=3D"ltr">Thanks in advance.</div= ><div id=3D"yui_3_16_0_1_1430919784674_2563" dir=3D"ltr"><br></div><div id= =3D"yui_3_16_0_1_1430919784674_2212"> </div><div id=3D"yui_3_16_0_1_14= 30919784674_2192"><div id=3D"yui_3_16_0_1_1430919784674_2191"> <br></div></div></div></body></html> ------=_Part_1380138_18777795.1430920228532--

3 5

ovirt-webadmin is too slow
by lofyer 06 May '15

06 May '15

This is a MIME message. You may need a MIME compliant mail user agent. --===axigen=8025633375401180711695365449893910585192=axigen=== Content-Type: text/plain Content-Transfer-Encoding: quoted-printable Content-Disposition: inline I've installed ovirt-engine-3.5.1 and created about 120 VMs.Everytime I did= a multi-selection it will take a not-so-short time with not-so-friendly us= er experience(seems to be stuck by something).I'm using Firefox37 in XP wit= h 2GB memory. Will there be some optimization option? --===axigen=8025633375401180711695365449893910585192=axigen=== Content-Type: text/html Content-Transfer-Encoding: quoted-printable Content-Disposition: inline <html dir=3D""><head><style id=3D"axi-htmleditor-style" type=3D"text/css">p= { margin: 0px; }</style></head><body style=3D"font-size: 10pt; font-family= : Arial; background-image: none; background-repeat: repeat; background-atta= chment: fixed;">I've installed ovirt-engine-3.5.1 and created about 120 VMs= .<div>Everytime I did a multi-selection it will take a not-so-short time wi= th not-so-friendly user experience(seems to be stuck by something).</div><d= iv>I'm using Firefox37 in XP with 2GB memory.</div><div><br></div><div>Will= there be some optimization option?</div></body></html> --===axigen=8025633375401180711695365449893910585192=axigen===--

2 1

Re: [ovirt-users] ovirt 3.5.2 cannot start windows vms
by Wolfgang Bucher 06 May '15

