- Users - oVirt List Archives

Re: [Users] so, what do you want next in oVirt?
by Itamar Heim 02 Sep '13

02 Sep '13

On 09/02/2013 05:07 PM, NOC wrote: > On 08/20/2013 11:19 PM, Itamar Heim wrote: >> earlier in the year we did a survey for feature requests / >> improvements / etc. >> >> since a lot of things were added, and priorities usually change, I'd >> like to ask again for "what do you need the most from oVirt / what are >> your pain points" next? >> > > I'd like to see some way to ensure redundant groups of VMs are running > on physically different hosts. > E.g. if I have 2 or 3 dns servers running in a VM, I'd like to have them > running on different hosts if they are available. > > I'd like these VMs to "repel" each other w.r.t. the physical running > space. I imagine sometimes one could want the opposite as well, that two > VM's that depend on each other over the network are running as close > together as possible... (i.e. attract each other) > > I'm sure this is all scriptable, but it seems to fit with the management > part of oVirt very well. while scriptable, its been made an api in 3.3 (which allows to easily extend the scheduler, until such features are incorporated into mainline codebase as out of the box): http://www.ovirt.org/Features/oVirt_scheduler http://www.ovirt.org/Features/oVirtSchedulerAPI its also going to be covered here tomorrow: http://lists.ovirt.org/pipermail/users/2013-August/015936.html (other than that - yes, above feature is positive/negative vm affinity for scheduling and should be on the list)

1 0

[Users] oVirt 3.3 Release Go/No-Go meeting
by Ofer Schreiber 02 Sep '13

02 Sep '13

------=_Part_8326286_1829562358.1378130804020 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit The following is a new meeting request: Subject: oVirt 3.3 Release Go/No-Go meeting Organizer: "Ofer Schreiber" <oschreib(a)redhat.com> Location: #ovirt IRC channel @oftc Time: Tuesday, September 3, 2013, 4:00:00 PM - 4:30:00 PM GMT +02:00 Jerusalem Invitees: board(a)ovirt.org; users(a)ovirt.org; engine-devel(a)ovirt.org *~*~*~*~*~*~*~*~*~* oVirt 3.3 Release Go/No-Go meeting ------=_Part_8326286_1829562358.1378130804020 Content-Type: text/calendar; charset=utf-8; method=REQUEST; name=meeting.ics Content-Transfer-Encoding: 7bit BEGIN:VCALENDAR PRODID:Zimbra-Calendar-Provider VERSION:2.0 METHOD:REQUEST BEGIN:VTIMEZONE TZID:Asia/Jerusalem BEGIN:STANDARD DTSTART:16010101T020000 TZOFFSETTO:+0200 TZOFFSETFROM:+0300 RRULE:FREQ=YEARLY;WKST=MO;INTERVAL=1;BYMONTH=10;BYDAY=1SU TZNAME:IST END:STANDARD BEGIN:DAYLIGHT DTSTART:16010101T020000 TZOFFSETTO:+0300 TZOFFSETFROM:+0200 RRULE:FREQ=YEARLY;WKST=MO;INTERVAL=1;BYMONTH=3;BYDAY=-1FR TZNAME:IDT END:DAYLIGHT END:VTIMEZONE BEGIN:VEVENT UID:e4bb4608-7bca-4ed5-a0a3-7abc6a64af7a SUMMARY:oVirt 3.3 Release Go/No-Go meeting LOCATION:#ovirt IRC channel @oftc ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE:mailto:board@o virt.org ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE:mailto:users@o virt.org ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE:mailto:engine- devel(a)ovirt.org ORGANIZER;CN=Ofer Schreiber:mailto:oschreib@redhat.com DTSTART;TZID="Asia/Jerusalem":20130903T160000 DTEND;TZID="Asia/Jerusalem":20130903T163000 STATUS:CONFIRMED CLASS:PUBLIC X-MICROSOFT-CDO-INTENDEDSTATUS:BUSY TRANSP:OPAQUE LAST-MODIFIED:20130902T140644Z DTSTAMP:20130902T140644Z SEQUENCE:0 DESCRIPTION:The following is a new meeting request:\n\nSubject: oVirt 3.3 Re lease Go/No-Go meeting \nOrganizer: "Ofer Schreiber" <oschreib(a)redhat.com> \ n\nLocation: #ovirt IRC channel @oftc \nTime: Tuesday\, September 3\, 2013\, 4:00:00 PM - 4:30:00 PM GMT +02:00 Jerusalem\n \nInvitees: board(a)ovirt.org\ ; users(a)ovirt.org\; engine-devel(a)ovirt.org \n\n\n*~*~*~*~*~*~*~*~*~*\n\noVir t 3.3 Release Go/No-Go meeting BEGIN:VALARM ACTION:DISPLAY TRIGGER;RELATED=START:-PT5M DESCRIPTION:Reminder END:VALARM END:VEVENT END:VCALENDAR ------=_Part_8326286_1829562358.1378130804020--

