April 2017 - Users - oVirt List Archives

Network Address Change
by Paul.LKW 28 Dec '22

28 Dec '22

Hi All: I just has a case, I need to change the oVirt host and engine IP address due to data center decommission I checked in the hosted-engine host there are some files I could change ; in ovirt-hosted-engine/hosted-engine.conf ca_subject="O=simple.com, CN=1.2.3.4" gateway=1.2.3.254 and of course I need to change the ovirtmgmt interface IP too, I think just change the above line could do the tick, but where could I change the other host IP in the cluster ? I think I have to be lost all the host as once changed the hosted-engine host IP as it is in diff. sub net. Does there any command line tools could do that or someone has such experience could share? Best Regards, Paul.LKW

4 6

looking for some ISV backup software which integrates the backup API
by Nathanaël Blanchet 08 Jun '22

08 Jun '22

Hello, We are about to change our backup provider, and I find it is a great chance to choose a full supported ovirt backup solution. I currently use this python script vm-backup-scheduler (https://github.com/wefixit-AT/oVirtBackup) but it is not the workflow officially suggested by the community (https://www.ovirt.org/develop/release-management/features/storage/backup-re…) I've been looking for a long time an ISV who supports such an API, but the only one I found is this one : Acronis Backup Advanced suggested here https://access.redhat.com/ecosystem/search/#/ecosystem/Red%20Hat%20Enterpri… I ran the trial version, but it doesn't seem to do better than the vm-backup-scheduler script, and it doesn't seem to use the backup API (attach a clone as a disk to an existing vm). Can you suggest me some other ISV solutions, if they ever exist... or share me your backup experience?

5 4

OVS switch type for hosted-engine
by Devin A. Bougie 06 May '22

06 May '22

Is it possible to setup a hosted engine using the OVS switch type instead of Legacy? If it's not possible to start out as OVS, instructions for switching from Legacy to OVS after the fact would be greatly appreciated. Many thanks, Devin

4 5

OVN routing and firewalling in oVirt
by Gianluca Cecchi 19 Apr '22

19 Apr '22

Hello, how do we manage routing between different OVN networks in oVirt? And between OVN networks and physical ones? Based on architecture read here: http://openvswitch.org/support/dist-docs/ovn-architecture.7.html I see terms for logical routers and gateway routers respectively but how to apply to oVirt configuration? Do I have to choose between setting up a specialized VM or a physical one: is it applicable/advisable to put on oVirt host itself the gateway functionality? Is there any security policy (like security groups in Openstack) to implement? Thanks, Gianluca

4 6

Vm suddenly paused with error "vm has paused due to unknown storage error"
by Jasper Siero 18 Feb '20

18 Feb '20

Hi all, Since we upgraded our Ovirt nodes to CentOS 7 a vm (not a specific one but never more then one) will sometimes pause suddenly with the error "VM ... has paused due to unknown storage error". It happens now two times in a month. The Ovirt node uses san storage for the vm's running on it. When a specific vm is pausing with an error the other vm's keeps running without problems. The vm runs without problems after unpausing it. Versions: CentOS Linux release 7.1.1503 vdsm-4.14.17-0 libvirt-daemon-1.2.8-16 vdsm.log: VM Channels Listener::DEBUG::2015-10-25 07:43:54,382::vmChannels::95::vds::(_handle_timeouts) Timeout on fileno 78. libvirtEventLoop::INFO::2015-10-25 07:43:56,177::vm::4602::vm.Vm::(_onIOError) vmId=`77f07ae0-cc3e-4ae2-90ec-7fba7b11deeb`::abnormal vm stop device virtio-disk0 error eother libvirtEventLoop::DEBUG::2015-10-25 07:43:56,178::vm::5204::vm.Vm::(_onLibvirtLifecycleEvent) vmId=`77f07ae0-cc3e-4ae2-90ec-7fba7b11deeb`::event Suspended detail 2 opaque None libvirtEventLoop::INFO::2015-10-25 07:43:56,178::vm::4602::vm.Vm::(_onIOError) vmId=`77f07ae0-cc3e-4ae2-90ec-7fba7b11deeb`::abnormal vm stop device virtio-disk0 error eother ........... libvirtEventLoop::INFO::2015-10-25 07:43:56,180::vm::4602::vm.Vm::(_onIOError) vmId=`77f07ae0-cc3e-4ae2-90ec-7fba7b11deeb`::abnormal vm stop device virtio-disk0 error eother specific error part in libvirt vm log: block I/O error in device 'drive-virtio-disk0': Unknown error 32758 (32758) ........... block I/O error in device 'drive-virtio-disk0': Unknown error 32758 (32758) engine.log: 2015-10-25 07:44:48,945 INFO [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] (DefaultQuartzScheduler_Worker-40) [a43dcc8] VM diataal-prod-cas1 77f07ae0-cc3e-4ae2-90ec-7fba7b11deeb moved from Up --> Paused 2015-10-25 07:44:49,003 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler_Worker-40) [a43dcc8] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: VM diataal-prod-cas1 has paused due to unknown storage error. Has anyone experienced the same problem or knows a way to solve this? Kind regards, Jasper

3 3

Unable to find OVF_STORE after recovery / upgrade
by Sam Cappello 26 May '19

26 May '19

This is a multi-part message in MIME format. --------------05F3D0780062C6D37C1619A7 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 7bit Hi, so i was running a 3.4 hosted engine two node setup on centos 6, had some disk issues so i tried to upgrade to centos 7 and follow the path 3.4 > 3.5 > 3.6 > 4.0. i screwed up dig time somewhere between 3.6 and 4.0, so i wiped the drives, installed a fresh 4.0.3, then created the database and restored the 3.6 engine backup before running engine-setup as per the docs. things seemed to work, but i have the the following issues / symptoms: - ovirt-ha-agent running 100% CPU on both nodes - messages in the UI that the Hosted Engine storage Domain isn't active and Failed to import the Hosted Engine Storage Domain - hosted engine is not visible in the UI and the following repeating in the agent.log: MainThread::INFO::2016-10-03 12:38:27,718::hosted_engine::461::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(start_monitoring) Current state EngineUp (score: 3400) MainThread::INFO::2016-10-03 12:38:27,720::hosted_engine::466::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(start_monitoring) Best remote host vmhost1.oracool.net (id: 1, score: 3400) MainThread::INFO::2016-10-03 12:38:37,979::states::421::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(consume) Engine vm running on localhost MainThread::INFO::2016-10-03 12:38:37,985::hosted_engine::612::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_vdsm) Initializing VDSM MainThread::INFO::2016-10-03 12:38:45,645::hosted_engine::639::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images) Connecting the storage MainThread::INFO::2016-10-03 12:38:45,647::storage_server::219::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server) Connecting storage server MainThread::INFO::2016-10-03 12:39:00,543::storage_server::226::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server) Connecting storage server MainThread::INFO::2016-10-03 12:39:00,562::storage_server::233::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server) Refreshing the storage domain MainThread::INFO::2016-10-03 12:39:01,235::hosted_engine::666::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images) Preparing images MainThread::INFO::2016-10-03 12:39:01,236::image::126::ovirt_hosted_engine_ha.lib.image.Image::(prepare_images) Preparing images MainThread::INFO::2016-10-03 12:39:09,295::hosted_engine::669::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images) Reloading vm.conf from the shared storage domain MainThread::INFO::2016-10-03 12:39:09,296::config::206::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine.config::(refresh_local_conf_file) Trying to get a fresher copy of vm configuration from the OVF_STORE MainThread::WARNING::2016-10-03 12:39:16,928::ovf_store::107::ovirt_hosted_engine_ha.lib.ovf.ovf_store.OVFStore::(scan) Unable to find OVF_STORE MainThread::ERROR::2016-10-03 12:39:16,934::config::235::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine.config::(refresh_local_conf_file) Unable to get vm.conf from OVF_STORE, falling back to initial vm.conf I have searched a bit and not really found a solution, and have come to the conclusion that i have made a mess of things, and am wondering if the best solution is to export the VMs, and reinstall everything then import them back? i am using remote NFS storage. if i try and add the hosted engine storage domain it says it is already registered. i have also upgraded and am now running oVirt Engine Version: 4.0.4.4-1.el7.centos hosts were installed using ovirt-node. currently at 3.10.0-327.28.3.el7.x86_64 if a fresh install is best, any advice / pointer to doc that explains best way to do this? i have not moved my most important server over to this cluster yet so i can take some downtime to reinstall. thanks! sam --------------05F3D0780062C6D37C1619A7 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: 8bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=utf-8"> </head> <body bgcolor="#FFFFFF" text="#000000"> Hi,<br> so i was running a 3.4 hosted engine two node setup on centos 6, had some disk issues so i tried to upgrade to centos 7 and follow the path 3.4 > 3.5 > 3.6 > 4.0. i screwed up dig time somewhere between 3.6 and 4.0, so i wiped the drives, installed a fresh 4.0.3, then created the database and restored the 3.6 engine backup before running engine-setup as per the docs. things seemed to work, but i have the the following issues / symptoms:<br> - ovirt-ha-agent running 100% CPU on both nodes<br> - messages in the UI that the Hosted Engine storage Domain isn't active and Failed to import the Hosted Engine Storage Domain<br> - hosted engine is not visible in the UI<br> and the following repeating in the agent.log:<br> <br> MainThread::INFO::2016-10-03 12:38:27,718::hosted_engine::461::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(start_monitoring) Current state EngineUp (score: 3400)<br> MainThread::INFO::2016-10-03 12:38:27,720::hosted_engine::466::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(start_monitoring) Best remote host vmhost1.oracool.net (id: 1, score: 3400)<br> MainThread::INFO::2016-10-03 12:38:37,979::states::421::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(consume) Engine vm running on localhost<br> MainThread::INFO::2016-10-03 12:38:37,985::hosted_engine::612::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_vdsm) Initializing VDSM<br> MainThread::INFO::2016-10-03 12:38:45,645::hosted_engine::639::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images) Connecting the storage<br> MainThread::INFO::2016-10-03 12:38:45,647::storage_server::219::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server) Connecting storage server<br> MainThread::INFO::2016-10-03 12:39:00,543::storage_server::226::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server) Connecting storage server<br> MainThread::INFO::2016-10-03 12:39:00,562::storage_server::233::ovirt_hosted_engine_ha.lib.storage_server.StorageServer::(connect_storage_server) Refreshing the storage domain<br> MainThread::INFO::2016-10-03 12:39:01,235::hosted_engine::666::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images) Preparing images<br> MainThread::INFO::2016-10-03 12:39:01,236::image::126::ovirt_hosted_engine_ha.lib.image.Image::(prepare_images) Preparing images<br> MainThread::INFO::2016-10-03 12:39:09,295::hosted_engine::669::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine::(_initialize_storage_images) Reloading vm.conf from the shared storage domain<br> MainThread::INFO::2016-10-03 12:39:09,296::config::206::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine.config::(refresh_local_conf_file) Trying to get a fresher copy of vm configuration from the OVF_STORE<br> MainThread::WARNING::2016-10-03 12:39:16,928::ovf_store::107::ovirt_hosted_engine_ha.lib.ovf.ovf_store.OVFStore::(scan) Unable to find OVF_STORE<br> MainThread::ERROR::2016-10-03 12:39:16,934::config::235::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine.config::(refresh_local_conf_file) Unable to get vm.conf from OVF_STORE, falling back to initial vm.conf<br> <br> I have searched a bit and not really found a solution, and have come to the conclusion that i have made a mess of things, and am wondering if the best solution is to export the VMs, and reinstall everything then import them back?<br> i am using remote NFS storage.<br> if i try and add the hosted engine storage domain it says it is already registered.<br> i have also upgraded and am now running <span class="gwt-InlineLabel">oVirt Engine Version: 4.0.4.4-1.el7.centos<br> hosts were installed using ovirt-node. currently at 3.10.0-327.28.3.el7.x86_64<br> if a fresh install is best, any advice / pointer to doc that explains best way to do this?<br> i have not moved my most important server over to this cluster yet so i can take some downtime to reinstall.<br> thanks!<br> sam<br> <br> </span><br> </body> </html> --------------05F3D0780062C6D37C1619A7--

3 2

[Users] Problem Creating "oVirtEngine" Machine
by Richie＠HIP 15 May '19

15 May '19

--Apple-Mail=_DF4BF6D1-1F87-4F60-9CF9-070D4D836241 Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset=windows-1252 I can't agree with you more. Modifying every box's or Virtual Machine's = HOSTS file with a FQDN and IP SHOULD work, but in my case it is not. = There are several reasons I've come to believe could be the problem = during my trial-and-errors testing and learning. FIRST - MACHINE IPs. THe machine's "Names" where not appearing in the Microsoft Active = Directory DHCP along with their assigned IPs; in other words, the DHCP = just showed an "Assigned IP", equal to the Linux Machine's IP, with a = <empty> ('i.e. blank, none, silch, plan old "no-letters-or-numbers") = "Name" in the "Name" (i.e. machines "network name", or FQDN-value used = by the Windows AD DNS-service) column. =20 if your IP is is appearing with an <empty> "name", there is no "host = name" to associate the IP, it makes it difficult to define a FQDN; which = isn't that useful if we're going to use the HOSTS files in all = participating machines in an oVirt Installation. I kept banging my head for three (3) long hours trying to find the = problem. In Fedora 18, I could't find where the "network name" of the machine = could be defined. =20 I tried putting the "Additional Search Domains" and/or "DHCP Client ID" = in Fedora's 18 Desktop - under "System Settings > Hardware > Network > = Options > IPv4 Setting" The DHCP went crazy; showing an "Aberrant-MAC-Address" (i.e. a really = long-sting value where the machine's MAC address should be), and we knew = the MAC address as we obtained using "ifconfig" on the machine getting = it's IP from the DHCP. So we reverted these entries from the = aforementioned, rebooted, and got an assigned IP, with proper MAC = address, but still no "Name" Kept wondering around the "Settings" and seeing which one made sense, = but what the heck, I went for it. =20 Under "System Settings > System > Details" I found the information about = GNOME and the machine's hardware. =20 There was a field for "Device Name" that originally had = "localhost.localdomain"; I changed the value to "ovirtmanager". and = under "Graphic" changed to "Forced Fallback Mode" to "ON". =20 I also installed all Kerberos libraries and client (i.e. authconfig-gtk, = authhub, authhub-client, krb5-apple-clents, krb5-auth-dialog, = krb5-workstation, pam-kcoda, pam-krb5, root-net.krb5) and rebooted VOILA=85!!! =20 I don;t know if it was the definition of "Device Name" from = "localhost.localdomain" to "ovirtengine", of the Kerberos libraries = install, or both. But finally the MS AD DHCP was showing the = Addigned-IP, the machine "Name" and the proper MAC-address. Regardless, = setting the machine's "Network Name" under "System Settings > System > = Details > Device Name", with no explanation of what "Device Name" meant = or was used for, was the last place I would have imagined this network = setting could be defined. NOTE - Somebody has to try the two steps I did together, separately. to = see which one is the real problem-solver; for me it is working, and "if = it ain't broke, don't fix it=85" Now that I have the DHCP / IP thing sorted, I have to do the DNS stuff. To this point, I've addressed the DHCP and "Network Name" of the = IP-Lease (required for the DNS to work). This still does't completely = explain why, by modifying the HOSTS file (allowing be to set and IP and = non-DNS FQDN). allows me to install the oVirtEngine "as long as I do not = use default HTTPd service parameters as suggested by the install". By = using the HOST file to "define" FQDNs, AND NOT using the default HTTPd = suggested changes, I'm able to install the oVirtEngine (given that I use = ports 8700 and 8701) to access the "oVirtEngine Welcome Screen", BUT = NONE of the "oVirt Portals" work=85 YET=85!!! More to come during the week Richie Jos=E9 E ("Richie") Piovanetti, MD, MS=20 M: 787-615-4884 | richiepiovanetti(a)healthcareinfopartners.com On Aug 2, 2013, at 3:10 AM, Joop <jvdwege(a)xs4all.nl> wrote: > Hello Ritchie, >=20 >> In a conversation via IRC, someone suggested that I activate = "dnsmask" to overcome what appears to be a DNS problem. I'll try that = other possibility once I get home later today. >>=20 >> In the mean time, what do you mean by "fixing the hostname"=85? I = opened and fixed the HOSTNAMES and changed it from = "localhost-localdomain" to "localhost.localdomain" and that made no = difference. Albeit, after changing I didm;t restart, remove ovirtEngine = ((using "engine-cleanup") and reinstalled via "engine-setup". Is that = what you mean=85? >>=20 >>=20 >>=20 >> In the mean time, the fact that even if I resolve the issue of = oVirtEngine I will not be able to connect to the oVirt Nodes unless I = have DNS resolution, apparently means I should do something with = resolving via DNS in my home LAN (i.e implement some sort of "DNS Cache" = so I can resolve my home computers via DNS inside my LAN). >>=20 >> Any suggestions are MORE THAN WELCOME=85!!! >> =20 >=20 > Having setup ovirt more than I can count right now I share your = feeling that it isn't always clear why things are going wrong, but in = this case I suspect that there is a rather small thing missing. > In short if you setup ovirt-engine, either using virtualbox or on real = hardware, and you give your host a meaningfull name AND you add that = info also in your /etc/hosts file than things SHOULD work, no need for = dnsmasq or even bind. Would make things easier once you start adding = virt hosts to you infrastructure since you will need to duplicate these = actions on each host (add engine name/ip to each host and add each host = to the others and all hosts to engine) >=20 > Just ask if you need more assistance and I will write down a small = howto that should work out of the box else I might have some time to see = if I can get things going. >=20 > Regards, >=20 > Joop >=20 --Apple-Mail=_DF4BF6D1-1F87-4F60-9CF9-070D4D836241 Content-Transfer-Encoding: quoted-printable Content-Type: text/html; charset=windows-1252 <html><head><meta http-equiv=3D"Content-Type" content=3D"text/html = charset=3Dwindows-1252"></head><body style=3D"word-wrap: break-word; = -webkit-nbsp-mode: space; -webkit-line-break: after-white-space; ">I = can't agree with you more.  Modifying every box's or Virtual = Machine's HOSTS file with a FQDN and IP SHOULD work, but in my case it = is not.  There are several reasons I've come to believe could be = the problem during my trial-and-errors testing and = learning.<div><div><br></div><div>FIRST - MACHINE IPs.</div><ul = class=3D"MailOutline"><li>THe machine's "Names" where not appearing in = the <b>Microsoft Active Directory DHCP</b> along with their assigned = IPs; in other words, the DHCP just showed an "Assigned IP", equal to the = Linux Machine's IP, with a <empty> ('i.e. blank, none, silch, plan = old "no-letters-or-numbers") "Name" in the "Name" (i.e. machines = "network name", or FQDN-value used by the Windows AD DNS-service) = column.  </li><li>if your IP is is appearing with an <empty> = "name", there is no "host name" to associate the IP, it makes it = difficult to define a FQDN; which isn't that useful if we're going to = use the HOSTS files in all participating machines in an oVirt = Installation.</li><li>I kept banging my head for three (3) long hours = trying to find the problem.</li><ul><li>In Fedora 18, I could't find = where the "network name" of the machine could be defined. =  </li><li>I tried putting the "Additional Search Domains" and/or = "DHCP Client ID" in Fedora's 18 Desktop - under "System Settings > = Hardware > Network > Options > IPv4 Setting"</li><ul><li>The = DHCP went crazy;  showing an "Aberrant-MAC-Address" (i.e. a really = long-sting value where the machine's MAC address should be), and we knew = the MAC address as we obtained using "ifconfig" on the machine getting = it's IP from the DHCP.  So we reverted these entries from the = aforementioned, rebooted, and got an assigned IP, with proper MAC = address, but still no "Name"</li></ul><li>Kept wondering around the = "Settings" and seeing which one made sense, but what the heck, I went = for it.  </li><ul><li>Under "System Settings > System > = Details" I found the information about GNOME and the machine's hardware. =  </li><li>There was a field for "Device Name" that originally had = "localhost.localdomain"; I changed the value to "ovirtmanager". and = under "Graphic" changed to "Forced Fallback Mode" to "ON". =  </li><li>I also installed all Kerberos libraries and client (i.e. = authconfig-gtk, authhub, authhub-client, krb5-apple-clents, = krb5-auth-dialog, krb5-workstation, pam-kcoda, pam-krb5, root-net.krb5) = and rebooted</li><li>VOILA=85!!!  </li></ul><li>I don;t know if it = was the definition of "Device Name" from "localhost.localdomain" to = "ovirtengine", of the Kerberos libraries install, or both.  But = finally the MS AD DHCP was showing the Addigned-IP, the machine "Name" = and the proper MAC-address.  Regardless, setting the machine's = "Network Name" under "System Settings > System > Details = > Device Name", with no explanation of what "Device Name" meant = or was used for, was the last place I would have imagined this = network setting could be defined.</li><li><b>NOTE</b> - Somebody has to = try the two steps I did together, separately. to see which one is the = real problem-solver; for me it is working, and "if it ain't broke, don't = fix it=85"</li></ul></ul><div><br = class=3D"webkit-block-placeholder"></div><div>Now that I have the DHCP / = IP thing sorted, I have to do the DNS stuff.</div><div><br></div><div>To = this point, I've addressed the DHCP and "Network Name" of the IP-Lease = (required for the DNS to work).  This still does't completely = explain why, by modifying the HOSTS file (allowing be to set and IP and = non-DNS FQDN). allows me to install the oVirtEngine "<b><i>as long as I = do not use default  HTTPd service parameters as suggested by the = install</i></b>".  <b>By using the HOST file to "define" FQDNs, AND = NOT using the default HTTPd suggested changes, I'm able to install the = oVirtEngine (given that I use ports 8700 and 8701) to access the = "oVirtEngine Welcome Screen", BUT NONE of the "oVirt Portals" work</b>=85 = YET=85!!!</div><div><br></div><div>More to come during the = week</div><div><br></div><div>Richie</div><div = apple-content-edited=3D"true"><br>Jos=E9 E ("Richie") Piovanetti, MD, = MS <br>M: 787-615-4884 | <a = href=3D"mailto:richiepiovanetti@healthcareinfopartners.com">richiepiovanet= ti(a)healthcareinfopartners.com</a><br><br><br><br><br><br></div><br><div><d= iv>On Aug 2, 2013, at 3:10 AM, Joop <<a = href=3D"mailto:jvdwege@xs4all.nl">jvdwege(a)xs4all.nl</a>> = wrote:</div><br class=3D"Apple-interchange-newline"><blockquote = type=3D"cite">Hello Ritchie,<br><br><blockquote type=3D"cite">In a = conversation via IRC, someone suggested that I activate "dnsmask" to = overcome what appears to be a DNS problem.  I'll try that other = possibility once I get home later today.<br><br>In the mean time, what = do you mean by "fixing the hostname"=85?  I opened and fixed the = HOSTNAMES and changed it from "localhost-localdomain" to = "localhost.localdomain" and that made no difference.  Albeit, after = changing I didm;t restart, remove ovirtEngine ((using "engine-cleanup") = and reinstalled via "engine-setup".  Is that what you = mean=85?<br><br><br><br>In the mean time, the fact that even if I = resolve the issue of oVirtEngine I will not be able to connect to the = oVirt Nodes unless I have DNS resolution, apparently means I should do = something with resolving via DNS in my home LAN (i.e implement some sort = of "DNS Cache" so I can resolve my home computers via DNS inside my = LAN).<br><br>Any suggestions are MORE THAN WELCOME=85!!!<br> =  <br></blockquote><br>Having setup ovirt more than I can count = right now I share your feeling that it isn't always clear why things are = going wrong, but in this case I suspect that there is a rather small = thing missing.<br>In short if you setup ovirt-engine, either using = virtualbox or on real hardware, and you give your host a meaningfull = name AND you add that info also in your /etc/hosts file than things = SHOULD work, no need for dnsmasq or even bind. Would make things easier = once you start adding virt hosts to you infrastructure since you will = need to duplicate these actions on each host (add engine name/ip to each = host and add each host to the others and all hosts to = engine)<br><br>Just ask if you need more assistance and I will write = down a small howto that should work out of the box else I might have = some time to see if I can get things = going.<br><br>Regards,<br><br>Joop<br><br></blockquote></div><br></div></b= ody></html>= --Apple-Mail=_DF4BF6D1-1F87-4F60-9CF9-070D4D836241--

2 1

Re: [ovirt-users] Question about the ovirt-engine-sdk-java
by Michael Pasternak 15 May '19

15 May '19

------=_Part_1975902_834617789.1445161505459 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Hi=C2=A0Salifou, Actually java sdk is=C2=A0intentionally=C2=A0hiding transport level interna= ls so developers could stay in java domain,if your headers are static, easi= est way would be using reverse proxy in a middle to intercept requests,=C2= =A0 can you tell me why do you need this? =20 On Friday, October 16, 2015 1:14 AM, Salifou Sidi M. Malick <ssidimah@= redhat.com> wrote: =20 Hi Micheal, I have a question about the ovirt-engine-sdk-java. Is there a way to add custom request headers to each RHEVM API call? Here is an example of a request that I would like to do: $ curl -v -k \ =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 -H "ID: user1(a)ad.xyz.com" \ =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 -H "PASSWORD: Pwssd" \ =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 -H "TARGET: kobe" \ =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 https://vm0.smalick.com/api/hosts I would like to add ID, PASSWORD and TARGET as HTTP request header.=20 Thanks, Salifou ------=_Part_1975902_834617789.1445161505459 Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: quoted-printable <html><head></head><body><div style=3D"color:#000; background-color:#fff; f= ont-family:HelveticaNeue-Light, Helvetica Neue Light, Helvetica Neue, Helve= tica, Arial, Lucida Grande, sans-serif;font-size:13px"><div id=3D"yui_3_16_= 0_1_1445160422533_3555" dir=3D"ltr"><span id=3D"yui_3_16_0_1_1445160422533_= 4552">Hi </span><span style=3D"font-family: 'Helvetica Neue', 'Segoe U= I', Helvetica, Arial, 'Lucida Grande', sans-serif;" id=3D"yui_3_16_0_1_1445= 160422533_3568" class=3D"">Salifou,</span></div><div id=3D"yui_3_16_0_1_144= 5160422533_3555" dir=3D"ltr"><span style=3D"font-family: 'Helvetica Neue', = 'Segoe UI', Helvetica, Arial, 'Lucida Grande', sans-serif;" class=3D""><br>= </span></div><div id=3D"yui_3_16_0_1_1445160422533_3555" dir=3D"ltr"><span = style=3D"font-family: 'Helvetica Neue', 'Segoe UI', Helvetica, Arial, 'Luci= da Grande', sans-serif;" class=3D"" id=3D"yui_3_16_0_1_1445160422533_3595">= Actually java sdk is </span><span style=3D"font-family: 'Helvetica Neu= e', 'Segoe UI', Helvetica, Arial, 'Lucida Grande', sans-serif;" id=3D"yui_3= _16_0_1_1445160422533_4360" class=3D"">intentionally </span><span styl= e=3D"font-family: 'Helvetica Neue', 'Segoe UI', Helvetica, Arial, 'Lucida G= rande', sans-serif;" id=3D"yui_3_16_0_1_1445160422533_4362" class=3D"">hidi= ng transport level internals so developers could stay in java domain,</span= ></div><div id=3D"yui_3_16_0_1_1445160422533_3555" dir=3D"ltr"><span class= =3D"" id=3D"yui_3_16_0_1_1445160422533_4435"><font face=3D"Helvetica Neue, = Segoe UI, Helvetica, Arial, Lucida Grande, sans-serif" id=3D"yui_3_16_0_1_1= 445160422533_4432" class=3D"">if your headers are static, easiest way would= be using reverse proxy in a middle to intercept requests, </font><br>= </span></div><div id=3D"yui_3_16_0_1_1445160422533_3555" dir=3D"ltr"><span = class=3D""><font face=3D"Helvetica Neue, Segoe UI, Helvetica, Arial, Lucida= Grande, sans-serif" class=3D""><br></font></span></div><div id=3D"yui_3_16= _0_1_1445160422533_3555" dir=3D"ltr"><span style=3D"font-family: 'Helvetica= Neue', 'Segoe UI', Helvetica, Arial, 'Lucida Grande', sans-serif;" id=3D"y= ui_3_16_0_1_1445160422533_4357">can you tell me why do you need this?</span= ><br></div> <br><div class=3D"qtdSeparateBR"><br><br></div><div class=3D"y= ahoo_quoted" style=3D"display: block;"> <div style=3D"font-family: Helvetic= aNeue-Light, Helvetica Neue Light, Helvetica Neue, Helvetica, Arial, Lucida= Grande, sans-serif; font-size: 13px;"> <div style=3D"font-family: Helvetic= aNeue, Helvetica Neue, Helvetica, Arial, Lucida Grande, sans-serif; font-si= ze: 16px;"> <div dir=3D"ltr"> <font size=3D"2" face=3D"Arial"> On Friday, O= ctober 16, 2015 1:14 AM, Salifou Sidi M. Malick <ssidimah(a)redhat.com>= wrote:<br> </font> </div> <br><br> <div class=3D"y_msg_container">Hi Mich= eal,<br><br>I have a question about the ovirt-engine-sdk-java.<br><br>Is th= ere a way to add custom request headers to each RHEVM API call?<br><br>Here= is an example of a request that I would like to do:<br><br>$ curl -v -k \<= br>          -H "ID: <a ymailto=3D"mailto:user1@ad= .xyz.com" href=3D"mailto:user1@ad.xyz.com">user1(a)ad.xyz.com</a>" \<br>&nbsp= ;         -H "PASSWORD: Pwssd" \<br>    &nbsp= ;     -H "TARGET: kobe" \<br>          <= a href=3D"https://vm0.smalick.com/api/hosts" target=3D"_blank">https://vm0.= smalick.com/api/hosts</a><br><br><br>I would like to add ID, PASSWORD and T= ARGET as HTTP request header. <br><br>Thanks,<br>Salifou<br><br><br><br></d= iv> </div> </div> </div></div></body></html> ------=_Part_1975902_834617789.1445161505459--