06 May '15

This is a multi-part message in MIME format. Your mail reader does not understand MIME message format. --=_3xyiRqkCkkhYcgJDl+RsQz9CJIrostUh4AW1tmkWIpkSRNBD Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: quoted-printable =EF=BB=BFHi=0D=0A=0D=0A=0D=0A=0D=0Asame problem again after reboot. Windo= ws 2012 works.=0D=0A=0D=0A=0D=0A=0D=0AThanks=0D=0A=0D=0A=0D=0A=0D=0AWolfg= ang Bucher=0D=0A=0D=0A-----Urspr=C3=BCngliche Nachricht-----=0D=0AVon: Ia= n Fraser=C2=A0<Ian.Fraser(a)asm.org.uk>=0D=0AGesendet: Mit 6 Mai 2015 15:49= =0D=0AAn: users(a)ovirt.org=0D=0ABetreff: Re: [ovirt-users] ovirt 3.5.2 can= not start windows vms=0D=0A=0D=0A=0D=0AHi,=0D=0AI am also experiencing th= is problem but disabling selinux makes no difference for me. I can only r= un the VM if I "Run once" and add a floppy image. Does anyone else have a= more elegant work around for this=3F=0D=0A=0D=0ABest regards,=0D=0A=0D=0A= Ian Fraser=0D=0A-----Original Message-----=0D=0AFrom: users-bounces@ovirt= =2Eorg [mailto:users-bounces@ovirt.org] On Behalf Of Francesco Romani=0D=0A= Sent: 05 May 2015 16:08=0D=0ATo: Michal Skrivanek=0D=0ACc: users(a)ovirt.or= g (users(a)ovirt.org)=0D=0ASubject: Re: [ovirt-users] ovirt 3.5.2 cannot st= art windows vms=0D=0A=0D=0A----- Original Message -----=0D=0A> From: "Mic= hal Skrivanek" <mskrivan(a)redhat.com>=0D=0A> To: "Francesco Romani" <froma= ni(a)redhat.com>=0D=0A> Cc: "Wolfgang Bucher" <wolfgang.bucher(a)netland-mn.d= e>,=0D=0A> "users(a)ovirt.org (users(a)ovirt.org)" <users(a)ovirt.org>=0D=0A> S= ent: Tuesday, May 5, 2015 9:33:03 AM=0D=0A> Subject: Re: [ovirt-users] ov= irt 3.5.2 cannot start windows vms=0D=0A=0D=0A> >> here are the logfiles = from libvirt=0D=0A> >> May 4 19:08:22 ovirt kernel: ovirtmgmt: port 2(vne= t0) entered=0D=0A> >> forwarding state May 4 19:08:22 ovirt kernel: ovirt= mgmt: port=0D=0A> >> 2(vnet0) entered forwarding state May 4 19:08:23 ovi= rt=0D=0A> >> sanlock[638]: 2015-05-04 19:08:23+0200 5077 [638]:=0D=0A> >>= cmd 9=0D=0A> >> target pid 10182 not found=0D=0A> >> May 4 19:08:23 ovir= t systemd: Starting Virtual Machine qemu-testwin.=0D=0A> >> May 4 19:08:2= 3 ovirt systemd-machined: New machine qemu-testwin.=0D=0A> >> May 4 19:08= :23 ovirt systemd: Started Virtual Machine qemu-testwin.=0D=0A> >> May 4 = 19:08:23 ovirt kvm: 1 guest now active May 4 19:08:23 ovirt=0D=0A> >> ker= nel: ovirtmgmt: port 2(vnet0) entered disabled state May 4=0D=0A> >> 19:0= 8:23 ovirt kernel: device vnet0 left promiscuous mode May 4=0D=0A> >> 19:= 08:23 ovirt kernel: ovirtmgmt: port 2(vnet0) entered disabled=0D=0A> >> s= tate May 4 19:08:23 ovirt kvm: 0 guests now active May 4 19:08:23=0D=0A> = >> ovirt systemd-machined: Machine qemu-testwin terminated.=0D=0A> >> May= 4 19:08:23 ovirt libvirtd: 9183: error : qemuMonitorOpenUnix:309 :=0D=0A= > >> Verbindung mit Monitor-Socket gescheitert: Kein passender Prozess=0D= =0A> >> gefunden May 4 19:08:23 ovirt libvirtd: 9183: error :=0D=0A> >> q= emuProcessWaitForMonitor:2131 :=0D=0A> >> Interner Fehler: Prozess w=C3=A4= hrend der Verbindungsaufnahme zum=0D=0A> >> Monitor beendet=0D=0A> >=0D=0A= > > This is the translation of the well-known 'internal error: monitor=0D= =0A> > disconbected'=0D=0A> > QEMU error (not literal transaltion)! which= is in turn caused by...