- Devel - oVirt List Archives

OST manual suite fails for more than a month
by Tal Nisan 14 Jan '20

14 Jan '20

Ran it myself now on master just to have a baseline [1], it fails with: *17:34:58* # verify_add_all_hosts: ERROR (in 0:20:07) <https://jenkins.ovirt.org/view/oVirt%20system%20tests/job/ovirt-system-test…>*17:34:58* @ Run test: 002_bootstrap.py: ERROR (in 0:27:56) <https://jenkins.ovirt.org/view/oVirt%20system%20tests/job/ovirt-system-test…>*17:34:58* Error occured, aborting Who can have a look? [1] https://jenkins.ovirt.org/view/oVirt%20system%20tests/job/ovirt-system-test…

3 2

[ ERROR ] Failed to execute stage 'Setup validation': Aborted by user
by raymond.francis＠oracle.com 14 Jan '20

14 Jan '20

Not seen this message googling, im the only user too. Not sure whats up here engine-cleanup [ INFO ] Stage: Initializing [ INFO ] Stage: Environment setup Configuration files: ['/etc/ovirt-engine-setup.conf.d/10-packaging-jboss.conf', '/etc/ovirt-engine-setup.conf.d/10-packaging.conf', '/etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf'] Log file: /var/log/ovirt-engine/setup/ovirt-engine-remove-20200113213536-k7u9m1.log Version: otopi-1.8.3 (otopi-1.8.3-1.el7) [ INFO ] Stage: Environment packages setup [ INFO ] Stage: Programs detection [ INFO ] Stage: Environment customization Do you want to remove all components? (Yes, No) [Yes]: --== PRODUCT OPTIONS ==-- [ INFO ] Stage: Setup validation During execution engine service will be stopped (OK, Cancel) [OK]: All the installed ovirt components are about to be removed, data will be lost (OK, Cancel) [Cancel]: [ ERROR ] Failed to execute stage 'Setup validation': Aborted by user [ INFO ] Stage: Clean up Log file is located at /var/log/ovirt-engine/setup/ovirt-engine-remove-20200113213536-k7u9m1.log [ INFO ] Generating answer file '/var/lib/ovirt-engine/setup/answers/20200113213548-cleanup.conf' [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Execution of cleanup failed [root@dub-mgrfarm113 ~]# engine-cleanup [ INFO ] Stage: Initializing [ INFO ] Stage: Environment setup Configuration files: ['/etc/ovirt-engine-setup.conf.d/10-packaging-jboss.conf', '/etc/ovirt-engine-setup.conf.d/10-packaging.conf', '/etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf'] Log file: /var/log/ovirt-engine/setup/ovirt-engine-remove-20200113213556-ao8uv5.log Version: otopi-1.8.3 (otopi-1.8.3-1.el7) [ INFO ] Stage: Environment packages setup [ INFO ] Stage: Programs detection [ INFO ] Stage: Environment customization Do you want to remove all components? (Yes, No) [Yes]: --== PRODUCT OPTIONS ==-- [ INFO ] Stage: Setup validation During execution engine service will be stopped (OK, Cancel) [OK]: All the installed ovirt components are about to be removed, data will be lost (OK, Cancel) [Cancel]: [ ERROR ] Failed to execute stage 'Setup validation': Aborted by user [ INFO ] Stage: Clean up Log file is located at /var/log/ovirt-engine/setup/ovirt-engine-remove-20200113213556-ao8uv5.log [ INFO ] Generating answer file '/var/lib/ovirt-engine/setup/answers/20200113213601-cleanup.conf' [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Execution of cleanup failed

2 1

OST: Is it still possible to run it without mock?
by Milan Zamazal 13 Jan '20

13 Jan '20

Hi, when trying to run basic-suite-master using run_suite.sh on my machine, I get the following error: /home/pdm/ovirt-system-tests/run_suite.sh: line 532: /var/lib/ci_toolbox/safe_download.sh: No such file or directory ci_toolbox/safe_download.sh is in Jenkins repo -- is mock now required to run OST now or is it just a mistake (either in OST or on my side)? Thanks, Milan

2 4

Cannot delete disk despite all disk permissions given to user
by raymond.francis＠oracle.com 13 Jan '20