2 1

[Users] oVirt Weekly Sync Meeting Minutes -- 2012-05-23
by Mike Burns 15 May '19

15 May '19

Minutes: http://ovirt.org/meetings/ovirt/2012/ovirt.2012-05-23-14.00.html Minutes (text): http://ovirt.org/meetings/ovirt/2012/ovirt.2012-05-23-14.00.txt Log: http://ovirt.org/meetings/ovirt/2012/ovirt.2012-05-23-14.00.log.html ========================= #ovirt: oVirt Weekly Sync ========================= Meeting started by mburns at 14:00:23 UTC. The full logs are available at http://ovirt.org/meetings/ovirt/2012/ovirt.2012-05-23-14.00.log.html . Meeting summary --------------- * agenda and roll call (mburns, 14:00:41) * Status of next release (mburns, 14:05:17) * LINK: https://bugzilla.redhat.com/show_bug.cgi?id=822145 (mburns, 14:05:29) * AGREED: freeze date and beta release delayed by 1 week to 2012-06-07 (mburns, 14:12:33) * post freeze, release notes flag needs to be used where required (mburns, 14:14:21) * https://bugzilla.redhat.com/show_bug.cgi?id=821867 is a VDSM blocker for 3.1 (oschreib, 14:17:27) * ACTION: dougsland to fix upstream vdsm right now, and open a bug on libvirt augeas (oschreib, 14:21:44) * LINK: https://bugzilla.redhat.com/show_bug.cgi?id=822158 (mburns, 14:23:39) * assignee not available, update to come tomorrow (mburns, 14:24:59) * ACTION: oschreib to make sure BZ#822158 is handled quickly (oschreib, 14:25:29) * LINK: https://bugzilla.redhat.com/show_bug.cgi?id=824397 (mburns, 14:28:55) * 824397 expected to be merged prior next week's meeting (mburns, 14:29:45) * LINK: https://bugzilla.redhat.com/show_bug.cgi?id=824420 (mburns, 14:30:15) * tracker for node based on F17 (mburns, 14:30:28) * blocked by util-linux bug currently (mburns, 14:30:40) * new build expected from util-linux maintainer in next couple days (mburns, 14:30:55) * sub-project status -- engine (mburns, 14:32:49) * nothing to report outside of blockers discussed above (mburns, 14:34:00) * sub-project status -- vdsm (mburns, 14:34:09) * nothing outside of blockers above (mburns, 14:35:36) * sub-project status -- node (mburns, 14:35:43) * working on f17 migration, but blocked by util-linux bug (mburns, 14:35:58) * should be ready for freeze deadline (mburns, 14:36:23) * Review decision on Java 7 and Fedora jboss rpms in oVirt Engine (mburns, 14:36:43) * Java7 basically working (mburns, 14:37:19) * LINK: http://gerrit.ovirt.org/#change,4416 (oschreib, 14:39:35) * engine will make ack/nack statement next week (mburns, 14:39:49) * fedora jboss rpms patch is in review, short tests passed (mburns, 14:40:04) * engine ack on fedora jboss rpms and java7 needed next week (mburns, 14:44:47) * Upcoming Workshops (mburns, 14:45:11) * NetApp workshop set for Jan 22-24 2013 (mburns, 14:47:16) * already at half capacity for Workshop at LinuxCon Japan (mburns, 14:47:37) * please continue to promote it (mburns, 14:48:19) * proposal: board meeting to be held at all major workshops (mburns, 14:48:43) * LINK: http://www.ovirt.org/wiki/OVirt_Global_Workshops (mburns, 14:49:30) * Open Discussion (mburns, 14:50:12) * oVirt/Quantum integration discussion will be held separately (mburns, 14:50:43) Meeting ended at 14:52:47 UTC. Action Items ------------ * dougsland to fix upstream vdsm right now, and open a bug on libvirt augeas * oschreib to make sure BZ#822158 is handled quickly Action Items, by person ----------------------- * dougsland * dougsland to fix upstream vdsm right now, and open a bug on libvirt augeas * oschreib * oschreib to make sure BZ#822158 is handled quickly * **UNASSIGNED** * (none) People Present (lines said) --------------------------- * mburns (98) * oschreib (55) * doronf (12) * lh (11) * sgordon (8) * dougsland (8) * ovirtbot (6) * ofrenkel (4) * cestila (2) * RobertMdroid (2) * ydary (2) * rickyh (1) * yzaslavs (1) * cctrieloff (1) * mestery_ (1) * dustins (1) Generated by `MeetBot`_ 0.1.4 .. _`MeetBot`: http://wiki.debian.org/MeetBot

2 1

[QE][ACTION REQUIRED] oVirt 3.5.1 RC status - postponed
by Sandro Bonazzola 15 May '19

15 May '19

Hi, We have still blockers for oVirt 3.5.1 RC release so we need to postpone it until they'll be fixed. The bug tracker [1] shows 1 open blocker: Bug ID Whiteboard Status Summary 1160846 sla NEW Can't add disk to VM without specifying disk profile when the storage domain has more than one disk profile In order to stabilize the release a new branch ovirt-engine-3.5.1 will be created from the same git hash used for composing the RC. - ACTION: Gilad please provide ETA on above blocker, the new proposed RC date will be decided on the given ETA. Maintainers: - Please be sure that 3.5 snapshot allow to create VMs - Please be sure that no pending patches are going to block the release - If any patch must block the RC release please raise the issue as soon as possible. There are still 57 bugs [2] targeted to 3.5.1. Excluding node and documentation bugs we still have 37 bugs [3] targeted to 3.5.1. Maintainers / Assignee: - Please add the bugs to the tracker if you think that 3.5.1 should not be released without them fixed. - ACTION: Please update the target to 3.5.2 or later for bugs that won't be in 3.5.1: it will ease gathering the blocking bugs for next releases. - ACTION: Please fill release notes, the page has been created here [4] Community: - If you're testing oVirt 3.5 nightly snapshot, please add yourself to the test page [5] [1] http://bugzilla.redhat.com/1155170 [2] http://goo.gl/7G0PDV [3] http://goo.gl/6gUbVr [4] http://www.ovirt.org/OVirt_3.5.1_Release_Notes [5] http://www.ovirt.org/Testing/oVirt_3.5.1_Testing -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

2 1

VM has paused due to no storage space error
by Sandvik Agustin 15 May '19

15 May '19

Hi users, I have this problem that sometimes 1 to 3 VM just automatically paused with user interaction and getting this error "VM has paused due to no storage space error". any inputs from you guys are very appreciated. TIA Sandvik

5 5

VM Import from remote libvirt Server on web gui with Host key verification failed or permission denied error
by Rogério Ceni Coelho 15 May '19

15 May '19

Hi Ovirt Jedi´s !!! First of all, congratulations for this amazing product. I am an Vmware and Hyper-V Engineer but i am very excited with oVirt. Now, let´s go to work ... :-) I am trying to Import vm from remote libvirt server on web gui but i was unable to solve the problem until now. [image: pasted1] Node logs : [root@hlg-rbs-ovirt-kvm01-poa ~]# tail -f /var/log/vdsm/vdsm.log | grep -i error | grep -v Host.getStats jsonrpc.Executor/0::ERROR::2016-10-06 10:24:52,432::v2v::151::root::(get_external_vms) error connection to hypervisor: 'Cannot recv data: Permission denied, please try again.\r\nPermission denied, please try again.\r\nPermission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer' jsonrpc.Executor/0::INFO::2016-10-06 10:24:52,433::__init__::513::jsonrpc.JsonRpcServer::(_serveRequest) RPC call Host.getExternalVMs failed (error 65) in 10.05 seconds [root@hlg-rbs-ovirt-kvm02-poa ~]# grep error /var/log/vdsm/vdsm.log | grep get_external_vms jsonrpc.Executor/7::ERROR::2016-10-06 10:25:37,344::v2v::151::root::(get_external_vms) error connection to hypervisor: 'Cannot recv data: Host key verification failed.: Connection reset by peer' [root@hlg-rbs-ovirt-kvm02-poa ~]# Engine Logs : [root@hlg-rbs-ovirt01-poa ~]# tail -f /var/log/ovirt-engine/engine.log 2016-10-06 10:24:42,377 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-97) [] START, GetVmsFromExternalProviderVDSCommand(HostName = hlg-rbs-ovirt-kvm01-poa.rbs.com.br, GetVmsFromExternalProviderParameters:{runAsync='true', hostId='5feddfba-d7b2-423e-a946-ac2bf36906fa', url='qemu+ssh:// root(a)prd-openshift-kvm03-poa.rbs.com.br/system', username='root', originType='KVM'}), log id: eb750c7 *2016-10-06 10:24:53,435 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-97) [] Unexpected return value: StatusForXmlRpc [code=65, message=Cannot recv data: Permission denied, please try again.* *Permission denied, please try again.* *Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer]* 2016-10-06 10:24:53,435 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-97) [] Failed in 'GetVmsFromExternalProviderVDS' method 2016-10-06 10:24:53,435 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-97) [] Unexpected return value: StatusForXmlRpc [code=65, message=Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer] 2016-10-06 10:24:53,454 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-97) [] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: VDSM hlg-rbs-ovirt-kvm01-poa.rbs.com.br command failed: Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer 2016-10-06 10:24:53,454 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-97) [] Command 'org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand' return value 'org.ovirt.engine.core.vdsbroker.vdsbroker.VMListReturnForXmlRpc@6c6f696c' 2016-10-06 10:24:53,454 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-97) [] HostName = hlg-rbs-ovirt-kvm01-poa.rbs.com.br 2016-10-06 10:24:53,454 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-97) [] Command 'GetVmsFromExternalProviderVDSCommand(HostName = hlg-rbs-ovirt-kvm01-poa.rbs.com.br, GetVmsFromExternalProviderParameters:{runAsync='true', hostId='5feddfba-d7b2-423e-a946-ac2bf36906fa', url='qemu+ssh:// root(a)prd-openshift-kvm03-poa.rbs.com.br/system', username='root', originType='KVM'})' execution failed: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer, code = 65 2016-10-06 10:24:53,454 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-97) [] FINISH, GetVmsFromExternalProviderVDSCommand, log id: eb750c7 2016-10-06 10:24:53,459 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-97) [] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: Failed to retrieve VMs information from external server qemu+ssh://root@prd-openshift-kvm03-poa.rbs.com.br/system 2016-10-06 10:24:53,459 ERROR [org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery] (default task-97) [] Query 'GetVmsFromExternalProviderQuery' failed: EngineException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer, code = 65 (Failed with error unexpected and code 16) 2016-10-06 10:24:53,460 ERROR [org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery] (default task-97) [] Exception: org.ovirt.engine.core.common.errors.EngineException: EngineException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer, code = 65 (Failed with error unexpected and code 16) at org.ovirt.engine.core.bll.VdsHandler.handleVdsResult(VdsHandler.java:114) [bll.jar:] at org.ovirt.engine.core.bll.VDSBrokerFrontendImpl.runVdsCommand(VDSBrokerFrontendImpl.java:33) [bll.jar:] at org.ovirt.engine.core.bll.QueriesCommandBase.runVdsCommand(QueriesCommandBase.java:257) [bll.jar:] at org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery.getVmsFromExternalProvider(GetVmsFromExternalProviderQuery.java:32) [bll.jar:] at org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery.executeQueryCommand(GetVmsFromExternalProviderQuery.java:27) [bll.jar:] at org.ovirt.engine.core.bll.QueriesCommandBase.executeCommand(QueriesCommandBase.java:103) [bll.jar:] at org.ovirt.engine.core.dal.VdcCommandBase.execute(VdcCommandBase.java:33) [dal.jar:] at org.ovirt.engine.core.bll.Backend.runQueryImpl(Backend.java:558) [bll.jar:] at org.ovirt.engine.core.bll.Backend.runQuery(Backend.java:529) [bll.jar:] at sun.reflect.GeneratedMethodAccessor181.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at org.jboss.as.ee.component.ManagedReferenceMethodInterceptor.processInvocation(ManagedReferenceMethodInterceptor.java:52) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.delegateInterception(Jsr299BindingsInterceptor.java:70) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.doMethodInterception(Jsr299BindingsInterceptor.java:80) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.processInvocation(Jsr299BindingsInterceptor.java:93) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ee.component.interceptors.UserInterceptorFactory$1.processInvocation(UserInterceptorFactory.java:63) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.ovirt.engine.core.bll.interceptors.CorrelationIdTrackerInterceptor.aroundInvoke(CorrelationIdTrackerInterceptor.java:13) [bll.jar:] at sun.reflect.GeneratedMethodAccessor179.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at org.jboss.as.ee.component.ManagedReferenceLifecycleMethodInterceptor.processInvocation(ManagedReferenceLifecycleMethodInterceptor.java:89) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.invocationmetrics.ExecutionTimeInterceptor.processInvocation(ExecutionTimeInterceptor.java:43) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.jboss.weld.ejb.AbstractEJBRequestScopeActivationInterceptor.aroundInvoke(AbstractEJBRequestScopeActivationInterceptor.java:73) [weld-core-impl-2.3.2.Final.jar:2.3.2.Final] at org.jboss.as.weld.ejb.EjbRequestScopeActivationInterceptor.processInvocation(EjbRequestScopeActivationInterceptor.java:83) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ee.concurrent.ConcurrentContextInterceptor.processInvocation(ConcurrentContextInterceptor.java:45) [wildfly-ee-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InitialInterceptor.processInvocation(InitialInterceptor.java:21) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.interceptors.ComponentDispatcherInterceptor.processInvocation(ComponentDispatcherInterceptor.java:52) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.singleton.SingletonComponentInstanceAssociationInterceptor.processInvocation(SingletonComponentInstanceAssociationInterceptor.java:53) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.tx.CMTTxInterceptor.invokeInNoTx(CMTTxInterceptor.java:263) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ejb3.tx.CMTTxInterceptor.supports(CMTTxInterceptor.java:374) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ejb3.tx.CMTTxInterceptor.processInvocation(CMTTxInterceptor.java:243) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.CurrentInvocationContextInterceptor.processInvocation(CurrentInvocationContextInterceptor.java:41) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.invocationmetrics.WaitTimeInterceptor.processInvocation(WaitTimeInterceptor.java:43) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.security.SecurityContextInterceptor.processInvocation(SecurityContextInterceptor.java:100) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.ShutDownInterceptorFactory$1.processInvocation(ShutDownInterceptorFactory.java:64) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.LoggingInterceptor.processInvocation(LoggingInterceptor.java:66) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ee.component.NamespaceContextInterceptor.processInvocation(NamespaceContextInterceptor.java:50) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ContextClassLoaderInterceptor.processInvocation(ContextClassLoaderInterceptor.java:64) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:356) at org.wildfly.security.manager.WildFlySecurityManager.doChecked(WildFlySecurityManager.java:636) at org.jboss.invocation.AccessCheckingInterceptor.processInvocation(AccessCheckingInterceptor.java:61) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:356) at org.jboss.invocation.PrivilegedWithCombinerInterceptor.processInvocation(PrivilegedWithCombinerInterceptor.java:80) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.ViewService$View.invoke(ViewService.java:195) at org.jboss.as.ee.component.ViewDescription$1.processInvocation(ViewDescription.java:185) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.ProxyInvocationHandler.invoke(ProxyInvocationHandler.java:73) at org.ovirt.engine.core.common.interfaces.BackendLocal$$$view3.runQuery(Unknown Source) [common.jar:] at org.ovirt.engine.ui.frontend.server.gwt.GenericApiGWTServiceImpl.runQuery(GenericApiGWTServiceImpl.java:53) at sun.reflect.GeneratedMethodAccessor222.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at com.google.gwt.rpc.server.RPC.invokeAndStreamResponse(RPC.java:196) at com.google.gwt.rpc.server.RpcServlet.processCall(RpcServlet.java:172) at com.google.gwt.rpc.server.RpcServlet.processPost(RpcServlet.java:233) at com.google.gwt.user.server.rpc.AbstractRemoteServiceServlet.doPost(AbstractRemoteServiceServlet.java:62) at javax.servlet.http.HttpServlet.service(HttpServlet.java:707) [jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final] at javax.servlet.http.HttpServlet.service(HttpServlet.java:790) [jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final] at io.undertow.servlet.handlers.ServletHandler.handleRequest(ServletHandler.java:85) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:129) at org.ovirt.engine.core.utils.servlet.HeaderFilter.doFilter(HeaderFilter.java:94) [utils.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.ui.frontend.server.gwt.GwtCachingFilter.doFilter(GwtCachingFilter.java:132) at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.core.branding.BrandingFilter.doFilter(BrandingFilter.java:73) [branding.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.core.utils.servlet.LocaleFilter.doFilter(LocaleFilter.java:66) [utils.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at io.undertow.servlet.handlers.FilterHandler.handleRequest(FilterHandler.java:84) at io.undertow.servlet.handlers.security.ServletSecurityRoleHandler.handleRequest(ServletSecurityRoleHandler.java:62) at io.undertow.servlet.handlers.ServletDispatchingHandler.handleRequest(ServletDispatchingHandler.java:36) at org.wildfly.extension.undertow.security.SecurityContextAssociationHandler.handleRequest(SecurityContextAssociationHandler.java:78) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.servlet.handlers.security.SSLInformationAssociationHandler.handleRequest(SSLInformationAssociationHandler.java:131) at io.undertow.servlet.handlers.security.ServletAuthenticationCallHandler.handleRequest(ServletAuthenticationCallHandler.java:57) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.security.handlers.AuthenticationConstraintHandler.handleRequest(AuthenticationConstraintHandler.java:51) at io.undertow.security.handlers.AbstractConfidentialityHandler.handleRequest(AbstractConfidentialityHandler.java:46) at io.undertow.servlet.handlers.security.ServletConfidentialityConstraintHandler.handleRequest(ServletConfidentialityConstraintHandler.java:64) at io.undertow.servlet.handlers.security.ServletSecurityConstraintHandler.handleRequest(ServletSecurityConstraintHandler.java:56) at io.undertow.security.handlers.AuthenticationMechanismsHandler.handleRequest(AuthenticationMechanismsHandler.java:60) at io.undertow.servlet.handlers.security.CachedAuthenticatedSessionHandler.handleRequest(CachedAuthenticatedSessionHandler.java:77) at io.undertow.security.handlers.NotificationReceiverHandler.handleRequest(NotificationReceiverHandler.java:50) at io.undertow.security.handlers.AbstractSecurityContextAssociationHandler.handleRequest(AbstractSecurityContextAssociationHandler.java:43) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at org.wildfly.extension.undertow.security.jacc.JACCContextIdHandler.handleRequest(JACCContextIdHandler.java:61) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.servlet.handlers.ServletInitialHandler.handleFirstRequest(ServletInitialHandler.java:284) at io.undertow.servlet.handlers.ServletInitialHandler.dispatchRequest(ServletInitialHandler.java:263) at io.undertow.servlet.handlers.ServletInitialHandler.access$000(ServletInitialHandler.java:81) at io.undertow.servlet.handlers.ServletInitialHandler$1.handleRequest(ServletInitialHandler.java:174) at io.undertow.server.Connectors.executeRootHandler(Connectors.java:202) at io.undertow.server.HttpServerExchange$1.run(HttpServerExchange.java:793) at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142) [rt.jar:1.8.0_102] at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617) [rt.jar:1.8.0_102] at java.lang.Thread.run(Thread.java:745) [rt.jar:1.8.0_102] 2016-10-06 10:25:27,202 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-113) [] START, GetVmsFromExternalProviderVDSCommand(HostName = hlg-rbs-ovirt-kvm02-poa.rbs.com.br, GetVmsFromExternalProviderParameters:{runAsync='true', hostId='f9c9d929-b460-4102-bb29-de1e6ad6ad72', url='qemu+ssh:// root(a)prd-openshift-kvm03-poa.rbs.com.br/system', username='root', originType='KVM'}), log id: 4f3174a6 *2016-10-06 10:25:38,338 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-113) [] Unexpected return value: StatusForXmlRpc [code=65, message=Cannot recv data: Host key verification failed.: Connection reset by peer]* 2016-10-06 10:25:38,338 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-113) [] Failed in 'GetVmsFromExternalProviderVDS' method 2016-10-06 10:25:38,338 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-113) [] Unexpected return value: StatusForXmlRpc [code=65, message=Cannot recv data: Host key verification failed.: Connection reset by peer] 2016-10-06 10:25:38,343 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-113) [] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: VDSM hlg-rbs-ovirt-kvm02-poa.rbs.com.br command failed: Cannot recv data: Host key verification failed.: Connection reset by peer 2016-10-06 10:25:38,343 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-113) [] Command 'org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand' return value 'org.ovirt.engine.core.vdsbroker.vdsbroker.VMListReturnForXmlRpc@42dd60af' 2016-10-06 10:25:38,343 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-113) [] HostName = hlg-rbs-ovirt-kvm02-poa.rbs.com.br 2016-10-06 10:25:38,343 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-113) [] Command 'GetVmsFromExternalProviderVDSCommand(HostName = hlg-rbs-ovirt-kvm02-poa.rbs.com.br, GetVmsFromExternalProviderParameters:{runAsync='true', hostId='f9c9d929-b460-4102-bb29-de1e6ad6ad72', url='qemu+ssh:// root(a)prd-openshift-kvm03-poa.rbs.com.br/system', username='root', originType='KVM'})' execution failed: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Host key verification failed.: Connection reset by peer, code = 65 2016-10-06 10:25:38,343 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-113) [] FINISH, GetVmsFromExternalProviderVDSCommand, log id: 4f3174a6 2016-10-06 10:25:38,344 ERROR [org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery] (default task-113) [] Query 'GetVmsFromExternalProviderQuery' failed: EngineException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Host key verification failed.: Connection reset by peer, code = 65 (Failed with error unexpected and code 16) 2016-10-06 10:25:38,345 ERROR [org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery] (default task-113) [] Exception: org.ovirt.engine.core.common.errors.EngineException: EngineException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Host key verification failed.: Connection reset by peer, code = 65 (Failed with error unexpected and code 16) at org.ovirt.engine.core.bll.VdsHandler.handleVdsResult(VdsHandler.java:114) [bll.jar:] at org.ovirt.engine.core.bll.VDSBrokerFrontendImpl.runVdsCommand(VDSBrokerFrontendImpl.java:33) [bll.jar:] at org.ovirt.engine.core.bll.QueriesCommandBase.runVdsCommand(QueriesCommandBase.java:257) [bll.jar:] at org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery.getVmsFromExternalProvider(GetVmsFromExternalProviderQuery.java:32) [bll.jar:] at org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery.executeQueryCommand(GetVmsFromExternalProviderQuery.java:27) [bll.jar:] at org.ovirt.engine.core.bll.QueriesCommandBase.executeCommand(QueriesCommandBase.java:103) [bll.jar:] at org.ovirt.engine.core.dal.VdcCommandBase.execute(VdcCommandBase.java:33) [dal.jar:] at org.ovirt.engine.core.bll.Backend.runQueryImpl(Backend.java:558) [bll.jar:] at org.ovirt.engine.core.bll.Backend.runQuery(Backend.java:529) [bll.jar:] at sun.reflect.GeneratedMethodAccessor181.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at org.jboss.as.ee.component.ManagedReferenceMethodInterceptor.processInvocation(ManagedReferenceMethodInterceptor.java:52) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.delegateInterception(Jsr299BindingsInterceptor.java:70) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.doMethodInterception(Jsr299BindingsInterceptor.java:80) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.processInvocation(Jsr299BindingsInterceptor.java:93) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ee.component.interceptors.UserInterceptorFactory$1.processInvocation(UserInterceptorFactory.java:63) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.ovirt.engine.core.bll.interceptors.CorrelationIdTrackerInterceptor.aroundInvoke(CorrelationIdTrackerInterceptor.java:13) [bll.jar:] at sun.reflect.GeneratedMethodAccessor179.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at org.jboss.as.ee.component.ManagedReferenceLifecycleMethodInterceptor.processInvocation(ManagedReferenceLifecycleMethodInterceptor.java:89) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.invocationmetrics.ExecutionTimeInterceptor.processInvocation(ExecutionTimeInterceptor.java:43) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.jboss.weld.ejb.AbstractEJBRequestScopeActivationInterceptor.aroundInvoke(AbstractEJBRequestScopeActivationInterceptor.java:73) [weld-core-impl-2.3.2.Final.jar:2.3.2.Final] at org.jboss.as.weld.ejb.EjbRequestScopeActivationInterceptor.processInvocation(EjbRequestScopeActivationInterceptor.java:83) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ee.concurrent.ConcurrentContextInterceptor.processInvocation(ConcurrentContextInterceptor.java:45) [wildfly-ee-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InitialInterceptor.processInvocation(InitialInterceptor.java:21) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.interceptors.ComponentDispatcherInterceptor.processInvocation(ComponentDispatcherInterceptor.java:52) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.singleton.SingletonComponentInstanceAssociationInterceptor.processInvocation(SingletonComponentInstanceAssociationInterceptor.java:53) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.tx.CMTTxInterceptor.invokeInNoTx(CMTTxInterceptor.java:263) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ejb3.tx.CMTTxInterceptor.supports(CMTTxInterceptor.java:374) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ejb3.tx.CMTTxInterceptor.processInvocation(CMTTxInterceptor.java:243) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.CurrentInvocationContextInterceptor.processInvocation(CurrentInvocationContextInterceptor.java:41) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.invocationmetrics.WaitTimeInterceptor.processInvocation(WaitTimeInterceptor.java:43) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.security.SecurityContextInterceptor.processInvocation(SecurityContextInterceptor.java:100) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.ShutDownInterceptorFactory$1.processInvocation(ShutDownInterceptorFactory.java:64) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.LoggingInterceptor.processInvocation(LoggingInterceptor.java:66) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ee.component.NamespaceContextInterceptor.processInvocation(NamespaceContextInterceptor.java:50) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ContextClassLoaderInterceptor.processInvocation(ContextClassLoaderInterceptor.java:64) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:356) at org.wildfly.security.manager.WildFlySecurityManager.doChecked(WildFlySecurityManager.java:636) at org.jboss.invocation.AccessCheckingInterceptor.processInvocation(AccessCheckingInterceptor.java:61) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:356) at org.jboss.invocation.PrivilegedWithCombinerInterceptor.processInvocation(PrivilegedWithCombinerInterceptor.java:80) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.ViewService$View.invoke(ViewService.java:195) at org.jboss.as.ee.component.ViewDescription$1.processInvocation(ViewDescription.java:185) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.ProxyInvocationHandler.invoke(ProxyInvocationHandler.java:73) at org.ovirt.engine.core.common.interfaces.BackendLocal$$$view3.runQuery(Unknown Source) [common.jar:] at org.ovirt.engine.ui.frontend.server.gwt.GenericApiGWTServiceImpl.runQuery(GenericApiGWTServiceImpl.java:53) at sun.reflect.GeneratedMethodAccessor222.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at com.google.gwt.rpc.server.RPC.invokeAndStreamResponse(RPC.java:196) at com.google.gwt.rpc.server.RpcServlet.processCall(RpcServlet.java:172) at com.google.gwt.rpc.server.RpcServlet.processPost(RpcServlet.java:233) at com.google.gwt.user.server.rpc.AbstractRemoteServiceServlet.doPost(AbstractRemoteServiceServlet.java:62) at javax.servlet.http.HttpServlet.service(HttpServlet.java:707) [jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final] at javax.servlet.http.HttpServlet.service(HttpServlet.java:790) [jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final] at io.undertow.servlet.handlers.ServletHandler.handleRequest(ServletHandler.java:85) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:129) at org.ovirt.engine.core.utils.servlet.HeaderFilter.doFilter(HeaderFilter.java:94) [utils.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.ui.frontend.server.gwt.GwtCachingFilter.doFilter(GwtCachingFilter.java:132) at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.core.branding.BrandingFilter.doFilter(BrandingFilter.java:73) [branding.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.core.utils.servlet.LocaleFilter.doFilter(LocaleFilter.java:66) [utils.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at io.undertow.servlet.handlers.FilterHandler.handleRequest(FilterHandler.java:84) at io.undertow.servlet.handlers.security.ServletSecurityRoleHandler.handleRequest(ServletSecurityRoleHandler.java:62) at io.undertow.servlet.handlers.ServletDispatchingHandler.handleRequest(ServletDispatchingHandler.java:36) at org.wildfly.extension.undertow.security.SecurityContextAssociationHandler.handleRequest(SecurityContextAssociationHandler.java:78) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.servlet.handlers.security.SSLInformationAssociationHandler.handleRequest(SSLInformationAssociationHandler.java:131) at io.undertow.servlet.handlers.security.ServletAuthenticationCallHandler.handleRequest(ServletAuthenticationCallHandler.java:57) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.security.handlers.AuthenticationConstraintHandler.handleRequest(AuthenticationConstraintHandler.java:51) at io.undertow.security.handlers.AbstractConfidentialityHandler.handleRequest(AbstractConfidentialityHandler.java:46) at io.undertow.servlet.handlers.security.ServletConfidentialityConstraintHandler.handleRequest(ServletConfidentialityConstraintHandler.java:64) at io.undertow.servlet.handlers.security.ServletSecurityConstraintHandler.handleRequest(ServletSecurityConstraintHandler.java:56) at io.undertow.security.handlers.AuthenticationMechanismsHandler.handleRequest(AuthenticationMechanismsHandler.java:60) at io.undertow.servlet.handlers.security.CachedAuthenticatedSessionHandler.handleRequest(CachedAuthenticatedSessionHandler.java:77) at io.undertow.security.handlers.NotificationReceiverHandler.handleRequest(NotificationReceiverHandler.java:50) at io.undertow.security.handlers.AbstractSecurityContextAssociationHandler.handleRequest(AbstractSecurityContextAssociationHandler.java:43) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at org.wildfly.extension.undertow.security.jacc.JACCContextIdHandler.handleRequest(JACCContextIdHandler.java:61) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.servlet.handlers.ServletInitialHandler.handleFirstRequest(ServletInitialHandler.java:284) at io.undertow.servlet.handlers.ServletInitialHandler.dispatchRequest(ServletInitialHandler.java:263) at io.undertow.servlet.handlers.ServletInitialHandler.access$000(ServletInitialHandler.java:81) at io.undertow.servlet.handlers.ServletInitialHandler$1.handleRequest(ServletInitialHandler.java:174) at io.undertow.server.Connectors.executeRootHandler(Connectors.java:202) at io.undertow.server.HttpServerExchange$1.run(HttpServerExchange.java:793) at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142) [rt.jar:1.8.0_102] at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617) [rt.jar:1.8.0_102] at java.lang.Thread.run(Thread.java:745) [rt.jar:1.8.0_102] 2016-10-06 10:25:52,527 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-118) [] START, GetVmsFromExternalProviderVDSCommand(HostName = hlg-rbs-ovirt-kvm03-poa.rbs.com.br, GetVmsFromExternalProviderParameters:{runAsync='true', hostId='02ead14e-0208-4a74-b1c2-4c19383820f9', url='qemu+ssh:// root(a)prd-openshift-kvm03-poa.rbs.com.br/system', username='root', originType='KVM'}), log id: 7c8b1e2d 2016-10-06 10:26:02,695 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-118) [] Unexpected return value: StatusForXmlRpc [code=65, message=Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer] 2016-10-06 10:26:02,695 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-118) [] Failed in 'GetVmsFromExternalProviderVDS' method 2016-10-06 10:26:02,696 WARN [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-118) [] Unexpected return value: StatusForXmlRpc [code=65, message=Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer] 2016-10-06 10:26:02,701 ERROR [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default task-118) [] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: VDSM hlg-rbs-ovirt-kvm03-poa.rbs.com.br command failed: Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer 2016-10-06 10:26:02,701 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-118) [] Command 'org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand' return value 'org.ovirt.engine.core.vdsbroker.vdsbroker.VMListReturnForXmlRpc@5ce9f7f2' 2016-10-06 10:26:02,701 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-118) [] HostName = hlg-rbs-ovirt-kvm03-poa.rbs.com.br 2016-10-06 10:26:02,701 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-118) [] Command 'GetVmsFromExternalProviderVDSCommand(HostName = hlg-rbs-ovirt-kvm03-poa.rbs.com.br, GetVmsFromExternalProviderParameters:{runAsync='true', hostId='02ead14e-0208-4a74-b1c2-4c19383820f9', url='qemu+ssh:// root(a)prd-openshift-kvm03-poa.rbs.com.br/system', username='root', originType='KVM'})' execution failed: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer, code = 65 2016-10-06 10:26:02,701 INFO [org.ovirt.engine.core.vdsbroker.vdsbroker.GetVmsFromExternalProviderVDSCommand] (default task-118) [] FINISH, GetVmsFromExternalProviderVDSCommand, log id: 7c8b1e2d 2016-10-06 10:26:02,701 ERROR [org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery] (default task-118) [] Query 'GetVmsFromExternalProviderQuery' failed: EngineException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer, code = 65 (Failed with error unexpected and code 16) 2016-10-06 10:26:02,701 ERROR [org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery] (default task-118) [] Exception: org.ovirt.engine.core.common.errors.EngineException: EngineException: org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: VDSGenericException: VDSErrorException: Failed to GetVmsFromExternalProviderVDS, error = Cannot recv data: Permission denied, please try again. Permission denied, please try again. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password).: Connection reset by peer, code = 65 (Failed with error unexpected and code 16) at org.ovirt.engine.core.bll.VdsHandler.handleVdsResult(VdsHandler.java:114) [bll.jar:] at org.ovirt.engine.core.bll.VDSBrokerFrontendImpl.runVdsCommand(VDSBrokerFrontendImpl.java:33) [bll.jar:] at org.ovirt.engine.core.bll.QueriesCommandBase.runVdsCommand(QueriesCommandBase.java:257) [bll.jar:] at org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery.getVmsFromExternalProvider(GetVmsFromExternalProviderQuery.java:32) [bll.jar:] at org.ovirt.engine.core.bll.GetVmsFromExternalProviderQuery.executeQueryCommand(GetVmsFromExternalProviderQuery.java:27) [bll.jar:] at org.ovirt.engine.core.bll.QueriesCommandBase.executeCommand(QueriesCommandBase.java:103) [bll.jar:] at org.ovirt.engine.core.dal.VdcCommandBase.execute(VdcCommandBase.java:33) [dal.jar:] at org.ovirt.engine.core.bll.Backend.runQueryImpl(Backend.java:558) [bll.jar:] at org.ovirt.engine.core.bll.Backend.runQuery(Backend.java:529) [bll.jar:] at sun.reflect.GeneratedMethodAccessor181.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at org.jboss.as.ee.component.ManagedReferenceMethodInterceptor.processInvocation(ManagedReferenceMethodInterceptor.java:52) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.delegateInterception(Jsr299BindingsInterceptor.java:70) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.doMethodInterception(Jsr299BindingsInterceptor.java:80) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.weld.ejb.Jsr299BindingsInterceptor.processInvocation(Jsr299BindingsInterceptor.java:93) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ee.component.interceptors.UserInterceptorFactory$1.processInvocation(UserInterceptorFactory.java:63) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.ovirt.engine.core.bll.interceptors.CorrelationIdTrackerInterceptor.aroundInvoke(CorrelationIdTrackerInterceptor.java:13) [bll.jar:] at sun.reflect.GeneratedMethodAccessor179.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at org.jboss.as.ee.component.ManagedReferenceLifecycleMethodInterceptor.processInvocation(ManagedReferenceLifecycleMethodInterceptor.java:89) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.invocationmetrics.ExecutionTimeInterceptor.processInvocation(ExecutionTimeInterceptor.java:43) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext$Invocation.proceed(InterceptorContext.java:437) at org.jboss.weld.ejb.AbstractEJBRequestScopeActivationInterceptor.aroundInvoke(AbstractEJBRequestScopeActivationInterceptor.java:73) [weld-core-impl-2.3.2.Final.jar:2.3.2.Final] at org.jboss.as.weld.ejb.EjbRequestScopeActivationInterceptor.processInvocation(EjbRequestScopeActivationInterceptor.java:83) [wildfly-weld-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ee.concurrent.ConcurrentContextInterceptor.processInvocation(ConcurrentContextInterceptor.java:45) [wildfly-ee-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InitialInterceptor.processInvocation(InitialInterceptor.java:21) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.interceptors.ComponentDispatcherInterceptor.processInvocation(ComponentDispatcherInterceptor.java:52) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.singleton.SingletonComponentInstanceAssociationInterceptor.processInvocation(SingletonComponentInstanceAssociationInterceptor.java:53) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.tx.CMTTxInterceptor.invokeInNoTx(CMTTxInterceptor.java:263) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ejb3.tx.CMTTxInterceptor.supports(CMTTxInterceptor.java:374) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.as.ejb3.tx.CMTTxInterceptor.processInvocation(CMTTxInterceptor.java:243) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.CurrentInvocationContextInterceptor.processInvocation(CurrentInvocationContextInterceptor.java:41) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.invocationmetrics.WaitTimeInterceptor.processInvocation(WaitTimeInterceptor.java:43) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.security.SecurityContextInterceptor.processInvocation(SecurityContextInterceptor.java:100) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.ShutDownInterceptorFactory$1.processInvocation(ShutDownInterceptorFactory.java:64) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ejb3.component.interceptors.LoggingInterceptor.processInvocation(LoggingInterceptor.java:66) [wildfly-ejb3-10.0.0.Final.jar:10.0.0.Final] at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.as.ee.component.NamespaceContextInterceptor.processInvocation(NamespaceContextInterceptor.java:50) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ContextClassLoaderInterceptor.processInvocation(ContextClassLoaderInterceptor.java:64) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:356) at org.wildfly.security.manager.WildFlySecurityManager.doChecked(WildFlySecurityManager.java:636) at org.jboss.invocation.AccessCheckingInterceptor.processInvocation(AccessCheckingInterceptor.java:61) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.InterceptorContext.run(InterceptorContext.java:356) at org.jboss.invocation.PrivilegedWithCombinerInterceptor.processInvocation(PrivilegedWithCombinerInterceptor.java:80) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.ViewService$View.invoke(ViewService.java:195) at org.jboss.as.ee.component.ViewDescription$1.processInvocation(ViewDescription.java:185) at org.jboss.invocation.InterceptorContext.proceed(InterceptorContext.java:340) at org.jboss.invocation.ChainedInterceptor.processInvocation(ChainedInterceptor.java:61) at org.jboss.as.ee.component.ProxyInvocationHandler.invoke(ProxyInvocationHandler.java:73) at org.ovirt.engine.core.common.interfaces.BackendLocal$$$view3.runQuery(Unknown Source) [common.jar:] at org.ovirt.engine.ui.frontend.server.gwt.GenericApiGWTServiceImpl.runQuery(GenericApiGWTServiceImpl.java:53) at sun.reflect.GeneratedMethodAccessor222.invoke(Unknown Source) [:1.8.0_102] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) [rt.jar:1.8.0_102] at java.lang.reflect.Method.invoke(Method.java:498) [rt.jar:1.8.0_102] at com.google.gwt.rpc.server.RPC.invokeAndStreamResponse(RPC.java:196) at com.google.gwt.rpc.server.RpcServlet.processCall(RpcServlet.java:172) at com.google.gwt.rpc.server.RpcServlet.processPost(RpcServlet.java:233) at com.google.gwt.user.server.rpc.AbstractRemoteServiceServlet.doPost(AbstractRemoteServiceServlet.java:62) at javax.servlet.http.HttpServlet.service(HttpServlet.java:707) [jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final] at javax.servlet.http.HttpServlet.service(HttpServlet.java:790) [jboss-servlet-api_3.1_spec-1.0.0.Final.jar:1.0.0.Final] at io.undertow.servlet.handlers.ServletHandler.handleRequest(ServletHandler.java:85) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:129) at org.ovirt.engine.core.utils.servlet.HeaderFilter.doFilter(HeaderFilter.java:94) [utils.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.ui.frontend.server.gwt.GwtCachingFilter.doFilter(GwtCachingFilter.java:132) at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.core.branding.BrandingFilter.doFilter(BrandingFilter.java:73) [branding.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at org.ovirt.engine.core.utils.servlet.LocaleFilter.doFilter(LocaleFilter.java:66) [utils.jar:] at io.undertow.servlet.core.ManagedFilter.doFilter(ManagedFilter.java:60) at io.undertow.servlet.handlers.FilterHandler$FilterChainImpl.doFilter(FilterHandler.java:131) at io.undertow.servlet.handlers.FilterHandler.handleRequest(FilterHandler.java:84) at io.undertow.servlet.handlers.security.ServletSecurityRoleHandler.handleRequest(ServletSecurityRoleHandler.java:62) at io.undertow.servlet.handlers.ServletDispatchingHandler.handleRequest(ServletDispatchingHandler.java:36) at org.wildfly.extension.undertow.security.SecurityContextAssociationHandler.handleRequest(SecurityContextAssociationHandler.java:78) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.servlet.handlers.security.SSLInformationAssociationHandler.handleRequest(SSLInformationAssociationHandler.java:131) at io.undertow.servlet.handlers.security.ServletAuthenticationCallHandler.handleRequest(ServletAuthenticationCallHandler.java:57) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.security.handlers.AuthenticationConstraintHandler.handleRequest(AuthenticationConstraintHandler.java:51) at io.undertow.security.handlers.AbstractConfidentialityHandler.handleRequest(AbstractConfidentialityHandler.java:46) at io.undertow.servlet.handlers.security.ServletConfidentialityConstraintHandler.handleRequest(ServletConfidentialityConstraintHandler.java:64) at io.undertow.servlet.handlers.security.ServletSecurityConstraintHandler.handleRequest(ServletSecurityConstraintHandler.java:56) at io.undertow.security.handlers.AuthenticationMechanismsHandler.handleRequest(AuthenticationMechanismsHandler.java:60) at io.undertow.servlet.handlers.security.CachedAuthenticatedSessionHandler.handleRequest(CachedAuthenticatedSessionHandler.java:77) at io.undertow.security.handlers.NotificationReceiverHandler.handleRequest(NotificationReceiverHandler.java:50) at io.undertow.security.handlers.AbstractSecurityContextAssociationHandler.handleRequest(AbstractSecurityContextAssociationHandler.java:43) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at org.wildfly.extension.undertow.security.jacc.JACCContextIdHandler.handleRequest(JACCContextIdHandler.java:61) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.server.handlers.PredicateHandler.handleRequest(PredicateHandler.java:43) at io.undertow.servlet.handlers.ServletInitialHandler.handleFirstRequest(ServletInitialHandler.java:284) at io.undertow.servlet.handlers.ServletInitialHandler.dispatchRequest(ServletInitialHandler.java:263) at io.undertow.servlet.handlers.ServletInitialHandler.access$000(ServletInitialHandler.java:81) at io.undertow.servlet.handlers.ServletInitialHandler$1.handleRequest(ServletInitialHandler.java:174) at io.undertow.server.Connectors.executeRootHandler(Connectors.java:202) at io.undertow.server.HttpServerExchange$1.run(HttpServerExchange.java:793) at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142) [rt.jar:1.8.0_102] at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617) [rt.jar:1.8.0_102] at java.lang.Thread.run(Thread.java:745) [rt.jar:1.8.0_102] ^C [root@hlg-rbs-ovirt01-poa ~]# When i try with virsh i have sucess. [root@hlg-rbs-ovirt-kvm01-poa ~]# virsh -c qemu+ssh:// root(a)prd-openshift-kvm03-poa.rbs.com.br/system The authenticity of host 'prd-openshift-kvm03-poa.rbs.com.br (10.1.8.32)' can't be established. ECDSA key fingerprint is af:e9:12:29:65:ad:41:ab:0a:3c:a1:f0:73:1c:62:a5. Are you sure you want to continue connecting (yes/no)? yes root(a)prd-openshift-kvm03-poa.rbs.com.br's password: Welcome to virsh, the virtualization interactive terminal. Type: 'help' for help with commands 'quit' to quit virsh # list Id Name State ---------------------------------------------------- 5 prd-openshift-etcd03-poa running 6 prd-openshift-master03-poa running 8 prd-openshift-node03-poa running virsh # list --all Id Name State ---------------------------------------------------- 5 prd-openshift-etcd03-poa running 6 prd-openshift-master03-poa running 8 prd-openshift-node03-poa running - teste shut off - teste1 shut off - tpl-centos72-64 shut off virsh # quit [root@hlg-rbs-ovirt-kvm01-poa ~]# Thanks.

