- Users - oVirt List Archives

[Users] Minor HTML5 Spice Bug
by Thomas Suckow 29 Nov '13

29 Nov '13

I have been using the HTML5 Spice websocket plug-in and so far it works extremely well. I just have two comments/bugs about it. I look on the issue tracker and I did not see an appropriate component listed, so I will list them here: * When the virtual screen is resized (such as during boot when the GUI login is displayed) the mouse cursor gets messed up and clicking only clicks the upper left corner of the screen. * The SSL key has to be readable by the ovirt user rather than root *cough*. Maybe the proxy_wstunnel apache module could be of use to avoid SSL in the plugin. -- Thomas

2 3

[Users] Bug cron 3.3.1-2 ?
by Sven Kieske 29 Nov '13

29 Nov '13

Hi, It seems, the ovirt-cron does something which does not work out of the box: From: Anacron <root(a)management.test> To: root(a)management.test Content-Type: text/plain; charset="ANSI_X3.4-1968" Subject: Anacron job 'cron.daily' on management.test Message-Id: <20131025010702.1A48740038F(a)management.test> Date: Fri, 25 Oct 2013 03:07:02 +0200 (CEST) /etc/cron.daily/ovirt-cron: ls: cannot access /var/log/ovirt-engine/server.log.*: No such file or directory ls: cannot access /var/log/ovirt-engine/jasperserver.log.*: No such file or directory ls: cannot access /var/log/ovirt-engine/server.log.*.gz: No such file or directory ls: cannot access /var/log/ovirt-engine/jasperserver.log.*.gz: No such file or directory Is this intended behaviour? ovirt-engine 3.3.1-2 on CentOS 6.4. -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH & Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen

2 1

[Users] RFE/Bug? Cloud-Init in oVirt 3.3.1 / IPv6 Support
by Sven Kieske 29 Nov '13

29 Nov '13

Hi, currently, you can not set a static network via Cloud-Init. How to reproduce: Select a shutdown vm, click run once. Click Initial Run, select Cloud-Init Now select "Network" and "add new" Name your interface, e.g. eth0 Do not configure DHCP, instead, fill in IP Address, Netmask, Gateway, etc. I would suppose that this would pass the following options into the meta-data: iface eth0 inet static but if you mount the meta-data cd-rom into any vm and read the meta-data.json it says: iface eth0 inet none the rest of the information seems to be correct, though. You can see this from 2 point of views: 1. If I do not select DHCP and I configure IP Address etc. I want a static configuration, therefore "static" should be in the meta-data. If I would have wanted "none", I wouldn't bother configuring the interface, would I? -> Bug 2. There is no button for "static" in the GUI, therefore the option get's not passed, "none" may be the default option. In this case, it would be cool to have a checkbox for "static". --> RFE I didn't test this from the API yet, but I hope there is an option to set the networking to static from there? What do you think? Bug or RFE? Can this be fixed in 3.3.1.1 maybe (fix should be small, without looking into the code)? I can't always do full upgrades (3.3.2 would be next). My second topic would be IPv6 Support: It simply does not exist in Cloud-Init to pass this option to the guest, I read this old thread: http://lists.ovirt.org/pipermail/engine-devel/2013-June/004893.html My Question: Are there any plans to improve this? I will work around it maybe through custom parsing and file injecting the IPv6 data through Cloud-Init, but would prefer to pass this information simply to Cloud-Init. -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH & Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen

3 4

[Users] Self contained engine ETA
by Juan Pablo Lorier 29 Nov '13

29 Nov '13

Hi, Is there any estimated time for self contained engine release? Will it be possible to migrate engine to existing DC? I'm now buying a new server just for the engine that actually runs in a vm on a different virtualization platform, and I'll like to know if it's woth the effort of migration at this time our I should wait a bit to get the feature. Regards,

4 5

[Users] windows Server 2012R2 Spice Driver support
by Lindsay Mathieson 28 Nov '13

28 Nov '13

Is redhat working on this? -- Lindsay

2 1

[Users] Installation fails on Fedora 19 - Failed to execute stage 'Closing up': Engine unreachable
by Peter Lerche 28 Nov '13

