- Users - oVirt List Archives

[ANN] oVirt 4.3.1 is now generally available
by Sandro Bonazzola 28 Feb '19

28 Feb '19

The oVirt Project is pleased to announce the general availability of oVirt 4.3.1, as of February 26th, 2019. This update is the first in a series of stabilization updates to the 4.3 series. This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 7.6 or later * CentOS Linux (or similar) 7.6 or later This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 7.6 or later * CentOS Linux (or similar) 7.6 or later * oVirt Node 4.3 (available for x86_64 only) Experimental tech preview for x86_64 and s390x architectures for Fedora 28 is also included. See the release notes [1] for installation / upgrade instructions and a list of new features and bugs fixed. Notes: - oVirt Appliance is available for EL7 only - oVirt Node is available for EL7 only [2] - Fedora 28 based appliance and node couldn't be built due to a bug in Lorax (the tool used to build the images) affecting Fedora 28 and still pending a build from Fedora project. oVirt Node has been updated including: - oVirt 4.3.1: http://www.ovirt.org/release/4.3.1/ - ansible-2.7.8: https://github.com/ansible/ansible/blob/stable-2.7/changelogs/CHANGELOG-v2.… Relevant EPEL Errata included: - FEDORA-EPEL-2019-5f2f93029f security update in Fedora EPEL 7 for ansible ( https://bodhi.fedoraproject.org/updates/FEDORA-EPEL-2019-5f2f93029f ) Relevant CentOS Errata included: - CESA-2019:0231 Important CentOS 7 spice Security Update ( https://lists.centos.org/pipermail/centos-announce/2019-February/023192.html ) - CESA-2019:0368 Important CentOS 7 systemd Security Update ( https://lists.centos.org/pipermail/centos-announce/2019-February/023202.html ) Additional Resources: * Read more about the oVirt 4.3.1 release highlights: http://www.ovirt.org/release/4.3.1/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.3.1/ [2] http://resources.ovirt.org/pub/ovirt-4.3/iso/ -- SANDRO BONAZZOLA MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://red.ht/sig>

1 0

non-redhat version of ovirt-host-deploy
by ivan.kabaivanov＠gmail.com 28 Feb '19

28 Feb '19

Hi, I'm trying to get ovirt working on Linux From Scratch. So far so good, I can build and install it, and engine-setup also works fine. Now, I'm at the last stage, configuring it. And this is where I hit serious trouble: ovirt-host-deploy requires dnf/yum/rpm. But since I'm not running a redhat-based distro, I have none of those. Short of reading the source code, what are the steps I need to manually perform to get a working host? Thanks, IvanK.

2 3

reinstall centos node (ovirt 4.2.7) fails due missing dependency on librbd1
by Mike Lykov 27 Feb '19