13 Jan '20

Possible bug i found in testing (or could be my own understanding). If i give a user the the following capabiities, wouldnt it stand to reason that he can then delete a disk? StorageAdmin DiskCreator DiskProfileUser SuperUser DiskOperator I get a permissions issue if i then try to delete a disk. Let me know if any logs etc needed. Thanks Raymond

1 1

openstack glace images credentials
by Dana Elfassy 12 Jan '20

12 Jan '20

Hi, I'm trying to get the credentials for several images on ovirt-image-repository (OpenStack Glance) on storage domains in the webadmin Who can help me with this? Thanks, Dana

3 3

oVirt and Gluster Hyperconverged - VM's Bad volume specification
by thomas.rockey＠datasphere.com 09 Jan '20

09 Jan '20

I am new to this forum so I apologize before hand if I don’t present the right content you are looking for or miss content you need. Background: By no means am I an expert with Ovirt and glusterfs. That said I have been using, managing, building out Ovirt (single hosts) and oVirt with Gluster Hyperconverged environments for 5 years or more. I started building out Ovirt environments with oVirt Engine Version: 3.6.7.5-1.el6 and earlier and now I’m using the latest oVirt with Gluster Hyperconverged. Current hardware and software layout: For the last 8 months I have been using a oVirt with Gluster Hyperconverged to host in total about 100 VM’s. My hardware layout in one environment is 5 Dell R410 3 of them configured with Gluster Hyperconverged and the other 2 are just added hosts. Below is a detailed list! Manufacturer: Dell Inc. PowerEdge R410 CPU Model Name: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz CPU Cores per Socket: 4 CPU Type: Intel Westmere IBRS SSBD Family Dell PERC H700 4 SAS Seagate 4 TB drives 7.2k 2 one gig links – NIC 1 for frontend and NIC 2 for gluster backend My software layout is: OS Version: RHEL - 7 - 7.1908.0.el7.centos OS Description: CentOS Linux 7 (Core) Kernel Version: 3.10.0 - 1062.9.1.el7.x86_64 KVM Version: 2.12.0 - 33.1.el7_7.4 LIBVIRT Version: libvirt-4.5.0-23.el7_7.3 VDSM Version: vdsm-4.30.38-1.el7 SPICE Version: 0.14.0 - 7.el7 GlusterFS Version: glusterfs-6.6-1.el7 CEPH Version: librbd1-10.2.5-4.el7 Open vSwitch Version: openvswitch-2.11.0-4.el7 Kernel Features: PTI: 1, IBRS: 0, RETP: 1, SSBD: 3 VNC Encryption: Disabled My network layout is: 3 HP 3800-48G-4SFP+ Switch (J9576A) running FULL MESH Issue/timeline: • All 3 of the HP 3800 were rebooted at the same time and were down for 5 to 10 seconds before they came back up (meaning pingable and responsive). • A little more than 85% (36 or so) of the VM’s I had running all went into a pause state, do to and unknow storage error. • The gluster volume heal state went all the way up to 2300 on vmstore (OS data location) • After heal completed on the vmstore (took about an hour) 85% of the VM’s failed to launch with an error (see below). VM broadsort is down with error. Exit message: Bad volume specification {'protocol': 'gluster', 'address': {'function': '0x0', 'bus': '0x00', 'domain': '0x0000', 'type': 'pci', 'slot': '0x06'}, 'serial': 'b1bf3f56-a453-4383-a350-288bee06445b', 'index': 0, 'iface': 'virtio', 'apparentsize': '274877906944', 'specParams': {}, 'cache': 'none', 'imageID': 'b1bf3f56-a453-4383-a350-288bee06445b', 'truesize': '106767498240', 'type': 'disk', 'domainID': 'a7119613-a5ba-4a97-802b-0a985c647381', 'reqsize': '0', 'format': 'raw', 'poolID': '699fd2d6-c461-11e9-8b83-00163e18a045', 'device': 'disk', 'path': 'vmstore/a7119613-a5ba-4a97-802b-0a985c647381/images/b1bf3f56-a453-4383-a350-288bee06445b/25b0ab77-8f4c-42a1-9416-27db4cd25b39', 'propagateErrors': 'off', 'name': 'vda', 'bootOrder': '1', 'volumeID': '25b0ab77-8f4c-42a1-9416-27db4cd25b39', 'diskType': 'network', 'alias': 'ua-b1bf3f56-a453-4383-a350-288bee06445b', 'hosts': [{'name': 'glust01.mydomain.local', 'port': '0'}], 'discard': False}. Everyone of the VM’s had this same error and I had to find backups and old images to bring them back online. I deleted some of the corrupted VM’s that I had current images of, to get them back up. You shouldn’t be afraid to reboot 1, 2, 3, or even all of your switches at once because of a human error, power outage, or a simple update. Then have to worry about your VM’s getting corrupted because of this concerns me greatly. I am now thinking that I didn't setup oVirt with Gluster Hyperconverged correctly because of this issue. Have I missed something in the documentation or network layout/setup that would prevent this from happening again? I have searched the web for a few days now trying to find threads related to my situation with no luck. I want to thank you for your time and it is greatly appreciated!

