- Users - oVirt List Archives

Re: [ovirt-users] Can´t use a VM Network VLAN, because the Virtual Machines inside can't reach the Gateway
by Donny Davis 01 Jul '15

01 Jul '15

Does your switch have an IP on that vlan... I would step things out VM>host>switch>rtr You have already confirmed VM to host. I'm going to look at your screens again to make sure I didn't miss anything On Jun 30, 2015 9:42 PM, "Julián Tete" <danteconrad14(a)gmail.com> wrote: > Thanks for the explanation :) > > I set everything of the VLANs at oVirt, After I put a IP on the Virtual > Machine. But the Virtual Machine can't reach the gateway, The host can do. > The Virtual Machine only can reach the host. All the machines of the range > of net can reach the Virtual Machine. > > 2015-06-30 20:36 GMT-05:00 Donny Davis <donny(a)cloudspin.me>: > >> I'm asking if your setting the vlan on the VM or at ovirt. >> >> More than likely if you are coming from VMware you have the Vlans set at >> the hypervisor. This does work in ovirt, I am doing it right now >> On Jun 30, 2015 9:31 PM, "Julián Tete" <danteconrad14(a)gmail.com> wrote: >> >>> Mmmm I'm new in oVirt :( >>> >>> VMs Interface is Virtual MachineS Interface or VM Network Interface in >>> the host ? >>> >>> I configured the IP of the VLAN in the host. >>> >>> I double check: the NIC of the Host has the VLAN assigned. >>> >>> Can you help me ? >>> >>> 2015-06-30 20:11 GMT-05:00 Donny Davis <donny(a)cloudspin.me>: >>> >>>> Are you configuring the vms interface with the vlan or tagging at the >>>> host. >>>> On Jun 30, 2015 7:28 PM, "Julián Tete" <danteconrad14(a)gmail.com> wrote: >>>> >>>>> Hi Donny >>>>> >>>>> We have HP Switches (HP 5406zl) and they are configurated on trunk >>>>> mode. (VMware is configurated to use that). >>>>> >>>>> Any suggestion ? >>>>> >>>>> Thanks for your response. >>>>> >>>>> :) >>>>> >>>>> 2015-06-30 17:51 GMT-05:00 Donny Davis <donny(a)cloudspin.me>: >>>>> >>>>>> Vlans are layer 2, sounds like a tagging problem. Cisco switches? The >>>>>> tag sticks to the host bridge, but is being stripped off when it leaves the >>>>>> host.... Is your switch in access mode or trunk? >>>>>> Hi Friends of oVirt >>>>>> >>>>>> I'm trying to migrate my company from VMware to oVirt. >>>>>> In my final tests, I set up 2 more VLANs in oVirt, (VM VLANs) >>>>>> The Virtual Machines in these VLANs, can be reached from the external >>>>>> IPs from the net range, >>>>>> but from the Virtual machines only can ping the Host with the Bridge >>>>>> and itself, can't reach the gateway. ¿? >>>>>> >>>>>> I configured a IP Forwarding in the Host with the virtual machine, >>>>>> and nothing changes... >>>>>> >>>>>> Any idea ? This is the last duty before embrace oVirt in the company. >>>>>> >>>>>> Look to the VLAN 100 configuration (My desired VM Network): >>>>>> >>>>>> http://postimg.org/image/7hrog0a2n/ >>>>>> >>>>>> http://postimg.org/image/68b40i1vr/ >>>>>> >>>>>> http://postimg.org/image/lu6mlshgp/ >>>>>> >>>>>> http://postimg.org/image/540o1qc0t/ >>>>>> >>>>>> http://postimg.org/image/4kyg787bt/ >>>>>> >>>>>> http://postimg.org/image/v7ralh7zb/ >>>>>> >>>>>> http://postimg.org/image/kn903cl03/ >>>>>> >>>>>> For any idea, thanks in advance >>>>>> >>>>>> _______________________________________________ >>>>>> Users mailing list >>>>>> Users(a)ovirt.org >>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>>> >>>>>> >>>>> >>> >

1 1

Re: [ovirt-users] User is not authorized, ldap OK, but no user VM
by Donny Davis 01 Jul '15