3 2

Change host names/IPs
by Davide Ferrari 15 May '19

15 May '19

Hello Is there a clean way and possibly without downtime to change the hostname and IP addresses of all the hosts in a running oVirt cluster? -- Davide Ferrari Senior Systems Engineer

4 7

[Users] Lifecycle / upgradepath
by Sven Kieske 11 May '19

11 May '19

Hi Community, Currently, there is no single document describing supported (which means: working ) upgrade scenarios. I think the project has matured enough, to have such an supported upgradepath, which should be considered in the development of new releases. As far as I know, currently it is supported to upgrade from x.y.z to x.y.z+1 and from x.y.z to x.y+1.z but not from x.y-1.z to x.y+1.z directly. maybe this should be put together in a wiki page at least. also it would be cool to know how long a single "release" would be supported. In this context I would define a release as a version bump from x.y.z to x.y+1.z or to x+1.y.z a bump in z would be a bugfix release. The question is, how long will we get bugfix releases for a given version? What are your thoughts? -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH & Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen

2 1

[Users] Nested virtualization with Opteron 2nd generation and oVirt 3.1 possible?
by Gianluca Cecchi 11 May '19

11 May '19

Hello, I have 2 physical servers with Opteron 2nd gen cpu. There is CentOS 6.3 installed and some VM already configured on them. Their /proc/cpuinfo contains ... model name : Dual-Core AMD Opteron(tm) Processor 8222 ... kvm_amd kernel module is loaded with its default enabled nested option # systool -m kvm_amd -v Module = "kvm_amd" Attributes: initstate = "live" refcnt = "15" srcversion = "43D8067144E7D8B0D53D46E" Parameters: nested = "1" npt = "1" ... I already configured a fedora 17 VM as a oVirt 3.1 Engine I'm trying to configure another VM as oVirt 3.1 node with ovirt-node-iso-2.5.5-0.1.fc17.iso It seems I'm not able to configure so that ovirt install doesn't complain. After some attempts, I tried this in my vm.xml for the cpu: <cpu mode='custom' match='exact'> <model fallback='allow'>athlon</model> <vendor>AMD</vendor> <feature policy='require' name='pni'/> <feature policy='require' name='rdtscp'/> <feature policy='force' name='svm'/> <feature policy='require' name='clflush'/> <feature policy='require' name='syscall'/> <feature policy='require' name='lm'/> <feature policy='require' name='cr8legacy'/> <feature policy='require' name='ht'/> <feature policy='require' name='lahf_lm'/> <feature policy='require' name='fxsr_opt'/> <feature policy='require' name='cx16'/> <feature policy='require' name='extapic'/> <feature policy='require' name='mca'/> <feature policy='require' name='cmp_legacy'/> </cpu> Inside node /proc/cpuinfo becomes processor : 3 vendor_id : AuthenticAMD cpu family : 6 model : 2 model name : QEMU Virtual CPU version 0.12.1 stepping : 3 microcode : 0x1000065 cpu MHz : 3013.706 cache size : 512 KB fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall mmxext fxsr_opt lm nopl pni cx16 hypervisor lahf_lm cmp_legacy cr8_legacy bogomips : 6027.41 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: 2 questions: 1) Is there any combination in xml file to give to my VM so that oVirt doesn't complain about missing hardware virtualization with this processor? 2) suppose 1) is not possible in my case and I still want to test the interface and try some config operations to see for example the differences with RHEV 3.0, how can I do? At the moment this complaint about hw virtualization prevents me to activate the node. I get Installing Host f17ovn01. Step: RHEV_INSTALL. Host f17ovn01 was successfully approved. Host f17ovn01 running without virtualization hardware acceleration Detected new Host f17ovn01. Host state was set to Non Operational. Host f17ovn01 moved to Non-Operational state. Host f17ovn01 moved to Non-Operational state as host does not meet the cluster's minimum CPU level. Missing CPU features : CpuFlags Can I lower the requirements to be able to operate without hw virtualization in 3.1? Thanks in advance, Gianluca

2 1

Need VM run once api
by Chandrahasa S 09 May '19

09 May '19

This is a multipart message in MIME format. --=_alternative 00361B2065257E90_= Content-Type: text/plain; charset="US-ASCII" Hi Experts, We are integrating ovirt with our internal cloud. Here we installed cloudinit in vm and then converted vm to template. We deploy template with initial run parameter Hostname, IP Address, Gateway and DNS. but when we power ON initial, run parameter is not getting pushed to inside the vm. But its working when we power on VM using run once option on Ovirt portal. I believe we need to power ON vm using run once API, but we are not able get this API. Can some one help on this. I got reply on this query last time but unfortunately mail got deleted. Thanks & Regards Chandrahasa S =====-----=====-----===== Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you --=_alternative 00361B2065257E90_= Content-Type: text/html; charset="US-ASCII" <font size=2 face="sans-serif">Hi Experts,</font> <br> <br><font size=2 face="sans-serif">We are integrating ovirt with our internal cloud.</font> <br> <br><font size=2 face="sans-serif">Here we installed cloudinit in vm and then converted vm to template. We deploy template with initial run parameter Hostname, IP Address, Gateway and DNS.</font> <br> <br><font size=2 face="sans-serif">but when we power ON initial, run parameter is not getting pushed to inside the vm. But its working when we power on VM using run once option on Ovirt portal.</font> <br> <br><font size=2 face="sans-serif">I believe we need to power ON vm using run once API, but we are not able get this API.</font> <br> <br><font size=2 face="sans-serif">Can some one help on this.</font> <br> <br><font size=2 face="sans-serif">I got reply on this query last time but unfortunately mail got deleted.</font> <br> <br><font size=2 face="sans-serif">Thanks & Regards<br> Chandrahasa S<br> </font><p>=====-----=====-----=====<br> Notice: The information contained in this e-mail<br> message and/or attachments to it may contain <br> confidential or privileged information. If you are <br> not the intended recipient, any dissemination, use, <br> review, distribution, printing or copying of the <br> information contained in this e-mail message <br> and/or attachments to it are strictly prohibited. If <br> you have received this communication in error, <br> please notify us by reply e-mail or telephone and <br> immediately and permanently delete the message <br> and any attachments. Thank you</p> <p></p> --=_alternative 00361B2065257E90_=--

5 4

[Users] importing from kvm into ovirt
by Jonathan Horne 29 Apr '19

29 Apr '19

--_000_9BE6F493F83A594DA60C45E6A09DC5AC016BA694AUSP01DAG0201co_ Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable I need to import a kvm virtual machine from a standalone kvm into my ovirt = cluster. Standalone is using local storage, and my ovirt cluster is using = iscsi. Can i please have some advice on whats the best way to get this sys= tem into ovirt? Right now i see it as copying the .img file to somewhere=85 but i have no i= dea where to start. I found this directory on one of my ovirt nodes: /rhev/data-center/mnt/blockSD/fe633237-14b2-4f8b-aedd-bbf753bcafaf/master/v= ms But inside is just directories that appear to have uuid-type of names, and = i can't tell what belongs to which vm. Any advice would be greatly appreciated. Thanks, jonathan ________________________________ This is a PRIVATE message. If you are not the intended recipient, please de= lete without copying and kindly advise us by e-mail of the mistake in deliv= ery. NOTE: Regardless of content, this e-mail shall not operate to bind SKO= POS to any order or other contract unless pursuant to explicit written agre= ement or government initiative expressly permitting the use of e-mail for s= uch purpose. --_000_9BE6F493F83A594DA60C45E6A09DC5AC016BA694AUSP01DAG0201co_ Content-Type: text/html; charset="Windows-1252" Content-ID: <41FAB2B157C43549B6577A3495BA255C(a)collaborationhost.net> Content-Transfer-Encoding: quoted-printable <html> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3DWindows-1= 252"> </head> <body style=3D"word-wrap:break-word; color:rgb(0,0,0); font-size:14px; font= -family:Calibri,sans-serif"> <div> <div> <div>I need to import a kvm virtual machine from a standalone kvm into my o= virt cluster.  Standalone is using local storage, and my ovirt cluster= is using iscsi.  Can i please have some advice on whats the best way = to get this system into ovirt?</div> </div> </div> <div><br> </div> <div>Right now i see it as copying the .img file to somewhere=85 but i have= no idea where to start.  I found this directory on one of my ovirt no= des:</div> <div><br> </div> <div>/rhev/data-center/mnt/blockSD/fe633237-14b2-4f8b-aedd-bbf753bcafaf/mas= ter/vms</div> <div><br> </div> <div>But inside is just directories that appear to have uuid-type of names,= and i can't tell what belongs to which vm.</div> <div><br> </div> <div>Any advice would be greatly appreciated.</div> <div><br> </div> <div>Thanks,</div> <div>jonathan</div> <br> <hr> <font color=3D"Gray" face=3D"Arial" size=3D"1">This is a PRIVATE message. I= f you are not the intended recipient, please delete without copying and kin= dly advise us by e-mail of the mistake in delivery. NOTE: Regardless of con= tent, this e-mail shall not operate to bind SKOPOS to any order or other contract unless pursuant to explicit wri= tten agreement or government initiative expressly permitting the use of e-m= ail for such purpose.</font> </body> </html> --_000_9BE6F493F83A594DA60C45E6A09DC5AC016BA694AUSP01DAG0201co_--

3 2

Trying to reset password for ovirt wiki
by noc 08 Apr '19

08 Apr '19

This is a multi-part message in MIME format. --------------000005070002050708050606 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hoping someone can help me out. For some reason I keep getting the following error when I try to reset my password: Reset password * Error sending mail: Failed to add recipient: jvandewege(a)nieuwland.nl [SMTP: Invalid response code received from server (code: 554, response: 5.7.1 <jvandewege(a)nieuwland.nl>: Relay access denied)] Complete this form to receive an e-mail reminder of your account details. Since I receive the ML on this address it is definitely a working address. Tried my home account too and same error but then for my home provider, Relay denied ?? A puzzled user, Joop --------------000005070002050708050606 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body bgcolor="#FFFFFF" text="#000000"> Hoping someone can help me out.<br> For some reason I keep getting the following error when I try to reset my password:<br> <br> <fieldset><legend>Reset password</legend> <div class="error"> <ul> <li>Error sending mail: Failed to add recipient: <a class="moz-txt-link-abbreviated" href="mailto:jvandewege@nieuwland.nl">jvandewege(a)nieuwland.nl</a> [SMTP: Invalid response code received from server (code: 554, response: 5.7.1 <a class="moz-txt-link-rfc2396E" href="mailto:jvandewege@nieuwland.nl"><jvandewege(a)nieuwland.nl></a>: Relay access denied)]</li> </ul> </div> <p>Complete this form to receive an e-mail reminder of your account details.<br> </p> </fieldset> <br> Since I receive the ML on this address it is definitely a working address.<br> Tried my home account too and same error but then for my home provider, Relay denied ??<br> <br> A puzzled user,<br> <br> Joop<br> <br> </body> </html> --------------000005070002050708050606--

2 1

ovirt-guest-agent issue on rhel5.5
by John Michael Mercado 08 Apr '19

08 Apr '19

Hi All, I need your help. Anyone who encounter the below error and have the solution? Can you help me how to fix this? MainThread::INFO::2015-01-27 10:22:53,247::ovirt-guest-agent::57::root::Starting oVirt guest agent MainThread::ERROR::2015-01-27 10:22:53,248::ovirt-guest-agent::138::root::Unhandled exception in oVirt guest agent! Traceback (most recent call last): File "/usr/share/ovirt-guest-agent/ovirt-guest-agent.py", line 132, in ? agent.run(daemon, pidfile) File "/usr/share/ovirt-guest-agent/ovirt-guest-agent.py", line 63, in run self.agent = LinuxVdsAgent(config) File "/usr/share/ovirt-guest-agent/GuestAgentLinux2.py", line 371, in __init__ AgentLogicBase.__init__(self, config) File "/usr/share/ovirt-guest-agent/OVirtAgentLogic.py", line 171, in __init__ self.vio = VirtIoChannel(config.get("virtio", "device")) File "/usr/share/ovirt-guest-agent/VirtIoChannel.py", line 150, in __init__ self._stream = VirtIoStream(vport_name) File "/usr/share/ovirt-guest-agent/VirtIoChannel.py", line 131, in __init__ self._vport = os.open(vport_name, os.O_RDWR) OSError: [Errno 2] No such file or directory: '/dev/virtio-ports/com.redhat.rhevm.vdsm' Thanks

2 1

[Users] oVirt Workshop at LinuxCon Japan 2012
by Leslie Hawthorn 08 Apr '19

08 Apr '19

Hello everyone, As part of our efforts to raise awareness of and educate more developers about the oVirt project, we will be holding an oVirt workshop at LinuxCon Japan, taking place on June 8, 2012. You can find full details of the workshop agenda on the LinuxCon Japan site. [0] Registration for the workshop is now open and is free of charge for the first 50 participants. We will also look at adding additional participant slots to the workshop based on demand. Attendees who register for LinuxCon Japan via the workshop registration link [1] will also be eligible for a discount on their LinuxCon Japan registration. Please spread the word to folks you think would find the workshop useful. If they have already registered for LinuxCon Japan, they can simply edit their existing registration to include the workshop. [0] - https://events.linuxfoundation.org/events/linuxcon-japan/ovirt-gluster-work… [1] - http://www.regonline.com/Register/Checkin.aspx?EventID=1099949 Cheers, LH -- Leslie Hawthorn Community Action and Impact Open Source and Standards @ Red Hat identi.ca/lh twitter.com/lhawthorn

