- Users - oVirt List Archives

Selecting which host to run a VM on using ovirt-shell
by Joop 28 May '14

28 May '14

Hi List, As per the subject, I have a desire to start a lot of VMs after a maintenance shutdown of our infrastructure and I would like to either evenly spread the load among the hosts or to restart the VMs on the host they were on before shutdown. Getting the list using ovirt-shell and transforming that to a 'action vm ABC start' is no problem but I can't find if its possible to specify the host to run the VM on. Is this possible using ovirt-shell and can someone point me to some docs? (Have read (all) the rhevm docs but either overlooked or its not there) Regards, Joop

2 3

Re: [ovirt-users] Server 2012 R2 no drive found
by Neil 28 May '14

28 May '14

Hi Rene, Thanks for testing this out. It seems I'm doing the exact same thing, but I don't get any IDE drive showing, and again when I try using the virtio from the same link for the virtio drivers using the same directory from Win8 AMD64 it lists the virtio-scsi pass through as a compatible driver, but if you click "Next" to install, it says "No new device drivers were found. Make sure the media contains the correct drivers, and then click OK" Attached is a screenshot showing the error... So if I go and change my disks to virtio, virtio-scsi, or IDE under "disks --> edit" I get the same result. I've also right clicked on the VM, gone to advanced, resources and then enabled or disabled "Virtio-SCSI enabled". Something really doesn't seem right. When you create a VM, have you got the option to choose 2012 R2, or do you also only have 2012 showing in the list of operating systems? Thank you so much. Regards. Neil Wilson. On Wed, May 28, 2014 at 4:43 PM, René Koch <rkoch(a)linuxland.at> wrote: > On 05/28/2014 02:45 PM, Neil wrote: >> >> Thank you Rene, greatly appreciated. > > > No problem. > > >> >> I'm using the Server 2012 R2 Standard edition and at this point I >> haven't even got a NIC added to the VM. > > > I installed Server 2012 R2 Standard as well. > > >> >> Another piece of info which might be useful (or not) is I'm using a FC >> SAN for storage, not sure if this would have any affect. > > > This shouldn't have an effect. I have oVirt/RHEV running/installed on > RC/iSCSI/NFS/GlusterFS and local storage and it never had an influence on > virtual disks. > > > Here are my findings from 2 installation tests: > > - IDE works fine out of the box - installer detects the hard drive and I can > install on this disk (see attached screenshot) > > - VirtIO works fine if you use the drivers from linux-kvm.org but it's a bit > tricky as there's no virtual floppy disk (vfd) and oVirt only has 1 virtual > CD drive: > > 1. Download > http://alt.fedoraproject.org/pub/alt/virtio-win/latest/images/virtio-win-0.… > to your ISO domain > 2. Start installation of Windows Server 2012 R2 by booting from Windows > Server ISO > 3. As no disk is detected choose Load driver > 4. In webadmin change cd to virtio-win-0.1-74.iso > 5. In Windows installer use Windows8/amd64 drivers (select all drivers which > are detected on cd) > 6. Change cd to Windows Server 2012 R2 ISO and click on Refresh in Windows > disk setup dialog (Installer displays the disk but complains that it can't > install on this disk because the Windows Server ISO isn't inserted) > > > So as a conclusion: > You can install Server 2012 R2 without driver disk from RHEL supplementary > channel (and therefor without a valid RHEL subscription), but you have to > choose drivers for Windows 8, as there are no official drivers available for > Server 2012 (or at least I couldn't find them). > > > I hope this helps. > > > Regards, > René > > >> >> Thanks. >> >> Regards. >> >> Neil Wilson. >> >> >> On Wed, May 28, 2014 at 2:42 PM, René Koch <rkoch(a)linuxland.at> wrote: >>> >>> Hi Neil, >>> >>> I'll test Windows Server 2012 R2 again with IDE and VirtIO disks (and >>> e1000 >>> and VirtIO network cards) with VirtIO-drivers from RHEL channel and >>> drivers >>> bundles with spice guest agent and will let you know the results. Please >>> keep in mind that it will take some time... >>> Btw, I will use Windows 2012 R2 english, 180-days trial... >>> >>> >>> Regards, >>> René >>> >>> >>> >>> On 05/28/2014 01:11 PM, Neil wrote: >>>> >>>> >>>> Hi guys, >>>> >>>> Is anyone able to assist here? I still can't install 2012 R2, whether >>>> I use IDE, virtio, or virtio-scsi, I don't see a drive during the >>>> first install. >>>> >>>> I've tried the "virtio-win-1.6.8/vioserial/2k12R2/amd64" as a test and >>>> this also doesn't work, so it doesn't seem like a driver issue, more >>>> of a cluster issue. >>>> >>>> I've also tried changing