- Users - oVirt List Archives

Unable to start VMs after upgrade from 4.4.9 to 4.4.10
by Christoph Timm 28 Mar '22

28 Mar '22

Hi List, I receive the following error while starting some of our VMs after the upgrade to 4.4.10. VM v4-probe is down with error. Exit message: internal error: process exited while connecting to monitor: 2022-03-24T11:27:23.098838Z qemu-kvm: -blockdev {"node-name":"libvirt-1-format","read-only":false,"cache":{"direct":true,"no-flush":false},"driver":"qcow2","file":"libvirt-1-storage","backing":"libvirt-3-format"}: Failed to get "write" lock Is another process using the image [/rhev/data-center/mnt/lxskinner:_exports_skinner__2tb__1/28da0c79-b6f1-4740-bd24-e7bafcb62c75/images/90b28e7e-98a3-4f80-a136-c5a52c4a3e05/c1450651-b1e5-47fd-906b-8ebd62ace8a4]?. The example disk is located on a NFS share. Any idea how to tell oVirt that there is no other process using this disk? Best regards and thx Christoph

2 4

Re: [SOLVED] Re: Re: How to re-enroll (or renew) host certificates for a single-host hosted-engine deployment?
by Timothe Van Deputte 27 Mar '22

27 Mar '22

Hi Derek, Many thanks for your email, it has helped me a lot for troubleshooting my certificates issues on my homelab. I don't know if you solved the san issue, but I have made it work using --san=DNS:host.na.me I found this somewhere although I can't remember where (probably in between my hundreds tabs). Thanks again, Kind regards. Timothe 'NokiDev' Van Deputte

1 0

change mount point for hosted_storage
by tpike＠psc.edu 25 Mar '22

25 Mar '22

Hello: I have an oVirt 4.4.10 cluster that is working fine. All storage is on NFS. I would like to change the mount point for the hosted_storage domain from localhost:/... to <IP>/... This will be the same physical volume, all I want to do is not run my NFS mounts through my local hosts but instead mount directly from the NFS server. I have used the "hosted-engine --set-shared-config storage" command to change the mount point for the storage. Looking at the hosted-engine.conf file confirms that the new path is set correctly. When I look at the storage inside the hosted-engine, however, it still shows the old value. How can I get the cluster to use the new path instead of the old path? I changed it both using he_local and he_shared keys. Thanks! Tod Pike

1 1

Correct way to search VM by mac
by Gianluca Cecchi 25 Mar '22

25 Mar '22

Hello, today I had a problem about conflicting MAC. The source of problem was a VM transferred from an engine environment

2 3

Big problem on Ovirt 4.4
by Nenhum de Nos 25 Mar '22

25 Mar '22

Hi, I run a small test node and engine of ovirt since 4.3. Its in my home, but I kind messed up and now I can't use or reinstall it without loosing all my vm's data (at least this is the point my knowledge of ovirt is). I got the issue where I could not update yum since CentOS 8 mirrors would not answer. And I tried some solution I found in the list archives, and got really bad here. I had a power outage last Saturday and my node got to nonresponsive. No matter what I did, never left this state. Kept complaining about the CPU Type, I run it on Ryzen 3400G (used to run on Intel i5, also desktop CPU, and never had an issue, when I changed to Ryzen, every outage from power here is a problem), and the node wouldn't come back. So I tried to upgrade my cluster to 4.4 level (was 4.3) and it didn't help. So I tried to get back to 4.3 and a message said just empty clusters could do that. I then removed my ryzen node from it and it got back to 4.3.But now I could not install the node. I tried changing its name, no good. Failed on how to get packages from GLuster8 repo.That is where my story got sad. I tried to update my repo using the steps in the last post from https://lists.ovirt.org/archives/list/users@ovirt.org/thread/D3FEXQ5KOLN3SS…. Bad idea, and another one was I didn't do a backup of the engine. Now my engine won't start, the backup won't run: engine-backup --mode=backup --file=/root/backup_deuruim --log=/root/backup_deuruim.logStart of engine-backup with mode 'backup'scope: allarchive file: /root/backup_deuruimlog file: /root/backup_deuruim.logBacking up:Notifying engineNotifying engineFATAL: Failed notifying engine pg_dump: error: Dumping the contents of table "audit_log" failed: PQgetResult() failed.pg_dump: error: Error message from server: ERROR: MultiXactId 1076887572 has not been created yet -- apparent wraparoundpg_dump: error: The command was: COPY public.audit_log (audit_log_id, user_id, user_name, vm_id, vm_name, vm_template_id, vm_template_name, vds_id, vds_name, log_time, log_type_name, log_type, severity, message, processed, storage_pool_id, storage_pool_name, storage_domain_id, storage_domain_name, cluster_id, cluster_name, correlation_id, job_id, quota_id, quota_name, gluster_volume_id, gluster_volume_name, origin, custom_event_id, event_flood_in_sec, custom_data, deleted, call_stack, brick_id, brick_path, custom_id) TO stdout;2022-03-24 13:16:10 3461: FATAL: Database engine backup failed the Admin portal won't work, and I get a message on the login screen from engine saying I have a web console at port 9090. I don't get it. As my last resort I am here, trying at least to know a way I could backup it and install the engine elsewhere. All vm data is fine, but as the names are cryptographic, import them would have me guessing things, right? The number of VM's is low, 6 or 7, so if there is a way to do it manually, I would try. Installing it again would be my nightmare here. thanks, matheus ps: if needed, I can provide more info.

