- Users - oVirt List Archives

newbie questions on networking
by Rue, Randy 08 May '18

08 May '18

Hi All, I'm new to oVirt and have set up a basic cluster of an engine and five hosts, using the quick start and default settings as much as possible. I confess it's taken some heavy flailing to get this far, the docs all seem to be for the previous versions and the latest greatest appears to be significantly different. I now have a working data center / cluster /hosts and a bouncing baby ubuntu server LTS VM. My VM is getting a DHCP address and nameservers from the data center the hosts sit in. But from the VM I can only ping the IP of the host the VM is on. Can't reach the gateway of the local subnet, or anything in the real world. Am I missing some step? the "Quick Start" doesn't say much beyond "The ovirtmgmt Management network is used for this document, however if you wish to create new logical networks see the oVirt Administration Guide." The admin guide has information on creating new networks but I'm not spotting the parts I need to connect my VM to the real world. Or how to attach another network to the host if all NICs are in use. Short Version: * Is some change needed to allow VMs on the ovirtmgmt network to connect to the real world? If so, what? * Is the ovirtmgmt network not meant for "commodity" use, and instead I should have some other network? If so, how do I connect that to the real LAN/WAN, and how do I replace the ovirtmgmt with it? (my hosts each only have two NICs bonded in a pair). Hope to hear from you, Randy in Seattle

4 14

Problems with OVN
by Samuli Heinonen 08 May '18

08 May '18

Hi all, I'm building a home lab using oVirt+GlusterFS in hyperconverged(ish) setup. My setup consists of 2x nodes with ASRock H110M-STX motherboard, Intel Pentium G4560 3,5 GHz CPU and 16 GB RAM. Motherboard has integrated Intel Gigabit I219V LAN. At the moment I'm using RaspberryPi as Gluster arbiter node. Nodes are connected to basic "desktop switch" without any management available. Hardware is nowhere near perfect, but it get its job done and is enough for playing around. However I'm having problems getting OVN to work properly and I'm clueless where to look next. oVirt is setup like this: oVirt engine host oe / 10.0.1.101 oVirt hypervisor host o2 / 10.0.1.18 oVirt hypervisor host o3 / 10.0.1.21 OVN network 10.0.200.0/24 When I spin up a VM in o2 and o3 with IP address in network 10.0.1.0/24 everything works fine. VMs can interact between each other without any problems. Problems show up when I try to use OVN based network between virtual machines. If virtual machines are on same hypervisor then everything seems to work ok. But if I have virtual machine on hypervisor o2 and another one on hypervisor o3 then TCP connections doesn't work very well. UDP seems to be ok and it's possible to ping hosts, do dns & ntp queries and so on. Problem with TCP is that for example when taking SSH connection to another host at some point connection just hangs and most of the time it's not even possible to even log in before connectiong hangs. If I look into tcpdump at that point it looks like packets never reach destination. Also, if I have multiple connections, then all of them hang at the same time. I have tried switching off tx checksum and other similar settings, but it didn't make any difference. I'm suspecting that hardware is not good enough. Before investigating into new hardware I'd like to get some confirmation that everything is setup correctly. When setting up oVirt/OVN I had to run following undocumented command to get it working at all: vdsm-tool ovn-config 10.0.1.101 10.0.1.21 (oVirt engine IP, hypervisor IP). Especially this makes me think that I have missed some crucial part in configuration. On oVirt engine in /var/log/openvswitch/ovsdb-server-nb.log there are error messages: 2018-05-06T08:30:05.418Z|00913|stream_ssl|WARN|SSL_read: unexpected SSL connection close 2018-05-06T08:30:05.418Z|00914|jsonrpc|WARN|ssl:127.0.0.1:53152: receive error: Protocol error 2018-05-06T08:30:05.419Z|00915|reconnect|WARN|ssl:127.0.0.1:53152: connection dropped (Protocol error) To be honest, I'm not sure what's causing those error messages or are they related. I found out some bug reports stating that they are not critical. Any ideas what to do next or should I just get better hardware? :) Best regards, Samuli Heinonen

