June 2013 - Users - Ovirt List Archives

[Users] oVirt 3.3 does not start HTML5/noVNC viewer

by Matt .

HI All, I upgraded to 3.3 and tried to start a console. Whatever version of console I set, VNC or Spice, the browser downloads a console.vv file now. Am I doing something wrong or is this just the unreleased version ? Thanks for the help! Cheers, Matt

11 years, 5 months

4
25
0 / 0

[Users] oVirt and iSCSI initiator

by James James

Hi guys, I've got some problems with my ovirt-engine. Currently I have one iscsi storage volume and I want add a second one. The second has the same configuration as the first. In my engine I can log into the iSCSI but I cannot see the LUN. Ovirt gives me this message : 2013-06-17 15:50:04,013 ERROR [org.ovirt.engine.core.bll.storage.DiscoverSendTargetsQuery] (ajp--127.0.0.1-8702-9) Query DiscoverSendTargetsQuery failed. Exception message is VdcBLLException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed in vdscommand to DiscoverSendTargetsVDS, error = Failed discovery of iSCSI targets: "portal=IscsiPortal(hostname='iscsi-1.example.com', port=3260), err=(5, [], ['iscsiadm: Connection to Discovery Address 192.168.0.98 closed', 'iscsiadm: Login I/O error, failed to receive a PDU', 'iscsiadm: retrying discovery login to 192.168.0.98', 'iscsiadm: Connection to Discovery Address 192.168.0.98 closed', 'iscsiadm: Login I/O error, failed to receive a PDU', 'iscsiadm: retrying discovery login to 192.168.0.98', 'iscsiadm: Connection to Discovery Address 192.168.0.98 closed', 'iscsiadm: Login I/O error, failed to receive a PDU', 'iscsiadm: retrying discovery login to 192.168.0.98', 'iscsiadm: Connection to Discovery Address 192.168.0.98 failed', 'iscsiadm: Login I/O error, failed to receive a PDU', 'iscsiadm: retrying discovery login to 192.168.0.98', 'iscsiadm: Connection to Discovery Address 192.168.0.98 failed', 'iscsiadm: Login I/O error, failed to receive a PDU', 'iscsiadm: retrying discovery login to 192.168.0.98', 'iscsiadm: Connection to Discovery Address 192.168.0.98 closed', 'iscsiadm: Login I/O error, failed to receive a PDU', 'iscsiadm: retrying discovery login to 192.168.0.98', 'iscsiadm: connection login retries (reopen_max) 5 exceeded', 'iscsiadm: Could not perform SendTargets discovery: encountered iSCSI login failure'])" 2013-06-17 15:54:03,649 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.DiscoverSendTargetsVDSCommand] (ajp--127.0.0.1-8702-3) START, DiscoverSendTargetsVDSCommand(HostName = hosts-1.example.com, HostId = 1c8e67de-c355-4b07-a09f-c58d08115e1e, connection={ id: null, connection: iscsi-1.example.com, iqn: null, vfsType: null, mountOptions: null, nfsVersion: null, nfsRetrans: null, nfsTimeo: null };), log id: 3dca76fc Can somebody help me ?

