August 2016 - Users - oVirt List Archives

Network Address Change
by Paul.LKW 28 Dec '22

28 Dec '22

Hi All: I just has a case, I need to change the oVirt host and engine IP address due to data center decommission I checked in the hosted-engine host there are some files I could change ; in ovirt-hosted-engine/hosted-engine.conf ca_subject="O=simple.com, CN=1.2.3.4" gateway=1.2.3.254 and of course I need to change the ovirtmgmt interface IP too, I think just change the above line could do the tick, but where could I change the other host IP in the cluster ? I think I have to be lost all the host as once changed the hosted-engine host IP as it is in diff. sub net. Does there any command line tools could do that or someone has such experience could share? Best Regards, Paul.LKW

4 6

looking for some ISV backup software which integrates the backup API
by Nathanaël Blanchet 08 Jun '22

08 Jun '22

Hello, We are about to change our backup provider, and I find it is a great chance to choose a full supported ovirt backup solution. I currently use this python script vm-backup-scheduler (https://github.com/wefixit-AT/oVirtBackup) but it is not the workflow officially suggested by the community (https://www.ovirt.org/develop/release-management/features/storage/backup-re…) I've been looking for a long time an ISV who supports such an API, but the only one I found is this one : Acronis Backup Advanced suggested here https://access.redhat.com/ecosystem/search/#/ecosystem/Red%20Hat%20Enterpri… I ran the trial version, but it doesn't seem to do better than the vm-backup-scheduler script, and it doesn't seem to use the backup API (attach a clone as a disk to an existing vm). Can you suggest me some other ISV solutions, if they ever exist... or share me your backup experience?

5 4

Vm suddenly paused with error "vm has paused due to unknown storage error"
by Jasper Siero 18 Feb '20

18 Feb '20

Hi all, Since we upgraded our Ovirt nodes to CentOS 7 a vm (not a specific one but never more then one) will sometimes pause suddenly with the error "VM ... has paused due to unknown storage error". It happens now two times in a month. The Ovirt node uses san storage for the vm's running on it. When a specific vm is pausing with an error the other vm's keeps running without problems. The vm runs without problems after unpausing it. Versions: CentOS Linux release 7.1.1503 vdsm-4.14.17-0 libvirt-daemon-1.2.8-16 vdsm.log: VM Channels Listener::DEBUG::2015-10-25 07:43:54,382::vmChannels::95::vds::(_handle_timeouts) Timeout on fileno 78. libvirtEventLoop::INFO::2015-10-25 07:43:56,177::vm::4602::vm.Vm::(_onIOError) vmId=`77f07ae0-cc3e-4ae2-90ec-7fba7b11deeb`::abnormal vm stop device virtio-disk0 error eother libvirtEventLoop::DEBUG::2015-10-25 07:43:56,178::vm::5204::vm.Vm::(_onLibvirtLifecycleEvent) vmId=`77f07ae0-cc3e-4ae2-90ec-7fba7b11deeb`::event Suspended detail 2 opaque None libvirtEventLoop::INFO::2015-10-25 07:43:56,178::vm::4602::vm.Vm::(_onIOError) vmId=`77f07ae0-cc3e-4ae2-90ec-7fba7b11deeb`::abnormal vm stop device virtio-disk0 error eother ........... libvirtEventLoop::INFO::2015-10-25 07:43:56,180::vm::4602::vm.Vm::(_onIOError) vmId=`77f07ae0-cc3e-4ae2-90ec-7fba7b11deeb`::abnormal vm stop device virtio-disk0 error eother specific error part in libvirt vm log: block I/O error in device 'drive-virtio-disk0': Unknown error 32758 (32758) ........... block I/O error in device 'drive-virtio-disk0': Unknown error 32758 (32758) engine.log: 2015-10-25 07:44:48,945 INFO [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (DefaultQuartzScheduler_Worker-40) [a43dcc8] VM diataal-prod-cas1 77f07ae0-cc3e-4ae2-90ec-7fba7b11deeb moved from Up --> Paused 2015-10-25 07:44:49,003 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler_Worker-40) [a43dcc8] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: VM diataal-prod-cas1 has paused due to unknown storage error. Has anyone experienced the same problem or knows a way to solve this? Kind regards, Jasper

3 3

[Users] Problem Creating "oVirtEngine" Machine
by Richie＠HIP 15 May '19

15 May '19

--Apple-Mail=_DF4BF6D1-1F87-4F60-9CF9-070D4D836241 Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset=windows-1252 I can't agree with you more. Modifying every box's or Virtual Machine's = HOSTS file with a FQDN and IP SHOULD work, but in my case it is not. = There are several reasons I've come to believe could be the problem = during my trial-and-errors testing and learning. FIRST - MACHINE IPs. THe machine's "Names" where not appearing in the Microsoft Active = Directory DHCP along with their assigned IPs; in other words, the DHCP = just showed an "Assigned IP", equal to the Linux Machine's IP, with a = <empty> ('i.e. blank, none, silch, plan old "no-letters-or-numbers") = "Name" in the "Name" (i.e. machines "network name", or FQDN-value used = by the Windows AD DNS-service) column. =20 if your IP is is appearing with an <empty> "name", there is no "host = name" to associate the IP, it makes it difficult to define a FQDN; which = isn't that useful if we're going to use the HOSTS files in all = participating machines in an oVirt Installation. I kept banging my head for three (3) long hours trying to find the = problem. In Fedora 18, I could't find where the "network name" of the machine = could be defined. =20 I tried putting the "Additional Search Domains" and/or "DHCP Client ID" = in Fedora's 18 Desktop - under "System Settings > Hardware > Network > = Options > IPv4 Setting" The DHCP went crazy; showing an "Aberrant-MAC-Address" (i.e. a really = long-sting value where the machine's MAC address should be), and we knew = the MAC address as we obtained using "ifconfig" on the machine getting = it's IP from the DHCP. So we reverted these entries from the = aforementioned, rebooted, and got an assigned IP, with proper MAC = address, but still no "Name" Kept wondering around the "Settings" and seeing which one made sense, = but what the heck, I went for it. =20 Under "System Settings > System > Details" I found the information about = GNOME and the machine's hardware. =20 There was a field for "Device Name" that originally had = "localhost.localdomain"; I changed the value to "ovirtmanager". and = under "Graphic" changed to "Forced Fallback Mode" to "ON". =20 I also installed all Kerberos libraries and client (i.e. authconfig-gtk, = authhub, authhub-client, krb5-apple-clents, krb5-auth-dialog, = krb5-workstation, pam-kcoda, pam-krb5, root-net.krb5) and rebooted VOILA=85!!! =20 I don;t know if it was the definition of "Device Name" from = "localhost.localdomain" to "ovirtengine", of the Kerberos libraries = install, or both. But finally the MS AD DHCP was showing the = Addigned-IP, the machine "Name" and the proper MAC-address. Regardless, = setting the machine's "Network Name" under "System Settings > System > = Details > Device Name", with no explanation of what "Device Name" meant = or was used for, was the last place I would have imagined this network = setting could be defined. NOTE - Somebody has to try the two steps I did together, separately. to = see which one is the real problem-solver; for me it is working, and "if = it ain't broke, don't fix it=85" Now that I have the DHCP / IP thing sorted, I have to do the DNS stuff. To this point, I've addressed the DHCP and "Network Name" of the = IP-Lease (required for the DNS to work). This still does't completely = explain why, by modifying the HOSTS file (allowing be to set and IP and = non-DNS FQDN). allows me to install the oVirtEngine "as long as I do not = use default HTTPd service parameters as suggested by the install". By = using the HOST file to "define" FQDNs, AND NOT using the default HTTPd = suggested changes, I'm able to install the oVirtEngine (given that I use = ports 8700 and 8701) to access the "oVirtEngine Welcome Screen", BUT = NONE of the "oVirt Portals" work=85 YET=85!!! More to come during the week Richie Jos=E9 E ("Richie") Piovanetti, MD, MS=20 M: 787-615-4884 | richiepiovanetti(a)healthcareinfopartners.com On Aug 2, 2013, at 3:10 AM, Joop <jvdwege(a)xs4all.nl> wrote: > Hello Ritchie, >=20 >> In a conversation via IRC, someone suggested that I activate = "dnsmask" to overcome what appears to be a DNS problem. I'll try that = other possibility once I get home later today. >>=20 >> In the mean time, what do you mean by "fixing the hostname"=85? I = opened and fixed the HOSTNAMES and changed it from = "localhost-localdomain" to "localhost.localdomain" and that made no = difference. Albeit, after changing I didm;t restart, remove ovirtEngine = ((using "engine-cleanup") and reinstalled via "engine-setup". Is that = what you mean=85? >>=20 >>=20 >>=20 >> In the mean time, the fact that even if I resolve the issue of = oVirtEngine I will not be able to connect to the oVirt Nodes unless I = have DNS resolution, apparently means I should do something with = resolving via DNS in my home LAN (i.e implement some sort of "DNS Cache" = so I can resolve my home computers via DNS inside my LAN). >>=20 >> Any suggestions are MORE THAN WELCOME=85!!! >> =20 >=20 > Having setup ovirt more than I can count right now I share your = feeling that it isn't always clear why things are going wrong, but in = this case I suspect that there is a rather small thing missing. > In short if you setup ovirt-engine, either using virtualbox or on real = hardware, and you give your host a meaningfull name AND you add that = info also in your /etc/hosts file than things SHOULD work, no need for = dnsmasq or even bind. Would make things easier once you start adding = virt hosts to you infrastructure since you will need to duplicate these = actions on each host (add engine name/ip to each host and add each host = to the others and all hosts to engine) >=20 > Just ask if you need more assistance and I will write down a small = howto that should work out of the box else I might have some time to see = if I can get things going. >=20 > Regards, >=20 > Joop >=20 --Apple-Mail=_DF4BF6D1-1F87-4F60-9CF9-070D4D836241 Content-Transfer-Encoding: quoted-printable Content-Type: text/html; charset=windows-1252 <html><head><meta http-equiv=3D"Content-Type" content=3D"text/html = charset=3Dwindows-1252"></head><body style=3D"word-wrap: break-word; = -webkit-nbsp-mode: space; -webkit-line-break: after-white-space; ">I = can't agree with you more.  Modifying every box's or Virtual = Machine's HOSTS file with a FQDN and IP SHOULD work, but in my case it = is not.  There are several reasons I've come to believe could be = the problem during my trial-and-errors testing and = learning.<div><div> </div><div>FIRST - MACHINE IPs.</div><ul = class=3D"MailOutline"><li>THe machine's "Names" where not appearing in = the Microsoft Active Directory DHCP along with their assigned = IPs; in other words, the DHCP just showed an "Assigned IP", equal to the = Linux Machine's IP, with a <empty> ('i.e. blank, none, silch, plan = old "no-letters-or-numbers") "Name" in the "Name" (i.e. machines = "network name", or FQDN-value used by the Windows AD DNS-service) = column.  </li><li>if your IP is is appearing with an <empty> = "name", there is no "host name" to associate the IP, it makes it = difficult to define a FQDN; which isn't that useful if we're going to = use the HOSTS files in all participating machines in an oVirt = Installation.</li><li>I kept banging my head for three (3) long hours = trying to find the problem.</li><ul><li>In Fedora 18, I could't find = where the "network name" of the machine could be defined. =  </li><li>I tried putting the "Additional Search Domains" and/or = "DHCP Client ID" in Fedora's 18 Desktop - under "System Settings > = Hardware > Network > Options > IPv4 Setting"</li><ul><li>The = DHCP went crazy;  showing an "Aberrant-MAC-Address" (i.e. a really = long-sting value where the machine's MAC address should be), and we knew = the MAC address as we obtained using "ifconfig" on the machine getting = it's IP from the DHCP.  So we reverted these entries from the = aforementioned, rebooted, and got an assigned IP, with proper MAC = address, but still no "Name"</li></ul><li>Kept wondering around the = "Settings" and seeing which one made sense, but what the heck, I went = for it.  </li><ul><li>Under "System Settings > System > = Details" I found the information about GNOME and the machine's hardware. =  </li><li>There was a field for "Device Name" that originally had = "localhost.localdomain"; I changed the value to "ovirtmanager". and = under "Graphic" changed to "Forced Fallback Mode" to "ON". =  </li><li>I also installed all Kerberos libraries and client (i.e. = authconfig-gtk, authhub, authhub-client, krb5-apple-clents, = krb5-auth-dialog, krb5-workstation, pam-kcoda, pam-krb5, root-net.krb5) = and rebooted</li><li>VOILA=85!!!  </li></ul><li>I don;t know if it = was the definition of "Device Name" from "localhost.localdomain" to = "ovirtengine", of the Kerberos libraries install, or both.  But = finally the MS AD DHCP was showing the Addigned-IP, the machine "Name" = and the proper MAC-address.  Regardless, setting the machine's = "Network Name" under "System Settings > System > Details = > Device Name", with no explanation of what "Device Name" meant = or was used for, was the last place I would have imagined this = network setting could be defined.</li><li>NOTE - Somebody has to = try the two steps I did together, separately. to see which one is the = real problem-solver; for me it is working, and "if it ain't broke, don't = fix it=85"</li></ul></ul><div> </div><div>Now that I have the DHCP / = IP thing sorted, I have to do the DNS stuff.</div><div> </div><div>To = this point, I've addressed the DHCP and "Network Name" of the IP-Lease = (required for the DNS to work).  This still does't completely = explain why, by modifying the HOSTS file (allowing be to set and IP and = non-DNS FQDN). allows me to install the oVirtEngine "as long as I = do not use default  HTTPd service parameters as suggested by the = install".  By using the HOST file to "define" FQDNs, AND = NOT using the default HTTPd suggested changes, I'm able to install the = oVirtEngine (given that I use ports 8700 and 8701) to access the = "oVirtEngine Welcome Screen", BUT NONE of the "oVirt Portals" work=85 = YET=85!!!</div><div> </div><div>More to come during the = week</div><div> </div><div>Richie</div><div = apple-content-edited=3D"true"> Jos=E9 E ("Richie") Piovanetti, MD, = MS  M: 787-615-4884 | <a = href=3D"mailto:richiepiovanetti@healthcareinfopartners.com">richiepiovanet= ti(a)healthcareinfopartners.com</a> </div> <div><d= iv>On Aug 2, 2013, at 3:10 AM, Joop <<a = href=3D"mailto:jvdwege@xs4all.nl">jvdwege(a)xs4all.nl</a>> = wrote:</div> <blockquote = type=3D"cite">Hello Ritchie, <blockquote type=3D"cite">In a = conversation via IRC, someone suggested that I activate "dnsmask" to = overcome what appears to be a DNS problem.  I'll try that other = possibility once I get home later today. In the mean time, what = do you mean by "fixing the hostname"=85?  I opened and fixed the = HOSTNAMES and changed it from "localhost-localdomain" to = "localhost.localdomain" and that made no difference.  Albeit, after = changing I didm;t restart, remove ovirtEngine ((using "engine-cleanup") = and reinstalled via "engine-setup".  Is that what you = mean=85? In the mean time, the fact that even if I = resolve the issue of oVirtEngine I will not be able to connect to the = oVirt Nodes unless I have DNS resolution, apparently means I should do = something with resolving via DNS in my home LAN (i.e implement some sort = of "DNS Cache" so I can resolve my home computers via DNS inside my = LAN). Any suggestions are MORE THAN WELCOME=85!!! =   </blockquote> Having setup ovirt more than I can count = right now I share your feeling that it isn't always clear why things are = going wrong, but in this case I suspect that there is a rather small = thing missing. In short if you setup ovirt-engine, either using = virtualbox or on real hardware, and you give your host a meaningfull = name AND you add that info also in your /etc/hosts file than things = SHOULD work, no need for dnsmasq or even bind. Would make things easier = once you start adding virt hosts to you infrastructure since you will = need to duplicate these actions on each host (add engine name/ip to each = host and add each host to the others and all hosts to = engine) Just ask if you need more assistance and I will write = down a small howto that should work out of the box else I might have = some time to see if I can get things = going. Regards, Joop </blockquote></div> </div></b= ody></html>= --Apple-Mail=_DF4BF6D1-1F87-4F60-9CF9-070D4D836241--