2 1

[Users] Moving iSCSI Master Data
by rni＠chef.net 07 Apr '19

07 Apr '19

--========GMXBoundary282021374122634158505 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit Hi, it's me again.... I started my oVirt 'project' as a proof of concept,.. but it happend as always, it became production Now, I've to move the iSCSI Master data to the real iSCSI traget. Is there any way to do this, and to become rid of the old Master Data? Thank you for your help Hans-Joachim --========GMXBoundary282021374122634158505 Content-Type: text/html; charset="utf-8" Content-Transfer-Encoding: quoted-printable <span style=3D'font-family:Verdana'><span style=3D'font-size:12px'>Hi,<br /= ><br />it's me again....<br /><br />I started my oVirt 'project' as a proof= of concept,.. but it happend as always, it became production <img alt= =3D" " title=3D" " src=3D"http://images.gmx.com/images/outsource/applicatio= n/mailclient/mailcom/resource/mailclient/icons/blue/emoticons/animated/S_02= -516742918.gif" /><br /><br />Now, I've to move the iSCSI Master data to th= e real iSCSI traget.<br />Is there any way to do this, and to become rid of= the old Master Data?<br /><br /><span id=3D"editor_signature">Thank you fo= r your help</span><br /><br />Hans-Joachim</span></span> --========GMXBoundary282021374122634158505--

3 2

[Users] Can't access RHEV-H aka ovirt-node
by Scotto Alberto 11 Mar '19

11 Mar '19

--_004_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_ Content-Type: multipart/alternative; boundary="_000_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_" --_000_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hi all, I can't login to the hypervisor, neither as root nor as admin, neither from= another computer via ssh nor directly on the machine. I'm sure I remember the passwords. This is not the first time it happens: l= ast time I reinstalled the host. Everything worked ok for about 2 weeks, an= d then... What's going on? Is it a known behavior, somehow? Before rebooting the hypervisor, I would like to try something. RHEV Manage= r talks to RHEV-H without any problems. Can I login with RHEV-M's keys? how= ? Thank you all. Alberto Scotto [Blue] Via Cardinal Massaia, 83 10147 - Torino - ITALY phone: +39 011 29100 al.scotto(a)reply.it www.reply.it ________________________________ -- The information transmitted is intended for the person or entity to which i= t is addressed and may contain confidential and/or privileged material. Any= review, retransmission, dissemination or other use of, or taking of any ac= tion in reliance upon, this information by persons or entities other than t= he intended recipient is prohibited. If you received this in error, please = contact the sender and delete the material from any computer. --_000_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html> <head> <meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dus-ascii"= > <style>  </style> </head> <body lang=3D"IT" link=3D"blue" vlink=3D"purple"> <div class=3D"WordSection1"> <p class=3D"MsoNormal"><span lang=3D"EN-US">Hi all,</span></p> <p class=3D"MsoNormal"><span lang=3D"EN-US">I can’t login to the hype= rvisor, neither as root nor as admin, neither from another computer via ssh= nor directly on the machine.</span></p> <p class=3D"MsoNormal"><span lang=3D"EN-US">I’m sure I remember the p= asswords. This is not the first time it happens: last time I reinstalled th= e host. Everything worked ok for about 2 weeks, and then...</span></p> <p class=3D"MsoNormal"><span lang=3D"EN-US">What’s going on? Is it a = known behavior, somehow?</span></p> <p class=3D"MsoNormal"><span lang=3D"EN-US">Before rebooting the hypervisor= , I would like to try something. RHEV Manager talks to RHEV-H without any p= roblems. Can I login with RHEV-M’s keys? how?</span></p> <p class=3D"MsoNormal"><span lang=3D"EN-US"> </span></p> <p class=3D"MsoNormal"><span lang=3D"EN-US">Thank you all.</span></p> </div> <br> <br> <div align=3D"left"> <p style=3D"font-family:Calibri,Sans-Serif; font-size:10pt"><span style=3D"= color:#000000; font-weight:bold">Alberto Scotto</span> <span style=3D"color:#808080"></span><br> <br> <span style=3D"color:#000000"><img border=3D"0" alt=3D"Blue" src=3D"cid:bde= 5ac62d10545908e269a6006dbd5ac" style=3D"margin:0px"> </span><br> <span style=3D"color:#808080">Via Cardinal Massaia, 83<br> 10147 - Torino - ITALY <br> phone: +39 011 29100 <br> <a href=3D"al.scotto(a)reply.it" target=3D"" style=3D"color:blue; text-decora= tion:underline">al.scotto(a)reply.it</a> <br> <a title=3D"" href=3D"www.reply.it" target=3D"" style=3D"color:blue; text-d= ecoration:underline">www.reply.it</a> </span><br>  </p> </div> <br> <hr> <font face=3D"Arial" color=3D"Gray" size=3D"1"><br> --<br> The information transmitted is intended for the person or entity to which i= t is addressed and may contain confidential and/or privileged material. Any= review, retransmission, dissemination or other use of, or taking of any ac= tion in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If= you received this in error, please contact the sender and delete the mater= ial from any computer.<br> </font> </body> </html> --_000_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_-- --_004_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_ Content-Type: image/png; name="blue.png" Content-Description: blue.png Content-Disposition: inline; filename="blue.png"; size=2834; creation-date="Tue, 11 Sep 2012 14:14:44 GMT"; modification-date="Tue, 11 Sep 2012 14:14:44 GMT" Content-ID: <bde5ac62d10545908e269a6006dbd5ac> Content-Transfer-Encoding: base64 iVBORw0KGgoAAAANSUhEUgAAAIwAAAAyCAYAAACOADM7AAAABmJLR0QA/gD+AP7rGNSCAAAACXBI WXMAAA3XAAAN1wFCKJt4AAAACXZwQWcAAACMAAAAMgCR0D3bAAAKaUlEQVR42u2ce5AUxRnAf313 3Al4eCAYFaIgyMNEUF6KlYoVIDBArDxqopWxQgViQlWsPHA0MUlZVoyKRsdSE4lGomjIaHS0UlHL wTIPpEgQFQUUjYIWdfIIScyBHi/Z6/zRM1xP3yzs7t3unOX8qra2H9M9vb3f9Pf19/WukFKSk1Mq dVkPIOejRS4wOWXR6wVGuP5I4foDsh5HjkL0VhtGuP5A4CFgNrAD+Lb0nKeyHtfHnd68wixGCQvA qcA9wvWPy3pQH3caan1D4fonAYeBDwEZjaFflAaok56zHRhsNG0B+gAHSrhHarn0nFp/3NLnxbKP B06I5kECO2UYZD2sLtRcYIBJwK+BoYBACU89cAjoAIRw/TuAJcClQGy//FJ6zvvH6ly4/qXAz4vU HQA2A4H0nIcz+OxH41eAHaU3AhdkPaA0MrFhhOuPB2YA5wBnA6ehni5dgKcBu4C5wLZS7Rfh+g8A 80u49HHgEuk5h2s+AeaYLbsO2AKMiIqWyzBYkPW40shihUF6zkbUUwSAcP0G4FHgS9pl10rPmQMs LbXfSBVNLPHyrwDfBO7JYg4MRqEempjnsh5QMXqL0Xsl8EUt3w5cXUE/w4AztfzzwGSUGrwoyuvM yfqDR5yLUssxL2U9oGJkssLoCNdfjLJXdBZIz9lQQXcTgSYt/4z0nHjy1wvX3wW8oNX3O8q4TgKm AGegjNB/As9JzzmYer1lTwKGoOyyV2UYtArLngLMQ9lh64EVRQxZ3V5pje4V9zsVGBRl22QYrDXu e0HUvwD+K8NgXbe/lKOQqcAI178MuM0ovk16zqMVdjnNyL9g5E2DrTVlTP1RRvM3gIFG9RvC9RdK z/lHoo2yQQJgeFR0hbDsT6FUns544Icp456qpV+RYaAL5RJgepR+FWXzxfcdA6zRrr0SqKrAZKaS hOt/DbjXKH5Geo7bjW71iT8AvGLUzzXyfzfGNBBlPyymq7AAjAWeFK5/slE+AvhklC4At6KEZb9x 3cJo+9x5T8s+ERinFa012uzU0vuMuu9r6W3AXd2Yu5LIRGCE618E/D6l6rpu9Hk8MEEr2iQ9p1Wr n4wShJgPgCeMbh6g02jeB9wILASe1q4ZBHzBaDeRThukHghRdskoQF+NmlH+JJ0JqB1ijCkw72np jiOfx7JPQrkdYm6QYXBMH1V3qYlKEq7fhNLvw1CTeztK55rcJlz/s8XshGPwaeBELd8sXP961Bd4 Bsqo1u2bm6Tn7NbGeCHKMI6ZLz3nsajuT6gtfjxfpxr31lXhThkG8470a9mrtPp2uq4652np94FN Rr0uMM1a+jI6fVTvAMsrmLOy6VGBEa5fB3wOpctHaK9TgVOAxmN0MRXlwPpWBbefYuTHAj8tcu39 0nNuMMq+qqXfjoUl4mSSq/HbRlv9S3/ZqBumpXcB/zPqz9fSm2UY/Nuo1wWmCUBYdiPwHa3ck2Hw YQVzVjbVWGFmkW7YmewDfga8CNwHnB6VXyZcf7X0nAfLvG8pntE3gSXSc5an1Olf+hDh+i+jVieJ UiOxwBSiMQMgLLsFOEtr+7xWB8rQjdkgw0BXK40o1RWTZrDu0dKx0X4xylMOynZZVuZcVUyPCoz0 nA7gR8L1N6FWmQIqZtRGpwoSwF7gRek5WwCE658P3A9Y0TV3C9ffUOrWOlrZdIfdXuBhlCqaqZU/ myYs0RZaNzybUV7oNFqBt7T8BJJ2iW6zDAPGFKkDGE1yBTLtF0gKTCF6/4FWtsTYVVWVqtgw0nNW lHn9LmCOcP2bgKuAvsAtqNWqFGLVF7NGes4i4fpjgNfpFNbzi7QfD/TX8vtQMa40VkvPKWh5fWfW DuhCfg5Ju8nc5k/RxpZYuTR0gWkTlj0D5YgEeJca2S4xvcXTC4D0nKvpdNWXc2hqEiqSHROrhR0k bYAzhesPTmmvG61tKAE6PXoNRRnTg6OX6VvRhfB1GQa7tbyu5v6D8qNQpH4bsDVlbLrADACu0fK/ qOXqAr1MYCLip7AcI+48I78WIIpuv6mVN5NUPWntN0nP2So9p016ThtwEKU6RpIMOyAsuw9JVWiu INO19AYZBma0fbKWXi/DoEBX9tBpu4wDLozS2+jqx6o6vVFgYt+JKKON/pTvJ6kWzKc6LTg5XEtv MeruAF5DqbZVgH6IayTJoOHf4oSw7LNICuKTeqfCsj9BUnhN+yamPXqZc3JrLfwuJpnHklKIBaa+ lIuF67eQ3KW8HtlEMabhPCmlG/3JnhX5ZHaifDeLtLqlxpmcySQfuvnCstdH6WXaZ9iPMsJ1xpOM ZaXZL6DsqfcB3UO8A7WzrDm9T2DqG7dTOHSIEgUGIc5GyhatZJ1Rv4HkmZ/xKb08o5UPRa0UkuQT vY6uQVJTFc5D7fQ6SNpUN8ow2GVcq7sB2ugq2DGHUYfLdG6SYbCPDMhcYIRlJwWjcGg/Z1/yATBE zJxXT0Pf4o0P7pWcO39W4nuVHS+JGfPq6dMXOjpgzNyt9En0MUF877fDee3x1iPlo2beTOPxnwGh qzahuhUAjwCLpOeYKkDfIT2BUl1XkxT2+2QYXJ8yen0H+JYMgz2kY9o126mh38UkITBRYGwp5e1Q usNjwL/Ql3VRX2D35mUI0UB90wyOZmc19i+wa+NB+vTrnMA9re00RO3q6iRbVtYxeOzt1NXHS3od e96dRkPT6CN9v/HUIRr738Dg0bMRDSdQVzeAjsJh+ra8SfMpf5S3XNzFoSYsewhJVbhKhoEnLDtE HV4vRGXPprQFFTdrRklk2u4opoVkyMOTYbCfjEgc0RSWPQhlQ/SruMfymCrD4IXud1N7In+ILgzT ZRj8tYfvcSLwOzoPer0DjKv1VlrHVEltqBhMafZD99mR1QfvAXT1tYfiNkhZCMvuD1yLCtbORsXg Yi7PUljAEJgoztFaYV8fN8yg4XsV95TkLJS32+QaGQZPl9tZT5O50ftRJLL1Pq8V9cjqEjHdyG8D rpdhkJmhq5MLTGX0QR2diLdnYQ/2vRq1wsRe6nUyDNq712XP0Wt/W53TO+mNoYGcXkwuMDll0eM2 TPRbnGnAvaaDSVj2bOA0GQY1j7Lm9AzVWGG+jIrwphlH3wXuzvpD51RONXZJ7aizLFcIyx4O3CXD IN527kUdJAJAWPbFqBXnVmHZV6FO3K+I6oahzgYPAX7T017UnMqoxgpTQAniONRJ/AeFZRc72+IA P47SPwEWAAjLbgL+jPJ1NAF/EZZd6o/sc6pINQSmARAyDL6OOm45mmSoX+cDVDiC6D0+azI0arcS FSkG9fcgORlTbcfdXtR5jqOdnpPGO3QK8nzU33KsoutvgXIyoBorjP7FN6OEsph3sE6rq9fS8RmQ RTIMTgP+QPJsbk5GVENgjgMQlv0QcDnwBp0nxgaQ/O+6dmCUsOxHUGdj459kbI/a3Sksew3qjE5L 1pOVUx2VtBJljxxAhf3v0v4TZRnKmI25ObruLdTZkvcAZBgcEpY9E3BRu6TrZBisznqycvJYUk6Z 5KGBnLLIBSanLHKBySmLXGByyiIXmJyy+D/P9uGVPOu6DAAAACh6VFh0U29mdHdhcmUAAHja801M LsrPTU3JTFRwyyxKLc8vyi5WsAAAYBUIJ4KDNosAAAAASUVORK5CYII= --_004_C8B8517ADA90DB40A482797D59EB83896419FE83CED01MBXS08repl_--

3 2

Unable to make Single Sign on working on Windows 7 Guest
by Felipe Herrera Martinez 11 Mar '19

11 Mar '19

On the case I'll be able to create an installer, what is the name of the Application need to be there, in order to ovirt detects that Ovirt Guest agent is installed? I have created an installer adding OvirtGuestService files and the Product Name to be shown, a part of the command line post installs.. I have tried with "ovirt-guest-agent" and "Ovirt guest agent" Names for the application installed on Windows 7 guest and even both are presented on ovirt VM Applications tab, on any case LogonVDScommand appears. There is other option to make it work now? Thanks in advance, Felipe

3 5

Re: [ovirt-users] Need VM run once api
by Chandrahasa S 11 Mar '19

11 Mar '19

This is a multipart message in MIME format. --=_alternative 00199D2865257E91_= Content-Type: text/plain; charset="US-ASCII" Can any one help on this. Thanks & Regards Chandrahasa S From: Chandrahasa S/MUM/TCS To: users(a)ovirt.org Date: 28-07-2015 15:20 Subject: Need VM run once api Hi Experts, We are integrating ovirt with our internal cloud. Here we installed cloudinit in vm and then converted vm to template. We deploy template with initial run parameter Hostname, IP Address, Gateway and DNS. but when we power ON initial, run parameter is not getting pushed to inside the vm. But its working when we power on VM using run once option on Ovirt portal. I believe we need to power ON vm using run once API, but we are not able get this API. Can some one help on this. I got reply on this query last time but unfortunately mail got deleted. Thanks & Regards Chandrahasa S =====-----=====-----===== Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you --=_alternative 00199D2865257E91_= Content-Type: text/html; charset="US-ASCII" <font size=2 face="sans-serif">Can any one help on this.</font> <br> <br><font size=2 face="sans-serif">Thanks & Regards<br> Chandrahasa S<br> </font> <br> <br> <br> <br><font size=1 color=#5f5f5f face="sans-serif">From:        </font><font size=1 face="sans-serif">Chandrahasa S/MUM/TCS</font> <br><font size=1 color=#5f5f5f face="sans-serif">To:        </font><font size=1 face="sans-serif">users(a)ovirt.org</font> <br><font size=1 color=#5f5f5f face="sans-serif">Date:        </font><font size=1 face="sans-serif">28-07-2015 15:20</font> <br><font size=1 color=#5f5f5f face="sans-serif">Subject:        </font><font size=1 face="sans-serif">Need VM run once api</font> <br> <hr noshade> <br> <br><font size=2 face="sans-serif">Hi Experts,</font> <br> <br><font size=2 face="sans-serif">We are integrating ovirt with our internal cloud.</font> <br> <br><font size=2 face="sans-serif">Here we installed cloudinit in vm and then converted vm to template. We deploy template with initial run parameter Hostname, IP Address, Gateway and DNS.</font> <br> <br><font size=2 face="sans-serif">but when we power ON initial, run parameter is not getting pushed to inside the vm. But its working when we power on VM using run once option on Ovirt portal.</font> <br> <br><font size=2 face="sans-serif">I believe we need to power ON vm using run once API, but we are not able get this API.</font> <br> <br><font size=2 face="sans-serif">Can some one help on this.</font> <br> <br><font size=2 face="sans-serif">I got reply on this query last time but unfortunately mail got deleted.</font> <br> <br><font size=2 face="sans-serif">Thanks & Regards<br> Chandrahasa S<br> </font> <br><p>=====-----=====-----=====<br> Notice: The information contained in this e-mail<br> message and/or attachments to it may contain <br> confidential or privileged information. If you are <br> not the intended recipient, any dissemination, use, <br> review, distribution, printing or copying of the <br> information contained in this e-mail message <br> and/or attachments to it are strictly prohibited. If <br> you have received this communication in error, <br> please notify us by reply e-mail or telephone and <br> immediately and permanently delete the message <br> and any attachments. Thank you</p> <p></p> --=_alternative 00199D2865257E91_=--

3 3

Re: [ovirt-users] Problem Windows guests start in pause
by Dafna Ron 11 Mar '19

11 Mar '19

Hi Lucas, Please send mails to the list next time. can you please do rpm -qa |grep qemu. also, can you try a different windows image? Thanks, Dafna On 07/14/2014 02:03 PM, lucas castro wrote: > On the host there I've tried to run the vm, I use a centOS 6.5 > and checked, no update for qemu, libvirt or related package. -- Dafna Ron

3 3

Feature: Hosted engine VM management
by Roy Golan 27 Feb '19

27 Feb '19

Hi all, Upcoming in 3.6 is enhancement for managing the hosted engine VM. In short, we want to: * Allow editing the Hosted engine VM, storage domain, disks, networks etc * Have a shared configuration for the hosted engine VM * Have a backup for the hosted engine VM configuration please review and comment on the wiki below: http://www.ovirt.org/Hosted_engine_VM_management Thanks, Roy

2 3

Re: [ovirt-users] Large DWH Database, how to empty
by Matt . 26 Feb '19

26 Feb '19

Hi, OK thanks! I saw that after upgrading to 4.0.5 from 4.0.4 the DB already dropped with around 500MB directly and is now at 2GB smaller. Does this sounds familiar to you with other settings in 4.0.5 ? Thanks, Matt 2017-01-08 10:45 GMT+01:00 Shirly Radco <sradco(a)redhat.com>: > No. That will corrupt your database. > > Are you using the full dwh or the smaller version for the dashboards? > > Please set the delete thresholds to save less data and the data older then > the time you set will be deleted. > Add a file to /ovirt-engine-dwhd.conf.d/ > update_time_to_keep_records.conf > > Add these lines with the new configurations. The numbers represent the hours > to keep the data. > > DWH_TABLES_KEEP_SAMPLES=24 > DWH_TABLES_KEEP_HOURLY=1440 > DWH_TABLES_KEEP_DAILY=43800 > > > These are the configurations for a full dwh. > > The smaller version configurations are: > DWH_TABLES_KEEP_SAMPLES=24 > DWH_TABLES_KEEP_HOURLY=720 > DWH_TABLES_KEEP_DAILY=0 > > The delete process by default at 3am every day (DWH_DELETE_JOB_HOUR=3) > > Best regards, > > Shirly Radco > > BI Software Engineer > Red Hat Israel Ltd. > 34 Jerusalem Road > Building A, 4th floor > Ra'anana, Israel 4350109 > > > On Fri, Jan 6, 2017 at 6:35 PM, Matt . <yamakasi.014(a)gmail.com> wrote: >> >> Hi, >> >> I seem to have some large database for the DWH logging and I wonder >> how I can empty it safely. >> >> Can I just simply empty the database ? >> >> Have a good weekend! >> >> Cheers, >> >> Matt >> _______________________________________________ >> Users mailing list >> Users(a)ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users > >

1 0

Re: [ovirt-users] Packet loss
by Doron Fediuck 26 Feb '19

26 Feb '19

----_com.android.email_640187878761650 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: base64 SGkgS3lsZSzCoApXZSBtYXkgaGF2ZSBzZWVuIHNvbWV0aGluZyBzaW1pbGFyIGluIHRoZSBwYXN0 IGJ1dCBJIHRoaW5rIHRoZXJlIHdlcmUgdmxhbnMgaW52b2x2ZWQuwqAKSXMgaXQgdGhlIHNhbWUg Zm9yIHlvdT/CoApUb255IC8gRGFuLCBkb2VzIGl0IHJpbmcgYSBiZWxsP8Kg ----_com.android.email_640187878761650 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: base64 PGh0bWw+PGhlYWQ+PG1ldGEgaHR0cC1lcXVpdj0iQ29udGVudC1UeXBlIiBjb250ZW50PSJ0ZXh0 L2h0bWw7IGNoYXJzZXQ9VVRGLTgiPjwvaGVhZD48Ym9keSA+PGRpdj5IaSBLeWxlLCZuYnNwOzwv ZGl2PjxkaXY+V2UgbWF5IGhhdmUgc2VlbiBzb21ldGhpbmcgc2ltaWxhciBpbiB0aGUgcGFzdCBi dXQgSSB0aGluayB0aGVyZSB3ZXJlIHZsYW5zIGludm9sdmVkLiZuYnNwOzwvZGl2PjxkaXY+SXMg aXQgdGhlIHNhbWUgZm9yIHlvdT8mbmJzcDs8L2Rpdj48ZGl2PlRvbnkgLyBEYW4sIGRvZXMgaXQg cmluZyBhIGJlbGw/Jm5ic3A7PC9kaXY+PC9ib2R5PjwvaHRtbD4= ----_com.android.email_640187878761650--

2 1

Unable to backend oVirt with Cinder
by Logan Kuhn 21 Jun '18

21 Jun '18

------=_Part_51316288_608143832.1472587678781 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit I've got Cinder configured and pointed at Ceph for it's back end storage. I can run ceph commands on the cinder machine and cinder is configured for noauth and I've also tried it with Keystone for auth. I can run various cinder commands and it'll return as expected. When I configure it in oVirt it'll add the external provider fine, but when I go to create a disk it doesn't populate the volume type field, it's just empty. The corresponding command for cinder: cinder type-list and cinder type-show <name> returns fine and it is public. Ovirt and Cinder are on the same host so it isn't a firewall issue. Cinder config: [DEFAULT] rpc_backend = rabbit #auth_strategy = keystone auth_strategy = noauth enabled_backends = ceph #glance_api_servers = http://10.128.7.252:9292 #glance_api_version = 2 #[keystone_authtoken] #auth_uri = http://10.128.7.252:5000/v3 #auth_url = http://10.128.7.252:35357/v3 #auth_type = password #memcached_servers = localhost:11211 #project_domain_name = default #user_domain_name = default #project_name = services #username = user #password = pass [ceph] volume_driver = cinder.volume.drivers.rbd.RBDDriver volume_backend_name = ceph rbd_pool = ovirt-images rbd_user = cinder rbd_secret_uuid = <secret> rbd_ceph_conf = /etc/ceph/ceph.conf rbd_flatten_volume_from_snapshot = true rbd_max_clone_depth = 5 rbd_store_chunk_size = 4 rados_connect_timeout = -1 #glance_api_version = 2 [database] connection = postgresql://user:pass@10.128.2.33/cinder [oslo_concurrency] lock_path = /var/lib/cinder/tmp [oslo_messaging_rabbit] rabbit_host = localhost rabbit_port = 5672 rabbit_userid = user rabbit_password = pass Regards, Logan ------=_Part_51316288_608143832.1472587678781 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable <html><body><div style=3D"font-family: Arial; font-size: 12pt; color: #0000= 00"><div>I've got Cinder configured and pointed at Ceph for it's back end s= torage.  I can run ceph commands on the cinder machine and cinder is c= onfigured for noauth and I've also tried it with Keystone for auth.  I= can run various cinder commands and it'll return as expected. </= div><div><br data-mce-bogus=3D"1"></div><div>When I configure it in oVirt i= t'll add the external provider fine, but when I go to create a disk it does= n't populate the volume type field, it's just empty.  The correspondin= g command for cinder: cinder type-list and cinder type-show <name> re= turns fine and it is public. </div><div><br data-mce-bogus=3D"1"></div= ><div>Ovirt and Cinder are on the same host so it isn't a firewall issue.</= div><div><br data-mce-bogus=3D"1"></div><div>Cinder config:</div><div>[DEFA= ULT]<br>rpc_backend =3D rabbit<br>#auth_strategy =3D keystone<br>auth_strat= egy =3D noauth<br>enabled_backends =3D ceph<br>#glance_api_servers =3D http= ://10.128.7.252:9292<br>#glance_api_version =3D 2<br><br>#[keystone_authtok= en]<br>#auth_uri =3D http://10.128.7.252:5000/v3<br>#auth_url =3D http://10= .128.7.252:35357/v3<br>#auth_type =3D password<br>#memcached_servers =3D lo= calhost:11211<br>#project_domain_name =3D default<br>#user_domain_name =3D = default<br>#project_name =3D services<br>#username =3D user<br>#passwo= rd =3D pass<br><br>[ceph]<br>volume_driver =3D cinder.volume.drivers.rbd.RB= DDriver<br>volume_backend_name =3D ceph<br>rbd_pool =3D ovirt-images<br>rbd= _user =3D cinder<br>rbd_secret_uuid =3D <secret><br>rbd_ceph_con= f =3D /etc/ceph/ceph.conf<br>rbd_flatten_volume_from_snapshot =3D true<br>r= bd_max_clone_depth =3D 5<br>rbd_store_chunk_size =3D 4<br>rados_connect_tim= eout =3D -1<br>#glance_api_version =3D 2<br><br>[database]<br>connection = =3D postgresql://user:pass@10.128.2.33/cinder<br><br>[oslo_concurrency]<br>= lock_path =3D /var/lib/cinder/tmp<br><br>[oslo_messaging_rabbit]<br>rabbit_= host =3D localhost<br>rabbit_port =3D 5672<br>rabbit_userid =3D <span = style=3D"color: #000000; font-family: Arial; font-size: 16px; font-style: n= ormal; font-variant-ligatures: normal; font-variant-caps: normal; font-weig= ht: normal; letter-spacing: normal; line-height: normal; orphans: 2; text-a= lign: start; text-indent: 0px; text-transform: none; white-space: normal; w= idows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; display: inlin= e !important; float: none; background-color: #ffffff;" data-mce-style=3D"co= lor: #000000; font-family: Arial; font-size: 16px; font-style: normal; font= -variant-ligatures: normal; font-variant-caps: normal; font-weight: normal;= letter-spacing: normal; line-height: normal; orphans: 2; text-align: start= ; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; w= ord-spacing: 0px; -webkit-text-stroke-width: 0px; display: inline !importan= t; float: none; background-color: #ffffff;">user</span><br>rabbit_password = =3D <span style=3D"color: #000000; font-family: Arial; font-size: 16px= ; font-style: normal; font-variant-ligatures: normal; font-variant-caps: no= rmal; font-weight: normal; letter-spacing: normal; line-height: normal; orp= hans: 2; text-align: start; text-indent: 0px; text-transform: none; white-s= pace: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px;= display: inline !important; float: none; background-color: #ffffff;" data-= mce-style=3D"color: #000000; font-family: Arial; font-size: 16px; font-styl= e: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-= weight: normal; letter-spacing: normal; line-height: normal; orphans: 2; te= xt-align: start; text-indent: 0px; text-transform: none; white-space: norma= l; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; display: i= nline !important; float: none; background-color: #ffffff;">pass</span></div= ><div><br></div><div data-marker=3D"__SIG_PRE__">Regards,<br>Logan</div></d= iv></body></html> ------=_Part_51316288_608143832.1472587678781--

4 4

vdsClient is removed and replaced by vdsm-client
by Irit Goihman 16 Apr '18

16 Apr '18

Hi All, vdsClient will be removed from master branch today. It is using XMLRPC protocol which has been deprecated and replaced by JSON-RPC. A new client for vdsm was introduced in 4.1: vdsm-client. This is a simple client that uses JSON-RPC protocol which was introduced in ovirt 3.5. The client is not aware of the available methods and parameters, and you should consult the schema [1] in order to construct the desired command. Future version should parse the schema and provide online help. If you're using vdsClient, we will be happy to assist you in migrating to the new vdsm client. *vdsm-client usage:* vdsm-client [-h] [-a ADDRESS] [-p PORT] [--unsecure] [--timeout TIMEOUT] [-f FILE] namespace method [name=value [name=value] ...] Invoking simple methods: # vdsm-client Host getVMList ['b3f6fa00-b315-4ad4-8108-f73da817b5c5'] For invoking methods with many or complex parameters, you can read the parameters from a JSON format file: # vdsm-client Lease info -f lease.json where lease.json file content is: { "lease": { "sd_id": "75ab40e3-06b1-4a54-a825-2df7a40b93b2", "lease_id": "b3f6fa00-b315-4ad4-8108-f73da817b5c5" } } It is also possible to read parameters from standard input, creating complex parameters interactively: # cat <<EOF | vdsm-client Lease info -f - { "lease": { "sd_id": "75ab40e3-06b1-4a54-a825-2df7a40b93b2", "lease_id": "b3f6fa00-b315-4ad4-8108-f73da817b5c5" } } EOF *Constructing a command from vdsm schema:* Let's take VM.getStats as an example. This is the entry in the schema: VM.getStats: added: '3.1' description: Get statistics about a running virtual machine. params: - description: The UUID of the VM name: vmID type: *UUID return: description: An array containing a single VmStats record type: - *VmStats namespace: VM method name: getStats params: vmID The vdsm-client command is: # vdsm-client VM getStats vmID=b3f6fa00-b315-4ad4-8108-f73da817b5c5 *Invoking getVdsCaps command:* # vdsm-client Host getCapabilities Please consult vdsm-client help and man page for further details and options. [1] https://github.com/oVirt/vdsm/blob/master/lib/api/vdsm-api.yml -- Irit Goihman Software Engineer Red Hat Israel Ltd.

