April 2012 - Users - oVirt List Archives

[Users] REST API query syntax
by Hui Kai Ran 26 Apr '12

26 Apr '12

Hi, all I learned some query language from "REST API User Guid" to get a reduced result list, for example: /api/storagedomains?search=name%3D*iso* it works. but the following querys do not work /api/storagedomains?search=type%3Diso /api/storagedomains?search=id%3D3f00108a-5c0e-4723-aa88-0013773bf122 /api/vms?search=display.type%3Dvnc I don't know what is the difference between them, and which property can be act as the part of query ? thanks!

2 1

[Users] ovirt and NAT/Internal Networks
by Dead Horse 25 Apr '12

25 Apr '12

I have tried to create a NAT network within ovirt for guests to use via libvirt/virsh as the vdsm@rhevh on an ovirt node. Something like this: virsh # net-info nat Name nat UUID b09d09a8-ebbd-476d-9045-e66012c9e83d Active: yes Persistent: yes Autostart: yes Bridge: natbr0 virsh # net-list --all Name State Autostart ----------------------------------------- nat active yes vdsm-natbr0 active yes vdsm-ovirtmgmt active yes virsh # virsh # net-edit nat <network> <name>nat</name> <uuid>b09d09a8-ebbd-476d-9045-e66012c9e83d</uuid> <forward mode='nat'/> <bridge name='natbr0' stp='on' delay='0' /> <mac address='52:54:00:9D:82:DE'/> <ip address='192.168.122.1' netmask='255.255.255.0'> <dhcp> <range start='192.168.122.2' end='192.168.122.254' /> </dhcp> </ip> </network> Set net.ipv4.ip_forward = 1 in sysctl.conf This is basically the default libvirt NAT network. Connecting a VM directly to it via cli (qemu-kvm) works perfectly fine on the ovirt host itself but the ovirt manager UI does not seem to pick up on it or allow for creation of such a network for guests to use. Since the ovirt manager UI did not allow I dug into the database and added entries which seem to have been necessary by hand to the following engine database tables: table: network table: network_cluster table: vds_interface table: vds_interface_statistics The result was the network did show up under cluster logical networks. However the network still does not show up under the host Network Interfaces UI. Was able to create VM and attach the natbr0 network to it and NAT was indeed working. (EG: DNSmasq assigned address). The guest was able to communicate out and without extensive testing things seemed to work. This was very painful to do (and hacky). Thus it would be very nice if since this is OOB functionality of libvirt/KVM, if ovirt would allow for it to be used. The ability to provide NAT or internal networks to guests would quite useful. - DHC

1 1

[Users] modifying a template
by Nathanaël Blanchet 25 Apr '12

25 Apr '12

please, anyone can tell me if it is possible to modify a template instead of making a new one? -- Nathanaël Blanchet Supervision réseau Pôle exploitation et maintenance Département des systèmes d'information 227 avenue Professeur-Jean-Louis-Viala 34193 MONTPELLIER CEDEX 5 Tél. 33 (0)4 67 54 84 55 Fax 33 (0)4 67 54 84 14 blanchet(a)abes.fr

3 2

[Users] error in multipath.py
by ovirt＠qip.ru 25 Apr '12

25 Apr '12

This is a message in Mime Format. If you see this, your mail reader does not support this format. --=_91fd0f08b02702441c6196499d1fd3c4 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: quoted-printable i tried the latest releases of vdsm from jenkins.ovirt.org, but found t= hat they did'n work. Vdsmd cycles and corrupted my multipath.conf. =0A= =0Aerror is in =0A=0A/usr/share/vdsm/storage/multipath.py=0A=0Athis is t= he diff with my py=0A=0A# diff multipath.py.bad multipath.py=0A88,89c88,= 89=0A< first =3D mpathconf[0]=0A< second =3D mpa= thconf[1]=0A---=0A> first =3D mpathconf.split('\n', 1)[0]=0A= > second =3D mpathconf.split('\n', 1)[1]=0A=0A-- --=_91fd0f08b02702441c6196499d1fd3c4 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable i tried the latest releases of vdsm from je= nkins.ovirt= .org,  but found that they did'n work. Vdsmd cycles and corrupted my multipath.conf. error is in /<span= id=3D"nicSpell_6" class=3D"nicSpellWord">usr/share/vdsm/storage/multipath.py this is the diff= with my py # diff multipath.py.bad multipath.py 88,89c88,89 <    &nbsp= ;        first =3D mpathconf[0] <  &nb= sp;          second =3D mpa= thconf[1] ---<= br>>          &nbsp= ;  first =3D mpathc= onf.split('\n', 1)[0] >      =        second =3D mpathconf.split('\n', 1)[1] <b= r> -- --=_91fd0f08b02702441c6196499d1fd3c4--

3 3

[Users] Can't install engine from latest jenkins build
by ovirt＠qip.ru 25 Apr '12

25 Apr '12

This is a message in Mime Format. If you see this, your mail reader does not support this format. --=_98c0eda2d660bf3a9af71966c1d3d7a3 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: quoted-printable during engine-setup=0A=0Aerror in step=0A=0ACreating Database... = [ ERROR ]=0A=0A#tail engine-db-install-2012_0= 4_22_23_03_50.log=0ACreating stored procedures from audit_log_sp.sql ...= =0ACreating stored procedures from base_disks_sp.sql ...=0ACreating stor= ed procedures from bookmarks_sp.sql ...=0ACreating stored procedures fro= m business_entity_snapshot_sp.sql ...=0ACreating stored procedures from= common_sp.sql ...=0ACreating stored procedures from custom_actions_sp.s= ql ...=0ACreating stored procedures from disk_image_dynamic_sp.sql ...= =0ACreating stored procedures from disk_lun_map_sp.sql ...=0ACreating st= ored procedures from disks_sp.sql ...=0Apsql:disks_sp.sql:93: ERROR: ty= pe "disks" does not exist=0A=0A-- --=_98c0eda2d660bf3a9af71966c1d3d7a3 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable during engine-setup error in step Creating Database...&nbs= p;           &nbs= p;           &nbs= p;         [ ERROR ] #tai= l engine-db-install-2012_04_22_23_03_50.log Creating stored procedure= s from audit_log_sp.sql ... Creating stored procedures from base_disk= s_sp.sql ... Creating stored procedures from bookmarks_sp.sql ... = Creating stored procedures from business_entity_snapshot_sp.sql ... C= reating stored procedures from common_sp.sql ... Creating stored proc= edures from custom_actions_sp.sql ... Creating stored procedures from= disk_image_dynamic_sp.sql ... Creating stored procedures from disk_l= un_map_sp.sql ... Creating stored procedures from disks_sp.sql ...<br= >psql:disks_sp.sql:93: ERROR:  type "disks" does not exist <= br> -- --=_98c0eda2d660bf3a9af71966c1d3d7a3--

2 3

[Users] can't get VM working (no ISO images, no Console)
by Frank Wall 24 Apr '12

