March 2020 - Users - oVirt List Archives

Re: Failed to deploy ovirt engine with "hosted-engine --deploy"
by Andrei Georgescu 13 Mar '20

13 Mar '20

I have the same issue in the last stage at the "Add VM" phase. You used a local NFS share of on another VM?

2 1

oVirt Storage quota problems
by Vrgotic, Marko 12 Mar '20

12 Mar '20

Dear oVirt, I am experiencing a quota related problem regarding two things: 1. Quota usage and exception trigger 2. User assigned as quota consumer First issue: I have defined quota for storage ( qstorage ), setting all following items: * Defining quota for storage, with threshold and grace * Setting quota mode to enforced in datacenter * Added Users as consumers of the Quota * Updated quota from Default to qstorage for Templates and related images * Updated quota from Default to qstorage from all existing VMs and the related Disks Problem: * the percentage of the Storage Consumption is jumping up and down, between 3% and 97%, and at certain point goes back to Unlimited * when checking under Storage tab inside quota name, the value “Used MB out of Total MB” is correct, however, when attempting to exceed the threshold, I am not getting a warning, even though I am consumer of a quota Second issue: User is added to qstorage quota as consumer. Still, when he tries to launch the VMs, Waring is displayed: Cannot add VM. The user is not a consumer of the Quota assigned to the resource. Have I missed something – could it be a permission issue, not a consumer issue. All my users are utilizing Administration Portal with limited set of permissions. They all have same Role assigned, but only few of them are having the problem I described as Second problem. Please assist. ----- kind regards/met vriendelijke groeten Marko Vrgotic Sr. System Engineer @ System Administration ActiveVideo o: +31 (35) 6774131 e: m.vrgotic(a)activevideo.com<mailto:m.vrgotic@activevideo.com> w: www.activevideo.com<http://www.activevideo.com> ActiveVideo Networks BV. Mediacentrum 3745 Joop van den Endeplein 1.1217 WJ Hilversum, The Netherlands. The information contained in this message may be legally privileged and confidential. It is intended to be read only by the individual or entity to whom it is addressed or by their designee. If the reader of this message is not the intended recipient, you are on notice that any distribution of this message, in any form, is strictly prohibited. If you have received this message in error, please immediately notify the sender and/or ActiveVideo Networks, LLC by telephone at +1 408.931.9200 and delete or destroy any copy of this message. From: "Vrgotic, Marko" <M.Vrgotic(a)activevideo.com> Date: Thursday, 27 February 2020 at 10:19 To: "users(a)ovirt.org" <users(a)ovirt.org> Cc: Darko Stojchev <D.Stojchev(a)activevideo.com> Subject: oVirt Storage quota questions Dear oVirt, My platform is running SHE oVirt version 4.3.8. Why is my StorageQuota consumption still showing “ 0 out of 3700” ? Did I forget something? [A screenshot of a cell phone Description automatically generated] I have setup storage quota “StorageQuota” for one of domains. It has 4400GB actual storage. * Quota is set to 3700GB. * Treshold for Quota is 85% and Grace is set to 110%. * Datacenter Quota is set to Enforced * The template image has been changed from Default to StorageQuota * I see that Vms created from Template are automatically assigned StorageQuota To present the following situation in screenshots: * Actual Quota: [A screenshot of a social media post Description automatically generated] * VMs (more than on the screenshot) which have the StorageQuota assigned: [A screenshot of a social media post Description automatically generated] * Templates which have the StorageQuota assigned [cid:image004.png@01D5F888.A7F96DC0] Kindly awaiting your reply. Additionally – is there an easy&safe way to update all running VMs quota? ----- kind regards/met vriendelijke groeten Marko Vrgotic Sr. System Engineer @ System Administration ActiveVideo o: +31 (35) 6774131 e: m.vrgotic(a)activevideo.com<mailto:m.vrgotic@activevideo.com> w: www.activevideo.com<http://www.activevideo.com> ActiveVideo Networks BV. Mediacentrum 3745 Joop van den Endeplein 1.1217 WJ Hilversum, The Netherlands. The information contained in this message may be legally privileged and confidential. It is intended to be read only by the individual or entity to whom it is addressed or by their designee. If the reader of this message is not the intended recipient, you are on notice that any distribution of this message, in any form, is strictly prohibited. If you have received this message in error, please immediately notify the sender and/or ActiveVideo Networks, LLC by telephone at +1 408.931.9200 and delete or destroy any copy of this message.

2 3

[ANN] oVirt 4.3.9 Fourth Release Candidate is now available for testing
by Lev Veyde 11 Mar '20

11 Mar '20

The oVirt Project is pleased to announce the availability of the oVirt 4.3.9 Fourth Release Candidate for testing, as of March 11th, 2020. This update is a release candidate of the ninth in a series of stabilization updates to the 4.3 series. This is pre-release software. This pre-release should not to be used in production. This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 7.7 or later (but <8) * CentOS Linux (or similar) 7.7 or later (but <8) This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 7.7 or later (but <8) * CentOS Linux (or similar) 7.7 or later (but <8) * oVirt Node 4.3 (available for x86_64 only) has been built consuming CentOS 7.7 Release See the release notes [1] for known issues, new features and bugs fixed. Notes: - oVirt Appliance is already available - oVirt Node is already available Additional Resources: * Read more about the oVirt 4.3.9 release highlights: http://www.ovirt.org/release/4.3.9/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.3.9/ [2] http://resources.ovirt.org/pub/ovirt-4.3-pre/iso/ -- Lev Veyde Senior Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

NFS ISO Domain - Outage ?
by Nardus Geldenhuys 11 Mar '20

11 Mar '20

Hi Ovirt Mailing-list Hope you are well. We had an outage over several ovirt clusters. It looks like we had the same ISO NFS domain shared to all off them, many of the VM's had a CD attached to it. The NFS server went down for an hour, all hell broke lose when the NFS server went down. Some of the ovirt nodes became "red/unresponssive" on the ovirt dashboard. We learned now to spilt the NFS server for ISO's and/or remove the ISO's when done. Has anyone seen similar issues with an NFS ISO Domain? Is there special options we need to pass to the mount to get around this? Can we put the ISO's somewhere else? Regards Nardus

3 4

ETL Service
by Anton Louw 11 Mar '20

11 Mar '20

Hi All, I am having a strange issue. I configured my DWH scale with scales that I would like to report on. I checked this morning, and the last row in my PostgreSQL DB is from the 9th. I checked the logs, and I see that it is referring to an "ETL Service" which I am not familiar with. I have attached the lines in the text document. If anybody could point me in the right direction, it would be greatly appreciated. Thank you Anton Louw Cloud Engineer: Storage and Virtualization ______________________________________ D: 087 805 1572 | M: N/A A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg anton.louw(a)voxtelecom.co.za www.vox.co.za

