- Devel - oVirt List Archives

[Engine-devel] [oVirt 3.4 Localization Question #6] "snapshot Creation/Preview With Memory"
by Yuko Katabami 14 Feb '14

14 Feb '14

This is a multi-part message in MIME format. --------------090306050102080705090503 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hello all, I am a little confused with those two strings and hoping anyone here can help me understand them correctly. *File:*** CommonApplicationConstants* **Resource IDs:* * *snapshotCreationWithMemoryAndPartialDisksWarning snapshotPreviewWithMemoryAndPartialDisksWarning *Strings: * Saving memory may cause data loss when excluding disks! Previewing memory may cause data loss when excluding disks! *Question: * These two strings can be interpreted in a few different ways and I would like have clarification on what they are meant to say. Is "excluding disks" referring to "not including disks to snapshot when creating it?" (Or is it about removing disks?) If you do not include any disks when you create a snapshot, saving in the memory or previewing from the memory may cause data loss? And is "saving" referring to "not using too much" or is it about writing in the memory? Thanks, Yuko --------------090306050102080705090503 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body bgcolor="#FFFFFF" text="#000000"> Hello all, I am a little confused with those two strings and hoping anyone here can help me understand them correctly. File: <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> CommonApplicationConstants Resource IDs: snapshotCreationWithMemoryAndPartialDisksWarning snapshotPreviewWithMemoryAndPartialDisksWarning <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> Strings: <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> Saving memory may cause data loss when excluding disks! Previewing memory may cause data loss when excluding disks! Question: These two strings can be interpreted in a few different ways and I would like have clarification on what they are meant to say. Is "excluding disks" referring to "not including disks to snapshot when creating it?" (Or is it about removing disks?) If you do not include any disks when you create a snapshot, saving in the memory or previewing from the memory may cause data loss? And is "saving" referring to "not using too much" or is it about writing in the memory? Thanks, Yuko <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </body> </html> --------------090306050102080705090503--

3 3

[Engine-devel] [oVirt 3.4 Localization Question #7] "<Empty>"
by Yuko Katabami 14 Feb '14

14 Feb '14

This is a multi-part message in MIME format. --------------080600040902060806000108 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hello again, I have another question on the following string. * File:***CommonApplicationMessages* **Resource ID:* emptyProfile* **String: * <Empty> *Question: *Does this string need to be translated or left in English? Could you tell me where in the GUI it is used? Thank you. Yuko --------------080600040902060806000108 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body bgcolor="#FFFFFF" text="#000000"> Hello again, I have another question on the following string. File: CommonApplicationMessages Resource ID: <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> emptyProfile String: <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> <Empty> Question: Does this string need to be translated or left in English? Could you tell me where in the GUI it is used? Thank you. Yuko <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </body> </html> --------------080600040902060806000108--

2 2

[Engine-devel] [oVirt/RHEV 3.4 Localization Question #1] Strings with resource ID "ActionGroup___"
by Yuko Katabami 13 Feb '14

13 Feb '14

This is a multi-part message in MIME format. --------------010201070801050002020209 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit (sorry I got wrong number in my last email title. re-sending the same question.) Hello all, I am a Brisbane-based translator working on oVirt 3.4 localization project along with 5 other translators. Our localization cycle is just kicked off and I would like to post our questions here, just like I did for 3.3. It would be appreciated if you could help us. Here is our first question. *File:***LocalizedEnums* **Resource ID:***starting with "ActionGroup___"* **Strings:***including Assign vNIC Profile to Template Assign vNIC Profile to VM Assign vNIC Profile to VM Access Image Storage Domains *Question:* In this file, there are number of strings with the resource ID starting with "ActionGroup___". Could you please let me know the usage? Are these actions used to replace variable in strings such as "Cannot ${action} ${type}"? Or is it more like action buttons? Translation may vary depending on the usage/context and it would be helpful if you could give us some extra information. Kind regards, Yuko --------------010201070801050002020209 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body bgcolor="#FFFFFF" text="#000000"> (sorry I got wrong number in my last email title. re-sending the same question.) Hello all, I am a Brisbane-based translator working on oVirt 3.4 localization project along with 5 other translators. Our localization cycle is just kicked off and I would like to post our questions here, just like I did for 3.3. It would be appreciated if you could help us. Here is our first question. File: LocalizedEnums Resource ID: starting with  "ActionGroup___" Strings: including Assign vNIC Profile to Template Assign vNIC Profile to VM Assign vNIC Profile to VM Access Image Storage Domains Question: In this file, there are number of strings with the resource ID starting with  "ActionGroup___". Could you please let me know the usage? Are these actions used to replace variable in strings such as "Cannot ${action} ${type}"? Or is it more like action buttons? Translation may vary depending on the usage/context and it would be helpful if you could give us some extra information. Kind regards, Yuko </body> </html> --------------010201070801050002020209--