24 Apr '12

Hi, I've setup a test instance of ovirt like this... - setup ovirt engine on Fedora 16 using yum (ovirt-engine-3.0.0_0001-1.6.fc16.x86_64) - setup ovirt node "ovirt-node1" using the ISO image ovirt-node-iso-2.3.0-1.0.fc16.iso - created a new datacenter with NFS storage ("datacenter2") - created a new cluster ("cluster2") - added ovirt node "ovirt-node1" to cluster "cluster2" - created an NFS storage for virtual machines ("nfs_storage1") - created an NFS storage for ISO images ("iso_images1") - created a new VM on "cluster2" with disk space provided by "nfs_storage1" ...but I fail to get any VM working. First of all, I've uploaded an ISO image with the iso-uploader. I can verify that it was uploaded successfully: [root@ovirt-engine ~]# engine-iso-uploader -v -i iso_images1 upload FreeBSD-8.2-RELEASE-amd64-disc1.iso Please provide the REST API password for the admin@internal oVirt Engine user (CTRL+D to abort): DEBUG: URL is https://ovirt-engine.EXAMPLE.COM:8443/api/storagedomains?search=name%3Diso_… DEBUG: Returned XML is <?xml version="1.0" encoding="UTF-8" standalone="yes"?> <storage_domains> <storage_domain href="/api/storagedomains/b2d11688-84ce-40ef-b10f-f036ac806cf9" id="b2d11688-84ce-40ef-b10f-f036ac806cf9"> <name>iso_images1</name> <link href="/api/storagedomains/b2d11688-84ce-40ef-b10f-f036ac806cf9/permissions" rel="permissions"/> <link href="/api/storagedomains/b2d11688-84ce-40ef-b10f-f036ac806cf9/files" rel="files"/> <type>iso</type> <master>false</master> <storage> <type>nfs</type> <address>192.168.200.108</address> <path>/mnt/iso1</path> </storage> <available>15032385536</available> <used>3221225472</used> <committed>0</committed> <storage_format>v1</storage_format> </storage_domain> </storage_domains> DEBUG: id=b2d11688-84ce-40ef-b10f-f036ac806cf9 address=192.168.200.108 path=/mnt/iso1 DEBUG: local NFS mount point is /tmp/tmpxG6M3H DEBUG: NFS mount command (/bin/mount -t nfs -o rw,sync,soft 192.168.200.108:/mnt/iso1 /tmp/tmpxG6M3H) DEBUG: /bin/mount -t nfs -o rw,sync,soft 192.168.200.108:/mnt/iso1 /tmp/tmpxG6M3H DEBUG: _cmds(['/bin/mount', '-t', 'nfs', '-o', 'rw,sync,soft', '192.168.200.108:/mnt/iso1', '/tmp/tmpxG6M3H']) DEBUG: returncode(0) DEBUG: STDOUT() DEBUG: STDERR() ERROR: FreeBSD-8.2-RELEASE-amd64-disc1.iso exists on 192.168.200.108. Either remove it or supply the --force option to overwrite it. DEBUG: /bin/umount -t nfs -f /tmp/tmpxG6M3H DEBUG: /bin/umount -t nfs -f /tmp/tmpxG6M3H DEBUG: _cmds(['/bin/umount', '-t', 'nfs', '-f', '/tmp/tmpxG6M3H']) DEBUG: returncode(0) DEBUG: STDOUT() DEBUG: STDERR() Still I am unable to select the ISO image from the VM configuration menu, the "change CD" function doesn't show the ISO image either. Besides that my test VM is in status "Up", but I can't select the "console" option, it is grayed out. So maybe you can advise me how to get the first test VM working. I'd like to continue with further tests as soon as possible :-) Thanks - Frank

2 1

[Users] UPDATE: oVirt 3.1 release date changed
by Ofer Schreiber 24 Apr '12

24 Apr '12

Due to multiple integration issues (Java 7, Fedora 17 and JBoss official rpm support) we've decided to postpone the next release of oVirt [1] to June 27th. This one month delay will hopefully give us enough time to stabilize all the different layers of oVirt, and produce a better release. Stay tuned, -- Ofer Schreiber oVirt Release Manager [1] http://www.ovirt.org/wiki/Second_Release

1 0

[Users] oVirt Weekly Sync Meeting - 2012-04-24
by Mike Burns 24 Apr '12

24 Apr '12

Minutes: http://ovirt.org/meetings/ovirt/2012/ovirt.2012-04-24-14.00.html Minutes (text): http://ovirt.org/meetings/ovirt/2012/ovirt.2012-04-24-14.00.txt Log: http://ovirt.org/meetings/ovirt/2012/ovirt.2012-04-24-14.00.log.html ========================= #ovirt: oVirt Weekly Sync ========================= Meeting started by mburns at 14:00:30 UTC. The full logs are available at http://ovirt.org/meetings/ovirt/2012/ovirt.2012-04-24-14.00.log.html . Meeting summary --------------- * Agenda and Roll Call (mburns, 14:00:47) * LINK: http://www.ovirt.org/wiki/Meetings#Weekly_project_sync_meeting (mburns, 14:02:59) * Next Release Status (mburns, 14:03:47) * feature freeze is April 30 (mburns, 14:04:54) * AGREED: move release to 2012-06-30 and feature freeze to 2012-05-31 (mburns, 14:13:41) * test day will move out as well (mburns, 14:15:57) * AGREED: release date June 27, possible slip to Jul 2 (mburns, 14:20:26) * AGREED: target May 15 for alpha release (mburns, 14:23:51) * ACTION: oschreib to send notification of release date change to arch@ users@ board@ (mburns, 14:25:31) * AGREED: alpha testing is on F17 RC (mburns, 14:28:23) * java 7, f17 and jboss rpms (mburns, 14:32:11) * we're trying to use F17 with java 7 and distro specific jboss rpms where available (mburns, 14:32:39) * AGREED: Fedora 17 support is a blocker (mburns, 14:34:54) * AGREED: using distro jboss rpms is not a blocker, but is a goal (mburns, 14:38:37) * we should re-evaluate if we're going to miss using distro jboss rpms (mburns, 14:39:19) * if small delay, we may choose to slip the release to get it in (mburns, 14:39:39) * ACTION: mburns to add fedora jboss and java 7 to agenda to re-evaluate (mburns, 14:43:11) * AGREED: java 7 is a goal, will re-evaluate for blocker status on the next meeting (mburns, 14:44:08) * Upcoming workshops (mburns, 14:44:42) * one-day workshops added at LC Japan, NA, Europe (mburns, 14:45:49) * LINK: http://lists.ovirt.org/pipermail/arch/2012-April/000528.html (mburns, 14:47:51) * Signed-off-by (mburns, 15:04:11) * enabled in ovirt-node and ovirt-node-iso (mburns, 15:04:28) * AGREED: all projects will require signed-off-by starting may 1st (mburns, 15:06:31) * LINK: http://kerneltrap.org/files/Jeremy/DCO.txt (mburns, 15:09:28) * sub-project status (mburns, 15:10:38) * node should be good with new dates, only major tasks left are stability and f17 testing which are starting this week (mburns, 15:11:18) * Other Topics (mburns, 15:12:45) * Next Week's Meeting is Wednesday 2012-05-01 at 14:00 UTC (10:00 AM EDT) (mburns, 15:14:02) Meeting ended at 15:14:43 UTC. Action Items ------------ * oschreib to send notification of release date change to arch@ users@ board@ * mburns to add fedora jboss and java 7 to agenda to re-evaluate Action Items, by person ----------------------- * mburns * mburns to add fedora jboss and java 7 to agenda to re-evaluate * oschreib * oschreib to send notification of release date change to arch@ users@ board@ * **UNASSIGNED** * (none) People Present (lines said) --------------------------- * mburns (138) * itamar (58) * oschreib (27) * lh (26) * lpeer (22) * doronf (22) * cctrieloff (21) * aglitke_ (8) * ovirtbot (6) * jb_netapp (5) * miki (4) * rharper (4) * quaid (4) * bazulay (3) * masayag (2) * sgordon (2) * aliguori (1) * jhernand (1) * ofrenkel (1) * dustins (1) Generated by `MeetBot`_ 0.1.4 .. _`MeetBot`: http://wiki.debian.org/MeetBot

