New Management VLAN for hyperconverged cluster
by David White
I'm working on setting up my environment prior to production, and have run into an issue.
I got most things configured, but due to a limitation on one of my switches, I decided to change the management vlan that the hosts communicate on. Over the course of changing that vlan, I wound up resetting my router to default settings.
I have the router operational again, and I also have 1 of my switches operational.
Now, I'm trying to bring the oVirt cluster back online.This is oVirt 4.5 running on RHEL 8.3.
The old vlan is 1, and the new vlan is 10.
Currently, hosts 2 & 3 are accessible over the new vlan, and can ping each other.
I'm able to ssh to both hosts, and when I run "gluster peer status", I see that they are connected to each other.
However, host 1 is not accessible from anything. I can't ping it, and it cannot get out.
As part of my troubleshooting, I've done the following:
From the host console, I ran `nmcli connection delete` to delete the old vlan (VLAN 1).
I moved the /etc/sysconfig/network-scripts/interface.1 file to interface.10, and edited the file accordingly to make sure the vlan and device settings are set to 10 instead of 1, and I rebooted the host.
The engine seems to be running, but I don't understand why.
From each of the hosts that are working (host 2 and host 3), I ran "hosted-engine --check-liveliness" and both hosts indicate that the engine is NOT running.
Yet the engine loads in a web browser, and I'm able to log into /ovirt-engine/webadmin/.
The engine thinks that all 3 hosts is nonresponsive. See screenshot below:
[Screenshot from 2021-04-07 17-33-48.png]
What I'm really looking for help with is to get the first host back online.
Once it is healthy and gluster is healthy, I feel confident I can get the engine operational again.
What else should I look for on this host?
Sent with ProtonMail Secure Email.
3 years, 8 months
How to restore Storage Domain from disaster recovery
by miguel.garcia＠toshibagcs.com
My engine drop dead so had to create a new one and I'm trying to recover virtual drives from previous engine. I'm using next instructions to import storage domain https://www.ovirt.org/develop/release-management/features/storage/imports... but in order to do it well need to unattach storage domain from previous engine which that is not possible right now since the engine has died. Anyway discarting requirements I got the following warning message:
This operation might be unrecoverable and destructive!
Storage Domain(s) are already attached to a Data Center. Aproving this operation might cause data corruption if both Data Centers are Active.
Do you have an idea how to deactivate a Storage domain without ovirt-engine?
Is there any chance to export virtual drives as backups without engine?
Thanks in advance.
3 years, 8 months
oVirt 4.4.4 not dislaying Sign-on Screen
by louisb＠ameritech.net
I recently installed oVirt 4.4.4, everything appeared to run successfully, however, I’m unable to get the sign-on screen to display on my RHEL 8.3 machine. I did do an install using the remote database installation. I encountered no issue with the install, I can see the “engine” and “ovirt_engine_history” in PostgreSQL 13.3. The tables and table spaces have all been created as designed by the installation process.
When I enter the URL that was displayed once the installation completed I get the following information displayed on the screen:
Internal Error
I’ve tried using the port 443 and port 80 URL and get the same results. The URL are as follows:
http://WorkstationName:80/ovirt-engine
https://WorkstationName:443/ovirt-engine
For three days I’ve been trying to locate logs that will help me located and resolve the problem, but so far I’ve had no luck.
Can anyone tell where I should start looking to resolve my issue? I’ve checked several system logs and logs for Apache with luck. What should I be looking for within the logs? What logs should I be looking at?
I don’t believe my issue is with the back-end database, I thinks its something with Apache not being able to find the web pages to display. How can I start to investigate my problem an develop a solution?
My Linux/RHEL 8.3 OS has all of the latest patches and fixes applied.
Thanks
3 years, 8 months
Re: Restored engine backup: The provided authorization grant for the auth code has expired.
by Nicolás
Hi Shani,
El 6/4/21 a las 15:15, Shani Leviim escribió:
> Hi,
> Did you try to refresh the page and try again?
Yes, several times. Also different browsers with no difference.
> Can you share a screenshot?
Sure. Adding the screenshot in this e-mail. This happens after
authenticating like admin (internal) on either the administration panel
or the VM portal.
Thanks.
>
> *Regards,
> *
> *Shani Leviim
> *
>
>
> On Tue, Apr 6, 2021 at 4:20 PM Nicolás <nicolas(a)devels.es
> <mailto:nicolas@devels.es>> wrote:
>
> bump...
>
> El 26/3/21 a las 8:21, Nicolás escribió:
> > Please, any help with this?
> >
> > El 24/3/21 a las 10:05, Nicolás escribió:
> >> Hi,
> >>
> >> I'm restoring a full ovirt engine backup, having used the
> --scope=all
> >> option, for oVirt 4.3.
> >>
> >> I restored the backup on a fresh CentOS7 machine. The process went
> >> well, but when trying to log into the restored authentication
> system
> >> I get the following message which won't allow me to log in:
> >>
> >> The provided authorization grant for the auth code has expired.
> >>
> >> What does that mean and how can it be fixed?
> >>
> >> Thanks.
> >>
> >> Nicolás
> >> _______________________________________________
> >> Users mailing list -- users(a)ovirt.org <mailto:users@ovirt.org>
> >> To unsubscribe send an email to users-leave(a)ovirt.org
> <mailto:users-leave@ovirt.org>
> >> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> >> oVirt Code of Conduct:
> >> https://www.ovirt.org/community/about/community-guidelines/
> >> List Archives:
> >>
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/PADF5SSC6XU...
