- Devel - oVirt List Archives

Re: [ovirt-devel] Broken dependencies: vdsm
by Balamurugan Arumugam 18 Sep '14

18 Sep '14

[Adding vdsm-devel/ovirt-devel] ----- Original Message ----- > From: "Kaleb S. KEITHLEY" <kkeithle(a)redhat.com> > To: "Balamurugan Arumugam" <barumuga(a)redhat.com>, "Dan Kenigsberg" <danken(a)redhat.com> > Cc: "Lalatendu Mohanty" <lmohanty(a)redhat.com>, buildsys(a)fedoraproject.org, "Development discussions related to > Fedora" <devel(a)lists.fedoraproject.org>, glusterfs-owner(a)fedoraproject.org > Sent: Monday, September 15, 2014 9:27:03 PM > Subject: Re: Broken dependencies: vdsm > > Posting to -devel because I can't post to vdsm-owner or virt-maintenance. > > On 09/15/2014 10:09 AM, Kaleb S. KEITHLEY wrote: > > gluster server. AFAIK it's a mistake for vdsm to have these as > > dependencies. > > Correcting myself. glusterfs-cli is okay, and should, AFAIK, be in > RHEL6, although I'm not seeing that it is. > > glusterfs-server is not in RHEL6, and won't ever be in RHEL6, and AFAIK > it's a mistake for vdsm to have it as a dependency. > Looks like to me too. Lets check with vdsm-devel/ovirt-devel? Regards, Bala

2 1

OVIRT-3.5-TEST-DAY-3: replace XML-rpc with JSON-rpc
by Francesco Romani 18 Sep '14

18 Sep '14

Hi everyone of this test day I played with the new JSON-rpc transport, which is enabled by default. I set up from scratch two hypervisors running on RHEL 6.5, while Engine was running on F19. I created everything from scratch and tested all the flows I known good enough, including less-then-common stuff. The list includes creating storage domains, VMs, hotplug/unplug disks, snapshots, migration, hibernation and dehibernation. On top of that, I prepared an environment to run more tests, that included create 200 VMs, started/stopped 100 of them to test. I kept an eye on the logs other than Engine. Everything I tried went OK, and logs look good to me. I run in a few hiccups, which I mention for the sake of completeness: - VDSM refused to start or run VMs initially: libvirt config included relics from past environment on the same box, not JSON-rpc fault. Fixed with new config and (later) a reboot. - Trying recovery, Engine took longer than expected to sync up with VDSM. I have not hard data and feeling is not enough to file a BZ, so I didn't. - Still trying recovery, one and just one time Engine had stale data from VDSM (reported two VMs as present which actually aren't). Not sure it was related to JSON-rpc, can't reproduce, so not filed a BZ. Since I need to continue profiling anyway (better late than never I guess), I include a couple of test to see if JSON-rpc makes any difference to JSON-rpc. Results will be posted on devel(a)ovirt.org and/or on the oVirt wiki. -- Francesco Romani RedHat Engineering Virtualization R & D Phone: 8261328 IRC: fromani

3 5

Testday 3 results
by Doron Fediuck 18 Sep '14

18 Sep '14

Hi All, I was glad to see the amount of participation yesterday. Kudus to everyone who took a part in making oVirt 3.5.0 better! Here are some stats from yesterday's logs: Top 10 active IRC users[1]: 206 Zordrak 177 winfr34k 44 sbonazzo 35 fromani 24 msivak_ 19 Sven 19 jhernand 18 tiraboschi 16 danken 16 capri Bugzilla: 1. Bugs by team: http://goo.gl/RXjm8k 2. Bugs by reporter: http://goo.gl/c89Sdy 3. Results: - 96 new bugs - Top 5 reporters: sbonazzo(a)redhat.com 15 redhat.bugzilla(a)jdmp.org.uk 6 tnisan(a)redhat.com 5 glazarov(a)redhat.com 4 info(a)netbulae.com 4 Please alert if there are any 3.5.0 blockers. Thanks, Doron [1] Excluding the weekly meeting part as it wasn't relevant.