28 Nov '13

Hi, I new to oVirt want to install a all-in-one package for testing only. Installed a vanilla Fedora 19 64bit and followed the guide. sudo yum localinstall http://ovirt.org/releases/ovirt-release-fedora.noarch.rpm sudo yum install -y ovirt-engine-setup-plugin-allinone sudo engine-setup I get following error when running engine-setup: [ INFO ] Starting engine service [ INFO ] Restarting httpd [ ERROR ] Failed to execute stage 'Closing up': Engine unreachable [ INFO ] Stage: Clean up Log file is located at /var/log/ovirt-engine/setup/ovirt-engine-setup-20131128155012.log [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Execution of setup failed When trying to access the webinterface i get: javax.ejb.EJBException: java.lang.IllegalStateException: Could not obtain connection to the database. Please make sure that DB is up and accepting connections, and restart the application. org.jboss.as.ejb3.tx.CMTTxInterceptor.handleExceptionInOurTx(CMTTxInterceptor.java:166) I have tried to re-run the engine-setup and re-install Fedora/oVirt several times but it does not help. Is this a common error which I just can't find the documentation ? Here is the full installation output and the last part of the logfile: ----------------------------------------------------------------------- [ INFO ] Stage: Initializing [ INFO ] Stage: Environment setup Configuration files: ['/etc/ovirt-engine-setup.conf.d/10-packaging-aio.conf', '/etc/ovirt-engine-setup.conf.d/10-packaging.conf'] Log file: /var/log/ovirt-engine/setup/ovirt-engine-setup-20131128155012.log Version: otopi-1.1.2 (otopi-1.1.2-1.fc19) [ INFO ] Hardware supports virtualization [ INFO ] Stage: Environment packages setup [ INFO ] Stage: Programs detection [ INFO ] Stage: Environment setup [ INFO ] Stage: Environment customization --== PACKAGES ==-- [ INFO ] Checking for product updates... [ INFO ] No product updates found --== ALL IN ONE CONFIGURATION ==-- Configure VDSM on this host? (Yes, No) [No]: yes Local storage domain path [/var/lib/images]: Local storage domain name [local_storage]: --== NETWORK CONFIGURATION ==-- Host fully qualified DNS name of this server [mydomain.com] firewalld was detected on your computer. Do you wish Setup to configure it? (yes, no) [yes]: --== DATABASE CONFIGURATION ==-- Where is the database located? (Local, Remote) [Local]: Setup can configure the local postgresql server automatically for the engine to run. This may conflict with existing applications. Would you like Setup to automatically configure postgresql, or prefer to perform that manually? (Automatic, Manual) [Automatic]: Using existing credentials --== OVIRT ENGINE CONFIGURATION ==-- Engine admin password: Confirm engine admin password: Application mode (Both, Virt, Gluster) [Both]: Virt Default storage type: (NFS, FC, ISCSI, POSIXFS) [NFS]: --== PKI CONFIGURATION ==-- Organization name for certificate [myCompany.com] myCompany --== APACHE CONFIGURATION ==-- Setup can configure the default page of the web server to present the application home page. This may conflict with