- Devel - oVirt List Archives

[OST][HC] Failed to deploy HE
by Sahina Bose 08 Mar '18

08 Mar '18

Error is - The host has been set in non_operational status, please check engine logs, fix accordingly and re-deploy. However there are no engine logs available. Is this error seen in HE suite as well? On Thu, Mar 8, 2018 at 8:58 AM, <jenkins(a)jenkins.phx.ovirt.org> wrote: > Project: http://jenkins.ovirt.org/job/ovirt-system-tests_hc-basic- > suite-master/ > Build: http://jenkins.ovirt.org/job/ovirt-system-tests_hc-basic- > suite-master/213/ > Build Number: 213 > Build Status: Failure > Triggered By: Started by timer > > ------------------------------------- > Changes Since Last Success: > ------------------------------------- > Changes for Build #213 > [Sandro Bonazzola] image-ng-suite-4.2: sync 001_initialize_engine > > [Barak Korren] Enable mock to use bootstrap chroot for FC27/RAW > > [Sandro Bonazzola] gerrit-admin: move to el7 > > [Daniel Belenky] Add symlinks resolving capabilities to usrc > > [Barak Korren] Fix auto-merge in downstream instances > > [Dafna Ron] sync_mirror: removing fc24 > > > > > ----------------- > Failed Tests: > ----------------- > No tests ran.

2 1

[ACTION REQUIRED] fixing CI on FC27 and RAWHIDE
by Barak Korren 08 Mar '18

08 Mar '18

Hi to all maintainers, TL;DR: If you use yum-utils on fedora (For e.g using yum-builddep) you need to switch to dnf-utils. As you may know we had encountered many issues when trying to get CI to work well for FC27 and Fedora RAWHIDE. One of the main reasons for the issues we've seen was that we were using 'yum' instead of 'dnf' to setup Fedora build and test environments. In FC27 and RAWHIDe, some packages simply stopped being compatible with yum. It took us a while to resolve this since we needed to get some patches merged upstream to the tools we use, but since yesterday we switched to using DNF for setting up FC environments. While we were waiting for the tools to get patched, our work-around was to freeze the mirrors our CI system uses so that newer and incompatible packages were invisible in CI. Since we now have a fix in place we started re-syncing our mirrors to get newer packages. A side effect of this, is that dnf-incompatible code in build and test scripts was exposed. One such common case is scripts using 'yum-builddep' with 'yum-utils' installed instead of 'dnf-utils'. In this case yum-incompatible packages will fail to be downloaded. Bottom line - if you use yum-based tools in your build/test scripts, they need to be changed to dnf-based tools when those scripts run in Fedora. Sometime this can be as simple as changing the packages listed in your *.packages files for Fedora. See for example this patch which switches from yum-utils to dnf-utils: https://gerrit.ovirt.org/c/88630/ -- Barak Korren RHV DevOps team , RHCE, RHCi Red Hat EMEA redhat.com | TRIED. TESTED. TRUSTED. | redhat.com/trusted

1 0

Re: [ovirt-devel] [ovirt-users] Unremovable disks created through the API
by Arik Hadas 07 Mar '18