27 Feb '19

Hi All! I'm using ovirt-release42-4.2.7.1-1.el7.noarch centos-release-7-5.1804.5.el7.centos.x86_64 And HCI glusterfs deployment (no ceph). And yesterday I wanted an add hosted engine deploy on some node. It requires to enable maintenance mode, reinstall node with "hosted engine = deploy" config (in webui). I made it, but reinstall fails. In logs I see (not full list): ... Feb 27 16:35:39 Updated: libvirt-daemon-4.5.0-10.el7_6.4.x86_64 Feb 27 16:35:39 Updated: libvirt-daemon-driver-storage-core-4.5.0-10.el7_6.4.x86_64 Feb 27 16:36:04 Updated: libvirt-daemon-driver-storage-rbd-4.5.0-10.el7_6.4.x86_64 Feb 27 16:36:04 Updated: libvirt-daemon-driver-storage-disk-4.5.0-10.el7_6.4.x86_64 Feb 27 16:36:04 Updated: libvirt-daemon-driver-storage-4.5.0-10.el7_6.4.x86_64 After it # rpm -q librbd1 librbd1-0.94.5-2.el7.x86_64 фев 27 16:36:51 ovirtnode5.miac systemd[1]: Starting Virtualization daemon... фев 27 16:36:51 ovirtnode5.miac libvirtd[537]: 2019-02-27 12:36:51.338+0000: 537: info : libvirt version: 4.5.0, package: 10.el7_6.4 (CentOS BuildSystem <http://bugs.centos.org>, 2019-01-29-17:31:22, x86-01.bsys.centos.org) фев 27 16:36:51 ovirtnode5.miac libvirtd[537]: 2019-02-27 12:36:51.338+0000: 537: info : hostname: ovirtnode5.miac фев 27 16:36:51 ovirtnode5.miac libvirtd[537]: 2019-02-27 12:36:51.338+0000: 537: error : virModuleLoadFile:53 : внутренняя ошибка: Failed to load module '/usr/lib64/libvirt/storage-backend/libvirt_storage_backend_rbd.so': /usr/lib64/libv irt/storage-backend/libvirt_storage_backend_rbd.so: undefined symbol: rbd_diff_iterate2 фев 27 16:36:51 ovirtnode5.miac systemd[1]: libvirtd.service: main process exited, code=exited, status=3/NOTIMPLEMENTED фев 27 16:36:51 ovirtnode5.miac systemd[1]: Failed to start Virtualization daemon. There is a old bugs like https://bugzilla.redhat.com/show_bug.cgi?id=1316911 or new posts like http://dreamcloud.artark.ca/libvirtd-failure-after-latest-upgrade-in-rhel-c… Obviously, the libvirt* rpms are updated, but librbd* not. But why? Why libvirt packages are not strictly dependenced on all required package/lib versions? libvirt-daemon-driver-storage-rbd must require exactly that librbd version that can work with, i think. -- Mike

1 0

Deploying Self-Hosted Engine Using Cockpit 4.3 not working
by kiv＠intercom.pro 27 Feb '19

27 Feb '19

Hi all. Fresh install host node 4.3. Install ok. Open web ui, and start deploying Self-Hosted Engine. When i add ISCSI storage - i get error: Retrieval of iSCSI targets failed. My iscsi target up and work.

2 1

Feature: Hosted engine VM management
by Roy Golan 26 Feb '19

26 Feb '19

Hi all, Upcoming in 3.6 is enhancement for managing the hosted engine VM. In short, we want to: * Allow editing the Hosted engine VM, storage domain, disks, networks etc * Have a shared configuration for the hosted engine VM * Have a backup for the hosted engine VM configuration please review and comment on the wiki below: http://www.ovirt.org/Hosted_engine_VM_management Thanks, Roy

2 3

Facing issues with settings up shared data-center
by Jinesh Ks 26 Feb '19

26 Feb '19

Host Node3 cannot access the Storage Domain(s) <UNKNOWN> attached to the Data Center Default. Setting Host state to Non-Operational. VDSM Node3 command ConnectStoragePoolVDS failed: Cannot find master domain: u'spUUID=a171b7d6-2c10-11e9-acee-10604b98fee8, msdUUID=bb73461e-02a2-45a6-85fa-5e39d860485c' The error message for connection 10.0.10.11:/exports/data returned by VDSM was: Problem while trying to mount target ----------- we have 3 Nodes, using NFS for storage domain... using shared data center. Anybody can help me?

4 8

game
by shubhamrock19998＠gmail.com 26 Feb '19

26 Feb '19

I really want to spend my time with this game because https://onlinecheckers.net here so more things available.