=0D=0A> >=0D=0A> >> :2015-05-04T17:08:23.274206Z = qemu-kvm: -drive=0D=0A> >> file=3D/var/run/vdsm/payload/c07772b8-6369-44c= f-b554-b8dcb0e0e09b.0a41ac3e81bce0429e32b725fbf3ba5d.img,if=3Dnone,id=3Dd= rive-fdc0-0-0,format=3Draw,serial=3D:=0D=0A> >> could not open disk image= =0D=0A> >> /var/run/vdsm/payload/c07772b8-6369-44cf-b554-b8dcb0e0e09b.0a4= 1ac3e81bce0429e32b725fbf3ba5d.img:=0D=0A> >> Could not open file: Permiss= ion denied=0D=0A> >=0D=0A> > ... this error, and so the root cause seems = indeed very much the=0D=0A> > same of=0D=0A> > https://bugzilla.redhat.co= m/show_bug.cgi=3Fid=3D1213410#c7=0D=0A> >=0D=0A> > because of this:=0D=0A= > >=0D=0A> >> May 4 19:08:23 ovirt libvirtd: 9183: warning :=0D=0A> >> vi= rSecuritySELinuxRestoreSecurityFileLabel:1034 : cannot lookup=0D=0A> >> d= efault selinux label for=0D=0A> >> /rhev/data-center/d5e8a32f-35ed-4dec-b= f9d-3c818c2780a4/66f8876c-089=0D=0A> >> 8-4ff2-9325-a14835f2a872/images/b= 329d34e-78b3-46a5-9df8-00b83c2c982=0D=0A> >> a/c79a596b-5701-4afd-a5b5-d3= 7cf412095c=0D=0A> >=0D=0A> > From the data gathered so far, it seems a se= linux issue.=0D=0A>=0D=0A> This is from Wolfgang's issue or the bug 12134= 10 or is it the same thing=3F=0D=0A=0D=0AFrom Wolfgang's issue, this thre= ad=0D=0A=0D=0A> In the bug the floppy creation failed=0D=0A> In logs atta= ched earlier to this thread it seems the floppy was=0D=0A> created but li= bvirt access failed=0D=0A=0D=0AI believe is the same root cause for bz121= 3410, it was just more hidden=0D=0A=0D=0ABests,=0D=0A=0D=0A--=0D=0AFrance= sco Romani=0D=0ARedHat Engineering Virtualization R & D=0D=0APhone: 82613= 28=0D=0AIRC: fromani=0D=0A_______________________________________________= =0D=0AUsers mailing list=0D=0AUsers@ovirt.org=0D=0Ahttp://lists.ovirt.org= /mailman/listinfo/users=0D=0A=0D=0A______________________________________= ________________________________=0D=0AThis email has been scanned by the = Symantec Email Security.cloud service.=0D=0AFor more information please v= isit http://www.symanteccloud.com _______________________________________= _______________________________=0D=0A=0D=0A______________________________= __=0D=0A=0D=0AThe information in this message and any attachment is inten= ded for the addressee and is confidential. If you are not that addressee,= no action should be taken in reliance on the information and you should = please reply to this message immediately to inform us of incorrect receip= t and destroy this message and any attachments.=0D=0A=0D=0AFor the purpos= es of internet level email security incoming and outgoing emails may be r= ead by personnel other than the named recipient or sender.=0D=0A=0D=0AWhi= lst all reasonable efforts are made, ASM (UK) Ltd cannot guarantee that e= mails and attachments are virus free or compatible with your systems. You= should make your own checks and ASM (UK) Ltd does not accept liability i= n respect of viruses or computer problems experienced.=0D=0ARegistered ad= dress: Agency Sector Management (UK) Ltd. Ashford House, 41-45 Church Roa= d, Ashford, Middlesex, TW15 2TQ=0D=0ARegistered in England No.2053849=0D=0A= =0D=0A___________________________________________________________________= ___=0D=0AThis email has been scanned by the Symantec Email Security.cloud= service.=0D=0AFor more information please visit http://www.symanteccloud= =2Ecom=0D=0A_____________________________________________________________= _________=0D=0A_______________________________________________=0D=0AUsers= mailing list=0D=0AUsers@ovirt.org=0D=0Ahttp://lists.ovirt.org/mailman/li= stinfo/users=0D=0A=0D=0A --=_3xyiRqkCkkhYcgJDl+RsQz9CJIrostUh4AW1tmkWIpkSRNBD Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://ww= w.w3.org/TR/html4/loose.dtd"><html>=0A<head>=0A <meta name=3D"Generator"= content=3D"Zarafa WebApp v7.1.11-46050">=0A <meta http-equiv=3D"Content= -Type" content=3D"text/html; charset=3Dutf-8">=0A <title>AW: [ovirt-user= s] ovirt 3.5.2 cannot start windows vms</title>=0A</head>=0A<body>=0A<p d= ata-mce-style=3D"padding: 0; margin: 0;" style=3D"padding: 0; margin: 0;"= constructor=3D"function Object() { [native code] }" tostring=3D"function= toString() { [native code] }" tolocalestring=3D"function toLocaleString(= ) { [native code] }" propertyisenumerable=3D"function propertyIsEnumerabl= e() { [native code] }" isprototypeof=3D"function isPrototypeOf() { [nativ= e