- Users - oVirt List Archives

[Users] What's going on with images on the wiki
by Karsten 'quaid' Wade 13 Dec '12

13 Dec '12

This is an OpenPGP/MIME signed message (RFC 2440 and 3156) --------------enig8EFCB4C6FA6FBF29C5B15E65 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable =3D=3D Summary =3D=3D Since the migration to OpenShift, due to a misconfiguration of MediaWiki, we were writing images uploaded to the wiki to a non-persistent data store location. This means that most images uploaded since the migration may have been destroyed, including archives of past versions of images. =3D=3D What's next =3D=3D Jason Brooks and I diagnosed the problem and fixed it last night. We didn't completely figure out which images were removed, but it's likely to be most or all the images since the migration. For any images you still have -- possibly including older version of the images -- we can likely reinsert them in to their (new) location in the filesystem and MediaWiki will pick them up. (Older versions are stored in 'images/archives/'. Depending on the trickiness of the problem, we may be able to reinsert the archived images.) Email me with details of what images you have, page names, and so forth. I'll work to get each one back where it belongs. Feel free to file a ticket on Trac at http://fedorahosted.org/ovirt to help keep track of the details. Or you can reply with details (but not images) If you've lost any work as a result of this mistake, please accept my apology. It was a mistake that didn't show itself in testing post-migration (which points to failings in the testing.) =3D=3D Questions and comments =3D=3D It's possible we haven't optimized our solution from here. Feel free to chime in with your thoughts and questions. (Please read the 'Details' section below first.) =3D=3D Details =3D=3D When I configured the MediaWiki instance on OpenShift, I made the writeable 'images' directory a symlink to what I thought was the persistent data store location. This appears as 'wiki/data', where the MediaWiki code and content live in 'wiki/php'. cd wiki ls -hal | grep images images =3D> ../data That is, 'wiki/php/images' was a symlink to 'wiki/data'. (Un)fortunately, 'wiki' is all entirely in a git repository. That means I copied the images from the old MediaWiki instance in to a git repository that OpenShift uses to completely rewrite the folder structure on the server every time the code is checked in ('git push'.) As it happens, the true persistent data store is '../../data', that is, one directory *above* the 'wiki' directory. When you put content in there, it is not overwritten with each 'git push'. What happened this week was I did an outage window on Monday to push a change to the app to make it hot deployable. (I actually did the same thing last week, but I don't know if anyone had uploaded any new images.)= When I did a 'git push' of my changes, I apparently overwrote the 'wiki/data/' directory with my older copy of the content. I did a 'git pull' before pushing but nothing came down; I'm not sure why but I believe it has to do with the way OpenShift is configured. Since Monday night, people began noticing images broken, complaints on making thumbnails, and so forth. Jason and I worked on the problem on Tuesday and figured out the solution. He moved all the content to the persistent data store (also, got our quota doubled to 2 GB as we were almost at 1 GB), and removed the data from the git repo. In the end, Jason added a build hook that i) makes sure the '../../data/images' directory is present, then ii) creates the necessary symlink in the 'wiki/' structure after the code is checked in. The same was done for 'compiled_templates', which was previously a symlink for the MediaWiki Widgets extension. (That symlink was also incorrectly written, so it may have been part of problems with the new Widgets extensions?) Thank you for your understanding, and I apologize for the inconvenience. - Karsten --=20 Karsten 'quaid' Wade, Sr. Analyst - Community Growth http://TheOpenSourceWay.org .^\ http://community.redhat.com @quaid (identi.ca/twitter/IRC) \v' gpg: AD0E0C41 --------------enig8EFCB4C6FA6FBF29C5B15E65 Content-Type: application/pgp-signature; name="signature.asc" Content-Description: OpenPGP digital signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) Comment: Using GnuPG with undefined - http://www.enigmail.net/ iD8DBQFQySxp2ZIOBq0ODEERAg74AKDJrzjXDheKGbbBgGzvAnzQzLZxogCggmcf zLGsyOzkjimW225oVfvb/Zs= =3xrL -----END PGP SIGNATURE----- --------------enig8EFCB4C6FA6FBF29C5B15E65--

2 1

[Users] OpenLDAP Simple Authentication in Ovirt Engine
by Thierry Kauffmann 13 Dec '12