1 0

[Users] Planning oVirt Workshops
by Leslie Hawthorn 24 Apr '12

24 Apr '12

(N.B.: This message was copied to users(a)ovirt.org but I am not clear if my subscription was approved. If you happen to note that this message did not get to that list, let me know.) Hello everyone, I am a new(ish) hire at Red Hat working on Carl Trieloff's team. I will be attending tomorrow's oVirt IRC meeting to provide an update on upcoming oVirt workshops, but in the interim wanted to circulate a proposed agenda. Please note that we're planning one day workshops at LinuxCon Japan, North America and Europe, as well as a 2 day workshop at NetApp HQ in California (target date 8 and 9th August 2012). As we're discussing workshop agendas for the one day events, it would be good to have an idea of what we'd like to present given the additional day. Here is a *very* preliminary agenda: - intro & arch - engine, vdsm deep dives - storage roadmap/discussion - network roadmap/discussion Open Questions: 1) What other topics should be covered during the workshop? 2) Who would like to volunteer to be an instructor? Cheers, LH -- Leslie Hawthorn Community Action and Impact Open Source and Standards @ Red Hat identi.ca/lh twitter.com/lhawthorn

4 3

[Users] rhev-guest for el5 and el5 derived
by Nathanaël Blanchet 24 Apr '12

24 Apr '12

This is a multi-part message in MIME format. --------------080809040709030500060800 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8bit Hello, I need to make rhev-agent work mainly on centos 5. For centos 6 it's easy, because we can directly find SRPMS on redhat ftp. So I tried many ways to build it on my own: 1. git clone git://gerrit.ovirt.org/ovirt-guest-agent and ./autogen.sh. It claims "Autoconf version 2.63 or higher is required" but rhel 5 autoconf version is 2.59" 2. rpm -bb ovirt-guest-agent.spec.The issue is that I'm running i386 instead of an expected i686. If I change this required value in the SPEC file by doing "ExclusiveArch: i686 x86_64 i386 ", it complains then : "Group field must be present in the package: ovirt-guest-agent-pam-module". I'm stuck in any ways, It's a pity that rhel5x is the most used rhel system... -- Nathanaël Blanchet Supervision réseau Pôle exploitation et maintenance Département des systèmes d'information 227 avenue Professeur-Jean-Louis-Viala 34193 MONTPELLIER CEDEX 5 Tél. 33 (0)4 67 54 84 55 Fax 33 (0)4 67 54 84 14 blanchet(a)abes.fr --------------080809040709030500060800 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body bgcolor="#FFFFFF" text="#000000"> Hello, I need to make rhev-agent work mainly on centos 5. For centos 6 it's easy, because we can directly find SRPMS on redhat ftp. So I tried many ways to build it on my own: <ol> <li> git clone git://gerrit.ovirt.org/ovirt-guest-agent and ./autogen.sh. It claims  "Autoconf version 2.63 or higher is required" but rhel 5 autoconf version is 2.59"</li> <li>rpm -bb ovirt-guest-agent.spec.The issue is that I'm running i386 instead of an expected i686. If I change this required value in the SPEC file by doing "ExclusiveArch: i686 x86_64 i386 ", it complains then : "Group field must be present in the package: ovirt-guest-agent-pam-module".</li> </ol> I'm stuck in any ways,  It's a pity that rhel5x is the most used rhel system... <pre class="moz-signature" cols="72">-- Nathanaël Blanchet Supervision réseau Pôle exploitation et maintenance Département des systèmes d'information 227 avenue Professeur-Jean-Louis-Viala 34193 MONTPELLIER CEDEX 5 Tél. 33 (0)4 67 54 84 55 Fax 33 (0)4 67 54 84 14 <a class="moz-txt-link-abbreviated" href="mailto:blanchet@abes.fr">blanchet(a)abes.fr</a> </pre> </body> </html> --------------080809040709030500060800--

2 1

[Users] Agenda for oVirt Weekly Sync 2012-04-24
by Mike Burns 24 Apr '12

24 Apr '12

The latest agenda will always be online[1]. * Status of Next Release * Sub-project reports (engine, vdsm, node) * Signed-off-by in commit tag check-up (rharper) * Java 7 in oVirt Engine (oschreib) * ovirt-engine-jbossas vs. Fedora17-jbossas (oschreib) * Moving to Fedora 17 (oschreib) * Do we need to re-evaluate release date based on above 3 items? (itamar) * Upcoming workshops * Topics * Dates/Events * Hardware availability for automated testing (mburns) * Would be good to have board members from sponsor companies available for this discussion [1] http://www.ovirt.org/wiki/Meetings#Weekly_project_sync_meeting

1 0

[Users] Call for agenda topics -- Weekly Sync 2012-04-24
by Mike Burns 23 Apr '12

23 Apr '12

Reminder: Meeting moved this week to Tuesday 2012-04-24 due to Israel Independence Day. This mail is a call for topics for the 2012-04-24 Weekly Sync meeting. Standing Agenda Topics: * Status of Next Release * Sub-project reports (engine, vdsm, node) Other topics that need to be covered this week: * Additional Hardware resources for Jenkins use If you have additional topics, please reply to this email with the topic(s) you want to cover. A final planned agenda will be sent out prior to the meeting. Thanks The oVirt Team

4 3

[Users] locale en_AU
by Jason Lawer 23 Apr '12

23 Apr '12

I just tried to run engine-setup and got the following error. [root@manager ~]# engine-setup Error: current locale (en_AU.UTF-8) is not supported. supported locales are: en_US.UTF-8,en_US.utf-8,en_US.utf8 Please check log file /var/log/ovirt-engine/engine-setup_2012_04_23_09_07_53.log for more information While I can easily change the locale settings on the box, I really think this is a bit of a crazy limitation as almost every other bit of software seems to assume en_AU = en_US as almost no software ends up creating an Australian localization for it. The character set is the same, the keyboards are the same, and I can't see any reason why en_AU (or say en_NZ) would cause a problem. The only differences I can think of are dates (DD/MM/YYYY vs MM/DD/YYYY) and the metric system. What would need to be the process to fix this? Is this just because no one has been willing to test or it is a policy? Jason

2 3

[Users] fedora qemu modern CPU recognition issues cause ovirt manged host to go non-operational
by Dead Horse 23 Apr '12