11 years, 5 months

2
6
0 / 0

[Users] Ovirt VM CD/DVD not booting

by Rick Ingersoll

--_004_0a7a11d196264a82b6cca41ded622f67BL2PR08MB196namprd08pro_ Content-Type: multipart/alternative; boundary="_000_0a7a11d196264a82b6cca41ded622f67BL2PR08MB196namprd08pro_" --_000_0a7a11d196264a82b6cca41ded622f67BL2PR08MB196namprd08pro_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hi guys, I have an issue where I have an allinone setup. I was succ= essful in building one VM, but now when I try to add additional vms and boo= t them, the ISO image I attach in run once isn't booting. The VM is coming= up saying could not read from CDROM. Any ideas what I'm missing? Thanks, Rick Ingersoll IT Consultant (919) 234-5100 main (919) 234-5101 direct (919) 757-5605 mobile (919) 747-7409 fax rick.ingersoll(a)mjritsolutions.com<mailto:rick.ingersoll@mjritsolutions.com> http://www.mjritsolutions.com<http://www.mjritsolutions.com/> [mjritsolutions_logo_signature] --_000_0a7a11d196264a82b6cca41ded622f67BL2PR08MB196namprd08pro_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <meta name=3D"Generator" content=3D"Microsoft Word 15 (filtered medium)"> <style></style> </head> <body lang=3D"EN-US" link=3D"#0563C1" vlink=3D"#954F72"> <div class=3D"WordSection1"> Hi guys,<o:p></o:p>         &nbs= p;       I have an issue where I have an alli= none setup.  I was successful in building one VM, but now when I try t= o add additional vms and boot them, the ISO image I attach in run once isn&= #8217;t booting.  The VM is coming up saying could not read from CDROM.  Any ideas what I’m missing?<o:p></o= :p> <o:p> </o:p> Thanks,<o:p></o:p> <o:p> </o:p> Rick Ingersoll<o:p></o:p></p= > IT Consultant<o:p></o:p><= /span> (919) 234-5100 main<o:p></o:= p> (919) 234-5101 direct<o:p></= o:p> (919) 757-5605 mobile<o:p></= o:p> (919) 747-7409 fax<o:p></o:p= > <a href=3D"mailto:rick.ingersoll@mjritsolu= tions.com">rick.ingersoll(a)mjritsolutions.com<= /span></a><o:p></o:p> <a href=3D"http://www.mjritsolutions.com/"= >http://www.mjritsolutions.com</a><o:p= ></o:p> <img border=3D"0" w= idth=3D"200" height=3D"42" id=3D"Picture_x0020_1" src=3D"cid:image001.jpg@0= 1CE6B60.08F80EF0" alt=3D"mjritsolutions_logo_signature"><o:p></o:p><= /p> <o:p> </o:p> </div> </body> </html> --_000_0a7a11d196264a82b6cca41ded622f67BL2PR08MB196namprd08pro_-- --_004_0a7a11d196264a82b6cca41ded622f67BL2PR08MB196namprd08pro_ Content-Type: image/jpeg; name="image001.jpg" Content-Description: image001.jpg Content-Disposition: inline; filename="image001.jpg"; size=2147; creation-date="Mon, 17 Jun 2013 17:39:08 GMT"; modification-date="Mon, 17 Jun 2013 17:39:08 GMT" Content-ID: <image001.jpg(a)01CE6B60.08F80EF0> Content-Transfer-Encoding: base64 /9j/4AAQSkZJRgABAQEAYABgAAD/2wBDAAoHBwkHBgoJCAkLCwoMDxkQDw4ODx4WFxIZJCAmJSMg IyIoLTkwKCo2KyIjMkQyNjs9QEBAJjBGS0U+Sjk/QD3/2wBDAQsLCw8NDx0QEB09KSMpPT09PT09 PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT3/wAARCAAqAMgDASIA AhEBAxEB/8QAHwAAAQUBAQEBAQEAAAAAAAAAAAECAwQFBgcICQoL/8QAtRAAAgEDAwIEAwUFBAQA AAF9AQIDAAQRBRIhMUEGE1FhByJxFDKBkaEII0KxwRVS0fAkM2JyggkKFhcYGRolJicoKSo0NTY3 ODk6Q0RFRkdISUpTVFVWV1hZWmNkZWZnaGlqc3R1dnd4eXqDhIWGh4iJipKTlJWWl5iZmqKjpKWm p6ipqrKztLW2t7i5usLDxMXGx8jJytLT1NXW19jZ2uHi4+Tl5ufo6erx8vP09fb3+Pn6/8QAHwEA AwEBAQEBAQEBAQAAAAAAAAECAwQFBgcICQoL/8QAtREAAgECBAQDBAcFBAQAAQJ3AAECAxEEBSEx BhJBUQdhcRMiMoEIFEKRobHBCSMzUvAVYnLRChYkNOEl8RcYGRomJygpKjU2Nzg5OkNERUZHSElK U1RVVldYWVpjZGVmZ2hpanN0dXZ3eHl6goOEhYaHiImKkpOUlZaXmJmaoqOkpaanqKmqsrO0tba3 uLm6wsPExcbHyMnK0tPU1dbX2Nna4uPk5ebn6Onq8vP09fb3+Pn6/9oADAMBAAIRAxEAPwD2aiii gAooooAKKKSgBaSisTxpLJD4N1aSGR45FtmKujYIOOoIoYm7K5t155p+t+KNS8VX8QuooNJtLp4t xgXc+D91T/M9q4Pw5DrWszebLqmoR2aH5n+0Plz/AHRz+te3aNbQjSLXESf6sckZJ989z71CfNqZ xk6muxo0tFFWahRRRQAUUUUAFFFFABRRRQAUUUUAFFFFABRRRQAlFcPr13qdp41ludOZ5FtLNJZb XccSx7iGAHTPf8KpeK/Ec+uaTLNo8skWm23lmWYZVpZGIwg/3c5PvQB6LRVOy1S1vrq6treXfNaF UmG0jaSOme/SvM0u5n0LTfOmvJEfVpUkWGRvMdcD5Rzn6CgD1ivOfHHxF1Hwv4iNhaW1pJF5KSbp Q27Jz6EelV3khudStrfw/FriX8NyhmW4lbCR553AsfarN/BFc/GcRzxRyp/ZhO11DDPPY1M720M6 l7aHO/8AC6NZ/wCfHTvyf/4qrun+ONU8aE6Te21lDY3ZEErxbt+D125PX3qn8PdVu7/V7DT7qysH 08BotzWqb2KoSPm6k8cmrulXU2oavpkk62qBLkMBDapGepGMjnFRG76mUOaWrZ3EPg60t4UhhmkS NBtVVUYArctbcWtrHArFhGu0E9TXFa/Z30nie6klstUvbUxxiEWV15YQ4+bIz61Sh1R9CTVXgh1S 0vEsxIlvfyiVMbwN45znmtTpPSKK5W9XxBZ6JNqH9twv5UBm2fYlGcDOM5qTQNcvNS1ySCdk8n7B BcBVXGHcZPPpQB01FYeo6nc23ivSLGJlFvcpKZQVySVGRz2pmqajfJ4osdNtZ0ijubaVixjDYYDg /wD1qAN+iuPSXxA/iSTSf7ZhGy1Fx5v2NectjGM1Dq3iPVdOm1aBJ4na1W1SNzEPvOQGbH9KAO2o rk9cPiDRdGudQ/tmGbyF3eWbNV3cgYzuquvi3ULTVb6S6tvP0qBo1d4l+e33IGyR/EvP4UAdpRXF XnibUJn1ZtJlW4hhNsYGii8zaj/fbA5bHpRZa/e/2pZxzapK0c0wjK3GltCHz2DZ4NAHaUVBfEiw uCCQRE2CPoa4PSNd1ez0Pw6lggvHuEuHlikbLShG7MehxnFAHolFcm/jBb260z+zpAFlaZbmCRcO hWMsFI6jkVHps3iLVPDkeqprFtE0kTSCJrVQoIzwWzwOOtAHYUVXsGmewt2ujGZzGpkMZypbHOPa igCJdKt11l9TG/7Q8IgPPy7Qc9PWoL3w7p99pDaaYvJtWfeVh+XnO7+dalFAHP3fgzT7q/nvFnvr eWdg0gguCgY+uKfB4P0y2gsoovPAs7g3MZMmSznu3rW7RQBlaj4es9RvoL5jLBeQfdngfYxHofUe xrhvE8eqWvxIbUdPjYKlksRkaEuDnOQAO9enUUmrkyjc8fsLe90uW1lsopUltfuFrcsDlSDkfjVn Q7KeDU7BWhmIWZcsYyO/WvV6KY0kjAvvB9hfahNe+fewSz4MnkTlAxAwDj6UyLwRpaJdLI93ObmL yXeacswXOcA9uRXRUUDOefwbbywNDJqervEy7ShvGKkemPSnyeELI3QuILm/tXEKQ/6POUyijAFb 1FAGDJ4StZhA0l7qTTQMzRzm5PmKGABG704qWy8M21nqUd+1ze3NxGhRGuZy+0HritmigCkulW66 y+qAv9oaEQH5vl2g56euap33hbT9QlvpJ/O3XojEm18Y2fdK+hrZooA52fwbbXULQ3OpavNE/DRy XjFWHoRWpZaTbWE91LCGzdFTIGOR8q7RgfQVeooAwP8AhDNKT7R9nWe18+RJT5EpTYy5wVx06nin DwpbGeGW4vdSuvIfzESe5LKGHQ4/Gt2igDH0HRW03RGsriR3MjOzZcsVDH7oY9cDvRY+GLHTzpxg M3/EvWRYdz54f72fWtiigDKuPDenXOsRam8O26jDKWQ43ggj5h34JqgvgiyS0Nql/qqWxUr5K3Z2 bT1GPSukooAy7Tw9Z2N/DdwGZXhtltUQyEoEHTj196K1KKAP/9k= --_004_0a7a11d196264a82b6cca41ded622f67BL2PR08MB196namprd08pro_--