1 0

Re: Help
by Sandro Bonazzola 11 Mar '20

11 Mar '20

+Evgeny Slutsky <eslutsky(a)redhat.com> , +Asaf Rachmani <arachman(a)redhat.com> can you please have a look? Il giorno mar 10 mar 2020 alle ore 05:39 pradeep pal <pspal83(a)hotmail.com> ha scritto: > Hi, > > I deploy i am facing this issue. > > Deployment failed > [ INFO ] TASK [ovirt.hosted_engine_setup : Execute just a specific set of > steps] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Force facts gathering] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Install oVirt Hosted Engine > packages] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : System configuration > validations] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if he_network_test is not > valid] > [ INFO ] skipping: [localhost] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if he_tcp_t_address is not > defined] > [ INFO ] skipping: [localhost] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if he_tcp_t_port is not > defined] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if he_tcp_t_port is no > integer] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Generate unicast MAC address] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_vm_mac_addr] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if MAC address structure > is incorrect] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Get free memory] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Get cached memory] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Set Max memory] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : set he_mem_size_MB to max > available if not defined] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if available memory is > less then the minimal requirement] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if user chose less memory > then the minimal requirement] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if user chose more memory > then the available memory] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if he_disk_size_GB is > smaller then the minimal requirement] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Get domain name] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_cloud_init_domain_name] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Define he_cloud_init_host_name] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Get uuid] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_vm_uuid] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Get uuid] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_nic_uuid] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Get uuid] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_cdrom_uuid] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : get timezone] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_time_zone] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if he_force_ip4 and > he_force_ip6 are set at the same time] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Prepare getent key] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Get full hostname] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Set hostname variable if not > defined] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Define host address variable if > not defined] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if he_force_ip4 and > he_force_ip6 are set at the same time] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Prepare getent key] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Get host address resolution] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Check address resolution] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Parse host address resolution] > [ INFO ] ok: [localhost] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if host's ip is empty] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Avoid localhost] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Ensure host address resolves > locally] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Get target address from > selected interface (IPv4)] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Get target address from > selected interface (IPv6)] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Check the resolved address > resolves on the selected interface] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Check for alias] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Filter resolved address list] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Ensure the resolved address > resolves only on the selected interface] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Avoid localhost] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Get engine FQDN resolution] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Check engine he_fqdn resolution] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Parse engine he_fqdn resolution] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Ensure engine he_fqdn doesn't > resolve locally] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Check http/https proxy] > [ INFO ] TASK [ovirt.hosted_engine_setup : Detecting interface on existing > management bridge] > [ INFO ] TASK [ovirt.hosted_engine_setup : Get all active network > interfaces] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Filter bonds with bad naming] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Generate output list] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Validate selected bridge > interface if management bridge does not exists] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Populate service facts] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if the service is masked > or not running] > [ INFO ] TASK [ovirt.hosted_engine_setup : Get default gateway IPv4] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Get default gateway IPv6] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_gateway] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if there is no gateway] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if Data Center name format > is incorrect] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Validate Cluster name] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : get max cpus] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_maxvcpus] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_vcpus to maximum amount > if not defined] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Check number of chosen CPUs] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Check firewalld status] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Enforce firewalld status] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Stop libvirt service] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Drop vdsm config statements] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Restore initial abrt config > files] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Restart abrtd service] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Drop libvirt sasl2 > configuration by vdsm] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Stop and disable services] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Restore initial libvirt default > network configuration] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Start libvirt] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Check for leftover local Hosted > Engine VM] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Destroy leftover local Hosted > Engine VM] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Check for leftover defined > local Hosted Engine VM] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Undefine leftover local engine > VM] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Check for leftover defined > Hosted Engine VM] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Undefine leftover engine VM] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Remove eventually entries for > the local VM from known_hosts file] > [ INFO ] ok: [localhost -> localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Execute just a specific set of > steps] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Force facts gathering] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Install oVirt Hosted Engine > packages] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : System configuration > validations] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if he_network_test is not > valid] > [ INFO ] skipping: [localhost] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if he_tcp_t_address is not > defined] > [ INFO ] skipping: [localhost] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if he_tcp_t_port is not > defined] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if he_tcp_t_port is no > integer] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Generate unicast MAC address] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_vm_mac_addr] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if MAC address structure > is incorrect] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Get free memory] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Get cached memory] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Set Max memory] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : set he_mem_size_MB to max > available if not defined] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if available memory is > less then the minimal requirement] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if user chose less memory > then the minimal requirement] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if user chose more memory > then the available memory] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if he_disk_size_GB is > smaller then the minimal requirement] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Get domain name] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_cloud_init_domain_name] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Define he_cloud_init_host_name] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Get uuid] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_vm_uuid] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Get uuid] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_nic_uuid] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Get uuid] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_cdrom_uuid] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : get timezone] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_time_zone] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if he_force_ip4 and > he_force_ip6 are set at the same time] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Prepare getent key] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Get full hostname] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Set hostname variable if not > defined] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Define host address variable if > not defined] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if he_force_ip4 and > he_force_ip6 are set at the same time] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Prepare getent key] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Get host address resolution] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Check address resolution] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Parse host address resolution] > [ INFO ] ok: [localhost] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if host's ip is empty] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Avoid localhost] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Ensure host address resolves > locally] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Get target address from > selected interface (IPv4)] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Get target address from > selected interface (IPv6)] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Check the resolved address > resolves on the selected interface] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Check for alias] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Filter resolved address list] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Ensure the resolved address > resolves only on the selected interface] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Avoid localhost] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Get engine FQDN resolution] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Check engine he_fqdn resolution] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Parse engine he_fqdn resolution] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Ensure engine he_fqdn doesn't > resolve locally] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Check http/https proxy] > [ INFO ] TASK [ovirt.hosted_engine_setup : Detecting interface on existing > management bridge] > [ INFO ] TASK [ovirt.hosted_engine_setup : Get all active network > interfaces] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Filter bonds with bad naming] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Generate output list] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Validate selected bridge > interface if management bridge does not exists] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Populate service facts] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if the service is masked > or not running] > [ INFO ] TASK [ovirt.hosted_engine_setup : Get default gateway IPv4] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Get default gateway IPv6] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_gateway] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if there is no gateway] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if Data Center name format > is incorrect] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Validate Cluster name] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : get max cpus] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_maxvcpus] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_vcpus to maximum amount > if not defined] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Check number of chosen CPUs] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Check firewalld status] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Enforce firewalld status] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Stop libvirt service] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Drop vdsm config statements] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Restore initial abrt config > files] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Restart abrtd service] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Drop libvirt sasl2 > configuration by vdsm] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Stop and disable services] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Restore initial libvirt default > network configuration] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Start libvirt] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Check for leftover local Hosted > Engine VM] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Destroy leftover local Hosted > Engine VM] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Check for leftover defined > local Hosted Engine VM] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Undefine leftover local engine > VM] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Check for leftover defined > Hosted Engine VM] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Undefine leftover engine VM] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Remove eventually entries for > the local VM from known_hosts file] > [ INFO ] ok: [localhost -> localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Check IPv6] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : include_tasks] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Get IPv4 route] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Check if route exists] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Get IPv6 route] > [ INFO ] skipping: [localhost] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Check if route exists] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : include_tasks] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Parse libvirt default network > configuration] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Remove IPv4 configuration] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Configure it as an isolated > network] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Edit libvirt default network > configuration, set IPv6 address] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Edit libvirt default network > configuration, set IPv6 prefix] > [ INFO ] skipping: [localhost] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Edit libvirt default network > configuration, enable DHCPv6] > [ INFO ] skipping: [localhost] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Edit libvirt default network > configuration, set DHCPv6 range] > [ INFO ] skipping: [localhost] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Edit libvirt default network > configuration, change default address] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Edit libvirt default network > configuration, change DHCP start range] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Edit libvirt default network > configuration, change DHCP end range] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Update libvirt default network > configuration, destroy] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Update libvirt default network > configuration, undefine] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Update libvirt default network > configuration, define] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Activate default libvirt > network] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Start libvirt] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Activate default libvirt > network] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Get libvirt interfaces] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Get routing rules, IPv4] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Get routing rules, IPv6] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Save bridge name] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Wait for the bridge to appear > on the host] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Refresh network facts] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Fetch IPv4 CIDR for virbr0] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Fetch IPv6 CIDR for virbr0] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Add IPv4 outbound route rules] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Add IPv4 inbound route rules] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Add IPv6 outbound route rules] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Add IPv6 inbound route rules] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Fetch the value of > HOST_KEY_CHECKING] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Get the username running the > deploy] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Register the engine FQDN as a > host] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Get host unique id] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Create directory for local VM] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Set local vm dir path] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Fix local VM directory > permission] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : include_tasks] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Install ovirt-engine-appliance > rpm] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Parse appliance configuration > for path] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Parse appliance configuration > for sha1sum] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Get OVA path] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Compute sha1sum] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Compare sha1sum] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Register appliance PATH] > [ INFO ] skipping: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Check available space on local > VM directory] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Check appliance size] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Ensure we have enough space to > extract the appliance] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Extract appliance to local VM > directory] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : include_tasks] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Find the local appliance image] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Set local_vm_disk_path] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Get appliance disk size] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Parse qemu-img output] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Hash the appliance root > password] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Create cloud init user-data and > meta-data files] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Create ISO disk] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Create local VM] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Get local VM IP] > [ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 90, "changed": true, > "cmd": "virsh -r net-dhcp-leases default | grep -i 00:16:3e:26:62:bb | awk > '{ print $5 }' | cut -f1 -d'/'", "delta": "0:00:00.168755", "end": > "2020-03-07 09:16:17.867170", "rc": 0, "start": "2020-03-07 > 09:16:17.698415", "stderr": "", "stderr_lines": [], "stdout": "", > "stdout_lines": []} > [ INFO ] TASK [ovirt.hosted_engine_setup : include_tasks] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Remove local vm dir] > [ INFO ] changed: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Remove temporary entry in > /etc/hosts for the local VM] > [ INFO ] ok: [localhost] > [ INFO ] TASK [ovirt.hosted_engine_setup : Notify the user about a failure] > [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "The > system may not be provisioned according to the playbook results: please > check the logs for the issue, fix accordingly or re-deploy from scratch.\n"} > > Thanks > Pradeep > ------------------------------ > *From:* pradeep pal > *Sent:* Saturday, March 7, 2020 2:13 PM > *To:* @ovirt.org > *Subject:* Help > > Hi, > > I am new for Ovirt technology, right now I am facing issue when I try to > install Ovirt self-host engine(Using cockpit for this installation ). > > getting this error. > > ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "The > system may not be provisioned according to the playbook results: please > check the logs for the issue, fix accordingly or re-deploy from scratch.\n"} > > Thanks > Pradeep > > -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/>*Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours. <https://mojo.redhat.com/docs/DOC-1199578>*