23 Apr '12

Seeing an issue wherein ovirt moves a managed host to non-operational state. This occurs with the currently released version of ovirt and the latest development builds. The ovirt host is loaded with Fedora core 16 and equipped with most current development version of the vdsm. *Editorial node* The latest vdsm to work on the FC16 host required building and adding newer versions of the sanlock, libvirt, lvm2 and device-mapper packages than what FC16 provides. Ultimately however none of the newer packages have any bearing on this failure mode. The failure mode is as follows. Upon successfully adding the host and setting the cluster CPU compatibility level oVirt will offline the host with the following message: --> Host ovirtnode moved to Non-Operational state as host does not meet the cluster's minimum CPU level. Missing CPU features : model_Nehalem Under the hood the actual cause of this failure is that qemu is not correctly able to identify the host CPU feature flags. This can be observed by doing: qemu-system-x86_64 -cpu Nehalem,check which fails with: warning: host cpuid 0000_0000 lacks requested flag 'fpu' [0x00000001] warning: host cpuid 0000_0000 lacks requested flag 'de' [0x00000004] and on and on... A simple check of "cat /proc/cpuinfo | grep flags" flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca sse4_1 sse4_2 popcnt lahf_lm ida dts tpr_shadow vnmi flexpriority ept vpid Thus the CPU is more than capable of everything being asked of it via the cpudef for "Nehalem" in /etc/qemu/target-x86_64.conf. This is only an issue on Fedora hosts. RHEL/CentOS/SL hosts work fine. This was recognized as an issue RHEL and fixed there but has not been fixed in Fedora. See: http://wiki.qemu.org/Features/CPUModels#Examples and this: https://bugzilla.redhat.com/show_bug.cgi?format=multiple&id=689665 and this related discussion in qemu-devel: http://www.mail-archive.com/qemu-devel@nongnu.org/msg101360.html Thus is appears that the changes were made to the RHEL qemu (eg: cpu type rhel6) AKA the change one needs to make to the ovirt engine database to have ovirt manage a EL based host. Fedora hosts--> psql -U postgres engine -c "update vdc_options set option_value='pc-0.14' where option_name='EmulatedMachine' and version='3.0';" EL hosts --> psql -U postgres engine -c "update vdc_options set option_value='rhel6.2.0' where option_name='EmulatedMachine' and version='3.0';" Thus at the moment any host loaded with Fedora and manged by oVirt utilizing a Sandy Bridge, Nehalem or Westmere processor will be dead in the water. -DHC

3 3

[Users] Problem with live migration.
by Martin Hovmöller 22 Apr '12

22 Apr '12

I can't live migrate the vm's in my cluster: 012-04-17 04:06:39,728 INFO [org.ovirt.engine.core.bll.MigrateVmCommand] (pool-5-thread-48) Running command: MigrateVmCommand internal: false. Entities affected : ID: ce9bb531-4d2a-4f5e-9935-3c8a4f5db94a Type: VM 2012-04-17 04:06:39,743 INFO [org.ovirt.engine.core.vdsbroker.MigrateVDSCommand] (pool-5-thread-48) START, MigrateVDSCommand(vdsId = f33ffc14-87ba-11e1-b610-e3aeca1e8008, vmId=ce9bb531-4d2a-4f5e-9935-3c8a4f5db94a, srcHost=10.23.30.130, dstVdsId=b4d329b4-87b6-11e1-ac0a-b70ec8cc50f0, dstHost=10.23.30.110:54321, migrationMethod=ONLINE), log id: 7c7201be 2012-04-17 04:06:39,748 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateBrokerVDSCommand] (pool-5-thread-48) VdsBroker::migrate::Entered (vm_guid=ce9bb531-4d2a-4f5e-9935-3c8a4f5db94a, srcHost=10.23.30.130, dstHost=10.23.30.110:54321, method=online 2012-04-17 04:06:39,749 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateBrokerVDSCommand] (pool-5-thread-48) START, MigrateBrokerVDSCommand(vdsId = f33ffc14-87ba-11e1-b610-e3aeca1e8008, vmId=ce9bb531-4d2a-4f5e-9935-3c8a4f5db94a, srcHost=10.23.30.130, dstVdsId=b4d329b4-87b6-11e1-ac0a-b70ec8cc50f0, dstHost=10.23.30.110:54321, migrationMethod=ONLINE), log id: 3c40c2de 2012-04-17 04:06:39,834 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateBrokerVDSCommand] (pool-5-thread-48) FINISH, MigrateBrokerVDSCommand, log id: 3c40c2de 2012-04-17 04:06:39,840 INFO [org.ovirt.engine.core.vdsbroker.MigrateVDSCommand] (pool-5-thread-48) FINISH, MigrateVDSCommand, return: MigratingFrom, log id: 7c7201be 2012-04-17 04:06:42,166 INFO [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (QuartzScheduler_Worker-18) vds::refreshVmList vm id ce9bb531-4d2a-4f5e-9935-3c8a4f5db94a is migrating to vds rhevh1.<domain> ignoring it in the refresh till migration is done [...] 2012-04-17 04:07:33,852 INFO [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (QuartzScheduler_Worker-34) vds::refreshVmList vm id ce9bb531-4d2a-4f5e-9935-3c8a4f5db94a status = Paused on vds rhevh1.<domain> ignoring it in the refresh till migration is done 2012-04-17 04:07:37,407 ERROR [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (QuartzScheduler_Worker-71) Rerun vm ce9bb531-4d2a-4f5e-9935-3c8a4f5db94a. Called from vds rhevh2.<domain> 2012-04-17 04:07:37,414 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateStatusVDSCommand] (pool-5-thread-47) START, MigrateStatusVDSCommand(vdsId = f33ffc14-87ba-11e1-b610-e3aeca1e8008, vmId=ce9bb531-4d2a-4f5e-9935-3c8a4f5db94a), log id: 8dfce1b 2012-04-17 04:07:37,496 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase] (pool-5-thread-47) Failed in MigrateStatusVDS method 2012-04-17 04:07:37,497 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase] (pool-5-thread-47) Error code createErr and error message VDSGenericException: VDSErrorException: Failed to MigrateStatusVDS, error = Error creating the requested virtual machine 2012-04-17 04:07:37,497 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase] (pool-5-thread-47) Command org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateStatusVDSCommand return value Class Name: org.ovirt.engine.core.vdsbroker.vdsbroker.StatusOnlyReturnForXmlRpc mStatus Class Name: org.ovirt.engine.core.vdsbroker.vdsbroker.StatusForXmlRpc mCode 9 mMessage Error creating the requested virtual machine 2012-04-17 04:07:37,497 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase] (pool-5-thread-47) Vds: rhevh2.<domain> 2012-04-17 04:07:37,497 ERROR [org.ovirt.engine.core.vdsbroker.VDSCommandBase] (pool-5-thread-47) Command MigrateStatusVDS execution failed. Exception: VDSErrorException: VDSGenericException: VDSErrorException: Failed to MigrateStatusVDS, error = Error creating the requested virtual machine 2012-04-17 04:07:37,497 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateStatusVDSCommand] (pool-5-thread-47) FINISH, MigrateStatusVDSCommand, log id: 8dfce1b 2012-04-17 04:07:37,528 WARN [org.ovirt.engine.core.bll.MigrateVmCommand] (pool-5-thread-47) CanDoAction of action MigrateVm failed. Reasons:ACTION_TYPE_FAILED_VDS_VM_CLUSTER,VAR__ACTION__MIGRATE,VAR__TYPE__VM There is no problem regarding storage or anything like that. If I shut down the vm I can start it on the other host without any problems whatsoever. Do I need to do something to make live migration work? Trying to dig in the logs on the hypervisors, but there's so much stuff being logged there...

