- Users - oVirt List Archives

[Users] Package from CentOs 6.3
by Marcelo Barbosa 20 Dec '12

20 Dec '12

Hi guys, I woud like to know where can I download nome-pacote rpm for Centos. Does anybody can help me? Thanks Marcelo Barbosa +55 51 8414 6309 *mr.marcelo.barbosa(a)gmail.com*

1 1

[Users] v2v vmware conversion
by Alex Leonhardt 20 Dec '12

20 Dec '12

Hi, I've seen several posts out there on how to convirt hosts from VMware -> Ovirt/KVM - Am I right to assume that just like the command for RHEV, the equivalent for Ovirt would be : virt-v2v -ic esx://$IP$/?no_verify=1 -o rhev -osd $HV$:/vol/exportdomain --network ovirtmgmt $VMNAME$ Also, I read a post that refers to a ovirt profile for v2v - I've never had to convert any VMs from VMWare so was wondering if that is just a custom config or whether there is a general v2v profile that can be used to convert to ovirt ? Alex

2 1

[Users] Report size of thin provisioned disk
by Jeff Bailey 20 Dec '12

20 Dec '12

With 3.2 alpha, on the disks subtab of the virtual machines tab I'm seeing the correct "virtual size" for the disk but the "actual size" remains 1GB even though the drive has grown to 11GB (according to lvs output). It doesn't seem to be causing any problems. The auto-growth (from my perspective) is working much smoother than it did a release ago :) I just wondered if anyone else had noticed this. Thanks, Jeff

2 1

[Users] AIO f18 nightly local storage active only in permissive mode
by Gianluca Cecchi 20 Dec '12

20 Dec '12

Hello, Fedora 18 with all-in-one config and nightly build repo at this level: ovirt-engine-3.2.0-1.20121217.git1e01c00.fc18.noarch When I try to activate local domain I view it remains in "contending" and then fails. I try 2-3 times. [g.cecchi@f18aio ~]$ getenforce Enforcing As soon as I set setenforce 0 [g.cecchi@f18aio ~]$ getenforce Permissive And I try to activate again, it works and my local_host results correctly up. Is this something already fixed in next nightly or should I send my logs? Is it supposed to be a supported config with SELinux in Enforcing or not (I'm referring to the problem of tuned too..)? Thanks Gianluca

1 0

Re: [Users] rhevm-cli - add nfs data storage
by Michael Pasternak 20 Dec '12

20 Dec '12

Hi Meni, When you pass --datacenter-identifier, you attaching existent SD to the data-center, note, you can see what parameters use for any command/action just running 'help' command: [oVirt shell (connected)]# help add storagedomain USAGE add <type> [base identifiers] [attribute options] DESCRIPTION Creates a new object or adds existent with type storagedomain. See 'help add' for generic help on creating objects. ATTRIBUTE OPTIONS The following options are available for objects with type storagedomain: Overload 1: * --host-id|name: string * --type: string * --storage-type: string * --format: boolean * --storage-address: string * --storage-logical_unit: collection { logical_unit.address: string logical_unit.port: int logical_unit.target: string logical_unit.username: string logical_unit.password: string logical_unit.serial: string logical_unit.vendor_id: string logical_unit.product_id: string logical_unit.lun_mapping: int logical_unit.portal: string logical_unit.paths: int logical_unit.id: string } * [--name: string] * [--storage-override_luns: boolean] Overload 2: * --host-id|name: string * --type: string * --storage-type: string * --format: boolean * --storage-address: string * --storage-path: string * [--name: string] Overload 3: * --host-id|name: string * --type: string * --storage-type: string * --format: boolean * --storage-path: string * [--name: string] Overload 4: * --host-id|name: string * --type: string * --storage-type: string * --format: boolean * --storage-path: string * --storage-vfs_type: string * [--name: string] * [--storage-address: string] * [--storage-mount_options: string] * [--expect: 201-created] * [--correlation_id: anystring] .... On 12/19/2012 11:56 AM, Meni Yakove wrote: > Hi, > > I'm trying to add new NFS data storage to my setup using CLI and it fail: > > [RHEVM shell (connected)]# add storagedomain --name CLI_DataStorage --host-name orchid-vds1 --type data --storage-type nfs --format v3 --storage-address > orion.qa.lab.tlv.redhat.com --storage-path /export/meni/dc31-cli --datacenter-identifier DC31-CLI > > error: > status: 400 > reason: Bad Request > detail: Entity not found: Storage: name=CLI_DataStorage > > On the user guide: > > *Create NFS data storage* > > An NFS data storage domain is an exported NFS share attached to a data center. It provides storage for virtual machines. Add the NFS share as a data storage domain with > the |add storagedomain| command. > > [RHEVM shell (connected)]# add storagedomain --name DataStorage --host-name MyHost --type data --storage-type nfs --format v1 --storage-address! > 192.168.0 > .10 --storage-path /exports/data --datacenter-indentifier Default > > > And: > > > Example 5.13. Creating a new storage domain > > [RHEVM shell (connected)]# add storagedomain --name DataStorage --datacenter-name Default -type data > > > I have tried both but still the same error. what I'm doing wrong? > > Thanks > Meni > -- Michael Pasternak RedHat, ENG-Virtualization R&D