1 0

OVIRT-3.5-TEST-DAY-3: Documentation
by Sandro Bonazzola 17 Sep '14

17 Sep '14

Hi, my assignment for third test day was on Documentation- 3.5 feature pages: Check what's missing and what's wrong the feature documentation looks outdated as far as I've been able to check it. More in detail: http://www.ovirt.org/Features/Gluster_Volume_Capacity test result: failed bug opened: Bug 1142616 - Feature page: Gluster Volume Capacity needs to be updated http://www.ovirt.org/Features/AAA_3.5 test result: failed bug opened: Bug 1142623 - Feature page: AAA 3.5 needs to be updated http://www.ovirt.org/Fence_kdump test result: failed bug opened: Bug 1142628 -Feature page: Fence kdump needs to be updated http://www.ovirt.org/Features/Design/JsonRpc test result: failed bug opened: Bug 1142639 - Feature page: Features/Design/JsonRpc needs to be updated http://www.ovirt.org/Features/AdvancedForemanIntegration test result: failed bug opened: Bug 1142649 - Feature page: AdvancedForemanIntegration needs to be updated http://www.ovirt.org/Features/Design/DetailedHostPMProxyPreferences test result: failed bug opened: Bug 1142652 - Feature page: DetailedHostPMProxyPreferences needs to be updated http://www.ovirt.org/Features/PMHealthCheck and http://www.ovirt.org/Features/Design/DetailedPMHealthCheck test result: failed bug opened: Bug 1142662 - Feature page: PMHealthCheck needs to be updated http://www.ovirt.org/Custom_Fencing test result: failed bug opened: Bug 1142665 - Feature page: Custom Fencing needs to be updated www.ovirt.org/Features/Design/CommandCoordinator test result: failed bug opened: Bug 1142671 - Feature page: CommandCoordinator needs to be updated http://www.ovirt.org/Features/oVirt_Windows_Guest_Tools test result: passed additional notes: maybe a test case explaining how to test the feature will be useful http://www.ovirt.org/Features/Self_Hosted_Engine_iSCSI_Support test result: passed http://www.ovirt.org/Features/Separate-DWH-Host test result: failed bug opened: Bug 1142783 - Feature page: Separate DWH Host needs to be updated http://www.ovirt.org/Features/Separate-Reports-Host test result: passed additional notes: consider creating TestCase page from testing section http://www.ovirt.org/Features/WebSocketProxy_on_a_separate_host test result: passed additional notes: consider creating TestCase page from testing section http://www.ovirt.org/Features/Network_Custom_Properties test result: passed additional notes: consider creating TestCase page from testing section http://www.ovirt.org/Features/NeutronVirtualAppliance test result: passed additional notes: feature is not complete, it should be retargeted to 3.6. additional notes: consider creating TestCase page from testing section http://www.ovirt.org/Features/Node/GenericNodeRegistration test result: failed bug opened: Bug 1142803 - Feature page: Generic Node Registration needs to be updated http://www.ovirt.org/Node_Hosted_Engine test result: failed bug opened: Bug 1142806 - Feature page: Node Hosted Engine needs to be updated http://www.ovirt.org/Feature/oVirtAppliance test result: failed bug opened: Bug 1142814 - Feature page: oVirt Appliance needs to be updated http://www.ovirt.org/Features/CPU_SLA test result: passed additional notes: feature is not complete, it should be retargeted to 3.6. additional notes: please create TestCase page for providing info on how to test the feature http://www.ovirt.org/Features/blkio-support test result: failed bug opened: Bug 1142822 - Feature page: Support blkio SLA features needs to be updated http://www.ovirt.org/Features/Optaplanner test result: passed additional notes: it's a tech preview in 3.5 additional notes: please create TestCase page for providing info on how to test the feature additional notes: please also use feature template: http://www.ovirt.org/Feature_template http://www.ovirt.org/Features/NUMA_and_Virtual_NUMA test result: failed existing bug: Bug 1069303 - OVIRT35 - [RFE] Provide NUMA support in oVirt additional notes: feature is not complete, it should be retargeted to 3.6. additional notes: please create TestCase page for providing info on how to test the feature additional notes: please also use feature template: http://www.ovirt.org/Feature_template http://wiki.ovirt.org/Features/oVirtSchedulerAPI#REST test result: failed bug opened: Bug 1142846 - Feature page: oVirt Scheduler API needs to be updated At this point I have proxy error while connecting to oVirt site, so I think that's all on my side for today testing. -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

2 1

OVIRT-3.5-TEST-DAY-3: backup/restore and disaster recovery
by Simone Tiraboschi 17 Sep '14