4 7

Passing VLAN trunk to VM
by Simon Vincent 26 Mar '18

26 Mar '18

Is it possible to pass multiple VLANs to a VM (pfSense) using a single virtual NIC? All my existing oVirt networks are setup as a single tagged VLAN. I know this didn't used to be supported but wondered if this has changed. My other option is to pass each VLAN as a separate NIC to the VM however if I needed to add a new VLAN I would have to add a new interface and reboot the VM as hot-add of NICs is not supported by pfSense.

6 14

HostedEngine with HA
by Carlos Rodrigues 22 Mar '18

22 Mar '18

Hello, I have one cluster with two hosts with power management correctly configured and one virtual machine with HostedEngine over shared storage with FiberChannel. When i shutdown the network of host with HostedEngine VM, it should be possible the HostedEngine VM migrate automatically to another host? What is the expected behaviour on this HA scenario? Regards, -- Carlos Rodrigues Engenheiro de Software Sénior Eurotux Informática, S.A. | www.eurotux.com (t) +351 253 680 300 (m) +351 911 926 110

4 30

Official Hyperconverged Gluster oVirt upgrade procedure?
by Hanson 23 Jan '18

23 Jan '18

Hi Guys, Just wondering if we have an updated manual or whats the current procedure for upgrading the nodes in a hyperconverged ovirt gluster pool? Ie Nodes run 4.0 oVirt, as well as GlusterFS, and hosted-engine running in a gluster storage domain. Put node in maintenance mode and disable glusterfs from ovirt gui, run yum update? Thanks!

4 4

[vdsm] status update: running containers alongside VMs
by Francesco Romani 05 Jan '18

05 Jan '18

Hi everyone, I'm happy to share some progress about the former "convirt"[1] project, which aims to let Vdsm containers alongside VMs, on bare metal. In the last couple of months I kept updating the patch series, which is approaching the readiness to be merged in Vdsm. Please read through this mail to see what the patchset can do now, how you could try it *now*, even before it is merged. Everyone is invited to share thoughts and ideas about how this effort could evolve. This will be a long mail; I will amend, enhance and polish the content and make a blog post (on https://mojaves.github.io) to make it easier to consume and to have some easy-to-find documentation. Later on the same content will appear also on the oVirt blog. Happy hacking! +++ # How to try how the experimental container support for Vdsm. Vdsm is gaining *experimental* support to run containers alongside VMs. Vdsm had since long time the ability to manage VMs which run containers, and recently gained support for [atomic guests](http://www.projectatomic.io/blog/2015/01/running-ovirt-guest-agent-as-privileged-container/). With the new support we are describing, you will be able to manage containers with the same, proven infrastructure that let you manage VMs. This feature is currently being developed and it is still not merged in the Vdsm codebase, so some extra work is needed if you want to try it out. We aiming to merge it in the oVirt 4.1.z cycle. ## What works, aka what to expect The basic features are expected to work: 1. Run any docker image on the public docker registry 2. Make the container accessible from the outside (aka not just from localhost) 3. Use file-based storage for persistent volumes ## What does not yet work, aka what NOT to expect Few things are planned and currently under active development: 1. Monitoring. Engine will not get any update from the container besides "VM" status (Up, Down...) One important drawback is that you will not be told the IP of the container from Engine, you will need to connect to the Vdsm host to discover it using standard docker tools. 2. Proper network integration. Some steps still need manual intervention 3. Stability and recovery - it's pre-alpha software after all! :) ## 1. Introduction and prerequisites Trying out container support affects only the host and the Vdsm. Besides add few custom properties (totally safe and supported since early 3.z), there are zero changes required to the DB and to Engine. Nevertheless, we recommend to dedicate one oVirt 4.y environment, or at least one 4.y host, to try out the container feature. To get started, first thing you need is to setup a vanilla oVirt 4.y installation. We will need to make changes to the Vdsm and to the Vdsm host, so hosted engine and/or oVirt node may add extra complexity, better to avoid them at the moment. The reminder of this tutorial assumes you are using two hosts, one for Vdsm (will be changed) and one for Engine (will require zero changes); furthermore, we assume the Vdsm host is running on CentOS 7.y. We require: - one test host for Vdsm. This host need to have one NIC dedicated to containers. We will use the [docker macvlan driver](https://raesene.github.io/blog/2016/07/23/Docker-MacVLAN/), so this NIC *must not be* part of one bridge. - docker >= 1.12 - oVirt >= 4.0.5 (Vdsm >= 4.18.15) - CentOS >= 7.2 Docker >= 1.12 is avaialable for download [here](https://docs.docker.com/engine/installation/linux/centos/) Caveats: 1. docker from official rpms conflicts con docker from CentOS, and has a different package name: docker-engine vs docker. Please note that the kubernetes package from CentOS, for example, require 'docker', not 'docker-engine'. 2. you may want to replace the default service file [with this one](https://github.com/mojaves/convirt/blob/master/patches/centos72/system… and to use this [sysconfig file](https://github.com/mojaves/convirt/blob/master/patches/centos72/syste…. Here I'm just adding the storage options docker requires, much like the CentOS docker is configured. Configuring docker like this can save you some troubleshooting, especially if you had docker from CentOS installed on the testing box. ## 2. Patch Vdsm to support containers You need to patch and rebuild Vdsm. Fetch [this patch](https://github.com/mojaves/convirt/blob/master/patches/vdsm/4.18.15.… and apply it against Vdsm 4.18.15.1. Vdsm 4.18.15.{1,2,...} are supported as well. Rebuild Vdsm and reinstall on your box. [centos 7.2 packages are here](https://github.com/mojaves/convirt/tree/master/rpms/centos72) Make sure you install the Vdsm command line client (vdsm-cli) Restart *both* Vdsm and Supervdsm, make sure Engine still works flawlessly with patched Vdsm. This ensure that no regression is introduced, and that your environment can run VMs just as before. Now we can proceed adding the container support. start docker: # systemctl start docker-engine (optional) # systemctl enable docker-engine Restart Vdsm again # systemctl restart vdsm Now we can check if Vdsm detects docker, so you can use it: still on the same Vdsm host, run $ vdsClient -s 0 getVdsCaps | grep containers containers = ['docker', 'fake'] This means this Vdsm can run containers using 'docker' and 'fake' runtimes. Ignore the 'fake' runtime; as the name suggests, is a test driver, kinda like /dev/null. Now we need to make sure the host network configuration is fine. ### 2.1. Configure the docker network for Vdsm PLEASE NOTE that the suggested network configuration assumes that * you have one network, `ovirtmgmt` (the default one) you use for everything * you have one Vdsm host with at least two NICs, one bound to the `ovirtmgmt` network, and one spare _This step is not yet automated by Vdsm_, so manual action is needed; Vdsm will take care of this automatically in the future. You can use [this helper script](https://github.com/mojaves/convirt/blob/master/patches/vdsm/cont-se…, which reuses the Vdsm libraries. Make sure you have patched Vdsm to support container before to use it. Let's review what the script needs: # ./cont-setup-net -h usage: cont-setup-net [-h] [--name [NAME]] [--bridge [BRIDGE]] [--interface [INTERFACE]] [--gateway [GATEWAY]] [--subnet [SUBNET]] [--mask [MASK]] optional arguments: -h, --help show this help message and exit --name [NAME] network name to use --bridge [BRIDGE] bridge to use --interface [INTERFACE] interface to use --gateway [GATEWAY] address of the gateway --subnet [SUBNET] subnet to use --mask [MASK] netmask to use So we need to feed --name, --interface, --gateway, --subnet and optionally --mask (default, /24, is often fine). For my case the default mask was indeed fine, so I used the script like this: # ./cont-setup-net --name ovirtmgmt --interface enp3s0 --gateway 192.168.1.1 --subnet 192.168.1.0 Thhis is the output I got: DEBUG:virt.containers.runtime:configuring runtime 'docker' DEBUG:virt.containers.command:* calling ['/bin/docker', 'network', 'inspect', 'ovirtmgmt'] Error: No such network: ovirtmgmt DEBUG:virt.containers.command:* called ['/bin/docker', 'network', 'inspect', 'ovirtmgmt'] DEBUG:virt.containers.runtime.Docker:config: cannot load 'ovirtmgmt', ignored DEBUG:virt.containers.command:* calling ['/bin/docker', 'network', 'create', '-d', 'macvlan', '--subnet=192.168.1.0/24', '--gateway=192.168.1.1', '--ip-range=192.168.1.0/24', '-o', 'parent=enp3s0', 'ovirtmgmt'] DEBUG:virt.containers.command:* called ['/bin/docker', 'network', 'create', '-d', 'macvlan', '--subnet=192.168.1.0/24', '--gateway=192.168.1.1', '--ip-range=192.168.1.0/24', '-o', 'parent=enp3s0', 'ovirtmgmt'] DEBUG:virt.containers.runtime:configuring runtime 'fake' You can clearly see what the script did, and why it needed the root privileges. Let's deoublecheck using the docker tools: # docker network ls NETWORK ID NAME DRIVER SCOPE 91535f3425a8 bridge bridge local d42f7e5561b5 host host local 621ab6dd49b1 none null local f4b88e4a67eb ovirtmgmt macvlan local # docker network inspect ovirtmgmt [ { "Name": "ovirtmgmt", "Id": "f4b88e4a67ebb7886ec74073333d613b1893272530cae4d407c95ab587c5fea1", "Scope": "local", "Driver": "macvlan", "EnableIPv6": false, "IPAM": { "Driver": "default", "Options": {}, "Config": [ { "Subnet": "192.168.1.0/24", "IPRange": "192.168.1.0/24", "Gateway": "192.168.1.1" } ] }, "Internal": false, "Containers": {}, "Options": { "parent": "enp3s0" }, "Labels": {} } ] Looks good! the host configuration is completed. Let's move to the Engine side. ## 3. Configure Engine As mentioned above, we need now to configure Engine. This boils down to: Add a few custom properties for VMs: In case you were already using custom properties, you need to amend the command line to not overwrite your existing ones. # engine-config -s UserDefinedVMProperties='volumeMap=^[a-zA-Z_-]+:[a-zA-Z_-]+$;containerImage=^[a-zA-Z]+(://|)[a-zA-Z]+$;containerType=^(docker|rkt)$' --cver=4.0 It is worth stressing that while the variables are container-specific, the VM custom properties are totally inuntrusive and old concept in oVirt, so this step is totally safe. Now restart Engine to let it use the new variables: # systemctl restart ovirt-engine The next step is actually configure one "container VM" and run it. ## 4. Create the container "VM" To finally run a container, you start creating a VM much like you always did, with few changes 1. most of the hardware-related configuration isn't relevant for container "VMs", besides cpu share and memory limits; this will be better documented in the future; unneeded configuration will just be ignored 2. You need to set some custom properties for your container "VM". Those are actually needed to enable the container flow, and they are documented in the next section. You *need* to set at least `containerType` and `containerImage`. ### 4.2. Custom variables for container support The container support needs some custom properties to be properly configured: 1. `containerImage` (*needed* to enable the container system). Just select the target image you want to run. You can use the standard syntax of the container runtimes. 2. `containerType` (*needed* to enable the container system). Selects the container runtime you want to use. All the available options are always showed. Please note that unavailable container options are not yet grayed out. If you *do not* have rkt support on your host, you still can select it, but it won't work. 3. `volumeMap` key:value like. You can map one "VM" disk (key) to one container volume (value), to have persistent storage. Only file-based storage is supported. Example configuration: `containerImage = redis` `containerType = docker` `volumeMap = vda:data` (this may not be needed, and the volume label is just for illustrative purposes) ### 4.2. A little bit of extra work: preload the images on the Vdsm host This step is not needed by the flow, and will be handled by oVirt in the future. The issue is how the container image are handled. They are stored by the container management system (rkt, docker) on each host, and they are not pre-downloaded. To shorten the duration of the first boot, you are advised to pre-download the image(s) you want to run. For example ## on the Vdsm host you want to use with containers # docker pull redis ## 5. Run the container "VM" You are now all set to run your "VM" using oVirt Engine, just like any existing VM. Some actions doesn't make sense for a container "VM", like live migration. Engine won't stop you to try to do those actions, but they will fail gracefully using the standard errors. ## 6. Next steps What to expect from this project in the future? For the integration with Vdsm, we want to fix the existing known issues, most notably: * add proper monitoring/reporting of the container health * ensure proper integration of the container image store with oVirt storage management * streamline the network configuration What is explicitely excluded yet is any Engine change. This is a Vdsm-only change at the moment, so fixing the following is currently unplanned: * First and foremost, Engine will not distinguish between real VMs and container VMs. Actions unavailable to container will not be hidden from UI. Same for monitoring and configuration data, which will be ignored. * Engine is NOT aware of the volumes one container can use. You must inspect and do the mapping manually. * Engine is NOT aware of the available container runtimes. You must select it carefully Proper integration with Engine may be added in the future once this feature exits from the experimental/provisional stage. Thanks for reading, make sure to share your thoughts on the oVirt mailing lists! +++ [1] we keep calling it that way _only_ internally, because it's a short name we are used to. After the merge/once we release it, we will use a different name, like "vdsm-containers" or something like it. -- Francesco Romani Red Hat Engineering Virtualization R & D Phone: 8261328 IRC: fromani

3 2

Re: [ovirt-users] iSCSI domain on 4kn drives
by Martijn Grendelman 13 Nov '17

13 Nov '17

--------------DE48748F7C67E1FABE46EEAF Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Op 7-8-2016 om 8:19 schreef Yaniv Kaul: > > On Fri, Aug 5, 2016 at 4:42 PM, Martijn Grendelman > <martijn.grendelman(a)isaac.nl <mailto:martijn.grendelman@isaac.nl>> wrote: > > Op 4-8-2016 om 18:36 schreef Yaniv Kaul: >> On Thu, Aug 4, 2016 at 11:49 AM, Martijn Grendelman >> <martijn.grendelman(a)isaac.nl >> <mailto:martijn.grendelman@isaac.nl>> wrote: >> >> Hi, >> >> Does oVirt support iSCSI storage domains on target LUNs using >> a block >> size of 4k? >> >> >> No, we do not - not if it exposes 4K blocks. >> Y. > > Is this on the roadmap? > > > Not in the short term roadmap. > Of course, patches are welcome. It's mainly in VDSM. > I wonder if it'll work in NFS. > Y. I don't think I ever replied to this, but I can confirm that in RHEV 3.6 it works with NFS. Best regards, Martijn. --------------DE48748F7C67E1FABE46EEAF Content-Type: text/html; charset="utf-8" Content-Transfer-Encoding: 7bit <html> <head> <meta content="text/html; charset=utf-8" http-equiv="Content-Type"> </head> <body bgcolor="#FFFFFF" text="#000000"> Op 7-8-2016 om 8:19 schreef Yaniv Kaul:<br> <blockquote cite="mid:280cfbd3a16ad1b76cc7de56bda88f45,CAJgorsbJHLV1e3fH4b4AR3GBp1oi44fDhfeii+PQ1iY1RwUStw@mail.gmail.com" type="cite"> <div dir="ltr"><br> <div class="gmail_extra">On Fri, Aug 5, 2016 at 4:42 PM, Martijn Grendelman <span dir="ltr"><<a moz-do-not-send="true" href="mailto:martijn.grendelman@isaac.nl" target="_blank">martijn.grendelman(a)isaac.nl</a>></span> wrote:<br> <div class="gmail_quote"> <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"> <div bgcolor="#FFFFFF" text="#000000"> Op 4-8-2016 om 18:36 schreef Yaniv Kaul:<br> <blockquote type="cite"> <div dir="ltr"> <div class="gmail_extra"> <div class="gmail_quote"><span class="">On Thu, Aug 4, 2016 at 11:49 AM, Martijn Grendelman <span dir="ltr"><<a moz-do-not-send="true" href="mailto:martijn.grendelman@isaac.nl" target="_blank">martijn.grendelman(a)isaac.nl</a>></span> wrote:<br> </span><span class=""> <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Hi,<br> <br> Does oVirt support iSCSI storage domains on target LUNs using a block<br> size of 4k?<br> </blockquote> <div><br> </div> </span><span class=""> <div>No, we do not - not if it exposes 4K blocks.</div> <div>Y.</div> </span></div> </div> </div> </blockquote> <br> Is this on the roadmap?<br> </div> </blockquote> <div><br> </div> <div>Not in the short term roadmap.</div> <div>Of course, patches are welcome. It's mainly in VDSM.</div> <div>I wonder if it'll work in NFS.</div> <div>Y.</div> </div> </div> </div> </blockquote> <br> I don't think I ever replied to this, but I can confirm that in RHEV 3.6 it works with NFS.<br> <br> Best regards,<br> Martijn.<br> </body> </html> --------------DE48748F7C67E1FABE46EEAF--

4 4

Re: [ovirt-users] How to import a qcow2 disk into ovirt
by Martín Follonier 04 Oct '17

04 Oct '17

Hi, I've done all the recommendations in this thread, and I'm still getting the "Paused by System" message just after the transfer starts. Honestly I don't know were else to look at, cause I don't find any log entry or packet capture that give me a hint about what is happening. I'll appreciate any help! Thank you in advance! Regards Martin On Thu, Sep 1, 2016 at 5:01 PM, Amit Aviram <aavi...(a)redhat.com> wrote: > You can do both, > Through the database, the table is "vdc_options". change "option_value" > where "option_name" = 'ImageProxyAddress' . > > On Thu, Sep 1, 2016 at 4:56 PM, Gianluca Cecchi <gianluca.cec...(a)gmail.com > > wrote: > >> On Thu, Sep 1, 2016 at 3:53 PM, Amit Aviram <aavi...(a)redhat.com> wrote: >> >>> You can just replace this value in the DB and change it to the right >>> FQDN, it is a config value named "ImageProxyAddress". replace "localhost" >>> with the right address (notice that the port is there too). >>> >>> If this will keep happen after users will have the latest version, we >>> will have to open a bug and fix whatever causes the URL to be "localhost". >>> >>> >> Do you mean through "engine-config" or directly into database? >> In this second case which is the table involved? >> >> Gianluca >> > > [root@ractorshe bin]# systemctl stop ovirt-imageio-proxy engine=# select * from vdc_options where option_name='ImageProxyAddress'; option_id | option_name | option_value | version -----------+-------------------+-----------------+--------- 950 | ImageProxyAddress | localhost:54323 | general (1 row) engine=# update vdc_options set option_value='ractorshe.mydomain:54323' where option_name='ImageProxyAddress'; UPDATE 1 engine=# select * from vdc_options where option_name='ImageProxyAddress'; option_id | option_name | option_value | version -----------+-------------------+--------------------------------------+--------- 950 | ImageProxyAddress | ractorshe.mydomain:54323 | general (1 row) engine=# engine=# select * from vdc_options where option_name='ImageProxyAddress'; option_id | option_name | option_value | version -----------+-------------------+--------------------------------------+--------- 950 | ImageProxyAddress | ractorshe.mydomain:54323 | general (1 row) systemctl stop ovirt-engine (otherwise it remained localhost) systemctl start ovirt-engine systemctl start ovirt-imageio-proxy Now transfer is ok. I tried a qcow2 disck configured as 40Gb but containing about 1.6Gb of data. I'm going to connect it to a VM and see if all is ok also from a contents point of view. Gianluca _______________________________________________ Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users

5 6

ovirt-hosted-engine state transition messages
by Jim Kusznir 23 Jul '17

23 Jul '17

Hello: I find that I often get random-seeming messages. A lot of them mention "ReintializeFSM", but I also get engine down, engine start, etc. messages. All the time, nothing appears to be happening on the cluster, and I rarely can find anything wrong or any trigger/cause. Is this normal? What causes this (beyond obvious hardware issues / hosts rebooting)? Most of the time when I get these, my cluster is going along smoothly, and nothing (not even administrative access) is interrupted. Could ISP issues cause these messages to be generated? Thanks! --Jim

5 7

iSCSI storage domain and multipath when adding node
by Gianluca Cecchi 27 Jun '17

27 Jun '17

Hello, my configuration is what described here: http://lists.ovirt.org/pipermail/users/2017-March/080992.html So I'm using iSCSI multipath and not bonding can anyone reproduce? Initial situation is only one node configured and active with some VMS I go and configure a second node; it tries to activate but networks are not all already mapped and so gies to non operational. I setup all networks and activate the node It happens that: - on the first node where I currently have 2 iSCSI connections and 2multipath lines (with p1p1.100 and p1p2) it is instantiated a new iSCSI SID using interface "default" and in multipath -l output I see now 3 lines - on the newly added node I only see 1 iSCSI SID using interface default My way to solve the situation was to go inside iscsi multipath section do nothing but save the same config brutally on first node iscsiadm -m session -u --> all iscsi sessions are closed after a while I see again the original 2 connections recovered, with correct interface names used - on second node iscsiadm -m session -u --> the only session is cloed nothing happens if I set to maintenance the node and then activate the node --> the 2 correct iscsi sessions are activated... Thanks Gianluca

2 5

Lowering the bar for wiki contribution?
by Roy Golan 22 Jun '17

22 Jun '17

I'm getting the feeling I'm not alone in this, authoring and publishing a wiki page isn't as used to be for long time. I want to suggest a bit lighter workflow: 1. Everyone can merge their page - (it's a wiki) Same as with (public and open) code, no one has the motivation to publish a badly written wiki page under their name. True, it can have an impact, but not as with broken code 2. Use Page-Status marker The author first merges the draft. Its now out there and should be updated as time goes and its status is DRAFT. Maintainers will come later and after review would change the status to PUBLISH. That could be a header in on the page: --- page status: DRAFT/PUBLISH --- Simple I think, and should work.

14 23

engine upgrade 4.1.0 => 4.1.1, no more engine console available
by Nelson Lameiras 18 Jun '17