existing applications. Do you wish to set the application as the default page of the web server? (Yes, No) [Yes]: Setup can configure apache to use SSL using a certificate issued from the internal CA. Do you wish Setup to configure that, or prefer to perform that manually? (Automatic, Manual) [Automatic]: --== SYSTEM CONFIGURATION ==-- Configure an NFS share on this server to be used as an ISO Domain? (Yes, No) [Yes]: Local ISO domain path [/var/lib/exports/iso]: Local ISO domain name [ISO_DOMAIN]: Configure WebSocket Proxy on this machine? (Yes, No) [Yes]: --== END OF CONFIGURATION ==-- [ INFO ] Stage: Setup validation --== CONFIGURATION PREVIEW ==-- Database name : engine Database secured connection : False Database host : localhost Database user name : engine Database host name validation : False Datbase port : 5432 NFS setup : True PKI organization : myCompany NFS mount point : /var/lib/exports/iso Application mode : virt Firewall manager : firewalld Configure WebSocket Proxy : True Host FQDN : mydomain.com Datacenter storage type : nfs Configure local database : True Set application as default page : True Configure Apache SSL : True Configure VDSM on this host : True Local storage domain directory : /var/lib/images Please confirm installation settings (OK, Cancel) [OK]: [ INFO ] Stage: Transaction setup [ INFO ] Stopping engine service [ INFO ] Stopping websocket-proxy service [ INFO ] Stage: Misc configuration [ INFO ] Stage: Package installation [ INFO ] Stage: Misc configuration [ INFO ] Initializing PostgreSQL [ INFO ] Creating PostgreSQL database [ INFO ] Configurating PostgreSQL [ INFO ] Creating database schema [ INFO ] Creating CA [ INFO ] Configurating WebSocket Proxy [ INFO ] Generating post install configuration file '/etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf' [ INFO ] Stage: Transaction commit [ INFO ] Stage: Closing up --== SUMMARY ==-- An ISO NFS share has been created on this host. If IP based access restrictions are required, edit: entry /var/lib/exports/iso in /etc/exports.d/ovirt-engine-iso-domain.exports SSH fingerprint: XX XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX Internal XX XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX Web access is enabled at: http://mydomain.com:80/ovirt-engine https://mydomain.com:443/ovirt-engine Please use the user "admin" and password specified in order to login into oVirt Engine --== END OF SUMMARY ==-- [ INFO ] Starting engine service [ INFO ] Restarting httpd [ ERROR ] Failed to execute stage 'Closing up': Engine unreachable [ INFO ] Stage: Clean up Log file is located at /var/log/ovirt-engine/setup/ovirt-engine-setup-20131128155012.log [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Execution of setup failed 2013-11-28 16:05:51 DEBUG otopi.context context.dumpEnvironment:456 ENV OVESETUP_SYSTEM/selinuxRestorePaths=list:'['/var/lib/images', '/var/lib/exports/iso']' 2013-11-28 16:05:51 DEBUG otopi.context context.dumpEnvironment:456 ENV OVESETUP_SYSTEM/shmmax=int:'35554432' 2013-11-28 16:05:51 DEBUG otopi.context