- Users - oVirt List Archives

Re: [Users] Trouble building Ovirt from source - "No rule to make target `install_tools'. Stop."
by Yuval M 12 Mar '13

12 Mar '13

> Thank you very much for your response. > I did what you suggested and I still get the same exception when trying to enter the administrative portal (I attached the screenshot). > In addition, I see that the ui-plugins directory is empty after restarting the engine-service, so it might not have been used. > > [wil@bufferoverflow ~]$ mkdir -p /home/wil/ovirt-engine/installation/share/ui-plugins > [wil@bufferoverflow ~]$ ls -la /home/wil/ovirt-engine/installation/share/ > total 28 > drwxr-xr-x. 7 wil wil 4096 Mar 11 15:01 . > drwxr-xr-x. 6 wil wil 4096 Mar 8 22:19 .. > drwxr-xr-x. 3 wil wil 4096 Mar 8 22:19 java > drwxr-xr-x. 3 wil wil 4096 Mar 8 22:19 man > drwxr-xr-x. 2 wil wil 4096 Mar 8 22:19 maven-poms > drwxr-xr-x. 11 wil wil 4096 Mar 8 22:19 ovirt-engine > drwxrwxr-x. 2 wil wil 4096 Mar 11 15:01 ui-plugins > [wil@bufferoverflow ~]$ ls /home/wil/ovirt-engine/installation/share/ui-plugins/ > total 8 > drwxrwxr-x. 2 wil wil 4096 Mar 11 15:01 . > drwxr-xr-x. 7 wil wil 4096 Mar 11 15:01 .. > [wil@bufferoverflow ~]$ > > > > > > > > On Mon, Mar 11, 2013 at 9:42 AM, Juan Hernandez <jhernand(a)redhat.com> wrote: >> >> On 03/08/2013 09:48 PM, Yuval M wrote: >>> >>> Thank you very much. I now get the welcome page when I enter >>> "http://localhost:8700/". >>> However, when I try to enter the Administrator Portal >>> <http://localhost:8700/webadmin> I get a javax.servlet.ServletException. >>> I attached a screenshot. >>> >>> Inline image 1 >>> >>> How can I troubleshoot this? >> >> >> I think this is because of the missing UI plugins directory. Try to create it: >> >> mkdir -p $HOME/ovirt-engine/installation/share/ui-plugins >> >> Then restart the engine. >> >>> >>> I appreciate your help very much >>> >>> Yuval >>> >>> >>> On Fri, Mar 8, 2013 at 8:05 PM, Juan Hernandez <jhernand(a)redhat.com >>> <mailto:jhernand@redhat.com>> wrote: >>> >>> On 03/08/2013 07:00 PM, Yuval M wrote: >>> >>> I attached the logs, here is the output from the commands you >>> suggested: >>> >>> >>> Looks like the database schema doesn't match the rest of the code. >>> You probably created the database before switching to branch 3.2. >>> Just drop the database and create it again with the scripts in the >>> 3.2 branch. >>> >>> * >>> * >>> *[root@bufferoverflow bin]# psql -U postgres engine* >>> >>> psql (9.2.3) >>> Type "help" for help. >>> engine=# select count(*) from vdc_options; >>> count >>> ------- >>> 345 >>> (1 row) >>> >>> *[root@bufferoverflow bin]# find >>> /home/wil/ovirt-engine/__installation >>> >>> -name postgresql.jar* >>> *[root@bufferoverflow bin]# find >>> /home/wil/ovirt-engine/__installation >>> -name postg\** >>> /home/wil/ovirt-engine/__installation/share/ovirt-__engine/modules/org/postgresql >>> /home/wil/ovirt-engine/__installation/share/ovirt-__engine/modules/org/postgresql/__main/postgresql-jdbc.jar >>> /home/wil/ovirt-engine/__installation/share/ovirt-__engine/modules/org/postgresql/__main/postgresql-jdbc.jar.index >>> >>> *[root@bufferoverflow bin]# ls -la >>> /home/wil/ovirt-engine/__installation/share/ovirt-__engine/modules/org/* >>> >>> >>> total 12 >>> drwxr-xr-x. 3 wil wil 4096 Mar 8 18:03 . >>> drwxr-xr-x. 3 wil wil 4096 Mar 8 18:03 .. >>> drwxr-xr-x. 3 wil wil 4096 Mar 8 18:03 postgresql >>> *[root@bufferoverflow bin]# ls -la >>> /home/wil/ovirt-engine/__installation/share/ovirt-__engine/modules/org/postgresql/__main/* >>> >>> >>> total 544 >>> drwxr-xr-x. 2 wil wil 4096 Mar 8 18:46 . >>> drwxr-xr-x. 3 wil wil 4096 Mar 8 18:03 .. >>> -rw-r--r--. 1 wil wil 307 Mar 8 18:03 module.xml >>> -rw-rw-r--. 1 wil wil 539705 Mar 7 16:41 postgresql-jdbc.jar >>> -rw-rw-r--. 1 wil wil 545 Mar 8 18:46 postgresql-jdbc.jar.index >>> >>> >>> I appreciate your help >>> >>> Yuval >>> >>> On Fri, Mar 8, 2013 at 7:44 PM, Juan Hernandez >>> <jhernand(a)redhat.com <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>>> wrote: >>> >>> On 03/08/2013 06:38 PM, Yuval M wrote: >>> >>> Thanks, now "./engine-service start" succeeded. >>> /[root@bufferoverflow bin]# ./engine-service start/ >>> /Starting engine-service: >>> [ >>> OK ]/ >>> >>> >>> However, when I try to access "http://localhost:8700" I >>> get an empty >>> page (0 bytes). >>> >>> I see the following errors in >>> >>> /home/wil/ovirt-engine/____installation/var/log/ovirt-____engine/server.log >>> >>> >>> >>> JBAS014777: Services which failed to start: service >>> >>> jboss.deployment.subunit."____engine.ear"."engine-bll.jar".____component.____UsersDomainsCacheManagerServic____e.START: >>> org.jboss.msc.service.____StartException in service >>> >>> jboss.deployment.subunit."____engine.ear"."engine-bll.jar".____component.____UsersDomainsCacheManagerServic____e.START: >>> >>> >>> Failed to start service >>> >>> 2013-03-08 19:27:51,495 ERROR >>> [org.jboss.as.server.____deployment.scanner] >>> >>> >>> (DeploymentScanner-threads - 1) {"JBAS014653: Composite >>> operation failed >>> and was rolled back. Steps that failed:" => {"Operation >>> step-2" => >>> {"JBAS014671: Failed services" => >>> >>> {"jboss.deployment.subunit.\"____engine.ear\".\"engine-bll.__jar\__".component.____UsersDomainsCacheManagerServic____e.START" >>> => "org.jboss.msc.service.____StartException in service >>> >>> jboss.deployment.subunit.\"____engine.ear\".\"engine-bll.jar\____".component.____UsersDomainsCacheManagerServic____e.START: >>> >>> >>> Failed to start service"}}}} >>> >>> Here is the contents of my configuration file: >>> >>> [root@bufferoverflow installation]# cat >>> etc/sysconfig/ovirt-engine >>> # >>> # For descriptions of the parameters and their default >>> values look >>> # at the >>> /usr/share/ovirt-engine/conf/____engine.conf.defaults file. >>> >>> >>> # >>> # Please note that the engine installation tool >>> engine-setup will >>> # append the modified parameters to the end of this file. >>> # >>> JAVA_HOME=/usr/lib/jvm/jre-1.