my Datacenter compatibility and Cluster to >>>> 3.4, but this seemed to make no difference. Both my hosts are upgraded >>>> to Centos 6.5 all updates, as well as my ovirt and VDSM is updated to >>>> the latest stable 3.4 packages. >>>> >>>> I'm at a loss here, but desperately need to get this R2 installed. >>>> >>>> Further to what Paul mentioned below, this was upgraded from 3.1 so it >>>> doesn't just appear to happen to new 3.4 installs. >>>> >>>> Any help is greatly appreciated. >>>> >>>> On Mon, May 26, 2014 at 12:45 PM, Neil <nwilson123(a)gmail.com> wrote: >>>>> >>>>> >>>>> Hi guys, >>>>> >>>>> Thanks for the replies. >>>>> >>>>> What's strange is that even when choosing an IDE disk I don't see any >>>>> hard drive showing up when I try to install 2012R2, is this normal? I >>>>> can understand why R2 won't see the virtio scsi disk, but to me it >>>>> should be showing up when using IDE, or am I wrong here? >>>>> >>>>> I see that in the virtio drivers from RHEL supplementary there is a >>>>> folder "virtio-win-1.6.8/vioserial/2k12R2/amd64" but the license seems >>>>> to indicate that you need a valid subscription in order to use these >>>>> drivers... if this is true then is no one using server 2012 R2 on >>>>> oVirt without a valid subscription? >>>>> >>>>> I see with the drivers from >>>>> "http://alt.fedoraproject.org/pub/alt/virtio-win/latest/images/src/" >>>>> there is only a Win8 driver, and trying to use this on my 2012 R2 >>>>> doesn't find a matching driver. >>>>> >>>>> Can anyone clarify this from Redhat? If you using RHEV, presumably you >>>>> can use R2, but it seems using oVirt you aren't allowed to? >>>>> >>>>> Thanks. >>>>> >>>>> Regards. >>>>> >>>>> Neil Wilson. >>>>> >>>>> >>>>> >>>>> On Fri, May 23, 2014 at 10:40 PM, Paul.LKW <paul.lkw(a)gmail.com> wrote: >>>>>> >>>>>> >>>>>> Hi guys: >>>>>> Please do not just say your one is working it is helpless in fact >>>>>> there >>>>>> already some guys reported issues in Win platform (including me) and >>>>>> there >>>>>> is no way to report that, do your think paid version in Redhat would >>>>>> be >>>>>> the >>>>>> same or the client will already fxxked. >>>>>> I noted this seems occured only in newly installed ovirt and old >>>>>> installation is fine. >>>>>> >>>>>> Paul.LKW >>>>>> >>>>>> 於 2014/5/23 下午11:02，"Neil" <nwilson123(a)gmail.com> 寫道： >>>>>>> >>>>>>> >>>>>>> >>>>>>> Hi guys, >>>>>>> >>>>>>> I've been trying to install 2012 R2 onto my ovirt 3.4 but no matter >>>>>>> what I do, it either doesn't find an IDE drive or a Virtio drive >>>>>>> (when >>>>>>> using the virtio ISO). >>>>>>> >>>>>>> ovirt-engine-lib-3.4.0-1.el6.noarch >>>>>>> ovirt-engine-restapi-3.4.0-1.el6.noarch >>>>>>> ovirt-engine-setup-plugin-ovirt-engine-3.4.0-1.el6.noarch >>>>>>> ovirt-engine-3.4.0-1.el6.noarch >>>>>>> ovirt-engine-setup-plugin-websocket-proxy-3.4.0-1.el6.noarch >>>>>>> ovirt-host-deploy-java-1.2.0-1.el6.noarch >>>>>>> ovirt-engine-cli-3.2.0.10-1.el6.noarch >>>>>>> ovirt-engine-setup-3.4.0-1.el6.noarch >>>>>>> ovirt-host-deploy-1.2.0-1.el6.noarch >>>>>>> ovirt-engine-backend-3.4.0-1.el6.noarch >>>>>>> ovirt-image-uploader-3.4.0-1.el6.noarch >>>>>>> ovirt-engine-tools-3.4.0-1.el6.noarch >>>>>>> ovirt-engine-sdk-python-3.4.0.7-1.el6.noarch >>>>>>> ovirt-engine-webadmin-portal-3.4.0-1.el6.noarch >>>>>>> ovirt-engine-setup-base-3.4.0-1.el6.noarch >>>>>>> ovirt-iso-uploader-3.4.0-1.el6.noarch >>>>>>> ovirt-engine-userportal-3.4.0-1.el6.noarch >>>>>>> ovirt-log-collector-3.4.1-1.el6.noarch >>>>>>> ovirt-engine-websocket-proxy-3.4.0-1.el6.noarch >>>>>>> ovirt-engine-setup-plugin-ovirt-engine-common-3.4.0-1.el6.noarch >>>>>>> ovirt-engine-dbscripts-3.4.0-1.el6.noarch >>>>>>> >>>>>>> vdsm-4.14.6-0.el6.x86_64 >>>>>>> vdsm-xmlrpc-4.14.6-0.el6.noarch >>>>>>> vdsm-cli-4.14.6-0.el6.noarch >>>>>>> vdsm-python-zombiereaper-4.14.6-0.el6.noarch >>>>>>> vdsm-python-4.14.6-0.el6.x86_64 >>>>>>> >>>>>>> qemu-img-0.12.1.2-2.415.el6_5.8.x86_64 >>>>>>> qemu-kvm-tools-0.12.1.2-2.415.el6_5.8.x86_64 >>>>>>> qemu-kvm-0.12.1.2-2.415.el6_5.8.x86_64 >>>>>>> gpxe-roms-qemu-0.9.7-6.9.el6.noarch >>>>>>> >>>>>>> Is there a special trick to get this working, or could something be >>>>>>> wrong? When it comes to creating a guest I don't see a Server 2012 R2 >>>>>>> 64bit in the drop down list? >>>>>>> >>>>>>> Thanks. >>>>>>> >>>>>>> Regards. >>>>>>> >>>>>>> Neil Wilson. >>>>>>> _______________________________________________ >>>>>>> Users mailing list >>>>>>> Users(a)ovirt.org >>>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>> >>>> >>>> _______________________________________________ >>>> Users mailing list >>>> Users(a)ovirt.org >>>> http://lists.ovirt.org/mailman/listinfo/users >>>> >>> >

