- Users - oVirt List Archives

Local Storage domain to Shared
by Matt Simonsen 26 Feb '19

26 Feb '19

Hello all, I have a few nodes with local storage, and I've considered exporting them via NFS to migrate into shared storage, more than a few times. I have thought of this post on the ovirt-users list many times: https://lists.ovirt.org/pipermail/users/2017-December/085521.html Is this procedure documented & fully supported? Or is it something that just happens to work? The instructions provided by Gianluca seem very clear. If this isn't documented better, ie: a blog for the site, what are the things that I should include to make it of value for going on the site? Thanks, Matt

3 2

Re: [oVirt 4.3.1 Test Day] cmdline HE Deployment
by Guillaume Pavese 26 Feb '19

26 Feb '19

It fails too : I made sure PermitTunnel=yes in sshd config but when I try to connect to the forwarded port I get the following error on the openened host ssh session : [gpavese@sheepora-X230 ~]$ ssh -v -L 5900: vs-inf-int-kvm-fr-301-210.hostics.fr:5900 root(a)vs-inf-int-kvm-fr-301-210.hostics.fr ... [root@vs-inf-int-kvm-fr-301-210 ~]# debug1: channel 3: free: direct-tcpip: listening port 5900 for vs-inf-int-kvm-fr-301-210.hostics.fr port 5900, connect from ::1 port 42144 to ::1 port 5900, nchannels 4 debug1: Connection to port 5900 forwarding to vs-inf-int-kvm-fr-301-210.hostics.fr port 5900 requested. debug1: channel 3: new [direct-tcpip] channel 3: open failed: connect failed: Connection refused debug1: channel 3: free: direct-tcpip: listening port 5900 for vs-inf-int-kvm-fr-301-210.hostics.fr port 5900, connect from 127.0.0.1 port 32778 to 127.0.0.1 port 5900, nchannels 4 and in journalctl : févr. 25 14:55:38 vs-inf-int-kvm-fr-301-210.hostics.fr sshd[19595]: error: connect_to vs-inf-int-kvm-fr-301-210.hostics.fr port 5900: failed. Guillaume Pavese Ingénieur Système et Réseau Interactiv-Group On Mon, Feb 25, 2019 at 10:44 PM Simone Tiraboschi <stirabos(a)redhat.com> wrote: > > > > On Mon, Feb 25, 2019 at 2:35 PM Guillaume Pavese < > guillaume.pavese(a)interactiv-group.com> wrote: > >> I made sure of everything and even stopped firewalld but still can't >> connect : >> >> [root@vs-inf-int-kvm-fr-301-210 ~]# cat >> /var/run/libvirt/qemu/HostedEngineLocal.xml >> <graphics type='vnc' port='*5900*' autoport='yes' >> *listen='127.0.0.1*'> >> <listen type='address' address='*127.0.0.1*' fromConfig='1' >> autoGenerated='no'/> >> >> [root@vs-inf-int-kvm-fr-301-210 ~]# netstat -pan | grep 59 >> tcp 0 0 127.0.0.1:5900 0.0.0.0:* >> LISTEN 13376/qemu-kvm >> > > > I suggest to try ssh tunneling, run > ssh -L 5900:vs-inf-int-kvm-fr-301-210.hostics.fr:5900 > root(a)vs-inf-int-kvm-fr-301-210.hostics.fr > > and then > remote-viewer vnc://localhost:5900 > > > >> >> [root@vs-inf-int-kvm-fr-301-210 ~]# systemctl status firewalld.service >> ● firewalld.service - firewalld - dynamic firewall daemon >> Loaded: loaded (/usr/lib/systemd/system/firewalld.service; enabled; >> vendor preset: enabled) >> *Active: inactive (dead)* >> *févr. 25 14:24:03 vs-inf-int-kvm-fr-301-210.hostics.fr >> <http://vs-inf-int-kvm-fr-301-210.hostics.fr> systemd[1]: Stopped firewalld >> - dynamic firewall daemon.* >> >> From my laptop : >> [gpavese@sheepora-X230 ~]$ telnet vs-inf-int-kvm-fr-301-210.hostics.fr >> *5900* >> Trying 10.199.210.11... >> [*nothing gets through...