2 7

Re-attaching ISOs and moving ISOs storage
by Callum Smith 08 May '18

08 May '18

--_000_DDD9531266F74CA59A0180B14810823Cwelloxacuk_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Dear All, It appears that clicking "detach" on the ISO storage domain is a really bad= idea. This has gotten half way through the procedure and now can't be reco= vered from. Is there any advice for re-attaching the ISO storage domain man= ually? An NFS mount didn't add it back to the "pool" unfortunately. On a separate note, is it possible to migrate this storage to a new locatio= n? And if so how. Regards, Callum -- Callum Smith Research Computing Core Wellcome Trust Centre for Human Genetics University of Oxford e. callum(a)well.ox.ac.uk<mailto:callum@well.ox.ac.uk> --_000_DDD9531266F74CA59A0180B14810823Cwelloxacuk_ Content-Type: text/html; charset="us-ascii" Content-ID: <1847FC58E1CB3740851381BF7C769B9A(a)well.ox.ac.uk> Content-Transfer-Encoding: quoted-printable <html> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > </head> <body style=3D"word-wrap: break-word; -webkit-nbsp-mode: space; line-break:= after-white-space;" class=3D""> Dear All, <div class=3D""><br class=3D""> </div> <div class=3D"">It appears that clicking "detach" on the ISO stor= age domain is a really bad idea. This has gotten half way through the proce= dure and now can't be recovered from. Is there any advice for re-attaching = the ISO storage domain manually? An NFS mount didn't add it back to the "pool" unfortunately.</div> <div class=3D""><br class=3D""> </div> <div class=3D"">On a separate note, is it possible to migrate this storage = to a new location? And if so how.</div> <div class=3D""><br class=3D""> <div class=3D""> <div style=3D"color: rgb(0, 0, 0); letter-spacing: normal; text-align: star= t; text-indent: 0px; text-transform: none; white-space: normal; word-spacin= g: 0px; -webkit-text-stroke-width: 0px; word-wrap: break-word; -webkit-nbsp= -mode: space; -webkit-line-break: after-white-space;" class=3D""> <div style=3D"word-wrap: break-word; -webkit-nbsp-mode: space; -webkit-line= -break: after-white-space;" class=3D""> <div style=3D"color: rgb(0, 0, 0); font-family: Arial; font-size: 13px; fon= t-style: normal; font-variant-caps: normal; font-weight: normal; letter-spa= cing: normal; text-align: start; text-indent: 0px; text-transform: none; wh= ite-space: normal; word-spacing: 0px; -webkit-text-stroke-width: 0px;"> Regards,</div> <div style=3D"color: rgb(0, 0, 0); font-family: Arial; font-size: 13px; fon= t-style: normal; font-variant-caps: normal; font-weight: normal; letter-spa= cing: normal; text-align: start; text-indent: 0px; text-transform: none; wh= ite-space: normal; word-spacing: 0px; -webkit-text-stroke-width: 0px;"> Callum</div> <div style=3D"color: rgb(0, 0, 0); font-family: Arial; font-size: 13px; fon= t-style: normal; font-variant-caps: normal; font-weight: normal; letter-spa= cing: normal; text-align: start; text-indent: 0px; text-transform: none; wh= ite-space: normal; word-spacing: 0px; -webkit-text-stroke-width: 0px;"> <br class=3D""> </div> <div style=3D"color: rgb(0, 0, 0); font-family: Arial; font-size: 13px; fon= t-style: normal; font-variant-caps: normal; font-weight: normal; letter-spa= cing: normal; text-align: start; text-indent: 0px; text-transform: none; wh= ite-space: normal; word-spacing: 0px; -webkit-text-stroke-width: 0px;"> --<br class=3D""> <br class=3D""> Callum Smith</div> <div style=3D"color: rgb(0, 0, 0); font-family: Arial; font-size: 13px; fon= t-style: normal; font-variant-caps: normal; font-weight: normal; letter-spa= cing: normal; text-align: start; text-indent: 0px; text-transform: none; wh= ite-space: normal; word-spacing: 0px; -webkit-text-stroke-width: 0px;"> Research Computing Core</div> <div style=3D"color: rgb(0, 0, 0); font-family: Arial; font-size: 13px; fon= t-style: normal; font-variant-caps: normal; font-weight: normal; letter-spa= cing: normal; text-align: start; text-indent: 0px; text-transform: none; wh= ite-space: normal; word-spacing: 0px; -webkit-text-stroke-width: 0px;"> Wellcome Trust Centre for Human Genetics<br class=3D""> University of Oxford<br class=3D""> e. <a href=3D"mailto:callum@well.ox.ac.uk" class=3D"">callum(a)well.ox.ac.uk<= /a></div> </div> </div> </div> <br class=3D""> </div> </body> </html> --_000_DDD9531266F74CA59A0180B14810823Cwelloxacuk_--