2 1

Re: [ovirt-users] Question about the ovirt-engine-sdk-java
by Michael Pasternak 15 May '19

15 May '19

------=_Part_1975902_834617789.1445161505459 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Hi=C2=A0Salifou, Actually java sdk is=C2=A0intentionally=C2=A0hiding transport level interna= ls so developers could stay in java domain,if your headers are static, easi= est way would be using reverse proxy in a middle to intercept requests,=C2= =A0 can you tell me why do you need this? =20 On Friday, October 16, 2015 1:14 AM, Salifou Sidi M. Malick <ssidimah@= redhat.com> wrote: =20 Hi Micheal, I have a question about the ovirt-engine-sdk-java. Is there a way to add custom request headers to each RHEVM API call? Here is an example of a request that I would like to do: $ curl -v -k \ =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 -H "ID: user1(a)ad.xyz.com" \ =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 -H "PASSWORD: Pwssd" \ =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 -H "TARGET: kobe" \ =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 https://vm0.smalick.com/api/hosts I would like to add ID, PASSWORD and TARGET as HTTP request header.=20 Thanks, Salifou ------=_Part_1975902_834617789.1445161505459 Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: quoted-printable <html><head></head><body><div style=3D"color:#000; background-color:#fff; f= ont-family:HelveticaNeue-Light, Helvetica Neue Light, Helvetica Neue, Helve= tica, Arial, Lucida Grande, sans-serif;font-size:13px"><div id=3D"yui_3_16_= 0_1_1445160422533_3555" dir=3D"ltr">Hi Salifou,</div><div id=3D"yui_3_16_0_1_144= 5160422533_3555" dir=3D"ltr"> = </div><div id=3D"yui_3_16_0_1_1445160422533_3555" dir=3D"ltr">= Actually java sdk is intentionally hidi= ng transport level internals so developers could stay in java domain,</span= ></div><div id=3D"yui_3_16_0_1_1445160422533_3555" dir=3D"ltr">if your headers are static, easiest way would= be using reverse proxy in a middle to intercept requests,  = </div><div id=3D"yui_3_16_0_1_1445160422533_3555" dir=3D"ltr"> </div><div id=3D"yui_3_16= _0_1_1445160422533_3555" dir=3D"ltr">can you tell me why do you need this?</span= > </div> <div class=3D"qtdSeparateBR"> </div><div class=3D"y= ahoo_quoted" style=3D"display: block;"> <div style=3D"font-family: Helvetic= aNeue-Light, Helvetica Neue Light, Helvetica Neue, Helvetica, Arial, Lucida= Grande, sans-serif; font-size: 13px;"> <div style=3D"font-family: Helvetic= aNeue, Helvetica Neue, Helvetica, Arial, Lucida Grande, sans-serif; font-si= ze: 16px;"> <div dir=3D"ltr"> On Friday, O= ctober 16, 2015 1:14 AM, Salifou Sidi M. Malick <ssidimah(a)redhat.com>= wrote: </div> <div class=3D"y_msg_container">Hi Mich= eal, I have a question about the ovirt-engine-sdk-java. Is th= ere a way to add custom request headers to each RHEVM API call? Here= is an example of a request that I would like to do: $ curl -v -k \<= br>          -H "ID: <a ymailto=3D"mailto:user1@ad= .xyz.com" href=3D"mailto:user1@ad.xyz.com">user1(a)ad.xyz.com</a>" \ &nbsp= ;         -H "PASSWORD: Pwssd" \     &nbsp= ;     -H "TARGET: kobe" \           <= a href=3D"https://vm0.smalick.com/api/hosts" target=3D"_blank">https://vm0.= smalick.com/api/hosts</a> I would like to add ID, PASSWORD and T= ARGET as HTTP request header. Thanks, Salifou </d= iv> </div> </div> </div></div></body></html> ------=_Part_1975902_834617789.1445161505459--

2 1

[Users] oVirt Weekly Sync Meeting Minutes -- 2012-05-23
by Mike Burns 15 May '19

15 May '19

Minutes: http://ovirt.org/meetings/ovirt/2012/ovirt.2012-05-23-14.00.html Minutes (text): http://ovirt.org/meetings/ovirt/2012/ovirt.2012-05-23-14.00.txt Log: http://ovirt.org/meetings/ovirt/2012/ovirt.2012-05-23-14.00.log.html ========================= #ovirt: oVirt Weekly Sync ========================= Meeting started by mburns at 14:00:23 UTC. The full logs are available at http://ovirt.org/meetings/ovirt/2012/ovirt.2012-05-23-14.00.log.html . Meeting summary --------------- * agenda and roll call (mburns, 14:00:41) * Status of next release (mburns, 14:05:17) * LINK: https://bugzilla.redhat.com/show_bug.cgi?id=822145 (mburns, 14:05:29) * AGREED: freeze date and beta release delayed by 1 week to 2012-06-07 (mburns, 14:12:33) * post freeze, release notes flag needs to be used where required (mburns, 14:14:21) * https://bugzilla.redhat.com/show_bug.cgi?id=821867 is a VDSM blocker for 3.1 (oschreib, 14:17:27) * ACTION: dougsland to fix upstream vdsm right now, and open a bug on libvirt augeas (oschreib, 14:21:44) * LINK: https://bugzilla.redhat.com/show_bug.cgi?id=822158 (mburns, 14:23:39) * assignee not available, update to come tomorrow (mburns, 14:24:59) * ACTION: oschreib to make sure BZ#822158 is handled quickly (oschreib, 14:25:29) * LINK: https://bugzilla.redhat.com/show_bug.cgi?id=824397 (mburns, 14:28:55) * 824397 expected to be merged prior next week's meeting (mburns, 14:29:45) * LINK: https://bugzilla.redhat.com/show_bug.cgi?id=824420 (mburns, 14:30:15) * tracker for node based on F17 (mburns, 14:30:28) * blocked by util-linux bug currently (mburns, 14:30:40) * new build expected from util-linux maintainer in next couple days (mburns, 14:30:55) * sub-project status -- engine (mburns, 14:32:49) * nothing to report outside of blockers discussed above (mburns, 14:34:00) * sub-project status -- vdsm (mburns, 14:34:09) * nothing outside of blockers above (mburns, 14:35:36) * sub-project status -- node (mburns, 14:35:43) * working on f17 migration, but blocked by util-linux bug (mburns, 14:35:58) * should be ready for freeze deadline (mburns, 14:36:23) * Review decision on Java 7 and Fedora jboss rpms in oVirt Engine (mburns, 14:36:43) * Java7 basically working (mburns, 14:37:19) * LINK: http://gerrit.ovirt.org/#change,4416 (oschreib, 14:39:35) * engine will make ack/nack statement next week (mburns, 14:39:49) * fedora jboss rpms patch is in review, short tests passed (mburns, 14:40:04) * engine ack on fedora jboss rpms and java7 needed next week (mburns, 14:44:47) * Upcoming Workshops (mburns, 14:45:11) * NetApp workshop set for Jan 22-24 2013 (mburns, 14:47:16) * already at half capacity for Workshop at LinuxCon Japan (mburns, 14:47:37) * please continue to promote it (mburns, 14:48:19) * proposal: board meeting to be held at all major workshops (mburns, 14:48:43) * LINK: http://www.ovirt.org/wiki/OVirt_Global_Workshops (mburns, 14:49:30) * Open Discussion (mburns, 14:50:12) * oVirt/Quantum integration discussion will be held separately (mburns, 14:50:43) Meeting ended at 14:52:47 UTC. Action Items ------------ * dougsland to fix upstream vdsm right now, and open a bug on libvirt augeas * oschreib to make sure BZ#822158 is handled quickly Action Items, by person ----------------------- * dougsland * dougsland to fix upstream vdsm right now, and open a bug on libvirt augeas * oschreib * oschreib to make sure BZ#822158 is handled quickly * **UNASSIGNED** * (none) People Present (lines said) --------------------------- * mburns (98) * oschreib (55) * doronf (12) * lh (11) * sgordon (8) * dougsland (8) * ovirtbot (6) * ofrenkel (4) * cestila (2) * RobertMdroid (2) * ydary (2) * rickyh (1) * yzaslavs (1) * cctrieloff (1) * mestery_ (1) * dustins (1) Generated by `MeetBot`_ 0.1.4 .. _`MeetBot`: http://wiki.debian.org/MeetBot

2 1

[QE][ACTION REQUIRED] oVirt 3.5.1 RC status - postponed
by Sandro Bonazzola 15 May '19

15 May '19

Hi, We have still blockers for oVirt 3.5.1 RC release so we need to postpone it until they'll be fixed. The bug tracker [1] shows 1 open blocker: Bug ID Whiteboard Status Summary 1160846 sla NEW Can't add disk to VM without specifying disk profile when the storage domain has more than one disk profile In order to stabilize the release a new branch ovirt-engine-3.5.1 will be created from the same git hash used for composing the RC. - ACTION: Gilad please provide ETA on above blocker, the new proposed RC date will be decided on the given ETA. Maintainers: - Please be sure that 3.5 snapshot allow to create VMs - Please be sure that no pending patches are going to block the release - If any patch must block the RC release please raise the issue as soon as possible. There are still 57 bugs [2] targeted to 3.5.1. Excluding node and documentation bugs we still have 37 bugs [3] targeted to 3.5.1. Maintainers / Assignee: - Please add the bugs to the tracker if you think that 3.5.1 should not be released without them fixed. - ACTION: Please update the target to 3.5.2 or later for bugs that won't be in 3.5.1: it will ease gathering the blocking bugs for next releases. - ACTION: Please fill release notes, the page has been created here [4] Community: - If you're testing oVirt 3.5 nightly snapshot, please add yourself to the test page [5] [1] http://bugzilla.redhat.com/1155170 [2] http://goo.gl/7G0PDV [3] http://goo.gl/6gUbVr [4] http://www.ovirt.org/OVirt_3.5.1_Release_Notes [5] http://www.ovirt.org/Testing/oVirt_3.5.1_Testing -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

2 1

[Users] Lifecycle / upgradepath
by Sven Kieske 11 May '19

11 May '19

Hi Community, Currently, there is no single document describing supported (which means: working ) upgrade scenarios. I think the project has matured enough, to have such an supported upgradepath, which should be considered in the development of new releases. As far as I know, currently it is supported to upgrade from x.y.z to x.y.z+1 and from x.y.z to x.y+1.z but not from x.y-1.z to x.y+1.z directly. maybe this should be put together in a wiki page at least. also it would be cool to know how long a single "release" would be supported. In this context I would define a release as a version bump from x.y.z to x.y+1.z or to x+1.y.z a bump in z would be a bugfix release. The question is, how long will we get bugfix releases for a given version? What are your thoughts? -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH & Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen

2 1

[Users] Nested virtualization with Opteron 2nd generation and oVirt 3.1 possible?
by Gianluca Cecchi 11 May '19

11 May '19

Hello, I have 2 physical servers with Opteron 2nd gen cpu. There is CentOS 6.3 installed and some VM already configured on them. Their /proc/cpuinfo contains ... model name : Dual-Core AMD Opteron(tm) Processor 8222 ... kvm_amd kernel module is loaded with its default enabled nested option # systool -m kvm_amd -v Module = "kvm_amd" Attributes: initstate = "live" refcnt = "15" srcversion = "43D8067144E7D8B0D53D46E" Parameters: nested = "1" npt = "1" ... I already configured a fedora 17 VM as a oVirt 3.1 Engine I'm trying to configure another VM as oVirt 3.1 node with ovirt-node-iso-2.5.5-0.1.fc17.iso It seems I'm not able to configure so that ovirt install doesn't complain. After some attempts, I tried this in my vm.xml for the cpu: <cpu mode='custom' match='exact'> <model fallback='allow'>athlon</model> <vendor>AMD</vendor> <feature policy='require' name='pni'/> <feature policy='require' name='rdtscp'/> <feature policy='force' name='svm'/> <feature policy='require' name='clflush'/> <feature policy='require' name='syscall'/> <feature policy='require' name='lm'/> <feature policy='require' name='cr8legacy'/> <feature policy='require' name='ht'/> <feature policy='require' name='lahf_lm'/> <feature policy='require' name='fxsr_opt'/> <feature policy='require' name='cx16'/> <feature policy='require' name='extapic'/> <feature policy='require' name='mca'/> <feature policy='require' name='cmp_legacy'/> </cpu> Inside node /proc/cpuinfo becomes processor : 3 vendor_id : AuthenticAMD cpu family : 6 model : 2 model name : QEMU Virtual CPU version 0.12.1 stepping : 3 microcode : 0x1000065 cpu MHz : 3013.706 cache size : 512 KB fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall mmxext fxsr_opt lm nopl pni cx16 hypervisor lahf_lm cmp_legacy cr8_legacy bogomips : 6027.41 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: 2 questions: 1) Is there any combination in xml file to give to my VM so that oVirt doesn't complain about missing hardware virtualization with this processor? 2) suppose 1) is not possible in my case and I still want to test the interface and try some config operations to see for example the differences with RHEV 3.0, how can I do? At the moment this complaint about hw virtualization prevents me to activate the node. I get Installing Host f17ovn01. Step: RHEV_INSTALL. Host f17ovn01 was successfully approved. Host f17ovn01 running without virtualization hardware acceleration Detected new Host f17ovn01. Host state was set to Non Operational. Host f17ovn01 moved to Non-Operational state. Host f17ovn01 moved to Non-Operational state as host does not meet the cluster's minimum CPU level. Missing CPU features : CpuFlags Can I lower the requirements to be able to operate without hw virtualization in 3.1? Thanks in advance, Gianluca

2 1

Need VM run once api
by Chandrahasa S 09 May '19

09 May '19

This is a multipart message in MIME format. --=_alternative 00361B2065257E90_= Content-Type: text/plain; charset="US-ASCII" Hi Experts, We are integrating ovirt with our internal cloud. Here we installed cloudinit in vm and then converted vm to template. We deploy template with initial run parameter Hostname, IP Address, Gateway and DNS. but when we power ON initial, run parameter is not getting pushed to inside the vm. But its working when we power on VM using run once option on Ovirt portal. I believe we need to power ON vm using run once API, but we are not able get this API. Can some one help on this. I got reply on this query last time but unfortunately mail got deleted. Thanks & Regards Chandrahasa S =====-----=====-----===== Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you --=_alternative 00361B2065257E90_= Content-Type: text/html; charset="US-ASCII" Hi Experts, We are integrating ovirt with our internal cloud. Here we installed cloudinit in vm and then converted vm to template. We deploy template with initial run parameter Hostname, IP Address, Gateway and DNS. but when we power ON initial, run parameter is not getting pushed to inside the vm. But its working when we power on VM using run once option on Ovirt portal. I believe we need to power ON vm using run once API, but we are not able get this API. Can some one help on this. I got reply on this query last time but unfortunately mail got deleted. Thanks & Regards Chandrahasa S =====-----=====-----===== Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you --=_alternative 00361B2065257E90_=--

5 4

[Users] importing from kvm into ovirt
by Jonathan Horne 29 Apr '19

29 Apr '19

--_000_9BE6F493F83A594DA60C45E6A09DC5AC016BA694AUSP01DAG0201co_ Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable I need to import a kvm virtual machine from a standalone kvm into my ovirt = cluster. Standalone is using local storage, and my ovirt cluster is using = iscsi. Can i please have some advice on whats the best way to get this sys= tem into ovirt? Right now i see it as copying the .img file to somewhere=85 but i have no i= dea where to start. I found this directory on one of my ovirt nodes: /rhev/data-center/mnt/blockSD/fe633237-14b2-4f8b-aedd-bbf753bcafaf/master/v= ms But inside is just directories that appear to have uuid-type of names, and = i can't tell what belongs to which vm. Any advice would be greatly appreciated. Thanks, jonathan ________________________________ This is a PRIVATE message. If you are not the intended recipient, please de= lete without copying and kindly advise us by e-mail of the mistake in deliv= ery. NOTE: Regardless of content, this e-mail shall not operate to bind SKO= POS to any order or other contract unless pursuant to explicit written agre= ement or government initiative expressly permitting the use of e-mail for s= uch purpose. --_000_9BE6F493F83A594DA60C45E6A09DC5AC016BA694AUSP01DAG0201co_ Content-Type: text/html; charset="Windows-1252" Content-ID: <41FAB2B157C43549B6577A3495BA255C(a)collaborationhost.net> Content-Transfer-Encoding: quoted-printable <html> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3DWindows-1= 252"> </head> <body style=3D"word-wrap:break-word; color:rgb(0,0,0); font-size:14px; font= -family:Calibri,sans-serif"> <div> <div> <div>I need to import a kvm virtual machine from a standalone kvm into my o= virt cluster.  Standalone is using local storage, and my ovirt cluster= is using iscsi.  Can i please have some advice on whats the best way = to get this system into ovirt?</div> </div> </div> <div> </div> <div>Right now i see it as copying the .img file to somewhere=85 but i have= no idea where to start.  I found this directory on one of my ovirt no= des:</div> <div> </div> <div>/rhev/data-center/mnt/blockSD/fe633237-14b2-4f8b-aedd-bbf753bcafaf/mas= ter/vms</div> <div> </div> <div>But inside is just directories that appear to have uuid-type of names,= and i can't tell what belongs to which vm.</div> <div> </div> <div>Any advice would be greatly appreciated.</div> <div> </div> <div>Thanks,</div> <div>jonathan</div> <hr> This is a PRIVATE message. I= f you are not the intended recipient, please delete without copying and kin= dly advise us by e-mail of the mistake in delivery. NOTE: Regardless of con= tent, this e-mail shall not operate to bind SKOPOS to any order or other contract unless pursuant to explicit wri= tten agreement or government initiative expressly permitting the use of e-m= ail for such purpose. </body> </html> --_000_9BE6F493F83A594DA60C45E6A09DC5AC016BA694AUSP01DAG0201co_--

3 2

Trying to reset password for ovirt wiki
by noc 08 Apr '19

08 Apr '19

This is a multi-part message in MIME format. --------------000005070002050708050606 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hoping someone can help me out. For some reason I keep getting the following error when I try to reset my password: Reset password * Error sending mail: Failed to add recipient: jvandewege(a)nieuwland.nl [SMTP: Invalid response code received from server (code: 554, response: 5.7.1 <jvandewege(a)nieuwland.nl>: Relay access denied)] Complete this form to receive an e-mail reminder of your account details. Since I receive the ML on this address it is definitely a working address. Tried my home account too and same error but then for my home provider, Relay denied ?? A puzzled user, Joop --------------000005070002050708050606 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body bgcolor="#FFFFFF" text="#000000"> Hoping someone can help me out. For some reason I keep getting the following error when I try to reset my password: <fieldset><legend>Reset password</legend> <div class="error"> <ul> <li>Error sending mail: Failed to add recipient: <a class="moz-txt-link-abbreviated" href="mailto:jvandewege@nieuwland.nl">jvandewege(a)nieuwland.nl</a> [SMTP: Invalid response code received from server (code: 554, response: 5.7.1 <a class="moz-txt-link-rfc2396E" href="mailto:jvandewege@nieuwland.nl"><jvandewege(a)nieuwland.nl></a>: Relay access denied)]</li> </ul> </div> Complete this form to receive an e-mail reminder of your account details. </fieldset> Since I receive the ML on this address it is definitely a working address. Tried my home account too and same error but then for my home provider, Relay denied ?? A puzzled user, Joop </body> </html> --------------000005070002050708050606--

2 1

ovirt-guest-agent issue on rhel5.5
by John Michael Mercado 08 Apr '19

08 Apr '19

Hi All, I need your help. Anyone who encounter the below error and have the solution? Can you help me how to fix this? MainThread::INFO::2015-01-27 10:22:53,247::ovirt-guest-agent::57::root::Starting oVirt guest agent MainThread::ERROR::2015-01-27 10:22:53,248::ovirt-guest-agent::138::root::Unhandled exception in oVirt guest agent! Traceback (most recent call last): File "/usr/share/ovirt-guest-agent/ovirt-guest-agent.py", line 132, in ? agent.run(daemon, pidfile) File "/usr/share/ovirt-guest-agent/ovirt-guest-agent.py", line 63, in run self.agent = LinuxVdsAgent(config) File "/usr/share/ovirt-guest-agent/GuestAgentLinux2.py", line 371, in __init__ AgentLogicBase.__init__(self, config) File "/usr/share/ovirt-guest-agent/OVirtAgentLogic.py", line 171, in __init__ self.vio = VirtIoChannel(config.get("virtio", "device")) File "/usr/share/ovirt-guest-agent/VirtIoChannel.py", line 150, in __init__ self._stream = VirtIoStream(vport_name) File "/usr/share/ovirt-guest-agent/VirtIoChannel.py", line 131, in __init__ self._vport = os.open(vport_name, os.O_RDWR) OSError: [Errno 2] No such file or directory: '/dev/virtio-ports/com.redhat.rhevm.vdsm' Thanks

2 1

[Users] oVirt Workshop at LinuxCon Japan 2012
by Leslie Hawthorn 08 Apr '19

08 Apr '19

Hello everyone, As part of our efforts to raise awareness of and educate more developers about the oVirt project, we will be holding an oVirt workshop at LinuxCon Japan, taking place on June 8, 2012. You can find full details of the workshop agenda on the LinuxCon Japan site. [0] Registration for the workshop is now open and is free of charge for the first 50 participants. We will also look at adding additional participant slots to the workshop based on demand. Attendees who register for LinuxCon Japan via the workshop registration link [1] will also be eligible for a discount on their LinuxCon Japan registration. Please spread the word to folks you think would find the workshop useful. If they have already registered for LinuxCon Japan, they can simply edit their existing registration to include the workshop. [0] - https://events.linuxfoundation.org/events/linuxcon-japan/ovirt-gluster-work… [1] - http://www.regonline.com/Register/Checkin.aspx?EventID=1099949 Cheers, LH -- Leslie Hawthorn Community Action and Impact Open Source and Standards @ Red Hat identi.ca/lh twitter.com/lhawthorn

2 1

[Users] Moving iSCSI Master Data
by rni＠chef.net 07 Apr '19

07 Apr '19

--========GMXBoundary282021374122634158505 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit Hi, it's me again.... I started my oVirt 'project' as a proof of concept,.. but it happend as always, it became production Now, I've to move the iSCSI Master data to the real iSCSI traget. Is there any way to do this, and to become rid of the old Master Data? Thank you for your help Hans-Joachim --========GMXBoundary282021374122634158505 Content-Type: text/html; charset="utf-8" Content-Transfer-Encoding: quoted-printable Hi, it's me again.... I started my oVirt 'project' as a proof= of concept,.. but it happend as always, it became production <img alt= =3D" " title=3D" " src=3D"http://images.gmx.com/images/outsource/applicatio= n/mailclient/mailcom/resource/mailclient/icons/blue/emoticons/animated/S_02= -516742918.gif" /> Now, I've to move the iSCSI Master data to th= e real iSCSI traget. Is there any way to do this, and to become rid of= the old Master Data? Thank you fo= r your help Hans-Joachim --========GMXBoundary282021374122634158505--