11 years, 5 months

2
2
0 / 0

[Users] Small howto to install ovirt dreyou on Centos 6.4

by Kevin Maziere Aubry

Hi For manager, - yum install wget - wget http://www.dreyou.org/ovirt/ovirt-dre.repo -P /etc/yum.repos.d/ - yum install ovirt-engine For hypervisor: selinux and firewall are activated, DO NOT remove them You must have a working dns between you nodes (if all-in-one it's ok), at least put nameservers into /etc/hosts (hyp and manger) - su -c 'rpm -Uvh http://download.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noar... ' - yum install wget - wget http://www.dreyou.org/ovirt/ovirt-dre.repo -P /etc/yum.repos.d/ - yum clean all - yum makecache - check that ifcfg-eth0 does not contain NETMASK and PREFIX, remove PREFIX if needed - yum install vdsm - Ovirt node can now be added into the manager - setsebool -P virt_use_sanlock=on - setsebool -P virt_use_nfs=on - yum install vdsm-hook-qemucmdline vdsm-hook-fileinject vdsm-hook-floppy - service vdsmd restart Hope it can help. Kevin

11 years, 5 months

2
1
0 / 0

[Users] cpu stuck after joining fedora 18 node to ovirt

by Daniele Pavia

Dear all, we're facing this issue while trying to join a Fedora 18 server with the latest stable vdsm to an instance of ovirt-engine 3.2.2. Let's put things in context: we have this fujitsu rx200 server with a dual emulex fc nic connected with two fibres that go through two brocade switches, which in turn have four paths each to a vnx 5300 storage - that's a grand total of eight paths. Now. This server was previously employed as an ovirt node and was working correctly with the very same configuration, we simply reinstalled the server with the latest Fedora 18 stable release. The server boots fine and multipathd is already up and running. All the paths are valid and block devices are seen. Please note that those block devices contain our ovirt 's d.c. storage domains. We set up and enable ovirt's stable repo and proceed to install vdsmd, then we add the node from the webadmin interface. Bear in mind that we face the same issue by letting the engine install the vdsm daemon on its own. The node gets installed successfully and reboots. When the OS tries to initialize the storage we get this funny message about a random core getting stuck for xx seconds. Then it fails to mount /home and finally drops to the emergency shell. (see attachment) If we remove the host from the storage group and reboot it, it doesn't hang. A few things we tried to fix this up: * restored multipath.conf from a working node * put each mountpoint's uuid inside fstab * installed vdsm from fedora updates instead of the official ovirt stable * swapped two different fujitsu models (we had the same issue with another server: we swapped them and had the first one join a rhev infrastructure running on the same network without shedding a single tear) We consciously avoided installing ovirt node since we require more control out of our servers than such a minimal distribution will ever let us have, however we're willing to deploy it for troubleshooting purposes. Any feedback will be more than welcome. Cheers, Daniele Pavia