2 1

Re-ip storage
by David Johnson 11 Mar '20

11 Mar '20

Good afternoon all, We are upgrading our storage backbone, moving it off of our common 1 GBit backbone to a 10 dedicated storage backbone. When this happens, we will need to re-ip the storage domains with to IP address of the 10 GBit release. For a period of time, as we upgrade the rest of our hardware, we may have to operate both the original and the new IP addresses. *Some gotchas:* 1. My controller is at level 4.3, but some of my my compute nodes are at level 4.2 because they have older Penryn class processors. We didn't plan the upgrade - it happened because our controller's hard drive failed and took the cluster with it. *Practical question:* 1. Can I simply operate the same storage domain on two IP addresses on different physical networks eg. 10.10.1.x and 10.10.10.x ? 2. Is an alternative solution to operate two storage domains from the storage appliance, and migrate the storage from the 1GBit domain to the 10 GBit domain over time, then drop/abandon the old storage domain once everything is on the 10 GBit? I have plenty of storage to do this. 3. Is there a better way I haven't thought of? Regards, David Johnson Director of Development, Maxis Technology 844.696.2947 ext 702 (o) | 479.531.3590 (c) djohnson(a)maxistechnology.com [image: Maxis Techncology] <http://www.maxistechnology.com> www.maxistechnology.com *stay connected <http://www.linkedin.com/in/pojoguy>*

2 3

Re: [moVirt] Error: sos conflicts with vdsm-4.20.46-1.el7.x86_64
by Tomas Jelinek 10 Mar '20

10 Mar '20

forwarding to the correct list On Tue, Mar 10, 2020 at 1:58 PM <garcialiang.anne(a)gmail.com> wrote: > Hello, > I'm sorry. I've the problem for install ovirt in my server with the system > centos 7.7. > I'm installing vdsm. But I've the message: > > Error: sos conflicts with vdsm-4.20.46-1.el7.x86_64 > > Could you help me? > > Thanks, > > Anne > _______________________________________________ > moVirt mailing list -- movirt(a)ovirt.org > To unsubscribe send an email to movirt-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/movirt@ovirt.org/message/4Y4IUFTH5S3Q… >

3 2

where doe sthe VM run?
by rp.neuli＠yahoo.com 09 Mar '20

09 Mar '20

I am planning to host my VM images on backend FreeNAS filer. I am assuming VMs are downloaded and run in the memory of PC running oVirt engine. What would be the way to install all of oVirt on one PC and just store VMs on freeNAS? Also more importantly, what type of HW conifg would that PC need for running a bunch of LAMP VMs?? Thanks. RJ