1 0

unable to put ovirt host in maintenance
by slaurencelle＠hotmail.com 26 Feb '19

26 Feb '19

Hello I'm trying to put one of my ovirt host ( whcih is also the ovirt-engine) into maintenance mode but i receive this error: Error while executing action: Cannot switch Host OvirtHome to Maintenance mode. Image transfer is in progress for the following (5) disks: b6338adf-a43b-4051-9bc0-7bb436876b5e, b8aa8ac8-e4bf-4a31-bd6f-02a33e04f8c6, f8548d7b-40c4-4d1e-9b21-8d4aa4966fff, 3626520b-ba03-452a-833f-4e4d48215047, 4b3242d0-73f6-46c5-99ac-9bac86b4ab41 Please wait for the operations to complete and try again I start does transfert from command line ans they failed, how can i delete the reference to those from the linux command line ? My ovirt version is the 4.3 (latest one) I'm running it on centos 7.6 with latest update Hope someone can help me ! Best regards stephane

4 6

Host ends up non-operational after trying to add it to cluster
by Kristian Petersen 26 Feb '19

26 Feb '19

Hello all, I am building a small two-host oVirt cluster and am experiencing problems adding in the second host. The engine log shows a message saying it is marking the host as non-operational due to it not meeting minimum CPU requirements. However, both hosts are the using the same i7-4770 model CPUs. For some reason, oVirt detects them as the same model but the "CPU Type" from ost1 is listed as "Intel Haswell-noTSX IBRS SSBD Family" while host2's CPU Type is listed as "Intel Haswell-noTSX Family". The two computers are supposedly the exact same model from Dell with the same hardware in them. Anyone have any insight into this issue? -- Kristian Petersen System Administrator BYU Dept. of Chemistry and Biochemistry

1 0

Problems with GlusterFS
by Endre Karlson 26 Feb '19

26 Feb '19

Hi we are seeing a high number of errors / failures within the logs and problems with our ovirt 4.3 cluster. IS there any assumption on a possible fix? The message "E [MSGID: 101191] [event-epoll.c:671:event_dispatch_epoll_worker] 0-epoll: Failed to dispatch handler" repeated 13 times between [2019-02-26 13:53:40.653905] and [2019-02-26 13:54:04.684140] [2019-02-26 13:54:08.684591] I [rpc-clnt.c:2042:rpc_clnt_reconfig] 0-vmstore-client-2: changing port to 49153 (from 0) [2019-02-26 13:54:08.689021] E [MSGID: 101191] [event-epoll.c:671:event_dispatch_epoll_worker] 0-epoll: Failed to dispatch handler ==> /var/log/glusterfs/glustershd.log <== [2019-02-26 13:54:08.783380] I [rpc-clnt.c:2042:rpc_clnt_reconfig] 0-vmstore-client-2: changing port to 49153 (from 0) [2019-02-26 13:54:09.427338] I [rpc-clnt.c:2042:rpc_clnt_reconfig] 0-engine-client-2: changing port to 49152 (from 0) [2019-02-26 13:54:10.785533] I [rpc-clnt.c:2042:rpc_clnt_reconfig] 0-engine-client-2: changing port to 49152 (from 0) [2019-02-26 13:54:12.432411] I [rpc-clnt.c:2042:rpc_clnt_reconfig] 0-vmstore-client-2: changing port to 49153 (from 0) ==> /var/log/glusterfs/rhev-data-center-mnt-glusterSD-ovirt4-stor.creator.local:_engine.log <== [2019-02-26 13:54:12.579095] I [rpc-clnt.c:2042:rpc_clnt_reconfig] 0-engine-client-2: changing port to 49152 (from 0) ==> /var/log/glusterfs/rhev-data-center-mnt-glusterSD-ovirt4-stor.creator.local:vmstore.log <== [2019-02-26 13:54:12.689449] I [rpc-clnt.c:2042:rpc_clnt_reconfig] 0-vmstore-client-2: changing port to 49153 (from 0) ==> /var/log/glusterfs/glustershd.log <== [2019-02-26 13:54:12.790471] I [rpc-clnt.c:2042:rpc_clnt_reconfig] 0-vmstore-client-2: changing port to 49153 (from 0) [2019-02-26 13:54:13.437351] I [rpc-clnt.c:2042:rpc_clnt_reconfig] 0-engine-client-2: changing port to 49152 (from 0)

2 1