May 2012 - Users - oVirt List Archives

[Users] Shut down a host node through web UI?
by Justin Clift 09 May '12

09 May '12

Hi all, Successfully set up a basic initial oVirt installation (Engine + 1 x host node running 2.3.0-1.fc16 stable). No storage nor VM's configured yet. The host has been activated fine through the Engine web UI. Now looking how gracefully shut down the node through the web UI. There's nothing obvious for this (i.e. "shut down" option) showing up in the web UI for me. (admin user) What should I be looking for in the UI, to shut down hosts gracefully? Note - putting the host in maintenance mode and bringing it back out again goes fine, so I don't *think* it's a config problem. ? Regards and best wishes, Justin Clift -- Aeolus Community Manager http://www.aeolusproject.org

2 3

[Users] Help: Fatal error during migration
by Gmail 08 May '12

08 May '12

hello，dears： i have a ovirt-engine with two node 172.30.0.229 ovirt-engine.local 172.30.0.231 ovirt-node-1.local 172.30.0.232 ovirt-node-2.local When i use the live migration ，migrate a vm from node2 to node1 , it failed with the error code 12 && error msg 'Fatal error during migration' , I don't know why , could anybody help me ? thanks Detail log as bellow : tail -f /var/log/ovirt-engine/engine.log 2012-04-25 22:59:52,744 INFO [org.ovirt.engine.core.bll.VdsSelector] (http--0.0.0.0-8080-16) Checking for a specific VDS only - id:ae567034-5d8e-11e1-bdc9-a7168ad4d39f, name:ovirt-node-1.local, host_name(ip):172.30.0.231 2012-04-25 22:59:52,745 INFO [org.ovirt.engine.core.bll.MigrateVmToServerCommand] (pool-5-thread-46) Running command: MigrateVmToServerCommand internal: false. Entities affected : ID: f73f17a8-a418-4318-af0e-2cea18ab597a Type: VM 2012-04-25 22:59:52,748 INFO [org.ovirt.engine.core.bll.VdsSelector] (pool-5-thread-46) Checking for a specific VDS only - id:ae567034-5d8e-11e1-bdc9-a7168ad4d39f, name:ovirt-node-1.local, host_name(ip):172.30.0.231 2012-04-25 22:59:52,754 INFO [org.ovirt.engine.core.vdsbroker.MigrateVDSCommand] (pool-5-thread-46) START, MigrateVDSCommand(vdsId = bcee74d4-5d8e-11e1-a03e-8bc4768fc531, vmId=f73f17a8-a418-4318-af0e-2cea18ab597a, srcHost=172.30.0.232, dstVdsId=ae567034-5d8e-11e1-bdc9-a7168ad4d39f, dstHost=172.30.0.231:54321, migrationMethod=ONLINE), log id: 444b3006 2012-04-25 22:59:52,757 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateBrokerVDSCommand] (pool-5-thread-46) VdsBroker::migrate::Entered (vm_guid=f73f17a8-a418-4318-af0e-2cea18ab597a, srcHost=172.30.0.232, dstHost=172.30.0.231:54321, method=online 2012-04-25 22:59:52,757 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateBrokerVDSCommand] (pool-5-thread-46) START, MigrateBrokerVDSCommand(vdsId = bcee74d4-5d8e-11e1-a03e-8bc4768fc531, vmId=f73f17a8-a418-4318-af0e-2cea18ab597a, srcHost=172.30.0.232, dstVdsId=ae567034-5d8e-11e1-bdc9-a7168ad4d39f, dstHost=172.30.0.231:54321, migrationMethod=ONLINE), log id: 2a26d38e 2012-04-25 22:59:52,778 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateBrokerVDSCommand] (pool-5-thread-46) FINISH, MigrateBrokerVDSCommand, log id: 2a26d38e 2012-04-25 22:59:52,817 INFO [org.ovirt.engine.core.vdsbroker.MigrateVDSCommand] (pool-5-thread-46) FINISH, MigrateVDSCommand, return: MigratingFrom, log id: 444b3006 2012-04-25 22:59:53,281 ERROR [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (QuartzScheduler_Worker-40) Rerun vm f73f17a8-a418-4318-af0e-2cea18ab597a. Called from vds ovirt-node-2.local 2012-04-25 22:59:53,286 INFO [org.ovirt.engine.core.vdsbroker.UpdateVdsDynamicDataVDSCommand] (pool-5-thread-46) START, UpdateVdsDynamicDataVDSCommand(vdsId = ae567034-5d8e-11e1-bdc9-a7168ad4d39f, vdsDynamic=org.ovirt.engine.core.common.businessentities.VdsDynamic@34c39cde), log id: 4c2ed94e 2012-04-25 22:59:53,299 INFO [org.ovirt.engine.core.vdsbroker.UpdateVdsDynamicDataVDSCommand] (pool-5-thread-46) FINISH, UpdateVdsDynamicDataVDSCommand, log id: 4c2ed94e 2012-04-25 22:59:53,304 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateStatusVDSCommand] (pool-5-thread-46) START, MigrateStatusVDSCommand(vdsId = bcee74d4-5d8e-11e1-a03e-8bc4768fc531, vmId=f73f17a8-a418-4318-af0e-2cea18ab597a), log id: 69d2528 2012-04-25 22:59:53,320 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase] (pool-5-thread-46) Failed in MigrateStatusVDS method 2012-04-25 22:59:53,320 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase] (pool-5-thread-46) Error code migrateErr and error message VDSGenericException: VDSErrorException: Failed to MigrateStatusVDS, error = Fatal error during migration 2012-04-25 22:59:53,321 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase] (pool-5-thread-46) Command org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateStatusVDSCommand return value Class Name: org.ovirt.engine.core.vdsbroker.vdsbroker.StatusOnlyReturnForXmlRpc mStatus Class Name: org.ovirt.engine.core.vdsbroker.vdsbroker.StatusForXmlRpc mCode 12 mMessage Fatal error during migration 2012-04-25 22:59:53,321 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase] (pool-5-thread-46) Vds: ovirt-node-2.local 2012-04-25 22:59:53,321 ERROR [org.ovirt.engine.core.vdsbroker.VDSCommandBase] (pool-5-thread-46) Command MigrateStatusVDS execution failed. Exception: VDSErrorException: VDSGenericException: VDSErrorException: Failed to MigrateStatusVDS, error = Fatal error during migration 2012-04-25 22:59:53,321 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateStatusVDSCommand] (pool-5-thread-46) FINISH, MigrateStatusVDSCommand, log id: 69d2528

3 3

[Users] VM ip not being shown up in the manager
by Rahul Upadhyaya 08 May '12

08 May '12

Hi, In my ovirt setup. The vms are getting IPs properly (inside console ifconfig shows ip) but the web-management console is not displaying it. The IP adress field for the VM is empty. My guest OS is fedora. I have installed ovirt-guest-agent also over my guest OS. Is it a known bug or something that I could have missed that the IP address is not being displayed? -- Regards, Rahul =======================================================

2 1

[Users] Call For Agenda Items 2012-05-09 meeting
by Mike Burns 08 May '12

08 May '12

Any agenda items for this week? Current Agenda: * Status of Next Release * Sub-project reports (engine, vdsm, node) * Review decision on Java 7 and Fedora jboss rpms in oVirt Engine * Upcoming workshops Thanks Mike

1 0

Re: [Users] Adding oVirt Node Fails
by Doron Fediuck 08 May '12

08 May '12

Nicholas, The code I saw is testing for this file to verify it's a nods platform, and if it's missing the behaviour changes. So the code will try to unlink the file, which will give you this result in a mounted file. Sent from my Android phone. Please ignore typos. -----Original Message----- From: Nicholas Kesick [cybertimber2000(a)hotmail.com] Received: Tuesday, 08 May 2012, 0:08 To: mburns(a)redhat.com, abaron(a)redhat.com CC: oVirt Mailing List [users(a)ovirt.org] Subject: Re: [Users] Adding oVirt Node Fails Ayal, did you see something in the code that made you want me to try the sym-link to /etc/rhev-hypervisor-release?Mike, is there any harm in linking it? - Nick > Subject: Re: [Users] Adding oVirt Node Fails > From: mburns(a)redhat.com > To: abaron(a)redhat.com > CC: cybertimber2000(a)hotmail.com; users(a)ovirt.org > Date: Sun, 6 May 2012 21:26:08 -0400 > > On Sat, 2012-05-05 at 16:39 -0400, Ayal Baron wrote: > > > > ----- Original Message ----- > > > > > > > > > > Date: Sat, 5 May 2012 12:29:20 +0300 > > > > From: dfediuck(a)redhat.com > > > > To: cybertimber2000(a)hotmail.com > > > > CC: mburns(a)redhat.com; users(a)ovirt.org > > > > Subject: Re: [Users] Adding oVirt Node Fails > > > > > > > > On 04/05/12 02:49, Nicholas Kesick wrote: > > > > > Fri, 27 Apr 2012 05:22:24 DEBUG instCert: try to delete old > > > > > certificates > > > > > Fri, 27 Apr 2012 05:22:24 DEBUG instCert: failed. > > > > > Traceback (most recent call last): > > > > > File "/usr/share/vdsm-reg/deployUtil.py", line 1133, in instCert > > > > > File "/usr/share/vdsm-reg/deployUtil.py", line 1098, in > > > > > pkiCleanup > > > > > OSError: [Errno 16] Device or resource busy: > > > > > '/etc/pki/vdsm/certs/cacert.pem' > > > > > > > > > > > > Nicholas, > > > > I think I got it; > > > > Please check if this file exists: '/etc/rhev-hypervisor-release'. > > > > If not, try to create a sym-link in this name to > > > > /etc/system-release, > > > > and restart vdsm-reg service. > > No, /etc/rhev-hypervisor-release should not exist. It doesn't have to. > We went through significant effort before the 3.0 release making sure > that vdsm used /etc/ovirt-node-image-release for determining if the > machine is ovirt-node based or not. > > There should not be any need for anything that says "rhev" in > ovirt-node. > > Mike > > > > > > > > > Also please provide the rpm information for vdsm-reg and vdsm as > > > > well. > > > > -- > > > > > > > > /d > > > > > > > > "Common sense is not so common." --Voltaire, Dictionnaire > > > > Philosophique (1764) > > > > > > Just to make sure I do it right, can you specify which you wanted > > > done on the node, and which you wanted on the manager? I have the > > > feeling you wanted it all done on the node. > > > > you are correct, all on node. > > > > > > > > > > > > > > _______________________________________________ > > > Users mailing list > > > Users(a)ovirt.org > > > http://lists.ovirt.org/mailman/listinfo/users > > > > > _______________________________________________ > > Users mailing list > > Users(a)ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > > Sent from my Android phone. Please ignore typos.