4 7

dnf update fails with oVirt 4.4 on centos 8 stream due to ansible package conflicts.
by Daniel McCoshen 25 Mar '22

25 Mar '22

Hey all, I'm running ovirt 4.4 in production (4.4.5-11-1.el8), and I'm attempting to update the OS on my hosts. The hosts are all centos 8 stream, and dnf update is failing on all of them with the following output: [root@ovirthost ~]# dnf update Last metadata expiration check: 1:36:32 ago on Thu 17 Feb 2022 12:01:25 PM CST. Error: Problem: package cockpit-ovirt-dashboard-0.15.1-1.el8.noarch requires ansible, but none of the providers can be installed - package ansible-2.9.27-2.el8.noarch conflicts with ansible-core > 2.11.0 provided by ansible-core-2.12.2-2.el8.x86_64 - package ansible-core-2.12.2-2.el8.x86_64 obsoletes ansible < 2.10.0 provided by ansible-2.9.27-2.el8.noarch - package ansible-core-2.12.2-2.el8.x86_64 obsoletes ansible < 2.10.0 provided by ansible-2.9.27-1.el8.noarch - package ansible-core-2.12.2-2.el8.x86_64 obsoletes ansible < 2.10.0 provided by ansible-2.9.17-1.el8.noarch - package ansible-core-2.12.2-2.el8.x86_64 obsoletes ansible < 2.10.0 provided by ansible-2.9.18-2.el8.noarch - package ansible-core-2.12.2-2.el8.x86_64 obsoletes ansible < 2.10.0 provided by ansible-2.9.20-2.el8.noarch - package ansible-core-2.12.2-2.el8.x86_64 obsoletes ansible < 2.10.0 provided by ansible-2.9.21-2.el8.noarch - package ansible-core-2.12.2-2.el8.x86_64 obsoletes ansible < 2.10.0 provided by ansible-2.9.23-2.el8.noarch - package ansible-core-2.12.2-2.el8.x86_64 obsoletes ansible < 2.10.0 provided by ansible-2.9.24-2.el8.noarch - cannot install the best update candidate for package cockpit-ovirt-dashboard-0.15.1-1.el8.noarch - cannot install the best update candidate for package ansible-2.9.27-2.el8.noarch - package ansible-2.9.20-1.el8.noarch is filtered out by exclude filtering - package ansible-2.9.16-1.el8.noarch is filtered out by exclude filtering - package ansible-2.9.19-1.el8.noarch is filtered out by exclude filtering - package ansible-2.9.23-1.el8.noarch is filtered out by exclude filtering (try to add '--allowerasing' to command line to replace conflicting packages or '--skip-broken' to skip uninstallable packages or '--nobest' to use not only best candidate packages) cockpit-ovirt-dashboard.noarch is at 0.15.1-1.el8, and it looks like that conflicting ansible-core package was added to the 8-stream repo two days ago. That's when I first noticed the issue, but I it might be older. When the eariler issues with the centos 8 deprecation happened, I had swapped out the repos on some of these hosts for the new ones, and have since added new hosts as well, using the updated repos. Both hosts that had been moved from the old repos, and ones created with the new repos are experienceing this issue. ansible-core is being pulled from the centos 8 stream AppStream repo, and the ansible package that cockpit-ovirt-dashboard.noarch is trying to use as a dependency is comming from ovirt-4.4-centos-ovirt44 I'm tempted to blacklist ansible-core in my dnf conf, but that seems like a hacky work-around and not the actual fix here. Thanks, Dan