*] >> ^C >> >> For making sure : >> [gpavese@sheepora-X230 ~]$ telnet vs-inf-int-kvm-fr-301-210.hostics.fr >> *9090* >> Trying 10.199.210.11... >> *Connected* to vs-inf-int-kvm-fr-301-210.hostics.fr. >> Escape character is '^]'. >> >> >> >> >> >> Guillaume Pavese >> Ingénieur Système et Réseau >> Interactiv-Group >> >> >> On Mon, Feb 25, 2019 at 10:24 PM Parth Dhanjal <dparth(a)redhat.com> wrote: >> >>> Hey! >>> >>> You can check under /var/run/libvirt/qemu/HostedEngine.xml >>> Search for 'vnc' >>> From there you can look up the port on which the HE VM is available and >>> connect to the same. >>> >>> >>> On Mon, Feb 25, 2019 at 6:47 PM Guillaume Pavese < >>> guillaume.pavese(a)interactiv-group.com> wrote: >>> >>>> 1) I am running in a Nested env, but under libvirt/kvm on remote Centos >>>> 7.4 Hosts >>>> >>>> Please advise how to connect with VNC to the local HE vm. I see it's >>>> running, but this is on a remote host, not my local machine : >>>> qemu 13376 100 3.7 17679424 845216 ? Sl 12:46 85:08 >>>> /usr/libexec/qemu-kvm -name guest=HostedEngineLocal,debug-threads=on -S >>>> -object >>>> secret,id=masterKey0,format=raw,file=/var/lib/libvirt/qemu/domain-1-HostedEngineLocal/master-key.aes >>>> -machine pc-i440fx-rhel7.6.0,accel=kvm,usb=off,dump-guest-core=off -cpu >>>> Haswell-noTSX,+kvmclock -m 16384 -realtime mlock=off -smp >>>> 4,sockets=4,cores=1,threads=1 -uuid 6fe7c1c3-ea93-4343-a385-0d9e14bb563a >>>> -no-user-config -nodefaults -chardev >>>> socket,id=charmonitor,fd=27,server,nowait -mon >>>> chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-shutdown >>>> -global PIIX4_PM.disable_s3=1 -global PIIX4_PM.disable_s4=1 -boot >>>> menu=off,strict=on -device >>>> virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x4 -drive >>>> file=/var/tmp/localvmgmyYik/images/15023c8a-e3a7-4851-a97d-3b90996b423b/07fdcff3-11ce-4f7c-af05-0a878593e78e,format=qcow2,if=none,id=drive-virtio-disk0 >>>> -device >>>> virtio-blk-pci,scsi=off,bus=pci.0,addr=0x5,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1 >>>> -drive >>>> file=/var/tmp/localvmgmyYik/seed.iso,format=raw,if=none,id=drive-ide0-0-0,readonly=on >>>> -device ide-cd,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 -netdev >>>> tap,fd=29,id=hostnet0,vhost=on,vhostfd=30 -device >>>> virtio-net-pci,netdev=hostnet0,id=net0,mac=00:16:3e:3e:fe:28,bus=pci.0,addr=0x3 >>>> -chardev pty,id=charserial0 -device >>>> isa-serial,chardev=charserial0,id=serial0 -chardev >>>> socket,id=charchannel0,fd=31,server,nowait -device >>>> virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=org.qemu.guest_agent.0 >>>> *-vnc 127.0.0.1:0 <http://127.0.0.1:0> -device VGA*,id=video0,vgamem_mb=16,bus=pci.0,addr=0x2 >>>> -object rng-random,id=objrng0,filename=/dev/random -device >>>> virtio-rng-pci,rng=objrng0,id=rng0,bus=pci.0,addr=0x6 -sandbox >>>> on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny >>>> -msg timestamp=on >>>> >>>> >>>> 2) [root@vs-inf-int-kvm-fr-301-210 ~]# cat >>>> /etc/libvirt/qemu/networks/default.xml >>>>  >>>> >>>> <network> >>>> <name>default</name> >>>> <uuid>ba7bbfc8-28b8-459e-a42d-c2d6218e2cb6</uuid> >>>> <forward mode='nat'/> >>>> <bridge name='virbr0' stp='on' delay='0'/> >>>> <mac address='52:54:00:e5:fe:3b'/> >>>> <ip address='192.168.122.1' netmask='255.255.255.0'> >>>> <dhcp> >>>> <range start='192.168.122.2' end='192.168.122.254'/> >>>> </dhcp> >>>> </ip> >>>> </network> >>>> You have new mail in /var/spool/mail/root >>>> [root@vs-inf-int-kvm-fr-301-210 ~] >>>> >>>> >>>> >>>> Guillaume Pavese >>>> Ingénieur Système et Réseau >>>> Interactiv-Group >>>> >>>> >>>> On Mon, Feb 25, 2019 at 9:57 PM Simone Tiraboschi <stirabos(a)redhat.com> >>>> wrote: >>>> >>>>> >>>>> >>>>> On Mon, Feb 25, 2019 at 1:14 PM Guillaume Pavese < >>>>> guillaume.pavese(a)interactiv-group.com> wrote: >>>>> >>>>>> He deployment with "hosted-engine --deploy" fails at TASK >>>>>> [ovirt.hosted_engine_setup : Get local VM IP] >>>>>> >>>>>> See following Error : >>>>>> >>>>>> 2019-02-25 12:46:50,154+0100 INFO >>>>>> otopi.ovirt_hosted_engine_setup.ansible_utils >>>>>> ansible_utils._process_output:109 TASK [ovirt.hosted_engine_setup : Get >>>>>> local VM IP] >>>>>> 2019-02-25 12:55:26,823+0100 DEBUG >>>>>> otopi.ovirt_hosted_engine_setup.ansible_utils >>>>>> ansible_utils._process_output:103 {u'_ansible_parsed': True, >>>>>> u'stderr_lines': [], u'cmd': u"virsh -r net-dhcp-leases default | grep -i 00 >>>>>> :16:3e:3e:fe:28 | awk '{ print $5 }' | cut -f1 -d'/'", u'end': >>>>>> u'2019-02-25 12:55:26.666925', u'_ansible_no_log': False, u'stdout': u'', >>>>>> u'changed': True, u'invocation': {u'module_args': {u'warn': True, >>>>>> u'executable': >>>>>> None, u'_uses_shell': True, u'_raw_params': u"virsh -r >>>>>> net-dhcp-leases default | grep -i 00:16:3e:3e:fe:28 | awk '{ print $5 }' | >>>>>> cut -f1 -d'/'", u'removes': None, u'argv': None, u'creates': None, >>>>>> u'chdir': None, u'std >>>>>> in': None}}, u'start': u'2019-02-25 12:55:26.584686', u'attempts': >>>>>> 50, u'stderr': u'', u'rc': 0, u'delta': u'0:00:00.082239', u'stdout_lines': >>>>>> []} >>>>>> 2019-02-25 12:55:26,924+0100 ERROR >>>>>> otopi.ovirt_hosted_engine_setup.ansible_utils >>>>>> ansible_utils._process_output:107 fatal: [localhost]: FAILED! => >>>>>> {"attempts": 50, "changed": true, "cmd": "virsh -r net-dhcp-leases default >>>>>> | grep -i 00:16:3e:3e:fe:28 | awk '{ print $5 }' | cut -f1 -d'/'", "delta": >>>>>> "0:00:00.082239", "end": "2019-02-25 12:55:26.666925", "rc": 0, "start": >>>>>> "2019-02-25 12:55:26.584686", "stderr": "", "stderr_lines": [], "stdout": >>>>>> "", "stdout_lines": []} >>>>>> >>>>> >>>>> Here we are just waiting for the bootstrap engine VM to fetch an IP >>>>> address from default libvirt network over DHCP but it your case it never >>>>> happened. >>>>> Possible issues: something went wrong in the bootstrap process for the >>>>> engine VM or the default libvirt network is not correctly configured. >>>>> >>>>> 1. can you try to reach the engine VM via VNC and check what's >>>>> happening there? (another question, are you running it nested? AFAIK it >>>>> will not work if nested over ESXi) >>>>> 2. can you please share the output of >>>>> cat /etc/libvirt/qemu/networks/default.xml >>>>> >>>>> >>>>>> >>>>>> Guillaume Pavese >>>>>> Ingénieur Système et Réseau >>>>>> Interactiv-Group >>>>>> _______________________________________________ >>>>>> Users mailing list -- users(a)ovirt.org >>>>>> To unsubscribe send an email to users-leave(a)ovirt.org >>>>>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >>>>>> oVirt Code of Conduct: >>>>>> https://www.ovirt.org/community/about/community-guidelines/ >>>>>> List Archives: >>>>>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/VXRMU3SQWTMB2… >>>>>> >>>>> _______________________________________________ >>>> Users mailing list -- users(a)ovirt.org >>>> To unsubscribe send an email to users-leave(a)ovirt.org >>>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >>>> oVirt Code of Conduct: >>>> https://www.ovirt.org/community/about/community-guidelines/ >>>> List Archives: >>>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/45UR44ITQTV7Y… >>>> >>>