2 5

[Users] Missing CPU features : CpuFlags
by Barry Kostjens 08 May '12

08 May '12

Hello, I'm trying to add a ovirt node (using the ovirt node image) to ovirt-engine however, im getting: Host ovirt-node1 moved to Non-Operational state as host does not meet the cluster's minimum CPU level. Missing CPU features : CpuFlags These are my cpuflags, virtualisation is supported: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc pebs bts nopl pni dtes64 monitor ds_cpl vmx est cid cx16 xtpr pdcm lahf_lm tpr_shadow I guess the CPU is pre-conroe, how can I add this to virt engine? Im running ovirt-enige on Fedora 16, and the node is using ovirt node, both from http://www.ovirt.org/get-ovirt/ Complete /proc/cpuinfo output: processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 6 model name : Intel(R) Xeon(TM) CPU 3.00GHz stepping : 4 microcode : 0x2 cpu MHz : 2992.569 cache size : 2048 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 6 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc pebs bts nopl pni dtes64 monitor ds_cpl vmx est cid cx16 xtpr pdcm lahf_lm tpr_shadow bogomips : 5985.13 clflush size : 64 cache_alignment : 128 address sizes : 36 bits physical, 48 bits virtual Thanks, Barry.

2 8

Re: [Users] Adding oVirt Node Fails
by Nicholas Kesick 07 May '12

07 May '12

--_0e63f315-464d-4352-a4db-088ce04c621b_ Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable It's called "breth0". I've been tempted to rename it manually=2C but my und= erstanding is that it's not persistant. Worth testing though.dougsland=2C j= boggs said you may know something about this being a bug in the stable vers= ion and is fixed in nightlies? Date: Mon=2C 30 Apr 2012 21:56:16 -0400 Subject: Re: [Users] Adding oVirt Node Fails From: virtuallymad(a)gmail.com To: cybertimber2000(a)hotmail.com I would go to /etc/sysconfig/network-scripts/ and see what your bridge is c= alled on both machines. They should both be ifcfg-ovirtmgmt I believe. On Mon=2C Apr 30=2C 2012 at 5:58 PM=2C Nicholas Kesick <cybertimber2000@hot= mail.com> wrote: I'm having trouble adding a oVirt Node to the oVirt Manager. The node is powered by the oVirt Node 2.3.0 image (installed to local stora= ge). The engine is powered by Fedora 16 + oVirt-engine package from YUM. =20 When I add the host=2C install goes ok=2C and when I go to activate it ever= ything goes ok until near step 2. =20 Step: Install RHEV_INSTALL completes Step: instCert fails Then it says (in events) that the host was installed successfully=2C while = the manager says "Install Failed". =20 Looking at the logs on the node=2C VDSM Registration Log seems to imply it = can't rename the bridge. =20 Anyone have any advice? =20 Thanks=2C - Nick =20 _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users --=20 Gary Scarborough IST Lab Manager Rochester Institute of Technology Rochester NY = --_0e63f315-464d-4352-a4db-088ce04c621b_ Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <html> <head> <style></style></head> <body class=3D'hmmessage'><div dir=3D'ltr'> It's called "breth0". I've been tempted to rename it manually=2C but my und= erstanding is that it's not persistant. Worth testing though.<BR>dougsland= =2C jboggs said you may know something about this being a bug in the stable= version and is fixed in nightlies?<br><BR><div><div id=3D"SkyDrivePlacehol= der"></div><hr id=3D"stopSpelling">Date: Mon=2C 30 Apr 2012 21:56:16 -0400<= br>Subject: Re: [Users] Adding oVirt Node Fails<br>From: virtuallymad@gmail= .com<br>To: cybertimber2000(a)hotmail.com<br><br>I would go to /etc/sysconfig= /network-scripts/ and see what your bridge is called on both machines.&nbsp= =3B They should both be ifcfg-ovirtmgmt I believe.<br><br><div class=3D"ecx= gmail_quote">On Mon=2C Apr 30=2C 2012 at 5:58 PM=2C Nicholas Kesick <span d= ir=3D"ltr">&lt=3B<a href=3D"mailto:cybertimber2000@hotmail.com">cybertimber= 2000(a)hotmail.com</a>&gt=3B</span> wrote:<br> <blockquote style=3D"padding-left: 1ex=3B border-left-color: rgb(204=2C 204= =2C 204)=3B border-left-width: 1px=3B border-left-style: solid=3B" class=3D= "ecxgmail_quote"> <div><div dir=3D"ltr"> I'm having trouble adding a oVirt Node to the oVirt Manager.<br>The node is= powered by the oVirt Node 2.3.0 image (installed to local storage).<br>The= engine is powered by Fedora 16 + oVirt-engine package from YUM.<br> &nbsp=3B<br>When I add the host=2C install goes ok=2C and when I go to acti= vate it everything goes ok until near step 2.&nbsp=3B <br>Step: Install RHE= V_INSTALL completes<br>Step: instCert fails<br>Then it says (in events) tha= t the host was installed successfully=2C while the manager says "Install Fa= iled".<br> &nbsp=3B<br>Looking at the logs on the node=2C VDSM Registration Log seems = to imply it can't rename the bridge.<br>&nbsp=3B<br>Anyone have any advice?= <br>&nbsp=3B<br>Thanks=2C<br>- Nick<br> </div></div> <br>_______________________________________________<br> Users mailing list<br> <a href=3D"mailto:Users@ovirt.org">Users(a)ovirt.org</a><br> <a href=3D"http://lists.ovirt.org/mailman/listinfo/users" target=3D"_blank"= >http://lists.ovirt.org/mailman/listinfo/users</a><br> <br></blockquote></div><br><br clear=3D"all"><br>-- <br>Gary Scarborough<br= > IST Lab Manager<br> Rochester Institute of Technology<br> Rochester NY<br></div> </div></body> </html>= --_0e63f315-464d-4352-a4db-088ce04c621b_--

6 15

[Users] Host missing cpuFlags
by Nicholas Kesick 07 May '12

07 May '12

--_e6d27358-1a59-4af7-bbac-9b1f808c4a94_ Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable I managed to get a host successfully added into oVirt Manager (Fedora16 min= imum install=2C then used the wiki RPM install method)=2C but the last even= t reports "Host <hostname> moved to Non-operational state as host does not = meet the cluster's minimum CPU level. Missing CPU features: CpuFlags" Can a= nyone shine some light on the problem? The CPU does support virtualization.= .. and as far as I can tell from cat /proc/cpuinfo does does have cpu flags= .flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca= cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx = lm constant_tsc pebs bts nopl pni dtes64 monitor ds_cpl vmx est cid cx16 xt= pr pdcm lahf_lm tpr_shadow Many thanks- Nick = --_e6d27358-1a59-4af7-bbac-9b1f808c4a94_ Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <html> <head> <style></style></head> <body class=3D'hmmessage'><div dir=3D'ltr'> I managed to get a host successfully added into oVirt Manager (Fedora16 min= imum install=2C then used the wiki RPM install method)=2C but the last even= t reports "Host &lt=3Bhostname&gt=3B moved to Non-operational state as host= does not meet the cluster's minimum CPU level. Missing CPU features: CpuFl= ags"<BR>&nbsp=3B<BR>Can anyone shine some light on the problem?&nbsp=3BThe = CPU does support virtualization... and as far as I can tell from cat /proc/= cpuinfo does does have cpu flags.<BR>flags&nbsp=3B&nbsp=3B&nbsp=3B&nbsp=3B&= nbsp=3B&nbsp=3B&nbsp=3B&nbsp=3B&nbsp=3B&nbsp=3B : fpu vme de pse tsc msr <s= trong>pae</strong> mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts= acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc pebs bts no= pl pni dtes64 monitor ds_cpl <strong>vmx</strong> est cid cx16 xtpr pdcm la= hf_lm tpr_shadow<br><BR>Many thanks<BR>- Nick<BR> </div></body> </html>= --_e6d27358-1a59-4af7-bbac-9b1f808c4a94_--

5 10

[Users] Missing CPU features : CpuFlags
by Barry Kostjens 07 May '12

07 May '12

Hello, I'm trying to add a ovirt node (using the ovirt node image) to ovirt-engine however, im getting: Host ovirt-node1 moved to Non-Operational state as host does not meet the cluster's minimum CPU level. Missing CPU features : CpuFlags These are my cpuflags, virtualisation is supported: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc pebs bts nopl pni dtes64 monitor ds_cpl vmx est cid cx16 xtpr pdcm lahf_lm tpr_shadow I guess the CPU is pre-conroe, how can I add this to virt engine? Im running ovirt-enige on Fedora 16, and the node is using ovirt node, both from http://www.ovirt.org/get-ovirt/ Thanks, Barry.