13 Dec '12

Hi, I am currently testing Ovirt 3.1 standalone on Fedora 17. Until now, I could only use the default user admin@internal. Our Directory at the University is OpenLDAP. We use it for authentication WITHOUT Kerberos : Simple authentication. I wonder how to use this backend to authenticate users and manage groups in Ovirt. Has anyone already set this up ? How to configure Ovirt to use Simple Authentication (No Kerberos). Cheers, -- signature-TK Thierry Kauffmann Chef du Service Informatique // Faculté des Sciences // Université de Montpellier 2 SIF - Service Informatique de la Faculté des Sciences <http://sif.info-ufr.univ-montp2.fr/> UM2 - Université de Montpellier 2 <http://www.univ-montp2.fr/> Service informatique de la Faculté des Sciences (SIF) Université de Montpellier 2 CC437 // Place Eugène Bataillon // 34095 Montpellier Cedex 5 Tél : 04 67 14 31 58 email : thierry.kauffmann(a)univ-montp2.fr <mailto:thierry.kauffmann@univ-montp2.fr> web : http://sif.info-ufr.univ-montp2.fr/ http://www.fdsweb.univ-montp2.fr/

4 5

[Users] libvirt 1.0
by Cristian Falcas 13 Dec '12

13 Dec '12

Hi, Is it safe to upgrade to libvirt-1.0? Best regards, Cristi

2 3

[Users] theoretical scenario
by Jonathan Horne 13 Dec '12

13 Dec '12

--_000_9BE6F493F83A594DA60C45E6A09DC5AC016D5B42AUSP01DAG0201co_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable My production deployment is approaching soon, so i am trying to get some fi= nal tasks and concepts completed before that day arrives. Lets say, that i= have a working domain, but that an impending disaster is about to destroy = the whole thing. How can i get the Vms out, and then how can i reverse thi= s and get them into a completely new and unrelated/unconnected ovirt domain= ? Any advice, or a doc or link would be much appreciated. Thanks, jonathan ________________________________ This is a PRIVATE message. If you are not the intended recipient, please de= lete without copying and kindly advise us by e-mail of the mistake in deliv= ery. NOTE: Regardless of content, this e-mail shall not operate to bind SKO= POS to any order or other contract unless pursuant to explicit written agre= ement or government initiative expressly permitting the use of e-mail for s= uch purpose. --_000_9BE6F493F83A594DA60C45E6A09DC5AC016D5B42AUSP01DAG0201co_ Content-Type: text/html; charset="us-ascii" Content-ID: <0AF4B2D24594B94C973C6872FC97F3F3(a)collaborationhost.net> Content-Transfer-Encoding: quoted-printable <html> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > </head> <body style=3D"word-wrap:break-word; color:rgb(0,0,0); font-size:14px; font= -family:Calibri,sans-serif"> <div> <div> <div>My production deployment is approaching soon, so i am trying to get so= me final tasks and concepts completed before that day arrives.  Lets s= ay, that i have a working domain, but that an impending disaster is about t= o destroy the whole thing.  How can i get the Vms out, and then how can i reverse this and get them into a compl= etely new and unrelated/unconnected ovirt domain?</div> <div><br> </div> <div>Any advice, or a doc or link would be much appreciated.</div> <div><br> </div> <div>Thanks,</div> <div>jonathan</div> <div> <div></div> </div> </div> </div> <br> <hr> <font color=3D"Gray" face=3D"Arial" size=3D"1">This is a PRIVATE message. I= f you are not the intended recipient, please delete without copying and kin= dly advise us by e-mail of the mistake in delivery. NOTE: Regardless of con= tent, this e-mail shall not operate to bind SKOPOS to any order or other contract unless pursuant to explicit wri= tten agreement or government initiative expressly permitting the use of e-m= ail for such purpose.</font> </body> </html> --_000_9BE6F493F83A594DA60C45E6A09DC5AC016D5B42AUSP01DAG0201co_--

4 4

[Users] mislabelled template source
by Jim Kinney 13 Dec '12

13 Dec '12

Greetings, I've built several new templates from the blank template and a ISO install of various OS's. However, when I built a new VM using the new template(s), the new VM still says it's based from the blank template. I expected it to say it was from the "template-foo" U specified. The VM is correctly built from the template so I think it's a generation/database issue. -- -- James P. Kinney III * *Every time you stop a school, you will have to build a jail. What you gain at one end you lose at the other. It's like feeding a dog on his own tail. It won't fatten the dog. - Speech 11/23/1900 Mark Twain * http://electjimkinney.org http://heretothereideas.blogspot.com/ *