2 2

Persisting glusterfs configs on an oVirt node
by Simon Barrett 28 May '14

28 May '14

--_000_D86C48DF8800164BBE50B87623F7AC954836B051ln2wio001devtra_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable I am working through the setup of oVirt node for a 3.4.1 deployment. I setup some glusterfs volumes/bricks on oVirt Node Hypervisor release 3.0.= 4 (1.0.201401291204.el6) and created a storage domain. All was working OK u= ntil I rebooted the node and found that the glusterfs configuration had not= been retained. Is there something I should be doing to persist any glusterfs configuration= so it survives a node reboot? Many thanks, Simon --_000_D86C48DF8800164BBE50B87623F7AC954836B051ln2wio001devtra_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <meta name=3D"Generator" content=3D"Microsoft Word 15 (filtered medium)"> <style></style> </head> <body lang=3D"EN-GB" link=3D"#0563C1" vlink=3D"#954F72"> <div class=3D"WordSection1"> I am working through the setup of oVirt node for a 3= .4.1 deployment.<o:p></o:p> <o:p> </o:p> I setup some glusterfs volumes/bricks on oVirt Node = Hypervisor release 3.0.4 (1.0.201401291204.el6) and created a storage domai= n. All was working OK until I rebooted the node and found that the glusterf= s configuration had not been retained.<o:p></o:p> <o:p> </o:p> Is there something I should be doing to persist any = glusterfs configuration so it survives a node reboot?<o:p></o:p> <o:p> </o:p> Many thanks,<o:p></o:p> <o:p> </o:p> Simon<o:p></o:p> <o:p> </o:p> </div> </body> </html> --_000_D86C48DF8800164BBE50B87623F7AC954836B051ln2wio001devtra_--

4 12

Re: [ovirt-users] Server 2012 R2 no drive found
by Neil 28 May '14

28 May '14

Thank you Rene, greatly appreciated. I'm using the Server 2012 R2 Standard edition and at this point I haven't even got a NIC added to the VM. Another piece of info which might be useful (or not) is I'm using a FC SAN for storage, not sure if this would have any affect. Thanks. Regards. Neil Wilson. On Wed, May 28, 2014 at 2:42 PM, René Koch <rkoch(a)linuxland.at> wrote: > Hi Neil, > > I'll test Windows Server 2012 R2 again with IDE and VirtIO disks (and e1000 > and VirtIO network cards) with VirtIO-drivers from RHEL channel and drivers > bundles with spice guest agent and will let you know the results. Please > keep in mind that it will take some time... > Btw, I will use Windows 2012 R2 english, 180-days trial... > > > Regards, > René > > > > On 05/28/2014 01:11 PM, Neil wrote: >> >> Hi guys, >> >> Is anyone able to assist here? I still can't install 2012 R2, whether >> I use IDE, virtio, or virtio-scsi, I don't see a drive during the >> first install. >> >> I've tried the "virtio-win-1.6.8/vioserial/2k12R2/amd64" as a test and >> this also doesn't work, so it doesn't seem like a driver issue, more >> of a cluster issue. >> >> I've also tried changing my Datacenter compatibility and Cluster to >> 3.4, but this seemed to make no difference. Both my hosts are upgraded >> to Centos 6.5 all updates, as well as my ovirt and VDSM is updated to >> the latest stable 3.4 packages. >> >> I'm at a loss here, but desperately need to get this R2 installed. >> >> Further to what Paul mentioned below, this was upgraded from 3.1 so it >> doesn't just appear to happen to new 3.4 installs. >> >> Any help is greatly appreciated. >> >> On Mon, May 26, 2014 at 12:45 PM, Neil <nwilson123(a)gmail.com> wrote: >>> >>> Hi guys, >>> >>> Thanks for the replies. >>> >>> What's strange is that even when choosing an IDE disk I don't see any >>> hard drive showing up when I try to install 2012R2, is this normal? I >>> can understand why R2 won't see the virtio scsi disk, but to me it >>> should be showing up when using IDE, or am I wrong here? >>> >>> I see that in the virtio drivers from RHEL supplementary there is a >>> folder "virtio-win-1.6.8/vioserial/2k12R2/amd64" but the license seems >>> to indicate that you need a valid subscription in order to use these >>> drivers... if this is true then is no one using server 2012 R2 on >>> oVirt without a valid subscription? >>> >>> I see with the drivers from >>> "http://alt.fedoraproject.org/pub/alt/virtio-win/latest/images/src/" >>> there is only a Win8 driver, and trying to use this on my 2012 R2 >>> doesn't find a matching driver. >>> >>> Can anyone clarify this from Redhat? If you using RHEV, presumably you >>> can use R2, but it seems using oVirt you aren't allowed to? >>> >>> Thanks. >>> >>> Regards. >>> >>> Neil Wilson. >>> >>> >>> >>> On Fri, May 23, 2014 at 10:40 PM, Paul.LKW <paul.lkw(a)gmail.com> wrote: >>>> >>>> Hi guys: >>>> Please do not just say your one is working it is helpless in fact there >>>> already some guys reported issues in Win platform (including me) and >>>> there >>>> is no way to report that, do your think paid version in Redhat would be >>>> the >>>> same or the client will already fxxked. >>>> I noted this seems occured only in newly installed ovirt and old >>>> installation is fine. >>>> >>>> Paul.LKW >>>> >>>> 於 2014/5/23 下午11:02，"Neil" <nwilson123(a)gmail.com> 寫道： >>>>> >>>>> >>>>> Hi guys, >>>>> >>>>> I've been trying to install 2012 R2 onto my ovirt 3.4 but no matter >>>>> what I do, it either doesn't find an IDE drive or a Virtio drive (when >>>>> using the virtio ISO). >>>>> >>>>> ovirt-engine-lib-3.4.0-1.el6.noarch >>>>> ovirt-engine-restapi-3.4.0-1.el6.noarch >>>>> ovirt-engine-setup-plugin-ovirt-engine-3.4.0-1.el6.noarch >>>>> ovirt-engine-3.4.0-1.el6.noarch >>>>> ovirt-engine-setup-plugin-websocket-proxy-3.4.0-1.el6.noarch >>>>> ovirt-host-deploy-java-1.2.0-1.el6.noarch >>>>> ovirt-engine-cli-3.2.0.10-1.el6.noarch >>>>> ovirt-engine-setup-3.4.0-1.el6.noarch >>>>> ovirt-host-deploy-1.2.0-1.el6.noarch >>>>> ovirt-engine-backend-3.4.0-1.el6.noarch >>>>> ovirt-image-uploader-3.4.0-1.el6.noarch >>>>> ovirt-engine-tools-3.4.0-1.el6.noarch >>>>> ovirt-engine-sdk-python-3.4.0.7-1.el6.noarch >>>>> ovirt-engine-webadmin-portal-3.4.0-1.el6.noarch >>>>> ovirt-engine-setup-base-3.4.0-1.el6.noarch >>>>> ovirt-iso-uploader-3.4.0-1.el6.noarch >>>>> ovirt-engine-userportal-3.4.0-1.el6.noarch >>>>> ovirt-log-collector-3.4.1-1.el6.noarch >>>>> ovirt-engine-websocket-proxy-3.4.0-1.el6.noarch >>>>> ovirt-engine-setup-plugin-ovirt-engine-common-3.4.0-1.el6.noarch >>>>> ovirt-engine-dbscripts-3.4.0-1.el6.noarch >>>>> >>>>> vdsm-4.14.6-0.el6.x86_64 >>>>> vdsm-xmlrpc-4.14.6-0.el6.noarch >>>>> vdsm-cli-4.14.6-0.el6.noarch >>>>> vdsm-python-zombiereaper-4.14.6-0.el6.noarch >>>>> vdsm-python-4.14.6-0.el6.x86_64 >>>>> >>>>> qemu-img-0.12.1.2-2.415.el6_5.8.x86_64 >>>>> qemu-kvm-tools-0.12.1.2-2.415.el6_5.8.x86_64 >>>>> qemu-kvm-0.12.1.2-2.415.el6_5.8.x86_64 >>>>> gpxe-roms-qemu-0.9.7-6.9.el6.noarch >>>>> >>>>> Is there a special trick to get this working, or could something be >>>>> wrong? When it comes to creating a guest I don't see a Server 2012 R2 >>>>> 64bit in the drop down list? >>>>> >>>>> Thanks. >>>>> >>>>> Regards. >>>>> >>>>> Neil Wilson. >>>>> _______________________________________________ >>>>> Users mailing list >>>>> Users(a)ovirt.org >>>>> http://lists.ovirt.org/mailman/listinfo/users >> >> _______________________________________________ >> Users mailing list >> Users(a)ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >

2 1

Re: [ovirt-users] Removing VM disk issue (Solved)
by Neil 28 May '14

28 May '14

Thanks Maor and Koen, Koen: I tried the engine restart and vdsm restart, but that didn't work unfortunately. Maor: I ran... psql -U postgres engine then... UPDATE images set imagestatus = 1 where image_guid = (SELECT image_guid from all_disks where disk_alias = 'proxy02_Disk0' and vm_names ='proxy02'); UPDATE 1 This then unlocked the disk and it allowed me to remove the entire VM and disk thereafter. Thank you very much for your assistance. Kind regard. Neil Wilson. On Wed, May 28, 2014 at 3:18 PM, Koen Vanoppen <vanoppen.koen(a)gmail.com> wrote: > We have this same issue also once in a while. Most of the times it is solved > by just restarting the ovirt engine. If this doesn't work, try to restart > your vdsm service. > > Kind regards > > > 2014-05-26 10:07 GMT+02:00 Maor Lipchuk <mlipchuk(a)redhat.com>: > >> On 05/19/2014 05:57 PM, Neil wrote: >> > Hi Maor, >> > >> > Sorry for the late reply. >> > >> > Unfortunately I don't have much in the way of older logs, but can >> > confirm that the VM has been shutdown for about 3 months so there >> > really shouldn't be any tasks running. >> > >> > My version is ovirt-engine-3.3.3-2.el6.noarch >> > >> > I presume running the command won't have any affect on any other VM's >> > so it should be safe to do this? >> hi Neil, >> >> The command should not affect other VMs (Make sure to run the command >> with "vm_names ='proxy02'"). >> >> Just to be sure use SELECT before running the command to check that only >> one image is returned: >> SELECT * FROM images where image_guid = (SELECT image_guid from >> all_disks where disk_alias = 'proxy02_Disk0' and vm_names ='proxy02'); >> > >> > Thank you! >> > >> > Regards. >> > >> > Neil Wilson. >> > >> > >> > On Thu, May 15, 2014 at 11:52 AM, Maor Lipchuk <mlipchuk(a)redhat.com> >> > wrote: >> >> Hi Neil, >> >> >> >> I have been looking at your logs but it seems that there is no >> >> indication of any operation being done on this specific disk. >> >> I also see that there are no running tasks in VDSM, so the disk should >> >> not be locked. >> >> >> >> If you have any older engine logs please send them so we can >> >> investigate >> >> the problem more better. >> >> >> >> What is the engine version you are running? >> >> >> >> If you want to unlock the disk, you can run this query in your >> >> postgres: >> >> UPDATE images set imagestatus = 1 where image_guid = (SELECT image_guid >> >> from all_disks where disk_alias = 'proxy02_Disk0' and vm_names >> >> ='proxy02'); >> >> >> >> regards, >> >> Maor >> >> >> >> On 05/14/2014 05:30 PM, Neil wrote: >> >>> Hi Maor, >> >>> >> >>> Attached are the logs, and below is a screenshot of the event log, I >> >>> removed the two disks that were attached to the proxy previously which >> >>> completed. >> >>> >> >>> Thank you! >> >>> >> >>> Regards. >> >>> >> >>> Neil Wilson. >> >>> >> >>> >> >>> >> >>> On Wed, May 14, 2014 at 2:43 PM, Maor Lipchuk <mlipchuk(a)redhat.com> >> >>> wrote: >> >>>> Hi Neil, >> >>>> >> >>>> Can u please attach the logs of engine and VDSM. >> >>>> What there is in the event log, was there any operation being done on >> >>>> the disk before? >> >>>> >> >>>> regards, >> >>>> Maor >> >>>> >> >>>> On 05/14/2014 03:35 PM, Neil wrote: >> >>>>> Hi guys, >> >>>>> >> >>>>> I'm trying to remove a VM and reclaim the space that the VM was >> >>>>> using. >> >>>>> This particular VM had a thin provisioned disk attached as well as >> >>>>> "fat" provisioned, the "fat" disks I managed to detach, however when >> >>>>> I >> >>>>> try to remove the VM, it says "The following disks are locked: >> >>>>> Please >> >>>>> try again in a few minutes. Attached is a screenshot from the GUI >> >>>>> side, showing the proxy disk being locked, any ideas? >> >>>>> >> >>>>> I'm wanting to completely remove the VM and reclaim the space for >> >>>>> the >> >>>>> datacenter. >> >>>>> >> >>>>> Thank you. >> >>>>> >> >>>>> Regards. >> >>>>> >> >>>>> Neil Wilson >> >>>>> >> >>>>> >> >>>>> >> >>>>> _______________________________________________ >> >>>>> Users mailing list >> >>>>> Users(a)ovirt.org >> >>>>> http://lists.ovirt.org/mailman/listinfo/users >> >>>>> >> >>>> >> >>> >> >> >> >> _______________________________________________ >> Users mailing list >> Users(a)ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users > >