1 0

Re: [Users] Cannot download some noarch when exec 'yum install ovirt-engine'
by Itamar Heim 02 Sep '13

02 Sep '13

On 08/31/2013 01:32 PM, 陈良 wrote: > > Thanks for your help! > I do not use any repo, I just get the guidiline from the > website:http://www.ovirt.org/Download. > And my host os is just install by the cd from download on the fedora > govement website. > how Can I solve this problems. > > > > > > 在 2013-08-30 23:57:13，"Itamar Heim" <iheim(a)redhat.com> 写道： >>On 08/30/2013 10:46 AM, 陈良 wrote: >>> Hi, Everyone >>> When I exec 'yum install ovirt-engine',there are some problems ,as below: >>> Error Downloading Packages: >>> ovirt-log-collector-3.2.2-1.fc18.noarch: [Errno 256] No more mirrors >>> to try. >>> ovirt-log-collector-3.2.2-1.fc18.noarch: Downloaded package >>> ovirt-log-collector-3.2.2-1.fc18.noarch, from ovirt-stable, but it was >>> invalid. >>> ovirt-host-deploy-1.0.2-1.fc18.noarch: [Errno 256] No more mirrors to >>> try. >>> ovirt-host-deploy-1.0.2-1.fc18.noarch: Downloaded package >>> ovirt-host-deploy-1.0.2-1.fc18.noarch, from ovirt-stable, but it was >>> invalid. >>> ovirt-image-uploader-3.2.2-1.fc18.noarch: Downloaded package >>> ovirt-image-uploader-3.2.2-1.fc18.noarch, from ovirt-stable, but it was >>> invalid. >>> ovirt-image-uploader-3.2.2-1.fc18.noarch: [Errno 256] No more mirrors >>> to try. >>> ovirt-host-deploy-java-1.0.2-1.fc18.noarch: [Errno 256] No more >>> mirrors to try. >>> ovirt-host-deploy-java-1.0.2-1.fc18.noarch: Downloaded package >>> ovirt-host-deploy-java-1.0.2-1.fc18.noarch, fr om ovirt-stable, but it >>> was invalid. >>> ovirt-iso-uploader-3.2.2-1.fc18.noarch: [Errno 256] No more mirrors >>> to try. >>> ovirt-iso-uploader-3.2.2-1.fc18.noarch: Downloaded package >>> ovirt-iso-uploader-3.2.2-1.fc18.noarch, from ovirt-stable, but it was >>> invalid. >>> my host is fedora 18 >>> Thanks >> >>what is your repo configuration / which installation guidelines are you >>following? >> >>thanks, >> Itamar >> > > > ofer - thoughts on --^

1 0

[Users] How to add internal networks
by Frank Wall 01 Sep '13

01 Sep '13

Hi, I'm using oVirt 3.2 on a single hosts with only one NIC. Currently there is only the ovirtmgmt network configured. But I need to add more networks, especially some internal networks like 192.168.x.y/24 need to be usable for VMs. From the oVirt Admin Portal this does not seem to be possible. It seems I cannot reuse the ovirtmgmt interface for any other network. Is this true? How am I supposed to add several networks in oVirt if I have just one NIC? Thanks - Frank

6 11

[Users] vm network problem
by alireza sadeh seighalan 31 Aug '13

31 Aug '13

hi everyone i am a newbie in ovirt . i installed ovirt 3.2 on centos6.4. i ran VM's on node manager but i cant connect to them. i installed ovirt in a network that doesnt access to internet. i have only one active interface on host (host and ovirt node manager on a server). should i run dhcp or there is any other solution?thanks in advance

2 1

[Users] Vlan tagging and VM Interfaces
by Andrew Lau 31 Aug '13

31 Aug '13

Hi, I've got a scenario: Router->Node (vlan tag 100, vlan tag 101)->VM Does the node take care of the tagging or will the VM's interface also need to be tagged. Right now the VM's interface is not in a VLAN and it can't connect to the router. Thanks, Andrew