3 5

Re: [Users] iscsi mpio
by Vered Volansky 13 Dec '12

13 Dec '12

You previously mentioned you're using package 2.5.5-0.fc17. It looks like you have a typo, so please resend the exact package of ovirt-node you're using. Also - Where did you get the package from? We'd like to try and reproduce here. Did you make any changes to mount so that /var is now Read Only? Please send us the output for the mount command on your system. Please remember to reply-to-all next time(s)... Thanks, Vered ----- Original Message ----- > From: "Jonathan Horne" <jhorne(a)skopos.us> > To: "Vered Volansky" <vered(a)redhat.com> > Sent: Monday, December 10, 2012 4:24:05 PM > Subject: Re: [Users] iscsi mpio > > Im using the ovirt node which is a prebuilt appliance-like version of > ovirt. > > It is highly customized, and is not open to alteration. (to do so > would be > quite a bit of work). > > JONATHAN HORNE | Systems Administrator | Skopos Web > <http://www.skopos.us/> > e: jhorne(a)skopos.us t: (972) 520-5042 f: (214) 520-5079 > > > > > > > On 12/10/12 6:46 AM, "Vered Volansky" <vered(a)redhat.com> wrote: > > >Hi Jonathan, > > > >I'm trying to understand the context for your problem. > > > >As I understand it, your problem stems from the fact that you're > >working > >on a Read Only fs, long before the multipath issue. > >So you have root permissions on an RO fs? > >How come? Why is it RO to begin with? > >Are you working on RHEVM? > >Which OS, version? > > > >Maybe we can be of more help if we better understand the context. > > > >Thanks, > >Vered > > > > > >----- Original Message ----- > >> From: "Jonathan Horne" <jhorne(a)skopos.us> > >> To: users(a)ovirt.org > >> Sent: Friday, December 7, 2012 7:09:08 PM > >> Subject: Re: [Users] iscsi mpio > >> > >> Im using a Equallogic iscsi SAN, and it has a special multi path > >> driver > >> because it uses a virtual IP for the initiator to log into, and > >> the > >> actual > >> traffic ip addresses are not exposed to the initiator. > >> > >> I tried to install the rpm but as far as i can get is: > >> > >> [root@vmnode02 x86_64]# rpm -Uvh > >> equallogic-host-tools-1.2.0-2.el6.x86_64.rpm --nodeps > >> warning: equallogic-host-tools-1.2.0-2.el6.x86_64.rpm: Header V4 > >> DSA/SHA1 > >> Signature, key ID 84fd3ef3: NOKEY > >> error: can't create transaction lock on /var/lib/rpm/.rpm.lock > >> (Read-only > >> file system) > >> > >> Is there a way to unlock the file system so i can try to install > >> and > >> configure this driver? > >> > >> > >> This is the current output of multipath -ll on my node: > >> > >> [root@vmnode02 x86_64]# multipath -ll > >> 36019cb3131d6f276d80a45bb6501f0c9 dm-10 > >> size=500G features='0' hwhandler='0' wp=rw > >> 36001e4f03dd42300183eaac404afd5ce dm-0 DELL,PERC 6/i > >> size=279G features='0' hwhandler='0' wp=rw > >> `-+- policy='round-robin 0' prio=1 status=active > >> `- 2:2:0:0 sda 8:0 active ready running > >> > >> > >> > >> The EQ san does show only 1 single tcp connection into the LUN, so > >> i > >> know > >> its not multipathing at this time. This will be a huge downer if > >> i > >> have > >> to go to production without multi path support. > >> > >> Is there anything i can do here? > >> > >> > >> > >> > >> > >> On 12/7/12 8:42 AM, "René Koch (ovido)" <r.koch(a)ovido.at> wrote: > >> > >> >Hi, > >> > > >> >I can give you some information on multipathing on RHEV-H, as I > >> >don't > >> >have ovirt-node installed at the moment. > >> > > >> >Multipath packages are installed on the hypervisor, but vdsm > >> >overwrites > >> >multipath.conf. > >> > > >> >To prevent this you have to set the following tags: > >> ># RHEV REVISION 0.7 > >> ># RHEV PRIVATE > >> > > >> >Search for MPATH_CONF_TAG in multipath.py file to get correct > >> >RHEV > >> >REVISION number. > >> > > >> >After changing multipath.conf to fit your needs make it > >> >persistent > >> >for > >> >reboots: > >> ># persist /etc/multipath.conf > >> > > >> > > >> >You can check multipath status with: > >> > > >> ># multipath -ll > >> >mpathb (2222b00015521f5d4) dm-0 Intel,Multi-Flex > >> >size=96G