1 0

Re: [Users] Adding oVirt Node Fails
by Doron Fediuck 05 May '12

05 May '12

R this should be done on the node machine. Sent from my Android phone. Please ignore typos. -----Original Message----- From: Nicholas Kesick [cybertimber2000(a)hotmail.com] Received: Saturday, 05 May 2012, 21:55 To: dfediuck(a)redhat.com CC: mburns(a)redhat.com, oVirt Mailing List [users(a)ovirt.org] Subject: RE: [Users] Adding oVirt Node Fails > Date: Sat, 5 May 2012 12:29:20 +0300 > From: dfediuck(a)redhat.com > To: cybertimber2000(a)hotmail.com > CC: mburns(a)redhat.com; users(a)ovirt.org > Subject: Re: [Users] Adding oVirt Node Fails > > On 04/05/12 02:49, Nicholas Kesick wrote: > > Fri, 27 Apr 2012 05:22:24 DEBUG instCert: try to delete old certificates > > Fri, 27 Apr 2012 05:22:24 DEBUG instCert: failed. > > Traceback (most recent call last): > > File "/usr/share/vdsm-reg/deployUtil.py", line 1133, in instCert > > File "/usr/share/vdsm-reg/deployUtil.py", line 1098, in pkiCleanup > > OSError: [Errno 16] Device or resource busy: '/etc/pki/vdsm/certs/cacert.pem' > > > Nicholas, > I think I got it; > Please check if this file exists: '/etc/rhev-hypervisor-release'. > If not, try to create a sym-link in this name to /etc/system-release, > and restart vdsm-reg service. > > Also please provide the rpm information for vdsm-reg and vdsm as well. > -- > > /d > > "Common sense is not so common." --Voltaire, Dictionnaire Philosophique (1764) Just to make sure I do it right, can you specify which you wanted done on the node, and which you wanted on the manager? I have the feeling you wanted it all done on the node. Sent from my Android phone. Please ignore typos.

1 0

[Users] testing ovirt-engine in Fedora 17: how to get webadmin?
by Jason Brooks 04 May '12

04 May '12

I'm testing out the ovirt-engine packages in Fedora 17. At the URL for the engine, there's a note, "Note: You are using a stripped down version, full version with GUI included can be downloaded in oVirt Project Site." The note links to the ovirt.org wordpress blog -- is there a suggested path to getting the full gui that works with the Fedora 17 packages? Thanks, Jason

2 1

[Users] Problems when install ovirt-engine from rpm
by Cao,Bing Bu 03 May '12

03 May '12

Hi, I want to install the ovirt-engine from rpm package. Using the guide on wiki page: http://www.ovirt.org/wiki/Installing_ovirt-engine_from_rpm But when I install the ovirt-engine #sudo yum install -y ovirt-engine reported on error: Installing : ovirt-engine- 3.0.0_0001-1.6.fc16.x86_64 1/1 Error unpacking rpm package ovirt-engine-3.0.0_0001-1.6.fc16.x86_64 error: unpacking of archive failed on file /usr/share/jboss-as/modules/org/postgresql/main/postgresql-jdbc.jar;4fa1e777: cpio: mkdir Verifying : ovirt-engine-3.0.0_0001-1.6.fc16.x86_64 1/1 Failed: ovirt-engine.x86_64 0:3.0.0_0001-1.6.fc16 Can anyone tell me what is the matter? -- Best Regards, Cao,Bing Bu

5 9

Re: [Users] error when regestering a host with vdsm 4.9.6 in ovirt 3.1
by Maxime JÉGO 03 May '12

03 May '12

Hi, I have exactly the same problem, i want to add a host (centos 6.2) in ovirt, and i have the same error. It is very strange, here logs : <BSTRAP component='VDS PACKAGES' status='OK' result='libselinux-python' message='libselinux-python-2.0.94-5.2.el6.x86_64 '/> <BSTRAP component='CreateConf' status='FAIL' message='Basic configuration failed to import default values'/> <BSTRAP component='RHEV_INSTALL' status='FAIL'/> . Error occured. (Stage: Running first installation script on Host) 2012-05-03 03:37:40,538 INFO [org.ovirt.engine.core.utils.hostinstall.MinaInstallWrapper] (pool-5-thread-50) RunSSHCommand returns true 2012-05-03 03:37:40,538 INFO [org.ovirt.engine.core.bll.VdsInstaller] (pool-5-thread-50) RunScript ended:true 2012-05-03 03:37:40,539 ERROR [org.ovirt.engine.core.bll.VdsInstaller] (pool-5-thread-50) Installation of 192.168.10.19. Operation failure. (Stage: Running first installation script on Host) Thank's fort help ;) Maxime. Hi, On 04/27/2012 08:44 AM, Nathanaël Blanchet wrote: here they are, there is a lot of log files, because I tried a lot of time :) Le 27/04/2012 15:16, Douglas Landgraf a écrit : Hi, On 04/26/2012 11:37 AM, Nathanaël Blanchet wrote: I have built and installed the latest RPM ovirt-engine from the source on F16 and the latest RPM VDSM 4.9.6 on F17 because of nedeed dependancies. when I add a new host, installation always fails with this issue : Failed to install Host khamsin. Step: CreateConf; Details: Basic configuration failed to import default values. I tried to disable ssl in engine and vdsm but it is the same. I have searched more explications into vdsm and ovirt log but I have found anything I suppose vdsm to be the problem, the only way to build it with success is to install it on F17, which is a beta release... This makes me crazy! May anybody help me to find a clue for this issue? on Node side, can you please share /tmp/vds_* logs? rpm -qa | grep vdsm (from oVirt Node and oVirt engine) As we resolved this case by irc, here the reply to mailing list: ============= The error from logs: Fri, 27 Apr 2012 14:55:24 DEBUG <BSTRAP component='VDS PACKAGES' status='OK' result='libjpeg' message='le paquetage libjpeg n~est pas installÃ© '/> Fri, 27 Apr 2012 14:55:24 ERROR Traceback (most recent call last): File "/tmp/vds_bootstrap_9e3dc61c-4ef8-4c42-873c-6209c522ac4c.py", line 594, in createConf self._makeConfig() File "/tmp/vds_bootstrap_9e3dc61c-4ef8-4c42-873c-6209c522ac4c.py", line 557, in _makeConfig from config import config ImportError: No module named config Fri, 27 Apr 2012 14:55:24 DEBUG <BSTRAP component='CreateConf' status='FAIL' message='Basic configuration failed to import default values'/> Fri, 27 Apr 2012 14:55:24 ERROR createConf failed Fri, 27 Apr 2012 14:55:24 DEBUG <BSTRAP component='RHEV_INSTALL' status='FAIL'/> Fri, 27 Apr 2012 14:55:24 DEBUG **** End VDS Validation **** ========= On Engine side Nathanaël's machine had: vds_bootstrap version (vdsm-bootstrap-4.9.3.2-0.fc16.noarch) which had to update to a newer version: 4.9.6 copied new vds_bootstrap files from: /usr/share/vds_bootstrap to /usr/share/ovirt-engine/engine.ear/components.war/vds and removed any *.pyc and *.pyo from there. On Node side: rm -f /tmp/deploy* (remove old deployUtil) rm -f /tmp/vds* (remove old log files) -- Cheers Douglas

5 7

Re: [Users] error when regestering a host with vdsm 4.9.6 in ovirt 3.1
by Maxime JÉGO 03 May '12