context.dumpEnvironment:456 ENV OVESETUP_SYSTEM/userApache=str:'apache' 2013-11-28 16:05:51 DEBUG otopi.context context.dumpEnvironment:456 ENV OVESETUP_SYSTEM/userEngine=str:'ovirt' 2013-11-28 16:05:51 DEBUG otopi.context context.dumpEnvironment:456 ENV OVESETUP_SYSTEM/userPostgres=str:'postgres' 2013-11-28 16:05:51 DEBUG otopi.context context.dumpEnvironment:456 ENV OVESETUP_SYSTEM/userRoot=str:'root' 2013-11-28 16:05:51 DEBUG otopi.context context.dumpEnvironment:456 ENV OVESETUP_SYSTEM/userVdsm=str:'vdsm' 2013-11-28 16:05:51 DEBUG otopi.context context.dumpEnvironment:456 ENV PACKAGER/keepAliveInterval=int:'30' 2013-11-28 16:05:51 DEBUG otopi.context context.dumpEnvironment:456 ENV PACKAGER/yumDisabledPlugins=list:'[]' 2013-11-28 16:05:51 DEBUG otopi.context context.dumpEnvironment:456 ENV PACKAGER/yumEnabledPlugins=list:'[]' 2013-11-28 16:05:51 DEBUG otopi.context context.dumpEnvironment:456 ENV PACKAGER/yumExpireCache=bool:'True' 2013-11-28 16:05:51 DEBUG otopi.context context.dumpEnvironment:456 ENV PACKAGER/yumRollback=bool:'True' 2013-11-28 16:05:51 DEBUG otopi.context context.dumpEnvironment:456 ENV PACKAGER/yumpackagerEnabled=bool:'True' 2013-11-28 16:05:51 DEBUG otopi.context context.dumpEnvironment:456 ENV SYSTEM/clockMaxGap=int:'5' 2013-11-28 16:05:51 DEBUG otopi.context context.dumpEnvironment:456 ENV SYSTEM/clockSet=bool:'False' 2013-11-28 16:05:51 DEBUG otopi.context context.dumpEnvironment:456 ENV SYSTEM/commandPath=str:'/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin' 2013-11-28 16:05:51 DEBUG otopi.context context.dumpEnvironment:456 ENV SYSTEM/reboot=bool:'False' 2013-11-28 16:05:51 DEBUG otopi.context context.dumpEnvironment:456 ENV SYSTEM/rebootAllow=bool:'True' 2013-11-28 16:05:51 DEBUG otopi.context context.dumpEnvironment:456 ENV SYSTEM/rebootDeferTime=int:'10' 2013-11-28 16:05:51 DEBUG otopi.context context.dumpEnvironment:458 ENVIRONMENT DUMP - END 2013-11-28 16:05:51 DEBUG otopi.context context._executeMethod:123 Stage pre-terminate METHOD otopi.plugins.otopi.dialog.cli.Plugin._pre_terminate 2013-11-28 16:05:51 DEBUG otopi.context context._executeMethod:129 condition False 2013-11-28 16:05:51 INFO otopi.context context.runSequence:380 Stage: Termination 2013-11-28 16:05:51 DEBUG otopi.context context.runSequence:384 STAGE terminate 2013-11-28 16:05:51 DEBUG otopi.context context._executeMethod:123 Stage terminate METHOD otopi.plugins.ovirt_engine_common.core.misc.Plugin._terminate 2013-11-28 16:05:51 ERROR otopi.plugins.ovirt_engine_common.core.misc misc._terminate:146 Execution of setup failed 2013-11-28 16:05:51 DEBUG otopi.context context._executeMethod:123 Stage terminate METHOD otopi.plugins.otopi.dialog.human.Plugin._terminate 2013-11-28 16:05:51 DEBUG otopi.context context._executeMethod:123 Stage terminate METHOD otopi.plugins.otopi.dialog.machine.Plugin._terminate 2013-11-28 16:05:51 DEBUG otopi.context context._executeMethod:129 condition False 2013-11-28 16:05:51 DEBUG otopi.context context._executeMethod:123 Stage terminate METHOD otopi.plugins.otopi.core.log.Plugin._terminate