3 9

[Users] Host status non-responsding
by Rahul Upadhyaya 20 Apr '12

20 Apr '12

Hi, While performing some operations (vdsm restart and other operations to debug SSL settings on the host) , my host goes to "non-responding" state. Now it has happened for the third time. For the previous two times I did a engine-cleanup and did a engine-setup to resolve this issue. Is there some other way ... m guessing removing some host entry from database or something to recover faster. On a non-responding host I can't put it to maintenance mode because it says it has running Vms on it... also I cant remove it and add it again, so basically my host is in a state of limbo where I cant perform any operation on it. Is there any other way to recover from such condition other that preforming a engine cleanup and engine-setup again ? -- Regards, Rahul =======================================================

2 1

[Users] Joss fails to start ... Keystore was tampered.
by snmishra＠linux.vnet.ibm.com 19 Apr '12

19 Apr '12

I had jboss running on my rhel6.2 machine. This morning I fetched latest engine source, built and deployed it. I did not see any errors. But now when I start jboss-as service I see following errors in engine.log - 2012-04-18 13:57:48,051 INFO [org.ovirt.engine.core.bll.Backend] (MSC service thread 1-5) Start time: 4/18/12 1:57 PM 2012-04-18 13:57:48,204 ERROR [org.ovirt.engine.core.engineencryptutils.EncryptionUtils] (MSC service thread 1-5) Failed to decryptjava.io.IOException: Keystore was tampered with, or password was incorrect 2012-04-18 13:57:48,204 ERROR [org.ovirt.engine.core.dal.dbbroker.generic.DBConfigUtils] (MSC service thread 1-5) Failed to decrypt value for property LocalAdminPassword will be used encrypted value 2012-04-18 13:57:48,209 WARN [org.ovirt.engine.core.utils.ConfigUtilsBase] (MSC service thread 1-5) Could not find enum value for option: NetConsolePort 2012-04-18 13:57:48,212 ERROR [org.ovirt.engine.core.engineencryptutils.EncryptionUtils] (MSC service thread 1-5) Failed to decryptjava.io.IOException: Keystore was tampered with, or password was incorrect 2012-04-18 13:57:48,212 ERROR [org.ovirt.engine.core.dal.dbbroker.generic.DBConfigUtils] (MSC service thread 1-5) Failed to decrypt value for property CertificatePassword will be used encrypted value 2012-04-18 13:57:48,214 ERROR [org.ovirt.engine.core.engineencryptutils.EncryptionUtils] (MSC service thread 1-5) Failed to decryptjava.io.IOException: Keystore was tampered with, or password was incorrect Regards, Sharad Mishra IBM

2 2

[Users] Request for reschedule oVirt weekly meeting next week
by Ofer Schreiber 19 Apr '12

19 Apr '12

Next oVirt weekly meeting falls on the Israeli independence day eve. Would you mind reschedule it to Tuesday? Thanks, --- Ofer Schreiber oVirt Release Manager

4 3

[Users] Booting oVirt node image 2.3.0, no install option
by Adam vonNieda 19 Apr '12

19 Apr '12

> This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. --B_3417408887_2820352 Content-type: text/plain; charset="US-ASCII" Content-transfer-encoding: 7bit Hi folks, I'm trying to install oVirt node v2.3.0 on A Dell C2100 server. I can boot up just fine, but the two menu options I see are "Start oVirt node", and "Troubleshooting". When I choose "Start oVirt node", it does just that, and I am soon after given a console login prompt. I've checked the docs, and I don't see what I'm supposed to do next, as in a password etc. Am I missing something? Thanks, -Adam --B_3417408887_2820352 Content-type: text/html; charset="US-ASCII" Content-transfer-encoding: quoted-printable <html><head></head><body style=3D"word-wrap: break-word; -webkit-nbsp-mode: s= pace; -webkit-line-break: after-white-space; color: rgb(0, 0, 0); font-size:= 14px; font-family: Calibri, sans-serif; "><div> </div><div>   = Hi folks,</div><div> </div><div>   I'm trying to install oVirt = node v2.3.0 on A Dell C2100 server. I can boot up just fine, but the two men= u options I see are "Start oVirt node", and "Troubleshooting". When I choose= "Start oVirt node", it does just that, and I am soon after given a console = login prompt. I've checked the docs, and I don't see what I'm supposed to do= next, as in a password etc. Am I missing something? </div><div> </d= iv><div>   Thanks,</div><div> </div><div>      -= Adam</div></body></html> --B_3417408887_2820352--

5 13

[Users] Can't create ISO domain
by Li, David 18 Apr '12

18 Apr '12

--_000_A0D5581BE022624487D06FF31DA39EAC6BDE854052csmailcloudsh_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable My ovirt-node host was created and approved in ovirt-engine. I couldn't activate an new ISO domain in the ovirt-engine if it's not exist= ing. It could be attached to the data center though. On the other hand, I = have no problem adding a data domain. How should I debug that? - David --_000_A0D5581BE022624487D06FF31DA39EAC6BDE854052csmailcloudsh_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"><head><meta http-equiv=3DContent-Type content= =3D"text/html; charset=3Dus-ascii"><meta name=3DGenerator content=3D"Micros= oft Word 14 (filtered medium)"><style></style></head><body lang=3DEN-US link=3Dblue vli= nk=3Dpurple><div class=3DWordSection1>My ovirt-node= host was created and approved in ovirt-engine. <o:p></o:p><o:p> </o:p>I couldn't activat= e an new ISO domain in the ovirt-engine if it's not existing. It could be a= ttached to the data center though.  On the other hand, I have no probl= em adding a data domain. <o:p></o:p> How s= hould I debug that?<o:p></o:p> <o:p></o:p><= p class=3DMsoPlainText><o:p> </o:p>- David= <o:p></o:p><o:p> </o:p></div></body></htm= l>= --_000_A0D5581BE022624487D06FF31DA39EAC6BDE854052csmailcloudsh_--

2 3

[Users] Setting up SSL between host and engine
by Rahul Upadhyaya 18 Apr '12

18 Apr '12

Hi, I had issues with the console coming up. Whenever I tried from the Ovirt-CLI to connect to the console, it gave me error while connecting and the logs show that it was looking for a secure connection. I looked up the wiki and tried to setup a no SSL environment , Now that I already gave a lot of try and was not successful in viewing the console, I wanted to setup a secure (SSL) connection between the host and the engine so that I dont face these issues anymore. Can you guide me on steps to setup SSL between the Node and the engine/some link that speaks about it. ? -- Regards, Rahul =======================================================

