- Users - oVirt List Archives

Ovirt 4 2 NIC's
by Facundo Badaracco 20 Nov '20

20 Nov '20

Hi everyone! Hope someone can help me with this.. I have 3 servers with centos 8 and ovirt 4 installed. Each server has 2 nic. Server A = HE (HA) Nic1= 192.169.2.24 Nic2=no ip Server B = HE (HA) Nic1= 192.169.2.25 Nic2=no ip Server C = simply host. Nic1= 192.169.2.26 Nic2=no ip How can i configure the second NIC in each server in order to use it for clients connect to the vms?. I want one nic for management, the other for connections.

2 1

Can't use ovirt web interface (500 error)
by lorenzobarbati02＠gmail.com 20 Nov '20

20 Nov '20

Hi, After updating to the latest version of ovirt (standalone installed with engine-setup) I am no longer able to use the web ui. After I log in, in fact, I get a modal error entitled "operation canceled" and with content "a request to the server failed, error 500" Looking at the requests it actually receives an error 500 when it goes to make a request to "/ovirt-engine/webadmin/GenericApiGWTService" which replies "The call failed on the server; see server log for details" These are the last lines of the engine.log: https://pastebin.com/uFgZASuW Is anyone experiencing the same problem or know how to fix it?

2 1

How do you manage OVN?
by Alex McWhirter 20 Nov '20

20 Nov '20

I'm not sure if I' missing something, but it seems there is no way built in to oVirt to manage OVN outside of network / subnet creation. In particular routing both between networks and to external networks. Of course you have the OVN utilities, but it seems that the provider API is the preffered method of interaction? As far as i can tell, the only utility that can use this API as intended is ManageIQ, which is a bit a behemoth if you only need the OVN portion of things. So is that it then? Interface with the API directly or use ManageIQ? Just curious what others are doing in regards to OVN.

2 1

Need documentation on how to use grafana with ovirt
by wodel youchi 20 Nov '20

20 Nov '20

Hi, Is there any documentation explaining how to use grafana portal to extract metrics data from ovirt ? Regards.

2 1

Re: ovirt 4.3 - locked image vm - unable to remove a failed deploy of a guest dom
by 3c Monitor 20 Nov '20

20 Nov '20

Hi, anyone with an idea on what else I can do? Thanks a lot.

1 0

EPYC CPU not being detected correctly on cluster
by Vinícius Ferrão 19 Nov '20

19 Nov '20

Hi I've an strange issue with two hosts (not using the hypervisor image) with EPYC CPUs, on the engine I got this message: The host CPU does not match the Cluster CPU Type and is running in a degraded mode. It is missing the following CPU flags: model_EPYC. Please update the host CPU microcode or change the Cluster CPU Type. But it is an EPYC CPU, the firmware is updated to the latest versions, but for some reason oVirt does not like it. Here's the relevant output from VDSM: "cpuCores": "128", "cpuFlags": "ibs,vme,abm,sep,ssse3,perfctr_core,sse4_2,skip-l1dfl-vmentry,cx16,pae,misalignsse,avx2,smap,movbe,vgif,rdctl-no,extapic,clflushopt,de,sse4_1,xsaveerptr,perfctr_llc,fma,mca,sse,rdtscp,monitor,umip,mwaitx,cr8_legacy,mtrr,stibp,bmi2,pclmulqdq,amd-ssbd,lbrv,pdpe1gb,constant_tsc,vmmcall,f16c,ibrs,fsgsbase,invtsc,nopl,lm,3dnowprefetch,smca,ht,tsc_adjust,popcnt,cpb,bmi1,mmx,arat,aperfmperf,bpext,cqm_occup_llc,virt-ssbd,tce,pse,xsave,xgetbv1,topoext,sha_ni,amd_ppin,rdrand,cpuid,tsc_scale,extd_apicid,cqm,rep_good,tsc,sse4a,flushbyasid,pschange-mc-no,mds-no,ibpb,smep,clflush,tsc-deadline,fxsr,pat,avx,pfthreshold,v_vmsave_vmload,osvw,xsavec,cdp_l3,clzero,svm_lock,nonstop_tsc,adx,hw_pstate,spec-ctrl,arch-capabilities,xsaveopt,skinit,rdt_a,svm,rdpid,lahf_lm,fpu,rdseed,fxsr_opt,sse2,nrip_save,vmcb_clean,sme,cat_l3,cqm_mbm_local,irperf,overflow_recov,avic,mce,mmxext,msr,cx8,hypervisor,wdt,mba,nx,decodeassists,cmp_legacy,x2apic,perfctr_nb,succor,pni,xsaves,clwb,cqm_llc,syscall,apic,pge,npt,pse36,cmov,ssbd,pausefilter,sev,aes,wbnoinvd,cqm_mbm_total,spec_ctrl,model_qemu32,model_Opteron_G3,model_Nehalem-IBRS,model_qemu64,model_Conroe,model_kvm64,model_Penryn,model_SandyBridge,model_pentium,model_pentium2,model_kvm32,model_Nehalem,model_Opteron_G2,model_pentium3,model_Opteron_G1,model_SandyBridge-IBRS,model_486,model_Westmere-IBRS,model_Westmere", "cpuModel": "AMD EPYC 7H12 64-Core Processor", "cpuSockets": "2", "cpuSpeed": "3293.405", "cpuThreads": "256", Any ideia on why ou what to do to fix it? Thanks,