2 1

[Users] Introductory email
by Peter Lerche 28 Nov '13

28 Nov '13

Hi, Just to introduce myself, I am Peter Lerche co-founder of a Danish hosting provider. We have for some years been looking at cloud/VPS solutions for our customers but until now have not found a suitable platform. oVirt looks promising....... on paper and now we want to test it. -- Best regards Peter Lerche EasySpeedy ApS 377, Diplomvej Scion-DTU Science Park DK-2800, Kgs. Lyngby Denmark Phone: +45 4594 1401 http://EasySpeedy.com _____________________________________________________ European Quality Unmanaged Server Hosting Permanent KVMoIP included in all dedicated servers Network and Power Uptime - 99,98% Since 16 Jan 2006 Follow us on Twitter - https://twitter.com/easyspeedy _____________________________________________________

2 1

[Users] oVirt 3.4 SLA & Scheduling feature overview
by Gilad Chaplik 28 Nov '13

28 Nov '13

------=_Part_42557408_1097164829.1385655491891 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit The following is a new meeting request: Subject: oVirt 3.4 SLA & Scheduling feature overview Organizer: "Gilad Chaplik" <gchaplik(a)redhat.com> Time: Monday, December 2, 2013, 5:00:00 PM - 6:00:00 PM GMT +02:00 Jerusalem Invitees: users(a)ovirt.org; arch(a)ovirt.org *~*~*~*~*~*~*~*~*~* Hi all, I invite you to a overview for planed SLA & Scheduling features for oVirt 3.4. We will talk briefly about every suggested feature including: - positive/negative affinity between group of VMs - power saving policy moving hosts to sleep - time based policy (SLA during the day, power saving at night) - application level HA (monitor the service inside the VM) People are welcome to join in the #ovirt channel on irc.OFTC.net. Thanks ------=_Part_42557408_1097164829.1385655491891 Content-Type: text/calendar; charset=utf-8; method=REQUEST; name=meeting.ics Content-Transfer-Encoding: 7bit BEGIN:VCALENDAR PRODID:Zimbra-Calendar-Provider VERSION:2.0 METHOD:REQUEST BEGIN:VTIMEZONE TZID:Asia/Jerusalem BEGIN:STANDARD DTSTART:16010101T020000 TZOFFSETTO:+0200 TZOFFSETFROM:+0300 RRULE:FREQ=YEARLY;WKST=MO;INTERVAL=1;BYMONTH=10;BYDAY=-1SU TZNAME:IST END:STANDARD BEGIN:DAYLIGHT DTSTART:16010101T020000 TZOFFSETTO:+0300 TZOFFSETFROM:+0200 RRULE:FREQ=YEARLY;WKST=MO;INTERVAL=1;BYMONTH=3;BYDAY=-1FR TZNAME:IDT END:DAYLIGHT END:VTIMEZONE BEGIN:VEVENT UID:4191272a-a49b-42d1-8571-2384c9793ddd SUMMARY:oVirt 3.4 SLA & Scheduling feature overview ATTENDEE;CN=oVirt Mailing List;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RS VP=TRUE:mailto:users@ovirt.org ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE:mailto:arch@ov irt.org ORGANIZER;CN=Gilad Chaplik:mailto:gchaplik@redhat.com DTSTART;TZID="Asia/Jerusalem":20131202T170000 DTEND;TZID="Asia/Jerusalem":20131202T180000 STATUS:CONFIRMED CLASS:PUBLIC X-MICROSOFT-CDO-INTENDEDSTATUS:BUSY TRANSP:OPAQUE LAST-MODIFIED:20131128T161811Z DTSTAMP:20131128T161811Z SEQUENCE:0 DESCRIPTION:The following is a new meeting request:\n\nSubject: oVirt 3.4 SL A &amp\; Scheduling feature overview \nOrganizer: "Gilad Chaplik" <gchaplik@ redhat.com> \n\nTime: Monday\, December 2\, 2013\, 5:00:00 PM - 6:00:00 PM G MT +02:00 Jerusalem\n \nInvitees: users(a)ovirt.org\; arch(a)ovirt.org \n\n\n*~* ~*~*~*~*~*~*~*~*\n\nHi all\, \n\nI invite you to a overview for planed SLA & Scheduling features for oVirt 3.4.\nWe will talk briefly about every sugges ted feature including:\n- positive/negative affinity between group of VMs\n- power saving policy moving hosts to sleep\n- time based policy (SLA during the day\, power saving at night)\n- application level HA (monitor the servic e inside the VM) \n\nPeople are welcome to join in the #ovirt channel on irc .OFTC.net.\n\nThanks\n\n BEGIN:VALARM ACTION:DISPLAY TRIGGER;RELATED=START:-PT5M DESCRIPTION:Reminder END:VALARM END:VEVENT END:VCALENDAR ------=_Part_42557408_1097164829.1385655491891--

1 0

[Users] oVirt vdsm network problem
by Jakub Bittner 28 Nov '13

28 Nov '13

Hello, I found strange problem in vdsm 4.13.0 with oVirt 3.3.1. After 30 hours from update (ovirt -> 3.3.1, vdsm -> 4.13) my one vlan network does not work. There is nothing in log, I can see network trafic from not working vlan on node in tcpdump, but it not come to VM. After vdsm restart on node it works like expected. I take a look in to oVirt -> Host -> Network Interface and all nodes has bond interface changed from "Mode 4 Dynamic link agregation" to "Custom: mode=4" and Custom mode is filled by "mode=4" Mabe it is the same, but who change that? I can have one node in this status if someone will want more info or logs.

2 5

[Users] oVirt 3.3.1 rlease
by Kiril Nesenko 28 Nov '13

28 Nov '13

The oVirt development team is very happy to announce the general availability of oVirt 3.3.1 as of November 21th 2013. This release solidifies oVirt as a leading KVM management application, and open source alternative to VMware vSphere. oVirt is available now for Fedora 19 and Red Hat Enterprise Linux 6.4 (or similar). See release notes [1] for a list of the new features and bug fixed. [1] http://www.ovirt.org/OVirt_3.3.1_release_notes - Kiril

13 37