1 0

Removing VM disk issue
by Neil 28 May '14

28 May '14

Hi guys, I'm trying to remove a VM and reclaim the space that the VM was using. This particular VM had a thin provisioned disk attached as well as "fat" provisioned, the "fat" disks I managed to detach, however when I try to remove the VM, it says "The following disks are locked: Please try again in a few minutes. Attached is a screenshot from the GUI side, showing the proxy disk being locked, any ideas? I'm wanting to completely remove the VM and reclaim the space for the datacenter. Thank you. Regards. Neil Wilson

3 6

Re: [ovirt-users] ovirt step by step support
by JvR O 28 May '14

28 May '14

Hi, I will keep in mind. Thanks you. Regards 2014-05-27 13:27 GMT+02:00 René Koch <rkoch(a)linuxland.at>: > On 05/26/2014 08:36 PM, JvR O wrote: > >> Hi, >> Where can I get step by step support for installation and configuration >> of oVirt on my centos server? >> > > My company provides consulting for oVirt and RHEV and we help customers > installing (and maintaining) their environment. We're located in Austria > and Germany (but other countries are possible, too :) ). > > > >> Any kind of support subscription? >> > > Sure - we can provide a support contract. > > Just drop me an email (off-list) if you're interested... > > > -- > Best Regards > > René Koch > Senior Solution Architect > > ============================================ > LIS-Linuxland GmbH > Brünner Straße 163, A-1210 Vienna > Phone: +43 1 236 91 60 > Mobile: +43 660 / 512 21 31 > E-Mail: rkoch(a)linuxland.at > ============================================ > > > > Regards. >> >> >> >> _______________________________________________ >> Users mailing list >> Users(a)ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >>

2 1

Server 2012 R2 no drive found
by Neil 28 May '14

28 May '14

Hi guys, I've been trying to install 2012 R2 onto my ovirt 3.4 but no matter what I do, it either doesn't find an IDE drive or a Virtio drive (when using the virtio ISO). ovirt-engine-lib-3.4.0-1.el6.noarch ovirt-engine-restapi-3.4.0-1.el6.noarch ovirt-engine-setup-plugin-ovirt-engine-3.4.0-1.el6.noarch ovirt-engine-3.4.0-1.el6.noarch ovirt-engine-setup-plugin-websocket-proxy-3.4.0-1.el6.noarch ovirt-host-deploy-java-1.2.0-1.el6.noarch ovirt-engine-cli-3.2.0.10-1.el6.noarch ovirt-engine-setup-3.4.0-1.el6.noarch ovirt-host-deploy-1.2.0-1.el6.noarch ovirt-engine-backend-3.4.0-1.el6.noarch ovirt-image-uploader-3.4.0-1.el6.noarch ovirt-engine-tools-3.4.0-1.el6.noarch ovirt-engine-sdk-python-3.4.0.7-1.el6.noarch ovirt-engine-webadmin-portal-3.4.0-1.el6.noarch ovirt-engine-setup-base-3.4.0-1.el6.noarch ovirt-iso-uploader-3.4.0-1.el6.noarch ovirt-engine-userportal-3.4.0-1.el6.noarch ovirt-log-collector-3.4.1-1.el6.noarch ovirt-engine-websocket-proxy-3.4.0-1.el6.noarch ovirt-engine-setup-plugin-ovirt-engine-common-3.4.0-1.el6.noarch ovirt-engine-dbscripts-3.4.0-1.el6.noarch vdsm-4.14.6-0.el6.x86_64 vdsm-xmlrpc-4.14.6-0.el6.noarch vdsm-cli-4.14.6-0.el6.noarch vdsm-python-zombiereaper-4.14.6-0.el6.noarch vdsm-python-4.14.6-0.el6.x86_64 qemu-img-0.12.1.2-2.415.el6_5.8.x86_64 qemu-kvm-tools-0.12.1.2-2.415.el6_5.8.x86_64 qemu-kvm-0.12.1.2-2.415.el6_5.8.x86_64 gpxe-roms-qemu-0.9.7-6.9.el6.noarch Is there a special trick to get this working, or could something be wrong? When it comes to creating a guest I don't see a Server 2012 R2 64bit in the drop down list? Thanks. Regards. Neil Wilson.