1 0

[ANN] oVirt 4.4.4 Second Release Candidate is now available for testing
by Lev Veyde 19 Nov '20

19 Nov '20

oVirt 4.4.4 Second Release Candidate is now available for testing The oVirt Project is pleased to announce the availability of oVirt 4.4.4 Second Release Candidate for testing, as of November 19th, 2020. This update is the fourth in a series of stabilization updates to the 4.4 series. How to prevent hosts entering emergency mode after upgrade from oVirt 4.4.1 Note: Upgrading from 4.4.2 GA or later should not require re-doing these steps, if already performed while upgrading from 4.4.1 to 4.4.2 GA. These are only required to be done once. Due to Bug 1837864 <https://bugzilla.redhat.com/show_bug.cgi?id=1837864> - Host enter emergency mode after upgrading to latest build If you have your root file system on a multipath device on your hosts you should be aware that after upgrading from 4.4.1 to 4.4.4 you may get your host entering emergency mode. In order to prevent this be sure to upgrade oVirt Engine first, then on your hosts: 1. Remove the current lvm filter while still on 4.4.1, or in emergency mode (if rebooted). 2. Reboot. 3. Upgrade to 4.4.4 (redeploy in case of already being on 4.4.4). 4. Run vdsm-tool config-lvm-filter to confirm there is a new filter in place. 5. Only if not using oVirt Node: - run "dracut --force --add multipath” to rebuild initramfs with the correct filter configuration 6. Reboot. Documentation - If you want to try oVirt as quickly as possible, follow the instructions on the Download <https://ovirt.org/download/> page. - For complete installation, administration, and usage instructions, see the oVirt Documentation <https://ovirt.org/documentation/>. - For upgrading from a previous version, see the oVirt Upgrade Guide <https://ovirt.org/documentation/upgrade_guide/>. - For a general overview of oVirt, see About oVirt <https://ovirt.org/community/about.html>. Important notes before you try it Please note this is a pre-release build. The oVirt Project makes no guarantees as to its suitability or usefulness. This pre-release must not be used in production. Installation instructions For installation instructions and additional information please refer to: https://ovirt.org/documentation/ This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 8.2 or newer * CentOS Linux (or similar) 8.2 or newer This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 8.2 or newer * CentOS Linux (or similar) 8.2 or newer * oVirt Node 4.4 based on CentOS Linux 8.2 (available for x86_64 only) See the release notes [1] for installation instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is already available for CentOS Linux 8 - oVirt Node NG is already available for CentOS Linux 8 Additional Resources: * Read more about the oVirt 4.4.4 release highlights: http://www.ovirt.org/release/4.4.4/ * Get more oVirt project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.4.4/ [2] http://resources.ovirt.org/pub/ovirt-4.4-pre/iso/ -- Lev Veyde Senior Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

OVIRT and KUBEVIRT
by Andre Meyer Pflug 19 Nov '20

19 Nov '20

Is there someone who has done an NON PERSISTANT VDI over oVirt using kubevirt (on OKD) as the infraestructure for vm's? We plan to do a 1.000.000 concurrent users deployment... Any help is welcome! Kind regards, Andre Meyer Pflug DDESK LLC

3 2

Self Hosted Engine a single Bare Metal Server
by LS CHENG 19 Nov '20

19 Nov '20

Hi We are planning to set up a single ovirt node for testing. It is a single Bare Metal Server. I wonder if there is any problem setting up a Self Hosted Engine in this Bare Metal (there is no HA but we don't need it in this case)? I know it is probably not the best practice but it is for training and testing purposes. Thank you

1 0

Fix corrupt self-hosted engine
by Alex K 19 Nov '20

19 Nov '20

Hi all, I have a corrupt self-hosted engine (with several file system errors, postgres not able to start) and thus it does not give access to the web UI. This happened following an unlucky split brain resolution (I am running 2 nodes). The two hosts are running VMs also which I would like to keep running as they are needed. When trying to boot into rescue mode (using systemd.unit=emergency.target boot parameter) I get a cursor and nothing else. I have backups of engine files with scope all (using the engine-backup tool). What is the best approach to try and fix the engine or redeploy. Thanks for any help. Alex

2 2