features='0' hwhandler='0' wp=rw > >> >|-+- policy='round-robin 0' prio=50 status=active > >> >| `- 0:0:0:1 sdb 8:16 active ready running > >> >mpatha (222140001553601d1) dm-1 Intel,Multi-Flex > >> >size=20G features='0' hwhandler='0' wp=rw > >> >|-+- policy='round-robin 0' prio=50 status=active > >> >| `- 0:0:0:0 sda 8:0 active ready running > >> > > >> >I hope this helps. > >> >Don't really know if the tags are the same in oVirt, as I don't > >> >have > >> >a > >> >working oVirt setup at the moment. > >> > > >> > > >> >-- > >> >Best Regards, > >> > > >> >DI (FH) René Koch > >> >Senior Solution Architect > >> > > >> >============================================ > >> >ovido gmbh - "Das Linux Systemhaus" > >> >Brünner Straße 163, A-1210 Wien > >> > > >> >Phone: +43 720 / 530 670 > >> >Mobile: +43 660 / 512 21 31 > >> >E-Mail: r.koch(a)ovido.at > >> >============================================ > >> > > >> > > >> >On Fri, 2012-12-07 at 13:55 +0000, Jonathan Horne wrote: > >> >> > >> >> > >> >> From: Jonathan Horne <jhorne(a)skopos.us> > >> >> Date: Thursday, December 6, 2012 1:04 PM > >> >> To: users <users(a)ovirt.org> > >> >> Subject: [Users] iscsi mpio > >> >> > >> >> > >> >> > >> >> Hello, > >> >> > >> >> > >> >> I just rebooted my iscsi SAN and the ovirt node 2.5.5fc17 did > >> >> not > >> >> enjoy that one bit. Does ovirt node support multi path i/o? > >> >> Any > >> >> information about this would be greatly appreciated. > >> >> > >> >> > >> >> Thanks, > >> >> jonathan > >> >> > >> >> > >> >> > >> >> > >> >> > >> >> > >> >> I attempted to install the multi path driver on node > >> >> 2.5.5-0.fc17, > >> >> but > >> >> the file system is read only and i can't make changes. > >> >> > >> >> > >> >> I really need to find out about multipathing, because yesterday > >> >> i > >> >> upgraded the firmware on my iscsi SAN yesterday, and one of my > >> >> nodes > >> >> freaked out and rebooted (oddly, the other 2 didn't). In > >> >> understand > >> >> there may already be multi path configured within the node, but > >> >> how do > >> >> i verify it with my set up? > >> >> > >> >> > >> >> Thanks, > >> >> jonathan > >> >> > >> >> > >> >> > >>______________________________________________________________________ > >> >> This is a PRIVATE message. If you are not the intended > >> >> recipient, > >> >> please delete without copying and kindly advise us by e-mail of > >> >> the > >> >> mistake in delivery. NOTE: Regardless of content, this e-mail > >> >> shall > >> >> not operate to bind SKOPOS to any order or other contract > >> >> unless > >> >> pursuant to explicit written agreement or government initiative > >> >> expressly permitting the use of e-mail for such purpose. > >> >> _______________________________________________ > >> >> Users mailing list > >> >> Users(a)ovirt.org > >> >> http://lists.ovirt.org/mailman/listinfo/users > >> > > >> >_______________________________________________ > >> >Users mailing list > >> >Users(a)ovirt.org > >> >http://lists.ovirt.org/mailman/listinfo/users > >> > >> > >> ________________________________ > >> This is a PRIVATE message. If you are not the intended recipient, > >> please delete without copying and kindly advise us by e-mail of > >> the > >> mistake in delivery. NOTE: Regardless of content, this e-mail > >> shall > >> not operate to bind SKOPOS to any order or other contract unless > >> pursuant to explicit written agreement or government initiative > >> expressly permitting the use of e-mail for such purpose. > >> _______________________________________________ > >> Users mailing list > >> Users(a)ovirt.org > >> http://lists.ovirt.org/mailman/listinfo/users > >> > > > ________________________________ > This is a PRIVATE message. If you are not the intended recipient, > please delete without copying and kindly advise us by e-mail of the > mistake in delivery. NOTE: Regardless of content, this e-mail shall > not operate to bind SKOPOS to any order or other contract unless > pursuant to explicit written agreement or government initiative > expressly permitting the use of e-mail for such purpose. >