2 10

Host install failed - cannot set maintenance or remove
by Callum Smith 08 May '18

08 May '18

Dear All, There appears to be an issue with the host install on these, there's quite a lot of errors being kicked out into the logs as they cycle through attempting to activate, failing, and then failing to go into maintenance. I can't remove the hosts from the engine to attempt to reinstall them. Issue presented from having a statically configured network on the ovritmgmt network on the hosts before running the host install. There are SQL errors (FK missing) and assorted goodness in there. Any help greatly appreciated, not sure what the next step forward is from here. Regards, Callum -- Callum Smith Research Computing Core Wellcome Trust Centre for Human Genetics University of Oxford e. callum(a)well.ox.ac.uk<mailto:callum@well.ox.ac.uk>

1 0

dracut-initqueue[488]: Warning: Could not boot.
by Abdelkarim ZANNI 08 May '18

08 May '18

This is a multi-part message in MIME format. --------------0D1D10AD4B3F62D3D58E49BB Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 7bit Hello Ovirt users, i'm trying to install ovirt node on a Dell server using a bootable usb. After i click install ovirt, the following message is displayed on the screen; /*dracut-initqueue[488]: Warning: Could not boot*. / I tried different version of Ovirt node without success, can anyone point me to how to sort this out ? Thank you in advance/. / -- Abdelkarim ZANNI GSM: +212671644088 NUMEA | Rabat - Morocco --------------0D1D10AD4B3F62D3D58E49BB Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=utf-8"> </head> <body text="#000000" bgcolor="#FFFFFF"> <p><font size="+1">Hello Ovirt users,</font></p> <p><font size="+1"><br> </font></p> <p><font size="+1">i'm trying to install ovirt node on a Dell server using a bootable usb.</font></p> <p><font size="+1">After i click install ovirt, the following message is displayed on the screen;<br> </font></p> <pre><font size="+1"><i><b>dracut-initqueue[488]: Warning: Could not boot</b>. </i> I tried different version of Ovirt node without success, can anyone point me to how to sort this out ? Thank you in advance</font><i><font size="+1">. </font> </i></pre> <pre class="moz-signature" cols="72">-- Abdelkarim ZANNI GSM: +212671644088 NUMEA | Rabat - Morocco</pre> </body> </html> --------------0D1D10AD4B3F62D3D58E49BB--

4 3

oVirt and Oracle Linux support
by Simon Coter 07 May '18

07 May '18

Hi, I'm new to this ML. I started to play a bit with oVirt and I saw that you actually support RH and CentOS. Is there any plan to also support Oracle Linux ? I had to fight so much to get everything on OL correctly running. Thanks Simon