2 1

[Users] Ovirt / Gluster topology + DR site
by Steve Dainard 31 Aug '13

31 Aug '13

Hello all, I'm looking for some opinions on our current topology and how a disaster recovery plan would shake out in the real world on an ovirt/gluster clustered system. Please ignore the RH references in the attached diagram, we're still on the fence if we're going with support or not. [image: Inline image 1] The Plan At HQ site: Two Gluster nodes running as replica's. ~4 Virt notes 1 Manager node (likely running on as separate kvm HA VM) Offsite: 1 Gluster node acting as a geo-replication target 1 Virt node 1 Manager in standby (waiting to recover db backup) *Even better would be using both nodes at this site as one striped gluster volume, standby Manager, and Virt nodes to eliminate the standby Manager box, decrease costs and increase virt resources, but I'm not sure this is doable quite yet.* During regular operations we're replicating our gluster storage offsite with geo-replication. In the event of a disaster (for simplicity we'll say the server room becomes unusable) I would want to recover the Manager at the offsite location from a backup, add the geo-replicated gluster storage domain as the normal domain, then start spinning up the business critical VM's. With a router in-place and some external DNS changes we should be able to keep our VPN accessible and all our internal resources available to mobile/home workers, or in this simple case even from our normal office location (already have the site-to-site VPN active). I'm planning on using a vpls solution to extend the VM subnet and storage/virt subnet across both sites so we don't need to worry about dns/IP changes in the middle of recovery. I think the biggest question so far is can we smoothly replace the normal storage domain on ovirt with the geo-replicated storage domain in the DR situation off-site? I've tried to layout most of the high level stuff here so if anyone sees any flaws or potential gotcha's feel free to chime in. I can provide more detail if necessary. Thanks! *Steve *

2 1

[Users] oVirt 3.3 fails to find spice-html5
by James A. Peltier 31 Aug '13

31 Aug '13

i just installed oVirt 3.3 Beta RPMs on a fresh installation of CentOS 6 on my laptop with all patches applied yum -y localinstall http://resources.ovirt.org/releases/3.3/rpm/EL/6/noarch/ovirt-release-el6-8… yum -y localinstall http://www.muug.mb.ca/pub/epel/6/i386/epel-release-6-8.noarch.rpm After editing the /etc/yum.repos.d/el6-ovirt.repo to enable beta and then trying to install oVirt engine it complains about spice-html5 being unavailable. Is this a bug, or is it temporary. -- James A. Peltier Manager, IT Services - Research Computing Group Simon Fraser University - Burnaby Campus Phone : 778-782-6573 Fax : 778-782-3045 E-Mail : jpeltier(a)sfu.ca Website : http://www.sfu.ca/itservices “A successful person is one who can lay a solid foundation from the bricks others have thrown at them.” -David Brinkley via Luke Shaw

2 1

[Users] Register now for KVM Forum and the oVirt developers summit!
by Dave Neary 30 Aug '13

30 Aug '13

Hi everyone, The KVM Forum in Edinburgh this year will have lots of great oVirt related content this year: http://events.linuxfoundation.org/events/kvm-forum And on day 3 of the conference, Wednesday October 23rd, we will have an oVirt Developers Summit, where we will have a small number of oVirt specific presentations, and working sessions to talk about the future of oVirt. Register now - it's free for the first 200 people to sign up! http://events.linuxfoundation.org/events/kvm-forum/attend/register We want to get a critical mass of oVirt developers in the same room in Edinburgh to make good progress on the oVirt 3.4 and beyond project planning. We're still putting together a full schedule of oVirt related content, specifically for the KVM Forum, but already we have a good list of oVirt content for the week: Monday, October 21: 11:00am - RAM Snapshots in oVirt - Arik Hadas, Red Hat 12:00pm - oVirt and Cloud-Init integration - Omer Frenkel, Red Hat 2:20pm - Empowering Data Center Virtualization Using KVM - Livnat Peer, Red Hat 4:40pm - Converged Infrastrucure with Open Source - Theron Conrey Tuesday, October 22: 11:10am - Notes on Taking KVM-on-KVM Nested Virtualization for a Spin - Kashyap Chamarthy, Red Hat 12:10pm - Cloud Computing with KVM - Tony Gargya, IBM Wednesday, October 23: 11:05am - (Tutorial) Scripting And Integration with the oVirt Engine - Oved Ourfali, Red Hat Once I have a complete list of oVirt related content in the KVM Forum and oVirt developer summit, I will come back to the list. Reserve your spot now! The first 200 to register for the KVM Forum can go free, and get a discount for the entire conference (including LinuxCon Euroope and CloudOpen Europe). Regards, Dave. -- Dave Neary - Community Action and Impact Open Source and Standards, Red Hat - http://community.redhat.com Ph: +33 9 50 71 55 62 / Cell: +33 6 77 01 92 13