2 2

[Engine-devel] [oVirt 3.4 Localization Question #4] "$vmStatus"
by Yuko Katabami 13 Feb '14

13 Feb '14

This is a multi-part message in MIME format. --------------010601010100070903030301 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hello, Sorry to bother you again. I have one more question. * File:***AppErrors* **Resource ID:* start with"VAR__VM_STATUS_"* **Strings:***start with "$vmStatus" *Question: *I would like to check to see if those VM statues should be translated. In the previous releases, we were advised that the statuses included in the listhere <https://gerrit.eng.lab.tlv.redhat.com/gitweb?p=ovirt-engine.git;a=blob_plai…> were untranslated (and these were not pushed to translation). The new strings starting with "$vmStatus" seem to be mostly the same list, but maybe for a different usage? (thus should be translated?) Kind regards, Yuko --------------010601010100070903030301 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body bgcolor="#FFFFFF" text="#000000"> Hello, Sorry to bother you again. I have one more question. File: AppErrors Resource ID: <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> start with"VAR__VM_STATUS_" Strings: start with "$vmStatus" Question: I would like to check to see if those VM statues should be translated. In the previous releases, we were advised that the statuses included in the list<a href="https://gerrit.eng.lab.tlv.redhat.com/gitweb?p=ovirt-engine.git;a=blob_plai…"> here</a> were untranslated (and these were not pushed to translation). The new strings starting with "$vmStatus" seem to be mostly the same list, but maybe for a different usage? (thus should be translated?) Kind regards, Yuko <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </body> </html> --------------010601010100070903030301--

2 2

[Engine-devel] [oVirt 3.4 Localization Question #3] "$action hot set cpus"
by Yuko Katabami 13 Feb '14

13 Feb '14

This is a multi-part message in MIME format. --------------040600040306030100040905 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hello again, I have another question I would like to ask your help. *File:***AppErrors* **Resource ID:* VAR__ACTION__HOT_SET_CPUS* **Strings:***$action hot set cpus *Question: *Could you explain to me about this string? Suppose it is an action to hot-set CPUs, but I am not familiar with the term hot set. Does it mean that you set or change the configuration while the machine/CPU is running (without shutting down)? And this is one of those string that should be part of "Cannot ${action} ${type}." Please correct me if I am wrong. Kind regards, Yuko --------------040600040306030100040905 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body bgcolor="#FFFFFF" text="#000000"> Hello again, I have another question I would like to ask your help. File: AppErrors Resource ID: VAR__ACTION__HOT_SET_CPUS Strings: $action hot set cpus Question: Could you explain to me about this string? Suppose it is an action to hot-set CPUs, but I am not familiar with the term hot set. Does it mean that you set or change the configuration while the machine/CPU is running (without shutting down)? And this is one of those string that should be part of "Cannot ${action} ${type}." Please correct me if I am wrong. Kind regards, Yuko </body> </html> --------------040600040306030100040905--

2 2

[Engine-devel] [oVirt/RHEV 3.4 Localization Question #2] "Gluster Volume migration of data for remove brick finished"
by Yuko Katabami 13 Feb '14