3 2

[Users] Can't access RHEV-H aka ovirt-node
by Scotto Alberto 11 Mar '19

11 Mar '19

--_004_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_ Content-Type: multipart/alternative; boundary="_000_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_" --_000_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hi all, I can't login to the hypervisor, neither as root nor as admin, neither from= another computer via ssh nor directly on the machine. I'm sure I remember the passwords. This is not the first time it happens: l= ast time I reinstalled the host. Everything worked ok for about 2 weeks, an= d then... What's going on? Is it a known behavior, somehow? Before rebooting the hypervisor, I would like to try something. RHEV Manage= r talks to RHEV-H without any problems. Can I login with RHEV-M's keys? how= ? Thank you all. Alberto Scotto [Blue] Via Cardinal Massaia, 83 10147 - Torino - ITALY phone: +39 011 29100 al.scotto(a)reply.it www.reply.it ________________________________ -- The information transmitted is intended for the person or entity to which i= t is addressed and may contain confidential and/or privileged material. Any= review, retransmission, dissemination or other use of, or taking of any ac= tion in reliance upon, this information by persons or entities other than t= he intended recipient is prohibited. If you received this in error, please = contact the sender and delete the material from any computer. --_000_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <style>  </style> </head> <body lang=3D"IT" link=3D"blue" vlink=3D"purple"> <div class=3D"WordSection1"> Hi all, I can’t login to the hype= rvisor, neither as root nor as admin, neither from another computer via ssh= nor directly on the machine. I’m sure I remember the p= asswords. This is not the first time it happens: last time I reinstalled th= e host. Everything worked ok for about 2 weeks, and then... What’s going on? Is it a = known behavior, somehow? Before rebooting the hypervisor= , I would like to try something. RHEV Manager talks to RHEV-H without any p= roblems. Can I login with RHEV-M’s keys? how?   Thank you all. </div> <div align=3D"left"> Alberto Scotto <img border=3D"0" alt=3D"Blue" src=3D"cid:bde= 5ac62d10545908e269a6006dbd5ac" style=3D"margin:0px"> Via Cardinal Massaia, 83 10147 - Torino - ITALY phone: +39 011 29100 <a href=3D"al.scotto(a)reply.it" target=3D"" style=3D"color:blue; text-decora= tion:underline">al.scotto(a)reply.it</a> <a title=3D"" href=3D"www.reply.it" target=3D"" style=3D"color:blue; text-d= ecoration:underline">www.reply.it</a>   </div> <hr> -- The information transmitted is intended for the person or entity to which i= t is addressed and may contain confidential and/or privileged material. Any= review, retransmission, dissemination or other use of, or taking of any ac= tion in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If= you received this in error, please contact the sender and delete the mater= ial from any computer. </body> </html> --_000_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_-- --_004_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_ Content-Type: image/png; name="blue.png" Content-Description: blue.png Content-Disposition: inline; filename="blue.png"; size=2834; creation-date="Tue, 11 Sep 2012 14:14:44 GMT"; modification-date="Tue, 11 Sep 2012 14:14:44 GMT" Content-ID: <bde5ac62d10545908e269a6006dbd5ac> Content-Transfer-Encoding: base64 iVBORw0KGgoAAAANSUhEUgAAAIwAAAAyCAYAAACOADM7AAAABmJLR0QA/gD+AP7rGNSCAAAACXBI WXMAAA3XAAAN1wFCKJt4AAAACXZwQWcAAACMAAAAMgCR0D3bAAAKaUlEQVR42u2ce5AUxRnAf313 3Al4eCAYFaIgyMNEUF6KlYoVIDBArDxqopWxQgViQlWsPHA0MUlZVoyKRsdSE4lGomjIaHS0UlHL wTIPpEgQFQUUjYIWdfIIScyBHi/Z6/zRM1xP3yzs7t3unOX8qra2H9M9vb3f9Pf19/WukFKSk1Mq dVkPIOejRS4wOWXR6wVGuP5I4foDsh5HjkL0VhtGuP5A4CFgNrAD+Lb0nKeyHtfHnd68wixGCQvA qcA9wvWPy3pQH3caan1D4fonAYeBDwEZjaFflAaok56zHRhsNG0B+gAHSrhHarn0nFp/3NLnxbKP B06I5kECO2UYZD2sLtRcYIBJwK+BoYBACU89cAjoAIRw/TuAJcClQGy//FJ6zvvH6ly4/qXAz4vU HQA2A4H0nIcz+OxH41eAHaU3AhdkPaA0MrFhhOuPB2YA5wBnA6ehni5dgKcBu4C5wLZS7Rfh+g8A 80u49HHgEuk5h2s+AeaYLbsO2AKMiIqWyzBYkPW40shihUF6zkbUUwSAcP0G4FHgS9pl10rPmQMs LbXfSBVNLPHyrwDfBO7JYg4MRqEempjnsh5QMXqL0Xsl8EUt3w5cXUE/w4AztfzzwGSUGrwoyuvM yfqDR5yLUssxL2U9oGJkssLoCNdfjLJXdBZIz9lQQXcTgSYt/4z0nHjy1wvX3wW8oNX3O8q4TgKm AGegjNB/As9JzzmYer1lTwKGoOyyV2UYtArLngLMQ9lh64EVRQxZ3V5pje4V9zsVGBRl22QYrDXu e0HUvwD+K8NgXbe/lKOQqcAI178MuM0ovk16zqMVdjnNyL9g5E2DrTVlTP1RRvM3gIFG9RvC9RdK z/lHoo2yQQJgeFR0hbDsT6FUns544Icp456qpV+RYaAL5RJgepR+FWXzxfcdA6zRrr0SqKrAZKaS hOt/DbjXKH5Geo7bjW71iT8AvGLUzzXyfzfGNBBlPyymq7AAjAWeFK5/slE+AvhklC4At6KEZb9x 3cJo+9x5T8s+ERinFa012uzU0vuMuu9r6W3AXd2Yu5LIRGCE618E/D6l6rpu9Hk8MEEr2iQ9p1Wr n4wShJgPgCeMbh6g02jeB9wILASe1q4ZBHzBaDeRThukHghRdskoQF+NmlH+JJ0JqB1ijCkw72np jiOfx7JPQrkdYm6QYXBMH1V3qYlKEq7fhNLvw1CTeztK55rcJlz/s8XshGPwaeBELd8sXP961Bd4 Bsqo1u2bm6Tn7NbGeCHKMI6ZLz3nsajuT6gtfjxfpxr31lXhThkG8470a9mrtPp2uq4652np94FN Rr0uMM1a+jI6fVTvAMsrmLOy6VGBEa5fB3wOpctHaK9TgVOAxmN0MRXlwPpWBbefYuTHAj8tcu39 0nNuMMq+qqXfjoUl4mSSq/HbRlv9S3/ZqBumpXcB/zPqz9fSm2UY/Nuo1wWmCUBYdiPwHa3ck2Hw YQVzVjbVWGFmkW7YmewDfga8CNwHnB6VXyZcf7X0nAfLvG8pntE3gSXSc5an1Olf+hDh+i+jVieJ UiOxwBSiMQMgLLsFOEtr+7xWB8rQjdkgw0BXK40o1RWTZrDu0dKx0X4xylMOynZZVuZcVUyPCoz0 nA7gR8L1N6FWmQIqZtRGpwoSwF7gRek5WwCE658P3A9Y0TV3C9ffUOrWOlrZdIfdXuBhlCqaqZU/ myYs0RZaNzybUV7oNFqBt7T8BJJ2iW6zDAPGFKkDGE1yBTLtF0gKTCF6/4FWtsTYVVWVqtgw0nNW lHn9LmCOcP2bgKuAvsAtqNWqFGLVF7NGes4i4fpjgNfpFNbzi7QfD/TX8vtQMa40VkvPKWh5fWfW DuhCfg5Ju8nc5k/RxpZYuTR0gWkTlj0D5YgEeJca2S4xvcXTC4D0nKvpdNWXc2hqEiqSHROrhR0k bYAzhesPTmmvG61tKAE6PXoNRRnTg6OX6VvRhfB1GQa7tbyu5v6D8qNQpH4bsDVlbLrADACu0fK/ qOXqAr1MYCLip7AcI+48I78WIIpuv6mVN5NUPWntN0nP2So9p016ThtwEKU6RpIMOyAsuw9JVWiu INO19AYZBma0fbKWXi/DoEBX9tBpu4wDLozS2+jqx6o6vVFgYt+JKKON/pTvJ6kWzKc6LTg5XEtv MeruAF5DqbZVgH6IayTJoOHf4oSw7LNICuKTeqfCsj9BUnhN+yamPXqZc3JrLfwuJpnHklKIBaa+ lIuF67eQ3KW8HtlEMabhPCmlG/3JnhX5ZHaifDeLtLqlxpmcySQfuvnCstdH6WXaZ9iPMsJ1xpOM ZaXZL6DsqfcB3UO8A7WzrDm9T2DqG7dTOHSIEgUGIc5GyhatZJ1Rv4HkmZ/xKb08o5UPRa0UkuQT vY6uQVJTFc5D7fQ6SNpUN8ow2GVcq7sB2ugq2DGHUYfLdG6SYbCPDMhcYIRlJwWjcGg/Z1/yATBE zJxXT0Pf4o0P7pWcO39W4nuVHS+JGfPq6dMXOjpgzNyt9En0MUF877fDee3x1iPlo2beTOPxnwGh qzahuhUAjwCLpOeYKkDfIT2BUl1XkxT2+2QYXJ8yen0H+JYMgz2kY9o126mh38UkITBRYGwp5e1Q usNjwL/Ql3VRX2D35mUI0UB90wyOZmc19i+wa+NB+vTrnMA9re00RO3q6iRbVtYxeOzt1NXHS3od e96dRkPT6CN9v/HUIRr738Dg0bMRDSdQVzeAjsJh+ra8SfMpf5S3XNzFoSYsewhJVbhKhoEnLDtE HV4vRGXPprQFFTdrRklk2u4opoVkyMOTYbCfjEgc0RSWPQhlQ/SruMfymCrD4IXud1N7In+ILgzT ZRj8tYfvcSLwOzoPer0DjKv1VlrHVEltqBhMafZD99mR1QfvAXT1tYfiNkhZCMvuD1yLCtbORsXg Yi7PUljAEJgoztFaYV8fN8yg4XsV95TkLJS32+QaGQZPl9tZT5O50ftRJLL1Pq8V9cjqEjHdyG8D rpdhkJmhq5MLTGX0QR2diLdnYQ/2vRq1wsRe6nUyDNq712XP0Wt/W53TO+mNoYGcXkwuMDll0eM2 TPRbnGnAvaaDSVj2bOA0GQY1j7Lm9AzVWGG+jIrwphlH3wXuzvpD51RONXZJ7aizLFcIyx4O3CXD IN527kUdJAJAWPbFqBXnVmHZV6FO3K+I6oahzgYPAX7T017UnMqoxgpTQAniONRJ/AeFZRc72+IA P47SPwEWAAjLbgL+jPJ1NAF/EZZd6o/sc6pINQSmARAyDL6OOm45mmSoX+cDVDiC6D0+azI0arcS FSkG9fcgORlTbcfdXtR5jqOdnpPGO3QK8nzU33KsoutvgXIyoBorjP7FN6OEsph3sE6rq9fS8RmQ RTIMTgP+QPJsbk5GVENgjgMQlv0QcDnwBp0nxgaQ/O+6dmCUsOxHUGdj459kbI/a3Sksew3qjE5L 1pOVUx2VtBJljxxAhf3v0v4TZRnKmI25ObruLdTZkvcAZBgcEpY9E3BRu6TrZBisznqycvJYUk6Z 5KGBnLLIBSanLHKBySmLXGByyiIXmJyy+D/P9uGVPOu6DAAAACh6VFh0U29mdHdhcmUAAHja801M LsrPTU3JTFRwyyxKLc8vyi5WsAAAYBUIJ4KDNosAAAAASUVORK5CYII= --_004_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_--

3 2

Unable to make Single Sign on working on Windows 7 Guest
by Felipe Herrera Martinez 11 Mar '19

11 Mar '19

On the case I'll be able to create an installer, what is the name of the Application need to be there, in order to ovirt detects that Ovirt Guest agent is installed? I have created an installer adding OvirtGuestService files and the Product Name to be shown, a part of the command line post installs.. I have tried with "ovirt-guest-agent" and "Ovirt guest agent" Names for the application installed on Windows 7 guest and even both are presented on ovirt VM Applications tab, on any case LogonVDScommand appears. There is other option to make it work now? Thanks in advance, Felipe

3 5

Re: [ovirt-users] Need VM run once api
by Chandrahasa S 11 Mar '19

11 Mar '19

This is a multipart message in MIME format. --=_alternative 00199D2865257E91_= Content-Type: text/plain; charset="US-ASCII" Can any one help on this. Thanks & Regards Chandrahasa S From: Chandrahasa S/MUM/TCS To: users(a)ovirt.org Date: 28-07-2015 15:20 Subject: Need VM run once api Hi Experts, We are integrating ovirt with our internal cloud. Here we installed cloudinit in vm and then converted vm to template. We deploy template with initial run parameter Hostname, IP Address, Gateway and DNS. but when we power ON initial, run parameter is not getting pushed to inside the vm. But its working when we power on VM using run once option on Ovirt portal. I believe we need to power ON vm using run once API, but we are not able get this API. Can some one help on this. I got reply on this query last time but unfortunately mail got deleted. Thanks & Regards Chandrahasa S =====-----=====-----===== Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you --=_alternative 00199D2865257E91_= Content-Type: text/html; charset="US-ASCII" Can any one help on this. Thanks & Regards Chandrahasa S From:        Chandrahasa S/MUM/TCS To:        users(a)ovirt.org Date:        28-07-2015 15:20 Subject:        Need VM run once api <hr noshade> Hi Experts, We are integrating ovirt with our internal cloud. Here we installed cloudinit in vm and then converted vm to template. We deploy template with initial run parameter Hostname, IP Address, Gateway and DNS. but when we power ON initial, run parameter is not getting pushed to inside the vm. But its working when we power on VM using run once option on Ovirt portal. I believe we need to power ON vm using run once API, but we are not able get this API. Can some one help on this. I got reply on this query last time but unfortunately mail got deleted. Thanks & Regards Chandrahasa S =====-----=====-----===== Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you --=_alternative 00199D2865257E91_=--