07 Mar '18

On Tue, Mar 6, 2018 at 11:19 PM, Richard W.M. Jones <rjones(a)redhat.com> wrote: > On Tue, Mar 06, 2018 at 11:14:40PM +0200, Arik Hadas wrote: > > On Tue, Mar 6, 2018 at 9:18 PM, Richard W.M. Jones <rjones(a)redhat.com> > > wrote: > > > > > > > > I've been playing with disk uploads through the API. As a result > > > I now have lots of disks in the states "Paused by System" and > > > "Paused by User". They are not attached to any VM, and I'm logged > > > in as admin@internal, but there seems to be no way to use them. > > > Even worse I've now run out of space so can't do anything else. > > > > > > How can I remove them? > > > > > > > Screenshot: http://oirase.annexia.org/tmp/ovirt.png > > > > > > Hi Richard, > > > > Selecting Upload->Cancel at that tab will remove such a disk. > > Note that it may take a minute or two. > > Yes, that works, thanks. > (Moving to devel-list) BTW, I think that the import process should include a preliminary phase where ovirt-engine is informed that the import process starts. Currently, IIUC, the new process is designed to be: 1. virt-v2v uploads the disks 2. virt-v2v calls an API with the OVF configuration so ovirt-engine will add the VM and attach the uploaded disks to that VM IMHO, the process should be comprised of: 1. virt-v2v calls an API with the (probably partial since the OS and other things are unknown at that point) OVF configuration 2. virt-v2v uploads the disks 3. virt-v2v provides the up-to-date configuration Step #1 will enable ovirt-engine: 1. Most importantly, to cleanup uploaded disks in case of an error during the import process. Otherwise, we require the client to clean them up, which can be challenging (e.g., if the virt-v2v process crashes). 2. To inform the user that the process has started - so he won't get surprised by seeing disks being uploaded suddenly. That will give a context to these upload operations. 3. To inform the user about the progress of the import process, much like we do today when importing VMs from vSphere to RHV. 4. To perform validations on the (partial) VM configuration, e.g., verifying that no VM with the same name exists/verifying there is enough space (optionally mapping different disks to different storage devices) and so on, before uploading the disks. The gaps I see: 1. We don't have a command for step #1 yet but that's something we can provide relatively quickly. We need it also to support uploading an OVA via oVirt's webadmin. 2. We have a command for step #3, but it is not exposed via the API. > > Rich. > > -- > Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~ > rjones > Read my programming and virtualization blog: http://rwmj.wordpress.com > Fedora Windows cross-compiler. Compile Windows programs, test, and > build Windows installers. Over 100 libraries supported. > http://fedoraproject.org/wiki/MinGW >

4 11

planned Jenkins restart
by Evgheni Dereveanchin 07 Mar '18

07 Mar '18

Hi everyone, I'll be performing a planned Jenkins restart within the next hour. No new jobs will be scheduled during this maintenance period. I will inform you once it is over. Regards, Evgheni Dereveanchin

1 1

Fwd: Still Failing: oVirt/ovirt-engine#4888 (master - 1cc377f)
by Sandro Bonazzola 06 Mar '18

06 Mar '18

Hi, not sure who's monitoring Travis failures and maintaining Travis jobs, but looks like we have an error in the test suite It's currently failing on: ------------------------------------------------------- T E S T S ------------------------------------------------------- Running org.ovirt.engine.core.dal.job.ExecutionMessageDirectorTest Tests run: 6, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.234 sec Running org.ovirt.engine.core.dal.dbbroker.DbConnectionUtilTest Tests run: 1, Failures: 1, Errors: 0, Skipped: 0, Time elapsed: 0.936 sec <<< FAILURE! org.ovirt.engine.core.dal.dbbroker.DbConnectionUtilTest Time elapsed: 936 sec <<< FAILURE! java.lang.AssertionError: Unable to init tests Looks pretty much similar to what happens in jenkins for fcraw builds, tracked here: https://bugzilla.redhat.com/show_bug.cgi?id=1550033 ---------- Forwarded message ---------- From: Travis CI <builds(a)travis-ci.org> Date: 2018-03-06 7:53 GMT+01:00 Subject: Still Failing: oVirt/ovirt-engine#4888 (master - 1cc377f) To: sbonazzo(a)redhat.com *oVirt / ovirt-engine <https://travis-ci.org/oVirt/ovirt-engine?utm_source=email&utm_medium=notifi…>* (master <https://github.com/oVirt/ovirt-engine/tree/master>) Build #4888 is still failing. <https://travis-ci.org/oVirt/ovirt-engine/builds/349675802?utm_source=email&…> 4 minutes and 38 seconds *Yedidyah Bar David* 1cc377f <https://github.com/oVirt/ovirt-engine/commit/1cc377fa30286733aeb68aa75a5bc8…> Changeset → <https://github.com/oVirt/ovirt-engine/compare/6c9465241694...1cc377fa3028> packaging: setup: postgres95: Refuse to upgrade if new data dir is not empty Change-Id: I9f69ceb2b8ea773d1bb883c3e81734a3c4c8af3c Bug-Url: https://bugzilla.redhat.com/1546771 Signed-off-by: Yedidyah Bar David <didi(a)redhat.com> *Want to know about upcoming build environment updates?* Would you like to stay up-to-date with the upcoming Travis CI build environment updates? We set up a mailing list for you! Sign up here <http://eepurl.com/9OCsP>. Documentation <https://docs.travis-ci.com> about Travis CI Need help? Mail support <support(a)travis-ci.com>! Choose who receives these build notification emails in your configuration file <https://docs.travis-ci.com/user/notifications>. *Would you like to test your private code?* Travis CI for Private Projects <https://travis-ci.com?utm_source=build_email_footer&utm_campaign=travis-ci.…> could be your new best friend! -- SANDRO BONAZZOLA ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D Red Hat EMEA <https://www.redhat.com/> <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