13 Feb '14

This is a multi-part message in MIME format. --------------030600080109040404050703 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hello all, I would like to post another question. *File:***LocalizedEnums* **Resource ID:* AuditLogType___GLUSTER_VOLUME_MIGRATE_BRICK_DATA_FINISHED* **Strings:*** Gluster Volume migration of data for remove brick finished *Question: *I would like to check if my comprehension is correct. Does this mean "Gluster Volume migration of data from removed brick is finished" ? Kind regards, Yuko --------------030600080109040404050703 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body bgcolor="#FFFFFF" text="#000000"> Hello all, I would like to post another question. File: LocalizedEnums Resource ID: <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> AuditLogType___GLUSTER_VOLUME_MIGRATE_BRICK_DATA_FINISHED Strings: <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> Gluster Volume migration of data for remove brick finished Question: I would like to check if my comprehension is correct. Does this mean "Gluster Volume migration of data from removed brick is finished" ? Kind regards, Yuko <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </body> </html> --------------030600080109040404050703--

2 4

[Engine-devel] [oVirt/RHEV 3.4 Localization Question #16] Strings with resource ID "ActionGroup___"
by Yuko Katabami 13 Feb '14

13 Feb '14

This is a multi-part message in MIME format. --------------020603010501060100010609 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hello all, I am a Brisbane-based translator working on oVirt 3.4 localization project along with 5 other translators. Our localization cycle is just kicked off and I would like to post our questions here, just like I did for 3.3. It would be appreciated if you could help us. Here is our first question. *File:***LocalizedEnums* **Resource ID:***starting with "ActionGroup___"* **Strings:***including Assign vNIC Profile to Template Assign vNIC Profile to VM Assign vNIC Profile to VM Access Image Storage Domains *Question:* In this file, there are number of strings with the resource ID starting with "ActionGroup___". Could you please let me know the usage? Are these actions used to replace variable in strings such as "Cannot ${action} ${type}"? Or is it more like action buttons? Translation may vary depending on the usage/context and it would be helpful if you could give us some extra information. Kind regards, Yuko --------------020603010501060100010609 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body bgcolor="#FFFFFF" text="#000000"> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> Hello all, I am a Brisbane-based translator working on oVirt 3.4 localization project along with 5 other translators. Our localization cycle is just kicked off and I would like to post our questions here, just like I did for 3.3. It would be appreciated if you could help us. Here is our first question. File: LocalizedEnums Resource ID: starting with  "ActionGroup___" Strings: including Assign vNIC Profile to Template Assign vNIC Profile to VM Assign vNIC Profile to VM Access Image Storage Domains <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> Question: In this file, there are number of strings with the resource ID starting with  "ActionGroup___". Could you please let me know the usage? Are these actions used to replace variable in strings such as "Cannot ${action} ${type}"? Or is it more like action buttons? Translation may vary depending on the usage/context and it would be helpful if you could give us some extra information. Kind regards, Yuko </body> </html> --------------020603010501060100010609--

1 0

[Engine-devel] Spice proxy test day support
by Doron Fediuck 12 Feb '14

12 Feb '14

Hi all, I was testing this feature today and would like to summarize my findings; 1. Feature page http://www.ovirt.org/Features/Spice_Proxy Quite informative. Nevertheless things we should improve: - Please add a contact person in case of question / issues (feature owner?). - Detail design? Nothing mentioned with regards to the implementation. This could be in a separate page, but in such a case I'd add a link to that page. - Missing specific examples. ie- supported protocols: engine-config -s SpiceProxyDefault=http://my-ip:8080 * Did you know that http is a default if no scheme stated? All the above should make this cool feature more easy to use by non-developers. 2. Test cases - System level (using engine-config) - Cluster level - VM-Pool level For each of the above I configured a proxy, and on the proxy machine used: "nc -l 8080" to capture the traffic. In all cases things worked quite nicely. I saw incoming connection request which is what I expected for. 3. All-in-all: We have the functionality working which is the important part. Going forward we should try to improve some of the things I mentioned above. Nice work, Doron P.S. During my tests I managed to open 2 non-related bugs on engine-config and network QoS mapper (Class cast issue).