03 May '12

My version of ovirt-engine is 3.0. here my logs on /var/log/vdsm-reg/vdsm-reg.log : [root@ovs2 vdsm-reg]# cat vdsm-reg.log MainThread::INFO::2012-05-03 11:22:17,850::vdsm-reg-setup::244::vdsRegistrator::After daemonize - My pid is 30705 MainThread::DEBUG::2012-05-03 11:22:17,851::vdsm-reg-setup::37::root::__init__ begin. MainThread::DEBUG::2012-05-03 11:22:17,851::vdsm-reg-setup::63::root::Setup::__init__ vars: {'vdcRegPort': '54321', 'ovirtUID': 'None', 'ovirtName': 'None', 'fInitOK': True, 'registered': False, 'ovirtURL': 'None', 'vdcName': 'None', 'vdcPORT': '8443', 'VDCTime': None, 'ticket': '', 'vdcURI': '/OvirtEngineWeb/register', 'vdsmDir': '/usr/share/vdsm', 'vdcURL': 'None'} MainThread::DEBUG::2012-05-03 11:22:17,851::vdsm-reg-setup::66::root::validate start MainThread::DEBUG::2012-05-03 11:22:17,851::vdsm-reg-setup::73::root::validate end. return: False MainThread::DEBUG::2012-05-03 11:22:25,860::vdsm-reg-setup::270::vdsRegistrator::Total retry count: 1, waited: 8 seconds. MainThread::DEBUG::2012-05-03 11:22:25,860::vdsm-reg-setup::37::root::__init__ begin. MainThread::DEBUG::2012-05-03 11:22:25,860::vdsm-reg-setup::63::root::Setup::__init__ vars: {'vdcRegPort': '54321', 'ovirtUID': 'None', 'ovirtName': 'None', 'fInitOK': True, 'registered': False, 'ovirtURL': 'None', 'vdcName': 'None', 'vdcPORT': '8443', 'VDCTime': None, 'ticket': '', 'vdcURI': '/OvirtEngineWeb/register', 'vdsmDir': '/usr/share/vdsm', 'vdcURL': 'None'} MainThread::DEBUG::2012-05-03 11:22:25,860::vdsm-reg-setup::66::root::validate start MainThread::DEBUG::2012-05-03 11:22:25,860::vdsm-reg-setup::73::root::validate end. return: False MainThread::DEBUG::2012-05-03 11:22:33,865::vdsm-reg-setup::270::vdsRegistrator::Total retry count: 2, waited: 8 seconds. MainThread::DEBUG::2012-05-03 11:22:33,866::vdsm-reg-setup::37::root::__init__ begin. MainThread::DEBUG::2012-05-03 11:22:33,866::vdsm-reg-setup::63::root::Setup::__init__ vars: {'vdcRegPort': '54321', 'ovirtUID': 'None', 'ovirtName': 'None', 'fInitOK': True, 'registered': False, 'ovirtURL': 'None', 'vdcName': 'None', 'vdcPORT': '8443', 'VDCTime': None, 'ticket': '', 'vdcURI': '/OvirtEngineWeb/register', 'vdsmDir': '/usr/share/vdsm', 'vdcURL': 'None'} MainThread::DEBUG::2012-05-03 11:22:33,866::vdsm-reg-setup::66::root::validate start MainThread::DEBUG::2012-05-03 11:22:33,866::vdsm-reg-setup::73::root::validate end. return: False ....... thank's. Le 03/05/2012 11:16, Maxime JEGO a écrit : > I have nothing in /var/log/vdsm-reg/ (i have just the folder) > > > Le 03/05/2012 09:57, Doron Fediuck a écrit : >> Can you verify it in the host's registration logs (/var/log/vdsm-reg/*) ? >> >> On 03/05/12 10:56, Maxime JÉGO wrote: >>> Hi, I have exactly the same problem, i want to add a host (centos 6.2) in ovirt, and i have the same error. It is very strange, here logs : >>> >>> <BSTRAP component='VDS PACKAGES' status='OK' result='libselinux-python' message='libselinux-python-2.0.94-5.2.el6.x86_64 '/> >>> <BSTRAP component='CreateConf' status='FAIL' message='Basic configuration failed to import default values'/> >>> <BSTRAP component='RHEV_INSTALL' status='FAIL'/> >>> . Error occured. (Stage: Running first installation script on Host) >>> 2012-05-03 03:37:40,538 INFO [org.ovirt.engine.core.utils.hostinstall.MinaInstallWrapper] (pool-5-thread-50) RunSSHCommand returns true >>> 2012-05-03 03:37:40,538 INFO [org.ovirt.engine.core.bll.VdsInstaller] (pool-5-thread-50) RunScript ended:true >>> 2012-05-03 03:37:40,539 ERROR [org.ovirt.engine.core.bll.VdsInstaller] (pool-5-thread-50) Installation of 192.168.10.19. Operation failure. (Stage: Running first installation script on Host) >>> >>> Thank's fort help >>> >>> Maxime. >>> >>> >>> >>> Hi, >>> >>> On 04/27/2012 08:44 AM, Nathanaël Blanchet wrote: >>> >>> here they are, there is a lot of log files, because I tried a lot of time >>> >>> Le 27/04/2012 15:16, Douglas Landgraf a écrit : >>> >>> Hi, >>> >>> On 04/26/2012 11:37 AM, Nathanaël Blanchet wrote: >>> >>> I have built and installed the latest RPM ovirt-engine from the source on F16 and the latest RPM VDSM 4.9.6 on F17 because of nedeed dependancies. >>> >>> when I add a new host, installation always fails with this issue : >>> >>> Failed to install Host khamsin. Step: CreateConf; Details: Basic configuration failed to import default values. >>> >>> I tried to disable ssl in engine and vdsm but it is the same. >>> >>> >>> I have searched more explications into vdsm and ovirt log but I have found anything I suppose vdsm to be the problem, the only way to build it with success is to install it on F17, which is a beta release... >>> >>> This makes me crazy! >>> May anybody help me to find a clue for this issue? >>> >>> >>> on Node side, can you please share /tmp/vds_* logs? >>> rpm -qa | grep vdsm (from oVirt Node and oVirt engine) >>> >>> >>> As we resolved this case by irc, here the reply to mailing list: >>> >>> ============= >>> >>> The error from logs: >>> >>> >>> Fri, 27 Apr 2012 14:55:24 DEBUG<BSTRAP component='VDS PACKAGES' status='OK' result='libjpeg' message='le paquetage libjpeg n~est pas installÃ© '/> >>> >>> Fri, 27 Apr 2012 14:55:24 ERROR >>> Traceback (most recent call last): >>> >>> File "/tmp/vds_bootstrap_9e3dc61c-4ef8-4c42-873c-6209c522ac4c.py", line 594, in createConf >>> >>> self._makeConfig() >>> >>> File "/tmp/vds_bootstrap_9e3dc61c-4ef8-4c42-873c-6209c522ac4c.py", line 557, in _makeConfig >>> >>> from config import config >>> ImportError: No module named config >>> >>> Fri, 27 Apr 2012 14:55:24 DEBUG<BSTRAP component='CreateConf' status='FAIL' message='Basic configuration failed to import default values'/> >>> >>> Fri, 27 Apr 2012 14:55:24 ERROR createConf failed >>> >>> Fri, 27 Apr 2012 14:55:24 DEBUG<BSTRAP component='RHEV_INSTALL' status='FAIL'/> >>> >>> Fri, 27 Apr 2012 14:55:24 DEBUG **** End VDS Validation **** >>> >>> >>> ========= >>> >>> >>> On Engine side Nathanaël's machine had: vds_bootstrap version (vdsm-bootstrap-4.9.3.2-0.fc16.noarch) which had to update to a newer version: 4.9.6 copied new vds_bootstrap files from: /usr/share/vds_bootstrap to /usr/share/ovirt-engine/engine.ear/components.war/vds >>> >>> and removed any *.pyc and *.pyo from there. >>> >>> On Node side: >>> >>> rm -f /tmp/deploy* (remove old deployUtil) >>> rm -f /tmp/vds* (remove old log files) >>> >>> >>> >>> >>> >>> -- >>> Cheers >>> Douglas >>> _______________________________________________ >>> Users mailing list >>> Users(a)ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >> >

2 1

Re: [Users] error when regestering a host with vdsm 4.9.6 in ovirt 3.0
by Max Jégo 03 May '12