4 5

oVirt introduction slide in FUDConf APAC 2014 Beijing
by 适兕 28 May '14

28 May '14

Hi： Every oVirt users, Last weekend, I introduce oVirt in FUDConf APAC 2014 Beijing. all event is here: http://fedoraproject.org/wiki/FUDCon:Beijing_2014 I just upload my slide, URL: http://www.ovirt.org/File:OVirt-Overview-FUDCon2014.odp Feel free for this. -- 独立之思想，自由之精神。 --陈寅恪

1 0

Can't Install/Upgrade host
by Neil 28 May '14

28 May '14

Hi guys, I'm trying to upgrade/re-install a host running Centos 6.5, but even after removing the host completely and trying to re-add it, I keep getting a "Certificate enrollment failed" error. The full error below is taken from my engine.log... 2014-05-27 10:38:33,729 ERROR [org.ovirt.engine.core.utils.servlet.ServletUtils] (ajp--127.0.0.1-8702-4) Can't read file "/var/lib/ovirt-engine/reports.xml" for request "/ovirt-engine/services/reports-ui", will send a 404 error response. 2014-05-27 11:10:49,343 ERROR [org.ovirt.engine.core.bll.VdsDeploy] (VdsDeploy) Error during deploy dialog: java.io.IOException: Unexpected connection termination 2014-05-27 11:10:49,344 ERROR [org.ovirt.engine.core.utils.ssh.SSHDialog] (org.ovirt.thread.pool-6-thread-31) SSH error running command root(a)10.251.193.9:'umask 0077; MYTMP="$(mktemp -t ovirt-XXXXXXXXXX)"; trap "chmod -R u+rwX \"${MYTMP}\" > /dev/null 2>&1; rm -fr \"${MYTMP}\" > /dev/null 2>&1" 0; rm -fr "${MYTMP}" && mkdir "${MYTMP}" && tar --warning=no-timestamp -C "${MYTMP}" -x && "${MYTMP}"/setup DIALOG/dialect=str:machine DIALOG/customization=bool:True': javax.naming.TimeLimitExceededException: SSH session hard timeout host 'root(a)10.251.193.9' 2014-05-27 11:10:49,369 ERROR [org.ovirt.engine.core.bll.VdsDeploy] (org.ovirt.thread.pool-6-thread-31) [26c21342] Timeout during host 10.251.193.9 install: javax.naming.TimeLimitExceededException: SSH session hard timeout host 'root(a)10.251.193.9' 2014-05-27 11:10:49,377 ERROR [org.ovirt.engine.core.bll.InstallerMessages] (org.ovirt.thread.pool-6-thread-31) [26c21342] Installation 10.251.193.9: Processing stopped due to timeout 2014-05-27 11:10:49,434 ERROR [org.ovirt.engine.core.bll.InstallVdsCommand] (org.ovirt.thread.pool-6-thread-31) [26c21342] Host installation failed for host 322cbee8-16e6-11e2-9d38-6388c61dd004, node02.blabla.gov.za.: javax.naming.TimeLimitExceededException: SSH session hard timeout host 'root(a)10.251.193.9' 2014-05-27 12:44:36,200 ERROR [org.ovirt.engine.core.utils.servlet.ServletUtils] (ajp--127.0.0.1-8702-1) Can't read file "/var/lib/ovirt-engine/reports.xml" for request "/ovirt-engine/services/reports-ui", will send a 404 error response. 2014-05-27 13:16:21,679 ERROR [org.ovirt.engine.core.utils.hostinstall.OpenSslCAWrapper] (VdsDeploy) Sign Certificate request failed with exit code 1 2014-05-27 13:16:21,680 ERROR [org.ovirt.engine.core.utils.hostinstall.OpenSslCAWrapper] (VdsDeploy) Sign Certificate request script errors: Error opening Certificate ca.pem 140249235597128:error:0200100D:system library:fopen:Permission denied:bss_file.c:398:fopen('ca.pem','r') 140249235597128:error:20074002:BIO routines:FILE_CTRL:system lib:bss_file.c:400: Error opening CA private key private/ca.pem 140630029801288:error:0200100D:system library:fopen:Permission denied:bss_file.c:398:fopen('private/ca.pem','r') 140630029801288:error:20074002:BIO routines:FILE_CTRL:system lib:bss_file.c:400: 2014-05-27 13:16:21,684 ERROR [org.ovirt.engine.core.bll.VdsDeploy] (VdsDeploy) Error during deploy dialog: java.lang.RuntimeException: Certificate enrollment failed 2014-05-27 13:16:21,689 ERROR [org.ovirt.engine.core.bll.VdsDeploy] (org.ovirt.thread.pool-6-thread-21) [1a930dd7] Error during host 10.251.193.9 install: java.lang.RuntimeException: Certificate enrollment failed 2014-05-27 13:16:21,694 ERROR [org.ovirt.engine.core.bll.InstallerMessages] (org.ovirt.thread.pool-6-thread-21) [1a930dd7] Installation 10.251.193.9: Certificate enrollment failed 2014-05-27 13:16:21,740 ERROR [org.ovirt.engine.core.bll.VdsDeploy] (org.ovirt.thread.pool-6-thread-21) [1a930dd7] Error during host 10.251.193.9 install, prefering first exception: java.lang.RuntimeException: Certificate enrollment failed 2014-05-27 13:16:21,744 ERROR [org.ovirt.engine.core.bll.InstallVdsCommand] (org.ovirt.thread.pool-6-thread-21) [1a930dd7] Host installation failed for host 322cbee8-16e6-11e2-9d38-6388c61dd004, node02.blabla.gov.za.: java.lang.RuntimeException: Certificate enrollment failed 2014-05-27 14:31:12,192 ERROR [org.ovirt.engine.core.utils.servlet.ServletUtils] (ajp--127.0.0.1-8702-2) Can't read file "/var/lib/ovirt-engine/reports.xml" for request "/ovirt-engine/services/reports-ui", will send a 404 error response. 