2 1

[Engine-devel] [ovirt-testday] Fake PPC Support - Feedback
by Vinzenz Feenstra 12 Feb '14

12 Feb '14

This is a multi-part message in MIME format. --------------070509070905070907070200 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hi, On the test day I was testing the Fake PPC support. I managed to register the Fake PPC host into the engine. However when I tried to run the VM it failed with libvirt responding: * libvirtError: internal error: process exited while connecting to monitor: "kvm" accelerator does not exist.** **No accelerator found!** **KVM not supported for this target** *** Which does not make much sense though. Since it should not try to use 'kvm'. And I am not really sure why it does. Please let me know if there's anything else I would need to provide you so you can figure out what is going on. Right now the server is still in the same state. But I eventually will have to use it for something else. Here's the part of the log which prints the generated DomainXML: Thread-77::DEBUG::2014-01-23 15:43:46,834::vm::3130::vm.Vm::(_run) vmId=`a5409fe7-8054-46ce-91c2-2d565e7edc5b`::<?xml version="1.0" encoding="utf-8"?> <domain type="kvm" xmlns:qemu="http://libvirt.org/schemas/domain/qemu/1.0"> <name>asdfasd</name> <uuid>a5409fe7-8054-46ce-91c2-2d565e7edc5b</uuid> <memory>524288</memory> <currentMemory>524288</currentMemory> <vcpu current="1">1</vcpu> <memtune> <min_guarantee>524288</min_guarantee> </memtune> <devices> <channel type="unix"> <target name="com.redhat.rhevm.vdsm" type="virtio"/> <source mode="bind" path="/var/lib/libvirt/qemu/channels/a5409fe7-8054-46ce-91c2-2d565e7edc5b.com.redhat.rhevm.vdsm"/> </channel> <channel type="unix"> <target name="org.qemu.guest_agent.0" type="virtio"/> <source mode="bind" path="/var/lib/libvirt/qemu/channels/a5409fe7-8054-46ce-91c2-2d565e7edc5b.org.qemu.guest_agent.0"/> </channel> <input bus="usb" type="tablet"/> <graphics autoport="yes" keymap="en-us" listen="0" passwd="*****" passwdValidTo="1970-01-01T00:00:01" port="-1" type="vnc"/> <emulator>/usr/bin/qemu-system-ppc64</emulator> <memballoon model="virtio"/> <controller index="0" type="scsi"> <address type="spapr-vio"/> </controller> <controller index="1" model="virtio-scsi" type="scsi"/> <video> <model heads="1" type="vga" vram="32768"/> </video> <interface type="bridge"> <mac address="00:1a:4a:65:ca:b2"/> <model type="virtio"/> <source bridge="ovirtmgmt"/> <filterref filter="vdsm-no-mac-spoofing"/> <link state="up"/> </interface> <disk device="cdrom" snapshot="no" type="file"> <address bus="0" controller="0" target="0" type="drive" unit="0"/> <source file="" startupPolicy="optional"/> <target bus="scsi" dev="sda"/> <readonly/> <serial/> </disk> <disk device="disk" snapshot="no" type="file"> <source file="/rhev/data-center/mnt/str-02.rhev.lab.eng.brq.redhat.com:_mnt_export_nfs_150_nfs04/efd2a9ce-6417-44e9-ac59-bb577f22bbc3/images/4f6be340-f7b1-4b78-9aa3-7390ffd6bec8/e4f6d99b-c94c-4ae9-8bd6-5212a1d4e9df"/> <target bus="virtio" dev="vda"/> <serial>4f6be340-f7b1-4b78-9aa3-7390ffd6bec8</serial> <boot order="1"/> <driver cache="none" error_policy="stop" io="threads" name="qemu" type="raw"/> </disk> </devices> <os> <type arch="ppc64" machine="pseries">hvm</type> </os> <clock adjustment="0" offset="variable"> <timer name="rtc" tickpolicy="catchup"/> </clock> <cpu> <topology cores="1" sockets="1" threads="1"/> </cpu> <qemu:commandline> <qemu:arg value="-usbdevice"/> <qemu:arg value="keyboard"/> </qemu:commandline> </domain> Thread-77::DEBUG::2014-01-23 15:43:47,566::libvirtconnection::124::root::(wrapper) Unknown libvirterror: ecode: 1 edom: 10 level: 2 message: internal error: process exited while connecting