18 Jun '17

------=_Part_30901168_366908900.1490364694843 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: quoted-printable Hello,=20 When upgrading my test setup from 4.0 to 4.1, my engine vm lost it's consol= e (from SPICE to None in GUI)=20 My test setup :=20 2 manually built hosts using centos 7.3, ovirt 4.1=20 1 manually built hosted engine centos 7.3, oVirt 4.1.0.4-el7, accessible wi= th SPICE console via GUI=20 I updated ovirt-engine from 4.1.0 to 4.1.1 by doing on engine :=20 - yum update=20 - engine-setup=20 - reboot engine=20 When accessing 4.1.1 GUI, Graphics is set to "None" on "Virtual Machines" p= age, with "console button" greyed out (all other VMs have the same Graphics= set to the same value as before)=20 I tried to edit engine VM settings, and console options are same as before = (SPLICE, QXL).=20 I'm hopping this is not a new feature, since if we loose network on engine,= console is the only way to debug...=20 Is this a bug?=20 ps. I was able to reproduce this bug 2 times=20 cordialement, regards,=20 =09Nelson LAMEIRAS=20 Ing=C3=A9nieur Syst=C3=A8mes et R=C3=A9seaux / Systems and Networks enginee= r=20 Tel: +33 5 32 09 09 70=20 nelson.lameiras(a)lyra-network.com=20 www.lyra-network.com | www.payzen.eu=20 =09 =09 =09 Lyra Network, 109 rue de l'innovation, 31670 Lab=C3=A8ge, FRANCE=20 ------=_Part_30901168_366908900.1490364694843 Content-Type: multipart/related; boundary="----=_Part_30901169_712869510.1490364694843" ------=_Part_30901169_712869510.1490364694843 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable <html><body><div style=3D"font-family: arial, helvetica, sans-serif; font-s= ize: 12pt; color: #000000"><div data-marker=3D"__QUOTED_TEXT__"><div style= =3D"font-family: arial, helvetica, sans-serif; font-size: 12pt; color: #000= 000"><div>Hello,<br></div><div><br data-mce-bogus=3D"1"></div><div>When upg= rading my test setup from 4.0 to 4.1, my engine vm lost it's console (from = SPICE to None in GUI)<br data-mce-bogus=3D"1"></div><br><div>My test setup = :<br></div><div>2 manually built hosts using centos 7.3, ovirt 4.1<br></div= ><div>1 manually built hosted engine centos 7.3, oVirt 4.1.0.4-el7, accessi= ble with SPICE console via GUI<br></div><br><div>I updated ovirt-engine fro= m 4.1.0 to 4.1.1 by doing on engine :<br></div><div>- yum update<br></div><= div>- engine-setup<br></div><div>- reboot engine<br></div><br><div>When acc= essing 4.1.1 GUI, Graphics is set to "None" on "Virtual Machines" page, wit= h "console button" greyed out (all other VMs have the same Graphics set to = the same value as before)<br></div><div>I tried to edit engine VM settings,= and console options are same as before (SPLICE, QXL).<br></div><br><div>I'= m hopping this is not a new feature, since if we loose network on engine, c= onsole is the only way to debug...<br></div><div><br data-mce-bogus=3D"1"><= /div><div>Is this a bug?<br></div></div><div style=3D"font-family: arial, h= elvetica, sans-serif; font-size: 12pt; color: #000000"><br data-mce-bogus= =3D"1"></div><div style=3D"font-family: arial, helvetica, sans-serif; font-= size: 12pt; color: #000000">ps. I was able to reproduce this bug 2 times<br= data-mce-bogus=3D"1"></div><div style=3D"font-family: arial, helvetica, sa= ns-serif; font-size: 12pt; color: #000000"><br><div><div>cordialement, rega= rds,</div><br><table style=3D"margin: 0px; table-layout: fixed; border: non= e; width: 345pt; padding: 0px;" width=3D"460" cellspacing=3D"0" cellpadding= =3D"0" border=3D"0"><tbody><tr><td style=3D"margin: 0; font-size: 11px; fon= t-family: Arial,sans-serif; color: #2b3c7a; line-height: 16px; width: 86.25= pt; text-align: left;" width=3D"115" valign=3D"top"><a href=3D"https://www.= lyra-network.com/" style=3D"border: none; text-decoration: none; width: 100= %; display: block; clear: both;" target=3D"_blank"><img src=3D"cid:6213d478= 56c2194cb43f7fbca7fede42d2bbb872@zimbra" alt=3D"" height=3D"94" width=3D"11= 5" border=3D"0"></a><br></td><td style=3D"margin: 0; font-size: 11px; font-= family: Arial,sans-serif; color: #2b3c7a; line-height: 16px; width: 258.75p= t;" width=3D"345" valign=3D"top"><table style=3D"margin: 0; width: 258.75pt= ; table-layout: fixed; border: none;" width=3D"345" cellspacing=3D"0" cellp= adding=3D"0" border=3D"0"><tbody><tr><td style=3D"font-size: 16px; font-fam= ily: Arial,sans-serif; color: #2b3c7a; line-height: 18px; font-weight: bold= ;">Nelson LAMEIRAS</td></tr><tr><td style=3D"font-family: Arial,sans-serif;= color: #2b3c7a; font-size: 11px; line-height: 16px;">Ing=C3=A9nieur Syst= =C3=A8mes et R=C3=A9seaux<span style=3D"font-family: Arial,sans-serif; colo= r: #337ab7; font-size: 11px;"> / Systems and Networks engineer</span></td><= /tr><tr><td style=3D"line-height: 16px; font-family: 'Arial',sans-serif; co= lor: #2b3c7a; font-size: 11px;"><span style=3D"font-family: Arial,sans-seri= f; color: #2b3c7a; font-size: 11px;">Tel: +33 5 32 09 09 70</span></td></tr= ><tr><td style=3D"line-height: 16px; font-family: 'Arial',sans-serif; color= : #2b3c7a; font-size: 11px;"><a href=3D"mailto:nelson.lameiras@lyra-network= .com" style=3D"font-size: 11px; font-family: Arial,sans-serif; line-height:= 16px; text-decoration: none;" target=3D"_blank">nelson.lameiras@lyra-netwo= rk.com</a><br></td></tr><tr><td style=3D"line-height: 16px; font-family: 'A= rial',sans-serif; color: #2b3c7a; font-size: 11px;"><a href=3D"https://www.= lyra-network.com/" style=3D"font-size: 11px; font-family: Arial,sans-serif;= line-height: 16px; border: none; text-decoration: none;" target=3D"_blank"= >www.lyra-network.com</a> <a href=3D"https://payzen.eu" style=3D"font-size:= 11px; font-family: Arial,sans-serif; line-height: 16px; border: none; text= -decoration: none;" target=3D"_blank"> | www.payzen.eu</a><br></td></tr></t= body></table></td></tr></tbody></table><table style=3D"margin: 0; table-lay= out: fixed; border: none; width: 345pt;" width=3D"460" cellspacing=3D"0" ce= llpadding=3D"0"><tbody><tr><td style=3D"margin: 0; font-size: 11px; font-fa= mily: Arial,sans-serif; color: #2b3c7a; line-height: 16px; width: 24pt; tex= t-align: left;" width=3D"32" valign=3D"top"><a href=3D"https://www.youtube.= com/channel/UCrVl1CO_Jlu3KbiRH-tQ_vA" style=3D"border: none; text-decoratio= n: none; margin: 0; float: left; display: inline-block; width: 32px;" targe= t=3D"_blank"><img src=3D"cid:fee0c7043a6ec1d238d7c1a097f03e711e4bdd56@zimbr= a" alt=3D"" height=3D"28" width=3D"32" border=3D"0"></a><br></td><td style= =3D"margin: 0; font-size: 11px; font-family: Arial,sans-serif; color: #2b3c= 7a; line-height: 16px; width: 30.75pt; text-align: left;" width=3D"41" vali= gn=3D"top"><a href=3D"https://www.linkedin.com/company/lyra-network_2" styl= e=3D"border: none; text-decoration: none; margin: 0; float: left; display: = inline-block; width: 41px;" target=3D"_blank"><img src=3D"cid:487e72d709dc9= 7cbbfa0b1ba96aee8060575054e@zimbra" height=3D"28" width=3D"41" border=3D"0"= ></a><br></td><td style=3D"margin: 0; font-size: 11px; font-family: Arial,s= ans-serif; color: #2b3c7a; line-height: 16px; width: 31.5pt; text-align: le= ft;" width=3D"42" valign=3D"top"><a href=3D"https://twitter.com/LyraNetwork= " style=3D"border: none; text-decoration: none; margin: 0; float: left; dis= play: inline-block; width: 42px;" target=3D"_blank"><img src=3D"cid:999ede1= ddc50a603985f40ccca2df8880b9ac139@zimbra" alt=3D"" height=3D"28" width=3D"4= 2" border=3D"0"></a><br></td><td style=3D"margin: 0; font-size: 11px; font-= family: Arial,sans-serif; color: #2b3c7a; line-height: 16px; width: 258.75p= t; text-align: left;" width=3D"345" valign=3D"top"><a href=3D"https://payze= n.eu" style=3D"border: none; text-decoration: none; margin: 0; float: left;= display: inline-block; width: 61px;" target=3D"_blank"><img src=3D"cid:be5= 888ad89e097f78d6fcfb233cf1d8d4f6045db@zimbra" alt=3D"" height=3D"28" width= =3D"61" border=3D"0"></a><br></td></tr></tbody></table><table style=3D"marg= in: 0; table-layout: fixed; border: none; width: 345pt;" width=3D"460" cell= spacing=3D"0" cellpadding=3D"0"><tbody><tr><td><hr style=3D"background: #29= 3b79 none repeat scroll 0% 0%; width: 100%; height: 4px; color: #293b79; ma= rgin: 0px;"></td></tr></tbody></table><table style=3D"margin: 0; table-layo= ut: fixed; border: none; width: 345pt;" width=3D"460" cellspacing=3D"0" cel= lpadding=3D"0"><tbody><tr><td style=3D"margin: 0; font-size: 11px; font-fam= ily: Arial,sans-serif; color: #2b3c7a; line-height: 16px; width: 30.75pt; t= ext-align: left;"><div>Lyra Network, 109 rue de l'innovation, 31670 Lab=C3= =A8ge, FRANCE</div></td></tr></tbody></table></div></div><br></div></div></= body></html> ------=_Part_30901169_712869510.1490364694843 Content-Type: image/jpeg; name=element-signature_logo_lyra_115x94.jpg Content-Disposition: attachment; filename=element-signature_logo_lyra_115x94.jpg Content-Transfer-Encoding: base64 Content-ID: <6213d47856c2194cb43f7fbca7fede42d2bbb872@zimbra> /9j/4QAYRXhpZgAASUkqAAgAAAAAAAAAAAAAAP/sABFEdWNreQABAAQAAAA8AAD/4QOBaHR0cDov L25zLmFkb2JlLmNvbS94YXAvMS4wLwA8P3hwYWNrZXQgYmVnaW49Iu+7vyIgaWQ9Ilc1TTBNcENl aGlIenJlU3pOVGN6a2M5ZCI/PiA8eDp4bXBtZXRhIHhtbG5zOng9ImFkb2JlOm5zOm1ldGEvIiB4 OnhtcHRrPSJBZG9iZSBYTVAgQ29yZSA1LjYtYzEzMiA3OS4xNTkyODQsIDIwMTYvMDQvMTktMTM6 MTM6NDAgICAgICAgICI+IDxyZGY6UkRGIHhtbG5zOnJkZj0iaHR0cDovL3d3dy53My5vcmcvMTk5 OS8wMi8yMi1yZGYtc3ludGF4LW5zIyI+IDxyZGY6RGVzY3JpcHRpb24gcmRmOmFib3V0PSIiIHht bG5zOnhtcE1NPSJodHRwOi8vbnMuYWRvYmUuY29tL3hhcC8xLjAvbW0vIiB4bWxuczpzdFJlZj0i aHR0cDovL25zLmFkb2JlLmNvbS94YXAvMS4wL3NUeXBlL1Jlc291cmNlUmVmIyIgeG1sbnM6eG1w PSJodHRwOi8vbnMuYWRvYmUuY29tL3hhcC8xLjAvIiB4bXBNTTpPcmlnaW5hbERvY3VtZW50SUQ9 InhtcC5kaWQ6ZGQwZjkyYzUtNzhhZi1jZTQ1LTgxYmQtMTYwMTFjZjk5YWVjIiB4bXBNTTpEb2N1 bWVudElEPSJ4bXAuZGlkOkU1QUU4Nzk1OEExMzExRTZBNTFCRjVENEYyNDYxNTQ1IiB4bXBNTTpJ bnN0YW5jZUlEPSJ4bXAuaWlkOkU1QUU4Nzk0OEExMzExRTZBNTFCRjVENEYyNDYxNTQ1IiB4bXA6 Q3JlYXRvclRvb2w9IkFkb2JlIFBob3Rvc2hvcCBDQyAyMDE1LjUgKFdpbmRvd3MpIj4gPHhtcE1N OkRlcml2ZWRGcm9tIHN0UmVmOmluc3RhbmNlSUQ9InhtcC5paWQ6ZGQwZjkyYzUtNzhhZi1jZTQ1 LTgxYmQtMTYwMTFjZjk5YWVjIiBzdFJlZjpkb2N1bWVudElEPSJ4bXAuZGlkOmRkMGY5MmM1LTc4 YWYtY2U0NS04MWJkLTE2MDExY2Y5OWFlYyIvPiA8L3JkZjpEZXNjcmlwdGlvbj4gPC9yZGY6UkRG PiA8L3g6eG1wbWV0YT4gPD94cGFja2V0IGVuZD0iciI/Pv/uAA5BZG9iZQBkwAAAAAH/2wCEAAYE BAQFBAYFBQYJBgUGCQsIBgYICwwKCgsKCgwQDAwMDAwMEAwODxAPDgwTExQUExMcGxsbHB8fHx8f Hx8fHx8BBwcHDQwNGBAQGBoVERUaHx8fHx8fHx8fHx8fHx8fHx8fHx8fHx8fHx8fHx8fHx8fHx8f Hx8fHx8fHx8fHx8fH//AABEIAF4AcwMBEQACEQEDEQH/xACdAAEBAAIDAQEAAAAAAAAAAAAACAUH AgMGBAEBAQADAQEAAAAAAAAAAAAAAAACBAUBAxAAAAUDAgAHDQcCBwAAAAAAAAECAwQRBQYSByFR E7RWFzcxQSKS0nOT03RVlQgYYXEyQiMUFYEzsVJicmODOBEAAgECAwcEAgIDAAAAAAAAAAECEQNR EwQhgbESMlIzMUGhFHEVwQUiQzT/2gAMAwEAAhEDEQA/AKpAE9b/AGQZdF3FtNpsd4l29M2DHSll iS6w0bzsp5slqJCiLvERnTuENTRQg7bckntK15vmojj1WfMP0rc+Jy/JD7Fjt+EMueJ6bbnBN4bR lkWdkt+XPtDaHSfjKnSHyUpTZkg+TcLSdFGRjyv3rUo0iqP8EoQkntZ7fcOy5VdrXGYxuccGW2+S 3nCecYq3oUWnU2RmfhGXAPPSXLcJNzVVT8kNVbnKKUHRmppW1/zBOSXVtZS4lpSjNtP8nLKhfcSR alqdPXp+ERhauKKTe38nX1WfMP0qc+Jy/JHPsWO34RPLniOqz5h+lTnxOX5IfYsdvwhlzxHVZ8w/ Spz4nL8kPsWO34Qy54jqs+YfpU58Tl+SH2LHb8IZc8R1WfMP0qc+Jy/JD7Fjt+EMueJ2bCX3MH9y LxZr7eJdxKBCkoW0/JdfaJ5mUy2a0EszL/MRHTuGGshDLTiqVf8AAst81GUGMssgAAAAE5b89s+L +zwefPDV0fhlv4FW71oo0ZRaAAAAAAAAAAAAACdtj+3DLfNXDn7I1dX4Y7uBWtdbKJGUWQAAAACc t+e2fF/Z4PPnhq6Pwy38Crd60UaMotAAAAAAAAAAAAABO2x/bhlvmrhz9kaur8Md3ArWutlEjKLI AAAABOW/PbPi/s8Hnzw1dH4Zb+BVu9aKNGUWjAKzrGk5cnEjkq/nVo5RMbk3NOnkzd/uU0fgKvdH rky5eb2I86rQz48iQAAAAAAAAABO2x/bhlvmrhz9kaur8Md3ArWutlEjKLIAAAABOW/PbPi/s8Hn zw1dH4Zb+BVu9aKNGUWjSD//AKkj+xnzJQ0V/wA2/wDkr/7D3e7GX5DiOMfzlniMTEMPIRORIJfg tOeCladCk/nNJH94raa1GcuVnpck4qqOrJdz4dr2yazKOhDjkxhlUGMszop98i/TOlD/AE/CNX+0 x23p27nIJXKRqeeyjdnLMd27sGSzLdEO4Xd4uWifqkhDDiFut0qrUSzQlNa9wz7g9bemjK44puiI yuNRTOzGs53hud+gvzsYjwMVnqNfLuqUTrEck69bitZmStPc1NJIz4hy5ZtKLpKskIzk36bDHRt2 9yMsuMw9v8ejybNBc5M5s5Rp5Uy4aEZuMJSai4dPCZFStBN6a3BLne1nMyT6Uffgu8GQ5DnysXuN mbtZx461TG1ms3kyGiLWRHXToMz8Hg7nfMQvaWMYcydTsLjcqG2BSPYnbY/twy3zVw5+yNXV+GO7 gVrXWyiRlFkAAAAAnLfntnxf2eDz54auj8Mt/Aq3etFGjKLROmdZbAxL5g/5yey6/GjREJW2wSTc M3YpoKms0F3VcY1bNpzscqKs5UnU9pad4cG3Fefw1UWXFO7x3mULkpaJJnoM6JNC10WREak/aXGK 8tLO1/ns2HorilsNTYzar/kOQWTa+5tmmBjk+W9cKGqimkrJS68RcCkoV/yC7clGMXcXrJI8Yptq OBsj5oEpTiNmSRESSuKSJJFwUJlzgoKv9f1P8Hrf9Db1wh/vbVJh6tH7lhbOvi5RBpr/AEqKMXR1 PZrYaC2x3Jgbawp+IZjBkwpkWS480603rSslkRU7qTOuiqFlUlEfepw6WosO61ODK9ufLsZ27f36 RkG/8q9OwXbe3PgKciMPp0uHHS22hpxRf60o1f4VC9DlsUrWjEHWdSghllknbY/twy3zVw5+yNXV +GO7gVrXWyiRlFkAAAAAnLfntnxf2eDz54auj8Mt/Aq3etFGjKLRxU00o6qQlR8ZkRhUGMyO7W7H 7FOvUpCSZgMrfMqERqNJeCgj41qokvtMTtxcpJL3OSdFU1n8vFimPwbrnF18O55DIXybhlw8ihZm s08RLdqVOJJC5rZqqgvSJ42V7v3MpM3dTBnyWbtBQmHFnXFpLzdXOWjW9tWo2irwPpd0pWhVPBPU R0qILTVWx+y+STuYmQj7sxHH1Kctb7NuahnMflKW2akk3J/bvGlojqtpv8ZuJP8ACR8Ag9M8dtTu YdErdfEJTCZKrY/L5JSySbrbCdKmicdWRLeWlJK/bs8skq+ElSacJ8HVppr3OZiP2RuxFK4W5xi3 LK2T5D8NmY8baHHnWySSeTSa6to1K8JTumn3gtM6PbtQzDYYqnqTtsf24Zb5q4c/ZGrq/DHdwK1r rZRIyiyAAAAATlvz2z4v7PB588NXR+GW/gVbvWijRlFoADGZHjVmyO2Ltd4YOTAcUlbjJLcbJRoO qam2pCuA+GlROFxwdV6nJRT2M+q226DbLfHt8BkmIcRtLMdlNaJQgqEVTqZ/eYjKTbqwlQ5Hb4Bp Uk4zRpUpa1FoTQ1uEaVqPg7qiUZGffDmYodSbNZ0toaTBjk02hbTaCaQSUtu/wBxCSpQkr/MXfHe d4iiP12z2h5k2XYMdxlSkuKbW0hSTW2kkIUZGVKpSkiI+8RApPEURydtltdQpDsRlxCtepKm0mR8 qdXKkZfn/NxjnMxQ+kcOk7bH9uGW+auHP2Rq6vwx3cCta62USMosgAAAAE5b89s+L+zwefPDV0fh lv4FW71oo0ZRaAAAAAAAAAAAAACdtj+3DLfNXDn7I1dX4Y7uBWtdbKJGUWQAAAACb9/3mWN4cbff WTTLUWEt1xX4UpTNeNSj+wiGtolW1LfwKt7qRuTrY226RwfSkKH1rnaz3zI4jrZ226RwfSkH1rna xmRxHWztt0jg+lIPrXO1jMjiOtnbbpHB9KQfWudrGZHEdbO23SOD6Ug+tc7WMyOJ+o3W24WtKE5F CUpR0SknCqZmH1rnazjuxW2pnbTfbPeGnHbXMamNtK0OLaVqJKjKtDELlqUNklQ7C5GfS6mOu+f4 XZpy4F0vMWHMbJKlsOrJKyJRVTUvtIdjZnJVSOuaXqfF1sbbdI4PpSEvrXO1nMyOJp7YiQxJ3oyi RHcS9Hejz3GXUcKVoVOZNKi+wyOovaxUsx3cDwtdbKNGUWgAAAADX+4GzGPZveWbtcpsuO+xGTFS iObRINCFrcIz1oWdaun3xas6qVtUSR5ztKTqeZ+lrCvely8Zj1Q9f2M8EQyEPpawr3pcvGY9UH7G eCGQh9LWFe9Ll4zHqg/YzwQyEPpawr3pcvGY9UH7GeCGQh9LWFe9Ll4zHqg/YzwQyEc2flfwxl5t 1NzuJqbUSiI1MUqX/UOr+xmn6I5LTRaaxNg4XhNuxOHIiwX3n0SXCdWb5pMyMk6eDSlPEPDU6mV5 pteg0+nVpNI8zm+xeNZfkDt7nzprEl5Dbam2FNEgibTpKmttR97jErWslCNEkTlaUnUwP0tYV70u XjMeqHp+xngiOQj023+zGPYReXrtbZsuQ+/GVFUiQbRoJC1ocMy0IQdatF3x5XtVK4qNInC0oups AVT0AAAAAAAAAAAAAAAAAAAAAAAAAAAAD//Z ------=_Part_30901169_712869510.1490364694843 Content-Type: image/jpeg; name=element-signature_logo_YouTube_32x28.jpg Content-Disposition: attachment; filename=element-signature_logo_YouTube_32x28.jpg Content-Transfer-Encoding: base64 Content-ID: <fee0c7043a6ec1d238d7c1a097f03e711e4bdd56@zimbra> /9j/4QAYRXhpZgAASUkqAAgAAAAAAAAAAAAAAP/sABFEdWNreQABAAQAAAA8AAD/4QOBaHR0cDov L25zLmFkb2JlLmNvbS94YXAvMS4wLwA8P3hwYWNrZXQgYmVnaW49Iu+7vyIgaWQ9Ilc1TTBNcENl aGlIenJlU3pOVGN6a2M5ZCI/PiA8eDp4bXBtZXRhIHhtbG5zOng9ImFkb2JlOm5zOm1ldGEvIiB4 OnhtcHRrPSJBZG9iZSBYTVAgQ29yZSA1LjYtYzEzMiA3OS4xNTkyODQsIDIwMTYvMDQvMTktMTM6 MTM6NDAgICAgICAgICI+IDxyZGY6UkRGIHhtbG5zOnJkZj0iaHR0cDovL3d3dy53My5vcmcvMTk5 OS8wMi8yMi1yZGYtc3ludGF4LW5zIyI+IDxyZGY6RGVzY3JpcHRpb24gcmRmOmFib3V0PSIiIHht bG5zOnhtcE1NPSJodHRwOi8vbnMuYWRvYmUuY29tL3hhcC8xLjAvbW0vIiB4bWxuczpzdFJlZj0i aHR0cDovL25zLmFkb2JlLmNvbS94YXAvMS4wL3NUeXBlL1Jlc291cmNlUmVmIyIgeG1sbnM6eG1w PSJodHRwOi8vbnMuYWRvYmUuY29tL3hhcC8xLjAvIiB4bXBNTTpPcmlnaW5hbERvY3VtZW50SUQ9 InhtcC5kaWQ6ZGQwZjkyYzUtNzhhZi1jZTQ1LTgxYmQtMTYwMTFjZjk5YWVjIiB4bXBNTTpEb2N1 bWVudElEPSJ4bXAuZGlkOjQ1REY5Njk1OEExNzExRTY5OUVDOTI1QTU3QzAwNzI0IiB4bXBNTTpJ bnN0YW5jZUlEPSJ4bXAuaWlkOjQ1REY5Njk0OEExNzExRTY5OUVDOTI1QTU3QzAwNzI0IiB4bXA6 Q3JlYXRvclRvb2w9IkFkb2JlIFBob3Rvc2hvcCBDQyAyMDE1LjUgKFdpbmRvd3MpIj4gPHhtcE1N OkRlcml2ZWRGcm9tIHN0UmVmOmluc3RhbmNlSUQ9InhtcC5paWQ6ZGQwZjkyYzUtNzhhZi1jZTQ1 LTgxYmQtMTYwMTFjZjk5YWVjIiBzdFJlZjpkb2N1bWVudElEPSJ4bXAuZGlkOmRkMGY5MmM1LTc4 YWYtY2U0NS04MWJkLTE2MDExY2Y5OWFlYyIvPiA8L3JkZjpEZXNjcmlwdGlvbj4gPC9yZGY6UkRG PiA8L3g6eG1wbWV0YT4gPD94cGFja2V0IGVuZD0iciI/Pv/uAA5BZG9iZQBkwAAAAAH/2wCEAAYE BAQFBAYFBQYJBgUGCQsIBgYICwwKCgsKCgwQDAwMDAwMEAwODxAPDgwTExQUExMcGxsbHB8fHx8f Hx8fHx8BBwcHDQwNGBAQGBoVERUaHx8fHx8fHx8fHx8fHx8fHx8fHx8fHx8fHx8fHx8fHx8fHx8f Hx8fHx8fHx8fHx8fH//AABEIABwAIAMBEQACEQEDEQH/xAB5AAADAQEAAAAAAAAAAAAAAAAABwgF BgEAAgMBAAAAAAAAAAAAAAAAAAQCAwUBEAABBAECBAUFAAAAAAAAAAABAgMEBQARBiESEwcxUdIU CEEik1UYEQACAQMCBQUAAAAAAAAAAAAAAQIRAwQhMVFhEiITQaHBYhX/2gAMAwEAAhEDEQA/AKpw AnD5Hbg3JA35XxKqxmxUPVrJEaI862FuqkPp4IbI5lHQDNXBhFwbaW4tebqcMIvfYjURtz6eesv1 YzWz9fYh38zR7eX2+mu5lHV3VhaNOe8aTJgTHnweVXEBba1cQRkb8IeNtJbHYN9WpW+YY2T53inQ 4HfzZk6a4lmHGaiOSHl8EoT7mSOZR+gBIzUxU3Yklz+Be4+9DRl30N3dMOxjbyro9EzHW3MqupHc L7qlaoX1SsFvlHl44moPpa6XXiW113FPuu3qrT5I7dfrJLUxllMRl15hQWjqBbiuXmTqCQlQx23F rHdSqTrNFFZlDAou7vZa43xuSNaw7CPFZZhIiKbeSsqKkOuuE/aCNNHcexspW40a9Sm5bcmcH/J1 5+0rvxOenGf0o8GQ8DN7ZXxzv9vbpqrhy0huMQJCHlstocBKU+ITqANcru50ZRao9SUbLTqPvMwv DAAwAMAP/9k= ------=_Part_30901169_712869510.1490364694843 Content-Type: image/jpeg; name=element-signature_logo_LinkedIn_41x28.jpg Content-Disposition: attachment; filename=element-signature_logo_LinkedIn_41x28.jpg Content-Transfer-Encoding: base64 Content-ID: <487e72d709dc97cbbfa0b1ba96aee8060575054e@zimbra> /9j/4QAYRXhpZgAASUkqAAgAAAAAAAAAAAAAAP/sABFEdWNreQABAAQAAAA8AAD/4QOBaHR0cDov L25zLmFkb2JlLmNvbS94YXAvMS4wLwA8P3hwYWNrZXQgYmVnaW49Iu+7vyIgaWQ9Ilc1TTBNcENl aGlIenJlU3pOVGN6a2M5ZCI/PiA8eDp4bXBtZXRhIHhtbG5zOng9ImFkb2JlOm5zOm1ldGEvIiB4 OnhtcHRrPSJBZG9iZSBYTVAgQ29yZSA1LjYtYzEzMiA3OS4xNTkyODQsIDIwMTYvMDQvMTktMTM6 MTM6NDAgICAgICAgICI+IDxyZGY6UkRGIHhtbG5zOnJkZj0iaHR0cDovL3d3dy53My5vcmcvMTk5 OS8wMi8yMi1yZGYtc3ludGF4LW5zIyI+IDxyZGY6RGVzY3JpcHRpb24gcmRmOmFib3V0PSIiIHht bG5zOnhtcE1NPSJodHRwOi8vbnMuYWRvYmUuY29tL3hhcC8xLjAvbW0vIiB4bWxuczpzdFJlZj0i aHR0cDovL25zLmFkb2JlLmNvbS94YXAvMS4wL3NUeXBlL1Jlc291cmNlUmVmIyIgeG1sbnM6eG1w PSJodHRwOi8vbnMuYWRvYmUuY29tL3hhcC8xLjAvIiB4bXBNTTpPcmlnaW5hbERvY3VtZW50SUQ9 InhtcC5kaWQ6ZGQwZjkyYzUtNzhhZi1jZTQ1LTgxYmQtMTYwMTFjZjk5YWVjIiB4bXBNTTpEb2N1 bWVudElEPSJ4bXAuZGlkOjY2MEYzRTFGOEExNzExRTY5QzI5OUNGQkY1MzM2MUQ1IiB4bXBNTTpJ bnN0YW5jZUlEPSJ4bXAuaWlkOjY2MEYzRTFFOEExNzExRTY5QzI5OUNGQkY1MzM2MUQ1IiB4bXA6 Q3JlYXRvclRvb2w9IkFkb2JlIFBob3Rvc2hvcCBDQyAyMDE1LjUgKFdpbmRvd3MpIj4gPHhtcE1N OkRlcml2ZWRGcm9tIHN0UmVmOmluc3RhbmNlSUQ9InhtcC5paWQ6ZGQwZjkyYzUtNzhhZi1jZTQ1 LTgxYmQtMTYwMTFjZjk5YWVjIiBzdFJlZjpkb2N1bWVudElEPSJ4bXAuZGlkOmRkMGY5MmM1LTc4 YWYtY2U0NS04MWJkLTE2MDExY2Y5OWFlYyIvPiA8L3JkZjpEZXNjcmlwdGlvbj4gPC9yZGY6UkRG PiA8L3g6eG1wbWV0YT4gPD94cGFja2V0IGVuZD0iciI/Pv/uAA5BZG9iZQBkwAAAAAH/2wCEAAYE BAQFBAYFBQYJBgUGCQsIBgYICwwKCgsKCgwQDAwMDAwMEAwODxAPDgwTExQUExMcGxsbHB8fHx8f Hx8fHx8BBwcHDQwNGBAQGBoVERUaHx8fHx8fHx8fHx8fHx8fHx8fHx8fHx8fHx8fHx8fHx8fHx8f Hx8fHx8fHx8fHx8fH//AABEIABwAKQMBEQACEQEDEQH/xAB2AAEBAQEAAAAAAAAAAAAAAAAABggH AQEAAwEAAAAAAAAAAAAAAAAAAwQFAhAAAQMEAgICAgMBAAAAAAAAAQIDBAARBQYhEjEHMghBE1Fh IhcRAAICAQIDCQAAAAAAAAAAAAABAgMREgQxkTIhQVGhscETMxX/2gAMAwEAAhEDEQA/ANU0Bl33 zsuzQfZcmHj8tMiMKaihDLMl1psKcQkXslSUjk8mtjZ1xdeWkVbW9RDZ/ZN8wOXkYnI7LKMuL1Lq o+RddaIWkLHVwLAPCuf4NWYVwksqPkcNtd5V+ldr2ef7MwkaZmJsqK6p/uy9JdcbUBGcULpUog8i 9Q7uuKreEjquT1GsKxC2KAUBk37B2/6y72t1tB7X8dbIvf8Aq3mtvZfVzKlvUWWw7Dr+Dfy8rCt4 d153Z8ew0FNx3kohuxmUyFtAfFPyBUOBz+arwhKWE89L9SRtLmTuns4xj7LLaxYaGNE6SYojlJZ6 rhLUf19f89eyj4qa1t7ft449ziPWairGLQoBQHFvZ/onObht0jNxclFjMPNtNpZdS4Vj9aAk36gj mtDb7yMIaWiGdTbySSfqnsKbdctAFh1Fm3Bwfx8fFT/ox8GcfAyk9dfX7OapuGNzj+SiPRoJcKmG kuBRDjS2x1uAPK71DfvYzg444nUKmnk7lWcTigFAKAUAoBQCgP/Z ------=_Part_30901169_712869510.1490364694843 Content-Type: image/jpeg; name=element-signature_logo_Twitter_42x28.jpg Content-Disposition: attachment; filename=element-signature_logo_Twitter_42x28.jpg Content-Transfer-Encoding: base64 Content-ID: <999ede1ddc50a603985f40ccca2df8880b9ac139@zimbra> /9j/4QAYRXhpZgAASUkqAAgAAAAAAAAAAAAAAP/sABFEdWNreQABAAQAAAA8AAD/4QOBaHR0cDov L25zLmFkb2JlLmNvbS94YXAvMS4wLwA8P3hwYWNrZXQgYmVnaW49Iu+7vyIgaWQ9Ilc1TTBNcENl aGlIenJlU3pOVGN6a2M5ZCI/PiA8eDp4bXBtZXRhIHhtbG5zOng9ImFkb2JlOm5zOm1ldGEvIiB4 OnhtcHRrPSJBZG9iZSBYTVAgQ29yZSA1LjYtYzEzMiA3OS4xNTkyODQsIDIwMTYvMDQvMTktMTM6 MTM6NDAgICAgICAgICI+IDxyZGY6UkRGIHhtbG5zOnJkZj0iaHR0cDovL3d3dy53My5vcmcvMTk5 OS8wMi8yMi1yZGYtc3ludGF4LW5zIyI+IDxyZGY6RGVzY3JpcHRpb24gcmRmOmFib3V0PSIiIHht bG5zOnhtcE1NPSJodHRwOi8vbnMuYWRvYmUuY29tL3hhcC8xLjAvbW0vIiB4bWxuczpzdFJlZj0i aHR0cDovL25zLmFkb2JlLmNvbS94YXAvMS4wL3NUeXBlL1Jlc291cmNlUmVmIyIgeG1sbnM6eG1w PSJodHRwOi8vbnMuYWRvYmUuY29tL3hhcC8xLjAvIiB4bXBNTTpPcmlnaW5hbERvY3VtZW50SUQ9 InhtcC5kaWQ6ZGQwZjkyYzUtNzhhZi1jZTQ1LTgxYmQtMTYwMTFjZjk5YWVjIiB4bXBNTTpEb2N1 bWVudElEPSJ4bXAuZGlkOjdDMkI3MjMyOEExNzExRTY5MDUyRTk1NEIyREUwNjVCIiB4bXBNTTpJ bnN0YW5jZUlEPSJ4bXAuaWlkOjdDMkI3MjMxOEExNzExRTY5MDUyRTk1NEIyREUwNjVCIiB4bXA6 Q3JlYXRvclRvb2w9IkFkb2JlIFBob3Rvc2hvcCBDQyAyMDE1LjUgKFdpbmRvd3MpIj4gPHhtcE1N OkRlcml2ZWRGcm9tIHN0UmVmOmluc3RhbmNlSUQ9InhtcC5paWQ6ZGQwZjkyYzUtNzhhZi1jZTQ1 LTgxYmQtMTYwMTFjZjk5YWVjIiBzdFJlZjpkb2N1bWVudElEPSJ4bXAuZGlkOmRkMGY5MmM1LTc4 YWYtY2U0NS04MWJkLTE2MDExY2Y5OWFlYyIvPiA8L3JkZjpEZXNjcmlwdGlvbj4gPC9yZGY6UkRG PiA8L3g6eG1wbWV0YT4gPD94cGFja2V0IGVuZD0iciI/Pv/uAA5BZG9iZQBkwAAAAAH/2wCEAAYE BAQFBAYFBQYJBgUGCQsIBgYICwwKCgsKCgwQDAwMDAwMEAwODxAPDgwTExQUExMcGxsbHB8fHx8f Hx8fHx8BBwcHDQwNGBAQGBoVERUaHx8fHx8fHx8fHx8fHx8fHx8fHx8fHx8fHx8fHx8fHx8fHx8f Hx8fHx8fHx8fHx8fH//AABEIABwAKgMBEQACEQEDEQH/xAB3AAEBAQEBAAAAAAAAAAAAAAAABwUI BgEBAAMBAQAAAAAAAAAAAAAAAAMEBQIBEAABAwIEBwEBAQAAAAAAAAABAgMEAAUREhMGITFBFBUH CIEiFhEAAgIBAgQHAAAAAAAAAAAAAAERAgMxBCHBEgVBUWGBQhMV/9oADAMBAAIRAxEAPwDC9g7u 3dH33uJiNeri2wxcJQQ01JfCUNodVwCUqwSlI/AK3sGKropS0Kd7OWZMXcPsyZDdnQ7he5UFhQQ/ LZelOMoURiEqWlRAOFdumNOGqyeTYtPzFfL1df8ASm5XCTP0ey0e5eceyZu4zZc5VhjlGOFZ/cKJ dMKNeRNhbclzrOJxQCgOSW7o5a/oKXMRFXNT5iYw/EaAUtbL61tOBKTwXglWOXrW30zgj0RUmLlb 9p3rZ/r/ANd3GxWJtm3XC8B1EO2RsEqDkng88pAP8JSnEk8ugqlt6Xy5Fa3FImyNVUI8z8nJCU7o SOSRAA/O5qbuXx9+Rxg8ToGsssCgFAc/7q+b9xXrc11u7V3iNN3CW/JbQUuhaUuuFYBIHMA9K08e +rWqUPgivbC25MofK25Qoq81DKjwKlJeUT+kE13+jXyZ59DKX6a9WXPYfmO+msTPJdtp6AWMuhq4 5swHPVFVN1uFkiFoS46dJSqqEgoBQCgFAKAUAoBQH//Z ------=_Part_30901169_712869510.1490364694843 Content-Type: image/jpeg; name=element-signature_payzen_61x28.jpg Content-Disposition: attachment; filename=element-signature_payzen_61x28.jpg Content-Transfer-Encoding: base64 Content-ID: <be5888ad89e097f78d6fcfb233cf1d8d4f6045db@zimbra> /9j/4QAYRXhpZgAASUkqAAgAAAAAAAAAAAAAAP/sABFEdWNreQABAAQAAAA8AAD/4QOBaHR0cDov L25zLmFkb2JlLmNvbS94YXAvMS4wLwA8P3hwYWNrZXQgYmVnaW49Iu+7vyIgaWQ9Ilc1TTBNcENl aGlIenJlU3pOVGN6a2M5ZCI/PiA8eDp4bXBtZXRhIHhtbG5zOng9ImFkb2JlOm5zOm1ldGEvIiB4 OnhtcHRrPSJBZG9iZSBYTVAgQ29yZSA1LjYtYzEzMiA3OS4xNTkyODQsIDIwMTYvMDQvMTktMTM6 MTM6NDAgICAgICAgICI+IDxyZGY6UkRGIHhtbG5zOnJkZj0iaHR0cDovL3d3dy53My5vcmcvMTk5 OS8wMi8yMi1yZGYtc3ludGF4LW5zIyI+IDxyZGY6RGVzY3JpcHRpb24gcmRmOmFib3V0PSIiIHht bG5zOnhtcE1NPSJodHRwOi8vbnMuYWRvYmUuY29tL3hhcC8xLjAvbW0vIiB4bWxuczpzdFJlZj0i aHR0cDovL25zLmFkb2JlLmNvbS94YXAvMS4wL3NUeXBlL1Jlc291cmNlUmVmIyIgeG1sbnM6eG1w PSJodHRwOi8vbnMuYWRvYmUuY29tL3hhcC8xLjAvIiB4bXBNTTpPcmlnaW5hbERvY3VtZW50SUQ9 InhtcC5kaWQ6ZGQwZjkyYzUtNzhhZi1jZTQ1LTgxYmQtMTYwMTFjZjk5YWVjIiB4bXBNTTpEb2N1 bWVudElEPSJ4bXAuZGlkOkU1NjczQjM2OEEzNDExRTZCOEJBQ0Y4Mzg3RTEzODkyIiB4bXBNTTpJ bnN0YW5jZUlEPSJ4bXAuaWlkOkU1NjczQjM1OEEzNDExRTZCOEJBQ0Y4Mzg3RTEzODkyIiB4bXA6 Q3JlYXRvclRvb2w9IkFkb2JlIFBob3Rvc2hvcCBDQyAyMDE1LjUgKFdpbmRvd3MpIj4gPHhtcE1N OkRlcml2ZWRGcm9tIHN0UmVmOmluc3RhbmNlSUQ9InhtcC5paWQ6ZGQwZjkyYzUtNzhhZi1jZTQ1 LTgxYmQtMTYwMTFjZjk5YWVjIiBzdFJlZjpkb2N1bWVudElEPSJ4bXAuZGlkOmRkMGY5MmM1LTc4 YWYtY2U0NS04MWJkLTE2MDExY2Y5OWFlYyIvPiA8L3JkZjpEZXNjcmlwdGlvbj4gPC9yZGY6UkRG PiA8L3g6eG1wbWV0YT4gPD94cGFja2V0IGVuZD0iciI/Pv/uAA5BZG9iZQBkwAAAAAH/2wCEAAYE BAQFBAYFBQYJBgUGCQsIBgYICwwKCgsKCgwQDAwMDAwMEAwODxAPDgwTExQUExMcGxsbHB8fHx8f Hx8fHx8BBwcHDQwNGBAQGBoVERUaHx8fHx8fHx8fHx8fHx8fHx8fHx8fHx8fHx8fHx8fHx8fHx8f Hx8fHx8fHx8fHx8fH//AABEIABwAPQMBEQACEQEDEQH/xABvAAABBAMAAAAAAAAAAAAAAAAAAQUG BwIDBAEBAAAAAAAAAAAAAAAAAAAAABAAAQQABAQEAgsBAAAAAAAAAQIDBAUAERIGITETFEEiFQfS I1FhcYGhMlIkRMQWhhEBAAAAAAAAAAAAAAAAAAAAAP/aAAwDAQACEQMRAD8AvqZ7q7OhzZMSS9IQ Yjy2JT/avqZbW2rSvU6lBSACOeeAljLzTzSHmVhxpxIW24k5pUlQzBBHgRgM8BBJ9fKuvcGwr3La wgxIlfGeaagyVsJ1uOOBRUBmOSRgI0bnZgfQwdx7qDrroYZSVzBrcJ0hKM2xq+7AWBU7PTXTEShc 2svRx6MuWp5o5gjigj68BombFRKmPyTfXTPXWpzoszloaRqOelCQPKkeAwEP6lp6f6V6vYaP9Z6b 3fcr7ntuhno6vPnxwGyohb2ntbpr6Y17NdKt7Bp5+YHlPJLitKyltI0KGk+XPANVgzV1Eyyqbe3s IMmnhsMbVaYcebDraY+XVbQ15XXFOghQVnkMBkbjcVPTUs6M5IkPbnpWa1hKlrWG7QZBp0hROnUh xRUfHTgJDWuwtsbptVTpC1xaqhgJfkuFTji9DjoKiTmpSlq/HAcO2d11d/cuXUySJG4C0+NvbfCH CmK2hClHUop0GQ6E+dWfAeUYBi2lY2E+zgW7twhVlHDk+7AkzFO9u2lRdjORFIEZrTmAkA+GYwDl TwLJhjZFouxsF3NzN6r7Lj7imExHUOSHWi0TpyCdORIzzwHT/J/7n+vgLVAA5YBChBUlRSCpOelR HEZ88sA2WG3YVhb1lnJW4VVJcXFjAgM9VxOjqKTlmVJTnp48M8Ax2+3N3J3TJu6KVAbRKisxnWpr brh+SpasxoKf14BBD91hxE2kB+nt5Px4AEL3VGoiZSAr4qyjyOP2+fAL2nuvw/e0vDl8iT8eAbv8 Lur0vPvYXrPrfrfU6bvb59Lp6NOev83HngLBwBgDAGAMAYAwBgP/2Q== ------=_Part_30901169_712869510.1490364694843-- ------=_Part_30901168_366908900.1490364694843--