3 4

Packages not landed on tested repo
by Sandro Bonazzola 06 Mar '18

06 Mar '18

Hi, looks like we have some packages which never passed OST, never landed in ovirt-4.2-snapshot repo and are currently causing failure building the appliance from 4.2 snapshot repo: 03:17:20,893 INFO program:Error: Package: ovirt-engine-4.2.2.3-0.0.master.20180305171049.git0e81394.el7.centos.noarch (ovirt-4.2-snapshot) 03:17:20,893 INFO program:Requires: ovirt-ansible-roles >= 1.1.2 03:17:20,894 INFO program:Error: Package: ovirt-engine-4.2.2.3-0.0.master.20180305171049.git0e81394.el7.centos.noarch (ovirt-4.2-snapshot) 03:17:20,896 INFO program:Requires: ovirt-js-dependencies 03:17:20,897 INFO program:Error: Package: ovirt-engine-4.2.2.3-0.0.master.20180305171049.git0e81394.el7.centos.noarch (ovirt-4.2-snapshot) 03:17:20,897 INFO program:Requires: ovirt-engine-wildfly-overlay >= 11.0.1 03:17:20,899 INFO program:Error: Package: ovirt-engine-api-explorer-0.0.3-0.alpha.1.20180215git9b54c9c.el7.centos.noarch (ovirt-4.2-snapshot) 03:17:20,900 INFO program:Requires: ovirt-js-dependencies >= 1.2 I'm now trying to get the missing packages pass thorough the whole testing pipeline but be aware those packages have already been released 3 months ago so they are stable and manually tested and were passing master OST. I've no clue on why they are missing in the 4.2 testing pipeline. -- SANDRO BONAZZOLA ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D Red Hat EMEA <https://www.redhat.com/> <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

2 1

hosted-engine ovirt-system-tests
by Yedidyah Bar David 05 Mar '18

05 Mar '18

Hi all, Recently I have been pushing various patches to OST in order to verify specific bugs/fixes I was working on, using them with the "manual" jenkins job but with no immediate intention to get them merged. Main reason is that it's not clear what's the best approach to get such tests merged. Do we want a new suite? How often does it run? How long does it take? Do we have enough resources? etc. Do we have plans re this? Bugs/tickets/etc.? Do we want to do something? Specifically, do we want (eventually) many more suites? This seems unmanageable. A few suites, perhaps (also) using lago snapshots? Didn't try that myself, might be useful and relevant. Some examples: https://gerrit.ovirt.org/79203 https://gerrit.ovirt.org/79215 https://gerrit.ovirt.org/84813 https://gerrit.ovirt.org/88201 https://gerrit.ovirt.org/88234 And current one - this and the next ones in the stack: https://gerrit.ovirt.org/88331 Best regards, -- Didi

3 3

[ OST Failure Report ] [ oVirt 4.2 (ovirt-engine) ] [ 05-03-2018 ] [ 006_migrations.migrate_vm ]
by Dafna Ron 05 Mar '18