code] }" valueof=3D"function valueOf() { [native code] }" hasownpropert= y=3D"function hasOwnProperty() { [native code] }"><span id=3D"_mce_caret"= data-mce-bogus=3D"true"><span style=3D"font-size: 12pt; font-family: tah= oma, arial, helvetica, sans-serif;" data-mce-style=3D"font-size: 12pt; fo= nt-family: tahoma, arial, helvetica, sans-serif;">=EF=BB=BFHi<br></span><= /span></p><p data-mce-style=3D"padding: 0; margin: 0;" style=3D"padding: = 0; margin: 0;" constructor=3D"function Object() { [native code] }" tostri= ng=3D"function toString() { [native code] }" tolocalestring=3D"function t= oLocaleString() { [native code] }" propertyisenumerable=3D"function prope= rtyIsEnumerable() { [native code] }" isprototypeof=3D"function isPrototyp= eOf() { [native code] }" valueof=3D"function valueOf() { [native code] }"= hasownproperty=3D"function hasOwnProperty() { [native code] }"><span sty= le=3D"font-size: 12pt; font-family: tahoma, arial, helvetica, sans-serif;= " data-mce-style=3D"font-size: 12pt; font-family: tahoma, arial, helvetic= a, sans-serif;"><br data-mce-bogus=3D"1"></span></p><p data-mce-style=3D"= padding: 0; margin: 0;" style=3D"padding: 0; margin: 0;" constructor=3D"f= unction Object() { [native code] }" tostring=3D"function toString() { [na= tive code] }" tolocalestring=3D"function toLocaleString() { [native code]= }" propertyisenumerable=3D"function propertyIsEnumerable() { [native cod= e] }" isprototypeof=3D"function isPrototypeOf() { [native code] }" valueo= f=3D"function valueOf() { [native code] }" hasownproperty=3D"function has= OwnProperty() { [native code] }"><span style=3D"font-size: 12pt; font-fam= ily: tahoma, arial, helvetica, sans-serif;" data-mce-style=3D"font-size: = 12pt; font-family: tahoma, arial, helvetica, sans-serif;">same problem ag= ain after reboot. Windows 2012 works.</span></p><p data-mce-style=3D"padd= ing: 0; margin: 0;" style=3D"padding: 0; margin: 0;" constructor=3D"funct= ion Object() { [native code] }" tostring=3D"function toString() { [native= code] }" tolocalestring=3D"function toLocaleString() { [native code] }" = propertyisenumerable=3D"function propertyIsEnumerable() { [native code] }= " isprototypeof=3D"function isPrototypeOf() { [native code] }" valueof=3D= "function valueOf() { [native code] }" hasownproperty=3D"function hasOwnP= roperty() { [native code] }"><span style=3D"font-size: 12pt; font-family:= tahoma, arial, helvetica, sans-serif;" data-mce-style=3D"font-size: 12pt= ; font-family: tahoma, arial, helvetica, sans-serif;"><br data-mce-bogus=3D= "1"></span></p><p data-mce-style=3D"padding: 0; margin: 0;" style=3D"padd= ing: 0; margin: 0;" constructor=3D"function Object() { [native code] }" t= ostring=3D"function toString() { [native code] }" tolocalestring=3D"funct= ion toLocaleString() { [native code] }" propertyisenumerable=3D"function = propertyIsEnumerable() { [native code] }" isprototypeof=3D"function isPro= totypeOf() { [native code] }" valueof=3D"function valueOf() { [native cod= e] }" hasownproperty=3D"function hasOwnProperty() { [native code] }"><spa= n style=3D"font-size: 12pt; font-family: tahoma, arial, helvetica, sans-s= erif;" data-mce-style=3D"font-size: 12pt; font-family: tahoma, arial, hel= vetica, sans-serif;">Thanks</span></p><p data-mce-style=3D"padding: 0; ma= rgin: 0;" style=3D"padding: 0; margin: 0;" constructor=3D"function Object= () { [native code] }" tostring=3D"function toString() { [native code] }" = tolocalestring=3D"function toLocaleString() { [native code] }" propertyis= enumerable=3D"function propertyIsEnumerable() { [native code] }" isprotot= ypeof=3D"function isPrototypeOf() { [native code] }" valueof=3D"function = valueOf() { [native code] }" hasownproperty=3D"function hasOwnProperty() = { [native code] }"><span style=3D"font-size: 12pt; font-family: tahoma, a= rial, helvetica, sans-serif;" data-mce-style=3D"font-size: 12pt; font-fam= ily: tahoma, arial, helvetica, sans-serif;"><br data-mce-bogus=3D"1"></sp= an></p><p data-mce-style=3D"padding: 0; margin: 0;" style=3D"padding: 0; = margin: 0;" constructor=3D"function Object() { [native code] }" tostring=3D= "function toString() { [native code] }" tolocalestring=3D"function toLoca= leString() { [native code] }" propertyisenumerable=3D"function propertyIs= Enumerable() { [native code] }" isprototypeof=3D"function isPrototypeOf()= { [native code] }" valueof=3D"function valueOf() { [native code] }" haso= wnproperty=3D"function hasOwnProperty() { [native code] }"><span style=3D= "font-size: 12pt; font-family: tahoma, arial, helvetica, sans-serif;" dat= a-mce-style=3D"font-size: 12pt; font-family: tahoma, arial, helvetica, sa= ns-serif;">Wolfgang Bucher</span></p><blockquote style=3D"border-left: 2p= x solid #325FBA; padding-left: 5px; margin: 0px 5px;"><span style=3D"font= -family:tahoma,arial,helvetica,sans-serif; font-size: 10pt;">-----Urspr=C3= =BCngliche Nachricht-----<br><span><strong>Von:</strong> Ian Fraser = <Ian.Fraser(a)asm.org.uk></span><br><span><strong>Gesendet:</strong> = Mit 6 Mai 2015 15:49</span><br><span><strong>An:</strong> users(a)ovirt.org= </span><br><span><strong>Betreff:</strong> Re: [ovirt-users] ovirt 3.5.2 = cannot start windows vms</span><br><br></span><div><pre wrap=3D"" style=3D= "white-space: -moz-pre-wrap; white-space: -pre-wrap; white-space: -o-pre-= wrap; white-space: pre-wrap; word-wrap: break-word;">Hi,<br>I am also exp= eriencing this problem but disabling selinux makes no difference for me. = I can only run the VM if I "Run once" and add a floppy image. Does anyone= else have a more elegant work around for this=3F<br><br>Best regards,<br= ><br>Ian Fraser<br>-----Original Message-----<br>From: users-bounces@ovir= t.org [mailto:users-bounces@ovirt.org] On Behalf Of Francesco Romani<br>S= ent: 05 May 2015 16:08<br>To: Michal Skrivanek<br>Cc: users(a)ovirt.org (us= ers(a)ovirt.org)<br>Subject: Re: [ovirt-users] ovirt 3.5.2 cannot start win= dows vms<br><br>----- Original Message -----<br>> From: "Michal Skriva= nek" <mskrivan(a)redhat.com><br>> To: "Francesco Romani" <froma= ni(a)redhat.com><br>> Cc: "Wolfgang Bucher" <wolfgang.bucher@netla= nd-mn.de>,<br>> "users(a)ovirt.org (users(a)ovirt.org)" <users@ovirt= =2Eorg><br>> Sent: Tuesday, May 5, 2015 9:33:03 AM<br>> Subject:= Re: [ovirt-users] ovirt 3.5.2 cannot start windows vms<br><br>> >&= gt; here are the logfiles from libvirt<br>> >> May 4 19:08:22 ov= irt kernel: ovirtmgmt: port 2(vnet0) entered<br>> >> forwarding = state May 4 19:08:22 ovirt kernel: ovirtmgmt: port<br>> >> 2(vne= t0) entered forwarding state May 4 19:08:23 ovirt<br>> >> sanloc= k[638]: 2015-05-04 19:08:23+0200 5077 [638]:<br>> >> cmd 9<br>&g= t; >> target pid 10182 not found<br>> >> May 4 19:08:23 ov= irt systemd: Starting Virtual Machine qemu-testwin.<br>> >> May = 4 19:08:23 ovirt systemd-machined: New machine qemu-testwin.<br>> >= > May 4 19:08:23 ovirt systemd: Started Virtual Machine qemu-testwin.<= br>> >> May 4 19:08:23 ovirt kvm: 1 guest now active May 4 19:08= :23 ovirt<br>> >> kernel: ovirtmgmt: port 2(vnet0) entered disab= led state May 4<br>> >> 19:08:23 ovirt kernel: device vnet0 left= promiscuous mode May 4<br>> >> 19:08:23 ovirt kernel: ovirtmgmt= : port 2(vnet0) entered disabled<br>> >> state May 4 19:08:23 ov= irt kvm: 0 guests now active May 4 19:08:23<br>> >> ovirt system= d-machined: Machine qemu-testwin terminated.<br>> >> May 4 19:08= :23 ovirt libvirtd: 9183: error : qemuMonitorOpenUnix:309 :<br>> >&= gt; Verbindung mit Monitor-Socket gescheitert: Kein passender Prozess<br>= > >> gefunden May 4 19:08:23 ovirt libvirtd: 9183: error :<br>&g= t; >> qemuProcessWaitForMonitor:2131 :<br>> >> Interner Fe= hler: Prozess w=C3=A4hrend der Verbindungsaufnahme zum<br>> >> M= onitor beendet<br>> ><br>> > This is the translation of the w= ell-known 'internal error: monitor<br>> > disconbected'<br>> &gt= ; QEMU error (not literal transaltion)! which is in turn caused by...