1 0

oVirt and Gluster Hyperconverged - VM's Bad volume specification
by thomas.rockey＠datasphere.com 09 Jan '20

09 Jan '20

I am new to this forum so I apologize before hand if I don’t present right content correctly or miss the content you need. Background: By no means am I an expert with Ovirt and glusterfs. That said I have been using, managing, building out Ovirt (single hosts) and oVirt with Gluster Hyperconverged environments for 5 years or more. I started building out Ovirt environments with oVirt Engine Version: 3.6.7.5-1.el6 and earlier and now I’m using the latest oVirt with Gluster Hyperconverged. Current hardware and software layout: For the last 8 months I have been using a oVirt with Gluster Hyperconverged to host in total about 100 VM’s. My hardware layout in one environment is 5 Dell R410 3 of them configured with Gluster Hyperconverged and the other 2 are just added hosts. Below is a detailed list! Manufacturer: Dell Inc. PowerEdge R410 CPU Model Name: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz CPU Cores per Socket: 4 CPU Type: Intel Westmere IBRS SSBD Family Dell PERC H700 4 SAS Seagate 4 TB drives 7.2k 2 one gig links – NIC 1 for frontend and NIC 2 for gluster backend My software layout is: OS Version: RHEL - 7 - 7.1908.0.el7.centos OS Description: CentOS Linux 7 (Core) Kernel Version: 3.10.0 - 1062.9.1.el7.x86_64 KVM Version: 2.12.0 - 33.1.el7_7.4 LIBVIRT Version: libvirt-4.5.0-23.el7_7.3 VDSM Version: vdsm-4.30.38-1.el7 SPICE Version: 0.14.0 - 7.el7 GlusterFS Version: glusterfs-6.6-1.el7 CEPH Version: librbd1-10.2.5-4.el7 Open vSwitch Version: openvswitch-2.11.0-4.el7 Kernel Features: PTI: 1, IBRS: 0, RETP: 1, SSBD: 3 VNC Encryption: Disabled My network layout is: 3 HP 3800-48G-4SFP+ Switch (J9576A) running FULL MESH Issue/timeline: • All 3 of the HP 3800 were rebooted at the same time and were down for 5 to 10 seconds before they came back up (meaning pingable and responsive). • A little more than 85% (36 or so) of the VM’s I had running all went into a pause state, do to and unknow storage error. • The gluster volume heal state went all the way up to 2300 on vmstore (OS data location) • After heal completed on the vmstore (took about an hour) 85% of the VM’s failed to launch with an error (see below). VM broadsort is down with error. Exit message: Bad volume specification {'protocol': 'gluster', 'address': {'function': '0x0', 'bus': '0x00', 'domain': '0x0000', 'type': 'pci', 'slot': '0x06'}, 'serial': 'b1bf3f56-a453-4383-a350-288bee06445b', 'index': 0, 'iface': 'virtio', 'apparentsize': '274877906944', 'specParams': {}, 'cache': 'none', 'imageID': 'b1bf3f56-a453-4383-a350-288bee06445b', 'truesize': '106767498240', 'type': 'disk', 'domainID': 'a7119613-a5ba-4a97-802b-0a985c647381', 'reqsize': '0', 'format': 'raw', 'poolID': '699fd2d6-c461-11e9-8b83-00163e18a045', 'device': 'disk', 'path': 'vmstore/a7119613-a5ba-4a97-802b-0a985c647381/images/b1bf3f56-a453-4383-a350-288bee06445b/25b0ab77-8f4c-42a1-9416-27db4cd25b39', 'propagateErrors': 'off', 'name': 'vda', 'bootOrder': '1', 'volumeID': '25b0ab77-8f4c-42a1-9416-27db4cd25b39', 'diskType': 'network', 'alias': 'ua-b1bf3f56-a453-4383-a350-288bee06445b', 'hosts': [{'name': 'glust01.mydomain.local', 'port': '0'}], 'discard': False}. Everyone of the VM’s had this same error and I had to find backups and old images to bring them back online. I deleted some of the VM’s that I had current images of to get them back up. You shouldn’t be afraid to reboot 1, 2, 3, or even all of your switches at once because of a human error, power outage, or a simple update. Then have to worry about your VM’s getting corrupted because of this concerns me greatly that I didn’t setup oVirt with Gluster Hyperconverged correctly. Have I missed something in the documentation or network layout that would prevent this for happing? I want to thank you for your time and it is greatly appreciated!

