[ANN] oVirt 3.5 Second Test Day - Today Jul 29th
by Sandro Bonazzola
Hi all,
Today Jul 29th we'll have oVirt 3.5.0 second test day.
On this day all relevant engineers will be online ready to support
any issues you find during install / operating this new release.
Just make sure you have 1 host or more to test drive the new release.
If you're curious to see how it works, this is your chance.
Thanks again for everyone who will join us today!
Location
#ovirt irc channel
Please communicate here to allow others to see any issues
What
In this test day you have a license to kill ;)
Follow the documentation to setup your environment, and test drive the new features.
Please remember we expect to see some issues, and anything you come up with will save you when you'll install final release
Remember to try daily tasks you'd usually do in the engine, to see there are no regressions.
Write down the configuration you used (HW, console, etc) in the report etherpad[1].
Documentation
Release notes: http://www.ovirt.org/OVirt_3.5_Release_Notes
Features pages links: http://bit.ly/17qBn6F
If you find errors in the wiki please annotate it as well in report etherpad [1]
Prerequisites / recommendations
Use CentOS or RHEL 6.5 only. 6.4 is unsupported due to various issues (sanlock, libvirt, etc).
Use Fedora 19 or 20.
Latest RPMs
repository to be enabled for testing the release are listed in the release notes page [2].
NEW issues / reports
For any new issue, please update the reports etherpad [1]
Feature owners, please make sure:
your feature is updated and referenced on release page [2].
you have testing instruction for your feature either on test day page [3] or in your feature page.
your team regression testing section is organized and up to date on test day page [3].
[1] http://etherpad.ovirt.org/p/3.5-testday-2
[2] http://www.ovirt.org/OVirt_3.5_Release_Notes
[3] http://www.ovirt.org/OVirt_3.5_TestDay
Thanks.
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
10 years, 4 months
[ANN] oVirt 3.5 Second Test Day - Tomorrow Jul 29th
by Sandro Bonazzola
Hi all,
Tomorrow Jul 29th we'll have oVirt 3.5.0 second test day.
On this day all relevant engineers will be online ready to support
any issues you find during install / operating this new release.
Just make sure you have 1 host or more to test drive the new release.
If you're curious to see how it works, this is your chance.
Thanks again for everyone who will join us tomorrow!
Location
#ovirt irc channel
Please communicate here to allow others to see any issues
What
In this test day you have a license to kill ;)
Follow the documentation to setup your environment, and test drive the new features.
Please remember we expect to see some issues, and anything you come up with will save you when you'll install final release
Remember to try daily tasks you'd usually do in the engine, to see there are no regressions.
Write down the configuration you used (HW, console, etc) in the report etherpad[1].
Documentation
Release notes: http://www.ovirt.org/OVirt_3.5_Release_Notes
Features pages links: http://bit.ly/17qBn6F
If you find errors in the wiki please annotate it as well in report etherpad [1]
Prerequisites / recommendations
Use CentOS or RHEL 6.5 only. 6.4 is unsupported due to various issues (sanlock, libvirt, etc).
Use Fedora 19 or 20.
Latest RPMs
repository to be enabled for testing the release are listed in the release notes page [2].
NEW issues / reports
For any new issue, please update the reports etherpad [1]
Feature owners, please make sure:
your feature is updated and referenced on release page [2].
you have testing instruction for your feature either on test day page [3] or in your feature page.
your team regression testing section is organized and up to date on test day page [3].
[1] http://etherpad.ovirt.org/p/3.5-testday-2
[2] http://www.ovirt.org/OVirt_3.5_Release_Notes
[3] http://www.ovirt.org/OVirt_3.5_TestDay
Thanks.
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
10 years, 4 months
[ANN] oVirt 3.5 Second Test Day - Tomorrow Jul 29th
by Sandro Bonazzola
Hi all,
Tomorrow Jul 29th we'll have oVirt 3.5.0 second test day.
On this day all relevant engineers will be online ready to support
any issues you find during install / operating this new release.
Just make sure you have 1 host or more to test drive the new release.
If you're curious to see how it works, this is your chance.
Thanks again for everyone who will join us tomorrow!
Location
#ovirt irc channel
Please communicate here to allow others to see any issues
What
In this test day you have a license to kill ;)
Follow the documentation to setup your environment, and test drive the new features.
Please remember we expect to see some issues, and anything you come up with will save you when you'll install final release
Remember to try daily tasks you'd usually do in the engine, to see there are no regressions.
Write down the configuration you used (HW, console, etc) in the report etherpad[1].
Documentation
Release notes: http://www.ovirt.org/OVirt_3.5_Release_Notes
Features pages links: http://bit.ly/17qBn6F
If you find errors in the wiki please annotate it as well in report etherpad [1]
Prerequisites / recommendations
Use CentOS or RHEL 6.5 only. 6.4 is unsupported due to various issues (sanlock, libvirt, etc).
Use Fedora 19 or 20.