3 2

Re: [Users] question on storage and host
by Dominic Kaiser 18 Apr '12

18 Apr '12

I for some reason cannot add the ovrit node as iscsi storage. My server sits at 10.3.0.243 and you use port 3260 right? I have added it as a host fine but can not get it to detect iscsi storage. I get: No new devices were found. This may be due to either: incorrect multipath configuration on the Host or wrong address of the iscsi target or a failure to authenticate on the target device. Please consult your Storage Administrator. Like it is not there or blocked. On ovirt node it initializes iscsi automatically right? Thanks, Dominic On Wed, Apr 18, 2012 at 10:33 AM, Itamar Heim <iheim(a)redhat.com> wrote: > On 04/18/2012 05:28 PM, Dominic Kaiser wrote: > >> What I am asking is on one of my nodes I have installed ovirt node it >> has a designated iscsi target on install. Can I use that as a separate >> iscsi storage node? >> > > please cc lists on questions. > you can use it as a storage node as well for shared storage. > local storage is only via local file system > > >> dk >> >> On Sun, Apr 15, 2012 at 3:03 AM, Itamar Heim <iheim(a)redhat.com >> <mailto:iheim@redhat.com>> wrote: >> >> On 04/13/2012 09:37 PM, Dominic Kaiser wrote: >> >> I have a server I want to use that has 8 storage bays and is an >> 8 core >> intel xeon 16 gigs of ram. I want to use the board and >> processors for >> virtual machines and storage separately. First can I do this? >> Second I >> am using ovirt node and it has remote storage iSCSI address >> assignment >> can I do it that way? My main reason is I want to use >> processors and >> storage. >> >> >> not sure i understood the question/use case: >> you can run virtual machines on the host from a remote shared >> storage (nfs, iscsi, etc.) and use the local disks for anything else. >> >> if i didn't answer, please clarify the use case. >> >> >> >> >> -- >> Dominic Kaiser >> Greater Boston Vineyard >> Director of Operations >> >> cell: 617-230-1412 >> fax: 617-252-0238 >> email: dominic(a)bostonvineyard.org <mailto:dominic@**bostonvineyard.org<dominic(a)bostonvineyard.org> >> > >> >> >> > -- Dominic Kaiser Greater Boston Vineyard Director of Operations cell: 617-230-1412 fax: 617-252-0238 email: dominic(a)bostonvineyard.org

2 3

[Users] Powermanagemnet for CMC
by Christian Hernandez 18 Apr '12

18 Apr '12

Has anyone configured the power management for CMC? Some of my Hosts will be in a blade chassis and I don't want to "accidentally" shutdown the wrong blade... Currently this is what I do (for example)... * * *ssh root@blade-cmc racadm serveraction -m server-9 hardreset* The options available to me are... *powerdown - perform server power off powerup - perform server power on powercycle - perform server power cycle hardreset - force hard server power reset graceshutdown - perform graceful shutdown of server powerstatus - display current power status of server* I see the option for "Drac" ...can/should I use that? What would the config look like? --Christian

1 0

[Users] oVirt Weekly Sync Meeting cancelled due to lack of attendence
by Mike Burns 18 Apr '12

18 Apr '12

There was a distinct lack of attendance today at the weekly sync meeting, so we ended without discussing anything. We really need to get people to start attending this meeting so that we can make sure we're still on target for upcoming releases. Thanks Mike