3 3

Re: [ovirt-users] Problem Windows guests start in pause
by Dafna Ron 11 Mar '19

11 Mar '19

Hi Lucas, Please send mails to the list next time. can you please do rpm -qa |grep qemu. also, can you try a different windows image? Thanks, Dafna On 07/14/2014 02:03 PM, lucas castro wrote: > On the host there I've tried to run the vm, I use a centOS 6.5 > and checked, no update for qemu, libvirt or related package. -- Dafna Ron

3 3

Feature: Hosted engine VM management
by Roy Golan 27 Feb '19

27 Feb '19

Hi all, Upcoming in 3.6 is enhancement for managing the hosted engine VM. In short, we want to: * Allow editing the Hosted engine VM, storage domain, disks, networks etc * Have a shared configuration for the hosted engine VM * Have a backup for the hosted engine VM configuration please review and comment on the wiki below: http://www.ovirt.org/Hosted_engine_VM_management Thanks, Roy

2 3

Re: [ovirt-users] Packet loss
by Doron Fediuck 26 Feb '19

26 Feb '19

----_com.android.email_640187878761650 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: base64 SGkgS3lsZSzCoApXZSBtYXkgaGF2ZSBzZWVuIHNvbWV0aGluZyBzaW1pbGFyIGluIHRoZSBwYXN0 IGJ1dCBJIHRoaW5rIHRoZXJlIHdlcmUgdmxhbnMgaW52b2x2ZWQuwqAKSXMgaXQgdGhlIHNhbWUg Zm9yIHlvdT/CoApUb255IC8gRGFuLCBkb2VzIGl0IHJpbmcgYSBiZWxsP8Kg ----_com.android.email_640187878761650 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: base64 PGh0bWw+PGhlYWQ+PG1ldGEgaHR0cC1lcXVpdj0iQ29udGVudC1UeXBlIiBjb250ZW50PSJ0ZXh0 L2h0bWw7IGNoYXJzZXQ9VVRGLTgiPjwvaGVhZD48Ym9keSA+PGRpdj5IaSBLeWxlLCZuYnNwOzwv ZGl2PjxkaXY+V2UgbWF5IGhhdmUgc2VlbiBzb21ldGhpbmcgc2ltaWxhciBpbiB0aGUgcGFzdCBi dXQgSSB0aGluayB0aGVyZSB3ZXJlIHZsYW5zIGludm9sdmVkLiZuYnNwOzwvZGl2PjxkaXY+SXMg aXQgdGhlIHNhbWUgZm9yIHlvdT8mbmJzcDs8L2Rpdj48ZGl2PlRvbnkgLyBEYW4sIGRvZXMgaXQg cmluZyBhIGJlbGw/Jm5ic3A7PC9kaXY+PC9ib2R5PjwvaHRtbD4= ----_com.android.email_640187878761650--

2 1

Unable to backend oVirt with Cinder
by Logan Kuhn 21 Jun '18

21 Jun '18

------=_Part_51316288_608143832.1472587678781 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit I've got Cinder configured and pointed at Ceph for it's back end storage. I can run ceph commands on the cinder machine and cinder is configured for noauth and I've also tried it with Keystone for auth. I can run various cinder commands and it'll return as expected. When I configure it in oVirt it'll add the external provider fine, but when I go to create a disk it doesn't populate the volume type field, it's just empty. The corresponding command for cinder: cinder type-list and cinder type-show <name> returns fine and it is public. Ovirt and Cinder are on the same host so it isn't a firewall issue. Cinder config: [DEFAULT] rpc_backend = rabbit #auth_strategy = keystone auth_strategy = noauth enabled_backends = ceph #glance_api_servers = http://10.128.7.252:9292 #glance_api_version = 2 #[keystone_authtoken] #auth_uri = http://10.128.7.252:5000/v3 #auth_url = http://10.128.7.252:35357/v3 #auth_type = password #memcached_servers = localhost:11211 #project_domain_name = default #user_domain_name = default #project_name = services #username = user #password = pass [ceph] volume_driver = cinder.volume.drivers.rbd.RBDDriver volume_backend_name = ceph rbd_pool = ovirt-images rbd_user = cinder rbd_secret_uuid = <secret> rbd_ceph_conf = /etc/ceph/ceph.conf rbd_flatten_volume_from_snapshot = true rbd_max_clone_depth = 5 rbd_store_chunk_size = 4 rados_connect_timeout = -1 #glance_api_version = 2 [database] connection = postgresql://user:pass@10.128.2.33/cinder [oslo_concurrency] lock_path = /var/lib/cinder/tmp [oslo_messaging_rabbit] rabbit_host = localhost rabbit_port = 5672 rabbit_userid = user rabbit_password = pass Regards, Logan ------=_Part_51316288_608143832.1472587678781 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable <html><body><div style=3D"font-family: Arial; font-size: 12pt; color: #0000= 00"><div>I've got Cinder configured and pointed at Ceph for it's back end s= torage.  I can run ceph commands on the cinder machine and cinder is c= onfigured for noauth and I've also tried it with Keystone for auth.  I= can run various cinder commands and it'll return as expected. </= div><div> </div><div>When I configure it in oVirt i= t'll add the external provider fine, but when I go to create a disk it does= n't populate the volume type field, it's just empty.  The correspondin= g command for cinder: cinder type-list and cinder type-show <name> re= turns fine and it is public. </div><div> </div= ><div>Ovirt and Cinder are on the same host so it isn't a firewall issue.</= div><div> </div><div>Cinder config:</div><div>[DEFA= ULT] rpc_backend =3D rabbit #auth_strategy =3D keystone auth_strat= egy =3D noauth enabled_backends =3D ceph #glance_api_servers =3D http= ://10.128.7.252:9292 #glance_api_version =3D 2 #[keystone_authtok= en] #auth_uri =3D http://10.128.7.252:5000/v3 #auth_url =3D http://10= .128.7.252:35357/v3 #auth_type =3D password #memcached_servers =3D lo= calhost:11211 #project_domain_name =3D default #user_domain_name =3D = default #project_name =3D services #username =3D user #passwo= rd =3D pass [ceph] volume_driver =3D cinder.volume.drivers.rbd.RB= DDriver volume_backend_name =3D ceph rbd_pool =3D ovirt-images rbd= _user =3D cinder rbd_secret_uuid =3D <secret> rbd_ceph_con= f =3D /etc/ceph/ceph.conf rbd_flatten_volume_from_snapshot =3D true r= bd_max_clone_depth =3D 5 rbd_store_chunk_size =3D 4 rados_connect_tim= eout =3D -1 #glance_api_version =3D 2 [database] connection = =3D postgresql://user:pass@10.128.2.33/cinder [oslo_concurrency] = lock_path =3D /var/lib/cinder/tmp [oslo_messaging_rabbit] rabbit_= host =3D localhost rabbit_port =3D 5672 rabbit_userid =3D <span = style=3D"color: #000000; font-family: Arial; font-size: 16px; font-style: n= ormal; font-variant-ligatures: normal; font-variant-caps: normal; font-weig= ht: normal; letter-spacing: normal; line-height: normal; orphans: 2; text-a= lign: start; text-indent: 0px; text-transform: none; white-space: normal; w= idows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; display: inlin= e !important; float: none; background-color: #ffffff;" data-mce-style=3D"co= lor: #000000; font-family: Arial; font-size: 16px; font-style: normal; font= -variant-ligatures: normal; font-variant-caps: normal; font-weight: normal;= letter-spacing: normal; line-height: normal; orphans: 2; text-align: start= ; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; w= ord-spacing: 0px; -webkit-text-stroke-width: 0px; display: inline !importan= t; float: none; background-color: #ffffff;">user rabbit_password = =3D <span style=3D"color: #000000; font-family: Arial; font-size: 16px= ; font-style: normal; font-variant-ligatures: normal; font-variant-caps: no= rmal; font-weight: normal; letter-spacing: normal; line-height: normal; orp= hans: 2; text-align: start; text-indent: 0px; text-transform: none; white-s= pace: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px;= display: inline !important; float: none; background-color: #ffffff;" data-= mce-style=3D"color: #000000; font-family: Arial; font-size: 16px; font-styl= e: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-= weight: normal; letter-spacing: normal; line-height: normal; orphans: 2; te= xt-align: start; text-indent: 0px; text-transform: none; white-space: norma= l; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; display: i= nline !important; float: none; background-color: #ffffff;">pass</div= ><div> </div><div data-marker=3D"__SIG_PRE__">Regards, Logan</div></d= iv></body></html> ------=_Part_51316288_608143832.1472587678781--

4 4

HostedEngine with HA
by Carlos Rodrigues 22 Mar '18

22 Mar '18

Hello, I have one cluster with two hosts with power management correctly configured and one virtual machine with HostedEngine over shared storage with FiberChannel. When i shutdown the network of host with HostedEngine VM, it should be possible the HostedEngine VM migrate automatically to another host? What is the expected behaviour on this HA scenario? Regards, -- Carlos Rodrigues Engenheiro de Software Sénior Eurotux Informática, S.A. | www.eurotux.com (t) +351 253 680 300 (m) +351 911 926 110

4 30

ovirt-ha-agent cpu usage
by Gianluca Cecchi 27 Apr '17

27 Apr '17

Hello, I have a test machine that is a nuc6 with an i5 and 32G of ram and SSD disks. It is configured as a single host environment with Self Hosted Engine VM. Both host and SHE are CentOS 7.2 and oVirt version is 3.6.6.2-1.el7 I notice that having 3 VMs powered on and making nothing special (engine VM, a CentOS 7 VM and a Fedora 24 VM) the ovirt-ha-agent process on host often spikes its cpu usage. See for example this quick video with top command running on host that reflects what happens continuously. https://drive.google.com/file/d/0BwoPbcrMv8mvYUVRMFlLVmxRdXM/view?usp=shari… Is it normal that ovirt-ha-agent consumes all this amount of cpu? Going into /var/log/ovirt-hosted-engine-ha/agent.log I see nothing special, only messages of type "INFO". The same for broker.log Thanks, Gianluca