03 May '12

--------------010208060907070103020307 Content-Type: text/plain; charset="ISO-8859-1"; format=flowed Content-Transfer-Encoding: 8bit here my logs on /var/log/vdsm-reg/vdsm-reg.log : [root@ovs2 vdsm-reg]# cat vdsm-reg.log MainThread::INFO::2012-05-03 11:22:17,850::vdsm-reg-setup::244::vdsRegistrator::After daemonize - My pid is 30705 MainThread::DEBUG::2012-05-03 11:22:17,851::vdsm-reg-setup::37::root::__init__ begin. MainThread::DEBUG::2012-05-03 11:22:17,851::vdsm-reg-setup::63::root::Setup::__init__ vars: {'vdcRegPort': '54321', 'ovirtUID': 'None', 'ovirtName': 'None', 'fInitOK': True, 'registered': False, 'ovirtURL': 'None', 'vdcName': 'None', 'vdcPORT': '8443', 'VDCTime': None, 'ticket': '', 'vdcURI': '/OvirtEngineWeb/register', 'vdsmDir': '/usr/share/vdsm', 'vdcURL': 'None'} MainThread::DEBUG::2012-05-03 11:22:17,851::vdsm-reg-setup::66::root::validate start MainThread::DEBUG::2012-05-03 11:22:17,851::vdsm-reg-setup::73::root::validate end. return: False MainThread::DEBUG::2012-05-03 11:22:25,860::vdsm-reg-setup::270::vdsRegistrator::Total retry count: 1, waited: 8 seconds. MainThread::DEBUG::2012-05-03 11:22:25,860::vdsm-reg-setup::37::root::__init__ begin. MainThread::DEBUG::2012-05-03 11:22:25,860::vdsm-reg-setup::63::root::Setup::__init__ vars: {'vdcRegPort': '54321', 'ovirtUID': 'None', 'ovirtName': 'None', 'fInitOK': True, 'registered': False, 'ovirtURL': 'None', 'vdcName': 'None', 'vdcPORT': '8443', 'VDCTime': None, 'ticket': '', 'vdcURI': '/OvirtEngineWeb/register', 'vdsmDir': '/usr/share/vdsm', 'vdcURL': 'None'} MainThread::DEBUG::2012-05-03 11:22:25,860::vdsm-reg-setup::66::root::validate start MainThread::DEBUG::2012-05-03 11:22:25,860::vdsm-reg-setup::73::root::validate end. return: False MainThread::DEBUG::2012-05-03 11:22:33,865::vdsm-reg-setup::270::vdsRegistrator::Total retry count: 2, waited: 8 seconds. MainThread::DEBUG::2012-05-03 11:22:33,866::vdsm-reg-setup::37::root::__init__ begin. MainThread::DEBUG::2012-05-03 11:22:33,866::vdsm-reg-setup::63::root::Setup::__init__ vars: {'vdcRegPort': '54321', 'ovirtUID': 'None', 'ovirtName': 'None', 'fInitOK': True, 'registered': False, 'ovirtURL': 'None', 'vdcName': 'None', 'vdcPORT': '8443', 'VDCTime': None, 'ticket': '', 'vdcURI': '/OvirtEngineWeb/register', 'vdsmDir': '/usr/share/vdsm', 'vdcURL': 'None'} MainThread::DEBUG::2012-05-03 11:22:33,866::vdsm-reg-setup::66::root::validate start MainThread::DEBUG::2012-05-03 11:22:33,866::vdsm-reg-setup::73::root::validate end. return: False ....... thank's. Can you verify it in the host's registration logs (/var/log/vdsm-reg/*) ? On 03/05/12 10:56, Maxime JÉGO wrote: > Hi, I have exactly the same problem, i want to add a host (centos 6.2) in ovirt, and i have the same error. It is very strange, here logs : > > <BSTRAP component='VDS PACKAGES' status='OK' result='libselinux-python' message='libselinux-python-2.0.94-5.2.el6.x86_64 '/> > <BSTRAP component='CreateConf' status='FAIL' message='Basic configuration failed to import default values'/> > <BSTRAP component='RHEV_INSTALL' status='FAIL'/> > . Error occured. (Stage: Running first installation script on Host) > 2012-05-03 03:37:40,538 INFO [org.ovirt.engine.core.utils.hostinstall.MinaInstallWrapper] (pool-5-thread-50) RunSSHCommand returns true > 2012-05-03 03:37:40,538 INFO [org.ovirt.engine.core.bll.VdsInstaller] (pool-5-thread-50) RunScript ended:true > 2012-05-03 03:37:40,539 ERROR [org.ovirt.engine.core.bll.VdsInstaller] (pool-5-thread-50) Installation of 192.168.10.19. Operation failure. (Stage: Running first installation script on Host) > > Thank's fort help > > Maxime. > > > > Hi, > > On 04/27/2012 08:44 AM, Nathanaël Blanchet wrote: > > here they are, there is a lot of log files, because I tried a lot of time > > Le 27/04/2012 15:16, Douglas Landgraf a écrit : > > Hi, > > On 04/26/2012 11:37 AM, Nathanaël Blanchet wrote: > > I have built and installed the latest RPM ovirt-engine from the source on F16 and the latest RPM VDSM 4.9.6 on F17 because of nedeed dependancies. > > when I add a new host, installation always fails with this issue : > > Failed to install Host khamsin. Step: CreateConf; Details: Basic configuration failed to import default values. > > I tried to disable ssl in engine and vdsm but it is the same. > > > I have searched more explications into vdsm and ovirt log but I have found anything I suppose vdsm to be the problem, the only way to build it with success is to install it on F17, which is a beta release... > > This makes me crazy! > May anybody help me to find a clue for this issue? > > > on Node side, can you please share /tmp/vds_* logs? > rpm -qa | grep vdsm (from oVirt Node and oVirt engine) > > > As we resolved this case by irc, here the reply to mailing list: > > ============= > > The error from logs: > > > Fri, 27 Apr 2012 14:55:24 DEBUG<BSTRAP component='VDS PACKAGES' status='OK' result='libjpeg' message='le paquetage libjpeg n~est pas installÃ© '/> > > Fri, 27 Apr 2012 14:55:24 ERROR > Traceback (most recent call last): > > File "/tmp/vds_bootstrap_9e3dc61c-4ef8-4c42-873c-6209c522ac4c.py", line 594, in createConf > > self._makeConfig() > > File "/tmp/vds_bootstrap_9e3dc61c-4ef8-4c42-873c-6209c522ac4c.py", line 557, in _makeConfig > > from config import config > ImportError: No module named config > > Fri, 27 Apr 2012 14:55:24 DEBUG<BSTRAP component='CreateConf' status='FAIL' message='Basic configuration failed to import default values'/> > > Fri, 27 Apr 2012 14:55:24 ERROR createConf failed > > Fri, 27 Apr 2012 14:55:24 DEBUG<BSTRAP component='RHEV_INSTALL' status='FAIL'/> > > Fri, 27 Apr 2012 14:55:24 DEBUG **** End VDS Validation **** > > > ========= > > > On Engine side Nathanaël's machine had: vds_bootstrap version (vdsm-bootstrap-4.9.3.2-0.fc16.noarch) which had to update to a newer version: 4.9.6 copied new vds_bootstrap files from: /usr/share/vds_bootstrap to /usr/share/ovirt-engine/engine.ear/components.war/vds > > and removed any *.pyc and *.pyo from there. > > On Node side: > > rm -f /tmp/deploy* (remove old deployUtil) > rm -f /tmp/vds* (remove old log files) > > > > > > -- > Cheers > Douglas > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users -- /d "Ford," he said, "you're turning into a penguin. Stop it." --Douglas Adams, The Hitchhiker's Guide to the Galaxy --------------010208060907070103020307 Content-Type: text/html; charset="ISO-8859-1" Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body bgcolor="#FFFFFF" text="#000000"> <div class="moz-text-plain" wrap="true" graphical-quote="true" style="font-family: -moz-fixed; font-size: 12px;" lang="x-unicode"> <pre wrap="">here my logs on /var/log/vdsm-reg/vdsm-reg.log : [root@ovs2 vdsm-reg]# cat vdsm-reg.log MainThread::INFO::2012-05-03 11:22:17,850::vdsm-reg-setup::244::vdsRegistrator::After daemonize - My pid is 30705 MainThread::DEBUG::2012-05-03 11:22:17,851::vdsm-reg-setup::37::root::__init__ begin. MainThread::DEBUG::2012-05-03 11:22:17,851::vdsm-reg-setup::63::root::Setup::__init__ vars: {'vdcRegPort': '54321', 'ovirtUID': 'None', 'ovirtName': 'None', 'fInitOK': True, 'registered': False, 'ovirtURL': 'None', 'vdcName': 'None', 'vdcPORT': '8443', 'VDCTime': None, 'ticket': '', 'vdcURI': '/OvirtEngineWeb/register', 'vdsmDir': '/usr/share/vdsm', 'vdcURL': 'None'} MainThread::DEBUG::2012-05-03 11:22:17,851::vdsm-reg-setup::66::root::validate start MainThread::DEBUG::2012-05-03 11:22:17,851::vdsm-reg-setup::73::root::validate end. return: False MainThread::DEBUG::2012-05-03 11:22:25,860::vdsm-reg-setup::270::vdsRegistrator::Total retry count: 1, waited: 8 seconds. MainThread::DEBUG::2012-05-03 11:22:25,860::vdsm-reg-setup::37::root::__init__ begin. MainThread::DEBUG::2012-05-03 11:22:25,860::vdsm-reg-setup::63::root::Setup::__init__ vars: {'vdcRegPort': '54321', 'ovirtUID': 'None', 'ovirtName': 'None', 'fInitOK': True, 'registered': False, 'ovirtURL': 'None', 'vdcName': 'None', 'vdcPORT': '8443', 'VDCTime': None, 'ticket': '', 'vdcURI': '/OvirtEngineWeb/register', 'vdsmDir': '/usr/share/vdsm', 'vdcURL': 'None'} MainThread::DEBUG::2012-05-03 11:22:25,860::vdsm-reg-setup::66::root::validate start MainThread::DEBUG::2012-05-03 11:22:25,860::vdsm-reg-setup::73::root::validate end. return: False MainThread::DEBUG::2012-05-03 11:22:33,865::vdsm-reg-setup::270::vdsRegistrator::Total retry count: 2, waited: 8 seconds. MainThread::DEBUG::2012-05-03 11:22:33,866::vdsm-reg-setup::37::root::__init__ begin. MainThread::DEBUG::2012-05-03 11:22:33,866::vdsm-reg-setup::63::root::Setup::__init__ vars: {'vdcRegPort': '54321', 'ovirtUID': 'None', 'ovirtName': 'None', 'fInitOK': True, 'registered': False, 'ovirtURL': 'None', 'vdcName': 'None', 'vdcPORT': '8443', 'VDCTime': None, 'ticket': '', 'vdcURI': '/OvirtEngineWeb/register', 'vdsmDir': '/usr/share/vdsm', 'vdcURL': 'None'} MainThread::DEBUG::2012-05-03 11:22:33,866::vdsm-reg-setup::66::root::validate start MainThread::DEBUG::2012-05-03 11:22:33,866::vdsm-reg-setup::73::root::validate end. return: False ....... thank's. Can you verify it in the host's registration logs (<i class="moz-txt-slash"><span class="moz-txt-tag">/</span>var/log/vdsm-reg<span class="moz-txt-tag">/</span></i>*) ? On 03/05/12 10:56, Maxime JÉGO wrote: </pre> <blockquote type="cite" style="color: #000000;"> <pre wrap="">Hi, I have exactly the same problem, i want to add a host (centos 6.2) in ovirt, and i have the same error. It is very strange, here logs : <BSTRAP component='VDS PACKAGES' status='OK' result='libselinux-python' message='libselinux-python-2.0.94-5.2.el6.x86_64 '/> <BSTRAP component='CreateConf' status='FAIL' message='Basic configuration failed to import default values'/> <BSTRAP component='RHEV_INSTALL' status='FAIL'/> . Error occured. (Stage: Running first installation script on Host) 2012-05-03 03:37:40,538 INFO [org.ovirt.engine.core.utils.hostinstall.MinaInstallWrapper] (pool-5-thread-50) RunSSHCommand returns true 2012-05-03 03:37:40,538 INFO [org.ovirt.engine.core.bll.VdsInstaller] (pool-5-thread-50) RunScript ended:true 2012-05-03 03:37:40,539 ERROR [org.ovirt.engine.core.bll.VdsInstaller] (pool-5-thread-50) Installation of 192.168.10.19. Operation failure. (Stage: Running first installation script on Host) Thank's fort help <span class="moz-smiley-s3" title=";)"></span> Maxime. Hi, On 04/27/2012 08:44 AM, Nathanaël Blanchet wrote: here they are, there is a lot of log files, because I tried a lot of time <span class="moz-smiley-s1" title=":)"></span> Le 27/04/2012 15:16, Douglas Landgraf a écrit : Hi, On 04/26/2012 11:37 AM, Nathanaël Blanchet wrote: I have built and installed the latest RPM ovirt-engine from the source on F16 and the latest RPM VDSM 4.9.6 on F17 because of nedeed dependancies. when I add a new host, installation always fails with this issue : Failed to install Host khamsin. Step: CreateConf; Details: Basic configuration failed to import default values. I tried to disable ssl in engine and vdsm but it is the same. I have searched more explications into vdsm and ovirt log but I have found anything I suppose vdsm to be the problem, the only way to build it with success is to install it on F17, which is a beta release... This makes me crazy! May anybody help me to find a clue for this issue? on Node side, can you please share /tmp/vds_* logs? rpm -qa | grep vdsm (from oVirt Node and oVirt engine) As we resolved this case by irc, here the reply to mailing list: ============= The error from logs: Fri, 27 Apr 2012 14:55:24 DEBUG <BSTRAP component='VDS PACKAGES' status='OK' result='libjpeg' message='le paquetage libjpeg n~est pas installÃ© '/> Fri, 27 Apr 2012 14:55:24 ERROR Traceback (most recent call last): File "/tmp/vds_bootstrap_9e3dc61c-4ef8-4c42-873c-6209c522ac4c.py", line 594, in createConf self._makeConfig() File "/tmp/vds_bootstrap_9e3dc61c-4ef8-4c42-873c-6209c522ac4c.py", line 557, in _makeConfig from config import config ImportError: No module named config Fri, 27 Apr 2012 14:55:24 DEBUG <BSTRAP component='CreateConf' status='FAIL' message='Basic configuration failed to import default values'/> Fri, 27 Apr 2012 14:55:24 ERROR createConf failed Fri, 27 Apr 2012 14:55:24 DEBUG <BSTRAP component='RHEV_INSTALL' status='FAIL'/> Fri, 27 Apr 2012 14:55:24 DEBUG **** End VDS Validation **** ========= On Engine side Nathanaël's machine had: vds_bootstrap version (vdsm-bootstrap-4.9.3.2-0.fc16.noarch) which had to update to a newer version: 4.9.6 copied new vds_bootstrap files from: /usr/share/vds_bootstrap to /usr/share/ovirt-engine/engine.ear/components.war/vds and removed any *.pyc and *.pyo from there. On Node side: rm -f /tmp/deploy* (remove old deployUtil) rm -f /tmp/vds* (remove old log files) -- Cheers Douglas _______________________________________________ Users mailing list <a class="moz-txt-link-abbreviated" href="mailto:Users@ovirt.org">Users(a)ovirt.org</a> <a class="moz-txt-link-freetext" href="http://lists.ovirt.org/mailman/listinfo/users">http://lists.ovirt.org/mailman/listinfo/users</a> </pre> </blockquote> <pre wrap=""><div class="moz-txt-sig">-- /d "Ford," he said, "you're turning into a penguin. Stop it." --Douglas Adams, The Hitchhiker's Guide to the Galaxy </div></pre> </div> </body> </html> --------------010208060907070103020307--