1 0

Help
by pradeep pal 09 Mar '20

09 Mar '20

Hi, I deploy i am facing this issue. Deployment failed [ INFO ] TASK [ovirt.hosted_engine_setup : Execute just a specific set of steps] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Force facts gathering] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Install oVirt Hosted Engine packages] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : System configuration validations] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if he_network_test is not valid] [ INFO ] skipping: [localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if he_tcp_t_address is not defined] [ INFO ] skipping: [localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if he_tcp_t_port is not defined] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if he_tcp_t_port is no integer] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Generate unicast MAC address] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_vm_mac_addr] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if MAC address structure is incorrect] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get free memory] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get cached memory] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set Max memory] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : set he_mem_size_MB to max available if not defined] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if available memory is less then the minimal requirement] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if user chose less memory then the minimal requirement] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if user chose more memory then the available memory] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if he_disk_size_GB is smaller then the minimal requirement] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get domain name] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_cloud_init_domain_name] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Define he_cloud_init_host_name] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get uuid] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_vm_uuid] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get uuid] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_nic_uuid] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get uuid] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_cdrom_uuid] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : get timezone] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_time_zone] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if he_force_ip4 and he_force_ip6 are set at the same time] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Prepare getent key] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get full hostname] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set hostname variable if not defined] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Define host address variable if not defined] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if he_force_ip4 and he_force_ip6 are set at the same time] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Prepare getent key] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get host address resolution] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Check address resolution] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Parse host address resolution] [ INFO ] ok: [localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if host's ip is empty] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Avoid localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Ensure host address resolves locally] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get target address from selected interface (IPv4)] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get target address from selected interface (IPv6)] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Check the resolved address resolves on the selected interface] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Check for alias] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Filter resolved address list] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Ensure the resolved address resolves only on the selected interface] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Avoid localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get engine FQDN resolution] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Check engine he_fqdn resolution] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Parse engine he_fqdn resolution] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Ensure engine he_fqdn doesn't resolve locally] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Check http/https proxy] [ INFO ] TASK [ovirt.hosted_engine_setup : Detecting interface on existing management bridge] [ INFO ] TASK [ovirt.hosted_engine_setup : Get all active network interfaces] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Filter bonds with bad naming] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Generate output list] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Validate selected bridge interface if management bridge does not exists] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Populate service facts] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if the service is masked or not running] [ INFO ] TASK [ovirt.hosted_engine_setup : Get default gateway IPv4] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get default gateway IPv6] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_gateway] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if there is no gateway] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if Data Center name format is incorrect] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Validate Cluster name] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : get max cpus] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_maxvcpus] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_vcpus to maximum amount if not defined] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Check number of chosen CPUs] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Check firewalld status] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Enforce firewalld status] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Stop libvirt service] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Drop vdsm config statements] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Restore initial abrt config files] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Restart abrtd service] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Drop libvirt sasl2 configuration by vdsm] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Stop and disable services] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Restore initial libvirt default network configuration] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Start libvirt] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Check for leftover local Hosted Engine VM] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Destroy leftover local Hosted Engine VM] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Check for leftover defined local Hosted Engine VM] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Undefine leftover local engine VM] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Check for leftover defined Hosted Engine VM] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Undefine leftover engine VM] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Remove eventually entries for the local VM from known_hosts file] [ INFO ] ok: [localhost -> localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Execute just a specific set of steps] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Force facts gathering] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Install oVirt Hosted Engine packages] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : System configuration validations] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if he_network_test is not valid] [ INFO ] skipping: [localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if he_tcp_t_address is not defined] [ INFO ] skipping: [localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if he_tcp_t_port is not defined] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if he_tcp_t_port is no integer] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Generate unicast MAC address] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_vm_mac_addr] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if MAC address structure is incorrect] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get free memory] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get cached memory] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set Max memory] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : set he_mem_size_MB to max available if not defined] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if available memory is less then the minimal requirement] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if user chose less memory then the minimal requirement] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if user chose more memory then the available memory] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if he_disk_size_GB is smaller then the minimal requirement] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get domain name] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_cloud_init_domain_name] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Define he_cloud_init_host_name] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get uuid] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_vm_uuid] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get uuid] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_nic_uuid] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get uuid] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_cdrom_uuid] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : get timezone] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_time_zone] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if he_force_ip4 and he_force_ip6 are set at the same time] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Prepare getent key] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get full hostname] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set hostname variable if not defined] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Define host address variable if not defined] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if he_force_ip4 and he_force_ip6 are set at the same time] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Prepare getent key] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get host address resolution] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Check address resolution] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Parse host address resolution] [ INFO ] ok: [localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if host's ip is empty] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Avoid localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Ensure host address resolves locally] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get target address from selected interface (IPv4)] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get target address from selected interface (IPv6)] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Check the resolved address resolves on the selected interface] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Check for alias] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Filter resolved address list] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Ensure the resolved address resolves only on the selected interface] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Avoid localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get engine FQDN resolution] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Check engine he_fqdn resolution] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Parse engine he_fqdn resolution] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Ensure engine he_fqdn doesn't resolve locally] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Check http/https proxy] [ INFO ] TASK [ovirt.hosted_engine_setup : Detecting interface on existing management bridge] [ INFO ] TASK [ovirt.hosted_engine_setup : Get all active network interfaces] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Filter bonds with bad naming] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Generate output list] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Validate selected bridge interface if management bridge does not exists] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Populate service facts] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if the service is masked or not running] [ INFO ] TASK [ovirt.hosted_engine_setup : Get default gateway IPv4] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get default gateway IPv6] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_gateway] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if there is no gateway] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fail if Data Center name format is incorrect] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Validate Cluster name] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : get max cpus] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_maxvcpus] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set he_vcpus to maximum amount if not defined] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Check number of chosen CPUs] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Check firewalld status] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Enforce firewalld status] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Stop libvirt service] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Drop vdsm config statements] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Restore initial abrt config files] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Restart abrtd service] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Drop libvirt sasl2 configuration by vdsm] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Stop and disable services] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Restore initial libvirt default network configuration] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Start libvirt] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Check for leftover local Hosted Engine VM] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Destroy leftover local Hosted Engine VM] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Check for leftover defined local Hosted Engine VM] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Undefine leftover local engine VM] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Check for leftover defined Hosted Engine VM] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Undefine leftover engine VM] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Remove eventually entries for the local VM from known_hosts file] [ INFO ] ok: [localhost -> localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Check IPv6] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get IPv4 route] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Check if route exists] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get IPv6 route] [ INFO ] skipping: [localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Check if route exists] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Parse libvirt default network configuration] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Remove IPv4 configuration] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Configure it as an isolated network] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Edit libvirt default network configuration, set IPv6 address] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Edit libvirt default network configuration, set IPv6 prefix] [ INFO ] skipping: [localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Edit libvirt default network configuration, enable DHCPv6] [ INFO ] skipping: [localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Edit libvirt default network configuration, set DHCPv6 range] [ INFO ] skipping: [localhost] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Edit libvirt default network configuration, change default address] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Edit libvirt default network configuration, change DHCP start range] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Edit libvirt default network configuration, change DHCP end range] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Update libvirt default network configuration, destroy] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Update libvirt default network configuration, undefine] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Update libvirt default network configuration, define] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Activate default libvirt network] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Start libvirt] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Activate default libvirt network] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get libvirt interfaces] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get routing rules, IPv4] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get routing rules, IPv6] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Save bridge name] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Wait for the bridge to appear on the host] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Refresh network facts] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fetch IPv4 CIDR for virbr0] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fetch IPv6 CIDR for virbr0] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Add IPv4 outbound route rules] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Add IPv4 inbound route rules] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Add IPv6 outbound route rules] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Add IPv6 inbound route rules] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fetch the value of HOST_KEY_CHECKING] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get the username running the deploy] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Register the engine FQDN as a host] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get host unique id] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Create directory for local VM] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set local vm dir path] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Fix local VM directory permission] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Install ovirt-engine-appliance rpm] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Parse appliance configuration for path] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Parse appliance configuration for sha1sum] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get OVA path] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Compute sha1sum] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Compare sha1sum] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Register appliance PATH] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Check available space on local VM directory] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Check appliance size] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Ensure we have enough space to extract the appliance] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Extract appliance to local VM directory] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Find the local appliance image] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Set local_vm_disk_path] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get appliance disk size] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Parse qemu-img output] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Hash the appliance root password] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Create cloud init user-data and meta-data files] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Create ISO disk] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Create local VM] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Get local VM IP] [ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 90, "changed": true, "cmd": "virsh -r net-dhcp-leases default | grep -i 00:16:3e:26:62:bb | awk '{ print $5 }' | cut -f1 -d'/'", "delta": "0:00:00.168755", "end": "2020-03-07 09:16:17.867170", "rc": 0, "start": "2020-03-07 09:16:17.698415", "stderr": "", "stderr_lines": [], "stdout": "", "stdout_lines": []} [ INFO ] TASK [ovirt.hosted_engine_setup : include_tasks] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Remove local vm dir] [ INFO ] changed: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Remove temporary entry in /etc/hosts for the local VM] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Notify the user about a failure] [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "The system may not be provisioned according to the playbook results: please check the logs for the issue, fix accordingly or re-deploy from scratch.\n"} Thanks Pradeep ________________________________ From: pradeep pal Sent: Saturday, March 7, 2020 2:13 PM To: @ovirt.org Subject: Help Hi, I am new for Ovirt technology, right now I am facing issue when I try to install Ovirt self-host engine(Using cockpit for this installation ). getting this error. ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "The system may not be provisioned according to the playbook results: please check the logs for the issue, fix accordingly or re-deploy from scratch.\n"} Thanks Pradeep