7 8

gluster in ovirt-node in 4.5
by Yedidyah Bar David 24 Mar '22

24 Mar '22

Hi all, In relation to a recent question here (thread "[ovirt-devel] [ANN] Schedule for oVirt 4.5.0"), we are now blocked with the following chain of changes/dependencies: 1. ovirt-ansible-collection recently moved from ansible-2.9 to ansible-core 2.12. 2. ovirt-hosted-engine-setup followed it. 3. ovirt-release-host-node (the package including dependencies for ovirt-node) requires gluster-ansible-roles. 4. gluster-ansible-roles right now requires 'ansible >= 2.9' (not core), and I only checked one of its dependencies, gluster-ansible-infra, and this one requires 'ansible >= 2.5'. 5. ansible-core does not 'Provide: ansible', IIUC intentionally. So we should do one of: 1. Fix gluster-ansible* packages to work with ansible-core 2.12. 2. Only patch gluster-ansible* packages to require ansible-core, without making sure they actually work with it. This will satisfy all deps (I guess), make the thing installable, but will likely break when actually used. Not sure it's such a good option, but nonetheless relevant. Might make sense if someone is going to work on (1.) soon but not immediately. This is what would have happened in practice, if ansible-core would have 'Provide:'-ed ansible. 3. Patch ovirt-release-host-node to not require gluster-ansible* anymore. This means it will not be included in ovirt-node. Users that will want to use it will have to install the dependencies manually, somehow, presumably after (1.) is done independently. Our team (RHV integration) does not have capacity for (1.). I intend to do (3.) very soon, unless we get volunteers for doing (1.) or strong voices for (2.). Best regards, -- Didi

2 1

Commvault Backup fails to attach disk snapshots
by martin.kaufmann＠snt.at 24 Mar '22