1 0

Re: [Users] error when regestering a host with vdsm 4.9.6 in ovirt 3.1
by Max Jégo 03 May '12

03 May '12

Sorry, I have replied too quickly, here my logs on /var/log/vdsm-reg/vdsm-reg.log : [root@ovs2 vdsm-reg]# cat vdsm-reg.log MainThread::INFO::2012-05-03 11:22:17,850::vdsm-reg-setup::244::vdsRegistrator::After daemonize - My pid is 30705 MainThread::DEBUG::2012-05-03 11:22:17,851::vdsm-reg-setup::37::root::__init__ begin. MainThread::DEBUG::2012-05-03 11:22:17,851::vdsm-reg-setup::63::root::Setup::__init__ vars: {'vdcRegPort': '54321', 'ovirtUID': 'None', 'ovirtName': 'None', 'fInitOK': True, 'registered': False, 'ovirtURL': 'None', 'vdcName': 'None', 'vdcPORT': '8443', 'VDCTime': None, 'ticket': '', 'vdcURI': '/OvirtEngineWeb/register', 'vdsmDir': '/usr/share/vdsm', 'vdcURL': 'None'} MainThread::DEBUG::2012-05-03 11:22:17,851::vdsm-reg-setup::66::root::validate start MainThread::DEBUG::2012-05-03 11:22:17,851::vdsm-reg-setup::73::root::validate end. return: False MainThread::DEBUG::2012-05-03 11:22:25,860::vdsm-reg-setup::270::vdsRegistrator::Total retry count: 1, waited: 8 seconds. MainThread::DEBUG::2012-05-03 11:22:25,860::vdsm-reg-setup::37::root::__init__ begin. MainThread::DEBUG::2012-05-03 11:22:25,860::vdsm-reg-setup::63::root::Setup::__init__ vars: {'vdcRegPort': '54321', 'ovirtUID': 'None', 'ovirtName': 'None', 'fInitOK': True, 'registered': False, 'ovirtURL': 'None', 'vdcName': 'None', 'vdcPORT': '8443', 'VDCTime': None, 'ticket': '', 'vdcURI': '/OvirtEngineWeb/register', 'vdsmDir': '/usr/share/vdsm', 'vdcURL': 'None'} MainThread::DEBUG::2012-05-03 11:22:25,860::vdsm-reg-setup::66::root::validate start MainThread::DEBUG::2012-05-03 11:22:25,860::vdsm-reg-setup::73::root::validate end. return: False MainThread::DEBUG::2012-05-03 11:22:33,865::vdsm-reg-setup::270::vdsRegistrator::Total retry count: 2, waited: 8 seconds. MainThread::DEBUG::2012-05-03 11:22:33,866::vdsm-reg-setup::37::root::__init__ begin. MainThread::DEBUG::2012-05-03 11:22:33,866::vdsm-reg-setup::63::root::Setup::__init__ vars: {'vdcRegPort': '54321', 'ovirtUID': 'None', 'ovirtName': 'None', 'fInitOK': True, 'registered': False, 'ovirtURL': 'None', 'vdcName': 'None', 'vdcPORT': '8443', 'VDCTime': None, 'ticket': '', 'vdcURI': '/OvirtEngineWeb/register', 'vdsmDir': '/usr/share/vdsm', 'vdcURL': 'None'} MainThread::DEBUG::2012-05-03 11:22:33,866::vdsm-reg-setup::66::root::validate start MainThread::DEBUG::2012-05-03 11:22:33,866::vdsm-reg-setup::73::root::validate end. return: False ....... thank's. Le 03/05/2012 11:16, Maxime JEGO a écrit : > I have nothing in /var/log/vdsm-reg/ (i have just the folder) > > > Le 03/05/2012 09:57, Doron Fediuck a écrit : >> Can you verify it in the host's registration logs >> (/var/log/vdsm-reg/*) ? >> >> On 03/05/12 10:56, Maxime JÉGO wrote: >>> Hi, I have exactly the same problem, i want to add a host (centos >>> 6.2) in ovirt, and i have the same error. It is very strange, here >>> logs : >>> >>> <BSTRAP component='VDS PACKAGES' status='OK' >>> result='libselinux-python' >>> message='libselinux-python-2.0.94-5.2.el6.x86_64 '/> >>> <BSTRAP component='CreateConf' status='FAIL' message='Basic >>> configuration failed to import default values'/> >>> <BSTRAP component='RHEV_INSTALL' status='FAIL'/> >>> . Error occured. (Stage: Running first installation script on Host) >>> 2012-05-03 03:37:40,538 INFO >>> [org.ovirt.engine.core.utils.hostinstall.MinaInstallWrapper] >>> (pool-5-thread-50) RunSSHCommand returns true >>> 2012-05-03 03:37:40,538 INFO >>> [org.ovirt.engine.core.bll.VdsInstaller] (pool-5-thread-50) >>> RunScript ended:true >>> 2012-05-03 03:37:40,539 ERROR >>> [org.ovirt.engine.core.bll.VdsInstaller] (pool-5-thread-50) >>> Installation of 192.168.10.19. Operation failure. (Stage: Running >>> first installation script on Host) >>> >>> Thank's fort help ;) >>> >>> Maxime. >>> >>> >>> >>> Hi, >>> >>> On 04/27/2012 08:44 AM, Nathanaël Blanchet wrote: >>> >>> here they are, there is a lot of log files, because I tried a lot of >>> time :) >>> >>> Le 27/04/2012 15:16, Douglas Landgraf a écrit : >>> >>> Hi, >>> >>> On 04/26/2012 11:37 AM, Nathanaël Blanchet wrote: >>> >>> I have built and installed the latest RPM ovirt-engine from the >>> source on F16 and the latest RPM VDSM 4.9.6 on F17 because of nedeed >>> dependancies. >>> >>> when I add a new host, installation always fails with this issue : >>> >>> Failed to install Host khamsin. Step: CreateConf; Details: Basic >>> configuration failed to import default values. >>> >>> I tried to disable ssl in engine and vdsm but it is the same. >>> >>> >>> I have searched more explications into vdsm and ovirt log but I have >>> found anything I suppose vdsm to be the problem, the only way to >>> build it with success is to install it on F17, which is a beta >>> release... >>> >>> This makes me crazy! >>> May anybody help me to find a clue for this issue? >>> >>> >>> on Node side, can you please share /tmp/vds_* logs? >>> rpm -qa | grep vdsm (from oVirt Node and oVirt engine) >>> >>> >>> As we resolved this case by irc, here the reply to mailing list: >>> >>> ============= >>> >>> The error from logs: >>> >>> >>> Fri, 27 Apr 2012 14:55:24 DEBUG<BSTRAP component='VDS PACKAGES' >>> status='OK' result='libjpeg' message='le paquetage libjpeg n~est pas >>> installÃ© '/> >>> >>> Fri, 27 Apr 2012 14:55:24 ERROR >>> Traceback (most recent call last): >>> >>> File "/tmp/vds_bootstrap_9e3dc61c-4ef8-4c42-873c-6209c522ac4c.py", >>> line 594, in createConf >>> >>> self._makeConfig() >>> >>> File "/tmp/vds_bootstrap_9e3dc61c-4ef8-4c42-873c-6209c522ac4c.py", >>> line 557, in _makeConfig >>> >>> from config import config >>> ImportError: No module named config >>> >>> Fri, 27 Apr 2012 14:55:24 DEBUG<BSTRAP component='CreateConf' >>> status='FAIL' message='Basic configuration failed to import default >>> values'/> >>> >>> Fri, 27 Apr 2012 14:55:24 ERROR createConf failed >>> >>> Fri, 27 Apr 2012 14:55:24 DEBUG<BSTRAP component='RHEV_INSTALL' >>> status='FAIL'/> >>> >>> Fri, 27 Apr 2012 14:55:24 DEBUG **** End VDS Validation **** >>> >>> >>> ========= >>> >>> >>> On Engine side Nathanaël's machine had: vds_bootstrap version >>> (vdsm-bootstrap-4.9.3.2-0.fc16.noarch) which had to update to a >>> newer version: 4.9.6 copied new vds_bootstrap files from: >>> /usr/share/vds_bootstrap to >>> /usr/share/ovirt-engine/engine.ear/components.war/vds >>> >>> and removed any *.pyc and *.pyo from there. >>> >>> On Node side: >>> >>> rm -f /tmp/deploy* (remove old deployUtil) >>> rm -f /tmp/vds* (remove old log files) >>> >>> >>> >>> >>> >>> -- >>> Cheers >>> Douglas >>> _______________________________________________ >>> Users mailing list >>> Users(a)ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >> >