3 4

Re: [ovirt-users] problem to create snapshot
by Ala Hino 07 May '18

07 May '18

[Please always CC ovirt-users so other engineer can provide help] It seems that the storage domain is corrupted. Can you please run the following command and send the output? vdsm-client StorageDomain getInfo storagedomainID=<sdUUID> You may need to move the storage to maintenance and re-initialize it. On Thu, May 3, 2018 at 10:10 PM, Marcelo Leandro <marceloltmm(a)gmail.com> wrote: > Hello, > > Thank you for reply: > > oVirt Version - 4.1.9 > Vdsm Versoin - 4.20.23 > > attached logs, > > Very Thanks. > > Marcelo Leandro > > 2018-05-03 15:59 GMT-03:00 Ala Hino <ahino(a)redhat.com>: > >> Can you please share more info? >> - The version you are using >> - Full log of vdsm and the engine >> >> Is the VM running or down while creating the snapshot? >> >> On Thu, May 3, 2018 at 8:32 PM, Marcelo Leandro <marceloltmm(a)gmail.com> >> wrote: >> >>> Anyone help me? >>> >>> 2018-05-02 17:55 GMT-03:00 Marcelo Leandro <marceloltmm(a)gmail.com>: >>> >>>> Hello , >>>> >>>> I am geting error when try do a snapshot: >>>> >>>> Error msg in SPM log. >>>> >>>> 2018-05-02 17:46:11,235-0300 WARN (tasks/2) [storage.ResourceManager] >>>> Resource factory failed to create resource '01_img_6e5cce71-3438-4045-9d5 >>>> 4-607123e0557e.ed7f1c0f-5986-4979-b783-5c465b0854c6'. Canceling >>>> request. (resourceManager:543) >>>> Traceback (most recent call last): >>>> File "/usr/lib/python2.7/site-packages/vdsm/storage/resourceManager.py", >>>> line 539, in registerResource >>>> obj = namespaceObj.factory.createResource(name, lockType) >>>> File "/usr/lib/python2.7/site-packages/vdsm/storage/resourceFactories.py", >>>> line 193, in createResource >>>> lockType) >>>> File "/usr/lib/python2.7/site-packages/vdsm/storage/resourceFactories.py", >>>> line 122, in __getResourceCandidatesList >>>> imgUUID=resourceName) >>>> File "/usr/lib/python2.7/site-packages/vdsm/storage/image.py", line >>>> 213, in getChain >>>> if srcVol.isLeaf(): >>>> File "/usr/lib/python2.7/site-packages/vdsm/storage/volume.py", line >>>> 1430, in isLeaf >>>> return self._manifest.isLeaf() >>>> File "/usr/lib/python2.7/site-packages/vdsm/storage/volume.py", line >>>> 138, in isLeaf >>>> return self.getVolType() == sc.type2name(sc.LEAF_VOL) >>>> File "/usr/lib/python2.7/site-packages/vdsm/storage/volume.py", line >>>> 134, in getVolType >>>> self.voltype = self.getMetaParam(sc.VOLTYPE) >>>> File "/usr/lib/python2.7/site-packages/vdsm/storage/volume.py", line >>>> 118, in getMetaParam >>>> meta = self.getMetadata() >>>> File "/usr/lib/python2.7/site-packages/vdsm/storage/blockVolume.py", >>>> line 112, in getMetadata >>>> md = VolumeMetadata.from_lines(lines) >>>> File "/usr/lib/python2.7/site-packages/vdsm/storage/volumemetadata.py", >>>> line 103, in from_lines >>>> "Missing metadata key: %s: found: %s" % (e, md)) >>>> MetaDataKeyNotFoundError: Meta Data key not found error: ("Missing >>>> metadata key: 'DOMAIN': found: {'NONE': '############################# >>>> ############################################################ >>>> ############################################################ >>>> ############################################################ >>>> ############################################################ >>>> ############################################################ >>>> ############################################################ >>>> ############################################################ >>>> #####################################################'}",) >>>> 2018-05-02 17:46:11,286-0300 WARN (tasks/2) >>>> [storage.ResourceManager.Request] (ResName='01_img_6e5cce71-3438 >>>> -4045-9d54-607123e0557e.ed7f1c0f-5986-4979-b783-5c465b0854c6', >>>> ReqID='a3cd9388-977b-45b9-9aa0-e431aeff8750') Tried to cancel a >>>> processed request (resourceManager:187) >>>> 2018-05-02 17:46:11,286-0300 ERROR (tasks/2) [storage.TaskManager.Task] >>>> (Task='ba0766ca-08a1-4d65-a4e9-1e0171939037') Unexpected error >>>> (task:875) >>>> Traceback (most recent call last): >>>> File "/usr/lib/python2.7/site-packages/vdsm/storage/task.py", line >>>> 882, in _run >>>> return fn(*args, **kargs) >>>> File "/usr/lib/python2.7/site-packages/vdsm/storage/task.py", line >>>> 336, in run >>>> return self.cmd(*self.argslist, **self.argsdict) >>>> File "/usr/lib/python2.7/site-packages/vdsm/storage/securable.py", >>>> line 79, in wrapper >>>> return method(self, *args, **kwargs) >>>> File "/usr/lib/python2.7/site-packages/vdsm/storage/sp.py", line >>>> 1938, in createVolume >>>> with rm.acquireResource(img_ns, imgUUID, rm.EXCLUSIVE): >>>> File "/usr/lib/python2.7/site-packages/vdsm/storage/resourceManager.py", >>>> line 1025, in acquireResource >>>> return _manager.acquireResource(namespace, name, lockType, >>>> timeout=timeout) >>>> File "/usr/lib/python2.7/site-packages/vdsm/storage/resourceManager.py", >>>> line 475, in acquireResource >>>> raise se.ResourceAcqusitionFailed() >>>> ResourceAcqusitionFailed: Could not acquire resource. Probably resource >>>> factory threw an exception.: () >>>> >>>> >>>> Anyone help? >>>> >>> >>> >>> _______________________________________________ >>> Users mailing list >>> Users(a)ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >>> >> >