24 Mar '22

Hello all, since we updated our Commvault to the version "service pack 26 hotfix 16", random VM backups are failing to attach disk snapshots to the backup proxy VM. We are running oVirt Version 4.4.10.6-1.el8 and the hypervisor is oVirt Node 4.4.9. These are the logs from the managerVM: ############## 2022-03-24 11:13:59,390+01 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HotPlugDiskVDSCommand] (default task-1578) [0aeb5794-5c2e-44c6-8fc5-34ec0e81d16b] Disk hot-plug: <?xml version="1.0" encoding="UTF-8"?><hotplug> <devices> <disk snapshot="no" type="file" device="disk"> <target dev="sda" bus="scsi"/> <source file="/rhev/data-center/mnt/blockSD/6da85fb1-ff4b-4665-ade3-0f32f83250bc/images/e3c292e0-dfd2-4cd5-a27f-f87308a18e64/8b524896-902c-445f-a33a-65335cb75eff"> <seclabel model="dac" type="none" relabel="no"/> </source> <driver name="qemu" io="threads" type="qcow2" error_policy="stop" cache="writethrough"/> <alias name="ua-e3c292e0-dfd2-4cd5-a27f-f87308a18e64"/> <address bus="0" controller="0" unit="0" type="drive" target="0"/> <serial>e3c292e0-dfd2-4cd5-a27f-f87308a18e64</serial> </disk> </devices> <metadata xmlns:ovirt-vm="http://ovirt.org/vm/1.0"> <ovirt-vm:vm> <ovirt-vm:device devtype="disk" name="sda"> <ovirt-vm:poolID>98d981da-d010-11ea-9e4d-00163e1be424</ovirt-vm:poolID> <ovirt-vm:volumeID>8b524896-902c-445f-a33a-65335cb75eff</ovirt-vm:volumeID> <ovirt-vm:shared>transient</ovirt-vm:shared> <ovirt-vm:imageID>e3c292e0-dfd2-4cd5-a27f-f87308a18e64</ovirt-vm:imageID> <ovirt-vm:domainID>6da85fb1-ff4b-4665-ade3-0f32f83250bc</ovirt-vm:domainID> </ovirt-vm:device> </ovirt-vm:vm> </metadata> </hotplug> 2022-03-24 11:13:59,898+01 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.HotPlugDiskVDSCommand] (default task-1578) [0aeb5794-5c2e-44c6-8fc5-34ec0e81d16b] Failed in 'HotPlugDiskVDS' method 2022-03-24 11:13:59,898+01 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HotPlugDiskVDSCommand] (default task-1578) [0aeb5794-5c2e-44c6-8fc5-34ec0e81d16b] Command 'org.ovirt.engine.core.vdsbroker.vdsbroker.HotPlugDiskVDSCommand' return value 'StatusOnlyReturn [status=Status [code=45, message=Requested operation is not valid: Domain already contains a disk with that address]]' 2022-03-24 11:13:59,898+01 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HotPlugDiskVDSCommand] (default task-1578) [0aeb5794-5c2e-44c6-8fc5-34ec0e81d16b] HostName = hypervisor1.domain 2022-03-24 11:13:59,898+01 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.HotPlugDiskVDSCommand] (default task-1578) [0aeb5794-5c2e-44c6-8fc5-34ec0e81d16b] Command 'HotPlugDiskVDSCommand(HostName = hypervisor1.domain, HotPlugDiskVDSParameters:{hostId='c2fd81cd-8fc8-410e-8333-a0a36b87ab2b', vmId='890c105d-333b-435e-8d8b-0b889f4f9c14', diskId='e3c292e0-dfd2-4cd5-a27f-f87308a18e64'})' execution failed: VDSGenericException: VDSErrorException: Failed to HotPlugDiskVDS, error = Requested operation is not valid: Domain already contains a disk with that address, code = 45 2022-03-24 11:13:59,898+01 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.HotPlugDiskVDSCommand] (default task-1578) [0aeb5794-5c2e-44c6-8fc5-34ec0e81d16b] FINISH, HotPlugDiskVDSCommand, return: , log id: 536a4414 2022-03-24 11:13:59,898+01 ERROR [org.ovirt.engine.core.bll.storage.disk.AttachDiskToVmCommand] (default task-1578) [0aeb5794-5c2e-44c6-8fc5-34ec0e81d16b] Command 'org.ovirt.engine.core.bll.storage.disk.AttachDiskToVmCommand' failed: EngineException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to HotPlugDiskVDS, error = Requested operation is not valid: Domain already contains a disk with that address, code = 45 (Failed with error FailedToPlugDisk and code 45) 2022-03-24 11:13:59,899+01 INFO [org.ovirt.engine.core.bll.CommandCompensator] (default task-1578) [0aeb5794-5c2e-44c6-8fc5-34ec0e81d16b] Command [id=87712152-4660-40ca-b292-397796c735d5]: Compensating NEW_ENTITY_ID of org.ovirt.engine.core.common.businessentities.storage.DiskVmElement; snapshot: VmDeviceId:{deviceId='e3c292e0-dfd2-4cd5-a27f-f87308a18e64', vmId='890c105d-333b-435e-8d8b-0b889f4f9c14'}. 2022-03-24 11:13:59,900+01 INFO [org.ovirt.engine.core.bll.CommandCompensator] (default task-1578) [0aeb5794-5c2e-44c6-8fc5-34ec0e81d16b] Command [id=87712152-4660-40ca-b292-397796c735d5]: Compensating NEW_ENTITY_ID of org.ovirt.engine.core.common.businessentities.VmDevice; snapshot: VmDeviceId:{deviceId='e3c292e0-dfd2-4cd5-a27f-f87308a18e64', vmId='890c105d-333b-435e-8d8b-0b889f4f9c14'}. 2022-03-24 11:13:59,910+01 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-1578) [0aeb5794-5c2e-44c6-8fc5-34ec0e81d16b] EVENT_ID: USER_FAILED_ATTACH_DISK_TO_VM(2,017), Failed to attach Disk VM1_Disk1 to VM backupproxyVM (User: backupagent@internal-authz). 2022-03-24 11:13:59,910+01 INFO [org.ovirt.engine.core.bll.storage.disk.AttachDiskToVmCommand] (default task-1578) [0aeb5794-5c2e-44c6-8fc5-34ec0e81d16b] Lock freed to object 'EngineLock:{exclusiveLocks='[e3c292e0-dfd2-4cd5-a27f-f87308a18e64=DISK]', sharedLocks=''}' 2022-03-24 11:13:59,910+01 ERROR [org.ovirt.engine.api.restapi.resource.AbstractBackendResource] (default task-1578) [] Operation Failed: [Failed to hot-plug disk] ################### Here are the logs from the hypervisor: ################## 2022-03-24 11:13:59,712+0100 INFO (jsonrpc/4) [virt.vm] (vmId='890c105d-333b-435e-8d8b-0b889f4f9c14') Hotplug disk xml: <?xml version='1.0' encoding='utf-8'?> <disk device="disk" snapshot="no" type="file"> <address bus="0" controller="0" target="0" type="drive" unit="0" /> <source file="/var/lib/vdsm/transient/6da85fb1-ff4b-4665-ade3-0f32f83250bc-8b524896-902c-445f-a33a-65335cb75eff.pxhtm0_4"> <seclabel model="dac" relabel="no" type="none" /> </source> <target bus="scsi" dev="sdbzk" /> <serial>e3c292e0-dfd2-4cd5-a27f-f87308a18e64</serial> <driver cache="writethrough" error_policy="stop" io="threads" name="qemu" type="qcow2" /> <alias name="ua-e3c292e0-dfd2-4cd5-a27f-f87308a18e64" /> </disk> (vm:3851) 2022-03-24 11:13:59,721+0100 ERROR (jsonrpc/4) [virt.vm] (vmId='890c105d-333b-435e-8d8b-0b889f4f9c14') Hotplug failed (vm:3859) Traceback (most recent call last): File "/usr/lib/python3.6/site-packages/vdsm/virt/vm.py", line 3857, in hotplugDisk self._dom.attachDevice(driveXml) File "/usr/lib/python3.6/site-packages/vdsm/virt/virdomain.py", line 101, in f ret = attr(*args, **kwargs) File "/usr/lib/python3.6/site-packages/vdsm/common/libvirtconnection.py", line 131, in wrapper ret = f(*args, **kwargs) File "/usr/lib/python3.6/site-packages/vdsm/common/function.py", line 94, in wrapper return func(inst, *args, **kwargs) File "/usr/lib64/python3.6/site-packages/libvirt.py", line 682, in attachDevice raise libvirtError('virDomainAttachDevice() failed') libvirt.libvirtError: Requested operation is not valid: Domain already contains a disk with that address ##################### Any idea what could cause these errors? Best regards, Martin