____7.0-openjdk.x86_64 >>> JBOSS_HOME=/home/wil/ovirt-____engine/jboss-as-7.1.1.Final >>> >>> >>> ENGINE_USER=wil >>> ENGINE_GROUP=wil >>> ENGINE_PROXY_ENABLED=false >>> ENGINE_HTTP_ENABLED=true >>> ENGINE_HTTP_PORT=8700 >>> ENGINE_HTTPS_ENABLED=false >>> ENGINE_AJP_ENABLED=false >>> ENGINE_DB_USER=postgres >>> ENGINE_DB_PASSWORD= >>> ENGINE_DEBUG_ADDRESS=0.0.0.0:____8787 < http://0.0.0.0:8787> >>> >>> >>> <http://0.0.0.0:8787> >>> >>> >>> Thank you very much for your help >>> >>> >>> Can you share the server.log and engine.log files? If >>> possible stop >>> the engine, clean the files, start again and then collect and >>> provide the files. >>> >>> Not sure, but I guess that you are having some problem with the >>> database, so please check the following: >>> >>> 1. Try to connect to the database manually: >>> >>> psql -U postgres engine >>> engine# select count(*) from vdc_options; >>> >>> 2. Make sure that the JDBC driver is in the right place and >>> that it >>> points to the right file if it is a symbolic link: >>> >>> find home/wil/ovirt-engine/____installation -name >>> >>> postgresql.jar >>> >>> >>> >>> Yuval >>> >>> On Fri, Mar 8, 2013 at 6:16 PM, Juan Hernandez >>> <jhernand(a)redhat.com <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>>>> wrote: >>> >>> On 03/08/2013 05:14 PM, Yuval M wrote: >>> >>> checked out to 3.2 branch, now the >>> configuration file >>> was as >>> detailed in >>> the wiki. >>> after configuring it I try to start the engine >>> and get: >>> >>> [wil@bufferoverflow bin]$ pwd >>> /home/wil/ovirt-engine/______installation/bin >>> >>> >>> >>> [wil@bufferoverflow bin]$ ./engine-service start >>> Traceback (most recent call last): >>> File "./engine-service", line 23, in <module> >>> import configobj >>> ImportError: No module named configobj >>> [wil@bufferoverflow bin]$ >>> >>> >>> Ok, this is because the service script needs the >>> python-configobj >>> and python-cheetah packages: >>> >>> yum install python-configobj python-cheetah >>> >>> >>> >>> >>> On Fri, Mar 8, 2013 at 5:05 PM, Juan Hernandez >>> <jhernand(a)redhat.com >>> <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>>> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>>>>__> wrote: >>> >>> On 03/08/2013 03:51 PM, Juan Hernandez wrote: >>> >>> On 03/08/2013 03:49 PM, Yuval M wrote: >>> >>> OK, >>> brand new machine, >>> Fedora 18 (x64), >>> Trying to install Ovirt 3.2 from >>> sources >>> according to: >>> http://www.ovirt.org/Building___________Engine_Draft >>> <http://www.ovirt.org/Building_________Engine_Draft> >>> <http://www.ovirt.org/__Building_______Engine_Draft >>> <http://www.ovirt.org/Building_______Engine_Draft>> >>> >>> <http://www.ovirt.org/____Building_____Engine_Draft >>> <http://www.ovirt.org/__Building_____Engine_Draft> >>> <http://www.ovirt.org/__Building_____Engine_Draft >>> <http://www.ovirt.org/Building_____Engine_Draft>>> >>> >>> <http://www.ovirt.org/______Building___Engine_Draft >>> <http://www.ovirt.org/____Building___Engine_Draft> >>> >>> <http://www.ovirt.org/____Building___Engine_Draft >>> <http://www.ovirt.org/__Building___Engine_Draft>> >>> >>> <http://www.ovirt.org/____Building___Engine_Draft >>> <http://www.ovirt.org/__Building___Engine_Draft> >>> <http://www.ovirt.org/__Building___Engine_Draft >>> <http://www.ovirt.org/Building___Engine_Draft>>>> >>> >>> <http://www.ovirt.org/________Building_Engine_Draft >>> <http://www.ovirt.org/______Building_Engine_Draft> >>> >>> <http://www.ovirt.org/______Building_Engine_Draft >>> <http://www.ovirt.org/____Building_Engine_Draft>> >>> >>> >>> <http://www.ovirt.org/______Building_Engine_Draft >>> <http://www.ovirt.org/____Building_Engine_Draft> >>> <http://www.ovirt.org/____Building_Engine_Draft >>> <http://www.ovirt.org/__Building_Engine_Draft>>> >>> >>> >>> >>> <http://www.ovirt.org/______Building_Engine_Draft >>> <http://www.ovirt.org/____Building_Engine_Draft> >>> <http://www.ovirt.org/____Building_Engine_Draft >>> <http://www.ovirt.org/__Building_Engine_Draft>> >>> >>> <http://www.ovirt.org/____Building_Engine_Draft >>> <http://www.ovirt.org/__Building_Engine_Draft> >>> <http://www.ovirt.org/__Building_Engine_Draft >>> <http://www.ovirt.org/Building_Engine_Draft>>>>> >>> >>> Everything is good up to the >>> following stage: >>> "Now you need to do some >>> adjustments to the >>> configuration file >>> >>> >>> >>> $HOME/ovirt-engine/________installation/etc/sysconfig/________ovirt-engine" >>> >>> >>> >>> >>> >>> The "sysconfig" directory does >>> not exist. >>> so does the >>> "ovirt-engine" >>> configuration file (searched >>> through the >>> $HOME/ovirt-engine >>> tree). >>> I didn't find any code in the >>> Makefile >>> >>> ($HOME/ovirt-engine/________repository/Makefile) that >>> >>> >>> >>> would create >>> >>> them, >>> What am I missing? >>> >>> >>> This has changed recently and I >>> didn't update >>> that wiki >>> page. The >>> /etc/sysconig/ovirt-engine file has been >>> replaced by >>> /etc/ovirt-engine/engine.conf. >>> >>> >>> But wait, this change was made in the master >>> branch, not in >>> 3.2, so >>> it shouldn't be a problem. Are you sure >>> you are >>> using the >>> engine_3.2 >>> branch? >>> >>> >>> Thanks, >>> >>> Yuval >>> >>> On Tue, Feb 26, 2013 at 3:25 PM, Juan >>> Hernandez >>> <jhernand(a)redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com >>> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com >>>> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com >> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com >> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>>>>__>__> >>> >>> >>> >>> wrote: >>> >>> On 02/26/2013 02:19 PM, Doron >>> Fediuck wrote: >>> >>> >>> >>> ----- Original Message >>> ----- >>> >>> From: "Yuval M" >>> <yuvalme(a)gmail.com <mailto:yuvalme@gmail.com> >>> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com>> >>> <mailto:yuvalme@gmail.com >>> <mailto:yuvalme@gmail.com> <mailto:yuvalme@gmail.com >>> <mailto:yuvalme@gmail.com>>> >>> <mailto:yuvalme@gmail.com >>> <mailto:yuvalme@gmail.com> >>> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com>> >>> <mailto:yuvalme@gmail.com >>> <mailto:yuvalme@gmail.com> <mailto:yuvalme@gmail.com >>> <mailto:yuvalme@gmail.com>>>> >>> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com> >>> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com>> >>> <mailto:yuvalme@gmail.com >>> <mailto:yuvalme@gmail.com> <mailto:yuvalme@gmail.com >>> <mailto:yuvalme@gmail.com>>> >>> >>> <mailto:yuvalme@gmail.com >>> <mailto:yuvalme@gmail.com> >>> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com>> >>> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com> >>> <mailto:yuvalme@gmail.com <mailto:yuvalme@gmail.com >>>>>> >>> >>> >>> To: "Juan Hernandez" >>> <jhernand(a)redhat.com >>> <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>>> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com >> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>>>> >>> >>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com >> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>>> >>> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com >> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>>>>__>__>__, users(a)ovirt.org >>> >>> <mailto:users@ovirt.org> >>> >>> <mailto:users@ovirt.org <mailto:users@ovirt.org>> >>> >>> <mailto:users@ovirt.org >>> <mailto:users@ovirt.org> <mailto:users@ovirt.org >>> <mailto:users@ovirt.org>>> >>> <mailto:users@ovirt.org >>> <mailto:users@ovirt.org> >>> <mailto:users@ovirt.org <mailto:users@ovirt.org>> >>> <mailto:users@ovirt.org <mailto:users@ovirt.org> >>> <mailto:users@ovirt.org <mailto:users@ovirt.org>>>> >>> >>> <mailto:users@ovirt.org <mailto:users@ovirt.org> >>> <mailto:users@ovirt.org <mailto:users@ovirt.org>> >>> <mailto:users@ovirt.org >>> <mailto:users@ovirt.org> <mailto:users@ovirt.org >>> <mailto:users@ovirt.org>>> >>> <mailto:users@ovirt.org <mailto:users@ovirt.org> >>> <mailto:users@ovirt.org <mailto:users@ovirt.org>> >>> <mailto:users@ovirt.org >>> <mailto:users@ovirt.org> <mailto:users@ovirt.org >>> <mailto:users@ovirt.org>>>>> >>> >>> >>> Cc: "Limor Gavish" >>> <lgavish(a)gmail.com <mailto:lgavish@gmail.com> >>> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com>> >>> <mailto:lgavish@gmail.com >>> <mailto:lgavish@gmail.com> <mailto:lgavish@gmail.com >>> <mailto:lgavish@gmail.com>>> >>> <mailto:lgavish@gmail.com >>> <mailto:lgavish@gmail.com> >>> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com>> >>> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com> >>> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com>>>> >>> >>> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com> >>> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com>> >>> <mailto:lgavish@gmail.com >>> <mailto:lgavish@gmail.com> <mailto:lgavish@gmail.com >>> <mailto:lgavish@gmail.com>>> >>> >>> <mailto:lgavish@gmail.com >>> <mailto:lgavish@gmail.com> >>> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com>> >>> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com> >>> <mailto:lgavish@gmail.com <mailto:lgavish@gmail.com >>>>>> >>> >>> >>> Sent: Sunday, >>> February 24, 2013 >>> 11:38:12 PM >>> Subject: Re: >>> [Users] Trouble >>> building >>> Ovirt >>> from source - >>> "No rule to make target >>> `install_tools'. Stop." >>> >>> >>> >>> >>> Still having >>> trouble with >>> the build >>> process >>> (Ovirt 3.1): >>> $ sudo make >>> ... (success) ... >>> $ sudo make install ... >>> >>> inflating: >>> >>> >>> >>> >>> /usr/local/share/ovirt-engine/__________engine.ear/webadmin.__war/______META-__INF/maven/__org.__ovirt.____engine.ui/______webadmin/pom.xml >>> inflating: >>> >>> >>> >>> >>> /usr/local/share/ovirt-engine/__________engine.ear/webadmin.__war/____404.____html >>> checkdir error: >>> >>> >>> >>> >>> /usr/local/share/ovirt-engine/__________engine.ear/engine-bll.____jar >>> >>> >>> >>> >>> exists but >>> is not directory >>> unable to process >>> >>> >>> >>> >>> engine-bll.jar/org/ovirt/__________engine/core/bll/VdsDeploy$__32.________class. >>> checkdir error: >>> >>> >>> >>> >>> /usr/local/share/ovirt-engine/__________engine.ear/engine-bll.____jar >>> >>> >>> >>> >>> exists but >>> is not directory >>> unable to process >>> >>> >>> >>> >>> engine-bll.jar/org/ovirt/__________engine/core/bll/__________InitBackendServicesOnStartupBe__________an.class. >>> >>> >>> >>> >>> ... >>> make: *** >>> [install_artifacts] Error 2 >>> >>> >>> >>> >>> any insights? >>> >>> >>> Thanks... >>> >>> >>> >>> On Thu, Jan 24, >>> 2013 at 8:52 >>> PM, Juan >>> Hernandez < >>> jhernand(a)redhat.com <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com>> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>>> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com >>>> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com >> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> >>> <mailto:jhernand@redhat.com <mailto:jhernand@redhat.com >> >>> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com> <mailto:jhernand@redhat.com >>> <mailto:jhernand@redhat.com>>>>__> >>> >>> >>> >>> wrote: >>> >>> >>> >>> >>> >>> On 01/24/2013 04:20 PM, >>> Yuval M wrote: >>> >>> >>> Hi, >>> I'm installing >>> Ovirt 3.1 on >>> Fedora >>> using this >>> guide: >>> http://www.ovirt.org/Building_ oVirt_engine#Deploying_engine- >>> >>> config_.26_engine-manage- >>> domains >>> >>> and I'm getting the >>> error in the >>> subject from >>> make. >>> there is indeed no >>> rule for >>> install_tools in >>> the makefile. >>> >>> What am I missing? >>> >>> Those instructions >>> are out >>> of date, >>> use "make >>> install". That >>> installs >>> the files, but you will >>> still need some >>> changes to make the >>> engine >>> work: >>> >>> 1. Create the ovirt >>> user >>> (the engine >>> runs by >>> default with this >>> service, unless you >>> change the >>> /etc/syscofig/ovirt-engine >>> file and >>> add the ENGINE_USER and >>> ENGINE_GROUP >>> parameters): >>> >>> useradd ovirt >>> >>> 2. Create (mkdir -p >>> ...) and >>> change the >>> ownership of the >>> directories >>> that the engine >>> needs to own to >>> ovirt:ovirt (chown >>> ovirt:ovirt ...): >>> >>> /etc/ovirt-engine >>> /var/log/ovirt-engine >>> /var/lock/ovirt-engine >>> >>> /var/lib/ovirt-engine/content >>> /var/lib/ovirt-engine/ >>> deployments >>> /var/tmp/ovirt-engine >>> /var/cache/ovirt-engine >>> >>> 3. Enable the HTTP >>> connector >>> in the >>> engine >>> (the default is >>> to enable >>> only AJP, and that >>> doesn't work >>> without Apache >>> as frontend) >>> adding >>> the following to the >>> /etc/sysconfig/ovirt-engine file: >>> >>> >>> ENGINE_PROXY_ENABLED=false >>> >>> ENGINE_HTTP_ENABLED=true >>> ENGINE_HTTP_PORT=8700 >>> >>> ENGINE_HTTPS_ENABLED=false >>> >>> ENGINE_AJP_ENABLED=false >>> >>> 4. Configure >>> database connection >>> details (the >>> default in >>> development >>> environments is to >>> use the >>> postgres >>> user and >>> the trust mode) >>> adding >>> this to >>> /etc/sysconfig/ovirt-engine: >>> >>> ENGINE_DB_USER=postgres >>> ENGINE_DB_PASSWORD= >>> >>> 5. Make sure that >>> you have the >>> PostgreSQL JDBC >>> driver >>> installed (rpm >>> -q postgresql-jdbc) and >>> install it if >>> needed >>> (yum install >>> postgresql-jdbc). >>> >>> 6. Now you can >>> start the engine >>> running the >>> engine-service >>> script: >>> >>> engine-service start >>> >>> Look at the system >>> log (the file >>> /var/log/messages) and the >>> engine >>> logs (the files >>> /var/log/ovirt-engine/server. >>> log and >>> >>> /var/log/ovirt-engine) for >>> errors. >>> >>> 7. Connect to >>> http://localhost:8700 >>> and you >>> should be able >>> to login >>> with user admin and >>> letmein! >>> as password. >>> >>> Note that I am >>> assuming that >>> you already >>> created the >>> database, and >>> that you want to >>> use this >>> installation for >>> development. If >>> you are >>> looking for an >>> production >>> installation I >>> suggest using the RPMs. >>> >>> Also I tested this >>> with the >>> latest >>> source from the >>> repository, it >>> will not work with >>> older >>> versions. >>> >>> -- >>> Dirección >>> Comercial: C/Jose >>> Bardasano >>> Baos, 9, >>> Edif. Gorbea >>> 3, planta >>> 3ºD, 28016 Madrid, >>> Spain >>> Inscrita en el Reg. >>> Mercantil de Madrid – >>> C.I.F. B82657941 - >>> Red Hat >>> S.L. >>> >>> >>> >>> Any progress here? >>> >>> >>> Yuval, that will not work >>> with 3.1. >>> Please >>> use 3.2 and >>> the following >>> instructions: >>> >>> http://www.ovirt.org/Building___________Engine_Draft >>> <http://www.ovirt.org/Building_________Engine_Draft> >>> <http://www.ovirt.org/__Building_______Engine_Draft >>> <http://www.ovirt.org/Building_______Engine_Draft>> >>> >>> <http://www.ovirt.org/____Building_____Engine_Draft >>> <http://www.ovirt.org/__Building_____Engine_Draft> >>> <http://www.ovirt.org/__Building_____Engine_Draft >>> <http://www.ovirt.org/Building_____Engine_Draft>>> >>> >>> <http://www.ovirt.org/______Building___Engine_Draft >>> <http://www.ovirt.org/____Building___Engine_Draft> >>> >>> <http://www.ovirt.org/____Building___Engine_Draft >>> <http://www.ovirt.org/__Building___Engine_Draft>> >>> >>> <http://www.ovirt.org/____Building___Engine_Draft >>> <http://www.ovirt.org/__Building___Engine_Draft> >>> <http://www.ovirt.org/__Building___Engine_Draft >>> <http://www.ovirt.org/Building___Engine_Draft>>>> >>> >>> >>> <http://www.ovirt.org/________Building_Engine_Draft >>> <http://www.ovirt.org/______Building_Engine_Draft> >>> >>> <http://www.ovirt.org/______Building_Engine_Draft >>> <http://www.ovirt.org/____Building_Engine_Draft>> >>> >>> <http://www.ovirt.org/______Building_Engine_Draft >>> <http://www.ovirt.org/____Building_Engine_Draft> >>> <http://www.ovirt.org/____Building_Engine_Draft >>> <http://www.ovirt.org/__Building_Engine_Draft>>> >>> >>> >>> >>> <http://www.ovirt.org/______Building_Engine_Draft >>> <http://www.ovirt.org/____Building_Engine_Draft> >>> <http://www.ovirt.org/____Building_Engine_Draft >>> <http://www.ovirt.org/__Building_Engine_Draft>> >>> >>> <http://www.ovirt.org/____Building_Engine_Draft >>> <http://www.ovirt.org/__Building_Engine_Draft> >>> <http://www.ovirt.org/__Building_Engine_Draft >>> <http://www.ovirt.org/Building_Engine_Draft>>>>> >>> >>> >>> -- >>> Dirección Comercial: C/Jose >>> Bardasano Baos, >>> 9, Edif. >>> Gorbea 3, >>> planta 3ºD, 28016 Madrid, Spain >>> Inscrita en el Reg. >>> Mercantil de >>> Madrid – C.I.F. >>> B82657941 - Red Hat >>> S.L. >>> >>> >>> >>> >>> >>> _______________________________________________________ >>> >>> >>> Users mailing list >>> Users(a)ovirt.org <mailto:Users@ovirt.org> <mailto:Users@ovirt.org >>> <mailto:Users@ovirt.org>> <mailto:Users@ovirt.org >>> <mailto:Users@ovirt.org> >>> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>> >>> <mailto:Users@ovirt.org <mailto:Users@ovirt.org> >>> <mailto:Users@ovirt.org <mailto:Users@ovirt.org>> >>> <mailto:Users@ovirt.org >>> <mailto:Users@ovirt.org> <mailto:Users@ovirt.org >>> <mailto:Users@ovirt.org>>>> >>> http://lists.ovirt.org/________mailman/listinfo/users >>> <http://lists.ovirt.org/______mailman/listinfo/users> >>> >>> <http://lists.ovirt.org/______mailman/listinfo/users >>> <http://lists.ovirt.org/____mailman/listinfo/users>> >>> >>> >>> <http://lists.ovirt.org/______mailman/listinfo/users >>> <http://lists.ovirt.org/____mailman/listinfo/users> >>> <http://lists.ovirt.org/____mailman/listinfo/users >>> <http://lists.ovirt.org/__mailman/listinfo/users>>> >>> >>> >>> >>> <http://lists.ovirt.org/______mailman/listinfo/users >>> <http://lists.ovirt.org/____mailman/listinfo/users> >>> <http://lists.ovirt.org/____mailman/listinfo/users >>> <http://lists.ovirt.org/__mailman/listinfo/users>> >>> >>> <http://lists.ovirt.org/____mailman/listinfo/users >>> <http://lists.ovirt.org/__mailman/listinfo/users> >>> <http://lists.ovirt.org/__mailman/listinfo/users >>> <http://lists.ovirt.org/mailman/listinfo/users>>>> >>> >>> >>> >>> >>> >>> -- >>> Dirección Comercial: C/Jose Bardasano >>> Baos, 9, >>> Edif. Gorbea 3, >>> planta 3ºD, 28016 Madrid, Spain >>> Inscrita en el Reg. Mercantil de Madrid – >>> C.I.F. >>> B82657941 >>> - Red Hat >>> S.L. >>> >>> >>> >>> >>> -- >>> Dirección Comercial: C/Jose Bardasano Baos, 9, >>> Edif. Gorbea 3, >>> planta 3ºD, 28016 Madrid, Spain >>> Inscrita en el Reg. Mercantil de Madrid – C.I.F. >>> B82657941 >>> - Red Hat >>> S.L. >>> >>> >>> >>> >>> -- >>> Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, >>> planta 3ºD, 28016 Madrid, Spain >>> Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 >>> - Red Hat >>> S.L. >>> >>> >>> >>> >>> -- >>> Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, >>> planta 3ºD, 28016 Madrid, Spain >>> Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat >>> S.L. >>> >>> >> >> >> -- >> Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta 3ºD, 28016 Madrid, Spain >> Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L. > >