2 1

managing local users in 4.2 ?
by Matthias Leopold 06 May '18

06 May '18

Hi, i tried to create a local user in oVirt 4.2 with "ovirt-aaa-jdbc-tool user add" (like i did in oVirt 4.1.9). the command worked ok, but the created user wasn't visible in the web gui. i then used the "add" button in admin portal to add the already existing user and after that the user was visible. i didn't have to do that in 4.1.9, the "add" button was already there the, but i didn't know what to do with it. how did managing local users change in 4.2? thx matthias

3 3

ansible failure during host install
by Young, Matthew (Numerical Algorithms Group) 06 May '18

06 May '18

--_000_C3425601B4F77C49A7674BEF0DEB80CB1AA98Cde35s00fhst07DSCB_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hello all, I have been working on adding a new host to an oVirt cluster. The installa= tion is failing in the ansible portion, specifically installing the ansible= elasticsearch ca cert. I have no experience with ansible. Does anyone kn= ow what is causing this issue? Or how to create this ca cert? **** from ansible log**** ... 2018-04-12 09:32:18,114 p=3D56616 u=3Dovirt | TASK [oVirt.ovirt-fluentd/fl= uentd-setup : Create fluentd.conf] ***************** 2018-04-12 09:32:18,730 p=3D56616 u=3Dovirt | ok: [10.222.10.156] =3D> { "changed": false, "checksum": "c9f88b60cd12ab8e3f3ffce1ae07654c89b06ef6", "gid": 0, "group": "root", "mode": "0640", "owner": "root", "path": "/etc/fluentd/fluent.conf", "secontext": "system_u:object_r:etc_t:s0", "size": 58, "state": "file", "uid": 0 } 2018-04-12 09:32:18,739 p=3D56616 u=3Dovirt | TASK [oVirt.ovirt-fluentd/fl= uentd-setup : Install fluentd certificate] ********* 2018-04-12 09:32:18,759 p=3D56616 u=3Dovirt | skipping: [10.222.10.156] = =3D> { "changed": false, "skip_reason": "Conditional result was False" } 2018-04-12 09:32:18,768 p=3D56616 u=3Dovirt | TASK [oVirt.ovirt-fluentd/fl= uentd-setup : Install fluentd elasticsearch CA certificate] *** 2018-04-12 09:32:18,810 p=3D56616 u=3Dovirt | fatal: [10.222.10.156]: FAIL= ED! =3D> { "changed": false } MSG: src (or content) is required 2018-04-12 09:32:18,812 p=3D56616 u=3Dovirt | PLAY RECAP *****************= **************************************************** 2018-04-12 09:32:18,812 p=3D56616 u=3Dovirt | 10.222.10.156 := ok=3D33 changed=3D4 unreachable=3D0 failed=3D1 ************ --_000_C3425601B4F77C49A7674BEF0DEB80CB1AA98Cde35s00fhst07DSCB_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <meta name=3D"Generator" content=3D"Microsoft Word 15 (filtered medium)"> <style></style> </head> <body lang=3D"EN-US" link=3D"#0563C1" vlink=3D"#954F72"> <div class=3D"WordSection1"> <p class=3D"MsoNormal">Hello all,<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">I have been working on adding a new host to an oVirt= cluster.  The installation is failing in the ansible portion, specifi= cally installing the ansible elasticsearch ca cert.  