- Users - oVirt List Archives

LDAP
by Nicholas Emmerling 20 Mar '20

20 Mar '20

Would you please provide any documentation you have regarding configuring oVirt to work with LDAP. Preferably the guest VMs as well as the Hosts/Nodes themselves. Thank you. nicholas.emmerling(a)me.com Sent from my iPhone

2 1

Error when adding storage domain using VLAN tagging
by briandumont＠gmail.com 20 Mar '20

20 Mar '20

Hello, First post! I'm trying to add a nfs storage domain with VLAN tagging turned on the logical network. It errors out with "Error while executing action Add Storage Connection: Problem while trying to mount target". Couple of notes - I am able to attach to this nfs export from RHV without vlan tagging. I have also verified that I can attach to this nfs export with vlan tagging using a non-ovirt rhel host. Here's my config: - Logical network created at Data Center - Enable Vlan Tagging - ID 15 - Not a VM Network - Cluster status - Network - Up - Assign all - checked - Require - checked - no other boxes checked Host status - Host 1 and Host 2 each show - Status - up - BootP - None (same issue with static IP's) - LinK Layer info shows VLAN ID 15 on switch port Appreciate any help! Brian

1 0

storage use after storage live migration
by Rik Theys 20 Mar '20

20 Mar '20

Hi, We are in the process of migrating our VM's from one storage domain to another. Both domains are FC storage. There are VM's with thin provisioned disks of 16G that currently only occupy 3G according to the interface. When we live migrate the disks (with the VM running), I can see that a snapshot is being taken and removed afterwards. After the storage migration, the occupied disk space on the new storage domain is 6G. Even for a VM that hardly has any writes. How can I reclaim this space? I've powered down the VM and did a sparsify on the disk but this doesn't seem to have any effect. When I do a storage migration of a VM with a thin provisioned disk that is down during the migration, the used disk space does not increase. VM's with fully allocated disks also don't seem to exhibit this behavior. My storage domain now also contains VM with more occupied storage space and the size of the disk?? There are no snapshots listed for those disks. Is there a way to clean up this situation? Regards, Rik -- Rik Theys System Engineer KU Leuven - Dept. Elektrotechniek (ESAT) Kasteelpark Arenberg 10 bus 2440 - B-3001 Leuven-Heverlee +32(0)16/32.11.07 ---------------------------------------------------------------- <<Any errors in spelling, tact or fact are transmission errors>>

2 2

Ovirt API and CLI
by Eugène Ngontang 19 Mar '20

19 Mar '20

Hi, I'm trying to find out there a sort of API or ovirt CLI/SDK in order to be able to interact with my ovirt VMS and associated resources. In my architecture, I have an Ovirt virtualization host, with a self-hosted engine VM to manage VMs. From the host I have the virsh command to list VMs status, but this doesn't really let me get into VMs management actions like : create, delete, get, reboot, get VMs wide informations (IPs, name, disks.....) So each time I have to login to the hosted engine web admin page to explore VM, but I'd really like to play with my Ovirt resources from my command line or programatically. The ovirt API documentation I've found is really poor, I don't know if someone here has already got the same need and had a good solution. Thanks for your help. Regards, Eugène NG -- LesCDN <http://lescdn.com> engontang(a)lescdn.com ------------------------------------------------------------ *Aux hommes il faut un chef, et au* * chef il faut des hommes!L'habit ne fait pas le moine, mais lorsqu'on te voit on te juge!*

8 16

Orphaned ISO Storage Domain
by Bob Franzke 19 Mar '20

19 Mar '20

Greetings all, Full disclosure, complete OVIRT novice here. I inherited an OVIRT system and had a complete ovirt-engine back in December-January. Because of time and my inexperience with OVIRT, I had to resort to hiring consultants to rebuild my OVIRT engine from backups. That's a situation I never want to repeat. Anyway, we were able to piece it together and at least get most functionality back. The previous setup had a ISO storage domain called 'ISO-COLO' that seems to have been hosted on the engine server itself. The engine hostname is 'mydesktop'. We restored the engine from backups I had taken of the SQL DB and various support files using the built in OVIRT backup tool. So now when looking into the OVIRT console, I see the storage domain listed. It has a status of 'inactive' showing in the list of various storage domains we have setup for this. We tried to 'activate' it and it fails activation. The path listed for the domain is mydesktop:/gluster/colo-iso. On the host however there is no mountpoint that equates to that path: [root@mydesktop ~]# df -h Filesystem Size Used Avail Use% Mounted on devtmpfs 47G 0 47G 0% /dev tmpfs 47G 12K 47G 1% /dev/shm tmpfs 47G 131M 47G 1% /run tmpfs 47G 0 47G 0% /sys/fs/cgroup /dev/mapper/centos-root 50G 5.4G 45G 11% / /dev/sda2 1014M 185M 830M 19% /boot /dev/sda1 200M 12M 189M 6% /boot/efi /dev/mapper/centos-home 224G 15G 210G 7% /home tmpfs 9.3G 0 9.3G 0% /run/user/0 The original layout looked like this on the broken engine: [root@mydesktop ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/centos_mydesktop-root 50G 27G 20G 58% / devtmpfs 24G 0 24G 0% /dev tmpfs 24G 28K 24G 1% /dev/shm tmpfs 24G 42M 24G 1% /run tmpfs 24G 0 24G 0% /sys/fs/cgroup /dev/mapper/centos_mydesktop-home 25G 45M 24G 1% /home /dev/sdc1 1014M 307M 708M 31% /boot /dev/mapper/centos_mydesktop-gluster 177G 127G 42G 76% /gluster tmpfs 4.7G 0 4.7G 0% /run/user/0 So it seems the orphaned storage domain is just point to a path that does not exist on the new Engine host. Also noticed some of the hosts are trying to aces this storage domain and getting errors: The error message for connection mydesktop:/gluster/colo-iso returned by VDSM was: Problem while trying to mount target 3/17/2010:47:05 AM Failed to connect Host vm-host-colo-2 to the Storage Domains ISO-Colo. 3/17/2010:47:05 AM So it seems hosts are trying to be connected to this storage domain but cannot because its not there. Any of the files from the original path are not available so I am not even sure what we are missing if anything. So what are my options here. Destroy the current ISO domain and recreate it, or somehow provide the correct path on the engine server? Currently the storage space I can use is mounted with /home, which is a different path than the original one. Not sure if anything can be done with the disk layout at this point to correct this on the engine server itself to get the gluster path back. Right now we cannot attach CDs to VMs for booting. No choices show up for use when doing a 'run once' on an existing VM so I would like to get this working so I can fix a broken VM that I need to boot off of ISO media. Thanks in advance for any help you can provide.