2 5

Re: [Users] Users Digest, Vol 18, Issue 79
by xianghuadu 12 Mar '13

12 Mar '13

This is a multi-part message in MIME format. ------=_001_NextPart141836543370_=---- Content-Type: text/plain; charset="gb2312" Content-Transfer-Encoding: base64 SEkNCiAgICAgIEkgd2FudCB0byBhc2sgeW91IGEgcXVlc3Rpb25zIGFib3V0IHRoZSBvdmlydCBz dG9yZSwgd2hlbiBJIGRpZG4ndCB1c2Ugb3ZpcnQsIEkgaGFkIGJ1aWx0IHVwIGJhc2VkIG9uIEtW TSB2aXJ0dWFsaXphdGlvbiBwbGF0Zm9ybS4gSXMgcHJvdmlkZWQgdGhyb3VnaCB0aGUgaXNjc2kg c3RvcmFnZSBzcGFjZS4NCk5vdyBJIHdhbnQgdG8gaW4gdGhlIGRlcGxveW1lbnQgb2YgdmlydHVh bGl6YXRpb24gcGxhdGZvcm1zIG92aXJ0IHBsYXRmb3JtIG1hbmFnZW1lbnQuIEJlZm9yZSBidXQg SSBmb3VuZCB0aGF0IGhhdmUgbm90IGJlZW4gYWJsZSB0byBhZGQgcGFydGl0aW9uIHRvIEtWTSBs dW4sIA0KYWx3YXlzIHByb21wdCBzYWlkOiAiVGhlIGZvbGxvd2luZyBMVU5zIGFyZSBhbHJlYWR5 IGluIHVzZQ0KV2hlbiBJIGNob29zZSB0byBBcHByb3ZlIGFmdGVyIG9wZXJhdGlvbiBhbHdheXMg Y29tcGxhaW5zOiBFcnJvciB3aGlsZSBleGVjdXRpbmcgdGhlIGFjdGlvbiBOZXcgU0FOIFN0b3Jh Z2UgRG9tYWluOiBFcnJvciBjcmVhdGluZyBhIFN0b3JhZ2UgRG9tYWluDQpXaGV0aGVyIG92aXJ0 IGJlZm9yZSBjYW4ndCB1c2UgdGhlIGRpdmlzaW9uIG9mIGx1bnMgdG8gdGhlIEtWTSwgb3IgbmVl ZCB0byBvdGhlciBTZXR0aW5ncy4NCkhvcGUgdG8gZ2V0IHlvdSBoZWxwLCB0aGFuayB5b3UgdmVy eSBtdWNoIQ== ------=_001_NextPart141836543370_=---- Content-Type: text/html; charset="gb2312" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META content=3D"text/html; charset=3DGB2312" http-equiv=3DContent-Type> <STYLE> BLOCKQUOTE { MARGIN-TOP: 0px; MARGIN-BOTTOM: 0px; MARGIN-LEFT: 2em } OL { MARGIN-TOP: 0px; MARGIN-BOTTOM: 0px } UL { MARGIN-TOP: 0px; MARGIN-BOTTOM: 0px } P { MARGIN-TOP: 0px; MARGIN-BOTTOM: 0px } BODY { LINE-HEIGHT: 1.5; FONT-FAMILY: =CE=A2=C8=ED=D1=C5=BA=DA; COLOR: #000080; = FONT-SIZE: 10.5pt } </STYLE> <META name=3DGENERATOR content=3D"MSHTML 8.00.7601.17744"></HEAD> <BODY style=3D"MARGIN: 10px"> <DIV> <DIV>HI</DIV> <DIV>     =20 I want to ask you a questions about&nbs= p;the ovirt store, when I didn't use ov= irt, I had built up based on KVM v= irtualization platform. Is provided through the&n= bsp;iscsi storage space.</DIV> <DIV>Now I want to in the deployment of=  virtualization platforms ovirt platform manageme= nt. Before but I found that have not&nb= sp;been able to add partition to KVM lu= n, </DIV> <DIV>always prompt said: "<SPAN=20 style=3D"COLOR: #ff0000">The following LUNs are alread= y in use</SPAN></DIV> <DIV>When I choose to Approve after operatio= n always complains: <SPAN=20 style=3D"COLOR: #ff0000">Error while executing the act= ion New SAN Storage Domain: Error creating&n= bsp;a Storage Domain</SPAN></DIV> <DIV>Whether ovirt before can't use the divi= sion of luns to the KVM, or need t= o other Settings.</DIV> <DIV>Hope to get you help, thank you ve= ry much!</DIV></DIV></BODY></HTML> ------=_001_NextPart141836543370_=------

3 3

[Users] OpenLDAP Simple Authentication in Ovirt Engine
by Thierry Kauffmann 12 Mar '13

12 Mar '13

>> Hi, >> >> I am currently testing Ovirt 3.1 standalone on Fedora 17. >> >> Until now, I could only use the default user admin@internal. >> >> Our Directory at the University is OpenLDAP. We use it for authentication >> WITHOUT Kerberos : Simple authentication. >> >> I wonder how to use this backend to authenticate users and manage groups >> in Ovirt. >> >> Has anyone already set this up ? >> How to configure Ovirt to use Simple Authentication (No Kerberos). >> >> Cheers, >> >> -- >> Thierry Kauffmann >> Chef du Service Informatique // Facult? des Sciences // Universit? de >> Montpellier 2 >> >> [image: SIF - Service Informatique de la Facult? des Sciences]<http://sif.info-ufr.univ-montp2.fr/> [image: >> UM2 - Universit? de Montpellier 2] <http://www.univ-montp2.fr/> Service >> informatique de la Facult? des Sciences (SIF) >> Universit? de Montpellier 2 >> CC437 // Place Eug?ne Bataillon // 34095 Montpellier Cedex 5 >> >> T?l : 04 67 14 31 58 >> email : thierry.kauffmann(a)univ-montp2.fr >> web : http://sif.info-ufr.univ-montp2.fr/ >> http://www.fdsweb.univ-montp2.fr/ >> >> _______________________________________________ >> Users mailing list >> Users(a)ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> > Hi, > > This is a response from an older thread from Yair Zaslavsky: > > " there is no code allowing to add simple-authentication domains to > Manage-Domains. > In the past we did have the ability to do that, but there are several > problematic issues." > > Best regards, Hi, correct-me if I am wrong but this wiki page (http://www.ovirt.org/DomainInfrastructure) states clearly : > 1. Authenticating Active Directory, IPA and RHDS using either simple > or gssapi authentication > 2. Querying the directory using the LDAP protocol > 3. Auto deducing the LDAP provider type > 4. Easily adding new LDAP provider types > 5. Easily adding new query types > So what ? -- signature-TK Thierry Kauffmann Chef du Service Informatique // Faculté des Sciences // Université de Montpellier 2 SIF - Service Informatique de la Faculté des Sciences <http://sif.info-ufr.univ-montp2.fr/> UM2 - Université de Montpellier 2 <http://www.univ-montp2.fr/> Service informatique de la Faculté des Sciences (SIF) Université de Montpellier 2 CC437 // Place Eugène Bataillon // 34095 Montpellier Cedex 5 Tél : 04 67 14 31 58 email : thierry.kauffmann(a)univ-montp2.fr <mailto:thierry.kauffmann@univ-montp2.fr> web : http://sif.info-ufr.univ-montp2.fr/ http://www.fdsweb.univ-montp2.fr/