I have no experie= nce with ansible.  Does anyone know what is causing this issue?  Or how to create this ca cert?<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">**** from ansible log****<o:p></o:p></p> <p class=3D"MsoNormal">…<o:p></o:p></p> <p class=3D"MsoNormal">2018-04-12 09:32:18,114 p=3D56616 u=3Dovirt |  = TASK [oVirt.ovirt-fluentd/fluentd-setup : Create fluentd.conf] ************= *****<o:p></o:p></p> <p class=3D"MsoNormal">2018-04-12 09:32:18,730 p=3D56616 u=3Dovirt |  = ok: [10.222.10.156] =3D> {<o:p></o:p></p> <p class=3D"MsoNormal">    "changed": false,<o:p><= /o:p></p> <p class=3D"MsoNormal">    "checksum": "c9f88= b60cd12ab8e3f3ffce1ae07654c89b06ef6",<o:p></o:p></p> <p class=3D"MsoNormal">    "gid": 0,<o:p></o:p></p= > <p class=3D"MsoNormal">    "group": "root&quo= t;,<o:p></o:p></p> <p class=3D"MsoNormal">    "mode": "0640&quot= ;,<o:p></o:p></p> <p class=3D"MsoNormal">    "owner": "root&quo= t;,<o:p></o:p></p> <p class=3D"MsoNormal">    "path": "/etc/flue= ntd/fluent.conf",<o:p></o:p></p> <p class=3D"MsoNormal">    "secontext": "syst= em_u:object_r:etc_t:s0",<o:p></o:p></p> <p class=3D"MsoNormal">    "size": 58,<o:p></o:p><= /p> <p class=3D"MsoNormal">    "state": "file&quo= t;,<o:p></o:p></p> <p class=3D"MsoNormal">    "uid": 0<o:p></o:p></p> <p class=3D"MsoNormal">}<o:p></o:p></p> <p class=3D"MsoNormal">2018-04-12 09:32:18,739 p=3D56616 u=3Dovirt |  = TASK [oVirt.ovirt-fluentd/fluentd-setup : Install fluentd certificate] ****= *****<o:p></o:p></p> <p class=3D"MsoNormal">2018-04-12 09:32:18,759 p=3D56616 u=3Dovirt |  = skipping: [10.222.10.156] =3D> {<o:p></o:p></p> <p class=3D"MsoNormal">    "changed": false,<o:p><= /o:p></p> <p class=3D"MsoNormal">    "skip_reason": "Co= nditional result was False"<o:p></o:p></p> <p class=3D"MsoNormal">}<o:p></o:p></p> <p class=3D"MsoNormal">2018-04-12 09:32:18,768 p=3D56616 u=3Dovirt |  = TASK [oVirt.ovirt-fluentd/fluentd-setup : Install fluentd elasticsearch CA = certificate] ***<o:p></o:p></p> <p class=3D"MsoNormal">2018-04-12 09:32:18,810 p=3D56616 u=3Dovirt |  = fatal: [10.222.10.156]: FAILED! =3D> {<o:p></o:p></p> <p class=3D"MsoNormal">    "changed": false<o:p></= o:p></p> <p class=3D"MsoNormal">}<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">MSG:<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">src (or content) is required<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">2018-04-12 09:32:18,812 p=3D56616 u=3Dovirt |  = PLAY RECAP ****************************************************************= *****<o:p></o:p></p> <p class=3D"MsoNormal">2018-04-12 09:32:18,812 p=3D56616 u=3Dovirt |  = 10.222.10.156          &n= bsp;   : ok=3D33   changed=3D4    unreac= hable=3D0    failed=3D1<o:p></o:p></p> <p class=3D"MsoNormal"><o:p> </o:p></p> <p class=3D"MsoNormal">************<o:p></o:p></p> </div> </body> </html> --_000_C3425601B4F77C49A7674BEF0DEB80CB1AA98Cde35s00fhst07DSCB_--