11 years, 5 months

3
2
0 / 0

[Users] Starting VM gets paused

by Nicolas Ecarnot

Hi, After two months of stable usage of this 3.1 oVirt setup, here comes the first blocking issue for which I've no other mean to ask some hint. When I'm starting a VM, the start process is running fine. Being fast enough, we can ssh-connect to it, but 5 seconds later, the VM is paused. In the manager, I see that : 2013-03-22 09:42:57,435 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.VdsBrokerObjectsBuilder] (QuartzScheduler_Worker-40) Error in parsing vm pause status. Setting value to NONE 2013-03-22 09:42:57,436 INFO [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (QuartzScheduler_Worker-40) VM serv-chk-adm3 3e17586d-bf8f-465b-8075-defaac90bc95 moved from PoweringUp --> Paused And on the host, I see one warning message, no error msg, and many looping repeated messages : * Warning : Thread-1968::WARNING::2013-03-22 09:19:18,536::libvirtvm::1547::vm.Vm::(_readPauseCode) vmId=`3e17586d-bf8f-465b-8075-defaac90bc95`::_readPauseCode unsupported by libvirt vm * Repeated msgs, amongst other repeated ones : Thread-1973::DEBUG::2013-03-22 09:19:20,247::libvirtvm::220::vm.Vm::(_getNetworkStats) vmId=`3e17586d-bf8f-465b-8075-defaac90bc95`::Network stats not available Thread-1973::DEBUG::2013-03-22 09:19:20,247::libvirtvm::240::vm.Vm::(_getDiskStats) vmId=`3e17586d-bf8f-465b-8075-defaac90bc95`::Disk hdc stats not available I made my homework and found some bugs that could be similar : https://bugzilla.redhat.com/show_bug.cgi?id=660598 https://bugzilla.redhat.com/show_bug.cgi?id=672208 and moreover : https://bugzilla.redhat.com/show_bug.cgi?id=695393 - I tried to restart the node's vds daemon : same behavior - I tried to reboot the node : same behavior - I tried to to restart the manager's engine : same behavior - I tried to run this VM on another node : same behavior - I tried to run another VM on the node I saw the issue : the other VM is running fine. I don't know if I have to conclude that this issue is specific to this VM, but I sounds like yes. Things to say about this VM : - it it a RH6 IIRC. It has already been successfully started, migrated, stopped and rebooted many times in the past. - it has 3 disks : one for the system and two for datas. - it has no snapshots - it has no different or complicated network setup My storage domain is a SAN, iSCSI linked, and doing good job since months. I must admit I'm a bit stuck. Last thing I haven't tried is to reboot the manager, though I'm not sure that would help. -- Nicolas Ecarnot

11 years, 5 months

6
11
0 / 0

[Users] Python-sdk for oVirt 3.3

by Romil Gupta

Hi All, Which *ovirt**-engine-sdk* version is recommended for *oVirt 3.3* ? -- *Thanks,* *Romil *

11 years, 5 months

2
1
0 / 0

Re: [Users] oVirt and IPA (LDAP/KERBEROS)

by James James

ok Thanks for your answer. I don't have a SRV record in my DNS so I have just installed dnsmasq on my ovirt-engine server and add : in /etc/dnsmasq.conf svr-host = _ldap._tcp.example.com,ldapserver.example.com,389 srv-host=_kerberos._tcp.example.com,krb5.example.com,88 in /etc/resolv.conf nameserver MY_OVIRT-ENGINE_IP_ADDRESS on the top of namserver and everything works. Thanks again. 2013/6/14 Ian Forde <ianforde(a)gmail.com> > Since you've got IPA server setup, I assume that you've already got your > SRV records setup in DNS. So, according to 'engine-manage-domains -h', you > don't have to specify the "ldapServers" argument. Instead, do: > > engine-manage-domains -action=add -domain=example.com -user=admin > -provider=IPA -passwordFile=/tmp/.pwd > > where /tmp/.pwd holds the password for the duration of this operation. > (In other words, put the password in there first, then delete the file > when you're done.) > > That's what worked for me, anyway... > > -I > > > On Thu, Jun 13, 2013 at 1:42 PM, James James <jreg2k(a)gmail.com> wrote: > >> Hello, >> >> I want to connect my oVirt server on my IPA server. After executing : >> engine-manage-domains -action=add -domain=example.com -user=admin >> -provider=IPA -ldapServers=ldap.example.com -interactive -report >> >> I've got this answer : >> >> Invalid argument ldapservers >> >> >> Can somebody help me ? >> >> Regards >> >> _______________________________________________ >> Users mailing list >> Users(a)ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> >