7 11

[Users] How to import existing libvirt management KVM virtual machine to the ovirt
by xianghuadu 12 Mar '13

12 Mar '13

This is a multi-part message in MIME format. ------=_001_NextPart536463721454_=---- Content-Type: text/plain; charset="gb2312" Content-Transfer-Encoding: base64 aGkgYWxsDQogICBIb3cgdG8gaW1wb3J0IGV4aXN0aW5nIGxpYnZpcnQgbWFuYWdlbWVudCBLVk0g dmlydHVhbCBtYWNoaW5lIHRvIHRoZSBvdmlydCANCg0KDQoNCg0KeGlhbmdodWFkdQ== ------=_001_NextPart536463721454_=---- Content-Type: text/html; charset="gb2312" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META content=3D"text/html; charset=3Dgb2312" http-equiv=3DContent-Type> <STYLE> BLOCKQUOTE { MARGIN-TOP: 0px; MARGIN-BOTTOM: 0px; MARGIN-LEFT: 2em } OL { MARGIN-TOP: 0px; MARGIN-BOTTOM: 0px } UL { MARGIN-TOP: 0px; MARGIN-BOTTOM: 0px } P { MARGIN-TOP: 0px; MARGIN-BOTTOM: 0px } BODY { LINE-HEIGHT: 1.5; FONT-FAMILY: =CE=A2=C8=ED=D1=C5=BA=DA; COLOR: #000000; = FONT-SIZE: 10.5pt } </STYLE> <META name=3DGENERATOR content=3D"MSHTML 8.00.7601.17744"></HEAD> <BODY style=3D"MARGIN: 10px"> <DIV>hi all</DIV> <DIV>  =20 How to import existing libvirt management KV= M virtual machine to the ovirt=20 </DIV> <DIV> </DIV> <HR style=3D"WIDTH: 210px; HEIGHT: 1px" align=3Dleft color=3D#b5c4df SIZE= =3D1> <DIV><SPAN>xianghuadu</SPAN></DIV></BODY></HTML> ------=_001_NextPart536463721454_=------

2 1

[Users] iSCSI multipath with EqualLogic SAN
by Baptiste AGASSE 11 Mar '13

11 Mar '13

Hi all, I'm testing ovirt 3.1 on centos boxes. I setup ovirt management node and 4 vdsm hosts. vdsm hosts have 2 nics on the SAN subnet. When i create a iscsi storage domain, it use only one of the two nics on the SAN network (showed with iscsiadm -m session on vdsm nodes). Does ovirt support multiples nics on the same subnet for iscsi SAN connection ? Have a nice day. Regards. Baptiste.

6 8

[Users] Exporting backing up Snapshots
by Neil 11 Mar '13

11 Mar '13

Hi guys, I'm working on automating snapshots(not live, just paused) from my oVirt setup at the moment, but I can't seem to find out how to export the snapshots for backing up purposes so they can be moved to another storage domain etc. Please could someone point me in the right direction Thank you! Regards. Neil Wilson.

2 2

[Users] 6.4 CR: oVirt 3.1 breaks with missing cpu features after update to CentOS 6.4 (6.3 + CR)
by Patrick Hurrelmann 11 Mar '13

11 Mar '13

Hi list, I tested the upcoming CentOS 6.4 release with my lab installation of oVirt 3.1 and it fails to play well. Background: freshly installed CentOS 6.3 host in a Nehalem CPU-type Cluster with 2 other hosts. Storage is iSCSI. Datacenter and Cluster are both version 3.1. oVirt 3.1 was installed via Dreyou's repo. In CentOS 6.3 all is fine and the following rpms are installed: libvirt.x86_64 0.9.10-21.el6_3.8 libvirt-client.x86_64 0.9.10-21.el6_3.8 libvirt-lock-sanlock.x86_64 0.9.10-21.el6_3.8 libvirt-python.x86_64 0.9.10-21.el6_3.8 vdsm.x86_64 4.10.0-0.46.15.el6 vdsm-cli.noarch 4.10.0-0.46.15.el6 vdsm-python.x86_64 4.10.0-0.46.15.el6 vdsm-xmlrpc.noarch 4.10.0-0.46.15.el6 qemu-kvm.x86_64 2:0.12.1.2-2.295.el6_3.10 uname -a Linux vh-test1.mydomain.com 2.6.32-279.22.1.el6.x86_64 #1 SMP Wed Feb 6 03:10:46 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux virsh cpu capabilities on 6.3: <cpu> <arch>x86_64</arch> <model>Nehalem</model> <vendor>Intel</vendor> <topology sockets='1' cores='4' threads='1'/> <feature name='rdtscp'/> <feature name='pdcm'/> <feature name='xtpr'/> <feature name='tm2'/> <feature name='est'/> <feature name='smx'/> <feature name='vmx'/> <feature name='ds_cpl'/> <feature name='monitor'/> <feature name='dtes64'/> <feature name='pbe'/> <feature name='tm'/> <feature name='ht'/> <feature name='ss'/> <feature name='acpi'/> <feature name='ds'/> <feature name='vme'/> </cpu> and corresponding cpu features from vdsClient: cpuCores = 4 cpuFlags = fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,mtrr,pge,mca, cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht, tm,pbe,syscall,nx,rdtscp,lm,constant_tsc,arch_perfmon, pebs,bts,rep_good,xtopology,nonstop_tsc,aperfmperf,pni, dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr, pdcm,sse4_1,sse4_2,popcnt,lahf_lm,ida,dts,tpr_shadow,vnmi, flexpriority,ept,vpid,model_Conroe,model_Penryn, model_Nehalem cpuModel = Intel(R) Xeon(R) CPU X3430 @ 2.40GHz cpuSockets = 1 cpuSpeed = 2394.132 So the system was updated to 6.4 using the continuous release repo. Installed rpms after update to 6.4 (6.3 + CR): libvirt.x86_64 0.10.2-18.el6 libvirt-client.x86_64 0.10.2-18.el6 libvirt-lock-sanlock.x86_64 0.10.2-18.el6 libvirt-python.x86_64 0.10.2-18.el6 vdsm.x86_64 4.10.0-0.46.15.el6 vdsm-cli.noarch 4.10.0-0.46.15.el6 vdsm-python.x86_64 4.10.0-0.46.15.el6 vdsm-xmlrpc.noarch 4.10.0-0.46.15.el6 qemu-kvm.x86_64 2:0.12.1.2-2.355.el6_4_4.1 uname -a Linux vh-test1.mydomain.com 2.6.32-358.0.1.el6.x86_64 #1 SMP Wed Feb 27 06:06:45 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux virsh capabilities on 6.4: <cpu> <arch>x86_64</arch> <model>Nehalem</model> <vendor>Intel</vendor> <topology sockets='1' cores='4' threads='1'/> <feature name='rdtscp'/> <feature name='pdcm'/> <feature name='xtpr'/> <feature name='tm2'/> <feature name='est'/> <feature name='smx'/> <feature name='vmx'/> <feature name='ds_cpl'/> <feature name='monitor'/> <feature name='dtes64'/> <feature name='pbe'/> <feature name='tm'/> <feature name='ht'/> <feature name='ss'/> <feature name='acpi'/> <feature name='ds'/> <feature name='vme'/> </cpu> and corresponding cpu features from vdsClient: cpuCores = 4 cpuFlags = fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca, cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht, tm,pbe,syscall,nx,rdtscp,lm,constant_tsc,arch_perfmon, pebs,bts,rep_good,xtopology,nonstop_tsc,aperfmperf,pni, dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr, pdcm,sse4_1,sse4_2,popcnt,lahf_lm,ida,dts,tpr_shadow,vnmi, flexpriority,ept,vpid,model_coreduo,model_Conroe cpuModel = Intel(R) Xeon(R) CPU X3430 @ 2.40GHz cpuSockets = 1 cpuSpeed = 2394.098 Full outputs of virsh capabilities and vdsCaps are attached. The only difference I can see is that 6.4 exposes one additional cpu flags (sep) and this seems to break the cpu recognition of vdsm. Anyone has some hints on how to resolve or debug this further? What more information can I provide to help? Best regards Patrick -- Lobster LOGsuite GmbH, Münchner Straße 15a, D-82319 Starnberg HRB 178831, Amtsgericht München Geschäftsführer: Dr. Martin Fischer, Rolf Henrich