2014-05-27 14:32:58,669 ERROR [org.ovirt.engine.core.utils.servlet.ServletUtils] (ajp--127.0.0.1-8702-7) Can't read file "/var/lib/ovirt-engine/reports.xml" for request "/ovirt-engine/services/reports-ui", will send a 404 error response. 2014-05-27 14:36:33,523 ERROR [org.ovirt.engine.core.utils.hostinstall.OpenSslCAWrapper] (VdsDeploy) Sign Certificate request failed with exit code 1 2014-05-27 14:36:33,524 ERROR [org.ovirt.engine.core.utils.hostinstall.OpenSslCAWrapper] (VdsDeploy) Sign Certificate request script errors: Error opening Certificate ca.pem 140189576382280:error:0200100D:system library:fopen:Permission denied:bss_file.c:398:fopen('ca.pem','r') 140189576382280:error:20074002:BIO routines:FILE_CTRL:system lib:bss_file.c:400: Error opening CA private key private/ca.pem 140632037402440:error:0200100D:system library:fopen:Permission denied:bss_file.c:398:fopen('private/ca.pem','r') 140632037402440:error:20074002:BIO routines:FILE_CTRL:system lib:bss_file.c:400: 2014-05-27 14:36:33,528 ERROR [org.ovirt.engine.core.bll.VdsDeploy] (VdsDeploy) Error during deploy dialog: java.lang.RuntimeException: Certificate enrollment failed 2014-05-27 14:36:33,534 ERROR [org.ovirt.engine.core.bll.VdsDeploy] (org.ovirt.thread.pool-6-thread-33) [5537b7c] Error during host 10.251.193.9 install: java.lang.RuntimeException: Certificate enrollment failed 2014-05-27 14:36:33,545 ERROR [org.ovirt.engine.core.bll.InstallerMessages] (org.ovirt.thread.pool-6-thread-33) [5537b7c] Installation 10.251.193.9: Certificate enrollment failed 2014-05-27 14:36:33,572 ERROR [org.ovirt.engine.core.bll.VdsDeploy] (org.ovirt.thread.pool-6-thread-33) [5537b7c] Error during host 10.251.193.9 install, prefering first exception: java.lang.RuntimeException: Certificate enrollment failed 2014-05-27 14:36:33,576 ERROR [org.ovirt.engine.core.bll.InstallVdsCommand] (org.ovirt.thread.pool-6-thread-33) [5537b7c] Host installation failed for host 322cbee8-16e6-11e2-9d38-6388c61dd004, node02.blabla.gov.za.: java.lang.RuntimeException: Certificate enrollment failed 2014-05-27 14:40:26,630 ERROR [org.ovirt.engine.core.utils.hostinstall.OpenSslCAWrapper] (VdsDeploy) Sign Certificate request failed with exit code 1 2014-05-27 14:40:26,631 ERROR [org.ovirt.engine.core.utils.hostinstall.OpenSslCAWrapper] (VdsDeploy) Sign Certificate request script errors: Error opening Certificate ca.pem 139666318882632:error:0200100D:system library:fopen:Permission denied:bss_file.c:398:fopen('ca.pem','r') 139666318882632:error:20074002:BIO routines:FILE_CTRL:system lib:bss_file.c:400: Error opening CA private key private/ca.pem 139701081003848:error:0200100D:system library:fopen:Permission denied:bss_file.c:398:fopen('private/ca.pem','r') 139701081003848:error:20074002:BIO routines:FILE_CTRL:system lib:bss_file.c:400: 2014-05-27 14:40:26,633 ERROR [org.ovirt.engine.core.bll.VdsDeploy] (VdsDeploy) Error during deploy dialog: java.lang.RuntimeException: Certificate enrollment failed 2014-05-27 14:40:26,637 ERROR [org.ovirt.engine.core.bll.VdsDeploy] (org.ovirt.thread.pool-6-thread-11) [7f68b0e2] Error during host 10.251.193.9 install: java.lang.RuntimeException: Certificate enrollment failed 2014-05-27 14:40:26,639 ERROR [org.ovirt.engine.core.bll.InstallerMessages] (org.ovirt.thread.pool-6-thread-11) [7f68b0e2] Installation 10.251.193.9: Certificate enrollment failed 2014-05-27 14:40:26,709 ERROR [org.ovirt.engine.core.bll.VdsDeploy] (org.ovirt.thread.pool-6-thread-11) [7f68b0e2] Error during host 10.251.193.9 install, prefering first exception: java.lang.RuntimeException: Certificate enrollment failed 2014-05-27 14:40:26,711 ERROR [org.ovirt.engine.core.bll.InstallVdsCommand] (org.ovirt.thread.pool-6-thread-11) [7f68b0e2] Host