4 5

Re: [Users] Use Filer for NFS storage
by Christian Hernandez 18 Apr '12

18 Apr '12

I think you're right; there was some talk floating around about a patch to a python script. I am going to install 3.0 and see if I still have the same problem On Wed, Apr 18, 2012 at 7:55 AM, Dominic Kaiser <dominic(a)bostonvineyard.org>wrote: > Christian I am running 3.0 not 3.1 so I wonder if it is a bug. Has anyone > else responded to your questions? > > Dominic > > > On Tue, Apr 17, 2012 at 5:14 PM, Christian Hernandez <christianh(a)4over.com > > wrote: > >> Looks like I'm running 3.1 >> >> [image: Inline image 1] >> >> >> >> On Tue, Apr 17, 2012 at 1:27 PM, Dominic Kaiser < >> dominic(a)bostonvineyard.org> wrote: >> >>> What version of ovirt engine are you running? I do not have the Guide >>> Me Section. >>> >>> Here is mine: >>> >>> >>> >>> On Tue, Apr 17, 2012 at 3:22 PM, Christian Hernandez < >>> christianh(a)4over.com> wrote: >>> >>>> I am talking about when you click "New Domain" in the storage tab. >>>> >>>> I cannot add an ISO domain (it's greyed out); I assume because I >>>> haven't added storage yet. >>>> >>>> I am talking about using NFS storage to store the VM images. I cannot >>>> add ANY storage domains... >>>> >>>> Just to summarize. >>>> >>>> I want to use my NetApp for BOTH ISO domain and Storage domain. And I >>>> keep getting the attached error >>>> >>>> [image: Inline image 1] >>>> >>>> >>>> Now on BOTH oVirt Engine AND Host I can manually mount the share with >>>> NO PROBLEMS using "mount.nfs" command. >>>> >>>> I have supplied logs before but here it is again (in brief) >>>> >>>> On the Host under: /var/log/vdsm/vdsm.log >>>> >>>> >>>> Thread-34801::DEBUG::2012-04-14 09:42:06,896::BindingXMLRPC::167::vds::(wrapper) [192.168.11.236] >>>> Thread-34801::ERROR::2012-04-14 09:42:06,896::BindingXMLRPC::171::vds::(wrapper) Unexpected exception >>>> Traceback (most recent call last): >>>> File "/usr/share/vdsm/BindingXMLRPC.py", line 169, in wrapper >>>> return f(*args, **kwargs) >>>> File "/usr/share/vdsm/BindingXMLRPC.py", line 571, in poolValidateStorageServerConnection >>>> return pool.validateStorageServerConnection(domType, conList) >>>> File "/usr/share/vdsm/API.py", line 897, in validateStorageServerConnection >>>> return self._irs.validateStorageServerConnection(domainType, >>>> AttributeError: 'NoneType' object has no attribute 'validateStorageServerConnection' >>>> Thread-34802::DEBUG::2012-04-14 09:42:07,072::BindingXMLRPC::167::vds::(wrapper) [192.168.11.236] >>>> Thread-34802::ERROR::2012-04-14 09:42:07,073::BindingXMLRPC::171::vds::(wrapper) Unexpected exception >>>> Traceback (most recent call last): >>>> File "/usr/share/vdsm/BindingXMLRPC.py", line 169, in wrapper >>>> return f(*args, **kwargs) >>>> File "/usr/share/vdsm/BindingXMLRPC.py", line 491, in poolDisconnectStorageServer >>>> return pool.disconnectStorageServer(domType, conList) >>>> File "/usr/share/vdsm/API.py", line 823, in disconnectStorageServer >>>> return self._irs.disconnectStorageServer(domainType, self._UUID, >>>> AttributeError: 'NoneType' object has no attribute 'disconnectStorageServer' >>>> >>>> >>>> Under the oVirt Engine server: /var/log/ovirt/engine.log >>>> >>>> >>>> 2012-04-14 09:37:24,730 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.ValidateStorageServerConnectionVDSCommand] (http--0.0.0.0-8443-4) [2473641b] START, ValidateStorageServerConnectionVDSCommand(vdsId = 14a2f814-85bf-11e1-822d-0016367ecdf0, storagePoolId = 00000000-0000-0000-0000-000000000000, storageType = NFS, connectionList = [{ id: null, connection: nfs.ovirt.4over.com:/vol/webresources/ovirt };]), log id: 41df1751 >>>> 2012-04-14 09:37:24,745 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase] (http--0.0.0.0-8443-4) [2473641b] Failed in ValidateStorageServerConnectionVDS method >>>> 2012-04-14 09:37:24,745 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase] (http--0.0.0.0-8443-4) [2473641b] Error code unexpected and error message VDSGenericException: VDSErrorException: Failed to ValidateStorageServerConnectionVDS, error = Unexpected exception >>>> 2012-04-14 09:37:24,746 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase] (http--0.0.0.0-8443-4) [2473641b] Command org.ovirt.engine.core.vdsbroker.vdsbroker.ValidateStorageServerConnectionVDSCommand return value >>>> >>>> Class Name: org.ovirt.engine.core.vdsbroker.vdsbroker.ServerConnectionStatusReturnForXmlRpc >>>> mStatusList Null >>>> mStatus Class Name: org.ovirt.engine.core.vdsbroker.vdsbroker.StatusForXmlRpc >>>> mCode 16 >>>> mMessage Unexpected exception >>>> >>>> >>>> >>>> 2012-04-14 09:37:24,747 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase] (http--0.0.0.0-8443-4) [2473641b] Vds: bluejay >>>> 2012-04-14 09:37:24,747 ERROR [org.ovirt.engine.core.vdsbroker.VDSCommandBase] (http--0.0.0.0-8443-4) [2473641b] Command ValidateStorageServerConnectionVDS execution failed. Exception: VDSErrorException: VDSGenericException: VDSErrorException: Failed to ValidateStorageServerConnectionVDS, error = Unexpected exception >>>> 2012-04-14 09:37:24,747 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.ValidateStorageServerConnectionVDSCommand] (http--0.0.0.0-8443-4) [2473641b] FINISH, ValidateStorageServerConnectionVDSCommand, log id: 41df1751 >>>> 2012-04-14 09:37:24,748 ERROR [org.ovirt.engine.core.bll.storage.AddStorageServerConnectionCommand] (http--0.0.0.0-8443-4) [2473641b] Error during CanDoActionFailure.: org.ovirt.engine.core.common.errors.VdcBLLException: VdcBLLException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to ValidateStorageServerConnectionVDS, error = Unexpected exception >>>> at org.ovirt.engine.core.bll.VDSBrokerFrontendImpl.handleVdsResult(VDSBrokerFrontendImpl.java:53) [engine-bll.jar:] >>>> at org.ovirt.engine.core.bll.VDSBrokerFrontendImpl.RunVdsCommand(VDSBrokerFrontendImpl.java:38) [engine-bll.jar:] >>>> at org.ovirt.engine.core.bll.storage.BaseFsStorageHelper.ValidateStoragePoolConnectionsInHost(BaseFsStorageHelper.java:44) [engine-bll.jar:] >>>> at org.ovirt.engine.core.bll.storage.AddStorageServerConnectionCommand.canDoAction(AddStorageServerConnectionCommand.java:85) [engine-bll.jar:] >>>> at org.ovirt.engine.core.bll.CommandBase.InternalCanDoAction(CommandBase.java:478) [engine-bll.jar:] >>>> at org.ovirt.engine.core.bll.CommandBase.ExecuteAction(CommandBase.java:253) [engine-bll.jar:] >>>> at org.ovirt.engine.core.bll.Backend.runActionImpl(Backend.java:327) [engine-bll.jar:] >>>> at org.ovirt.engine.core.bll.Backend.RunAction(Backend.java:287) [engine-bll.jar:] >>>> at sun.reflect.GeneratedMethodAccessor125.invoke(Unknown Source) [:1.6.0_22] >>>> at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [:1.6.0_22] >>>> at java.lang.reflect.Method.invoke(Method.java:616) [:1.6.0_22] >>>> at org.jboss.as.ee.component.ManagedReferenceMethodInterceptorFactory$ManagedReferenceMethodInterceptor.processInvocation(ManagedReferenceMethodInterceptorFactory.java:72) [jboss-as-ee-7.1.0.Beta1b.jar:] >>>> at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:288) [jboss-invocation-1.1.1.Final.jar:] >>>> at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:374) [jboss-invocation-1.1.1.Final.jar:] >>>> at org.ovirt.engine.core.utils.ThreadLocalSessionCleanerInterceptor.injectWebContextToThreadLocal(ThreadLocalSessionCleanerInterceptor.java:11) [engine-utils.jar:] >>>> at sun.reflect.GeneratedMethodAccessor12.invoke(Unknown Source) [:1.6.0_22] >>>> at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [:1.6.0_22] >>>> at java.lang.reflect.Method.invoke(Method.java:616) [:1.6.0_22] >>>> at org.jboss.as.ee.component.ManagedReferenceLifecycleMethodInterceptorFactory$ManagedReferenceLifecycleMethodInterceptor.processInvocation(ManagedReferenceLifecycleMethodInterceptorFactory.java:123) [jboss-as-ee-7.1.0.Beta1b.jar:] >>>> at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:288) [jboss-invocation-1.1.1.Final.jar:] >>>> at org.jboss.invocation.WeavedInterceptor.processInvocation(WeavedInterceptor.java:53) [jboss-invocation-1.1.1.Final.jar:] >>>> at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:288) [jboss-invocation-1.1.1.Final.jar:] >>>> at org.jboss.as.ee.component.TCCLInterceptor.processInvocation(TCCLInterceptor.java:45) [jboss-as-ee-7.1.0.Beta1b.jar:] >>>> at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:288) [jboss-invocation-1.1.1.Final.jar:] >>>> at