1 0

[Users] ovirt 3.1 vnc passwordless setup
by Alexandru Vladulescu 20 Dec '12

20 Dec '12

Hi guys, I am running Ovirt 3.1 (fresh install -- no upgrade) on some Centos 6.3 servers; and I did a small setup regarding 2 hypervisors, 1 node controller and 1 NAS server providing NFS export, storage & ISO domains for the appliances. All this solution has one server more that's acting as a firewall and traffic policy shaping in front of the network setup. The problem that I am facing right now, is that I am trying to setup Ovirt on VNC remote connection in the manner that does not require password login with 120 seconds expiration timeout. Somehow I would like to map VNC ports on the 2 hypervisor nodes to bond with a vnc reflector installed on the node controller, which also acts as a VPN server on the setup for out-band connections. Therefore, users connecting over VPN could get access to the VNC of the VMs without entering the web portal and requiring an active VNC password with 120 seconds expiration time. I tried digging through the libvirtd.conf and qemu.conf configuration files, found some VNC parameters but none seemed to do the job for my purpose. I must mention that I have been looking for a similar setup on the Ovirt documentation page as well as googlin' it. You help will be much appreciated. My regards, Alex Vladulescu

2 1

[Users] Maintenance outage :: lists.ovirt.org :: 2012-12-20 01:00 UTC
by Karsten 'quaid' Wade 20 Dec '12

20 Dec '12

This is an OpenPGP/MIME signed message (RFC 2440 and 3156) --------------enig499090C9A4399B31F318A0E8 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable There is an outage of lists.ovirt.org for ten minutes to increase disk space on the host. The outage will occur at 2012-12-20 01:00 UTC. To view in your local time= : date -d '2012-12-20 01:00 UTC' =3D=3D Details =3D=3D We are constantly nearly out of disk space on linode01.ovirt.org, which hosts the Mailman and yum/download repositories. As a stop-gap help, I've got 5 GB more of space I can put in to the host = VM. We plan to migrate this host to one of the Alter Way instances, probably a VM running on one of the two physical machines. If possible, we'll make this move soonest for both the Mailman and download repositories. =3D=3D Affected services =3D=3D * lists.ovirt.org * resources.ovirt.org * httpd redirects of old URLs * IRC bot =3D=3D=3D Not-affected services =3D=3D * www.ovirt.org * jenkins.ovirt.org * gerrit.ovirt.org * git.ovirt.org =3D=3D Future plans =3D=3D Move services to a host with more space and capability, as part of the Infra team general hosting plan. --=20 Karsten 'quaid' Wade, Sr. Analyst - Community Growth http://TheOpenSourceWay.org .^\ http://community.redhat.com @quaid (identi.ca/twitter/IRC) \v' gpg: AD0E0C41 --------------enig499090C9A4399B31F318A0E8 Content-Type: application/pgp-signature; name="signature.asc" Content-Description: OpenPGP digital signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) Comment: Using GnuPG with undefined - http://www.enigmail.net/ iD8DBQFQ0kjP2ZIOBq0ODEERAkcqAKDNPGtRQMuvXdFTAg2onhI0t/uY1ACgtyB9 vUGV+2yJZuWyiK1ppiRusB8= =jSAP -----END PGP SIGNATURE----- --------------enig499090C9A4399B31F318A0E8--

1 0

[Users] ovirt-shell as ForceCommand for ssh logins
by Jiri Belka 19 Dec '12

19 Dec '12

Hi, ForceCommand for ssh session can force command for logging user. Problem is ovirt-shell enables shell commands, that's not nice if we would just want to give sysadmins some "restricted" cli for managing oVirt environment. 1. Could be implemented an option to disable these shell "escapes"? Like '-S', so it would be 'comment="/usr/bin/ovirt-shell -S"' in user's authorized_keys. 2. Could be implemented an ovirt-shell command like 'set' to set configuration from ovirt-shell and save it(yes, user in ovirt-shell should not touch filesystem directly)? Example: > set username = "foo@domain" > save -a # save all runtime settings 3. Aliases like in lftp client? > alias lsvmmyvm list vms --query "name=myvm*" > save alias lsvmmyvm jbelka