17 Sep '14

Hi, today I had to test how to recover a broken system using backup/restore tool [1] or disaster recovery procedure [2]. Unfortunately I really had a lot of troubles just trying to setup my test environment so no good news on that side. I was using two host: one for the engine, the other as an hypervisor. Both with latest fedora 19 updates. For a fault of mine I add oVirt 3.5 RC2 repository on the engine host but I forgot to do the same on the second host and it generates a lot of problems. I installed the ovirt engine, release 3.5 RC2, on the first host and from the web admin UI I was trying to add the second host. I discovered that using jsonrpc mode it doesn't check/enforce or at least advice about cluster compatibility level failing silently. I opened a bug for that [3]. Than I start using xmlrpc mode that suggested me to downgrade the cluster compatibility mode to 3.3; I did that but it still failed adding my host apparently due to SELinux or Gluster errors; I opened a bug also for that [4]. So I understood that I forgot to add oVirt 3.5 repo on the second host; I opened a bug against host-deploy with install rpms but doesn't handle RPM repos. On my opinion it would make the setup more user friendly or at least more controllable for us [5]. So I added the yum repository and I tried again; I noticed that host-deploy upgrades vdsm stuff but it wasn't enough to get 3.5 compatibility level so, investigating it a bit, I noticed that host-deploy upgrades vdsm stuff but completely ignores libvirt one generating a nonworking setup; I opened a bug also for that [6]. At the end, after manually upgrade libvirt rpms I was able to add my host. Than I briefly tested backup/restore and disaster recovery procedures which seam to work as expected. So, at the end, on my opinion we have still to work a bit more to make the setup more user friendly. Simone [1] http://www.ovirt.org/Ovirt-engine-backup [2] http://www.ovirt.org/Features/ImportStorageDomain#Disaster_Recovery_flows [3] https://bugzilla.redhat.com/show_bug.cgi?id=1142945 [4] https://bugzilla.redhat.com/show_bug.cgi?id=1142941 [5] https://bugzilla.redhat.com/show_bug.cgi?id=1142953 [6] https://bugzilla.redhat.com/show_bug.cgi?id=1142959

1 0

[QE][ACTION REQUIRED] oVirt 3.5.0 status
by Sandro Bonazzola 17 Sep '14

17 Sep '14

Hi, We are going to start composing oVirt 3.5.0 GA (or RC3, depending on Test Day results and oVirt Sync Meeting decisions) on Monday 2014-09-22. Maintainers: - Please be sure that 3.5 snapshot satisfy release criteria[9] - Please be sure that no pending patches are going to block the release - If any patch must block the GA release please raise the issue as soon as possible. - If any packages need a rebase please raise the issue as soon as possible. - Be aware that packages that doesn't need a rebase must be re-built with final release versioning from the RC2 tag. The bug tracker [1] shows the following proposed blockers to be reviewed: Bug ID Whiteboard Status Summary 1142256 integration POST engine-setup does not write conf file to allow accessing reports And the following dependencies still open: Bug 1041569 - [NFR] libvirt: Returning the watermark for all the images opened for writing Bug 1102881 - virDomainBlockCommit fails with live snapshots on oVirt block storage The following bugs are keyworded as Regression and not marked as blockers[10] Bug ID Whiteboard Status Summary 1135909 infra POST [Event log] Wrong warning about available swap memory of host [1023MB], when actually host has [1024MB] memory size 1118349 storage NEW [vdsm] Creating DataCenter 3.5 using master domain V1 fails with InquireNotSupportedError 1110444 ux POST bookmark selection does not work on first try 1138314 virt NEW Fail to start vm with payload. Feature freeze is now effective, and branch has been created. All new patches must be backported to 3.5 branch too. Features completed are marked in green on Features Status Table [2] There are still 83 bugs [3] targeted to 3.5.0. Excluding node and documentation bugs we still have 58 bugs [4] targeted to 3.5.0. More in detail [5]: Whiteboard NEW ASSIGNED POST Total docs 14 1 0 15 gluster 9 4 2 15 i18n 0 0 1 1 integration 1 1 1 3 node 6 4 0 10 ppc 2 0 4 6 sla 5 0 8 13 storage 0 0 3 3 virt 12 0 5 17 Total 49 10 24 83 Maintainers / Assignee: - Please ensure that completed features are marked in green on Features Status Table [2] - If you find a blocker bug please remember to add it to the tracker [1] - Please fill release notes, the page has been created here [6] - Please review results from Third Test Day [7] - Please update the target to 3.5.1 or later for bugs that won't be in 3.5.0: it will ease gathering the blocking bugs for next releases. Community: - You're welcome to join us testing next release candidate and getting involved in oVirt Quality Assurance[8] [1] http://bugzilla.redhat.com/1073943 [2] http://goo.gl/4SuYdE [3] http://red.ht/1pVEk7H [4] http://red.ht/1zT2mSq [5] http://red.ht/1q7SqNL [6] http://www.ovirt.org/OVirt_3.5_Release_Notes [7] http://etherpad.ovirt.org/p/3.5-testday-3 [8] http://www.ovirt.org/OVirt_Quality_Assurance [9] http://www.ovirt.org/OVirt_3.5_release-management#Release_Criteria_.28WIP.29 [10] http://goo.gl/uavikG Thanks, -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