10 46

Timeout for Hosts
by Sven Achtelik 29 May '17

29 May '17

--_000_BFAB40933B3367488CE6299BAF8592D1014E52CC4584SOCRATESasl_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hi All, I have 2 hosts which are at remote locations where the ISP is forcing a con= nection reset after some days. During that reset the connection will be dow= n for at most 2 minutes and the engine starts to complain about the hosts n= ot being reachable. What is the right value to tweak to compensate this ? Is it on of these: TimeoutToResetVdsInSeconds, VdsRefreshRate, vdsTimeout ?= And is it possible to only apply this for a certain cluster or DC or is it= global ? Thank you, Sven --_000_BFAB40933B3367488CE6299BAF8592D1014E52CC4584SOCRATESasl_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <html xmlns:v=3D"urn:schemas-microsoft-com:vml" xmlns:o=3D"urn:schemas-micr= osoft-com:office:office" xmlns:w=3D"urn:schemas-microsoft-com:office:word" = xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" xmlns=3D"http:= //www.w3.org/TR/REC-html40"><head><META HTTP-EQUIV=3D"Content-Type" CONTENT= =3D"text/html; charset=3Dus-ascii"><meta name=3DGenerator content=3D"Micros= oft Word 15 (filtered medium)"><style></style></head><body lang=3DDE link=3D"#0563C1" v= link=3D"#954F72"><div class=3DWordSection1><p class=3DMsoNormal>Hi All, <o:= p></o:p></p><p class=3DMsoNormal><o:p> </o:p></p><p class=3DMsoNormal>= <span lang=3DEN-US>I have 2 hosts which are at remote locations where the I= SP is forcing a connection reset after some days. During that reset the con= nection will be down for at most 2 minutes and the engine starts to complai= n about the hosts not being reachable. What is the right value to tweak to = compensate this ? <o:p></o:p></span></p><p class=3DMsoNormal><span lang=3DE= N-US>Is it on of these: TimeoutToResetVdsInSeconds, VdsRefreshRate, vdsTime= out ? And is it possible to only apply this for a certain cluster or DC or = is it global ? <o:p></o:p></span></p><p class=3DMsoNormal><span lang=3DEN-U= S style=3D'mso-fareast-language:DE'><o:p> </o:p></span></p><p class=3D= MsoNormal><span lang=3DEN-US style=3D'mso-fareast-language:DE'>Thank you, <= o:p></o:p></span></p><p class=3DMsoNormal><span lang=3DEN-US style=3D'mso-f= areast-language:DE'><o:p> </o:p></span></p><p class=3DMsoNormal><span = lang=3DEN-US style=3D'mso-fareast-language:DE'>Sven </span><o:p></o:p></p><= /div></body></html>= --_000_BFAB40933B3367488CE6299BAF8592D1014E52CC4584SOCRATESasl_--

3 8

Building ovirt-host-deploy gives `configure: error: otopi-devtools required but missing`
by Leni Kadali Mutungi 19 May '17

19 May '17

Hello. I got the error mentioned in the subject when when trying to build ovirt-host-deploy. Full output here: https://paste.fedoraproject.org/paste/Dh7FF1XjhDa2TGNSBs~o815M1UNdIGYhyRLiv… The troubleshooting I've done so far is as follows: 1. Rebuilt otopi, running the commands `autoreconf -ivf` and then `./configure --enable-java-sdk --with-maven`. This made `make` download a host of stuff for otopi project from https://repo.maven.apache.org It did this again when I ran `make install`. When I went back to the ovirt-host-deploy directory, I ran `./configure`, both with the --enable-java-sdk and --with-maven options. Got the same error again. 2. I tried running entering the directory src/java and running `mvn install`. I received a build success message and then proceeded to run ./configure --build=x86_64-linux-gnu --host=x86_64-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --disable-python-syntax-check --enable-java-sdk --with-local-version=otopi-1.7.0.master COMMONS_LOGGING_JAR=/usr/share/java/commons-logging.jar JUNIT_JAR=/usr/share/java/junit.jar I omitted the --disable-dependency-tracking and --docdir=/usr/share/doc/otopi-1.7.0 options because of the following error: configure: WARNING: unrecognized options: --disable-dependency-tracking and the fact that I didn't have the directory /usr/share/doc/otopi-1.7.0 respectively. I got the following output: https://paste.fedoraproject.org/paste/90D0k1AyVPGDbNhk1WxlBl5M1UNdIGYhyRLiv… Running `sudo make install` gives me the same errors. It seems otopi is failing to compile properly and as a result, running ./configure within the ovirt-host-deploy directory ends with an error saying otopi-devtools are missing. Documentation of my environment as it stands is here: https://github.com/leni1/oVirt-docs-Debian/blob/master/oVirt-Development-En… Any ideas on what I should try next are welcome. -- - Warm regards Leni Kadali Mutungi

6 14

Upgrade 4.0.6 to 4.1.1 -- How to Update oVirt Node (4.x) Hosts?
by Beckman, Daniel 09 May '17

09 May '17

--_000_99294B0B51BA4CA6B4F3169AC046B619ingramcontentcom_ Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: base64 U28gSSBzdWNjZXNzZnVsbHkgdXBncmFkZWQgbXkgZW5naW5lIGZyb20gNC4wNiB0byA0LjEuMSB3 aXRoIG5vIG1ham9yIGlzc3Vlcy4NCg0KQSBuaWNlIHRoaW5nIEkgbm90aWNlZCB3YXMgdGhhdCBt eSBjdXN0b20gQ0EgY2VydGlmaWNhdGUgZm9yIGh0dHBzIG9uIHRoZSBhZG1pbiBhbmQgdXNlciBw b3J0YWxzIHdhc27igJl0IGNsb2JiZXJlZCBieSBzZXR1cC4NCg0KSSBkaWQgaGF2ZSB0byByZXN0 b3JlIG15IGN1c3RvbSBzZXR0aW5ncyBmb3IgSVNPIHVwbG9hZGVyLCBsb2cgY29sbGVjdG9yLCBh bmQgd2Vic29ja2V0IHByb3h5Og0KY3AgL2V0Yy9vdmlydC1lbmdpbmUvaXNvdXBsb2FkZXIuY29u Zi5kLzEwLWVuZ2luZS1zZXR1cC5jb25mLjxsYXRlc3RfdGltZXN0YW1wPiAvZXRjL292aXJ0LWVu Z2luZS9pc291cGxvYWRlci5jb25mLmQvMTAtZW5naW5lLXNldHVwLmNvbmYNCmNwIC9ldGMvb3Zp cnQtZW5naW5lL292aXJ0LXdlYnNvY2tldC1wcm94eS5jb25mLmQvMTAtc2V0dXAuY29uZi48bGF0 ZXN0X3RpbWVzdGFtcD4gL2V0Yy9vdmlydC1lbmdpbmUvb3ZpcnQtd2Vic29ja2V0LXByb3h5LmNv bmYuZC8xMC1zZXR1cC5jb25mDQpjcCAvZXRjL292aXJ0LWVuZ2luZS9sb2djb2xsZWN0b3IuY29u Zi5kLzEwLWVuZ2luZS1zZXR1cC5jb25mLjxsYXRlc3RfdGltZXN0YW1wPiAvZXRjL292aXJ0LWVu Z2luZS9sb2djb2xsZWN0b3IuY29uZi5kLzEwLWVuZ2luZS1zZXR1cC5jb25mDQoNCk5vdyBJ4oCZ bSBtb3Zpbmcgb24gdG8gdXBkYXRpbmcgdGhlIG9WaXJ0IG5vZGUgaG9zdHMsIHdoaWNoIGFyZSBj dXJyZW50bHkgYXQgb1ZpcnQgTm9kZSA0LjAuNi4xLiAoSeKAmW0gYXNzdW1pbmcgSSBzaG91bGQg ZG8gdGhhdCBiZWZvcmUgYXR0ZW1wdGluZyB0byB1cGdyYWRlIHRoZSBjbHVzdGVyIGFuZCBkYXRh IGNlbnRlciBjb21wYXRpYmlsaXR5IGxldmVsIHRvIDQuMS4pDQoNCldoZW4gSSByaWdodC1jbGlj ayBvbiBhIGhvc3QgYW5kIGdvIHRvIEluc3RhbGxhdGlvbiAvIENoZWNrIGZvciBVcGdyYWRlLCB0 aGUgcmVzdWx0cyBhcmUg4oCYbm8gdXBkYXRlcyBmb3VuZC7igJkgV2hlbiBJIGxvZyBpbnRvIHRo YXQgaG9zdCBkaXJlY3RseSwgSSBub3RpY2UgaXTigJlzIHN0aWxsIGdvdCB0aGUgb1ZpcnQgNC4w IHJlcG8sIG5vdCA0LjEuIElzIHRoZXJlIGFuIGV4dHJhIHN0ZXAgSeKAmW0gbWlzc2luZz8gVGhl IGRvY3VtZW50YXRpb24gSeKAmXZlIGZvdW5kIChodHRwOi8vd3d3Lm92aXJ0Lm9yZy9kb2N1bWVu dGF0aW9uL3VwZ3JhZGUtZ3VpZGUvY2hhcC1VcGRhdGVzX2JldHdlZW5fTWlub3JfUmVsZWFzZXMv KSBkb2VzbuKAmXQgbWVudGlvbiB0aGlzLg0KDQoNCioqDQpJZiBJIGNhbiBvZmZlciBzb21lIHVu c29saWNpdGVkIGZlZWRiYWNrOiBJIGZlZWwgbGlrZSB0aGlzIGxpc3QgaXMgcG9wdWxhdGVkIHdp dGggYSBsb3Qgb2YgcXVlc3Rpb25zIHRoYXQgY291bGQgYmUgYXZlcnRlZCB3aXRoIGEgbGl0dGxl IGNhcmUgYW5kIGZlZWRpbmcgb2YgdGhlIGRvY3VtZW50YXRpb24uIEl04oCZcyB1bmZvcnR1bmF0 ZSBiZWNhdXNlIHRoYXQgbWFrZXMgZm9yIGEgcm9ja3kgaW50cm9kdWN0aW9uIHRvIG9WaXJ0LCBh bmQgaXQgbWFrZXMgaXQgbG9vayBsaWtlIGEgbmVnbGVjdGVkIHByb2plY3QsIHdoaWNoIEkga25v dyBpcyBub3QgdGhlIGNhc2UuDQoNCk9uIGEgcmVsYXRlZCBub3RlLCBJIGtub3cgdGhpcyBoYXMg YmVlbiBkaXNjdXNzZWQgYmVmb3JlIGJ1dOKApg0KVGhlIGNlbnRyYWxpemVkIGNvbnRyb2wgaW4g R2l0aHViIGZvciB0aGUgZG9jdW1lbnRhdGlvbiBkb2VzIG5vdCByZWFsbHkgZW5jb3VyYWdlIHVz ZXIgY29udHJpYnV0aW9ucy4gV2hhdOKAmXMgd3Jvbmcgd2l0aCBhIHdpa2k/IElmIHdl4oCZcmUg cmVhbGx5IGNvbmNlcm5lZCBhYm91dCBiYWQgb3IgbWFsaWNpb3VzIGVkaXRzIGJlaW5nIHBvc3Rl ZCwga2VlcCB0aGUgb2ZmaWNpYWwgaW4gZ2l0IGFuZCBhZGQgYSBzZXBhcmF0ZSB3aWtpIHRoYXQg aXMgY2xlYXJseSBtYXJrZWQgYXMgdXNlci1jb250cmlidXRlZC4NCioqDQoNCg0KVGhhbmtzLA0K RGFuaWVsDQo= --_000_99294B0B51BA4CA6B4F3169AC046B619ingramcontentcom_ Content-Type: text/html; charset=UTF-8 Content-ID: <A36A61E118072E419909BC293B56461B(a)namprd12.prod.outlook.com> Content-Transfer-Encoding: base64 PGh0bWwgeG1sbnM6bz0idXJuOnNjaGVtYXMtbWljcm9zb2Z0LWNvbTpvZmZpY2U6b2ZmaWNlIiB4 bWxuczp3PSJ1cm46c2NoZW1hcy1taWNyb3NvZnQtY29tOm9mZmljZTp3b3JkIiB4bWxuczptPSJo dHRwOi8vc2NoZW1hcy5taWNyb3NvZnQuY29tL29mZmljZS8yMDA0LzEyL29tbWwiIHhtbG5zPSJo dHRwOi8vd3d3LnczLm9yZy9UUi9SRUMtaHRtbDQwIj4NCjxoZWFkPg0KPG1ldGEgaHR0cC1lcXVp dj0iQ29udGVudC1UeXBlIiBjb250ZW50PSJ0ZXh0L2h0bWw7IGNoYXJzZXQ9dXRmLTgiPg0KPG1l dGEgbmFtZT0iVGl0bGUiIGNvbnRlbnQ9IiI+DQo8bWV0YSBuYW1lPSJLZXl3b3JkcyIgY29udGVu dD0iIj4NCjxtZXRhIG5hbWU9IkdlbmVyYXRvciIgY29udGVudD0iTWljcm9zb2Z0IFdvcmQgMTUg KGZpbHRlcmVkIG1lZGl1bSkiPg0KPHN0eWxlPjwhLS0NCi8qIEZvbnQgRGVmaW5pdGlvbnMgKi8N CkBmb250LWZhY2UNCgl7Zm9udC1mYW1pbHk6IkNhbWJyaWEgTWF0aCI7DQoJcGFub3NlLTE6MiA0 IDUgMyA1IDQgNiAzIDIgNDt9DQpAZm9udC1mYWNlDQoJe2ZvbnQtZmFtaWx5OkNhbGlicmk7DQoJ cGFub3NlLTE6MiAxNSA1IDIgMiAyIDQgMyAyIDQ7fQ0KLyogU3R5bGUgRGVmaW5pdGlvbnMgKi8N CnAuTXNvTm9ybWFsLCBsaS5Nc29Ob3JtYWwsIGRpdi5Nc29Ob3JtYWwNCgl7bWFyZ2luOjBpbjsN CgltYXJnaW4tYm90dG9tOi4wMDAxcHQ7DQoJZm9udC1zaXplOjEyLjBwdDsNCglmb250LWZhbWls eTpDYWxpYnJpO30NCmE6bGluaywgc3Bhbi5Nc29IeXBlcmxpbmsNCgl7bXNvLXN0eWxlLXByaW9y aXR5Ojk5Ow0KCWNvbG9yOiMwNTYzQzE7DQoJdGV4dC1kZWNvcmF0aW9uOnVuZGVybGluZTt9DQph OnZpc2l0ZWQsIHNwYW4uTXNvSHlwZXJsaW5rRm9sbG93ZWQNCgl7bXNvLXN0eWxlLXByaW9yaXR5 Ojk5Ow0KCWNvbG9yOiM5NTRGNzI7DQoJdGV4dC1kZWNvcmF0aW9uOnVuZGVybGluZTt9DQpzcGFu LkVtYWlsU3R5bGUxNw0KCXttc28tc3R5bGUtdHlwZTpwZXJzb25hbC1jb21wb3NlOw0KCWZvbnQt ZmFtaWx5OkNhbGlicmk7DQoJY29sb3I6d2luZG93dGV4dDt9DQouTXNvQ2hwRGVmYXVsdA0KCXtt c28tc3R5bGUtdHlwZTpleHBvcnQtb25seTsNCglmb250LWZhbWlseTpDYWxpYnJpO30NCkBwYWdl IFdvcmRTZWN0aW9uMQ0KCXtzaXplOjguNWluIDExLjBpbjsNCgltYXJnaW46MS4waW4gMS4waW4g MS4waW4gMS4waW47fQ0KZGl2LldvcmRTZWN0aW9uMQ0KCXtwYWdlOldvcmRTZWN0aW9uMTt9DQot LT48L3N0eWxlPg0KPC9oZWFkPg0KPGJvZHkgYmdjb2xvcj0id2hpdGUiIGxhbmc9IkVOLVVTIiBs aW5rPSIjMDU2M0MxIiB2bGluaz0iIzk1NEY3MiI+DQo8ZGl2IGNsYXNzPSJXb3JkU2VjdGlvbjEi Pg0KPHAgY2xhc3M9Ik1zb05vcm1hbCI+PHNwYW4gc3R5bGU9ImZvbnQtc2l6ZToxMS4wcHQiPlNv IEkgc3VjY2Vzc2Z1bGx5IHVwZ3JhZGVkIG15IGVuZ2luZSBmcm9tIDQuMDYgdG8gNC4xLjEgd2l0 aCBubyBtYWpvciBpc3N1ZXMuDQo8bzpwPjwvbzpwPjwvc3Bhbj48L3A+DQo8cCBjbGFzcz0iTXNv Tm9ybWFsIj48c3BhbiBzdHlsZT0iZm9udC1zaXplOjExLjBwdCI+PG86cD4mbmJzcDs8L286cD48 L3NwYW4+PC9wPg0KPHAgY2xhc3M9Ik1zb05vcm1hbCI+PHNwYW4gc3R5bGU9ImZvbnQtc2l6ZTox MS4wcHQiPkEgbmljZSB0aGluZyBJIG5vdGljZWQgd2FzIHRoYXQgbXkgY3VzdG9tIENBIGNlcnRp ZmljYXRlIGZvciBodHRwcyBvbiB0aGUgYWRtaW4gYW5kIHVzZXIgcG9ydGFscyB3YXNu4oCZdCBj bG9iYmVyZWQgYnkgc2V0dXAuDQo8bzpwPjwvbzpwPjwvc3Bhbj48L3A+DQo8cCBjbGFzcz0iTXNv Tm9ybWFsIj48c3BhbiBzdHlsZT0iZm9udC1zaXplOjExLjBwdCI+PG86cD4mbmJzcDs8L286cD48 L3NwYW4+PC9wPg0KPHAgY2xhc3M9Ik1zb05vcm1hbCI+PHNwYW4gc3R5bGU9ImZvbnQtc2l6ZTox MS4wcHQiPkkgZGlkIGhhdmUgdG8gcmVzdG9yZSBteSBjdXN0b20gc2V0dGluZ3MgZm9yIElTTyB1 cGxvYWRlciwgbG9nIGNvbGxlY3RvciwgYW5kIHdlYnNvY2tldCBwcm94eTo8bzpwPjwvbzpwPjwv c3Bhbj48L3A+DQo8cCBjbGFzcz0iTXNvTm9ybWFsIj48c3BhbiBzdHlsZT0iZm9udC1zaXplOjEx LjBwdCI+Y3AmbmJzcDsvZXRjL292aXJ0LWVuZ2luZS9pc291cGxvYWRlci5jb25mLmQvMTAtZW5n aW5lLXNldHVwLmNvbmYuJmx0O2xhdGVzdF90aW1lc3RhbXAmZ3Q7IC9ldGMvb3ZpcnQtZW5naW5l L2lzb3VwbG9hZGVyLmNvbmYuZC8xMC1lbmdpbmUtc2V0dXAuY29uZjxvOnA+PC9vOnA+PC9zcGFu PjwvcD4NCjxwIGNsYXNzPSJNc29Ob3JtYWwiPjxzcGFuIHN0eWxlPSJmb250LXNpemU6MTEuMHB0 Ij5jcCZuYnNwOy9ldGMvb3ZpcnQtZW5naW5lL292aXJ0LXdlYnNvY2tldC1wcm94eS5jb25mLmQv MTAtc2V0dXAuY29uZi4mbHQ7bGF0ZXN0X3RpbWVzdGFtcCZndDsgL2V0Yy9vdmlydC1lbmdpbmUv b3ZpcnQtd2Vic29ja2V0LXByb3h5LmNvbmYuZC8xMC1zZXR1cC5jb25mPG86cD48L286cD48L3Nw YW4+PC9wPg0KPHAgY2xhc3M9Ik1zb05vcm1hbCI+PHNwYW4gc3R5bGU9ImZvbnQtc2l6ZToxMS4w cHQiPmNwJm5ic3A7L2V0Yy9vdmlydC1lbmdpbmUvbG9nY29sbGVjdG9yLmNvbmYuZC8xMC1lbmdp bmUtc2V0dXAuY29uZi4mbHQ7bGF0ZXN0X3RpbWVzdGFtcCZndDsgL2V0Yy9vdmlydC1lbmdpbmUv bG9nY29sbGVjdG9yLmNvbmYuZC8xMC1lbmdpbmUtc2V0dXAuY29uZjxvOnA+PC9vOnA+PC9zcGFu PjwvcD4NCjxwIGNsYXNzPSJNc29Ob3JtYWwiPjxzcGFuIHN0eWxlPSJmb250LXNpemU6MTEuMHB0 Ij48bzpwPiZuYnNwOzwvbzpwPjwvc3Bhbj48L3A+DQo8cCBjbGFzcz0iTXNvTm9ybWFsIj48c3Bh biBzdHlsZT0iZm9udC1zaXplOjExLjBwdCI+Tm93IEnigJltIG1vdmluZyBvbiB0byB1cGRhdGlu ZyB0aGUgb1ZpcnQgbm9kZSBob3N0cywgd2hpY2ggYXJlIGN1cnJlbnRseSBhdCBvVmlydCBOb2Rl IDQuMC42LjEuIChJ4oCZbSBhc3N1bWluZyBJIHNob3VsZCBkbyB0aGF0IGJlZm9yZSBhdHRlbXB0 aW5nIHRvIHVwZ3JhZGUgdGhlIGNsdXN0ZXIgYW5kIGRhdGEgY2VudGVyIGNvbXBhdGliaWxpdHkg bGV2ZWwgdG8NCiA0LjEuKTxvOnA+PC9vOnA+PC9zcGFuPjwvcD4NCjxwIGNsYXNzPSJNc29Ob3Jt YWwiPjxzcGFuIHN0eWxlPSJmb250LXNpemU6MTEuMHB0Ij48bzpwPiZuYnNwOzwvbzpwPjwvc3Bh bj48L3A+DQo8cCBjbGFzcz0iTXNvTm9ybWFsIj48c3BhbiBzdHlsZT0iZm9udC1zaXplOjExLjBw dCI+V2hlbiBJIHJpZ2h0LWNsaWNrIG9uIGEgaG9zdCBhbmQgZ28gdG8gSW5zdGFsbGF0aW9uIC8g Q2hlY2sgZm9yIFVwZ3JhZGUsIHRoZSByZXN1bHRzIGFyZSDigJhubyB1cGRhdGVzIGZvdW5kLuKA mSBXaGVuIEkgbG9nIGludG8gdGhhdCBob3N0IGRpcmVjdGx5LCBJIG5vdGljZSBpdOKAmXMgc3Rp bGwgZ290IHRoZSBvVmlydCA0LjAgcmVwbywgbm90IDQuMS4gSXMgdGhlcmUNCiBhbiBleHRyYSBz dGVwIEnigJltIG1pc3Npbmc/IFRoZSBkb2N1bWVudGF0aW9uIEnigJl2ZSBmb3VuZCAoPGEgaHJl Zj0iaHR0cDovL3d3dy5vdmlydC5vcmcvZG9jdW1lbnRhdGlvbi91cGdyYWRlLWd1aWRlL2NoYXAt VXBkYXRlc19iZXR3ZWVuX01pbm9yX1JlbGVhc2VzLykiPmh0dHA6Ly93d3cub3ZpcnQub3JnL2Rv Y3VtZW50YXRpb24vdXBncmFkZS1ndWlkZS9jaGFwLVVwZGF0ZXNfYmV0d2Vlbl9NaW5vcl9SZWxl YXNlcy8pPC9hPiBkb2VzbuKAmXQgbWVudGlvbg0KIHRoaXMuIDxvOnA+PC9vOnA+PC9zcGFuPjwv cD4NCjxwIGNsYXNzPSJNc29Ob3JtYWwiPjxzcGFuIHN0eWxlPSJmb250LXNpemU6MTEuMHB0Ij48 bzpwPiZuYnNwOzwvbzpwPjwvc3Bhbj48L3A+DQo8cCBjbGFzcz0iTXNvTm9ybWFsIj48c3BhbiBz dHlsZT0iZm9udC1zaXplOjExLjBwdCI+PG86cD4mbmJzcDs8L286cD48L3NwYW4+PC9wPg0KPHAg Y2xhc3M9Ik1zb05vcm1hbCI+PHNwYW4gc3R5bGU9ImZvbnQtc2l6ZToxMS4wcHQiPioqPG86cD48 L286cD48L3NwYW4+PC9wPg0KPHAgY2xhc3M9Ik1zb05vcm1hbCI+PHNwYW4gc3R5bGU9ImZvbnQt c2l6ZToxMS4wcHQiPklmIEkgY2FuIG9mZmVyIHNvbWUgdW5zb2xpY2l0ZWQgZmVlZGJhY2s6IEkg ZmVlbCBsaWtlIHRoaXMgbGlzdCBpcyBwb3B1bGF0ZWQgd2l0aCBhIGxvdCBvZiBxdWVzdGlvbnMg dGhhdCBjb3VsZCBiZSBhdmVydGVkIHdpdGggYSBsaXR0bGUgY2FyZSBhbmQgZmVlZGluZyBvZiB0 aGUgZG9jdW1lbnRhdGlvbi4gSXTigJlzIHVuZm9ydHVuYXRlIGJlY2F1c2UgdGhhdA0KIG1ha2Vz IGZvciBhIHJvY2t5IGludHJvZHVjdGlvbiB0byBvVmlydCwgYW5kIGl0IG1ha2VzIGl0IGxvb2sg bGlrZSBhIG5lZ2xlY3RlZCBwcm9qZWN0LCB3aGljaCBJIGtub3cgaXMgbm90IHRoZSBjYXNlLg0K PG86cD48L286cD48L3NwYW4+PC9wPg0KPHAgY2xhc3M9Ik1zb05vcm1hbCI+PHNwYW4gc3R5bGU9 ImZvbnQtc2l6ZToxMS4wcHQiPjxvOnA+Jm5ic3A7PC9vOnA+PC9zcGFuPjwvcD4NCjxwIGNsYXNz PSJNc29Ob3JtYWwiPjxzcGFuIHN0eWxlPSJmb250LXNpemU6MTEuMHB0Ij5PbiBhIHJlbGF0ZWQg bm90ZSwgSSBrbm93IHRoaXMgaGFzIGJlZW4gZGlzY3Vzc2VkIGJlZm9yZSBidXTigKY8bzpwPjwv bzpwPjwvc3Bhbj48L3A+DQo8cCBjbGFzcz0iTXNvTm9ybWFsIj48c3BhbiBzdHlsZT0iZm9udC1z aXplOjExLjBwdCI+VGhlIGNlbnRyYWxpemVkIGNvbnRyb2wgaW4gR2l0aHViIGZvciB0aGUgZG9j dW1lbnRhdGlvbiBkb2VzIG5vdCByZWFsbHkgZW5jb3VyYWdlIHVzZXIgY29udHJpYnV0aW9ucy4g V2hhdOKAmXMgd3Jvbmcgd2l0aCBhIHdpa2k/IElmIHdl4oCZcmUgcmVhbGx5IGNvbmNlcm5lZCBh Ym91dCBiYWQgb3IgbWFsaWNpb3VzIGVkaXRzIGJlaW5nIHBvc3RlZCwga2VlcCB0aGUNCiBvZmZp Y2lhbCBpbiBnaXQgYW5kIGFkZCBhIHNlcGFyYXRlIHdpa2kgdGhhdCBpcyBjbGVhcmx5IG1hcmtl ZCBhcyB1c2VyLWNvbnRyaWJ1dGVkLjxvOnA+PC9vOnA+PC9zcGFuPjwvcD4NCjxwIGNsYXNzPSJN c29Ob3JtYWwiPjxzcGFuIHN0eWxlPSJmb250LXNpemU6MTEuMHB0Ij4qKjxvOnA+PC9vOnA+PC9z cGFuPjwvcD4NCjxwIGNsYXNzPSJNc29Ob3JtYWwiPjxzcGFuIHN0eWxlPSJmb250LXNpemU6MTEu MHB0Ij48bzpwPiZuYnNwOzwvbzpwPjwvc3Bhbj48L3A+DQo8cCBjbGFzcz0iTXNvTm9ybWFsIj48 c3BhbiBzdHlsZT0iZm9udC1zaXplOjExLjBwdCI+PG86cD4mbmJzcDs8L286cD48L3NwYW4+PC9w Pg0KPHAgY2xhc3M9Ik1zb05vcm1hbCI+PHNwYW4gc3R5bGU9ImZvbnQtc2l6ZToxMS4wcHQiPlRo YW5rcyw8bzpwPjwvbzpwPjwvc3Bhbj48L3A+DQo8cCBjbGFzcz0iTXNvTm9ybWFsIj48c3BhbiBz dHlsZT0iZm9udC1zaXplOjExLjBwdCI+RGFuaWVsPG86cD48L286cD48L3NwYW4+PC9wPg0KPC9k aXY+DQo8L2JvZHk+DQo8L2h0bWw+DQo= --_000_99294B0B51BA4CA6B4F3169AC046B619ingramcontentcom_--