installation failed for host 322cbee8-16e6-11e2-9d38-6388c61dd004, node02.blabla.gov.za.: java.lang.RuntimeException: Certificate enrollment failed 2014-05-27 15:04:24,260 ERROR [org.ovirt.engine.core.utils.hostinstall.OpenSslCAWrapper] (VdsDeploy) Sign Certificate request failed with exit code 1 2014-05-27 15:04:24,261 ERROR [org.ovirt.engine.core.utils.hostinstall.OpenSslCAWrapper] (VdsDeploy) Sign Certificate request script errors: Error opening Certificate ca.pem 140668006123336:error:0200100D:system library:fopen:Permission denied:bss_file.c:398:fopen('ca.pem','r') 140668006123336:error:20074002:BIO routines:FILE_CTRL:system lib:bss_file.c:400: Error opening CA private key private/ca.pem 140106430207816:error:0200100D:system library:fopen:Permission denied:bss_file.c:398:fopen('private/ca.pem','r') 140106430207816:error:20074002:BIO routines:FILE_CTRL:system lib:bss_file.c:400: 2014-05-27 15:04:24,265 ERROR [org.ovirt.engine.core.bll.VdsDeploy] (VdsDeploy) Error during deploy dialog: java.lang.RuntimeException: Certificate enrollment failed 2014-05-27 15:04:24,270 ERROR [org.ovirt.engine.core.bll.VdsDeploy] (org.ovirt.thread.pool-6-thread-34) [797b7d7a] Error during host 10.251.193.9 install: java.lang.RuntimeException: Certificate enrollment failed 2014-05-27 15:04:24,277 ERROR [org.ovirt.engine.core.bll.InstallerMessages] (org.ovirt.thread.pool-6-thread-34) [797b7d7a] Installation 10.251.193.9: Certificate enrollment failed 2014-05-27 15:04:24,348 ERROR [org.ovirt.engine.core.bll.VdsDeploy] (org.ovirt.thread.pool-6-thread-34) [797b7d7a] Error during host 10.251.193.9 install, prefering first exception: java.lang.RuntimeException: Certificate enrollment failed 2014-05-27 15:04:24,352 ERROR [org.ovirt.engine.core.bll.InstallVdsCommand] (org.ovirt.thread.pool-6-thread-34) [797b7d7a] Host installation failed for host 322cbee8-16e6-11e2-9d38-6388c61dd004, node02.blabla.gov.za.: java.lang.RuntimeException: Certificate enrollment failed 2014-05-27 16:48:49,075 ERROR [org.ovirt.engine.core.utils.servlet.ServletUtils] (ajp--127.0.0.1-8702-4) Can't read file "/var/lib/ovirt-engine/reports.xml" for request "/ovirt-engine/services/reports-ui", will send a 404 error response. 2014-05-27 17:03:10,817 ERROR [org.ovirt.engine.core.utils.hostinstall.OpenSslCAWrapper] (VdsDeploy) Sign Certificate request failed with exit code 1 2014-05-27 17:03:10,817 ERROR [org.ovirt.engine.core.utils.hostinstall.OpenSslCAWrapper] (VdsDeploy) Sign Certificate request script errors: Error opening Certificate ca.pem 140117678909256:error:0200100D:system library:fopen:Permission denied:bss_file.c:398:fopen('ca.pem','r') 140117678909256:error:20074002:BIO routines:FILE_CTRL:system lib:bss_file.c:400: Error opening CA private key private/ca.pem 140049924028232:error:0200100D:system library:fopen:Permission denied:bss_file.c:398:fopen('private/ca.pem','r') 140049924028232:error:20074002:BIO routines:FILE_CTRL:system lib:bss_file.c:400: 2014-05-27 17:03:10,821 ERROR [org.ovirt.engine.core.bll.VdsDeploy] (VdsDeploy) Error during deploy dialog: java.lang.RuntimeException: Certificate enrollment failed 2014-05-27 17:03:10,828 ERROR [org.ovirt.engine.core.bll.VdsDeploy] (org.ovirt.thread.pool-6-thread-18) [2bb26823] Error during host 10.251.193.9 install: java.lang.RuntimeException: Certificate enrollment failed 2014-05-27 17:03:10,839 ERROR [org.ovirt.engine.core.bll.InstallerMessages] (org.ovirt.thread.pool-6-thread-18) [2bb26823] Installation 10.251.193.9: Certificate enrollment failed 2014-05-27 17:03:10,891 ERROR [org.ovirt.engine.core.bll.VdsDeploy] (org.ovirt.thread.pool-6-thread-18) [2bb26823] Error during host 10.251.193.9 install, prefering first exception: java.lang.RuntimeException: Certificate enrollment failed 2014-05-27 17:03:10,895 ERROR [org.ovirt.engine.core.bll.InstallVdsCommand] (org.ovirt.thread.pool-6-thread-18) [2bb26823] Host installation failed for host d2debdfe-76e7-40cf-a7fd-78a0f50f14d4, node02.blabla.gov.za.: java.lang.RuntimeException: Certificate enrollment failed I've looked around quite a bit and can't seem to find much. Please could someone assist. Thank you. Regards, Neil Wilson.

2 4