1 0

Upload/download disks through muCommander
by Arik Hadas 09 Mar '20

09 Mar '20

Hi all, I want to share with you that a new version of muCommander has been released and this version includes integration with oVirt! A demo of the provided functionality is available at [1]: First, we connect to RHV (but the following process would work the same for oVirt) and browse the content if its storage domain. Then, we take two virtual disk images, one of format=raw and size=3G and second of format=qcow2 and size=2G, and upload them to that storage domain. In the meantime, we download an iso file from the storage domain and explore its content. We check the format and size for the uploaded disks. Lastly, we remove the first disk from within muCommander and see that it also disappears from the storage domain. That can be seen as a front-end of oVirt's Image I/O [2]. However, please be aware of the following limitations: 1. Snapshots are not supported. 2. There is no way to specify the virtual size of the disk. This means it works nicely for preallocated disks and for uploading iso files to data domains (note the filename must end with the '.iso' extension), but thin-provisioned disks would probably need to be extended after the upload. 3. oVirt-specific things like disk description, host to upload the disk to, wipe-after-delete, and others cannot be specified. This version of muCommander (v0.9.4-2) can be downloaded from [3]. Please feel free to to file issues for bugs or possible enhancements at [4] Note that muCommander is not under the oVirt umbrella. Feedback is welcome! [1] https://youtu.be/F2u3cDGfEU0 [2] https://www.ovirt.org/develop/release-management/features/storage/image-upl… [3] https://github.com/mucommander/mucommander/releases/tag/0.9.4-2 [4] https://github.com/mucommander/mucommander/issues Thanks, Arik

1 0

Help recovering cluster
by Joe Sherman 09 Mar '20

09 Mar '20

Hello all, New to the group, apologies for any poor information. I have a home lab with a single host ovirt setup. I actually don't think I ever set it up exactly right, the agent vm was never created, it was running on the host server. But it ran and I had a handful of vm's running on it successfully. I knew I had to rebuild it but was waiting for funds for extra hardware. Then the other day I came home and could no longer access the web portal. Could get to the login page but after entering my auth info it just hangs. I'm honestly not even sure where to start. Does anyone know any good troubleshooting docs? Or any idea what may be happening? I can see the VM images and such in the proper folders so I don't think I have .lost anything. But can't access any of the vm's now. Any help would be appreciated. Joe

3 5

What if anything can be done to improve small file performance with gluster?
by Jayme 08 Mar '20

08 Mar '20

I have 3 server HCI with Gluster replica 3 storage (10GBe and SSD disks). Small file performance inner-vm is pretty terrible compared to a similar spec'ed VM using NFS mount (10GBe network, SSD disk) VM with gluster storage: # dd if=/dev/zero of=test2.img bs=512 count=1000 oflag=dsync 1000+0 records in 1000+0 records out 512000 bytes (512 kB) copied, 53.9616 s, 9.5 kB/s VM with NFS: # dd if=/dev/zero of=test2.img bs=512 count=1000 oflag=dsync 1000+0 records in 1000+0 records out 512000 bytes (512 kB) copied, 2.20059 s, 233 kB/s This is a very big difference, 2 seconds to copy 1000 files on NFS VM VS 53 seconds on the other. Aside from enabling libgfapi is there anything I can tune on the gluster or VM side to improve small file performance? I have seen some guides by Redhat in regards to small file performance but I'm not sure what/if any of it applies to oVirt's implementation of gluster in HCI.