3 2

[Users] help with iSCSI storage domain needed - Ovirt -3.1
by Aleksandr Arbitman 12 Dec '12

12 Dec '12

---910415156-1050739562-1355276445=:87072 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable Hi, everybody ! I have installed=A0 ovirt 3.1 engine and two nodes. I have setup iscsi stor= age on another box and tested it with windows system - I was able to add it= to win7 initiator, meaning the storage configured properly. But I can't ad= d iscsi storage in ovirt-engine system. When I use "DIscover Targets" optio= n and type IP address of my iscsi system - nothing is happening. All my systems - engine, nodes and iscsi server - are on the same network. = Is it a bug? Is there any way to fix it ? Did anyone have the same issue ? = Please, help. Thanks in advance for any tips. Alex ---910415156-1050739562-1355276445=:87072 Content-Type: text/html; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable <table cellspacing=3D"0" cellpadding=3D"0" border=3D"0" ><tr><td valign=3D"= top" style=3D"font: inherit;">Hi, everybody !<br>I have installed  ovi= rt 3.1 engine and two nodes. I have setup iscsi storage on another box and = tested it with windows system - I was able to add it to win7 initiator, mea= ning the storage configured properly. But I can't add iscsi storage in ovir= t-engine system. When I use "DIscover Targets" option and type IP address o= f my iscsi system - nothing is happening.<br>All my systems - engine, nodes= and iscsi server - are on the same network. Is it a bug? Is there any way = to fix it ? Did anyone have the same issue ? Please, help. Thanks in advanc= e for any tips.<br><br><br>Alex<br></td></tr></table> ---910415156-1050739562-1355276445=:87072--

2 4

Re: [Users] Rest-Api to get the VM ip-address in oVirt /RHEV-M 3.0
by Michael Pasternak 12 Dec '12

12 Dec '12

what sdk version you're using? On 12/12/2012 03:15 PM, Romil Gupta wrote: > Thanks, > I tried this but It doesn't work for me : > > VM_NAME='instance-0000019b' > ips=api.vms.get(VM_NAME).get_guest_info().get_ips() > print ips > > > Output : None > > On Wed, Dec 12, 2012 at 6:38 PM, Michael Pasternak <mpastern(a)redhat.com <mailto:mpastern@redhat.com>> wrote: > > vm.get_guest_info().get_ips() > > > > > -- > I don't wish to be everything to everyone, but I would like to be something to someone. -- Michael Pasternak RedHat, ENG-Virtualization R&D

1 0

Re: [Users] Rest-Api to get the VM ip-address in oVirt /RHEV-M 3.0
by Michael Pasternak 12 Dec '12