1 0

[Users] Cannot download some noarch when exec 'yum install ovirt-engine'
by 陈良 30 Aug '13

30 Aug '13

------=_Part_375027_2126123223.1377848768974 Content-Type: text/plain; charset=GBK Content-Transfer-Encoding: 7bit Hi, Everyone When I exec 'yum install ovirt-engine',there are some problems ,as below: Error Downloading Packages: ovirt-log-collector-3.2.2-1.fc18.noarch: [Errno 256] No more mirrors to try. ovirt-log-collector-3.2.2-1.fc18.noarch: Downloaded package ovirt-log-collector-3.2.2-1.fc18.noarch, from ovirt-stable, but it was invalid. ovirt-host-deploy-1.0.2-1.fc18.noarch: [Errno 256] No more mirrors to try. ovirt-host-deploy-1.0.2-1.fc18.noarch: Downloaded package ovirt-host-deploy-1.0.2-1.fc18.noarch, from ovirt-stable, but it was invalid. ovirt-image-uploader-3.2.2-1.fc18.noarch: Downloaded package ovirt-image-uploader-3.2.2-1.fc18.noarch, from ovirt-stable, but it was invalid. ovirt-image-uploader-3.2.2-1.fc18.noarch: [Errno 256] No more mirrors to try. ovirt-host-deploy-java-1.0.2-1.fc18.noarch: [Errno 256] No more mirrors to try. ovirt-host-deploy-java-1.0.2-1.fc18.noarch: Downloaded package ovirt-host-deploy-java-1.0.2-1.fc18.noarch, from ovirt-stable, but it was invalid. ovirt-iso-uploader-3.2.2-1.fc18.noarch: [Errno 256] No more mirrors to try. ovirt-iso-uploader-3.2.2-1.fc18.noarch: Downloaded package ovirt-iso-uploader-3.2.2-1.fc18.noarch, from ovirt-stable, but it was invalid. my host is fedora 18 Thanks ------=_Part_375027_2126123223.1377848768974 Content-Type: text/html; charset=GBK Content-Transfer-Encoding: 7bit <div style="line-height:1.7;color:#000000;font-size:14px;font-family:arial"><DIV>Hi, Everyone</DIV> <DIV>When I exec 'yum install ovirt-engine',there are some problems ,as below:</DIV> <DIV> </DIV> <DIV style="COLOR: #880000; FONT-SIZE: 13px">Error Downloading Packages:<BR>  ovirt-log-collector-3.2.2-1.fc18.noarch: [Errno 256] No more mirrors to try.<BR>  ovirt-log-collector-3.2.2-1.fc18.noarch: Downloaded package ovirt-log-collector-3.2.2-1.fc18.noarch, from ovirt-stable, but it was invalid.<BR>  ovirt-host-deploy-1.0.2-1.fc18.noarch: [Errno 256] No more mirrors to try.<BR>  ovirt-host-deploy-1.0.2-1.fc18.noarch: Downloaded package ovirt-host-deploy-1.0.2-1.fc18.noarch, from ovirt-stable, but it was invalid.<BR>  ovirt-image-uploader-3.2.2-1.fc18.noarch: Downloaded package ovirt-image-uploader-3.2.2-1.fc18.noarch, from ovirt-stable, but it was invalid.<BR>  ovirt-image-uploader-3.2.2-1.fc18.noarch: [Errno 256] No more mirrors to try.<BR>  ovirt-host-deploy-java-1.0.2-1.fc18.noarch: [Errno 256] No more mirrors to try.<BR>  ovirt-host-deploy-java-1.0.2-1.fc18.noarch: Downloaded package ovirt-host-deploy-java-1.0.2-1.fc18.noarch, from ovirt-stable, but it was invalid.<BR>  ovirt-iso-uploader-3.2.2-1.fc18.noarch: [Errno 256] No more mirrors to try.<BR>  ovirt-iso-uploader-3.2.2-1.fc18.noarch: Downloaded package ovirt-iso-uploader-3.2.2-1.fc18.noarch, from ovirt-stable, but it was invalid.<BR></DIV> <DIV style="COLOR: #880000; FONT-SIZE: 13px"> </DIV> <DIV style="COLOR: #000000; FONT-SIZE: 13px">my host is fedora 18</DIV> <DIV style="COLOR: #000000; FONT-SIZE: 13px">Thanks</DIV></div><br><br><span title="neteasefooter"><span id="netease_mail_footer"></span></span> ------=_Part_375027_2126123223.1377848768974--

2 1