Latest RPMs
repository to be enabled for testing the release are listed in the release notes page [2].
NEW issues / reports
For any new issue, please update the reports etherpad [1]
Feature owners, please make sure:
your feature is updated and referenced on release page [2].
you have testing instruction for your feature either on test day page [3] or in your feature page.
your team regression testing section is organized and up to date on test day page [3].
[1] http://etherpad.ovirt.org/p/3.5-testday-2
[2] http://www.ovirt.org/OVirt_3.5_Release_Notes
[3] http://www.ovirt.org/OVirt_3.5_TestDay
Thanks.
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
10 years, 4 months
[ANN] oVirt 3.5 Second Test Day - Tomorrow Jul 29th
by Sandro Bonazzola
Hi all,
Tomorrow Jul 29th we'll have oVirt 3.5.0 second test day.
On this day all relevant engineers will be online ready to support
any issues you find during install / operating this new release.
Just make sure you have 1 host or more to test drive the new release.
If you're curious to see how it works, this is your chance.
Thanks again for everyone who will join us tomorrow!
Location
#ovirt irc channel
Please communicate here to allow others to see any issues
What
In this test day you have a license to kill ;)
Follow the documentation to setup your environment, and test drive the new features.
Please remember we expect to see some issues, and anything you come up with will save you when you'll install final release
Remember to try daily tasks you'd usually do in the engine, to see there are no regressions.
Write down the configuration you used (HW, console, etc) in the report etherpad[1].
Documentation
Release notes: http://www.ovirt.org/OVirt_3.4.0_release_notes
Features pages links: http://bit.ly/17qBn6F
If you find errors in the wiki please annotate it as well in report etherpad [1]
Prerequisites / recommendations
Use CentOS or RHEL 6.5 only. 6.4 is unsupported due to various issues (sanlock, libvirt, etc).
Use Fedora 19 or 20.
Latest RPMs
repository to be enabled for testing the release are listed in the release notes page [2].
NEW issues / reports
For any new issue, please update the reports etherpad [1]
Feature owners, please make sure:
your feature is updated and referenced on release page [2].
you have testing instruction for your feature either on test day page [3] or in your feature page.
your team regression testing section is organized and up to date on test day page [3].
[1] http://etherpad.ovirt.org/p/3.5-testday-2
[2] http://www.ovirt.org/OVirt_3.5_Release_Notes
[3] http://www.ovirt.org/OVirt_3.5_TestDay
Thanks.
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
10 years, 4 months
[ANN] oVirt 3.5.0 Second Beta is now available for testing
by Sandro Bonazzola
The oVirt team is pleased to announce that the 3.5.0 Second Beta is now
available for testing as of Jul 21th 2014.
The beta is available now for Fedora 19, Fedora 20 and Red Hat Enterprise Linux 6.5
(or similar).
Feel free to join us testing it on Tue Jul 29th second test day!
This release of oVirt includes numerous bug fixes.
See the release notes [1] for a list of the new features and bugs fixed.
The existing repository ovirt-3.5-pre has been updated for delivering this
release without the need of enabling any other repository.
Please refer to release notes [1] for Installation / Upgrade instructions.
New oVirt Live, oVirt Guest Tools and oVirt Node ISO will be available soon as well[2].
Please note that mirrors may need a couple of days before being synchronized.
If you want to be sure to use latest rpms and don't want to wait for the mirrors,
you can edit /etc/yum.repos.d/ovirt-3.5.repo commenting the mirror line and
removing the comment on baseurl line.
[1] http://www.ovirt.org/OVirt_3.5_Release_Notes
[2] http://resources.ovirt.org/pub/ovirt-3.5-pre/iso/
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
10 years, 5 months
[ANN] oVirt 3.4.3 Release is now available
by Sandro Bonazzola
The oVirt development team is pleased to announce the general
availability of oVirt 3.4.3 as of Jul 18th 2014. This release
solidifies oVirt as a leading KVM management application and open
source alternative to VMware vSphere.
oVirt is available now for Fedora 19 and Red Hat Enterprise Linux 6.5
(or similar).
This release of oVirt includes numerous bug fixes.
See the release notes [1] for a list of the new features and bugs fixed.
The existing repository ovirt-3.4 has been updated for delivering this
release without the need of enabling any other repository, however since we
introduced package signing you need an additional step in order to get
the public keys installed on your system if you're upgrading from an older release.
Please refer to release notes [1] for Installation / Upgrade instructions.
Please note that mirrors will need a couple of days before being synchronized.
If you want to be sure to use latest rpms and don't want to wait for the mirrors,
you can edit /etc/yum.repos.d/ovirt-3.4.repo commenting the mirror line and
removing the comment on baseurl line.
A new oVirt Live ISO will be available too[2].
[1] http://www.ovirt.org/OVirt_3.4.3_Release_Notes
[2] http://resources.ovirt.org/pub/ovirt-3.4/iso/ovirt-live-el6-3.4.3.iso
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
10 years, 5 months