1 0

Re: No bootable device
by nicolas＠devels.es 24 Mar '22

24 Mar '22

Hi, The checkbox is already checked, when you mark a disk as "OS" it's marked automatically. Still it won't boot. Thanks. El 2022-03-23 15:23, Angus Clarke escribió: > Hi Nicolas > > In oVirt 4.3: > > Compute -> Virtual Machines -> Select VM > > On the VM screen: > > Disks -> Highlight disk -> Edit > > Check the bootable tick box > > Hope that helps > Angus > > ------------------------- > > FROM: nicolas(a)devels.es <nicolas(a)devels.es> > SENT: 23 March 2022 14:00 > TO: users(a)ovirt.org <users(a)ovirt.org> > SUBJECT: [ovirt-users] No bootable device > > Hi, > > We're running oVirt 4.4.8.6. We have uploaded a qcow2 image > (metasploit > v.3, FWIW) using the GUI (Storage -> Disks -> Upload -> Start). The > image is in qcow2 format. No options on the right side were checked. > The > upload went smoothly, so we now tried to attach the disk to a VM. > > To do that, we opened the VM -> Disks -> Attach and selected the disk. > > As interface, VirtIO-iSCSI was chosen, and the disk was marked as OS, > so > the "bootable" checkbox was selected. > > The VM was later powered on, but when accessing the console the > message > "No bootable device." appears. We're pretty sure this is a bootable > image, because it was tested on other virtualization infrastructure > and > it boots well. We also tried to upload the image in RAW format but the > > result is the same. > > What are we missing here? Is anything else needed to do so the disk is > > bootable? > > Thanks. > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: > https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt… > [1] > oVirt Code of Conduct: > https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt… > [2] > List Archives: > https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.ovi… > [3] > > > Links: > ------ > [1] > https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt… > [2] > https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt… > [3] > https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.ovi…