<br>= > ><br>> >> :2015-05-04T17:08:23.274206Z qemu-kvm: -drive<= br>> >> file=3D/var/run/vdsm/payload/c07772b8-6369-44cf-b554-b8d= cb0e0e09b.0a41ac3e81bce0429e32b725fbf3ba5d.img,if=3Dnone,id=3Ddrive-fdc0-= 0-0,format=3Draw,serial=3D:<br>> >> could not open disk image<br= >> >> /var/run/vdsm/payload/c07772b8-6369-44cf-b554-b8dcb0e0e09b= =2E0a41ac3e81bce0429e32b725fbf3ba5d.img:<br>> >> Could not open = file: Permission denied<br>> ><br>> > ... this error, and so = the root cause seems indeed very much the<br>> > same of<br>> &g= t; https://bugzilla.redhat.com/show_bug.cgi=3Fid=3D1213410#c7<br>> &gt= ;<br>> > because of this:<br>> ><br>> >> May 4 19:08= :23 ovirt libvirtd: 9183: warning :<br>> >> virSecuritySELinuxRe= storeSecurityFileLabel:1034 : cannot lookup<br>> >> default seli= nux label for<br>> >> /rhev/data-center/d5e8a32f-35ed-4dec-bf9d-= 3c818c2780a4/66f8876c-089<br>> >> 8-4ff2-9325-a14835f2a872/image= s/b329d34e-78b3-46a5-9df8-00b83c2c982<br>> >> a/c79a596b-5701-4a= fd-a5b5-d37cf412095c<br>> ><br>> > From the data gathered so = far, it seems a selinux issue.<br>><br>> This is from Wolfgang's is= sue or the bug 1213410 or is it the same thing=3F<br><br>From Wolfgang's = issue, this thread<br><br>> In the bug the floppy creation failed<br>&= gt; In logs attached earlier to this thread it seems the floppy was<br>&g= t; created but libvirt access failed<br><br>I believe is the same root ca= use for bz1213410, it was just more hidden<br><br>Bests,<br><br>--<br>Fra= ncesco Romani<br>RedHat Engineering Virtualization R & D<br>Phone: 82= 61328<br>IRC: fromani<br>_______________________________________________<= br>Users mailing list<br>Users(a)ovirt.org<br>http://lists.ovirt.org/mailma= n/listinfo/users<br><br>_________________________________________________= _____________________<br>This email has been scanned by the Symantec Emai= l Security.cloud service.<br>For more information please visit http://www= =2Esymanteccloud.com ____________________________________________________= __________________<br><br>________________________________<br><br>The inf= ormation in this message and any attachment is intended for the addressee= and is confidential. If you are not that addressee, no action should be = taken in reliance on the information and you should please reply to this = message immediately to inform us of incorrect receipt and destroy this me= ssage and any attachments.<br><br>For the purposes of internet level emai= l security incoming and outgoing emails may be read by personnel other th= an the named recipient or sender.<br><br>Whilst all reasonable efforts ar= e made, ASM (UK) Ltd cannot guarantee that emails and attachments are vir= us free or compatible with your systems. You should make your own checks = and ASM (UK) Ltd does not accept liability in respect of viruses or compu= ter problems experienced.<br>Registered address: Agency Sector Management= (UK) Ltd. Ashford House, 41-45 Church Road, Ashford, Middlesex, TW15 2TQ= <br>Registered in England No.2053849<br><br>_____________________________= _________________________________________<br>This email has been scanned = by the Symantec Email Security.cloud service.<br>For more information ple= ase visit http://www.symanteccloud.com<br>_______________________________= _______________________________________<br>______________________________= _________________<br>Users mailing list<br>Users(a)ovirt.org<br>http://list= s.ovirt.org/mailman/listinfo/users<br></pre></div></blockquote>=0A</body>= =0A</html> --=_3xyiRqkCkkhYcgJDl+RsQz9CJIrostUh4AW1tmkWIpkSRNBD--