2 5

Ovirt 3.5 Does not start ovirt-engine after restore
by Tácito Chaves 06 May '18

06 May '18

--_000_FR1PR80MB034209657132B4D80A7B7746E9870FR1PR80MB0342lamp_ Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hello guys! Could any of you help me with my manager's backup / restore? I followed the documentation to create my backup and restore on another ser= ver but I'm having trouble accessing the panel after the restore is complet= e. can anybody help me? The steps are listed in this file: http://paste.scsys.co.uk/577382 and just remembering, I'm using version 3.5 and the hostname is the same as= the one I'm trying to migrate. The unfortunate message I receive is the following: ovirt-engine: ERROR run= : 532 Error: process terminated with status code 1 With this the service does not rise! Thank you! T=E1cito --_000_FR1PR80MB034209657132B4D80A7B7746E9870FR1PR80MB0342lamp_ Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <html> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Diso-8859-= 1"> <style type=3D"text/css" style=3D"display:none;"> P {margin-top:0;margin-bo= ttom:0;} </style> </head> <body dir=3D"ltr"> <div style=3D"font-family: Calibri, Helvetica, sans-serif; font-size: 12pt;= color: rgb(0, 0, 0); background-color: rgb(255, 255, 255);"> <span id=3D"result_box" class=3D"" lang=3D"en"><span>Hello guys!</span><br> <br> <span>Could any of you help me with my manager's backup / restore?</span><b= r> <br> <span>I followed the documentation to create my backup and restore on anoth= er server but I'm having trouble accessing the panel after the restore is c= omplete.</span><br> <br> <span>can anybody help me?</span><br> <br> <span>The steps are listed in this file:</span> http://paste.scsys.co.uk/57= 7382<br> <br> <span>and just remembering, I'm using version 3.5 and the hostname is the s= ame as the one I'm trying to migrate.</span><br> <br> <span id=3D"result_box" class=3D"" lang=3D"en"><span class=3D"">The unfortu= nate message I receive is the following: ovirt-engine: ERROR run: 532 Error= : process terminated with status code 1</span><br> <br> <span class=3D"">With this the service does not rise!</span></span><br> <br> <span class=3D"">Thank you!</span><br> <br> <span>T=E1cito</span></span><br> </div> </body> </html> --_000_FR1PR80MB034209657132B4D80A7B7746E9870FR1PR80MB0342lamp_--

3 2