05 Mar '18

Hi, We have a failure in OST on test 006_migrations.migrate_vm. >From what I can see, the migration succeeded but because there was a KeyError: 'cpuUsage' engine assume the v is down and tries to retry migration. the re-try fails with vm already exists. *Link and headline of suspected patches: *Failed change: *https://gerrit.ovirt.org/#/c/88432/2 <https://gerrit.ovirt.org/#/c/88432/2> - * *engine : Events coming too soon on refresh caps* *CQ reported this as root ca*use but I don't think its related as well: *https://gerrit.ovirt.org/#/c/88404/ <https://gerrit.ovirt.org/#/c/88404/> - * *core: Auto SD selection on template version update* *Link to Job:http://jenkins.ovirt.org/job/ovirt-4.2_change-queue-tester/1021/ <http://jenkins.ovirt.org/job/ovirt-4.2_change-queue-tester/1021/>Link to all logs:http://jenkins.ovirt.org/job/ovirt-4.2_change-queue-tester/1021/artifa… <http://jenkins.ovirt.org/job/ovirt-4.2_change-queue-tester/1021/artifact/>(Relevant) error snippet from the log: <error>* *migration starts and finishs *but fails on vm state on eyError: 'cpuUsage' *2018-03-05 05:21:33,269-0500 INFO (jsonrpc/3) [api.virt] START migrate(params={u'incomingLimit': 2, u'tunneled': u'false', u'dstqemu': u'192.0.3.2', u'autoConverge': u'false', u'src': u'lago-basic-suite-4-2-host-0', u'enableGuestEvents': False, u'dst': u'lago-basic-suite-4-2-host-1:54321', u'vmId': u'a80596a2-f57b-4878-adc3-772363e42783', u'abortOnError': u'true', u'outgoingLimit': 2, u'compressed': u'false', u'method': u'online'}) from=::ffff:192.168.200.2,42452, flow_id=123f5fd3-81a4-4ba9-9034-525674696629, vmId=a80596a2-f57b-4878-adc3-772363e42783 (api:46)2018-03-05 05:21:33,271-0500 INFO (jsonrpc/3) [api.virt] FINISH migrate return={'status': {'message': 'Migration in progress', 'code': 0}, 'progress': 0} from=::ffff:192.168.200.2,42452, flow_id=123f5fd3-81a4-4ba9-9034-525674696629, vmId=a80596a2-f57b-4878-adc3-772363e42783 (api:52)2018-03-05 05:21:33,271-0500 INFO (jsonrpc/3) [jsonrpc.JsonRpcServer] RPC call VM.migrate succeeded in 0.00 seconds (__init__:573)2018-03-05 05:21:33,473-0500 INFO (monitor/bd2f874) [IOProcessClient] Closing client ioprocess-0 (__init__:583)2018-03-05 05:21:34,936-0500 INFO (migsrc/a80596a2) [virt.vm] (vmId='a80596a2-f57b-4878-adc3-772363e42783') Creation of destination VM took: 1 seconds (migration:473)2018-03-05 05:21:34,936-0500 INFO (migsrc/a80596a2) [virt.vm] (vmId='a80596a2-f57b-4878-adc3-772363e42783') starting migration to qemu+tls://lago-basic-suite-4-2-host-1/system with miguri tcp://192.0.3.2 <http://192.0.3.2> (migration:502)2018-03-05 05:21:36,356-0500 INFO (jsonrpc/7) [api.host] START getAllVmStats() from=::ffff:192.168.200.2,42452 (api:46)2018-03-05 05:21:36,359-0500 INFO (jsonrpc/7) [api.host] FINISH getAllVmStats return={'status': {'message': 'Done', 'code': 0}, 'statsList': (suppressed)} from=::ffff:192.168.200.2,42452 (api:52)2018-03-05 05:21:36,361-0500 INFO (jsonrpc/7) [jsonrpc.JsonRpcServer] RPC call Host.getAllVmStats succeeded in 0.00 seconds (__init__:573)2018-03-05 05:21:38,861-0500 INFO (libvirt/events) [virt.vm] (vmId='a80596a2-f57b-4878-adc3-772363e42783') CPU stopped: onSuspend (vm:6063)2018-03-05 05:21:40,109-0500 WARN (periodic/0) [virt.periodic.VmDispatcher] could not run <class 'vdsm.virt.periodic.DriveWatermarkMonitor'> on ['a80596a2-f57b-4878-adc3-772363e42783'] (periodic:323)2018-03-05 05:21:40,109-0500 INFO (migsrc/a80596a2) [virt.vm] (vmId='a80596a2-f57b-4878-adc3-772363e42783') migration took 6 seconds to complete (migration:514)2018-03-05 05:21:40,110-0500 INFO (migsrc/a80596a2) [virt.vm] (vmId='a80596a2-f57b-4878-adc3-772363e42783') Changed state to Down: Migration succeeded (code=4) (vm:1677)2018-03-05 05:21:40,116-0500 INFO (migsrc/a80596a2) [virt.vm] (vmId='a80596a2-f57b-4878-adc3-772363e42783') Stopping connection (guestagent:438)2018-03-05 05:21:41,118-0500 WARN (periodic/3) [virt.periodic.VmDispatcher] could not run <class 'vdsm.virt.periodic.DriveWatermarkMonitor'> on ['a80596a2-f57b-4878-adc3-772363e42783'] (periodic:323)2018-03-05 05:21:42,063-0500 WARN (periodic/2) [virt.vmstats] Missing stat: 'balloon.current' for vm a80596a2-f57b-4878-adc3-772363e42783 (vmstats:552)2018-03-05 05:21:42,064-0500 ERROR (periodic/2) [virt.vmstats] VM metrics collection failed (vmstats:264)Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/vdsm/virt/vmstats.py", line 197, in send_metrics data[prefix + '.cpu.usage'] = stat['cpuUsage']KeyError: 'cpuUsage'* *</error>*