12 Dec '12

On 12/12/2012 02:51 PM, Romil Gupta wrote: > ya i can see it > > <guest_info> > <ip address="10.1.0.66"/> > </guest_info> great, next step: can you do 'vm.get_guest_info().get_ips()' in sdk? (make sure you're looking at right vm) > > > On Wed, Dec 12, 2012 at 6:13 PM, Michael Pasternak <mpastern(a)redhat.com <mailto:mpastern@redhat.com>> wrote: > > On 12/12/2012 02:30 PM, Romil Gupta wrote: > > sorry I didn't get you ! > > ya ... i can fetch VM via api but i can't get its ip address using the api ! > > Romil, > > when i say api, i mean ovirt-restapi, i understand that you using sdk, > but to find the problem i need you to fetch vm/s via ovirt-restapi directly > > do from curl or any other http client: GET http(s)://sever:port/api/vms > and let me know if you can see ips in returned xml > > > > > > > > > > > On Wed, Dec 12, 2012 at 5:53 PM, Michael Pasternak <mpastern(a)redhat.com <mailto:mpastern@redhat.com> <mailto:mpastern@redhat.com <mailto:mpastern@redhat.com>>> wrote: > > > > On 12/12/2012 01:52 PM, Romil Gupta wrote: > > > Hi Michael, > > > > > > I have 'rhev-agent-2.3.16-3.el6.x86_64 ' on every VM's and I tired api.vms.get(VM_NAME).guest_info.ips but it return NONE ! > > > I can see on UI that all VM's have some IP Address . > > > can you please check once ? > > > > can you see it when fetching vm via api directly? > > > > > > > > Thanks > > > Romil > > > > > > > > > On Wed, Dec 12, 2012 at 5:11 PM, Michael Pasternak <mpastern(a)redhat.com <mailto:mpastern@redhat.com> <mailto:mpastern@redhat.com <mailto:mpastern@redhat.com>> > <mailto:mpastern@redhat.com <mailto:mpastern@redhat.com> <mailto:mpastern@redhat.com <mailto:mpastern@redhat.com>>>> wrote: > > > > > > On 12/12/2012 01:31 PM, Romil Gupta wrote: > > > > > > > > Hi, > > > > > > > > I am looking for a REST-API to get the IP-ADDRESS of a VM ? > > > > At the creation time we attach a nic's to a VM , but I didn't find any API to get the IP address. > > > > > > > > I want to pass the VM_NAME as a parameter and get the IP-ADDRESS of a particular VM ! > > > > is it possible ?? > > > > > > yes it is, ips located under <guest_info> in vm, but note that you > > > have to have guest agent installed. > > > > > > > > > > > Thanks for all your continuous help till now. > > > > > > > > Regards, > > > > Romil > > > > > > > > > > > > > -- > > > > > > Michael Pasternak > > > RedHat, ENG-Virtualization R&D > > > > > > > > > > > > > > > -- > > > I don't wish to be everything to everyone, but I would like to be something to someone. > > > > > > -- > > > > Michael Pasternak > > RedHat, ENG-Virtualization R&D > > > > > > > > > > -- > > I don't wish to be everything to everyone, but I would like to be something to someone. > > > -- > > Michael Pasternak > RedHat, ENG-Virtualization R&D > > > > > -- > I don't wish to be everything to everyone, but I would like to be something to someone. -- Michael Pasternak RedHat, ENG-Virtualization R&D

1 0

Re: [Users] Rest-Api to get the VM ip-address in oVirt /RHEV-M 3.0
by Michael Pasternak 12 Dec '12

12 Dec '12

On 12/12/2012 02:30 PM, Romil Gupta wrote: > sorry I didn't get you ! > ya ... i can fetch VM via api but i can't get its ip address using the api ! Romil, when i say api, i mean ovirt-restapi, i understand that you using sdk, but to find the problem i need you to fetch vm/s via ovirt-restapi directly do from curl or any other http client: GET http(s)://sever:port/api/vms and let me know if you can see ips in returned xml > > > > > On Wed, Dec 12, 2012 at 5:53 PM, Michael Pasternak <mpastern(a)redhat.com <mailto:mpastern@redhat.com>> wrote: > > On 12/12/2012 01:52 PM, Romil Gupta wrote: > > Hi Michael, > > > > I have 'rhev-agent-2.3.16-3.el6.x86_64 ' on every VM's and I tired api.vms.get(VM_NAME).guest_info.ips but it return NONE ! > > I can see on UI that all VM's have some IP Address . > > can you please check once ? > > can you see it when fetching vm via api directly? > > > > > Thanks > > Romil > > > > > > On Wed, Dec 12, 2012 at 5:11 PM, Michael Pasternak <mpastern(a)redhat.com <mailto:mpastern@redhat.com> <mailto:mpastern@redhat.com <mailto:mpastern@redhat.com>>> wrote: > > > > On 12/12/2012 01:31 PM, Romil Gupta wrote: > > > > > > Hi, > > > > > > I am looking for a REST-API to get the IP-ADDRESS of a VM ? > > > At the creation time we attach a nic's to a VM , but I didn't find any API to get the IP address. > > > > > > I want to pass the VM_NAME as a parameter and get the IP-ADDRESS of a particular VM ! > > > is it possible ?? > > > > yes it is, ips located under <guest_info> in vm, but note that you > > have to have guest agent installed. > > > > > > > > Thanks for all your continuous help till now. > > > > > > Regards, > > > Romil > > > > > > > > > -- > > > > Michael Pasternak > > RedHat, ENG-Virtualization R&D > > > > > > > > > > -- > > I don't wish to be everything to everyone, but I would like to be something to someone. > > > -- > > Michael Pasternak > RedHat, ENG-Virtualization R&D > > > > > -- > I don't wish to be everything to everyone, but I would like to be something to someone. -- Michael Pasternak RedHat, ENG-Virtualization R&D

1 0