2 9

upgrade from 4.38 to 4.39
by eevans＠digitaldatatechs.com 08 Mar '20

08 Mar '20

I read documentation on upgrade procedures for minor upgrades. Before I begin, I wanted to know of any issues or special procedures I need to follow. Please advise. I appreciate any advice or guidance. Thank you. Eric

3 4

Getting Redhat Yum mirrors issues on some of my network subnet and not on the others
by Eugène Ngontang 06 Mar '20

06 Mar '20

Hi, This is not really an OVirt matter but I'll try my chance if anyone here has already had this kind of issue or could help I've two bare metal servers in two different network subnets with same release version of RHVH/Ovirt. I use an automated script to deploy VMs on both, and provision a docker repository file there on VMs. The issue I'm facing is when I'm trying to query `container-selinux` package. It works on VMs from one of my bare metal servers, and not from the other. first sever's VM: [root@cpu-node0 ~]# /bin/repoquery --show-duplicates --plugins > --disablerepo '' --enablerepo '' --qf > '%{name}|%{epoch}|%{version}|%{release}|%{arch}|%{repoid}' > container-selinux > container-selinux|2|2.107|1.el7_6|noarch|extras > container-selinux|2|2.107|3.el7|noarch|extras > [root@cpu-node0 ~]# Second server's VM : [root@cpu-node0 ~]# /bin/repoquery --show-duplicates --plugins > --disablerepo '' --enablerepo '' --qf > '%{name}|%{epoch}|%{version}|%{release}|%{arch}|%{repoid}' > container-selinux > Could not match packages: failure: repodata/repomd.xml from > docker-engine: [Errno 256] No more mirrors to try. > https://yum.dockerproject.org/repo/main/centos/7/repodata/repomd.xml: > [Errno 14] HTTPS Error 404 - Not Found > [root@cpu-node0 ~]# The yum repo configuration on both VMs running on each bare metal server: [root@cpu-node0 ~]# ll /etc/yum.repos.d/ > total 44 > -rw-r--r--. 1 root root 1664 5 sept. 13:05 CentOS-Base.repo > -rw-r--r--. 1 root root 1309 5 sept. 13:05 CentOS-CR.repo > -rw-r--r--. 1 root root 649 5 sept. 13:05 CentOS-Debuginfo.repo > -rw-r--r--. 1 root root 314 5 sept. 13:05 CentOS-fasttrack.repo > -rw-r--r--. 1 root root 630 5 sept. 13:05 CentOS-Media.repo > -rw-r--r--. 1 root root 1331 5 sept. 13:05 CentOS-Sources.repo > -rw-r--r--. 1 root root 6639 5 sept. 13:05 CentOS-Vault.repo > -rw-r--r--. 1 root root 369 2 mars 23:31 docker.repo > -rw-r--r--. 1 root root 1050 17 sept. 23:25 epel.repo > -rw-r--r--. 1 root root 1149 17 sept. 23:25 epel-testing.repo > [root@cpu-node0 ~]# docker.repo file content on both VMs : [root@cpu-node0 ~]# cat /etc/yum.repos.d/docker.repo > [docker-ce] > name=Docker-CE Repository > baseurl=https://download.docker.com/linux/centos/7/$basearch/stable > enabled=1 > gpgcheck=1 > keepcache=1 > gpgkey=https://download.docker.com/linux/centos/gpg > > [docker-engine] > name=Docker-Engine Repository > baseurl=https://yum.dockerproject.org/repo/main/centos/7 > enabled=1 > gpgcheck=1 > keepcache=1 > gpgkey=https://yum.dockerproject.org/gpg > [root@cpu-node0 ~]# Repo list on the first VM : [root@cpu-node0 ~]# yum repolist > id du dépôt > nom du dépôt > statut > base/7/x86_64 > CentOS-7 - Base > 10 097 > docker-ce/x86_64 > Docker-CE Repository > 68 > !docker-engine > Docker-Engine Repository > 110 > epel/x86_64 > Extra Packages for Enterprise Linux 7 - x86_64 > 13 199 > extras/7/x86_64 > CentOS-7 - Extras > 323 > updates/7/x86_64 > CentOS-7 - Updates > 1 478 > repolist: 25 275 > [root@cpu-node0 ~]# Yum repo list on the second VM: [root@cpu-node0 ~]# yum repolist > https://yum.dockerproject.org/repo/main/centos/7/repodata/repomd.xml: > [Errno 14] HTTPS Error 404 - Not Found > Essai d'un autre miroir. > To address this issue please refer to the below wiki article > > https://wiki.centos.org/yum-errors > > If above article doesn't help to resolve this issue please use > https://bugs.centos.org/. > > docker-ce/x86_64/primary_db > > | 40 kB 00:00:05 > https://yum.dockerproject.org/repo/main/centos/7/repodata/repomd.xml: > [Errno 14] HTTPS Error 404 - Not Found > Essai d'un autre miroir. > id du dépôt > nom du dépôt > statut > base/7/x86_64 > CentOS-7 - Base > 10 097 > docker-ce/x86_64 > Docker-CE Repository > 68 > docker-engine > Docker-Engine Repository > 0 > epel/x86_64 > Extra Packages for Enterprise Linux 7 - x86_64 > 13 199 > extras/7/x86_64 > CentOS-7 - Extras > 323 > updates/7/x86_64 > CentOS-7 - Updates > 1 478 > repolist: 25 165 > [root@cpu-node0 ~]# I also get the message below when trying to curl the repository URL : > > [root@cpu-node0 ~]#curl > https://yum.dockerproject.org/repo/main/centos/7/repodata/repomd.xml > > <!doctype html> > > <html lang="en"> > > <head></head> > > <body> > > <h1>Notice: Shutting down dockerproject.org APT and YUM repos > 2020-03-31</h1> > > <p>Docker will be shutting down the deprecated APT and YUM > repositories hosted at "dockerproject.org" and "dockerproject.com" on the > 31st of March 2020.</p> > > <p>We noticed that this project is referencing one of these > repositories, and recommend updating to use the "download.docker.com" > repository to prevent disruption.</p> > > <p>More info: > https://www.docker.com/blog/changes-dockerproject-org-apt-yum-repositories/ > </p> > > </body> > > </html> Looks like docker does not want anyone to use this repo anymore. Probably they started issuing the error from today I guess. Of course the two VMs do not have `subscription-manager` package installed, neither subscription attached, they don't need actually in our context, but why is there a mirror issue on one VM and not on the other, whose OS and system configuration is the same on both, except that they are locate in two different networks? Can someone have any idea of why this happens please? Kind regards, Eugène NG -- LesCDN <http://lescdn.com> engontang(a)lescdn.com ------------------------------------------------------------ *Aux hommes il faut un chef, et au* * chef il faut des hommes!L'habit ne fait pas le moine, mais lorsqu'on te voit on te juge!*