1 0

Failed to add host using ansible runner
by Eyal Shenitzky 09 Jan '20

09 Jan '20

Hi, I am failing to add a new host to my env with the following message: 2019-12-25 10:57:17,587+02 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (EE-ManagedThreadFactory-engine-Thread-63) [41ec72c1-88e2-402b-8bb9-f38c678d0bf0] EVENT_ID: VDS_INSTALL_FAILED(505), Host 10.35.0.158 installation failed. Failed to execute Ansible host-deploy role: null. Please check logs for more details: /home/engine/ovirt-engine/var/log/ovirt-engine/host-deploy/ovirt-host-deploy-ansible-20191225105714-10.35.0.158-41ec72c1-88e2-402b-8bb9-f38c678d0bf0.log. The host is Fedora-30 Ansible version is - 2.9.1 Ansible runner version - 1.3.4 /etc/ansible-runner-service/config.yaml: --- version: 1 target_user: root playbooks_root_dir: '/home/engine/ovirt-engine/share/ovirt-engine/ansible-runner-service-project' ssh_private_key: '/home/engine/ovirt-engine/etc/pki/ovirt-engine/keys/engine_id_rsa' port: 50001 target_user: root There are no logs at all at the specified location in the error message. Did someone encounter that issue? Thanks, -- Regards, Eyal Shenitzky

6 13

New dependency for development environment
by Ondra Machacek 09 Jan '20

09 Jan '20

Hello, we are going to merge a series of patches to master branch, which integrates ansible-runner with oVirt engine. When the patches will be merged you will need to install new package called ansible-runner- service-dev, and follow instructions so your dev-env will keep working smoothly(all relevant info will be also in README.adoc): 1) sudo dnf update ovirt-release-master 2) sudo dnf install -y ansible-runner-service-dev 3) Edit `/etc/ansible-runner-service/config.yaml` file as follows: --- playbooks_root_dir: '$PREFIX/share/ovirt-engine/ansible-runner-service-project' ssh_private_key: '$PREFIX/etc/pki/ovirt-engine/keys/engine_id_rsa' port: 50001 target_user: root Where `$PREFIX` is the prefix of your development environment prefix, which you've specified during the compilation of the engine. 4) Restart and enable ansible-runner-service: # systemctl restart ansible-runner-service # systemctl enable ansible-runner-service That's it, your dev-env should start using the ansible-runner-service for host-deployment etc. Please note that only Fedora 30/31 and Centos7 was packaged, and are natively supported! Thanks, Ondra

9 24

Failed to install ovirt-imageio-proxy for fc30
by Shani Leviim 08 Jan '20

08 Jan '20

Hi All, I ran into a dependencies issue while trying to install imageio over fc30. I currently have a ovirt-imageio-common-1.6.2-0.202001051603.git77cf282.fc30.x86_64 but when I'm trying to install ovirt-imageio-proxy, I'm getting the following error: Error: Problem: conflicting requests - nothing provides ovirt-imageio-common = 1.5.0 needed by ovirt-imageio-proxy-1.5.0-0.201812112104.gitf7d8234.fc30.noarch I've also noticed that the available version in the repository for fc30 is ovirt-imageio-proxy-1.5.0 [1] While version 1.6.2 is available for rhel7 [2]. Please assist. [1] https://resources.ovirt.org/pub/ovirt-master-snapshot/rpm/fc30/noarch/ovirt… [2] https://resources.ovirt.org/pub/ovirt-master-snapshot/rpm/el7/noarch/ovirt-… *Regards,* *Shani Leviim*

2 2