1 0

VDSM Issue after Upgrade of Node in HCI
by Abe E 23 Mar '22

23 Mar '22

So I have my 2nd node in my cluster that showed an upgrade option in OVIRT. I put it in maint mode and ran the upgrade, it went through it but at one point it lost its internet connection or connection within the gluster, it didnt get to the reboot process and simply lost its connection to the engine from there. I can see the gluster is still running and was able to keep all 3 glusters syncing but it seems the VDSM may be the culprit here. ovirt-ha-agent wont start and the hosted-engine --connect-storage returns: Traceback (most recent call last): File "/usr/lib64/python3.6/runpy.py", line 193, in _run_module_as_main "__main__", mod_spec) File "/usr/lib64/python3.6/runpy.py", line 85, in _run_code exec(code, run_globals) File "/usr/lib/python3.6/site-packages/ovirt_hosted_engine_setup/connect_storage_server.py", line 30, in <module> timeout=ohostedcons.Const.STORAGE_SERVER_TIMEOUT, File "/usr/lib/python3.6/site-packages/ovirt_hosted_engine_ha/client/client.py", line 312, in connect_storage_server sserver.connect_storage_server(timeout=timeout) File "/usr/lib/python3.6/site-packages/ovirt_hosted_engine_ha/lib/storage_server.py", line 411, in connect_storage_server timeout=timeout, File "/usr/lib/python3.6/site-packages/ovirt_hosted_engine_ha/lib/util.py", line 474, in connect_vdsm_json_rpc __vdsm_json_rpc_connect(logger, timeout) File "/usr/lib/python3.6/site-packages/ovirt_hosted_engine_ha/lib/util.py", line 415, in __vdsm_json_rpc_connect timeout=VDSM_MAX_RETRY * VDSM_DELAY RuntimeError: Couldn't connect to VDSM within 60 seconds VDSM just keeps loop restart and failing, vdsm-tool configure --force throws this : [root@ovirt-2 ~]# vdsm-tool configure --force Checking configuration status... sanlock is configured for vdsm abrt is already configured for vdsm Current revision of multipath.conf detected, preserving lvm is configured for vdsm Managed volume database is already configured libvirt is already configured for vdsm SUCCESS: ssl configured to true. No conflicts Running configure... libsepol.context_from_record: type insights_client_var_lib_t is not defined libsepol.context_from_record: could not create context structure libsepol.context_from_string: could not create context structure libsepol.sepol_context_to_sid: could not convert system_u:object_r:insights_client_var_lib_t:s0 to sid invalid context system_u:object_r:insights_client_var_lib_t:s0 libsemanage.semanage_validate_and_compile_fcontexts: setfiles returned error code 255. Traceback (most recent call last): File "/usr/bin/vdsm-tool", line 209, in main return tool_command[cmd]["command"](*args) File "/usr/lib/python3.6/site-packages/vdsm/tool/__init__.py", line 40, in wrapper func(*args, **kwargs) File "/usr/lib/python3.6/site-packages/vdsm/tool/configurator.py", line 145, in configure _configure(c) File "/usr/lib/python3.6/site-packages/vdsm/tool/configurator.py", line 92, in _configure getattr(module, 'configure', lambda: None)() File "/usr/lib/python3.6/site-packages/vdsm/tool/configurators/sebool.py", line 88, in configure _setup_booleans(True) File "/usr/lib/python3.6/site-packages/vdsm/tool/configurators/sebool.py", line 60, in _setup_booleans sebool_obj.finish() File "/usr/lib/python3.6/site-packages/seobject.py", line 340, in finish self.commit() File "/usr/lib/python3.6/site-packages/seobject.py", line 330, in commit rc = semanage_commit(self.sh) OSError: [Errno 0] Error Anyone have ideas where I could recover this, I am not sure if something corrupted on update or on a reboot -- I would prefer updating notes from the CLI next time but unfortunately I have not looked that far, it would have helped me see what failed and where much easier.

2 10