2 3

[Users] ovirt 3.2 Alpha - invalid packages
by Winfried de Heiden 19 Dec '12

19 Dec '12

5 6

[Users] attempted live snapshot, machine paused, wouldn't restart
by Erik Jacobs 19 Dec '12

19 Dec '12

I attempted to take a snapshot of a machine while it was running. I noticed that the machine was paused, and then I attempted to resume it. The machine looked like it was going to launch, but the events tab simply indicated that execution of launching the vm failed. Here's the engine.log at the time: 2012-12-18 22:53:55,838 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.IsValidVDSCommand] (ajp--0.0.0.0-8009-5) START, IsValidVDSCommand(storagePoolId = 2ccd03b1-fd0e-4578-88ce-e5065a9742d7, ignoreFailoverLimit = false, compatabilityVersion = null), log id: 19399f32 2012-12-18 22:53:55,848 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.IsValidVDSCommand] (ajp--0.0.0.0-8009-5) FINISH, IsValidVDSCommand, return: true, log id: 19399f32 2012-12-18 22:53:55,894 INFO [org.ovirt.engine.core.vdsbroker.IsVmDuringInitiatingVDSCommand] (ajp--0.0.0.0-8009-5) START, IsVmDuringInitiatingVDSCommand(vmId = 35d58779-ee24-4926-8612-e053ff48881b), log id: 76d4a2b2 2012-12-18 22:53:55,895 INFO [org.ovirt.engine.core.vdsbroker.IsVmDuringInitiatingVDSCommand] (ajp--0.0.0.0-8009-5) FINISH, IsVmDuringInitiatingVDSCommand, return: false, log id: 76d4a2b2 2012-12-18 22:53:55,935 INFO [org.ovirt.engine.core.bll.RunVmCommand] (pool-3-thread-49) [17252a1c] Lock Acquired to object EngineLock [exclusiveLocks= key: 35d58779-ee24-4926-8612-e053ff48881b value: VM , sharedLocks= ] 2012-12-18 22:53:55,952 INFO [org.ovirt.engine.core.bll.RunVmCommand] (pool-3-thread-49) [17252a1c] Running command: RunVmCommand internal: false. Entities affected : ID: 35d58779-ee24-4926-8612-e053ff48881b Type: VM 2012-12-18 22:53:55,966 INFO [org.ovirt.engine.core.vdsbroker.ResumeVDSCommand] (pool-3-thread-49) [17252a1c] START, ResumeVDSCommand(vdsId = 0a7046ea-216d-11e2-8fe8-001372eb596b, vmId=35d58779-ee24-4926-8612-e053ff48881b), log id: 607d6dc2 2012-12-18 22:53:55,976 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.ResumeBrokerVDSCommand] (pool-3-thread-49) [17252a1c] START, ResumeBrokerVDSCommand(vdsId = 0a7046ea-216d-11e2-8fe8-001372eb596b, vmId=35d58779-ee24-4926-8612-e053ff48881b), log id: 66b1872c 2012-12-18 22:53:56,292 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.ResumeBrokerVDSCommand] (pool-3-thread-49) [17252a1c] FINISH, ResumeBrokerVDSCommand, log id: 66b1872c 2012-12-18 22:53:56,298 INFO [org.ovirt.engine.core.vdsbroker.ResumeVDSCommand] (pool-3-thread-49) [17252a1c] FINISH, ResumeVDSCommand, return: PoweringUp, log id: 607d6dc2 2012-12-18 22:53:56,302 INFO [org.ovirt.engine.core.bll.RunVmCommand] (pool-3-thread-49) [17252a1c] Lock freed to object EngineLock [exclusiveLocks= key: 35d58779-ee24-4926-8612-e053ff48881b value: VM , sharedLocks= ] I'm not sure if I was missing something, or if I needed to wait for something to complete, or what. I ended up just stopping the machine and then starting it from cold. Any thoughts here? I'm happy to attempt this again and to see if it breaks the same way and to capture more data. Cheers, -- Erik Jacobs ATLElite / www.atlelite.com DGTrials / www.DGTrials.com FestiveGarage / www.FestiveGarage.com Riding Resource / www.RidingResource.com www.erikjacobs.com (C) 646-284-3482 (F) 404-585-4409

3 3