to monitor: "kvm" accelerator does not exist. No accelerator found! KVM not supported for this target Thread-77::DEBUG::2014-01-23 15:43:47,567::vm::2247::vm.Vm::(_startUnderlyingVm) vmId=`a5409fe7-8054-46ce-91c2-2d565e7edc5b`::_ongoingCreations released Thread-77::ERROR::2014-01-23 15:43:47,567::vm::2273::vm.Vm::(_startUnderlyingVm) vmId=`a5409fe7-8054-46ce-91c2-2d565e7edc5b`::The vm start process failed Traceback (most recent call last): File "/usr/share/vdsm/vm.py", line 2233, in _startUnderlyingVm self._run() File "/usr/share/vdsm/vm.py", line 3164, in _run self._connection.createXML(domxml, flags), File "/usr/lib64/python2.7/site-packages/vdsm/libvirtconnection.py", line 92, in wrapper ret = f(*args, **kwargs) File "/usr/lib64/python2.7/site-packages/libvirt.py", line 2920, in createXML if ret is None:raise libvirtError('virDomainCreateXML() failed', conn=self) libvirtError: internal error: process exited while connecting to monitor: "kvm" accelerator does not exist. No accelerator found! KVM not supported for this target Extraction of the capabilities related to this: <guest> <os_type>hvm</os_type> <arch name='ppc'> <wordsize>32</wordsize> <emulator>/usr/bin/qemu-system-ppc</emulator> <machine>g3beige</machine> <machine>prep</machine> <machine>mpc8544ds</machine> <machine>mac99</machine> <machine>ppce500</machine> <machine>virtex-ml507</machine> <machine>bamboo</machine> <machine>taihu</machine> <machine>ref405ep</machine> <machine>none</machine> <domain type='qemu'> </domain> </arch> <features> <cpuselection/> <deviceboot/> </features> </guest> <guest> <os_type>hvm</os_type> <arch name='ppc64'> <wordsize>64</wordsize> <emulator>/usr/bin/qemu-system-ppc64</emulator> <machine>mac99</machine> <machine>prep</machine> <machine>mpc8544ds</machine> <machine>g3beige</machine> <machine>ppce500</machine> <machine>virtex-ml507</machine> <machine>pseries</machine> <machine>bamboo</machine> <machine>taihu</machine> <machine>ref405ep</machine> <machine>none</machine> <domain type='qemu'> </domain> </arch> <features> <cpuselection/> <deviceboot/> </features> </guest> -- Regards, Vinzenz Feenstra | Senior Software Engineer RedHat Engineering Virtualization R & D Phone: +420 532 294 625 IRC: vfeenstr or evilissimo Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com --------------070509070905070907070200 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body text="#000000" bgcolor="#FFFFFF"> Hi, On the test day I was testing the Fake PPC support. I managed to register the Fake PPC host into the engine. However when I tried to run the VM it failed with libvirt responding: libvirtError: internal error: process exited while connecting to monitor: "kvm" accelerator does not exist. No accelerator found! KVM not supported for this target Which does not make much sense though. Since it should not try to use 'kvm'. And I am not really sure why it does. Please let me know if there's anything else I would need to provide you so you can figure out what is going on. Right now the server is still in the same state. But I eventually will have to use it for something else. Here's the part of the log which prints the generated DomainXML: Thread-77::DEBUG::2014-01-23 15:43:46,834::vm::3130::vm.Vm::(_run) vmId=`a5409fe7-8054-46ce-91c2-2d565e7edc5b`::<?xml version="1.0" encoding="utf-8"?