1 0

otopi on PPC (Was: [ACTION REQUIRED] upgrade to Fedora 27 for otopi on master)
by Yedidyah Bar David 04 Mar '18

04 Mar '18

(Changed subject) On Fri, Mar 2, 2018 at 1:17 AM, Eli Mesika <emesika(a)redhat.com> wrote: > I have upgraded to fc27 > I am not able to add a host to a PPC cluster : "no otopi module ..." Where do you get this error? > > otopi is installed On the engine? Host? Both? Generally it's enough to have it on the engine. > > rpm -qa |grep otopi > otopi-java-1.8.0-0.0.master.20180228112959.git6eccc31.fc27.noarch > otopi-common-1.8.0-0.0.master.20180228112959.git6eccc31.fc27.noarch > python2-otopi-devtools-1.8.0-0.0.master.20180228112959.git6eccc31.fc27.noarch > python2-otopi-1.8.0-0.0.master.20180228112959.git6eccc31.fc27.noarch > > Any ideas ? I have no experience with PPC, sorry. But in theory it should work the same, so let's try to debug "as usual". Thanks and best regards, > > > On Wed, Feb 28, 2018 at 7:01 PM, Greg Sheremeta <gshereme(a)redhat.com> wrote: >> >> [changing subject] >> >> Looks like we all have to upgrade Fedora devel machines to Fedora 27. >> >> Greg >> >> On Wed, Feb 28, 2018 at 11:05 AM, Yedidyah Bar David <didi(a)redhat.com> >> wrote: >>> >>> (Adding devel, was asked twice already) >>> >>> On Wed, Feb 28, 2018 at 4:52 PM, Eli Mesika <emesika(a)redhat.com> wrote: >>> > Hi Didi >>> > >>> > I am getting : >>> > >>> > >>> > ***L:ERROR Internal error: type object 'Stages' has no attribute >>> > 'ANSWER_FILE_GENERATED' >>> > Traceback (most recent call last): >>> > File "/usr/lib/python2.7/site-packages/otopi/__main__.py", line 88, >>> > in >>> > main >>> > installer.execute() >>> > File "/usr/lib/python2.7/site-packages/otopi/main.py", line 153, in >>> > execute >>> > sys.exc_info()[2], >>> > File "/usr/lib/python2.7/site-packages/otopi/util.py", line 81, in >>> > raiseExceptionInformation >>> > exec('raise info[1], None, info[2]') >>> > File "/usr/lib/python2.7/site-packages/otopi/main.py", line 147, in >>> > execute >>> > self.context.loadPlugins() >>> > File "/usr/lib/python2.7/site-packages/otopi/context.py", line 859, >>> > in >>> > loadPlugins >>> > self._loadPluginGroups(plugindir, needgroups, loadedgroups) >>> > File "/usr/lib/python2.7/site-packages/otopi/context.py", line 113, >>> > in >>> > _loadPluginGroups >>> > self._loadPlugins(path, path, groupname) >>> > File "/usr/lib/python2.7/site-packages/otopi/context.py", line 70, in >>> > _loadPlugins >>> > self._loadPlugins(base, d, groupname) >>> > File "/usr/lib/python2.7/site-packages/otopi/context.py", line 70, in >>> > _loadPlugins >>> > self._loadPlugins(base, d, groupname) >>> > File "/usr/lib/python2.7/site-packages/otopi/context.py", line 101, >>> > in >>> > _loadPlugins >>> > os.path.basename(path), >>> > File "/usr/lib/python2.7/site-packages/otopi/util.py", line 105, in >>> > loadModule >>> > mod_desc >>> > File >>> > >>> > "/home/emesika/ovirt-engine-1481197/share/ovirt-engine/setup/bin/../plugins/ovirt-engine-common/base/core/__init__.py", >>> > line 24, in <module> >>> > from . import answerfile >>> > File >>> > >>> > "/home/emesika/ovirt-engine-1481197/share/ovirt-engine/setup/bin/../plugins/ovirt-engine-common/base/core/answerfile.py", >>> > line 38, in <module> >>> > class Plugin(plugin.PluginBase): >>> > File >>> > >>> > "/home/emesika/ovirt-engine-1481197/share/ovirt-engine/setup/bin/../plugins/ovirt-engine-common/base/core/answerfile.py", >>> > line 60, in Plugin >>> > otopicons.Stages.ANSWER_FILE_GENERATED, >>> > PluginLoadException: type object 'Stages' has no attribute >>> > 'ANSWER_FILE_GENERATED' >>> > >>> >>> Please update otopi. >>> >>> If you are on fedora, you'll need to upgrade to fc27 first. >>> >>> Good luck, >>> -- >>> Didi >>> _______________________________________________ >>> Devel mailing list >>> Devel(a)ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/devel >> >> > -- Didi

1 0

OST Failure - Weekly update [24/02/2018-02/03/2018]
by Dafna Ron 02 Mar '18

02 Mar '18

Hello, I would like to update on this week's failures and OST current status. We had a failed change that caused other changes to fail: 1. Remove use of end_play and fail module - https://gerrit.ovirt.org/#/c/88250/ date: 27-02-2018 version: master/4.2 test failed: 002_bootstrap.verify_add_hosts fix: reverted until it can be fixed: https://gerrit.ovirt.org/#/c/88327/ bug: https://bugzilla.redhat.com/show_bug.cgi?id=1540260 I re-triggered some of the failed changes that were effected by the above change. However, I am still seeing ovirt-engine project is failing in cq so I am expecting some new issues to appear which would be reported next week. *Below you can see the chart for this week's resolved issues but cause of failure: * Code= regression of working components/functionalities Configurations - package related issues Other = failed build artifacts Infra = infrastructure/OST/Lago related issues <https://gerrit.ovirt.org/#/c/88327/> <https://gerrit.ovirt.org/#/c/88327/> <https://gerrit.ovirt.org/#/c/88327/> *Below is a chart of resolved failures based on ovirt version* *Below is a chart showing failures by suite type: * Thank you, Dafna <https://gerrit.ovirt.org/#/c/88327/>

1 0