> > _______________________________________________
> > Users mailing list -- users(a)ovirt.org <mailto:users@ovirt.org>
> > To unsubscribe send an email to users-leave(a)ovirt.org
> <mailto:users-leave@ovirt.org>
> > Privacy Statement: https://www.ovirt.org/privacy-policy.html
> > oVirt Code of Conduct:
> > https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
> >
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/5VYLMSCUGDD...
> _______________________________________________
> Users mailing list -- users(a)ovirt.org <mailto:users@ovirt.org>
> To unsubscribe send an email to users-leave(a)ovirt.org
> <mailto:users-leave@ovirt.org>
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/N6Q4EEC3KKK...
>
3 years, 8 months
Engine Upgrade to 4.4.5 Version Number Question
by Nur Imam Febrianto
I’m currently trying to upgrade our cluster from 4.4.4 to 4.4.5. All using oVirt Node.
All host are successfully upgraded to 4.4.5 (I can see the image layer was changed from 4.4.4 to 4.4.5, cockpit also shows same version), but in Engine VM, already run engine-upgrade-check, upgrading ovirt-setup, running engine-setup successfully, reboot the engine but whenever I open the engine web page, it still showing Version 4.4.4.5-1.el8. Is this version correct ? Because my second Cluster that use their own hosted engine shows different version (4.4.5.11-1.el8). Anybody having a same issues like me ?
Thanks before.
Regards,
Nur Imam Febrianto
3 years, 8 months
Re: Upgrading DWH from 4.4.4 to 4.4.5
by Yedidyah Bar David
On Thu, Mar 18, 2021 at 6:47 PM Nur Imam Febrianto <nur_imam(a)outlook.com> wrote:
>
> Hi,
>
>
>
> I’m currently trying to upgrade my oVirt Cluster into 4.4.5. Hosted engine upgrade work successfully. But whenever I tried upgrading DWH on separate machine it keep giving me this error : Failed to execute stage 'Misc configuration': 'OVESETUP_SYSTEM/selinuxBooleans'
>
>
>
> In engine-setup log :
>
>
>
> 2021-03-18 23:34:10,976+0700 DEBUG otopi.context context._executeMethod:145 method exception
>
> Traceback (most recent call last):
>
> File "/usr/lib/python3.6/site-packages/otopi/context.py", line 132, in _executeMethod
>
> method['method']()
>
> File "/usr/share/ovirt-engine/setup/bin/../plugins/ovirt-engine-setup/ovirt-engine-common/apache/selinux.py", line 40, in _misc
>
> osetupcons.SystemEnv.SELINUX_BOOLEANS
>
> KeyError: 'OVESETUP_SYSTEM/selinuxBooleans'
>
> 2021-03-18 23:34:10,977+0700 ERROR otopi.context context._executeMethod:154 Failed to execute stage 'Misc configuration': 'OVESETUP_SYSTEM/selinuxBooleans'
>
>
>
> Using CentOS 8.3 as separate DWH machine. Anybody maybe can help me ?
>
> Thanks before.
Sorry, this is looks like a bug, caused by [1]. Would you like to
report it on bugzilla?
I think a workaround is to run engine-setup like this:
# engine-setup --otopi-environment=OVESETUP_SYSTEM/selinuxBooleans=multi-str:\
The shell will prompt with '> '. Just press Enter.
Martin - seems like I was wrong when commenting on [1] that it seems harmless...
Marcin: we should probably add separate-dwh to ovirt-system-tests or
something like that.
[1] https://gerrit.ovirt.org/c/ovirt-engine/+/113263
Sorry and best regards,
--
Didi
3 years, 8 months
4.4 -> 4.3
by KSNull Zero
Hi,
What is the most simpliest way to backward migrate VMs from oVirt 4.4 to oVirt 4.3 ?
Is it possible to use export domain or there are some other ways ?
Thank you.
3 years, 8 months
EMC Unity300 with iSCSI
by Dan Yasny
Hi all,
I've got a brand new Unity300 that I'm trying to hook up to a 4.3 setup
with iSCSI.
The way I have it organized is simple:
- each hypervisor has two NICs set to 192.168.10.x and 192.168.20.x
- the SAN has 4 ports on each controller (A and B), amounting to 8 portal
IPs I can log into.
The problem with the EMC is that at any time, only either A or B addresses
would be active, so I can only login to 4 out of the 8 addresses, while the
engine, in order to add all the possible target IQNs needs to log into all
8 of them.
I've been trying to find a solution for a while now, EMC generally suggest
I use powerpath (not an option here obviously).
Did anyone set up one of these EMC boxes with oVirt before?
Thanks
3 years, 8 months
Accidentally changed VM Assigned Bridge for Hosted-Engine
by phunyguy＠neverserio.us
Hello, exactly as the title suggests, I did something stupid, and I am not sure how to fix this. I also cannot be certain that this was the exact cause of the problem, as I was troubleshooting another issue with a different VM refusing to start.
What I did by accident, was selected the hosted-engine VM, rather than the VM I was attempting to troubleshoot, and changed the assigned network of the VM adapter to something else, and of course, lost connectivity to the engine VM. This caused HA to kick in and restart the engine, however, like the other VM, it is now refusing to start.
Can anyone give me any pointers? agent/broker/vdsm.log are not showing anything useful that I can see. Thanks in advance.
-phunyguy
3 years, 8 months