org.jboss.invocation.InitialInterceptor.processInvocation(InitialInterceptor.java:21) [jboss-invocation-1.1.1.Final.jar:] >>>> at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:288) [jboss-invocation-1.1.1.Final.jar:] >>>> at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) [jboss-invocation-1.1.1.Final.jar:] >>>> at org.jboss.as.ee.component.interceptors.ComponentDispatcherInterceptor.processInvocation(ComponentDispatcherInterceptor.java:53) [jboss-as-ee-7.1.0.Beta1b.jar:] >>>> at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:288) [jboss-invocation-1.1.1.Final.jar:] >>>> at org.jboss.as.ejb3.component.singleton.SingletonComponentInstanceAssociationInterceptor.processInvocation(SingletonComponentInstanceAssociationInterceptor.java:53) [jboss-as-ejb3-7.1.0.Beta1b.jar:] >>>> at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:288) [jboss-invocation-1.1.1.Final.jar:] >>>> at org.jboss.as.ejb3.tx.CMTTxInterceptor.invokeInNoTx(CMTTxInterceptor.java:221) [jboss-as-ejb3-7.1.0.Beta1b.jar:] >>>> at org.jboss.as.ejb3.tx.CMTTxInterceptor.supports(CMTTxInterceptor.java:367) [jboss-as-ejb3-7.1.0.Beta1b.jar:] >>>> at org.jboss.as.ejb3.tx.CMTTxInterceptor.processInvocation(CMTTxInterceptor.java:205) [jboss-as-ejb3-7.1.0.Beta1b.jar:] >>>> at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:288) [jboss-invocation-1.1.1.Final.jar:] >>>> at org.jboss.as.ejb3.component.interceptors.CurrentInvocationContextInterceptor.processInvocation(CurrentInvocationContextInterceptor.java:41) [jboss-as-ejb3-7.1.0.Beta1b.jar:] >>>> at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:288) [jboss-invocation-1.1.1.Final.jar:] >>>> at org.jboss.as.ee.component.NamespaceContextInterceptor.processInvocation(NamespaceContextInterceptor.java:44) [jboss-as-ee-7.1.0.Beta1b.jar:] >>>> at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:288) [jboss-invocation-1.1.1.Final.jar:] >>>> at org.jboss.as.ejb3.component.interceptors.LoggingInterceptor.processInvocation(LoggingInterceptor.java:55) [jboss-as-ejb3-7.1.0.Beta1b.jar:] >>>> at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:288) [jboss-invocation-1.1.1.Final.jar:] >>>> at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) [jboss-invocation-1.1.1.Final.jar:] >>>> at org.jboss.as.ee.component.ViewService$View.invoke(ViewService.java:165) [jboss-as-ee-7.1.0.Beta1b.jar:] >>>> at org.jboss.as.ee.component.ViewDescription$1.processInvocation(ViewDescription.java:173) [jboss-as-ee-7.1.0.Beta1b.jar:] >>>> at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:288) [jboss-invocation-1.1.1.Final.jar:] >>>> at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) [jboss-invocation-1.1.1.Final.jar:] >>>> at org.jboss.as.ee.component.ProxyInvocationHandler.invoke(ProxyInvocationHandler.java:72) [jboss-as-ee-7.1.0.Beta1b.jar:] >>>> at org.ovirt.engine.core.common.interfaces.BackendLocal$$$view9.RunAction(Unknown Source) [engine-common.jar:] >>>> at org.ovirt.engine.ui.frontend.server.gwt.GenericApiGWTServiceImpl.RunAction(GenericApiGWTServiceImpl.java:120) >>>> at sun.reflect.GeneratedMethodAccessor124.invoke(Unknown Source) [:1.6.0_22] >>>> at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [:1.6.0_22] >>>> at java.lang.reflect.Method.invoke(Method.java:616) [:1.6.0_22] >>>> at com.google.gwt.rpc.server.RPC.invokeAndStreamResponse(RPC.java:196) >>>> at com.google.gwt.rpc.server.RpcServlet.processCall(RpcServlet.java:161) >>>> at com.google.gwt.rpc.server.RpcServlet.processPost(RpcServlet.java:222) >>>> at com.google.gwt.user.server.rpc.AbstractRemoteServiceServlet.doPost(AbstractRemoteServiceServlet.java:62) >>>> at javax.servlet.http.HttpServlet.service(HttpServlet.java:754) [jboss-servlet-api_3.0_spec-1.0.0.Final.jar:] >>>> at javax.servlet.http.HttpServlet.service(HttpServlet.java:847) [jboss-servlet-api_3.0_spec-1.0.0.Final.jar:] >>>> at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:329) >>>> at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:248) >>>> at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:275) >>>> at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:161) >>>> at org.jboss.as.web.security.SecurityContextAssociationValve.invoke(SecurityContextAssociationValve.java:151) >>>> at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:155) >>>> at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) >>>> at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109) >>>> at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:362) >>>> at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:877) >>>> at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:671) >>>> at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:930) >>>> at java.lang.Thread.run(Thread.java:679) [:1.6.0_22] >>>> >>>> 2012-04-14 09:37:24,901 INFO [org.ovirt.engine.core.bll.storage.RemoveStorageServerConnectionCommand] (http--0.0.0.0-8443-4) [59f5ac21] Running command: RemoveStorageServerConnectionCommand internal: false. Entities affected : ID: aaa00000-0000-0000-0000-123456789aaa Type: System >>>> 2012-04-14 09:37:24,907 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.DisconnectStorageServerVDSCommand] (http--0.0.0.0-8443-4) [59f5ac21] START, DisconnectStorageServerVDSCommand(vdsId = 14a2f814-85bf-11e1-822d-0016367ecdf0, storagePoolId = 00000000-0000-0000-0000-000000000000, storageType = NFS, connectionList = [{ id: null, connection: nfs.ovirt.4over.com:/vol/webresources/ovirt };]), log id: 4dad8f68 >>>> 2012-04-14 09:37:24,922 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase] (http--0.0.0.0-8443-4) [59f5ac21] Failed in DisconnectStorageServerVDS method >>>> 2012-04-14 09:37:24,922 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase] (http--0.0.0.0-8443-4) [59f5ac21] Error code unexpected and error message VDSGenericException: VDSErrorException: Failed to DisconnectStorageServerVDS, error = Unexpected exception >>>> 2012-04-14 09:37:24,923 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase] (http--0.0.0.0-8443-4) [59f5ac21] Command org.ovirt.engine.core.vdsbroker.vdsbroker.DisconnectStorageServerVDSCommand return value >>>> >>>> Class Name: org.ovirt.engine.core.vdsbroker.vdsbroker.ServerConnectionStatusReturnForXmlRpc >>>> mStatusList Null >>>> mStatus Class Name: org.ovirt.engine.core.vdsbroker.vdsbroker.StatusForXmlRpc >>>> mCode 16 >>>> mMessage Unexpected exception >>>> >>>> >>>> >>>> 2012-04-14 09:37:24,924 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase] (http--0.0.0.0-8443-4) [59f5ac21] Vds: bluejay >>>> 2012-04-14 09:37:24,924 ERROR [org.ovirt.engine.core.vdsbroker.VDSCommandBase] (http--0.0.0.0-8443-4) [59f5ac21] Command DisconnectStorageServerVDS execution failed. Exception: VDSErrorException: VDSGenericException: VDSErrorException: Failed to DisconnectStorageServerVDS, error = Unexpected exception >>>> 2012-04-14 09:37:24,924 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.DisconnectStorageServerVDSCommand] (http--0.0.0.0-8443-4) [59f5ac21] FINISH, DisconnectStorageServerVDSCommand, log id: 4dad8f68 >>>> 2012-04-14 09:37:24,925 ERROR [org.ovirt.engine.core.bll.storage.RemoveStorageServerConnectionCommand] (http--0.0.0.0-8443-4) [59f5ac21] Command org.ovirt.engine.core.bll.storage.RemoveStorageServerConnectionCommand throw Vdc Bll exception. With error message VdcBLLException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to DisconnectStorageServerVDS, error = Unexpected exception >>>> 2012-04-14 09:37:24,929 ERROR [org.ovirt.engine.core.bll.storage.RemoveStorageServerConnectionCommand] (http--0.0.0.0-8443-4) [59f5ac21] Transaction rolled-back for command: org.ovirt.engine.core.bll.storage.RemoveStorageServerConnectionCommand. >>>> >>>> >>>> >>>> Not sure what I am missing... >>>> >>>> _______________________________________________ >>>> Users mailing list >>>> Users(a)ovirt.org >>>> http://lists.ovirt.org/mailman/listinfo/users >>>> >>>> >>> >>> >>> -- >>> Dominic Kaiser >>> Greater Boston Vineyard >>> Director of Operations >>> >>> cell: 617-230-1412 >>> fax: 617-252-0238 >>> email: dominic(a)bostonvineyard.org >>> >>> >>> >> >> _______________________________________________ >> Users mailing list >> Users(a)ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> > > > -- > Dominic Kaiser > Greater Boston Vineyard > Director of Operations > > cell: 617-230-1412 > fax: 617-252-0238 > email: dominic(a)bostonvineyard.org > > >

1 0