5 14

[Users] Host installation problems. Brigde
by Christer Olsen 11 Mar '13

11 Mar '13

I'm having issues with installing host in oVirt. Manager reports: Failed to install Host localhost. Step: SetNetworking; Details: addNetwork error trying to add management bridge. *** LOG *** Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 517 getAddress Entry. url= http://10.1.1.30:22020/Components/vds/ Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 539 getAddress return. address=10.1.1.30 port=22020 Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 957 makeBridge begin. Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 424 _getMGTIface: read host name: 10.1.1.30 Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 431 _getMGTIface: using host name 10.1.1.30 strIP= 10.1.1.30 Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 437 _getMGTIface IP=10.1.1.30 strIface=eth0 Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 997 makeBridge found the following bridge paramaters: ['NAME=', 'BOOTPROTO=dhcp', $ Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 135 ['/usr/share/vdsm/addNetwork', 'ovirtmgmt', '', '', 'eth0', 'NAME=', 'BOOTPROT$ Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 143 Specified netmask or gateway but not ip Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 144 WARNING:root:options IPADDR is deprecated. Use ipaddr instead WARNING:root:options NETMASK is deprecated. Use netmask instead WARNING:root:options BOOTPROTO is deprecated. Use bootproto instead WARNING:root:options ONBOOT is deprecated. Use onboot instead Traceback (most recent call last): File "/usr/share/vdsm/configNetwork.py", line 1458, in <module> main() File "/usr/share/vdsm/configNetwork.py", line 1427, in main addNetwork(bridge, **kwargs) File "/usr/share/vdsm/configNetwork.py", line 890, in addNetwork bridged=bridged, **options) File "/usr/share/vdsm/configNetwork.py", line 823, in _addNetworkValidation "Specified netmask or gateway but not ip") ConfigNetworkError: (22, 'Specified netmask or gateway but not ip') Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 1037 makeBridge Failed to add ovirtmgmt bridge out=Specified netmask or gateway bu$ err=WARNING:root:options IPADDR is deprecated. Use ipaddr instead WARNING:root:options NETMASK is deprecated. Use netmask instead WARNING:root:options BOOTPROTO is deprecated. Use bootproto instead WARNING:root:options ONBOOT is deprecated. Use onboot instead Traceback (most recent call last): File "/usr/share/vdsm/configNetwork.py", line 1458, in <module> main() File "/usr/share/vdsm/configNetwork.py", line 1427, in main addNetwork(bridge, **kwargs) File "/usr/share/vdsm/configNetwork.py", line 890, in addNetwork bridged=bridged, **options) File "/usr/share/vdsm/configNetwork.py", line 823, in _addNetworkValidation "Specified netmask or gateway but not ip") ConfigNetworkError: (22, 'Specified netmask or gateway but not ip') ret=22 Sun, 10 Mar 2013 19:19:30 ERROR deployUtil 1052 makeBridge errored: out=Specified netmask or gateway but not ip err=WARNING:root:options IPADDR is deprecated. Use ipaddr instead WARNING:root:options NETMASK is deprecated. Use netmask instead WARNING:root:options BOOTPROTO is deprecated. Use bootproto instead WARNING:root:options ONBOOT is deprecated. Use onboot instead Traceback (most recent call last): File "/usr/share/vdsm/configNetwork.py", line 1458, in <module> main() File "/usr/share/vdsm/configNetwork.py", line 1427, in main addNetwork(bridge, **kwargs) File "/usr/share/vdsm/configNetwork.py", line 890, in addNetwork bridged=bridged, **options) File "/usr/share/vdsm/configNetwork.py", line 823, in _addNetworkValidation "Specified netmask or gateway but not ip") ConfigNetworkError: (22, 'Specified netmask or gateway but not ip') ret=22 Sun, 10 Mar 2013 19:19:30 DEBUG deployUtil 1055 makeBridge return. Sun, 10 Mar 2013 19:19:30 ERROR vds_bootstrap 729 addNetwork error trying to add management bridge Sun, 10 Mar 2013 19:19:30 DEBUG vds_bootstrap 278 <BSTRAP component='SetNetworking' status='FAIL' message='addNetwork error t$ Sun, 10 Mar 2013 19:19:30 ERROR vds_bootstrap 1023 setNetworking test failed Sun, 10 Mar 2013 19:19:30 DEBUG vds_bootstrap 1140 <BSTRAP component='RHEV_INSTALL' status='FAIL'/> Sun, 10 Mar 2013 19:19:30 DEBUG vds_bootstrap 1142 **** End VDS Validation **** *** END LOG *** I have tried googling myself to an answer, and i have tried finding it out myself but with no luck. (the host is the same one as the engine is running on) Please, any help would be appreciated. Kind regards