> <domain type="kvm" xmlns:qemu=<a class="moz-txt-link-rfc2396E" href="http://libvirt.org/schemas/domain/qemu/1.0">"http://libvirt.org/schemas/domain/qemu/1.0"</a>>         <name>asdfasd</name>         <uuid>a5409fe7-8054-46ce-91c2-2d565e7edc5b</uuid>         <memory>524288</memory>         <currentMemory>524288</currentMemory>         <vcpu current="1">1</vcpu>         <memtune>                 <min_guarantee>524288</min_guarantee>         </memtune>         <devices>                 <channel type="unix">                         <target name="com.redhat.rhevm.vdsm" type="virtio"/>                         <source mode="bind" path="/var/lib/libvirt/qemu/channels/a5409fe7-8054-46ce-91c2-2d565e7edc5b.com.redhat.rhevm.vdsm"/>                 </channel>                 <channel type="unix">                         <target name="org.qemu.guest_agent.0" type="virtio"/>                         <source mode="bind" path="/var/lib/libvirt/qemu/channels/a5409fe7-8054-46ce-91c2-2d565e7edc5b.org.qemu.guest_agent.0"/>                 </channel>                 <input bus="usb" type="tablet"/>                 <graphics autoport="yes" keymap="en-us" listen="0" passwd="*****" passwdValidTo="1970-01-01T00:00:01" port="-1" type="vnc"/>                 <emulator>/usr/bin/qemu-system-ppc64</emulator>                 <memballoon model="virtio"/>                 <controller index="0" type="scsi">                         <address type="spapr-vio"/>                 </controller>                 <controller index="1" model="virtio-scsi" type="scsi"/>                 <video>                         <model heads="1" type="vga" vram="32768"/>                 </video>                 <interface type="bridge">                         <mac address="00:1a:4a:65:ca:b2"/>                         <model type="virtio"/>                         <source bridge="ovirtmgmt"/>                         <filterref filter="vdsm-no-mac-spoofing"/>                         <link state="up"/>                 </interface>                 <disk device="cdrom" snapshot="no" type="file">                         <address bus="0" controller="0" target="0" type="drive" unit="0"/>                         <source file="" startupPolicy="optional"/>                         <target bus="scsi" dev="sda"/>                         <readonly/>                         <serial/>                 </disk>                 <disk device="disk" snapshot="no" type="file">                         <source file="/rhev/data-center/mnt/str-02.rhev.lab.eng.brq.redhat.com:_mnt_export_nfs_150_nfs04/efd2a9ce-6417-44e9-ac59-bb577f22bbc3/images/4f6be340-f7b1-4b78-9aa3-7390ffd6bec8/e4f6d99b-c94c-4ae9-8bd6-5212a1d4e9df"/>                         <target bus="virtio" dev="vda"/>                         <serial>4f6be340-f7b1-4b78-9aa3-7390ffd6bec8</serial>                         <boot order="1"/>                         <driver cache="none" error_policy="stop" io="threads" name="qemu" type="raw"/>                 </disk>         </devices>         <os>                 <type arch="ppc64" machine="pseries">hvm</type>         </os>         <clock adjustment="0" offset="variable">                 <timer name="rtc" tickpolicy="catchup"/>         </clock>         <cpu>                 <topology cores="1" sockets="1" threads="1"/>         </cpu>         <qemu:commandline>                 <qemu:arg value="-usbdevice"/>                 <qemu:arg value="keyboard"/>         </qemu:commandline> </domain> Thread-77::DEBUG::2014-01-23 15:43:47,566::libvirtconnection::124::root::(wrapper) Unknown libvirterror: ecode: 1 edom: 10 level: 2 message: internal error: process exited while connecting to monitor: "kvm" accelerator does not exist. No accelerator found! KVM not supported for this target Thread-77::DEBUG::2014-01-23 15:43:47,567::vm::2247::vm.Vm::(_startUnderlyingVm) vmId=`a5409fe7-8054-46ce-91c2-2d565e7edc5b`::_ongoingCreations released Thread-77::ERROR::2014-01-23 15:43:47,567::vm::2273::vm.Vm::(_startUnderlyingVm) vmId=`a5409fe7-8054-46ce-91c2-2d565e7edc5b`::The