3 19

Hosted engine FCP SAN can not activate data domain
by Jens Oechsler 09 May '17

09 May '17

Hello I have a problem with oVirt Hosted Engine Setup version: 4.0.5.5-1.el7.centos. Setup is using FCP SAN for data and engine. Cluster has worked fine for a while. It has two hosts with VMs running. I extended storage with an additional LUN recently. This LUN seems to be gone from data domain and one VM is paused which I assume has data on that device. Got these errors in events: Apr 24, 2017 10:26:05 AM Failed to activate Storage Domain SD (Data Center DC) by admin@internal-authz Apr 10, 2017 3:38:08 PM Status of host cl01 was set to Up. Apr 10, 2017 3:38:03 PM Host cl01 does not enforce SELinux. Current status: DISABLED Apr 10, 2017 3:37:58 PM Host cl01 is initializing. Message: Recovering from crash or Initializing Apr 10, 2017 3:37:58 PM VDSM cl01 command failed: Recovering from crash or Initializing Apr 10, 2017 3:37:46 PM Failed to Reconstruct Master Domain for Data Center DC. Apr 10, 2017 3:37:46 PM Host cl01 is not responding. Host cannot be fenced automatically because power management for the host is disabled. Apr 10, 2017 3:37:46 PM VDSM cl01 command failed: Broken pipe Apr 10, 2017 3:37:46 PM VDSM cl01 command failed: Broken pipe Apr 10, 2017 3:32:45 PM Invalid status on Data Center DC. Setting Data Center status to Non Responsive (On host cl01, Error: General Exception). Apr 10, 2017 3:32:45 PM VDSM cl01 command failed: [Errno 19] Could not find dm device named `[unknown]` Apr 7, 2017 1:28:04 PM VM HostedEngine is down with error. Exit message: resource busy: Failed to acquire lock: error -243. Apr 7, 2017 1:28:02 PM Storage Pool Manager runs on Host cl01 (Address: cl01). Apr 7, 2017 1:27:59 PM Invalid status on Data Center DC. Setting status to Non Responsive. Apr 7, 2017 1:27:53 PM Host cl02 does not enforce SELinux. Current status: DISABLED Apr 7, 2017 1:27:52 PM Host cl01 does not enforce SELinux. Current status: DISABLED Apr 7, 2017 1:27:49 PM Affinity Rules Enforcement Manager started. Apr 7, 2017 1:27:34 PM ETL Service Started Apr 7, 2017 1:26:01 PM ETL Service Stopped Apr 3, 2017 1:22:54 PM Shutdown of VM HostedEngine failed. Apr 3, 2017 1:22:52 PM Storage Pool Manager runs on Host cl01 (Address: cl01). Apr 3, 2017 1:22:49 PM Invalid status on Data Center DC. Setting status to Non Responsive. Master data domain is inactive. vdsm.log: jsonrpc.Executor/5::INFO::2017-04-20 07:01:26,796::lvm::1226::Storage.LVM::(activateLVs) Refreshing lvs: vg=bd616961-6da7-4eb0-939e-330b0a3fea6e lvs=['ids'] jsonrpc.Executor/5::DEBUG::2017-04-20 07:01:26,796::lvm::288::Storage.Misc.excCmd::(cmd) /usr/bin/taskset --cpu-list 0-39 /usr/bin/sudo -n /usr/sbin/lvm lvchange --config ' devices { preferred_names = ["^/dev/mapper/"] ignore_suspended_d evices=1 write_cache_state=0 disable_after_error_count=3 filter = [ '\''a|/dev/mapper/360050768018182b6c00000000000099e|[unknown]|'\'', '\''r|.*|'\'' ] } global { locking_type=1 prioritise_write_locks=1 wait_for_locks=1 use_lvmetad= 0 } backup { retain_min = 50 retain_days = 0 } ' --refresh bd616961-6da7-4eb0-939e-330b0a3fea6e/ids (cwd None) jsonrpc.Executor/5::DEBUG::2017-04-20 07:01:26,880::lvm::288::Storage.Misc.excCmd::(cmd) SUCCESS: <err> = " WARNING: Not using lvmetad because config setting use_lvmetad=0.\n WARNING: To avoid corruption, rescan devices to make changes visible (pvscan --cache).\n Couldn't find device with uuid jDB9VW-bNqY-UIKc-XxXp-xnyK-ZTlt-7Cpa1U.\n"; <rc> = 0 jsonrpc.Executor/5::INFO::2017-04-20 07:01:26,881::lvm::1226::Storage.LVM::(activateLVs) Refreshing lvs: vg=bd616961-6da7-4eb0-939e-330b0a3fea6e lvs=['leases'] jsonrpc.Executor/5::DEBUG::2017-04-20 07:01:26,881::lvm::288::Storage.Misc.excCmd::(cmd) /usr/bin/taskset --cpu-list 0-39 /usr/bin/sudo -n /usr/sbin/lvm lvchange --config ' devices { preferred_names = ["^/dev/mapper/"] ignore_suspended_d evices=1 write_cache_state=0 disable_after_error_count=3 filter = [ '\''a|/dev/mapper/360050768018182b6c00000000000099e|[unknown]|'\'', '\''r|.*|'\'' ] } global { locking_type=1 prioritise_write_locks=1 wait_for_locks=1 use_lvmetad= 0 } backup { retain_min = 50 retain_days = 0 } ' --refresh bd616961-6da7-4eb0-939e-330b0a3fea6e/leases (cwd None) jsonrpc.Executor/5::DEBUG::2017-04-20 07:01:26,973::lvm::288::Storage.Misc.excCmd::(cmd) SUCCESS: <err> = " WARNING: Not using lvmetad because config setting use_lvmetad=0.\n WARNING: To avoid corruption, rescan devices to make changes visible (pvscan --cache).\n Couldn't find device with uuid jDB9VW-bNqY-UIKc-XxXp-xnyK-ZTlt-7Cpa1U.\n"; <rc> = 0 jsonrpc.Executor/5::INFO::2017-04-20 07:01:26,973::lvm::1226::Storage.LVM::(activateLVs) Refreshing lvs: vg=bd616961-6da7-4eb0-939e-330b0a3fea6e lvs=['metadata', 'leases', 'ids', 'inbox', 'outbox', 'master'] jsonrpc.Executor/5::DEBUG::2017-04-20 07:01:26,974::lvm::288::Storage.Misc.excCmd::(cmd) /usr/bin/taskset --cpu-list 0-39 /usr/bin/sudo -n /usr/sbin/lvm lvchange --config ' devices { preferred_names = ["^/dev/mapper/"] ignore_suspended_d evices=1 write_cache_state=0 disable_after_error_count=3 filter = [ '\''a|/dev/mapper/360050768018182b6c00000000000099e|[unknown]|'\'', '\''r|.*|'\'' ] } global { locking_type=1 prioritise_write_locks=1 wait_for_locks=1 use_lvmetad= 0 } backup { retain_min = 50 retain_days = 0 } ' --refresh bd616961-6da7-4eb0-939e-330b0a3fea6e/metadata bd616961-6da7-4eb0-939e-330b0a3fea6e/leases bd616961-6da7-4eb0-939e-330b0a3fea6e/ids bd616961-6da7-4eb0-939e-330b0a3fea6e/inbox b d616961-6da7-4eb0-939e-330b0a3fea6e/outbox bd616961-6da7-4eb0-939e-330b0a3fea6e/master (cwd None) Reactor thread::INFO::2017-04-20 07:01:27,069::protocoldetector::72::ProtocolDetector.AcceptorImpl::(handle_accept) Accepting connection from ::1:44692 jsonrpc.Executor/5::DEBUG::2017-04-20 07:01:27,070::lvm::288::Storage.Misc.excCmd::(cmd) SUCCESS: <err> = " WARNING: Not using lvmetad because config setting use_lvmetad=0.\n WARNING: To avoid corruption, rescan devices to make changes visible (pvscan --cache).\n Couldn't find device with uuid jDB9VW-bNqY-UIKc-XxXp-xnyK-ZTlt-7Cpa1U.\n"; <rc> = 0 jsonrpc.Executor/5::DEBUG::2017-04-20 07:01:27,070::sp::662::Storage.StoragePool::(_stopWatchingDomainsState) Stop watching domains state jsonrpc.Executor/5::DEBUG::2017-04-20 07:01:27,070::resourceManager::628::Storage.ResourceManager::(releaseResource) Trying to release resource 'Storage.58493e81-01dc-01d8-0390-000000000032' jsonrpc.Executor/5::DEBUG::2017-04-20 07:01:27,071::resourceManager::647::Storage.ResourceManager::(releaseResource) Released resource 'Storage.58493e81-01dc-01d8-0390-000000000032' (0 active users) jsonrpc.Executor/5::DEBUG::2017-04-20 07:01:27,071::resourceManager::653::Storage.ResourceManager::(releaseResource) Resource 'Storage.58493e81-01dc-01d8-0390-000000000032' is free, finding out if anyone is waiting for it. jsonrpc.Executor/5::DEBUG::2017-04-20 07:01:27,071::resourceManager::661::Storage.ResourceManager::(releaseResource) No one is waiting for resource 'Storage.58493e81-01dc-01d8-0390-000000000032', Clearing records. jsonrpc.Executor/5::DEBUG::2017-04-20 07:01:27,071::resourceManager::628::Storage.ResourceManager::(releaseResource) Trying to release resource 'Storage.HsmDomainMonitorLock' jsonrpc.Executor/5::DEBUG::2017-04-20 07:01:27,071::resourceManager::647::Storage.ResourceManager::(releaseResource) Released resource 'Storage.HsmDomainMonitorLock' (0 active users) jsonrpc.Executor/5::DEBUG::2017-04-20 07:01:27,071::resourceManager::653::Storage.ResourceManager::(releaseResource) Resource 'Storage.HsmDomainMonitorLock' is free, finding out if anyone is waiting for it. jsonrpc.Executor/5::DEBUG::2017-04-20 07:01:27,071::resourceManager::661::Storage.ResourceManager::(releaseResource) No one is waiting for resource 'Storage.HsmDomainMonitorLock', Clearing records. jsonrpc.Executor/5::ERROR::2017-04-20 07:01:27,072::task::868::Storage.TaskManager.Task::(_setError) Task=`15122a21-4fb7-45bf-9a9a-4b97f27bc1e1`::Unexpected error Traceback (most recent call last): File "/usr/share/vdsm/storage/task.py", line 875, in _run return fn(*args, **kargs) File "/usr/lib/python2.7/site-packages/vdsm/logUtils.py", line 50, in wrapper res = f(*args, **kwargs) File "/usr/share/vdsm/storage/hsm.py", line 988, in connectStoragePool spUUID, hostID, msdUUID, masterVersion, domainsMap) File "/usr/share/vdsm/storage/hsm.py", line 1053, in _connectStoragePool res = pool.connect(hostID, msdUUID, masterVersion) File "/usr/share/vdsm/storage/sp.py", line 646, in connect self.__rebuild(msdUUID=msdUUID, masterVersion=masterVersion) File "/usr/share/vdsm/storage/sp.py", line 1219, in __rebuild self.setMasterDomain(msdUUID, masterVersion) File "/usr/share/vdsm/storage/sp.py", line 1427, in setMasterDomain domain = sdCache.produce(msdUUID) File "/usr/share/vdsm/storage/sdc.py", line 101, in produce domain.getRealDomain() File "/usr/share/vdsm/storage/sdc.py", line 53, in getRealDomain return self._cache._realProduce(self._sdUUID) File "/usr/share/vdsm/storage/sdc.py", line 125, in _realProduce domain = self._findDomain(sdUUID) File "/usr/share/vdsm/storage/sdc.py", line 144, in _findDomain dom = findMethod(sdUUID) File "/usr/share/vdsm/storage/blockSD.py", line 1441, in findDomain return BlockStorageDomain(BlockStorageDomain.findDomainPath(sdUUID)) File "/usr/share/vdsm/storage/blockSD.py", line 814, in __init__ lvm.checkVGBlockSizes(sdUUID, (self.logBlkSize, self.phyBlkSize)) File "/usr/share/vdsm/storage/lvm.py", line 1056, in checkVGBlockSizes _checkpvsblksize(pvs, vgBlkSize) File "/usr/share/vdsm/storage/lvm.py", line 1033, in _checkpvsblksize pvBlkSize = _getpvblksize(pv) File "/usr/share/vdsm/storage/lvm.py", line 1027, in _getpvblksize dev = devicemapper.getDmId(os.path.basename(pv)) File "/usr/share/vdsm/storage/devicemapper.py", line 40, in getDmId deviceMultipathName) OSError: [Errno 19] Could not find dm device named `[unknown]` Any input how to diagnose or troubleshoot would be appreciated. -- Best Regards Jens Oechsler

2 5

[oVirt4.1] Does oVirt 4.1 support iSCSI offload?
by wodel youchi 07 May '17

07 May '17

Hi, We have two hypervisors, each one has a 10Gbe nic card with two ports, the cards support iSCSI offload. Does oVirt 4.1 support this? if yes how can someone use it on hosted-engine deployment? the VM engine will be in the SAN targeted by these cards. Regards. <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> Virus-free. www.avast.com <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

3 4

Change DNS Server
by Kai Wagner 06 May '17

06 May '17

This is an OpenPGP/MIME signed message (RFC 4880 and 3156) --Ck3WecahvXJaUfA9994GcjRewKPgnskLx Content-Type: multipart/mixed; boundary="R85rSQvBINNVM8UjrG2weAQEIeXGVwVMH"; protected-headers="v1" From: Kai Wagner <kwagner(a)suse.com> To: users(a)ovirt.org Message-ID: <282bf3c4-662c-c871-a495-cad2e540a311(a)suse.com> Subject: Change DNS Server --R85rSQvBINNVM8UjrG2weAQEIeXGVwVMH Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: quoted-printable Hi, where can I change the dns server for my hosts? I know the DNS entry is part of the ifcfg-* file, but I tried to change it there and after a reboot the old entry was restored from anywhere. Kai --=20 SUSE Linux GmbH, GF: Felix Imend=C3=B6rffer, Jane Smithard, Graham Norton= , HRB 21284 (AG N=C3=BCrnberg) --R85rSQvBINNVM8UjrG2weAQEIeXGVwVMH-- --Ck3WecahvXJaUfA9994GcjRewKPgnskLx Content-Type: application/pgp-signature; name="signature.asc" Content-Description: OpenPGP digital signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQEcBAEBAgAGBQJY9dKrAAoJEB6MkVYW48RuWuMIAIPFlOXp+ah56n3MlF7t6zJq nlYYbS8JrIX9vo8T9+J4b0qX0RwR0g0TPxP2IzlmFZXTs3nc4r9dhOprFdS0XWKR 52z9S4Mx8BpWJ12HLAqlo5XjeXH/USS7Rc3oD+2t9ZJzA8/ljJ9pLATa/iGzDOcF 1aSHmB/cc+549xNVaOMpS4g8JJJPszmGUMYd3b2Mhquu2iAhhrLu2ZTBjvYhq6IC 6CM7PrDDVjJhi5T3MocHRamLPj6xkfAPEAKvZ3zV3frlpTptTJ4PmEzLcqZ7Tcm+ LTDq4r7gihudFvQ+oOrQKJFtOroZZ8GJ0pgLP86SrY5zlSXmFGkG3Ate64khEAc= =Lka2 -----END PGP SIGNATURE----- --Ck3WecahvXJaUfA9994GcjRewKPgnskLx--

2 3

log out event but not log in?
by Gianluca Cecchi 05 May '17

05 May '17

Hello, In oVirt 4.1 web admin gui I see events about users logging out (they have been created on internal domain with ovirt-aaa-jdbc-tool command), but I don't see the corresponding log in event. The same is true for the default admin@internal user. Is there any reason or is it a bug? Thanks, Gianluca

4 6

Hosted engine already imported
by Jamie Lawrence 04 May '17

04 May '17

Hi all, In my hopefully-near-complete quest to automate Ovirt configuration in our environment, I’m very close. One outstanding issue that remains is that, even though the hosted engine storage domain actually was imported and shows in the GUI, some part of Ovirt appears to think that hasn’t happened yet. In the GUI, a periodic error is logged: “The Hosted Engine Storage Domain doesn’t exist. It will be imported automatically…” In engine.log, all I’m seeing that appears relevant is: 2017-04-25 10:28:57,988-07 INFO [org.ovirt.engine.core.bll.storage.domain.ImportHostedEngineStorageDomainCommand] (org.ovirt.thread.pool-6-thread-9) [1e44dde0] Lock Acquired to object 'EngineLock:{exclusiveLocks='[]', sharedLocks='null'}' 2017-04-25 10:28:57,992-07 WARN [org.ovirt.engine.core.bll.storage.domain.ImportHostedEngineStorageDomainCommand] (org.ovirt.thread.pool-6-thread-9) [1e44dde0] Validation of action 'ImportHostedEngineStorageDomain' failed for user SYSTEM. Reasons: VAR__ACTION__ADD,VAR__TYPE__STORAGE__DOMAIN,ACTION_TYPE_FAILED_STORAGE_DOMAIN_ALREADY_EXIST 2017-04-25 10:28:57,992-07 INFO [org.ovirt.engine.core.bll.storage.domain.ImportHostedEngineStorageDomainCommand] (org.ovirt.thread.pool-6-thread-9) [1e44dde0] Lock freed to object 'EngineLock:{exclusiveLocks='[]', sharedLocks='null’}’ Otherwise the log is pretty clean. I saw nothing of interest in the Gluster logs or the hosted-engine-ha logs on the host it is running on. It appears harmless, but then we aren’t actually using these systems yet, and in any case we don’t want the error spamming the log forever. This is 4.1.1.8-1.el7.centos, hosted engine on Centos 7.6.1311, Gluster for both the hosted engine and general data domains. Has anyone seen this before? Thanks in advance, -j

3 8

Ovirt tasks "stuck"
by Jim Kusznir 04 May '17

04 May '17

Hi: A few days ago I attempted to create a new VM from one of the ovirt-image-repository images. I haven't really figured out how to use this reliably yet, and in this case, while trying to import an image, one of my nodes spontaneously rebooted (or at least, it looked like that to ovirt...Not sure if it had an OOM issue or something else). I assume it was the node that got the task of importing those images, as ever since then (several days now), on my management screen under "Tasks" it shows the attempted imports, still stuck in "processing". I'm quite certain its not actually processing. I do believe it used some of my storage up in the partially downloaded images, though (they do show up as GlanceDisk-<numbers>, with a status of "Locked" under the main Disks tab. How do I "properly" recover from this (abort the task and delete the partial download)? Thanks! --Jim

3 4

Error importing old NFS storage domain
by Endre Karlson 03 May '17

03 May '17

I have a existing NFS storage domain I would like to import. I add the Name attribute and set the path and hit Enter but it gives me "Error while executing actions Attach Storage Domain: Internal Engine Error". I checked the Engine logs too to see if there's any clue when I do it but I cant seem to find anything. Maybe I can attach it here?

2 3