2 4

qcow on LVM‽ Why‽
by Thorsten Glaser 06 Mar '20

06 Mar '20

Hi *, I’m a bit frustrated, so please excuse any harshness in this mail. Whose idea was it to place qcow on logical volumes anyway? I was shrinking a hard disc: first the filesystems inside the VM, then the partitions inside the VM, then the LV… then I wanted to convert the LV to a compressed qcow2 file for transport, and it told me that the source is corrupted. Huh? I had already wondered why I was unable to inspect the LV on the host the usual way (kpartx -v -a /dev/VG/LV after finding out, with “virsh --readonly -c qemu:///system domblklist VM_NAME”, which LV is the right one). Turns out that ovirt stores qcow on LVs instead of raw images ☹ Well, vgcfgrestore to my rescue: - vgcfgrestore -l VG_NAME - vgcfgrestore -f /etc/… VG_NAME The image was still marked as corrupted, but exported fine. I could not write it back to the LV as preallocated, which seems to be what ovirt does, because qemu-img doesn’t wish to do that when the target is a special device (not a regular file). Meh. Does ovirt handle raw images on LV, and if so, how can we enable this for new VMs? If not, whyever the hell not? And whose “great” idea was this anyway? Thanks in advance, //mirabilos -- tarent solutions GmbH Rochusstraße 2-4, D-53123 Bonn • http://www.tarent.de/ Tel: +49 228 54881-393 • Fax: +49 228 54881-235 HRB 5168 (AG Bonn) • USt-ID (VAT): DE122264941 Geschäftsführer: Dr. Stefan Barth, Kai Ebenrett, Boris Esser, Alexander Steeg ********** Mit der tarent Academy bieten wir auch Trainings und Schulungen in den Bereichen Softwareentwicklung, Agiles Arbeiten und Zukunftstechnologien an. Besuchen Sie uns auf www.tarent.de/academy. Wir freuen uns auf Ihren Kontakt. **********

4 5

The problem with create VM
by garcialiang.anne＠gmail.com 06 Mar '20

06 Mar '20

I began use ovirt recently. I tried create one VM on ovirt plateform. But I nerver start VM. I had the message like: L'hôte xxxxx.xxxx.fr n'a pas pu satisfaire le filtre Network de type interne car réseau d'affichage ${DisplayNames} manquant. I don't understand where is the problem. Could you help me? Thanks Anne

5 4

Windows deployment
by eevans＠digitaldatatechs.com 06 Mar '20

06 Mar '20

I have a Windows Deployment server that works with Hyper-V. I am tryng to see if it will bare metal provision to Ovirt. I have the necessary drivers loaded and initially it gets an IP and starts the installation. When it comes to the screen starting setup, I get an IP error. I have included a screenshot. Has anyone see this before? I also considered provisioning from Foreman but I would rather use what I have instead of recreating the entire installation. Any help would be appreciated. Here is a link to the actual error: ftp://ftp.digitaldatatechs.com/pub/Windows%20Provision.jpg

3 4

subnets
by eevans＠digitaldatatechs.com 05 Mar '20

05 Mar '20

I have a network in place with several subnets, one for iscsi and one for virtual pbx and VoIP phones. I use the iscsi in Ovirt, but I cannot get Ovirt to recognize and use the physical vlan 3 network for phones. If I add it and the subnet, Ovirt will make give it an IP, but it's an isolated network with no connectivity to the other vm's or the Internet. I have read several topics on this but I can't get it to work properly. Any help would be appreciated. Thanks.

3 5

Debian 10 template - cloud init not working
by Sakari Poussa 05 Mar '20

05 Mar '20

Hi, I have tried centos7 & 8, debian 9 and ubuntu 18.04 template based VMs with cloud init (Initial run/use cloud init) and they all work as expected. However, the debian 10 template based VM seems *not* to execute the cloud init at all. It boots but hostname is not set and users / password are not set. You can't log in since there is no users and passwords/keys. Is this a known issue? Or am I missing something? The templates are from ovirt-image-repository storage domain. I have also created newer debian 10.3.0 template via ovirt.image-template ansible role. Results are the same. I am running ovirt 4.4-pre. Thanks, Sakari

2 3

[ANN] oVirt 4.3.9 Third Release Candidate is now available for testing
by Lev Veyde 05 Mar '20

05 Mar '20

The oVirt Project is pleased to announce the availability of the oVirt 4.3.9 Third Release Candidate for testing, as of March 5th, 2020. This update is a release candidate of the ninth in a series of stabilization updates to the 4.3 series. This is pre-release software. This pre-release should not to be used in production. This release is available now on x86_64 architecture for: * Red Hat Enterprise Linux 7.7 or later (but <8) * CentOS Linux (or similar) 7.7 or later (but <8) This release supports Hypervisor Hosts on x86_64 and ppc64le architectures for: * Red Hat Enterprise Linux 7.7 or later (but <8) * CentOS Linux (or similar) 7.7 or later (but <8) * oVirt Node 4.3 (available for x86_64 only) has been built consuming CentOS 7.7 Release See the release notes [1] for known issues, new features and bugs fixed. Notes: - oVirt Appliance is already available - oVirt Node is already available Additional Resources: * Read more about the oVirt 4.3.9 release highlights: http://www.ovirt.org/release/4.3.9/ * Get more oVirt Project updates on Twitter: https://twitter.com/ovirt * Check out the latest project news on the oVirt blog: http://www.ovirt.org/blog/ [1] http://www.ovirt.org/release/4.3.9/ [2] http://resources.ovirt.org/pub/ovirt-4.3-pre/iso/ -- Lev Veyde Senior Software Engineer, RHCE | RHCVA | MCITP Red Hat Israel <https://www.redhat.com> lev(a)redhat.com | lveyde(a)redhat.com <https://red.ht/sig> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

1 0

Re: Changing the Data Warehouse Sampling Scale
by Yedidyah Bar David 05 Mar '20

05 Mar '20

On Wed, Mar 4, 2020 at 7:09 PM Staniforth, Paul <P.Staniforth(a)leedsbeckett.ac.uk> wrote: > > > Hello Anton, > you can also manually do this > edit /etc/ovirt-engine-dwh/ovirt-engine-dwhd.conf.d/10-setup-scale.conf > run systemctl restart ovirt-engine-dwhd.service > > if you upgrade your engine it puts the old 10-setup-scale.conf back but it keeps a copy You can also add your own copy of this file with a later name (say "99-my-stuff.conf"). This will take precedence and won't be touched by upgrades. However: > > > Regards, > Paul S. > ________________________________ > From: anton.louw(a)voxtelecom.co.za <anton.louw(a)voxtelecom.co.za> > Sent: 04 March 2020 05:37 > To: users(a)ovirt.org <users(a)ovirt.org> > Subject: [ovirt-users] Changing the Data Warehouse Sampling Scale > > Caution External Mail: Do not click any links or open any attachments unless you trust the sender and know that the content is safe. > > Hi Everybody, > > I have a question. When oVirt was deployed in our environment by previous engineers, the DWH was installed as Basic. I would like to change this to Full, to get the daily stats, as this is now empty due to the scale. If it's completely empty, perhaps there is some other problem, not the scale. To further debug this, check that both the engine and dwh access the same database (this should be ok by default, but perhaps you used non-defaults) by checking the credentials they use in their conf files: grep DWH_DB /etc/ovirt-engine/engine.conf.d/*conf grep DWH_DB /etc/ovirt-engine-dwh/ovirt-engine-dwhd.conf.d/*conf You might also check /var/log/ovirt-engine-dwh/ovirt-engine-dwhd.log . Best regards, > Is this just as simple as described in the following article: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt… > > Are there any precautions I should take, and has anybody else ever done this before? > > Thanks a lot > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt… > oVirt Code of Conduct: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt… > List Archives: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.ovi… > To view the terms under which this email is distributed, please go to:- > http://leedsbeckett.ac.uk/disclaimer/email/ > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/privacy-policy.html > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/FQBQ4ISS5BTVH… -- Didi