01 Jul '15

Can you assign a specific user the power user role that has no VMS assigned to them? Can that user login? On Jun 30, 2015 6:32 PM, "David Smith" <dsmith(a)mypchelp.com> wrote: > The users are attempting to log in via the user portal when they get the > error. > > > On Tue, Jun 30, 2015 at 3:28 PM, Donny Davis <donny(a)cloudspin.me> wrote: > >> The power user role covers login, so that is not your problem. Is this >> on the user portal or webadmin? >> On Jun 30, 2015 6:20 PM, "David Smith" <dsmith(a)mypchelp.com> wrote: >> >>> I used the "everyone" user at the data center level and added the >>> permissions/role of "PowerUserRole" >>> >>> What other permission/role are you saying I should assign? >>> >>> Unfortunately we aren't using an "ldap group" so there's nothing to >>> assign to an ldap group-- the users are filtered in such a manner that if >>> they auth and get through the filter they should have access. >>> >>> On Tue, Jun 30, 2015 at 3:16 PM, Donny Davis <donny(a)cloudspin.me> wrote: >>> >>>> Add login permissions only at the data center for the group. This >>>> allows them to login, but not view anything. You have to create custom >>>> permission to do what you are looking for. >>>> On Jun 30, 2015 6:13 PM, "David Smith" <dsmith(a)mypchelp.com> wrote: >>>> >>>>> Correct, each user has their own VMs. Only a few share VMs (those >>>>> permissions are assigned manually) >>>>> >>>>> The issue is that when they have 0 VMs assigned to them, the system >>>>> throws the login error that they're not authorized, at least until I add a >>>>> placeholder VM so they can log in and set themselves up. >>>>> >>>>> >>>>> On Tue, Jun 30, 2015 at 3:09 PM, Donny Davis <donny(a)cloudspin.me> >>>>> wrote: >>>>> >>>>>> You are looking for this to look like its multi tenant? >>>>>> >>>>>> I setup CloudSpin to do exactly that. Each user can only see their >>>>>> own VMS. >>>>>> Do I have your question correct? >>>>>> >>>>>> Donny D >>>>>> On Jun 30, 2015 5:27 PM, "David Smith" <dsmith(a)mypchelp.com> wrote: >>>>>> >>>>>>> version 3.5.2-1.el6 >>>>>>> using ldap authz; this piece is working OK, and verified OK. >>>>>>> >>>>>>> I use the "Everyone" user to provide default permissions; that >>>>>>> includes PowerUserRole for the data center, a bunch of >>>>>>> usertemplatebasedVMs, some VnicProfileUser, DiskProfileUser, etc. >>>>>>> >>>>>>> I add a new user in LDAP; and verify LDAP credentials work (ie, log >>>>>>> in to another system that uses the same ldap server) >>>>>>> LDAP confirmed working for *other* ovirt users-- not an LDAP issue >>>>>>> as far as I can tell. >>>>>>> >>>>>>> I do *not* specifically add each LDAP user to oVirt, they're added >>>>>>> to "groups" in LDAP, so if they have the right group, they should be able >>>>>>> to authenticate to oVirt and use the system without me adding each user >>>>>>> individually. >>>>>>> >>>>>>> In any case the narrowed down problem is this: >>>>>>> If the user doesn't have permissions (UserRole, etc) for *any* VMs, >>>>>>> instead of logging in and getting a blank VM list, they get "User is not >>>>>>> authorized to perform this action." >>>>>>> >>>>>>> If I add that specific user to a test placeholder VM, they can log >>>>>>> in. Once they have a VM created, I can erase their user-specific >>>>>>> permissions to that initial test VM and everything works as expected. They >>>>>>> are able to log in, create VMs, etc. >>>>>>> >>>>>>> If I remove all permissions for VMs from a user, they get this error. >>>>>>> >>>>>>> Expected behavior: >>>>>>> User without any permissions to any VMs should simply get a blank VM >>>>>>> list on login. That way they can create a VM and go from there. >>>>>>> >>>>>>> Thanks for any help/suggestions, >>>>>>> David >>>>>>> >>>>>>> _______________________________________________ >>>>>>> Users mailing list >>>>>>> Users(a)ovirt.org >>>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>>>> >>>>>>> >>>>> >>> >

1 0

User is not authorized, ldap OK, but no user VM
by David Smith 01 Jul '15

01 Jul '15

version 3.5.2-1.el6 using ldap authz; this piece is working OK, and verified OK. I use the "Everyone" user to provide default permissions; that includes PowerUserRole for the data center, a bunch of usertemplatebasedVMs, some VnicProfileUser, DiskProfileUser, etc. I add a new user in LDAP; and verify LDAP credentials work (ie, log in to another system that uses the same ldap server) LDAP confirmed working for *other* ovirt users-- not an LDAP issue as far as I can tell. I do *not* specifically add each LDAP user to oVirt, they're added to "groups" in LDAP, so if they have the right group, they should be able to authenticate to oVirt and use the system without me adding each user individually. In any case the narrowed down problem is this: If the user doesn't have permissions (UserRole, etc) for *any* VMs, instead of logging in and getting a blank VM list, they get "User is not authorized to perform this action." If I add that specific user to a test placeholder VM, they can log in. Once they have a VM created, I can erase their user-specific permissions to that initial test VM and everything works as expected. They are able to log in, create VMs, etc. If I remove all permissions for VMs from a user, they get this error. Expected behavior: User without any permissions to any VMs should simply get a blank VM list on login. That way they can create a VM and go from there. Thanks for any help/suggestions, David

2 5

CloudSpin is Almost back
by Donny Davis 30 Jun '15

30 Jun '15

Hey guys I know CloudSpin has been down for quite a while. Its taking me a little longer than expected to get up and running again on my new connection. Mainly the lack of ipv6 on my static connection. I am working through it. I promised some server resources to aide in processes above my level, and I am happy to report that the resources are ready. Please email me if you are interested, and we can get the ball rolling. 2x quad cores, 32gb of ram(might be able to get to 64). And 6tb of raw disk space. Dedicated for the Ovirt Project, and what you guys need it to do. This is a physical machine, and as always when I get CloudSpin back up, any VMS you might want or need. Thanks for your patience Donny D CloudSpin.me