1 0

[QE][VOTE][ACTION REQUIRED] oVirt 3.6.0 Alpha release this week
by Sandro Bonazzola 06 May '15

06 May '15

Hi, just a quick reminder that oVirt 3.6.0 Alpha is scheduled for May 6th[1]. ACTION: Maintainers, please check Alpha Release Criteria[2] to ensure we can release this Alpha on Wednesday. MUST: All sources must be available on ovirt.org MUST: All packages listed by subprojects must be available in the repository MUST: All accepted features must be substantially complete and in a testable state and enabled by default -- if so specified by the change About this last "MUST" I think that we should drop it having changed the release process after release criteria discussion and move it to beta release criteria. VOTE: please ack for moving "MUST: All accepted features must be substantially complete and in a testable state and enabled by default -- if so specified by the change" to beta release criteria ACTION: Maintainers: please send a list of the packages provided by your sub-project. If no list will be provided, the list will be taken by the jenkins nightly publisher job[3] used for publishing ovirt-master-snapshot. ACTION: Maintainers and QE: please fill the Test Day wiki page[4] [1] http://www.ovirt.org/OVirt_3.6_Release_Management#Key_Milestones [2] http://www.ovirt.org/OVirt_3.6_Release_Management#Alpha_Release_Criteria [3] http://jenkins.ovirt.org/view/Publishers/job/publish_ovirt_rpms_nightly_mas… [4] http://www.ovirt.org/OVirt_3.6_Test_Day -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

8 12