2 1

Gluster Settings
by Christian Reiss 19 Mar '20

19 Mar '20

Hey folks, quick question. For running Gluster / oVirt I found several places, some outdated (ovirt docs), gluster Mailinglists, oVirt Mailinglists etc that recommend different things. Here is what I found out/configured: features.barrier: disable features.show-snapshot-directory: on features.uss: enable cluster.data-self-heal-algorithm: full cluster.entry-self-heal: on cluster.data-self-heal: on cluster.metadata-self-heal: on cluster.readdir-optimize: on transport.address-family: inet storage.fips-mode-rchecksum: on nfs.disable: on performance.client-io-threads: off network.remote-dio: off performance.strict-o-direct: on client.event-threads: 16 cluster.choose-local: true snap-activate-on-create: enable auto-delete: enable Would you agree or change anything (usual vm workload). Thanks! o/ And keep healthy. -- with kind regards, mit freundlichen Gruessen, Christian Reiss

3 4

VNC Encryption
by Tommaso - Shellrent 19 Mar '20

19 Mar '20

Hi to all. We need to set VNC Encryption to disabled on cluster creation, but we do not find any reference on API or SDK to do this automatically. Someone have any kind of hint to do this? -- -- Shellrent - Il primo hosting italiano Security First *Tommaso De Marchi* /COO - Chief Operating Officer/ Shellrent Srl Via dell'Edilizia, 19 - 36100 Vicenza Tel. 0444321155 <tel:+390444321155> | Fax 04441492177

1 0

How to delete events
by xilazz＠126.com 19 Mar '20

19 Mar '20

Hello everybody, there are some wrong log events in the controller. How can I delete the events information after I have checked it?

5 5

Fwd: [ovirt-devel] RESTAPIv3 support has been removed from oVirt master branch
by Sandro Bonazzola 18 Mar '20

18 Mar '20

Forwarding this to user list, maybe someone developed custom scripts and should be aware that v3 has been dropped in 4.4 so they can check their code for compatibility in advance. ---------- Forwarded message --------- Da: Martin Perina <mperina(a)redhat.com> Date: mer 4 mar 2020 alle ore 16:54 Subject: [ovirt-devel] RESTAPIv3 support has been removed from oVirt master branch To: devel <devel(a)ovirt.org> Cc: Ori Liel <oliel(a)redhat.com> Hi, we have just merged https://gerrit.ovirt.org/105297 which removes support for RESTAPIv3. RESTAPIv3 was deprecated in oVirt 4.0 and it didn't provide access to any new features introduced in oVirt 4. The removal of RESTAPIv3 also means that you cannot use any longer Python/Java SDKv3 or oVirt CLI (all of them were also deprecated since 4.0) with oVirt 4.4. Everyone still using those deprecated libraries/tools need to switch to RESTAPIv4, Python/Java/Ruby/Go SDKv4 or oVirt Ansible modules, which provides access to all upcoming features available in oVirt 4.4 or features provided by previous oVirt 4.y releases. Thanks for understanding, Martin -- Martin Perina Manager, Software Engineering Red Hat Czech s.r.o. _______________________________________________ Devel mailing list -- devel(a)ovirt.org To unsubscribe send an email to devel-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/devel@ovirt.org/message/PNFUBS5WZJZLT… -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/>* <https://www.redhat.com/en/summit?sc_cid=7013a000002D2QxAAK>* *Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours. <https://mojo.redhat.com/docs/DOC-1199578>*

1 0

Synology NFS confusion
by Shareef Jalloq 18 Mar '20

18 Mar '20

Hi all, I'm trying to set up a hosted engine on an NFS share provided by a Synology NAS. I've been reading the info and threads regarding the requirement that the share be owned by vdsm:kvm with uid:gid of 36:36, but this seems impossible to set on modern Synology boxes. My understanding of DSM is that the user doesn't have control of the UID and GID of users. You can ssh in and modify /etc/passwd but these files are auto-generated from Synology's own scripts so changes here will not persist across reboots. Is that correct? Secondly, having read lots of posts about permissions and various issues around export settings, why isn't this documented anywhere? There just seems to be lots of contradictory posts. For example, my experience has been: - my Synology vdsm:kvm ids are 1028:65536 - the permissions on the NFS export are 777, anything else gives permissions errors in HE setup - the hosted engine install went fine with these settings. - the nfs-check.py script provided to check the NFS export fails but the installation still completes. So are these issues specific to Synology or is the documentation out there just wrong? #confused Cheers, Shareef.

4 5