1 0

ovirt-engine-3.5.4 branch created
by Sandro Bonazzola 30 Jun '15

30 Jun '15

Hi, just a quick note reminding that ovirt-engine 3.5.4 branch has been created today. Any further patch targeted 3.5.4 must be cherry-picked there too. Thanks, -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

2 2

all in one migration
by nicola.gentile.to 30 Jun '15

30 Jun '15

Good morning, I have currently a server with ovirt installed (all-in-one) and I would like to extend the structure. At the end of the work I would like that structures were composed of the following: - 1 manager (virtualized) - 2 hosts - storage Before beginning this complicated process, I would like to know if it is possible, and how, to rename the old server. I thought to do the following: - change the hostname to the old server (all-in-one) - update the dns server - install the new server manager virtualized with old hostname - add storage - add the new server as a host - expoxt the virtual machines from old server - import the virtual machines to new server - test the virtual machines on new server - shutdown old server - reinstall old server as a host What do you think? Best regards Nicola

3 5

[ANN] oVirt 3.6.0 Second Alpha Release is now available for testing
by Sandro Bonazzola 30 Jun '15

30 Jun '15

The oVirt Project is pleased to announce the availability of the Second Alpha release of oVirt 3.6 for testing, as of June 29, 2015. oVirt is an open source alternative to VMware vSphere, and provides an excellent KVM management interface for multi-node virtualization. The Second Alpha release is available now for Fedora 20, Red Hat Enterprise Linux 6.6, CentOS 6.6 (or similar) and Red Hat Enterprise Linux 7.1, CentOS 7.1 (or similar). The Second Alpha release can also be deployed on Hypervisor Hosts running Fedora 21 and Fedora 22. Experimental support for Debian 8.1 Jessie has been added too. This Second Alpha release of oVirt includes numerous bug fixes. See the release notes [1] for an initial list of the new features and bugs fixed. Please refer to release notes [1] for Installation / Upgrade instructions. A new oVirt Live ISO[2] and Node ISO[3] are already available. Please note that mirrors[4] may need usually one day before being synchronized. Please refer to the release notes for known issues in this release. [1] http://www.ovirt.org/OVirt_3.6_Release_Notes [2] http://resources.ovirt.org/pub/ovirt-3.6-pre/iso/ovirt-live/el7-alpha2/ovir… [3] http://plain.resources.ovirt.org/pub/ovirt-3.6-pre/iso/ovirt-node/ovirt-nod… [4] http://www.ovirt.org/Repository_mirrors#Current_mirrors -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com

1 2

VM run once API required
by Chandrahasa S 30 Jun '15

30 Jun '15

This is a multipart message in MIME format. --=_alternative 0022817E65257E74_= Content-Type: text/plain; charset="US-ASCII" Hi Experts, We are integrating RHEV(M) with our internal cloud portal using RHEV(M) API, we are able to provision Linux VM using API. But IP and Hostname not getting reflected on vm first boot. If we boot VM manually using run once its working fine. We are not able to find any run once API on RHEV end. Requested your help on this. Thanks & Regards Chandrahasa S =====-----=====-----===== Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you --=_alternative 0022817E65257E74_= Content-Type: text/html; charset="US-ASCII" Hi Experts, We are integrating RHEV(M) with our internal cloud portal using RHEV(M) API, we are able to provision Linux VM using API. But IP and Hostname not getting reflected on vm  first boot. If we boot VM manually using run once its working fine. We are not able to find any run once API on RHEV end. Requested your help on this. Thanks & Regards Chandrahasa S =====-----=====-----===== Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you --=_alternative 0022817E65257E74_=--

2 1

how can i setup hosted engine on the ovirt-node-3.5-201504280933
by Zhong Qiang 30 Jun '15

30 Jun '15

I 'm installing oVirt Node using a CD(ovirt-node-iso-3.5-0.999.201504280933.el6.iso),and Ovirt Node is worked. How can i setup hosted engine by using OVirt Node Console?or where can i get the Engine OVA? I can't find any description about this in the " www.ovirt.org". The Console looks like this: " Hosted Engine Setup Hosted Engine: Not configured Engine VM Name: Engine Status: Hosted engine not configured Engine ISO/OVA URL for download: _____________ PXE Boot Engine VM [ ] " Thanks.

1 0

ovirt foreman integration
by Tiemen Ruiten 29 Jun '15

29 Jun '15

Hello, I just tried to add a foreman instance as an external provider in the oVirt UI, but the connection test fails with "unknown error". In the engine.log I see this message: 2015-06-26 14:31:50,900 ERROR [org.ovirt.engine.core.bll.GetProviderCertificateChainQuery] (ajp--127.0.0.1-8702-3) Error in encoding certificate. Error is {} java.io.IOException: Keystore was tampered with, or password was incorrect How can I successfully connect to Foreman? The Foreman instance uses a self-signed certificate btw. -- Tiemen Ruiten Systems Engineer R&D Media

2 2