1 0

Re: [Users] error when regestering a host with vdsm 4.9.6 in ovirt 3.1
by Maxime JÉGO 03 May '12

03 May '12

Hi, I have exactly the same problem, i want to add a host (centos 6.2) in ovirt, and i have the same error. It is very strange, here logs : <BSTRAP component='VDS PACKAGES' status='OK' result='libselinux-python' message='libselinux-python-2.0.94-5.2.el6.x86_64 '/> <BSTRAP component='CreateConf' status='FAIL' message='Basic configuration failed to import default values'/> <BSTRAP component='RHEV_INSTALL' status='FAIL'/> . Error occured. (Stage: Running first installation script on Host) 2012-05-03 03:37:40,538 INFO [org.ovirt.engine.core.utils.hostinstall.MinaInstallWrapper] (pool-5-thread-50) RunSSHCommand returns true 2012-05-03 03:37:40,538 INFO [org.ovirt.engine.core.bll.VdsInstaller] (pool-5-thread-50) RunScript ended:true 2012-05-03 03:37:40,539 ERROR [org.ovirt.engine.core.bll.VdsInstaller] (pool-5-thread-50) Installation of 192.168.10.19. Operation failure. (Stage: Running first installation script on Host) Thank's fort help ;) Maxime. Hi, On 04/27/2012 08:44 AM, Nathanaël Blanchet wrote: here they are, there is a lot of log files, because I tried a lot of time :) Le 27/04/2012 15:16, Douglas Landgraf a écrit : Hi, On 04/26/2012 11:37 AM, Nathanaël Blanchet wrote: I have built and installed the latest RPM ovirt-engine from the source on F16 and the latest RPM VDSM 4.9.6 on F17 because of nedeed dependancies. when I add a new host, installation always fails with this issue : Failed to install Host khamsin. Step: CreateConf; Details: Basic configuration failed to import default values. I tried to disable ssl in engine and vdsm but it is the same. I have searched more explications into vdsm and ovirt log but I have found anything I suppose vdsm to be the problem, the only way to build it with success is to install it on F17, which is a beta release... This makes me crazy! May anybody help me to find a clue for this issue? on Node side, can you please share /tmp/vds_* logs? rpm -qa | grep vdsm (from oVirt Node and oVirt engine) As we resolved this case by irc, here the reply to mailing list: ============= The error from logs: Fri, 27 Apr 2012 14:55:24 DEBUG <BSTRAP component='VDS PACKAGES' status='OK' result='libjpeg' message='le paquetage libjpeg n~est pas installÃ© '/> Fri, 27 Apr 2012 14:55:24 ERROR Traceback (most recent call last): File "/tmp/vds_bootstrap_9e3dc61c-4ef8-4c42-873c-6209c522ac4c.py", line 594, in createConf self._makeConfig() File "/tmp/vds_bootstrap_9e3dc61c-4ef8-4c42-873c-6209c522ac4c.py", line 557, in _makeConfig from config import config ImportError: No module named config Fri, 27 Apr 2012 14:55:24 DEBUG <BSTRAP component='CreateConf' status='FAIL' message='Basic configuration failed to import default values'/> Fri, 27 Apr 2012 14:55:24 ERROR createConf failed Fri, 27 Apr 2012 14:55:24 DEBUG <BSTRAP component='RHEV_INSTALL' status='FAIL'/> Fri, 27 Apr 2012 14:55:24 DEBUG **** End VDS Validation **** ========= On Engine side Nathanaël's machine had: vds_bootstrap version (vdsm-bootstrap-4.9.3.2-0.fc16.noarch) which had to update to a newer version: 4.9.6 copied new vds_bootstrap files from: /usr/share/vds_bootstrap to /usr/share/ovirt-engine/engine.ear/components.war/vds and removed any *.pyc and *.pyo from there. On Node side: rm -f /tmp/deploy* (remove old deployUtil) rm -f /tmp/vds* (remove old log files) -- Cheers Douglas

1 0

[Users] Agenda for LinuxCon Japan Workshop
by Leslie Hawthorn 02 May '12

02 May '12

This is a multi-part message in MIME format. --------------080003060704040104000502 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hello everyone, As mentioned during last week's IRC meeting, we have an oVirt workshop scheduled for LinuxCon Japan. [0] The Linux Foundation needs our agenda, as well as speaker list and bios, by this Thursday, 3 May, so they can begin promoting. Here's the proposed agenda for the upcoming workshop: * 09:00 - 11:00 :: Welcome, introduction to oVirt architecture & demo (includes API/SDK/CLI) * 11:00 - 12:00 :: Engine core * 12:00 - 13:30 :: Lunch * 13:30 - 14:30 :: VDSM * 14:30 - 15:30 :: Node arch and details * 15:30 - 16:00 :: Break * 16:00 - 17:00 :: Linux virtualization panel (main conference) Open Questions: 1) Are there additional sessions that folks would like to propose for this workshop? 2) Would anyone like to volunteer as an instructor for any of the above proposed sessions? As mentioned, we need to have all of this information in to the Linux Foundation by this Thursday, so please send in your feedback as soon as you are able. [0] - https://events.linuxfoundation.org/events/linuxcon-japan Thank you, LH -- Leslie Hawthorn Community Action and Impact Open Source and Standards @ Red Hat identi.ca/lh twitter.com/lhawthorn --------------080003060704040104000502 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body bgcolor="#FFFFFF" text="#000000"> <small><font face="Helvetica, Arial, sans-serif"><big>Hello everyone,</big></font><br> <br> <font face="Helvetica, Arial, sans-serif"><big>As mentioned during last week's IRC meeting, we have an oVirt workshop scheduled for LinuxCon Japan. [0] The Linux Foundation needs our agenda, as well as speaker list and bios,  by this Thursday, 3 May, so they can begin promoting.</big></font><br> <br> <font face="Helvetica, Arial, sans-serif"><big>Here's the proposed agenda for the upcoming workshop:</big></font><br> <br> <font face="Helvetica, Arial, sans-serif"><big>* 09:00 - 11:00 :: Welcome, introduction to oVirt architecture & demo (includes API/SDK/CLI) <br> * 11:00 - 12:00 :: Engine core<br> * 12:00 - 13:30 :: Lunch <br> * 13:30 - 14:30 :: VDSM <br> * 14:30 - 15:30 :: Node arch and details <br> * 15:30 - 16:00 :: Break <br> * 16:00 - 17:00 :: Linux virtualization panel (main conference)<br> <font size="-1"><br> </font>Open Questions:<br> <br> 1) Are there additional sessions that folks would like to propose for this workshop?<br> 2) Would anyone like to volunteer as an instructor for any of the above proposed sessions?<br> <br> As mentioned, we need to have all of this information in to the Linux Foundation by this Thursday, so please send in your feedback as soon as you are able.<br> <br> [0] - <a class="moz-txt-link-freetext" href="https://events.linuxfoundation.org/events/linuxcon-japan">https://events.linuxfoundation.org/events/linuxcon-japan</a><br> <br> Thank you,<br> LH</big></font></small><br> <pre class="moz-signature" cols="72">-- Leslie Hawthorn Community Action and Impact Open Source and Standards @ Red Hat identi.ca/lh twitter.com/lhawthorn</pre> </body> </html> --------------080003060704040104000502--