5 6

OVIRT-3.5-TEST-DAY-3: CPU SLA for capping
by Juan Hernandez 17 Sep '14

17 Sep '14

Hello, I tested the support for limiting the use of CPU of VMs. Setting it up in the GUI worked correctly, but when starting the VM the settings are ignored. Apparently the reason is a mismatch between the parameters that the engine sends and what VDSM expects: https://bugzilla.redhat.com/1142851 Regards, Juan Hernandez -- Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta 3ºD, 28016 Madrid, Spain Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L.

1 0

Package vdsm-4.13.4-0.el6.x86_64.rpm is not signed again in 3.3.5. repo
by Sven Kieske 17 Sep '14

17 Sep '14

Hi, well the message in the topic already explains what is wrong. This happend already once some days ago and dcaro fixed it, but somehow this occurs again. It would be kind of someone could fix it. Thanks -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH & Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen

1 0

[QE][ACTION NEEDED] oVirt 3.4.4 status
by Sandro Bonazzola 17 Sep '14

17 Sep '14

Hi, We're going to start composing oVirt 3.4.4 GA on *2014-09-23 08:00 UTC* from 3.4 branch. Maintainers: - Please be sure that 3.4 snapshot allow to create VMs before *2014-09-22 15:00 UTC* - Please be sure that no pending patches are going to block the release before *2014-09-22 15:00 UTC* - If any patch must block the GA release please raise the issue as soon as possible. A bug tracker [1] has been opened and shows no open blockers. There are still 6 bugs [2] targeted to 3.4.4. Excluding node and documentation bugs we still have 3 bugs [3] targeted to 3.4.4. Bug ID Whiteboard Status Summary 988341 node NEW Should not create bond when report an error in configuration process 1097735 node NEW "Reboot" button failed to work in progress_page with serial console to install ovirt-node iso. 1023481 node ASSIGNED Sane and working default libvirt config 1059309 sla NEW [events] 'Available memory of host $host (...) under defined threshold...' is logged only once 1127460 storage NEW VM abnormal stop after LV refreshing when using thin provisioning on block storage 1135061 storage POST Require qemu-kvm-rhev on EL to support live snapshots Maintainers / Assignee: - Please add the bugs to the tracker if you think that 3.4.4 should not be released without them fixed. - Please update the target to 3.5.1 or later for bugs that won't be in 3.4.4: it will ease gathering the blocking bugs for next releases. - Please fill release notes, the page has been created here [4] Community: - If you're testing oVirt 3.4 nightly snapshot, please add yourself to the test page [5] [1] http://bugzilla.redhat.com/1118689 [2] http://red.ht/1qwhPXB [3] http://red.ht/1r8jnap [4] http://www.ovirt.org/OVirt_3.4.4_Release_Notes [5] http://www.ovirt.org/Testing/oVirt_3.4.4_Testing -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 0

oVirt Engine Virtual Appliance for 3.5 is ready for testing
by Fabian Deutsch 17 Sep '14

17 Sep '14

Hello! The ready-to-use Engine appliance is now building again and should contain the the latest and greatest 3.5rc2 packages. That appliance can be used for testing hosted engine, as well as testing oVirt Engine 3.5 in general. The ova (intended to be used with hosted engine setup) and the qcow2 (intended to be used for testing) images can be found here: http://jenkins.ovirt.org/view/All/job/ovirt-appliance_master_merged/ All relevant packages are pre-installed, but the appliance still needs to be configured. To configure the appliance you need to run: $ engine-setup --offline --config-append=ovirt-engine-answers inside the appliance after downloading it. Please let us know if you have any issues. Greetings fabian

2 2