8 29

Hosted engine Single Sign-On to VM with freeIPA not working
by Paul 21 Apr '17

21 Apr '17

This is a multipart message in MIME format. ------=_NextPart_000_0050_01D18069.35C995E0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Hi, I am having an issue with getting SSO to work when a standard user(UserRole) logs in to the UserPortal. The user has permission to use only this VM, so after login the console is automatically opened for that VM. Problem is that it doesn't login on the VM system with the provided credentials. Manual login at the console works without any issues. HBAC-rule check on IPA shows access is granted. Client has SELINUX in permissive mode and a disabled firewalld. On the client side I do see some PAM related errors in the logs (see details below). Extensive Google search on error 17 "Failure setting user credentials" didn't show helpful information :-( AFAIK this is did a pretty standard set-up, all working with RH-family products. I would expect others to encounter this issue as well. If someone knows any solution or has some directions to fix this it would be greatly appreciated. Thanks, Paul ------------------------------------------------------ System setup: I have 3 systems The connection between the Engine and IPA is working fine. (I can log in with IPA users etc.) Connection is made according to this document: https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Virtualizat ion/3.6/html-single/Administration_Guide/index.html#sect-Configuring_an_Exte rnal_LDAP_Provider Configuration of the client is done according to this document: https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Virtualizat ion/3.6/html/Virtual_Machine_Management_Guide/chap-Additional_Configuration. html#sect-Configuring_Single_Sign-On_for_Virtual_Machines --- Hosted Engine: [root@engine ~]# cat /etc/redhat-release CentOS Linux release 7.2.1511 (Core) [root@engine ~]# uname -a Linux engine.DOMAIN.COM 3.10.0-327.10.1.el7.x86_64 #1 SMP Tue Feb 16 17:03:50 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux [root@engine ~]# rpm -qa | grep ovirt ovirt-vmconsole-1.0.0-1.el7.centos.noarch ovirt-engine-restapi-3.6.2.6-1.el7.centos.noarch ovirt-setup-lib-1.0.1-1.el7.centos.noarch ovirt-engine-setup-plugin-ovirt-engine-common-3.6.3.4-1.el7.centos.noarch ovirt-engine-setup-3.6.3.4-1.el7.centos.noarch ovirt-image-uploader-3.6.0-1.el7.centos.noarch ovirt-engine-extension-aaa-jdbc-1.0.5-1.el7.noarch ovirt-host-deploy-1.4.1-1.el7.centos.noarch ovirt-engine-extension-aaa-ldap-setup-1.1.2-1.el7.centos.noarch ovirt-engine-wildfly-overlay-8.0.4-1.el7.noarch ovirt-engine-wildfly-8.2.1-1.el7.x86_64 ovirt-vmconsole-proxy-1.0.0-1.el7.centos.noarch ovirt-engine-tools-3.6.2.6-1.el7.centos.noarch ovirt-engine-dbscripts-3.6.2.6-1.el7.centos.noarch ovirt-engine-backend-3.6.2.6-1.el7.centos.noarch ovirt-engine-3.6.2.6-1.el7.centos.noarch ovirt-engine-extension-aaa-ldap-1.1.2-1.el7.centos.noarch ovirt-engine-setup-base-3.6.3.4-1.el7.centos.noarch ovirt-engine-setup-plugin-ovirt-engine-3.6.3.4-1.el7.centos.noarch ovirt-engine-setup-plugin-websocket-proxy-3.6.3.4-1.el7.centos.noarch ovirt-engine-vmconsole-proxy-helper-3.6.3.4-1.el7.centos.noarch ovirt-engine-cli-3.6.2.0-1.el7.centos.noarch ovirt-host-deploy-java-1.4.1-1.el7.centos.noarch ovirt-engine-userportal-3.6.2.6-1.el7.centos.noarch ovirt-engine-webadmin-portal-3.6.2.6-1.el7.centos.noarch ovirt-guest-agent-common-1.0.11-1.el7.noarch ovirt-release36-003-1.noarch ovirt-iso-uploader-3.6.0-1.el7.centos.noarch ovirt-engine-lib-3.6.3.4-1.el7.centos.noarch ovirt-engine-sdk-python-3.6.3.0-1.el7.centos.noarch ovirt-engine-setup-plugin-vmconsole-proxy-helper-3.6.3.4-1.el7.centos.noarch ovirt-engine-websocket-proxy-3.6.3.4-1.el7.centos.noarch ovirt-log-collector-3.6.1-1.el7.centos.noarch ovirt-engine-extensions-api-impl-3.6.3.4-1.el7.centos.noarch --- FreeIPA: [root@ipa01 ~]# cat /etc/redhat-release CentOS Linux release 7.2.1511 (Core) [root@ipa01 ~]# uname -a Linux ipa01.DOMAIN.COM 3.10.0-327.10.1.el7.x86_64 #1 SMP Tue Feb 16 17:03:50 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux [root@ipa01 ~]# rpm -qa | grep ipa ipa-python-4.2.0-15.el7_2.6.x86_64 ipa-client-4.2.0-15.el7_2.6.x86_64 python-libipa_hbac-1.13.0-40.el7_2.1.x86_64 python-iniparse-0.4-9.el7.noarch libipa_hbac-1.13.0-40.el7_2.1.x86_64 sssd-ipa-1.13.0-40.el7_2.1.x86_64 ipa-admintools-4.2.0-15.el7_2.6.x86_64 ipa-server-4.2.0-15.el7_2.6.x86_64 ipa-server-dns-4.2.0-15.el7_2.6.x86_64 --- Client: [root@test06 ~]# cat /etc/redhat-release CentOS Linux release 7.2.1511 (Core) [root@test06 ~]# uname -a Linux test06.DOMAIN.COM 3.10.0-327.10.1.el7.x86_64 #1 SMP Tue Feb 16 17:03:50 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux [root@test06 ~]# rpm -qa | grep ipa python-libipa_hbac-1.13.0-40.el7_2.1.x86_64 python-iniparse-0.4-9.el7.noarch sssd-ipa-1.13.0-40.el7_2.1.x86_64 ipa-client-4.2.0-15.0.1.el7.centos.6.x86_64 libipa_hbac-1.13.0-40.el7_2.1.x86_64 ipa-python-4.2.0-15.0.1.el7.centos.6.x86_64 device-mapper-multipath-0.4.9-85.el7.x86_64 device-mapper-multipath-libs-0.4.9-85.el7.x86_64 [root@test06 ~]# rpm -qa | grep guest-agent qemu-guest-agent-2.3.0-4.el7.x86_64 ovirt-guest-agent-pam-module-1.0.11-1.el7.x86_64 ovirt-guest-agent-gdm-plugin-1.0.11-1.el7.noarch ovirt-guest-agent-common-1.0.11-1.el7.noarch --------------------------------------------------- Relevant logs: --- Engine: //var/log/ovirt-engine/engine 2016-03-17 15:22:10,516 INFO [org.ovirt.engine.core.bll.aaa.LoginUserCommand] (default task-22) [] Running command: LoginUserCommand internal: false. 2016-03-17 15:22:10,568 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-22) [] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: User test6@DOMAIN logged in. 2016-03-17 15:22:13,795 WARN [org.ovirt.engine.core.dal.job.ExecutionMessageDirector] (default task-6) [7400ae46] The message key 'VmLogon' is missing from 'bundles/ExecutionMessages' 2016-03-17 15:22:13,839 INFO [org.ovirt.engine.core.bll.VmLogonCommand] (default task-6) [7400ae46] Running command: VmLogonCommand internal: false. Entities affected : ID: 64a84b40-6050-4a96-a59d-d557a317c38c Type: VMAction group CONNECT_TO_VM with role type USER 2016-03-17 15:22:13,842 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.VmLogonVDSCommand] (default task-6) [7400ae46] START, VmLogonVDSCommand(HostName = host01, VmLogonVDSCommandParameters:{runAsync='true', hostId='225157c0-224b-4aa6-9210-db4de7c7fc30', vmId='64a84b40-6050-4a96-a59d-d557a317c38c', domain='DOMAIN-authz', password='***', userName='test6@DOMAIN'}), log id: 2015a1e0 2016-03-17 15:22:14,848 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.VmLogonVDSCommand] (default task-6) [7400ae46] FINISH, VmLogonVDSCommand, log id: 2015a1e0 2016-03-17 15:22:15,317 INFO [org.ovirt.engine.core.bll.SetVmTicketCommand] (default task-18) [10dad788] Running command: SetVmTicketCommand internal: true. Entities affected : ID: 64a84b40-6050-4a96-a59d-d557a317c38c Type: VMAction group CONNECT_TO_VM with role type USER 2016-03-17 15:22:15,322 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.SetVmTicketVDSCommand] (default task-18) [10dad788] START, SetVmTicketVDSCommand(HostName = host01, SetVmTicketVDSCommandParameters:{runAsync='true', hostId='225157c0-224b-4aa6-9210-db4de7c7fc30', vmId='64a84b40-6050-4a96-a59d-d557a317c38c', protocol='SPICE', ticket='rd8avqvdBnRl', validTime='120', userName='test6', userId='10b2da3e-6401-4a09-a330-c0780bc0faef', disconnectAction='LOCK_SCREEN'}), log id: 72efb73b 2016-03-17 15:22:16,340 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.SetVmTicketVDSCommand] (default task-18) [10dad788] FINISH, SetVmTicketVDSCommand, log id: 72efb73b 2016-03-17 15:22:16,377 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-18) [10dad788] Correlation ID: 10dad788, Call Stack: null, Custom Event ID: -1, Message: User test6@DOMAIN initiated console session for VM test06 2016-03-17 15:22:19,418 INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler_Worker-53) [] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: User test6@DOMAIN-authz is connected to VM test06. --- Client: /var/log/ovirt-guest-agent/ovirt-guest-agent.log MainThread::INFO::2016-03-17 15:20:58,145::ovirt-guest-agent::57::root::Starting oVirt guest agent CredServer::INFO::2016-03-17 15:20:58,214::CredServer::257::root::CredServer is running... Dummy-1::INFO::2016-03-17 15:20:58,216::OVirtAgentLogic::294::root::Received an external command: lock-screen... Dummy-1::INFO::2016-03-17 15:22:13,104::OVirtAgentLogic::294::root::Received an external command: login... Dummy-1::INFO::2016-03-17 15:22:13,104::CredServer::207::root::The following users are allowed to connect: [0] Dummy-1::INFO::2016-03-17 15:22:13,104::CredServer::273::root::Opening credentials channel... Dummy-1::INFO::2016-03-17 15:22:13,105::CredServer::132::root::Emitting user authenticated signal (651416). CredChannel::INFO::2016-03-17 15:22:13,188::CredServer::225::root::Incomming connection from user: 0 process: 2570 CredChannel::INFO::2016-03-17 15:22:13,188::CredServer::232::root::Sending user's credential (token: 651416) Dummy-1::INFO::2016-03-17 15:22:13,189::CredServer::277::root::Credentials channel was closed. /var/log/secure Mar 17 15:21:07 test06 gdm-launch-environment]: pam_unix(gdm-launch-environment:session): session opened for user gdm by (uid=0) Mar 17 15:21:10 test06 polkitd[749]: Registered Authentication Agent for unix-session:c1 (system bus name :1.34 [gnome-shell --mode=gdm], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) Mar 17 15:22:13 test06 gdm-ovirtcred]: pam_sss(gdm-ovirtcred:auth): authentication failure; logname= uid=0 euid=0 tty= ruser= rhost= user=test6 Mar 17 15:22:13 test06 gdm-ovirtcred]: pam_sss(gdm-ovirtcred:auth): received for user test6: 17 (Failure setting user credentials) /var/log/sssd/krb5_child.log (debug-level 10) (Thu Mar 17 15:22:13 2016) [[sssd[krb5_child[2575]]]] [get_and_save_tgt] (0x0020): 1234: [-1765328360][Preauthentication failed] (Thu Mar 17 15:22:13 2016) [[sssd[krb5_child[2575]]]] [map_krb5_error] (0x0020): 1303: [-1765328360][Preauthentication failed] (Thu Mar 17 15:22:13 2016) [[sssd[krb5_child[2575]]]] [k5c_send_data] (0x0200): Received error code 1432158215 (Thu Mar 17 15:22:13 2016) [[sssd[krb5_child[2575]]]] [pack_response_packet] (0x2000): response packet size: [4] (Thu Mar 17 15:22:13 2016) [[sssd[krb5_child[2575]]]] [k5c_send_data] (0x4000): Response sent. (Thu Mar 17 15:22:13 2016) [[sssd[krb5_child[2575]]]] [main] (0x0400): krb5_child completed successfully /var/log/sssd/sssd_DOMAIN.COM.log (debug-level 10) (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [be_pam_handler] (0x0100): Got request with the following data (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): command: PAM_AUTHENTICATE (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): domain: DOMAIN.COM (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): user: test6 (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): service: gdm-ovirtcred (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): tty: (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): ruser: (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): rhost: (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): authtok type: 1 (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): newauthtok type: 0 (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): priv: 1 (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): cli_pid: 2570 (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): logon name: not set (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [krb5_auth_queue_send] (0x1000): Wait queue of user [test6] is empty, running request [0x7fe30df03cc0] immediately. (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [krb5_setup] (0x4000): No mapping for: test6 (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [ldb] (0x4000): Added timed event "ltdb_callback": 0x7fe30df07120 (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [ldb] (0x4000): Added timed event "ltdb_timeout": 0x7fe30df16590 (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [ldb] (0x4000): Running timer event 0x7fe30df07120 "ltdb_callback" (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [ldb] (0x4000): Destroying timer event 0x7fe30df16590 "ltdb_timeout" (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [ldb] (0x4000): Ending timer event 0x7fe30df07120 "ltdb_callback" (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [fo_resolve_service_send] (0x0100): Trying to resolve service 'IPA' (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [get_server_status] (0x1000): Status of server 'ipa01.DOMAIN.COM' is 'working' (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [get_port_status] (0x1000): Port status of port 389 for server 'ipa01.DOMAIN.COM' is 'working' (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [fo_resolve_service_activate_timeout] (0x2000): Resolve timeout set to 6 seconds (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [resolve_srv_send] (0x0200): The status of SRV lookup is resolved (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [get_server_status] (0x1000): Status