2 2

[Users] oVirt Weekly Sync Meeting - 2012-05-02
by Ofer Schreiber 02 May '12

02 May '12

Minutes: http://ovirt.org/meetings/ovirt/2012/ovirt.2012-05-02-14.00.html Minutes (text): http://ovirt.org/meetings/ovirt/2012/ovirt.2012-05-02-14.00.txt Log: http://ovirt.org/meetings/ovirt/2012/ovirt.2012-05-02-14.00.log.html ========================= #ovirt: oVirt Weekly Sync ========================= Meeting started by oschreib at 14:00:10 UTC. The full logs are available at http://ovirt.org/meetings/ovirt/2012/ovirt.2012-05-02-14.00.log.html . Meeting summary --------------- * Agenda and Roll Call (oschreib, 14:00:14) * Next Release Status (oschreib, 14:02:17) * Feature Freeze (Branching day) 2012-05-31. (oschreib, 14:02:56) * LINK: http://www.ovirt.org/wiki/Second_Release (oschreib, 14:03:04) * ACTION: oschreib to review feature-freeze status next week (oschreib, 14:06:00) * LINK: http://www.ovirt.org/wiki/Release_Notes (sgordon, 14:07:16) * ACTION: sgordon to handle Release Notes page in the wiki (oschreib, 14:09:13) * Sub-project reports (engine, vdsm, node) (oschreib, 14:10:47) * vdsm's network config might be a risk for next release (oschreib, 14:16:35) * ACTION: danken to review vdsm's network config in next meeting (oschreib, 14:17:24) * Review decision on Java 7 and Fedora jboss rpms in oVirt Engine (oschreib, 14:18:58) * ACTION: eedri to add Java7 test to jenkins (oschreib, 14:24:33) * Upcoming workshops (oschreib, 14:27:49) * LINK: http://lists.ovirt.org/pipermail/arch/2012-April/000546.html (lh, 14:27:57) * ACTION: lh to send follow up email to board re: lc japan workshop (lh, 14:33:50) Meeting ended at 14:37:39 UTC. Action Items ------------ * oschreib to review feature-freeze status next week * sgordon to handle Release Notes page in the wiki * danken to review vdsm's network config in next meeting * eedri to add Java7 test to jenkins * lh to send follow up email to board re: lc japan workshop Action Items, by person ----------------------- * danken * danken to review vdsm's network config in next meeting * lh * lh to send follow up email to board re: lc japan workshop * oschreib * oschreib to review feature-freeze status next week * sgordon * sgordon to handle Release Notes page in the wiki * **UNASSIGNED** * eedri to add Java7 test to jenkins People Present (lines said) --------------------------- * oschreib (49) * lh (14) * sgordon (10) * lpeer (7) * doron (5) * danken (5) * diederich (4) * eedri_mtg (3) * ovirtbot (2) * ovedo (1) * RobertM (1) * jb_netapp (1) * itamar1 (1) * cctrieloff (1) * masayag (1) * doronf_ (1) * ofrenkel (1) * dustins (1) Generated by `MeetBot`_ 0.1.4 .. _`MeetBot`: http://wiki.debian.org/MeetBot Regards, -- Ofer Schreiber oVirt Release Manage

1 0

[Users] Agenda for Weekly Sync - 2012-05-02
by Mike Burns 02 May '12

02 May '12

This is the agenda for the 2012-05-02 meeting: * Status of Next Release * Sub-project reports (engine, vdsm, node) * Review decision on Java 7 and Fedora jboss rpms in oVirt Engine * Upcoming workshops I won't be around to run the meeting this week, so someone else will need to do that. For Node sub-project status: * Starting work on F17 related stuff this week * Should be ready for May 31 Freeze

1 0

[Users] Encouraging this project
by Dominic Kaiser 02 May '12

02 May '12

I would like to share what a pleasure it has been to work with the community and use ovirt as my virtualization platform. I thank all the developers at Red Hat and individuals that make this possible. I have been using 3.0 for about 7 months now and love it. I was using ESXi and while did not have a large problem with it I have always wanted to use KVM as my main platform for virtualization. This made the move easy and the community is great! Hats off to you all and look forward to this platform for a long time. I have 10 hosts with 15 storage nodes. Thanks, -- Dominic Kaiser Greater Boston Vineyard Director of Operations cell: 617-230-1412 fax: 617-252-0238 email: dominic(a)bostonvineyard.org

2 1

[Users] Multipathing iSCSI
by Rene Rosenberger 02 May '12

02 May '12

--_000_124A789298C5DE4887065734070AD3D23165AEA1IAD2MBX18mex02m_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hi, can someone explain how to setup iscsi multipathing with ovirt nodes? We ha= ve a SAN with 2 Controllers. On each Controller we have 4 NICs. We want to = use same subnet for all 8 NICs. Is there a documentation somewhere? Regards, rene --_000_124A789298C5DE4887065734070AD3D23165AEA1IAD2MBX18mex02m_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"><head><META HTTP-EQUIV=3D"Content-Type" CONTENT= =3D"text/html; charset=3Dus-ascii"><meta name=3DProgId content=3DWord.Docum= ent><meta name=3DGenerator content=3D"Microsoft Word 14"><meta name=3DOrigi= nator content=3D"Microsoft Word 14"><link rel=3DFile-List href=3D"cid:filel= ist.xml(a)01CD285F.EBB53D20"><style></style></head><body lang=3DDE link=3Dblue vlink= =3Dpurple style=3D'tab-interval:35.4pt'><div class=3DWordSection1><p class= =3DMsoNormal><span style=3D'mso-ascii-font-family:Calibri;mso-hansi-font-fa= mily:Calibri;color:#404040'>Hi,<o:p></o:p></span></p><p class=3DMsoNormal><= span style=3D'mso-ascii-font-family:Calibri;mso-hansi-font-family:Calibri;c= olor:#404040'><o:p> </o:p></span></p><p class=3DMsoNormal><span lang= =3DEN-US style=3D'mso-ascii-font-family:Calibri;mso-hansi-font-family:Calib= ri;color:#404040;mso-ansi-language:EN-US'>can someone explain how to setup = <span class=3DSpellE>iscsi</span> <span class=3DSpellE>multipathing</span> = with <span class=3DSpellE>ovirt</span> nodes? We have a SAN with 2 Controll= ers. On each Controller we have 4 NICs. We want to use same subnet for all = 8 NICs. Is there a documentation somewhere?<o:p></o:p></span></p><p class= =3DMsoNormal><span lang=3DEN-US style=3D'mso-ascii-font-family:Calibri;mso-= hansi-font-family:Calibri;color:#404040;mso-ansi-language:EN-US'><o:p>&nbsp= ;</o:p></span></p><p class=3DMsoNormal><span lang=3DEN-US style=3D'mso-asci= i-font-family:Calibri;mso-hansi-font-family:Calibri;color:#404040;mso-ansi-= language:EN-US'>Regards, <span class=3DSpellE>rene</span><o:p></o:p></span>= </p><p class=3DMsoNormal><span lang=3DEN-US style=3D'mso-ascii-font-family:= Calibri;mso-hansi-font-family:Calibri;color:#404040;mso-ansi-language:EN-US= '><o:p> </o:p></span></p><p class=3DMsoNormal><span lang=3DEN-US style= =3D'mso-ansi-language:EN-US'><o:p> </o:p></span></p></div></body></htm= l>= --_000_124A789298C5DE4887065734070AD3D23165AEA1IAD2MBX18mex02m_--

1 0

[Users] Call for Agenda Items -- oVirt Weekly Meeting 2012-05-02
by Mike Burns 02 May '12

02 May '12

Any agenda items for this week? Currently on the agenda: * Status of Next Release * Sub-project reports (engine, vdsm, node) * Review decision on Java 7 and Fedora jboss rpms in oVirt Engine * Upcoming workshops Also, I will not be able to attend this meeting, so if someone else can run it, I would appreciate it. Thanks Mike

3 6

[Users] request for WOL
by Gary Scarborough 01 May '12

01 May '12

I would like to request Wake on LAN support be added to the Power Management interface. It seems like a good fall back for anyone who doesn't have proper power management capabilities. -- Gary Scarborough IST Lab Manager Rochester Institute of Technology Rochester NY

3 3

[Users] oVirt/Quantum Integration ideas
by Gary Kotton 01 May '12

01 May '12

Hi, Any comments or input would be greatly appreciated. ovirt.org/wiki/Quantum_and_oVirt Thanks Gary

1 0