2 11

oVirt-4.2: HE rebooting continuously and 2 hosts non-operatinal
by Parth Dhanjal 26 Feb '19

26 Feb '19

Hey! I'm facing a problem with oVirt-4.2 HE. The HE is rebooting continuously. I tried accessing the VM through the VNC console. But it is not responding. 2 hosts are also Non-Operational. I tried debugging, but couldn't resolve it Though I found a few errors. Error in the agent log for one of the non-operational hosts - http://pastebin.test.redhat.com/721991 Error in the broker log - http://pastebin.test.redhat.com/721990 Also, I couldn't see the brick mounted on the non-op hosts. Even though the volume status seems fine. Anyone knows why is this issue occurring? Regards Parth Dhanjal

2 3

oVirt Node install failed
by kiv＠intercom.pro 26 Feb '19

26 Feb '19

Hi all! The following error occurs during installation oVirt Node 4.2.8: EVENT_ID: VDS_INSTALL_IN_PROGRESS_ERROR(511), An error has occurred during installation of Host hostname_ovirt_node2: Yum Cannot queue package dmidecode: Cannot retrieve metalink for repository: ovirt-4.2-epel/x86_64. Please verify its path and try again From shell ovirt node type command: yum install dmidecode Cannot retrieve metalink for repository: ovirt-4.2-epel/x86_64. Please verify its path and try again Uploading Enabled Repositories Report Loaded plugins: fastestmirror, product-id, subscription-manager This system is not registered with an entitlement server. You can use subscription-manager to register. Cannot upload enabled repos report, is this client registered? Does anyone know how to fix this?

3 11

AIC JBOD RAID Disks automatically going offline under OVirt?
by nikhilbhalwankar＠yahoo.co.in 26 Feb '19

26 Feb '19

Hi, We are facing weird issue. We have a AIC JBOD with Ovirt Node installed. This Node is added under Ovirt engine. We faced issues related to RAID Disks going offline two times, 1) OVA Import from VMWare ESXi to OVirt 2) Delete existing OVirt VM which is in shutdown state In both these cases, suddenly Disks from RAID array (which we are using as Fiber Channel under OVirt) go offline. Can anybody please help what can be done in this case?

1 0

AIC JBOD RAID Disks automatically going offline under OVirt?
by nikhilbhalwankar＠yahoo.co.in 26 Feb '19

26 Feb '19

Hi, We are facing weird issue. We have a AIC JBOD with Ovirt Node installed. This Node is added under Ovirt engine. We faced issues related to RAID Disks going offline two times, 1) OVA Import from VMWare ESXi to OVirt 2) Delete existing OVirt VM which is in shutdown state In both these cases, suddenly Disks from RAID array (which we are using as Fiber Channel under OVirt) go offline. Can anybody please help what can be done in this case?

1 0

glusterevents daemon fails after upgrade from 4.2.8 to 4.3
by Edward Berger 26 Feb '19

26 Feb '19

I upgraded some nodes from 4.28 to 4.3 and now when I look at the cockpit "services" tab I see a red failure for Gluster Events Notifier and clicking through I get these messages below. 14:00 glustereventsd.service failed. systemd 14:00 Unit glustereventsd.service entered failed state. systemd 14:00 glustereventsd.service: main process exited, code=exited, status=1/FAILURE systemd 14:00 ValueError: Attempted relative import in non-package glustereventsd 14:00 from .eventsapiconf import (LOG_FILE, glustereventsd 14:00 File "/usr/libexec/glusterfs/events/utils.py", line 29, in <module> glustereventsd 14:00 import utils glustereventsd 14:00 File "/usr/libexec/glusterfs/events/handlers.py", line 12, in <module> glustereventsd 14:00 import handlers glustereventsd 14:00 File "/usr/sbin/glustereventsd", line 24, in <module> glustereventsd