of server 'ipa01.DOMAIN.COM' is 'working' (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [be_resolve_server_process] (0x1000): Saving the first resolved server (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [be_resolve_server_process] (0x0200): Found address for server ipa01.DOMAIN.COM: [10.0.1.21] TTL 1200 (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [ipa_resolve_callback] (0x0400): Constructed uri 'ldap://ipa01.DOMAIN.COM' (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sss_krb5_realm_has_proxy] (0x0040): profile_get_values failed. (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [child_handler_setup] (0x2000): Setting up signal handler up for pid [2575] (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [child_handler_setup] (0x2000): Signal handler set up for pid [2575] (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [write_pipe_handler] (0x0400): All data has been sent! (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [child_sig_handler] (0x1000): Waiting for child [2575]. (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [child_sig_handler] (0x0100): child [2575] finished successfully. (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [read_pipe_handler] (0x0400): EOF received, client finished (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [check_wait_queue] (0x1000): Wait queue for user [test6] is empty. (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [krb5_auth_queue_done] (0x1000): krb5_auth_queue request [0x7fe30df03cc0] done. (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_id_op_connect_step] (0x4000): reusing cached connection (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_print_server] (0x2000): Searching 10.0.1.21 (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_get_generic_ext_step] (0x0400): calling ldap_search_ext with [(&(cn=ipaConfig)(objectClass=ipaGuiConfig))][cn=etc,dc=DOMAIN,dc=com]. (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_get_generic_ext_step] (0x1000): Requesting attrs: [ipaMigrationEnabled] (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_get_generic_ext_step] (0x1000): Requesting attrs: [ipaSELinuxUserMapDefault] (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_get_generic_ext_step] (0x1000): Requesting attrs: [ipaSELinuxUserMapOrder] (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_get_generic_ext_step] (0x2000): ldap_search_ext called, msgid = 122 (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_op_add] (0x2000): New operation 122 timeout 60 (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_process_result] (0x2000): Trace: sh[0x7fe30deef090], connected[1], ops[0x7fe30df094a0], ldap[0x7fe30def2920] (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_process_message] (0x4000): Message type: [LDAP_RES_SEARCH_ENTRY] (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_parse_entry] (0x1000): OriginalDN: [cn=ipaConfig,cn=etc,dc=DOMAIN,dc=com]. (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_parse_range] (0x2000): No sub-attributes for [ipaMigrationEnabled] (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_parse_range] (0x2000): No sub-attributes for [ipaSELinuxUserMapDefault] (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_parse_range] (0x2000): No sub-attributes for [ipaSELinuxUserMapOrder] (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_process_result] (0x2000): Trace: sh[0x7fe30deef090], connected[1], ops[0x7fe30df094a0], ldap[0x7fe30def2920] (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_process_message] (0x4000): Message type: [LDAP_RES_SEARCH_RESULT] (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_get_generic_op_finished] (0x0400): Search result: Success(0), no errmsg set (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_op_destructor] (0x2000): Operation 122 finished (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_id_op_destroy] (0x4000): releasing operation connection (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [ipa_get_migration_flag_done] (0x0100): Password migration is not enabled. (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [be_pam_handler_callback] (0x0100): Backend returned: (0, 17, <NULL>) [Success (Failure setting user credentials)] (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [be_pam_handler_callback] (0x0100): Sending result [17][DOMAIN.COM] (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [be_pam_handler_callback] (0x0100): Sent result [17][DOMAIN.COM] (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_process_result] (0x2000): Trace: sh[0x7fe30deef090], connected[1], ops[(nil)], ldap[0x7fe30def2920] (Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_process_result] (0x2000): Trace: ldap_result found nothing! ------=_NextPart_000_0050_01D18069.35C995E0 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" = xmlns:o=3D"urn:schemas-microsoft-com:office:office" = xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" = xmlns=3D"http://www.w3.org/TR/REC-html40"><head><meta = http-equiv=3DContent-Type content=3D"text/html; = charset=3Dus-ascii"><meta name=3DGenerator content=3D"Microsoft Word 15 = (filtered medium)"><style></style></head><body lang=3DEN-US = link=3D"#0563C1" vlink=3D"#954F72"><div class=3DWordSection1>Hi,<o:p></o:p><o:p> </o:p>I am having = an issue with getting SSO to work when a standard user(UserRole) logs in = to the UserPortal.<o:p></o:p>The user has = permission to use only this VM, so after login the console is = automatically opened for that VM.<o:p></o:p>Problem is that it doesn't login on the VM system with = the provided credentials. Manual login at the console works without any = issues. <o:p></o:p>HBAC-rule check on IPA shows = access is granted. Client has SELINUX in permissive mode and a disabled = firewalld. <o:p></o:p><o:p> </o:p>On the client side I do see some PAM related errors in = the logs (see details below). Extensive Google search on error 17 = "Failure setting user credentials" didn't show helpful = information :-(<o:p></o:p><o:p> </o:p>AFAIK this = is did a pretty standard set-up, all working with RH-family products. I = would expect others to encounter this issue as well. <o:p></o:p>If someone knows any solution or has some directions = to fix this it would be greatly appreciated.<o:p></o:p><o:p> </o:p>Thanks,<o:p></o:p><o:p> </o:p>Paul<o:p></o:p><o:p> </o:p>------------------------------------------------------<= o:p></o:p>System setup: I have 3 systems = <o:p></o:p><o:p> </o:p>The connection between the Engine and IPA is working = fine. (I can log in with IPA users etc.) Connection is made according to = this document: = https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Virtuali= zation/3.6/html-single/Administration_Guide/index.html#sect-Configuring_a= n_External_LDAP_Provider<o:p></o:p><o:p> </o:p>Configuration of the client is done according to this = document: = https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Virtuali= zation/3.6/html/Virtual_Machine_Management_Guide/chap-Additional_Configur= ation.html#sect-Configuring_Single_Sign-On_for_Virtual_Machines<o:p></o:p= ><o:p> </o:p>--- = Hosted Engine:<o:p></o:p>[root@engine ~]# cat = /etc/redhat-release<o:p></o:p>CentOS Linux = release 7.2.1511 (Core)<o:p></o:p>[root@engine = ~]# uname -a<o:p></o:p>Linux engine.DOMAIN.COM = 3.10.0-327.10.1.el7.x86_64 #1 SMP Tue Feb 16 17:03:50 UTC 2016 x86_64 = x86_64 x86_64 GNU/Linux<o:p></o:p>[root@engine = ~]# rpm -qa | grep ovirt<o:p></o:p>ovirt-vmconsole-1.0.0-1.el7.centos.noarch<o:p></o:p></p= >ovirt-engine-restapi-3.6.2.6-1.el7.centos.noarch<o:p></= o:p>ovirt-setup-lib-1.0.1-1.el7.centos.noarch<o:p></o:p></p= >ovirt-engine-setup-plugin-ovirt-engine-common-3.6.3.4-1= .el7.centos.noarch<o:p></o:p>ovirt-engine-setup-3.6.3.4-1.el7.centos.noarch<o:p></o:= p>ovirt-image-uploader-3.6.0-1.el7.centos.noarch<o:p></o:= p>ovirt-engine-extension-aaa-jdbc-1.0.5-1.el7.noarch<o:p>= </o:p>ovirt-host-deploy-1.4.1-1.el7.centos.noarch<o:p></o:p><= /p>ovirt-engine-extension-aaa-ldap-setup-1.1.2-1.el7.cento= s.noarch<o:p></o:p>ovirt-engine-wildfly-overlay-8.0.4-1.el7.noarch<o:p></o= :p>ovirt-engine-wildfly-8.2.1-1.el7.x86_64<o:p></o:p><= p = class=3DMsoNormal>ovirt-vmconsole-proxy-1.0.0-1.el7.centos.noarch<o:p></o= :p>ovirt-engine-tools-3.6.2.6-1.el7.centos.noarch<o:p></o:= p>ovirt-engine-dbscripts-3.6.2.6-1.el7.centos.noarch<o:p>= </o:p>ovirt-engine-backend-3.6.2.6-1.el7.centos.noarch<o:p></= o:p>ovirt-engine-3.6.2.6-1.el7.centos.noarch<o:p></o:p>= ovirt-engine-extension-aaa-ldap-1.1.2-1.el7.centos.noar= ch<o:p></o:p>ovirt-engine-setup-base-3.6.3.4-1.el7.centos.noarch<o:p= ></o:p>ovirt-engine-setup-plugin-ovirt-engine-3.6.3.4-1.el7.ce= ntos.noarch<o:p></o:p>ovirt-engine-setup-plugin-websocket-proxy-3.6.3.4-1.el7= .centos.noarch<o:p></o:p>ovirt-engine-vmconsole-proxy-helper-3.6.3.4-1.el7.cento= s.noarch<o:p></o:p>ovirt-engine-cli-3.6.2.0-1.el7.centos.noarch<o:p></o:p>= ovirt-host-deploy-java-1.4.1-1.el7.centos.noarch<o:p></= o:p>ovirt-engine-userportal-3.6.2.6-1.el7.centos.noarch<o:p= ></o:p>ovirt-engine-webadmin-portal-3.6.2.6-1.el7.centos.noarc= h<o:p></o:p>ovirt-guest-agent-common-1.0.11-1.el7.noarch<o:p></o:p>= ovirt-release36-003-1.noarch<o:p></o:p>ovirt-iso-uploader-3.6.0-1.el7.centos.noarch<o:p></o:p>= ovirt-engine-lib-3.6.3.4-1.el7.centos.noarch<o:p></o:p>= ovirt-engine-sdk-python-3.6.3.0-1.el7.centos.noarch<o:p= ></o:p>ovirt-engine-setup-plugin-vmconsole-proxy-helper-3.6.3.= 4-1.el7.centos.noarch<o:p></o:p>ovirt-engine-websocket-proxy-3.6.3.4-1.el7.centos.noarc= h<o:p></o:p>ovirt-log-collector-3.6.1-1.el7.centos.noarch<o:p></o:p= >ovirt-engine-extensions-api-impl-3.6.3.4-1.el7.centos.n= oarch<o:p></o:p><o:p> </o:p>--- FreeIPA:<o:p></o:p>[root@ipa01 ~]# cat = /etc/redhat-release<o:p></o:p>CentOS Linux = release 7.2.1511 (Core) <o:p></o:p>[root@ipa01 = ~]#  uname -a<o:p></o:p>Linux = ipa01.DOMAIN.COM 3.10.0-327.10.1.el7.x86_64 #1 SMP Tue Feb 16 17:03:50 = UTC 2016 x86_64 x86_64 x86_64 GNU/Linux<o:p></o:p>[root@ipa01 ~]# rpm -qa | grep ipa<o:p></o:p>ipa-python-4.2.0-15.el7_2.6.x86_64<o:p></o:p>ipa-client-4.2.0-15.el7_2.6.x86_64<o:p></o:p>python-libipa_hbac-1.13.0-40.el7_2.1.x86_64<o:p></o:p><= /p>python-iniparse-0.4-9.el7.noarch<o:p></o:p>libipa_hbac-1.13.0-40.el7_2.1.x86_64<o:p></o:p>sssd-ipa-1.13.0-40.el7_2.1.x86_64<o:p></o:p>ipa-admintools-4.2.0-15.el7_2.6.x86_64<o:p></o:p><p= class=3DMsoNormal>ipa-server-4.2.0-15.el7_2.6.x86_64<o:p></o:p>ipa-server-dns-4.2.0-15.el7_2.6.x86_64<o:p></o:p><p= class=3DMsoNormal><o:p> </o:p>--- = Client:<o:p></o:p>[root@test06 ~]# cat = /etc/redhat-release<o:p></o:p>CentOS Linux = release 7.2.1511 (Core) <o:p></o:p>[root@test06 = ~]# uname -a<o:p></o:p>Linux test06.DOMAIN.COM = 3.10.0-327.10.1.el7.x86_64 #1 SMP Tue Feb 16 17:03:50 UTC 2016 x86_64 = x86_64 x86_64 GNU/Linux<o:p></o:p>[root@test06 = ~]# rpm -qa | grep ipa<o:p></o:p>python-libipa_hbac-1.13.0-40.el7_2.1.x86_64<o:p></o:p><= /p>python-iniparse-0.4-9.el7.noarch<o:p></o:p>sssd-ipa-1.13.0-40.el7_2.1.x86_64<o:p></o:p>ipa-client-4.2.0-15.0.1.el7.centos.6.x86_64<o:p></o:p><= /p>libipa_hbac-1.13.0-40.el7_2.1.x86_64<o:p></o:p>ipa-python-4.2.0-15.0.1.el7.centos.6.x86_64<o:p></o:p><= /p>device-mapper-multipath-0.4.9-85.el7.x86_64<o:p></o:p><= /p>device-mapper-multipath-libs-0.4.9-85.el7.x86_64<o:p></= o:p>[root@test06 ~]# rpm -qa | grep = guest-agent<o:p></o:p>qemu-guest-agent-2.3.0-4.el7.x86_64<o:p></o:p>ovirt-guest-agent-pam-module-1.0.11-1.el7.x86_64<o:p></= o:p>ovirt-guest-agent-gdm-plugin-1.0.11-1.el7.noarch<o:p></= o:p>ovirt-guest-agent-common-1.0.11-1.el7.noarch<o:p></o:p>= <o:p> </o:p>---------------------------------------------------<o:p= ></o:p>Relevant logs:<o:p></o:p>--- Engine:<o:p></o:p>//var/log/ovirt-engine/engine<o:p></o:p>2016-03-17 15:22:10,516 INFO  = [org.ovirt.engine.core.bll.aaa.LoginUserCommand] (default task-22) [] = Running command: LoginUserCommand internal: false.<o:p></o:p>2016-03-17 15:22:10,568 INFO  = [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] = (default task-22) [] Correlation ID: null, Call Stack: null, Custom = Event ID: -1, Message: User test6@DOMAIN logged in.