11 years, 5 months

2
1
0 / 0

[Users] install ovirt-guest-agent for windows error

by Joy

This is a multi-part message in MIME format. ------=_NextPart_51BA8665_084FC898_2B95900A Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: base64 SSBmb2xsb3cgdGhlIHN0ZXBzIHRvIGluc3RhbGwgaHR0cHM6Ly9naXRodWIuY29tL29WaXJ0 L292aXJ0LWd1ZXN0LWFnZW50L2Jsb2IvbWFzdGVyL292aXJ0LWd1ZXN0LWFnZW50L1JFQURN RS13aW5kb3dzLnR4dCBvdmlydC1ndWVzdC1hZ2VudCwgYnV0IHRoZSBmb2xsb3dpbmcgZXJy b3I6DQp0cmFjZWJhY2sgKG1vcmUgcmVjZW50IGNhbGwgbGFzdCk6DQpmaWxlICJib290X3Nl cnZpY2UucHkiLCBsaW5lIDE1OCAsIGluIDxtb2R1bGU+DQpmaWxlICJ3aW4zMnNlcnZpY2V1 dGlsLnB5YyIgLCBsaW5lIDE3MCAsIGluIEluc3RhbGxTZXJ2aWNlDQpweXdpbnR5cGVzLmVy cm9yOjwxMDcyLCdDcmVhdGVTZXJ2aWNlJywnPz8/Pz8/Pz8/Pz8nPg0KDQoNCldpbGwgbmVl ZCB0byBob3cgdG8gc29sdmUgLlRoYW5rcy4= ------=_NextPart_51BA8665_084FC898_2B95900A Content-Type: text/html; charset="ISO-8859-1" Content-Transfer-Encoding: base64 PGRpdj48ZGl2PkkgZm9sbG93IHRoZSBzdGVwcyB0byBpbnN0YWxsIGh0dHBzOi8vZ2l0aHVi LmNvbS9vVmlydC9vdmlydC1ndWVzdC1hZ2VudC9ibG9iL21hc3Rlci9vdmlydC1ndWVzdC1h Z2VudC9SRUFETUUtd2luZG93cy50eHQgb3ZpcnQtZ3Vlc3QtYWdlbnQsIGJ1dCB0aGUgZm9s bG93aW5nIGVycm9yOjwvZGl2PjxkaXY+dHJhY2ViYWNrIChtb3JlIHJlY2VudCBjYWxsIGxh c3QpOjwvZGl2PjxkaXY+ZmlsZSAiYm9vdF9zZXJ2aWNlLnB5IiwgbGluZSAxNTggLCBpbiAm bHQ7bW9kdWxlJmd0OzwvZGl2PjxkaXY+ZmlsZSAid2luMzJzZXJ2aWNldXRpbC5weWMiICwg bGluZSAxNzAgLCBpbiBJbnN0YWxsU2VydmljZTwvZGl2PjxkaXY+cHl3aW50eXBlcy5lcnJv cjombHQ7MTA3MiwnQ3JlYXRlU2VydmljZScsJz8/Pz8/Pz8/Pz8/JyZndDs8L2Rpdj48ZGl2 Pjxicj48L2Rpdj48ZGl2PldpbGwgbmVlZCB0byBob3cgdG8gc29sdmUgLlRoYW5rcy48L2Rp dj48L2Rpdj48ZGl2Pjxicj48L2Rpdj4= ------=_NextPart_51BA8665_084FC898_2B95900A--

11 years, 5 months

2
1
0 / 0

[Users] Disk migration

by suporte＠logicworks.pt

------=_Part_450_796715.1371206445254 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Hi, With version 3.2.1, when I move a disk from one storage domain to another allways get the message "User admin@internal have failed to move disk WEB1_Disk1 to domain NAS1", but on the Disks options, under Storage Domain(s) I have the information it as moved the disk to domain NAS1. Who is right? If I try to make a snapshot get an error saying that the image does not exist . The really bad thing is if I shutdown the VM, cannot start it again, the error message is "Failed to run VM teste (User: admin@internal)." Any idea what I can do? Regards Jose -- Jose Ferradeira http://www.logicworks.pt ------=_Part_450_796715.1371206445254 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: 7bit <html><head><style type='text/css'>p { margin: 0; }</style></head><body><div style='font-family: arial,helvetica,sans-serif; font-size: 10pt; color: #000000'>Hi, With version 3.2.1, when I move a disk from one storage domain to another allways get the message "User admin@internal have failed to move disk WEB1_Disk1 to domain NAS1", but on the Disks options, under Storage Domain(s) I have the information it as moved the disk to domain NAS1. Who is right? If I try to make a snapshot get an error saying that the image does not exist. The really bad thing is if I shutdown the VM, cannot start it again, the error message is  "Failed to run VM teste (User: admin@internal)." Any idea what I can do? Regards Jose -- <div><hr style="width: 100%; height: 2px;">Jose Ferradeira http://www.logicworks.pt </div></div></body></html> ------=_Part_450_796715.1371206445254--

11 years, 5 months

1
1
0 / 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

Users June 2013