2 1

Re: Changing the Data Warehouse Sampling Scale
by Anton Louw 05 Mar '20

05 Mar '20

Hi Paul, That is great news! Thanks so much for the reply. Cheers Anton Louw Cloud Engineer: Storage and Virtualization ______________________________________ D: 087 805 1572 | M: N/A A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg anton.louw(a)voxtelecom.co.za www.vox.co.za From: Staniforth, Paul <P.Staniforth(a)leedsbeckett.ac.uk> Sent: 04 March 2020 18:35 To: Anton Louw <Anton.Louw(a)voxtelecom.co.za>; users(a)ovirt.org Subject: Re: [ovirt-users] Changing the Data Warehouse Sampling Scale Hello Anton, you can also manually do this edit /etc/ovirt-engine-dwh/ovirt-engine-dwhd.conf.d/10-setup-scale.conf run systemctl restart ovirt-engine-dwhd.service if you upgrade your engine it puts the old 10-setup-scale.conf back but it keeps a copy Regards, Paul S. ________________________________ From: anton.louw(a)voxtelecom.co.za<mailto:anton.louw@voxtelecom.co.za> <anton.louw(a)voxtelecom.co.za<mailto:anton.louw@voxtelecom.co.za>> Sent: 04 March 2020 05:37 To: users(a)ovirt.org<mailto:users@ovirt.org> <users(a)ovirt.org<mailto:users@ovirt.org>> Subject: [ovirt-users] Changing the Data Warehouse Sampling Scale Caution External Mail: Do not click any links or open any attachments unless you trust the sender and know that the content is safe. Hi Everybody, I have a question. When oVirt was deployed in our environment by previous engineers, the DWH was installed as Basic. I would like to change this to Full, to get the daily stats, as this is now empty due to the scale. Is this just as simple as described in the following article: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt…<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt…> Are there any precautions I should take, and has anybody else ever done this before? Thanks a lot _______________________________________________ Users mailing list -- users(a)ovirt.org<mailto:users@ovirt.org> To unsubscribe send an email to users-leave(a)ovirt.org<mailto:users-leave@ovirt.org> Privacy Statement: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt…<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt…> oVirt Code of Conduct: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt…<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ovirt…> List Archives: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.ovi…<https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.ovi…> To view the terms under which this email is distributed, please go to:- http://leedsbeckett.ac.uk/disclaimer/email/<http://leedsbeckett.ac.uk/disclaimer/email/>

1 0

Re: subnets
by Dominik Holler 05 Mar '20

05 Mar '20

On Tue, Mar 3, 2020 at 1:48 PM <eevans(a)digitaldatatechs.com> wrote: > Uncheck passthrough and make sure the vnic is part of a legitimate network. > > > Does this mean that there are still problems to schedule the VM? If so, please share the relevant lines of engine.log. > Eric Evans > > Digital Data Services LLC. > > 304.660.9080 > > > > *From:* Dominik Holler <dholler(a)redhat.com> > *Sent:* Tuesday, March 03, 2020 6:03 AM > *To:* eevans(a)digitaldatatechs.com > *Cc:* users <users(a)ovirt.org> > *Subject:* [ovirt-users] Re: subnets > > > > > > > > On Sat, Feb 29, 2020 at 9:03 PM <eevans(a)digitaldatatechs.com> wrote: > > When I attach a vnic to a vm and try to start it I get the following > message: > > > > - Cannot run VM. There is no host that satisfies current scheduling > constraints. See below for details: > - The host kvm04 did not satisfy internal filter Network because there > are no free virtual functions which are suitable for virtual nic(s) nic3. A > virtual function is considered as suitable if the VF's configuration of its > physical function contains the virtual nic's network/network label. > - The host kvm02 did not satisfy internal filter Network because there > are no free virtual functions which are suitable for virtual nic(s) nic3. A > virtual function is considered as suitable if the VF's configuration of its > physical function contains the virtual nic's network/network label. > - The host kvm01 did not satisfy internal filter > VmToHostsAffinityGroups because it did not match positive affinity rules . > > I am new to ovirt and never had an issue with kvm hypervisor. > > > > Can you please ensure that the checkbox Passthrough of the vNIC profile is > not actived? > > > https://www.ovirt.org/documentation/admin-guide/chap-Logical_Networks.html#… > > > > > > > > Eric Evans > > Digital Data Services LLC. > > 304.660.9080 > > > > *From:* Alex K <rightkicktech(a)gmail.com> > *Sent:* Saturday, February 29, 2020 2:48 PM > *To:* eevans(a)digitaldatatechs.com > *Cc:* users <users(a)ovirt.org> > *Subject:* [ovirt-users] Re: subnets > > > > > > On Sat, Feb 29, 2020, 18:38 <eevans(a)digitaldatatechs.com> wrote: > > I have a network in place with several subnets, one for iscsi and one for > virtual pbx and VoIP phones. I use the iscsi in Ovirt, but I cannot get > Ovirt to recognize and use the physical vlan 3 network for phones. If I add > it and the subnet, Ovirt will make give it an IP, but it's an isolated > network with no connectivity to the other vm's or the Internet. > > You will need to attach a vm to a network in order the vm to have access > to the specific network. This should be straightforward from web gui. > > I have read several topics on this but I can't get it to work properly. > Any help would be appreciated. > Thanks. > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/CYXBJM43M6TR6… > > > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/JNBUBZ3UY4URQ… > > > >

3 2

Changing the Data Warehouse Sampling Scale
by anton.louw＠voxtelecom.co.za 04 Mar '20

04 Mar '20

Hi Everybody, I have a question. When oVirt was deployed in our environment by previous engineers, the DWH was installed as Basic. I would like to change this to Full, to get the daily stats, as this is now empty due to the scale. Is this just as simple as described in the following article: https://www.ovirt.org/documentation/data-warehouse/Changing_the_Data_Wareho… Are there any precautions I should take, and has anybody else ever done this before? Thanks a lot

2 1