vm start process failed Traceback (most recent call last):   File "/usr/share/vdsm/vm.py", line 2233, in _startUnderlyingVm     self._run()   File "/usr/share/vdsm/vm.py", line 3164, in _run     self._connection.createXML(domxml, flags),   File "/usr/lib64/python2.7/site-packages/vdsm/libvirtconnection.py", line 92, in wrapper     ret = f(*args, **kwargs)   File "/usr/lib64/python2.7/site-packages/libvirt.py", line 2920, in createXML     if ret is None:raise libvirtError('virDomainCreateXML() failed', conn=self) libvirtError: internal error: process exited while connecting to monitor: "kvm" accelerator does not exist. No accelerator found! KVM not supported for this target Extraction of the capabilities related to this:   <guest>     <os_type>hvm</os_type>     <arch name='ppc'>       <wordsize>32</wordsize>       <emulator>/usr/bin/qemu-system-ppc</emulator>       <machine>g3beige</machine>       <machine>prep</machine>       <machine>mpc8544ds</machine>       <machine>mac99</machine>       <machine>ppce500</machine>       <machine>virtex-ml507</machine>       <machine>bamboo</machine>       <machine>taihu</machine>       <machine>ref405ep</machine>       <machine>none</machine>       <domain type='qemu'>       </domain>     </arch>     <features>       <cpuselection/>       <deviceboot/>     </features>   </guest>   <guest>     <os_type>hvm</os_type>     <arch name='ppc64'>       <wordsize>64</wordsize>       <emulator>/usr/bin/qemu-system-ppc64</emulator>       <machine>mac99</machine>       <machine>prep</machine>       <machine>mpc8544ds</machine>       <machine>g3beige</machine>       <machine>ppce500</machine>       <machine>virtex-ml507</machine>       <machine>pseries</machine>       <machine>bamboo</machine>       <machine>taihu</machine>       <machine>ref405ep</machine>       <machine>none</machine>       <domain type='qemu'>       </domain>     </arch>     <features>       <cpuselection/>       <deviceboot/>     </features>   </guest> <pre class="moz-signature" cols="72">-- Regards, Vinzenz Feenstra | Senior Software Engineer RedHat Engineering Virtualization R & D Phone: +420 532 294 625 IRC: vfeenstr or evilissimo Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com</pre> </body> </html> --------------070509070905070907070200--

3 3

[Engine-devel] webadmin (vs) rest-api & transition plan
by Sven Kieske 10 Feb '14

10 Feb '14

Hi devs, I want to talk about the current development style and the (somewhat) planned transition from webadmin today to a webadmin which uses REST for communication. I honestly don't see how this goal can be achieved, given the current development pattern, but I may be wrong. e.g. this bug: https://bugzilla.redhat.com/show_bug.cgi?id=1061131 it asks for a feature being available in GUI/webadmin. I'm pretty sure this gets implemented and adds another feature to the list which is not implemented via REST, thus leading to an even higher gap between REST and webadmin. Following this pattern will make the goal of using REST everywhere not easier to achieve. If you really want to build everything upon REST, or at least, transition everything to REST, there should be a policy that new features should be developed for REST access first. I don't know if such a policy is already in place and I know it will take some time for the transition, but what I observe leads me to the conclusion that the gap gets greater. What do you think? Are there any plans inside RH which I don't know regarding this transition? Maybe something you can share with your REST-Users? -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH & Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen

3 2