<o:p></o:p>2016-03-17 15:22:13,795 WARN  = [org.ovirt.engine.core.dal.job.ExecutionMessageDirector] (default = task-6) [7400ae46] The message key 'VmLogon' is missing from = 'bundles/ExecutionMessages'<o:p></o:p>2016-03-17 15:22:13,839 INFO  = [org.ovirt.engine.core.bll.VmLogonCommand] (default task-6) [7400ae46] = Running command: VmLogonCommand internal: false. Entities affected = :  ID: 64a84b40-6050-4a96-a59d-d557a317c38c Type: VMAction group = CONNECT_TO_VM with role type USER<o:p></o:p>2016-03-17 15:22:13,842 INFO  = [org.ovirt.engine.core.vdsbroker.vdsbroker.VmLogonVDSCommand] (default = task-6) [7400ae46] START, VmLogonVDSCommand(HostName =3D host01, = VmLogonVDSCommandParameters:{runAsync=3D'true', = hostId=3D'225157c0-224b-4aa6-9210-db4de7c7fc30', = vmId=3D'64a84b40-6050-4a96-a59d-d557a317c38c', domain=3D'DOMAIN-authz', = password=3D'***', userName=3D'test6@DOMAIN'}), log id: = 2015a1e0<o:p></o:p>2016-03-17 15:22:14,848 = INFO  [org.ovirt.engine.core.vdsbroker.vdsbroker.VmLogonVDSCommand] = (default task-6) [7400ae46] FINISH, VmLogonVDSCommand, log id: = 2015a1e0<o:p></o:p>2016-03-17 15:22:15,317 = INFO  [org.ovirt.engine.core.bll.SetVmTicketCommand] (default = task-18) [10dad788] Running command: SetVmTicketCommand internal: true. = Entities affected :  ID: 64a84b40-6050-4a96-a59d-d557a317c38c Type: = VMAction group CONNECT_TO_VM with role type USER<o:p></o:p>2016-03-17 15:22:15,322 INFO  = [org.ovirt.engine.core.vdsbroker.vdsbroker.SetVmTicketVDSCommand] = (default task-18) [10dad788] START, SetVmTicketVDSCommand(HostName =3D = host01, SetVmTicketVDSCommandParameters:{runAsync=3D'true', = hostId=3D'225157c0-224b-4aa6-9210-db4de7c7fc30', = vmId=3D'64a84b40-6050-4a96-a59d-d557a317c38c', protocol=3D'SPICE', = ticket=3D'rd8avqvdBnRl', validTime=3D'120', userName=3D'test6', = userId=3D'10b2da3e-6401-4a09-a330-c0780bc0faef', = disconnectAction=3D'LOCK_SCREEN'}), log id: 72efb73b<o:p></o:p>2016-03-17 15:22:16,340 INFO  = [org.ovirt.engine.core.vdsbroker.vdsbroker.SetVmTicketVDSCommand] = (default task-18) [10dad788] FINISH, SetVmTicketVDSCommand, log id: = 72efb73b<o:p></o:p>2016-03-17 15:22:16,377 = INFO  = [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] = (default task-18) [10dad788] Correlation ID: 10dad788, Call Stack: null, = Custom Event ID: -1, Message: User test6@DOMAIN initiated console = session for VM test06<o:p></o:p>2016-03-17 = 15:22:19,418 INFO  = [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] = (DefaultQuartzScheduler_Worker-53) [] Correlation ID: null, Call Stack: = null, Custom Event ID: -1, Message: User test6@DOMAIN-authz is connected = to VM test06.<o:p></o:p><o:p> </o:p>--- Client:<o:p></o:p>/var/log/ovirt-guest-agent/ovirt-guest-agent.log<o:p></= o:p>MainThread::INFO::2016-03-17 = 15:20:58,145::ovirt-guest-agent::57::root::Starting oVirt guest = agent<o:p></o:p>CredServer::INFO::2016-03-17 = 15:20:58,214::CredServer::257::root::CredServer is = running...<o:p></o:p>Dummy-1::INFO::2016-03-17 = 15:20:58,216::OVirtAgentLogic::294::root::Received an external command: = lock-screen...<o:p></o:p>Dummy-1::INFO::2016-03-17 = 15:22:13,104::OVirtAgentLogic::294::root::Received an external command: = login...<o:p></o:p>Dummy-1::INFO::2016-03-17 = 15:22:13,104::CredServer::207::root::The following users are allowed to = connect: [0]<o:p></o:p>Dummy-1::INFO::2016-03-17 = 15:22:13,104::CredServer::273::root::Opening credentials = channel...<o:p></o:p>Dummy-1::INFO::2016-03-17 = 15:22:13,105::CredServer::132::root::Emitting user authenticated signal = (651416).<o:p></o:p>CredChannel::INFO::2016-03-17 = 15:22:13,188::CredServer::225::root::Incomming connection from user: 0 = process: 2570<o:p></o:p>CredChannel::INFO::2016-03-17 = 15:22:13,188::CredServer::232::root::Sending user's credential (token: = 651416)<o:p></o:p>Dummy-1::INFO::2016-03-17 = 15:22:13,189::CredServer::277::root::Credentials channel was = closed.<o:p></o:p><o:p> </o:p>/var/log/secure<o:p></o:p>Mar = 17 15:21:07 test06 gdm-launch-environment]: = pam_unix(gdm-launch-environment:session): session opened for user gdm by = (uid=3D0)<o:p></o:p>Mar 17 15:21:10 test06 = polkitd[749]: Registered Authentication Agent for unix-session:c1 = (system bus name :1.34 [gnome-shell --mode=3Dgdm], object path = /org/freedesktop/PolicyKit1/AuthenticationAgent, locale = en_US.UTF-8)<o:p></o:p>Mar 17 15:22:13 test06 = gdm-ovirtcred]: pam_sss(gdm-ovirtcred:auth): authentication failure; = logname=3D uid=3D0 euid=3D0 tty=3D ruser=3D rhost=3D = user=3Dtest6<o:p></o:p>Mar 17 15:22:13 test06 gdm-ovirtcred]: = pam_sss(gdm-ovirtcred:auth): received for user test6: 17 (Failure = setting user credentials)<o:p></o:p><o:p> </o:p>/var/log/sssd/krb5_child.log (debug-level = 10)<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [[sssd[krb5_child[2575]]]] [get_and_save_tgt] (0x0020): 1234: = [-1765328360][Preauthentication failed]<o:p></o:p>(Thu Mar 17 15:22:13 = 2016) [[sssd[krb5_child[2575]]]] [map_krb5_error] (0x0020): 1303: = [-1765328360][Preauthentication failed]<o:p></o:p>(Thu Mar 17 15:22:13 = 2016) [[sssd[krb5_child[2575]]]] [k5c_send_data] (0x0200): Received = error code 1432158215<o:p></o:p>(Thu = Mar 17 15:22:13 2016) [[sssd[krb5_child[2575]]]] [pack_response_packet] = (0x2000): response packet size: [4]<o:p></o:p>(Thu Mar 17 15:22:13 2016) [[sssd[krb5_child[2575]]]] = [k5c_send_data] (0x4000): Response sent.<o:p></o:p>(Thu Mar 17 15:22:13 2016) [[sssd[krb5_child[2575]]]] = [main] (0x0400): krb5_child completed successfully<o:p></o:p><o:p> </o:p>/var/log/sssd/sssd_DOMAIN.COM.log (debug-level = 10)<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [be_pam_handler] (0x0100): Got request with the = following data<o:p></o:p>(Thu Mar 17 15:22:13 = 2016) [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): command: = PAM_AUTHENTICATE<o:p></o:p>(Thu Mar 17 15:22:13 = 2016) [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): domain: = DOMAIN.COM<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): user: = test6<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): service: = gdm-ovirtcred<o:p></o:p>(Thu Mar 17 15:22:13 = 2016) [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): = tty:<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): = ruser:<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): = rhost:<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): authtok type: = 1<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): newauthtok type: = 0<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): priv: = 1<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): cli_pid: = 2570<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [pam_print_data] (0x0100): logon name: not = set<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [krb5_auth_queue_send] (0x1000): Wait queue of = user [test6] is empty, running request [0x7fe30df03cc0] = immediately.<o:p></o:p>(Thu Mar 17 15:22:13 = 2016) [sssd[be[DOMAIN.COM]]] [krb5_setup] (0x4000): No mapping for: = test6<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [ldb] (0x4000): Added timed event = "ltdb_callback": 0x7fe30df07120<o:p></o:p><o:p> </o:p>(Thu Mar 17 = 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [ldb] (0x4000): Added timed event = "ltdb_timeout": 0x7fe30df16590<o:p></o:p><o:p> </o:p>(Thu Mar 17 = 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [ldb] (0x4000): Running timer = event 0x7fe30df07120 "ltdb_callback"<o:p></o:p><o:p> </o:p>(Thu Mar 17 = 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [ldb] (0x4000): Destroying timer = event 0x7fe30df16590 "ltdb_timeout"<o:p></o:p><o:p> </o:p>(Thu Mar 17 = 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [ldb] (0x4000): Ending timer event = 0x7fe30df07120 "ltdb_callback"<o:p></o:p><o:p> </o:p>(Thu Mar 17 = 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [fo_resolve_service_send] = (0x0100): Trying to resolve service 'IPA'<o:p></o:p>(Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] = [get_server_status] (0x1000): Status of server 'ipa01.DOMAIN.COM' is = 'working'<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [get_port_status] (0x1000): Port status of port = 389 for server 'ipa01.DOMAIN.COM' is 'working'<o:p></o:p>(Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] = [fo_resolve_service_activate_timeout] (0x2000): Resolve timeout set to 6 = seconds<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [resolve_srv_send] (0x0200): The status of SRV = lookup is resolved<o:p></o:p>(Thu Mar 17 = 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [get_server_status] (0x1000): = Status of server 'ipa01.DOMAIN.COM' is 'working'<o:p></o:p>(Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] = [be_resolve_server_process] (0x1000): Saving the first resolved = server<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [be_resolve_server_process] (0x0200): Found = address for server ipa01.DOMAIN.COM: [10.0.1.21] TTL = 1200<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [ipa_resolve_callback] (0x0400): Constructed uri = 'ldap://ipa01.DOMAIN.COM'<o:p></o:p>(Thu Mar 17 = 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sss_krb5_realm_has_proxy] = (0x0040): profile_get_values failed.<o:p></o:p>(Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] = [child_handler_setup] (0x2000): Setting up signal handler up for pid = [2575]<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [child_handler_setup] (0x2000): Signal handler = set up for pid [2575]<o:p></o:p>(Thu Mar 17 = 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [write_pipe_handler] (0x0400): All = data has been sent!<o:p></o:p>(Thu Mar 17 = 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [child_sig_handler] (0x1000): = Waiting for child [2575].<o:p></o:p><o:p> </o:p>(Thu Mar 17 = 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [child_sig_handler] (0x0100): = child [2575] finished successfully.<o:p></o:p>(Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] = [read_pipe_handler] (0x0400): EOF received, client = finished<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [check_wait_queue] (0x1000): Wait queue for user = [test6] is empty.<o:p></o:p>(Thu Mar 17 = 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [krb5_auth_queue_done] (0x1000): = krb5_auth_queue request [0x7fe30df03cc0] done.<o:p></o:p>(Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] = [sdap_id_op_connect_step] (0x4000): reusing cached = connection<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [sdap_print_server] (0x2000): Searching = 10.0.1.21<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [sdap_get_generic_ext_step] (0x0400): calling = ldap_search_ext with = [(&(cn=3DipaConfig)(objectClass=3DipaGuiConfig))][cn=3Detc,dc=3DDOMAI= N,dc=3Dcom].<o:p></o:p>(Thu Mar 17 15:22:13 = 2016) [sssd[be[DOMAIN.COM]]] [sdap_get_generic_ext_step] (0x1000): = Requesting attrs: [ipaMigrationEnabled]<o:p></o:p>(Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] = [sdap_get_generic_ext_step] (0x1000): Requesting attrs: = [ipaSELinuxUserMapDefault]<o:p></o:p>(Thu Mar = 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_get_generic_ext_step] = (0x1000): Requesting attrs: [ipaSELinuxUserMapOrder]<o:p></o:p>(Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] = [sdap_get_generic_ext_step] (0x2000): ldap_search_ext called, msgid =3D = 122<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [sdap_op_add] (0x2000): New operation 122 timeout = 60<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [sdap_process_result] (0x2000): Trace: = sh[0x7fe30deef090], connected[1], ops[0x7fe30df094a0], = ldap[0x7fe30def2920]<o:p></o:p>(Thu Mar 17 = 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_process_message] (0x4000): = Message type: [LDAP_RES_SEARCH_ENTRY]<o:p></o:p>(Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] = [sdap_parse_entry] (0x1000): OriginalDN: = [cn=3DipaConfig,cn=3Detc,dc=3DDOMAIN,dc=3Dcom].<o:p></o:p>(Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] = [sdap_parse_range] (0x2000): No sub-attributes for = [ipaMigrationEnabled]<o:p></o:p>(Thu Mar 17 = 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_parse_range] (0x2000): No = sub-attributes for [ipaSELinuxUserMapDefault]<o:p></o:p>(Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] = [sdap_parse_range] (0x2000): No sub-attributes for = [ipaSELinuxUserMapOrder]<o:p></o:p>(Thu Mar 17 = 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_process_result] (0x2000): = Trace: sh[0x7fe30deef090], connected[1], ops[0x7fe30df094a0], = ldap[0x7fe30def2920]<o:p></o:p>(Thu Mar 17 = 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [sdap_process_message] (0x4000): = Message type: [LDAP_RES_SEARCH_RESULT]<o:p></o:p>(Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] = [sdap_get_generic_op_finished] (0x0400): Search result: Success(0), no = errmsg set<o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [sdap_op_destructor] (0x2000): Operation 122 = finished <o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [sdap_id_op_destroy] (0x4000): releasing = operation connection <o:p></o:p>(Thu Mar 17 = 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [ipa_get_migration_flag_done] = (0x0100): Password migration is not enabled. <o:p></o:p>(Thu Mar 17 15:22:13 = 2016) [sssd[be[DOMAIN.COM]]] [be_pam_handler_callback] (0x0100): Backend = returned: (0, 17, <NULL>) [Success (Failure setting user = credentials)] <o:p></o:p>(Thu Mar 17 = 15:22:13 2016) [sssd[be[DOMAIN.COM]]] [be_pam_handler_callback] = (0x0100): Sending result [17][DOMAIN.COM] <o:p></o:p>(Thu Mar 17 15:22:13 2016) [sssd[be[DOMAIN.COM]]] = [be_pam_handler_callback] (0x0100): Sent result [17][DOMAIN.COM] = <o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [sdap_process_result] (0x2000): Trace: = sh[0x7fe30deef090], connected[1], ops[(nil)], ldap[0x7fe30def2920] = <o:p></o:p>(Thu Mar 17 15:22:13 2016) = [sssd[be[DOMAIN.COM]]] [sdap_process_result] (0x2000): Trace: = ldap_result found nothing!<o:p></o:p><o:p> </o:p> = <o:p></o:p><o:p> </o:p><o:p> </o:p><o:p> </o:p><o:p> </o:p><o:p> </o:p><o:p> </o:p><o:p> </o:p></div></body></html> ------=_NextPart_000_0050_01D18069.35C995E0--

2 5