4 3

[Users] debug environment how to?
by bigclouds 11 Mar '13

11 Mar '13

------=_Part_197756_687901158.1362752476157 Content-Type: text/plain; charset=GBK Content-Transfer-Encoding: 7bit 1.how to make a debug environment?include engine and vdsm. 2.if GWT can be disabled,it is a obstacle to debug. thanks ------=_Part_197756_687901158.1362752476157 Content-Type: text/html; charset=GBK Content-Transfer-Encoding: 7bit <div style="line-height:1.7;color:#000000;font-size:14px;font-family:arial"><div>1.how to make a debug environment?include engine and vdsm.</div><div>2.if GWT can be disabled,it is a obstacle to debug.</div><div> </div><div>thanks</div><div> </div><div> </div></div><br><br><span title="neteasefooter"><span id="netease_mail_footer"></span></span> ------=_Part_197756_687901158.1362752476157--

2 1

[Users] NoRouteToHostException when adding F18 host to engine built with latest source.
by snmishra＠linux.vnet.ibm.com 11 Mar '13

11 Mar '13

Hi, I am trying to setup 2 F18 machines as ovirt engine and host. On the first machine I 1. built engine from source, 2. copied vdsm bootstrap files as documented at http://www.ovirt.org/Building_oVirt_engine#Copying_vdsm_bootstrap_files and 3. completed the steps at http://www.ovirt.org/Building_oVirt_engine#Deploying_engine-config_.26_engi… and deployed the engine. Other F18 machine is just a minimal install of F18, iptables running as mentioned at http://www.ovirt.org/Quick_Start_Guide#Install_Fedora_Host I start webadmin and go to add a new host (second F18), but it immediately goes to non-responsive state. 2013-03-08 15:37:26,833 INFO [org.ovirt.engine.core.bll.AddVdsCommand] (http--0.0.0.0-8700-6) [6c833e18] Running command: AddVdsCommand internal: false. Entities affected : ID: 99408929-82cf-4dc7-a532-9d998063fa95 Type: VdsGroups 2013-03-08 15:37:26,868 INFO [org.ovirt.engine.core.bll.AddVdsSpmIdCommand] (http--0.0.0.0-8700-6) [3ad6cd4e] Running command: AddVdsSpmIdCommand internal: true. Entities affected : ID: ca519cc1-7579-4292-9d49-c68aba649991 Type: VDS 2013-03-08 15:37:26,881 INFO [org.ovirt.engine.core.bll.AddVdsSpmIdCommand] (http--0.0.0.0-8700-6) [3ad6cd4e] Lock freed to object EngineLock [exclusiveLocks= key: 5849b030-626e-47cb-ad90-3ce782d831b3 value: REGISTER_VDS , sharedLocks= ] 2013-03-08 15:37:26,883 ERROR [org.ovirt.engine.core.vdsbroker.ResourceManager] (http--0.0.0.0-8700-6) [3ad6cd4e] Cannot get vdsManager for vdsid=ca519cc1-7579-4292-9d49-c68aba649991 2013-03-08 15:37:26,885 INFO [org.ovirt.engine.core.vdsbroker.RemoveVdsVDSCommand] (http--0.0.0.0-8700-6) [3ad6cd4e] START, RemoveVdsVDSCommand(HostName = ovirt2, HostId = ca519cc1-7579-4292-9d49-c68aba649991), log id: 684f7786 2013-03-08 15:37:26,887 ERROR [org.ovirt.engine.core.vdsbroker.ResourceManager] (http--0.0.0.0-8700-6) [3ad6cd4e] Cannot get vdsManager for vdsid=ca519cc1-7579-4292-9d49-c68aba649991 2013-03-08 15:37:26,888 INFO [org.ovirt.engine.core.vdsbroker.RemoveVdsVDSCommand] (http--0.0.0.0-8700-6) [3ad6cd4e] FINISH, RemoveVdsVDSCommand, log id: 684f7786 2013-03-08 15:37:26,889 ERROR [org.ovirt.engine.core.vdsbroker.ResourceManager] (http--0.0.0.0-8700-6) [3ad6cd4e] Cannot get vdsManager for vdsid=ca519cc1-7579-4292-9d49-c68aba649991 2013-03-08 15:37:26,891 INFO [org.ovirt.engine.core.vdsbroker.AddVdsVDSCommand] (http--0.0.0.0-8700-6) [3ad6cd4e] START, AddVdsVDSCommand(HostName = ovirt2, HostId = ca519cc1-7579-4292-9d49-c68aba649991), log id: 35d874d9 2013-03-08 15:37:26,892 INFO [org.ovirt.engine.core.vdsbroker.AddVdsVDSCommand] (http--0.0.0.0-8700-6) [3ad6cd4e] AddVds - entered , starting logic to add VDS ca519cc1-7579-4292-9d49-c68aba649991 2013-03-08 15:37:26,893 INFO [org.ovirt.engine.core.vdsbroker.AddVdsVDSCommand] (http--0.0.0.0-8700-6) [3ad6cd4e] AddVds - VDS ca519cc1-7579-4292-9d49-c68aba649991 was added, will try to add it to the resource manager 2013-03-08 15:37:26,894 INFO [org.ovirt.engine.core.vdsbroker.VdsManager] (http--0.0.0.0-8700-6) [3ad6cd4e] Entered VdsManager constructor 2013-03-08 15:37:26,896 INFO [org.ovirt.engine.core.vdsbroker.VdsManager] (http--0.0.0.0-8700-6) [3ad6cd4e] Initialize vdsBroker (9.27.28.20,54,321) 2013-03-08 15:37:26,897 INFO [org.ovirt.engine.core.vdsbroker.ResourceManager] (http--0.0.0.0-8700-6) [3ad6cd4e] VDS ca519cc1-7579-4292-9d49-c68aba649991 was added to the Resource Manager 2013-03-08 15:37:26,898 INFO [org.ovirt.engine.core.vdsbroker.AddVdsVDSCommand] (http--0.0.0.0-8700-6) [3ad6cd4e] FINISH, AddVdsVDSCommand, log id: 35d874d9 2013-03-08 15:37:29,946 WARN [org.ovirt.engine.core.vdsbroker.VdsManager] (DefaultQuartzScheduler_Worker-9) Failed to refresh VDS , vds = ca519cc1-7579-4292-9d49-c68aba649991 : ovirt2, VDS Network Error, continuing. java.net.NoRouteToHostException: No route to host 2013-03-08 15:37:32,953 WARN [org.ovirt.engine.core.vdsbroker.VdsManager] (DefaultQuartzScheduler_Worker-10) Failed to refresh VDS , vds = ca519cc1-7579-4292-9d49-c68aba649991 : ovirt2, VDS Network Error, continuing. java.net.NoRouteToHostException: No route to host 2013-03-08 15:37:35,987 ERROR [org.ovirt.engine.core.vdsbroker.VdsManager] (DefaultQuartzScheduler_Worker-2) Server failed to respond, vds_id = ca519cc1-7579-4292-9d49-c68aba649991, vds_name = ovirt2, error = java.net.NoRouteToHostException: No route to host I can ssh from engine to host machine using the authentication provided in new host dialog. -Sharad

2 1