5 6

Re: [ovirt-users] Large DWH Database, how to empty
by Matt . 26 Feb '19

26 Feb '19

Hi, OK thanks! I saw that after upgrading to 4.0.5 from 4.0.4 the DB already dropped with around 500MB directly and is now at 2GB smaller. Does this sounds familiar to you with other settings in 4.0.5 ? Thanks, Matt 2017-01-08 10:45 GMT+01:00 Shirly Radco <sradco(a)redhat.com>: > No. That will corrupt your database. > > Are you using the full dwh or the smaller version for the dashboards? > > Please set the delete thresholds to save less data and the data older then > the time you set will be deleted. > Add a file to /ovirt-engine-dwhd.conf.d/ > update_time_to_keep_records.conf > > Add these lines with the new configurations. The numbers represent the hours > to keep the data. > > DWH_TABLES_KEEP_SAMPLES=24 > DWH_TABLES_KEEP_HOURLY=1440 > DWH_TABLES_KEEP_DAILY=43800 > > > These are the configurations for a full dwh. > > The smaller version configurations are: > DWH_TABLES_KEEP_SAMPLES=24 > DWH_TABLES_KEEP_HOURLY=720 > DWH_TABLES_KEEP_DAILY=0 > > The delete process by default at 3am every day (DWH_DELETE_JOB_HOUR=3) > > Best regards, > > Shirly Radco > > BI Software Engineer > Red Hat Israel Ltd. > 34 Jerusalem Road > Building A, 4th floor > Ra'anana, Israel 4350109 > > > On Fri, Jan 6, 2017 at 6:35 PM, Matt . <yamakasi.014(a)gmail.com> wrote: >> >> Hi, >> >> I seem to have some large database for the DWH logging and I wonder >> how I can empty it safely. >> >> Can I just simply empty the database ? >> >> Have a good weekend! >> >> Cheers, >> >> Matt >> _______________________________________________ >> Users mailing list >> Users(a)ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users > >

1 0

engine-iso-uploader very slow
by t.marchetti＠caen.it 26 Feb '19

26 Feb '19

Hi, I'm a newbe with ovirt, I've install on my test machine ovirt with self hosted engine with nfs storage. I'm tryng to execute <engine-iso-uploader upload -i ISO /tmp/ubuntu-18.04-desktop-amd64.iso> and the execution is very slow, approx 2 hour, but I don't know why, any suggestion? Thanks in advance Bye

4 3

Re: [ovirt-users] Packet loss
by Doron Fediuck 26 Feb '19

26 Feb '19

----_com.android.email_640187878761650 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: base64 SGkgS3lsZSzCoApXZSBtYXkgaGF2ZSBzZWVuIHNvbWV0aGluZyBzaW1pbGFyIGluIHRoZSBwYXN0 IGJ1dCBJIHRoaW5rIHRoZXJlIHdlcmUgdmxhbnMgaW52b2x2ZWQuwqAKSXMgaXQgdGhlIHNhbWUg Zm9yIHlvdT/CoApUb255IC8gRGFuLCBkb2VzIGl0IHJpbmcgYSBiZWxsP8Kg ----_com.android.email_640187878761650 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: base64 PGh0bWw+PGhlYWQ+PG1ldGEgaHR0cC1lcXVpdj0iQ29udGVudC1UeXBlIiBjb250ZW50PSJ0ZXh0 L2h0bWw7IGNoYXJzZXQ9VVRGLTgiPjwvaGVhZD48Ym9keSA+PGRpdj5IaSBLeWxlLCZuYnNwOzwv ZGl2PjxkaXY+V2UgbWF5IGhhdmUgc2VlbiBzb21ldGhpbmcgc2ltaWxhciBpbiB0aGUgcGFzdCBi dXQgSSB0aGluayB0aGVyZSB3ZXJlIHZsYW5zIGludm9sdmVkLiZuYnNwOzwvZGl2PjxkaXY+SXMg aXQgdGhlIHNhbWUgZm9yIHlvdT8mbmJzcDs8L2Rpdj48ZGl2PlRvbnkgLyBEYW4sIGRvZXMgaXQg cmluZyBhIGJlbGw/Jm5ic3A7PC9kaXY+PC9ib2R5PjwvaHRtbD4= ----_com.android.email_640187878761650--

2 1